e65b619faa
Convert to use ether_ioctl() for SIOCSIFADDR and SIOCSIFFLAGS.
2001-06-18 11:06:26 +00:00
49ed2592ce
Add my copyrigth and remove the older ones. None of the original authors of
...
the st driver wrote something in this file.
2001-06-18 09:41:06 +00:00
0a63f01fef
Snapshot of ATAPI tapes support. Known to be able to read/write to tape with:
...
st0 at atapibus0 drive 1: <Seagate STT8000A, , 5.51> type 1 sequential
removable
Major changes may still happen in order to properly support other ATAPI
tape drives.
2001-06-18 09:05:05 +00:00
1506d21315
Make error checking/reporting a little more correct.
2001-06-18 01:58:08 +00:00
de98ab5b38
Regen.
2001-06-17 19:51:27 +00:00
b63b6d01e6
Add device IDs on the new iBook.
2001-06-17 19:50:33 +00:00
adaaf11f9f
make pckbc_slot_names[], pckbc_portcmd const
2001-06-17 16:15:41 +00:00
4c49d6fa2a
Split the Tx and Rx interrupt routines into separate functions,
...
and add some (optional) event counters.
2001-06-15 22:16:00 +00:00
f71391cb6c
Move the check for successful attachment to earlier in the detach
...
routine, to avoid referencing nonexistent data structures.
2001-06-15 18:05:36 +00:00
ddc6e8e6ad
I've got an 8-bit Ether3, so I've discovered that the address mapping is
...
non-linear. Comment it here so I don't forget.
2001-06-15 00:28:01 +00:00
60a0137d9c
Ooops- we need to allocate an array of pointers to scsipi_xfer structures
...
isp_maxcmds in length- not an array of scsipi_xfer structures isp_maxcmds
in length.
2001-06-14 19:54:07 +00:00
4d51fe368b
change the meaning of ifnet.if_lastchange to meet RFC1573 ifLastChange.
...
follows BSD/OS practice and ucd-snmp code (FreeBSD does it for specific
interfaces only).
was: if_lastchange get updated on every packet transmission/receipt.
now: if_lastchange get updated when IFF_UP is changed.
2001-06-14 05:44:23 +00:00
669f5cc5a5
It's silly to need a parity rebuild after a reconstruction has completed.
...
If we've just reconstructed a disk, then the parity is known to
be correct. (XXX doesn't hold for RAID 6!)
2001-06-14 02:35:56 +00:00
3078a3d26d
It's pretty questionable to printf a PCI tag, but if we're going to
...
do so, at least make the printf compile across the board.
2001-06-14 01:06:56 +00:00
a9d7b546d6
make this work.
2001-06-13 19:02:13 +00:00
bb5ca33de4
Add a driver for the HCCS IDE interface I got at Wakefield. Like the D.T.
...
Software one (dtide), it doesn't generate interrupts, so we run it in polled
mode.
2001-06-13 18:31:43 +00:00
18c4c9eab3
Update to use the new support for IRQ-less IDE controllers.
...
Also generally re-work to do channel attachment in a loop, since that saves on
code size.
2001-06-13 18:29:40 +00:00
6acf237023
Use the new generic mechanism for forcing polling on a SCSI interface, rather
...
than doing it ourselves.
2001-06-13 18:27:27 +00:00
4bc5a3b295
Add explicit support for IDE and SCSI adaptors which don't support interrupts.
...
On such adaptors, all transfers are done in polling mode.
OK'ed by Manuel on tech-kern.
2001-06-13 18:17:38 +00:00
a865af9ad5
Enable attachment for Kingston KNE-PC2 Ethernet.
2001-06-13 13:41:01 +00:00
c03a48d64f
withough -> without
2001-06-13 10:45:57 +00:00
e13606c37b
Workaround for buggy OPTi pciide chipset revisions, as reported
...
in PR/11644.
2001-06-13 09:55:25 +00:00
d9db68b3fe
be more specific about which interlan controller the qbus/if_il supports
2001-06-13 06:40:19 +00:00
6c4e6292a5
Regen; add IBM 405GP PCI Bridge & ROB-in i960RP Microprocessor.
2001-06-13 06:04:25 +00:00
18b2f7e6a1
Add a port to IBM's PPC405GP Reference Board (the "walnut")
...
by Eduardo Horvath and Simon Burge of Wasabi Systems.
IBM 4xx series CPU features:
- New pmap and revised trap handler.
- Support on-chip timers, PCI controller, UARTs
- Framework for on-chip ethernet and watchdog timer.
General PowerPC features:
- Add in-kernel PPC floating point emulation
- New in{,4}_cksum that is between 1.5 and 5 times faster than the
old version depending on CPU type.
General changes:
- Kernel support for generic dbsym-style symbols.
2001-06-13 06:01:44 +00:00
015345c74b
Don't need INET or NS includes here.
2001-06-12 22:32:51 +00:00
9988acd41e
Don't need INET or NS includes here.
2001-06-12 22:28:15 +00:00
e103dbb4b0
Don't need NS-related headers here.
2001-06-12 22:05:53 +00:00
18e8d752f6
No need to pull in INET or NS headers -- that's all done by ether_ioctl() now.
2001-06-12 20:53:39 +00:00
0a600be867
receive, not recieve
2001-06-12 15:17:10 +00:00
2a8c778f1b
retrieve, not retreive
2001-06-12 14:59:27 +00:00
cb6b68a931
Mention where I got the information for writing the driver.
2001-06-12 11:52:03 +00:00
f6f3c9b35f
Add a hefty comment about the stray IR bug, so I don't forget it.
2001-06-12 11:49:18 +00:00
b50f28c38a
underrun, not underun
2001-06-12 11:48:51 +00:00
1f4eee4c21
In wsfont_map_unichar: when checking that 'lo' is within 'map2' range,
...
compare 'lo', not 'hi' (only partially edited cut-n-paste it seems).
2001-06-12 00:57:10 +00:00
33afab3251
Add a short-circuit return from wdcprobe for IDE controllers without pullup
...
resistors, which return the last value written to the bus on a read. This
makes detecting empty channels on my HCCS and D.T. Software IDE interfaces
rather faster.
2001-06-11 21:18:36 +00:00
fb2f3ce7e5
Regen; Add Level One vendor ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:13:49 +00:00
ec5280c1ed
Add Level One product ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:12:29 +00:00
274629aa08
Added support for the VME `sc' SCSI board. Compiles,
...
but needs testers as the author doesn't actually have
the hardware.
2001-06-11 15:09:54 +00:00
b9e61207ff
Add nolun/nosync quirk for "IBM CDRM00201 !F"
...
See PR#13031.
2001-06-11 13:58:18 +00:00
a2c4938b03
not set HPCFB_SWAP_BYTE
2001-06-11 09:36:44 +00:00
a4401a8e5d
Regen from "pcidevs".
2001-06-11 06:36:51 +00:00
6caf1041cb
Add support for the D-Link DFE-530TX+. Patch supplied by
...
Gabriel Rosenkoetter in PR kern/13161.
2001-06-11 06:36:23 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
0a3b1c29a1
transceiver, not transciever.
2001-06-11 01:19:53 +00:00
6fee8596c7
Packet includes CRC, so mark it in the mbuf header. Fixes the
...
"discarding oversize frame (len=1518)" problem.
2001-06-10 21:53:08 +00:00
01c6253206
Only use b_proc if B_PHYS is set.
2001-06-10 18:41:27 +00:00
d29b7bb88c
Regen from "usbdevs".
2001-06-10 13:10:46 +00:00
8a6a34f18e
Add Philips PCA646VC PC Camera.
2001-06-10 13:10:25 +00:00
5a051092e4
Rename ofb_softc to ofbus_softc. (XXX Is this good name?)
2001-06-10 11:36:03 +00:00
bfac43a1c8
Centralise the geometry fudge.
2001-06-10 10:48:42 +00:00
5f1286dfb9
Don't make assumptions about the contents of the system drive table.
2001-06-10 10:34:44 +00:00
737763fde7
Forgot to commit this as part of the mvme68k evcnt(9) changes.
2001-06-10 08:27:42 +00:00
acf06d2e27
If the adapter is returning a selection timeout, then we should be
...
returning XS_SELTIMEOUT, not XS_TIMEOUT. Pointed out by Andrew Doran.
2001-06-09 18:08:20 +00:00
8c948a0386
Patches from takashi.yamamoto@bigfoot.com in kern/13139.
...
- Set XS_TIMEOUT on a selection timeout condition.
- Do not bother to call AscStartChip() in AscResetChipAndScsiBus()--
just clear the chip status.
- Make sure address is word-aligned in AscWriteLramByte().
Tested on my adv (AdvanSys ABP-9xxUA) with CRW8424S and UMAX SuperVista S-12.
Earlier versions of the system would get stuck trying to recover from error
conditions when the CD-RW drive was in heavy use. I have not seen that
behavior with these small patches.
2001-06-09 17:18:21 +00:00
810a0b00f4
dtide is MI now.
2001-06-09 13:51:49 +00:00
14f1650c62
Remove unused members from SCSI command block structure.
2001-06-09 13:43:02 +00:00
9cd36c6539
Fix an uninitialized variable in #ifdef DIAGNOSTIC.
...
Pointed out by soda.
2001-06-09 12:59:50 +00:00
e609865bbc
Correct reference to dtide.c, and don't bother with the "channel" locator to
...
dtide, since ata provides that anyway.
2001-06-08 22:33:59 +00:00
ca2047f7c6
Adapt the dtide driver to the MI podulebus framework, and move it to its new
...
home. It still doesn't actually work, but that's a SMOP.
2001-06-08 20:13:24 +00:00
837afd713e
Regen
2001-06-08 20:09:07 +00:00
e918a481e5
Move D.T. Software to their rightful place in the list, and correct the product
...
ID for their IDE interface. I've no idea where 0x00ae came from.
2001-06-08 20:08:35 +00:00
054673b07c
#endif /* takes no argument */
2001-06-08 12:51:17 +00:00
578730c551
Initialize sc->sc_anegticks to 5 on attach to prevent panic due to
...
assertion failure.
2001-06-08 07:09:40 +00:00
e5bd00e48d
For ports that wire up pciide in compatibility mode, have
...
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.
Ports that don't need to do this no longer need to supply a
dummy function.
2001-06-08 04:48:54 +00:00
ef047f21f8
Add multiple inclusion protection. Define prototypes for openfirm
...
routines used in cdevsw.
2001-06-08 00:19:17 +00:00
59024512bd
LKM friendly: move ev_out32() to netbsd32 specific code; add an ev_out32 hook.
2001-06-07 17:52:52 +00:00
7a3a78cfa3
Compile on sandpoint.
2001-06-07 16:48:09 +00:00
df4739c8cb
Set TI_OPMODE_1_DMA_ACTIVE only if hardware assisted checksum isn't used
...
(FreeBSD does it this way). My Tigon II works with hardware assisted checksum
now.
2001-06-07 14:35:58 +00:00
85fb541842
Fix typo; print sc->aue_intr_errs instead of sc->aue_rx_errs when
...
reporting interrupt errors.
2001-06-07 10:55:15 +00:00
72510eee6d
Make the WDC_{ATA|ATAPI}_NOSTREAM flags settable through configuration
...
options. Needed on the Atari Milan.
2001-06-07 06:33:48 +00:00
ff5871412e
Correct the receive mode mask in the RXCMD register.
2001-06-07 05:19:26 +00:00
025decbccb
Don't clear a callout on a scsipi_xfer that has been scsipi_done()'d.
2001-06-07 03:44:00 +00:00
26603afde8
Update URL to documentation PDF.
2001-06-06 22:11:42 +00:00
03e1c3aa16
implement HPCFB_SWAP_BYTE.
2001-06-05 17:29:12 +00:00
b596bfa2d0
add vc_reverse flag to struct video_chip.
2001-06-05 15:02:40 +00:00
a4221d6b08
change behavior of cmap_work_alloc().
2001-06-05 15:02:12 +00:00
15f8692183
Make some functions __inline.
2001-06-05 12:42:44 +00:00
8ee014b439
Handle the DL10022 case.
2001-06-05 02:31:16 +00:00
c619444a71
Use the DL10019 media routines on the DL10019 and DL10022 (a change
...
I forgot to commit long ago).
2001-06-05 02:27:02 +00:00
cae5d5a796
Lock the kernel lock at interrupt enter.
2001-06-04 21:31:28 +00:00
46762d3560
fix lint exposed by GCC 3.0 20010604 (prerelease).
2001-06-04 20:56:51 +00:00
859a6a49b2
ANSI KNF.
2001-06-04 18:59:31 +00:00
07677cc805
Use back the 'u'&037 form - since it's CTRL-u, it's more readable that way
...
Use \007 instead of symbolic constant, since that's what is more often used.
Pointed out by Robert Elz.
2001-06-04 09:45:03 +00:00
147c9186b5
Remove overly paranoid test (and not in the spec either). From OpenBSD.
2001-06-04 06:01:40 +00:00
d7079b251e
Regen.
2001-06-04 06:00:43 +00:00
db2a5598b4
Add the Logitech iFeel mouse.
...
(Now that's a weird device, perhaps I'll write a driver for the vibration
feedback.)
2001-06-04 06:00:20 +00:00
13aba87bcb
Don't pass nonpositive repeat count to CSR_*_MULTI_2.
...
Should fix kern/13092.
2001-06-04 03:34:47 +00:00
4cfd2cf1d0
s/printf/DPRINTF/ for kern/13101.
2001-06-03 23:52:51 +00:00
dccf11ae11
cngetsn(): cosmetic only - use '\025' instead 'u'&037, and '\b' instead '\007'
2001-06-03 17:56:10 +00:00
056e20f2cc
Need to get the kernel lock when entering by interrupts.
2001-06-03 15:15:02 +00:00
461a7daf74
fix comment
2001-06-03 14:29:42 +00:00
bcdd082840
Add a driver for the Initio INIC-940/950 PCI SCSI controllers.
...
Based on OpenBSD's iha driver, and modified some structures by me.
Tested on arc, i386 and macppc.
2001-06-03 13:43:45 +00:00
4e7cb03446
Differentiate between a DL10019 and a DL10022 (they have slight
...
MII differences).
2001-06-03 04:52:28 +00:00
37368cb858
Use the correct bitbang ops on the DL10022 (oops!).
2001-06-03 04:39:52 +00:00
cc3002d53b
Clarify a historical comment.
2001-06-03 03:55:10 +00:00
f75e45c854
In ti_init2(), use a simpler, more obvious, and correct MTU
...
calculation to give the firmware.
2001-06-03 03:46:43 +00:00
f2b9a1f3cc
Replace a bunch of home-grown Ethernet related constants with
...
ones defined in <net/if_ether.h>
2001-06-03 03:29:44 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
424f7a1e65
Make PHY matching all table-driven.
2001-06-02 21:39:38 +00:00
947699688a
Create hcscreg.h, and put a couple of magic numbers in there.
2001-06-02 20:13:50 +00:00
ca4d373730
Implement support for IP/TCP/UDP checksum offloading provided by
...
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 16:17:06 +00:00
9590a56496
Use bus_space_{read,write}_multi_stream_2 where available.
2001-06-02 15:49:16 +00:00
fd7e9d6d32
Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are
...
unique anyway. Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
2001-06-02 12:07:34 +00:00
e9ff9b9d73
Enable disconnect/reselect (now that it works) and parity checking.
2001-06-02 11:43:40 +00:00
2da55b9a39
Define some extra configuration block bits used on the i82550 (a.k.a.
...
PRO 100/S), including the extended RFA format. Don't hard-code the
RFA size to allow us to use the extended format in the future.
2001-06-02 01:04:01 +00:00
f6af05f407
Back the last revision off, upon Bill Sommerfeld's request
2001-06-02 00:46:00 +00:00
5dbe622e77
When polling, raise priority level to tty, to block keyboard interrupts
...
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.
Discussed on tech-kern@.
2001-06-02 00:01:04 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
1331bcc296
cardbusvar.h is divided into two files: cardbusvar.h and cardbusreg.h.
2001-06-01 10:30:37 +00:00
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
b3e7ecfd97
Delete the XXX'd includes of <dev/isa/isavar.h> and <sys/kernel.h>.
...
These aren't needed. Tested on i386 and alpha.
2001-06-01 00:38:31 +00:00
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
2128d9199a
Enable frobbing the 1000baseT control register on Gig-E PHYs,
...
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
2001-05-31 18:44:48 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
ea1aed7db2
Make the number of ticks between auto-negotiation tries PHY-specific,
...
and default every PHY to 5 seconds (what we used before). If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
2001-05-31 16:02:29 +00:00
f4afeda420
Reduce the delay when polling so that dumps go faster.
2001-05-31 11:31:43 +00:00
4d3b32a658
Cosmetic change.
2001-05-31 08:33:40 +00:00
ad090e7062
Regen; added NatSemi DP83891.
2001-05-31 03:32:38 +00:00
3ae72855b1
Add product ID for the NatSemi DP83891 1000baseTX PHY.
2001-05-31 03:32:20 +00:00
9f63d3cd86
Typo in last.
2001-05-31 03:07:14 +00:00
f07f44812d
The 1000baseT CR and SR are overlapped with the 100base-T2 CR and SR.
...
Note this in a comment. Add the 1000baseT CR and SR bits.
2001-05-31 03:06:46 +00:00
e7c225d7b2
Regen; product IDs for IDT RC32334 and RC32332 systeml controllers.
2001-05-31 01:13:33 +00:00
811d8d9102
Add product IDs for IDT RC32234 and RC32334 system controllers.
2001-05-31 01:10:34 +00:00
3fccfbf68d
Uninitialised variables, from Krister Walfridsson: in umass_scsipi_request()
...
initialize cmd before using it. Now that it's initialised earlier, use it
instead of xs->cmd
2001-05-30 20:31:39 +00:00
6973b27309
Uninitialised variable (from Krister Walfridsson): in acard_chip_map()
...
drop compatchan and use the real channel number instead.
2001-05-30 20:30:02 +00:00
708bb529d3
uninitialised variable (from Krister Walfridsson):
...
in st_cmprss(), init flags to 0 (never changed, but this should change soon
anyway, for ATAPI tapes support)
2001-05-30 20:28:17 +00:00
d84d2c6c85
add missing #include "opt_kgdb.h"
2001-05-30 15:24:23 +00:00
c13e3a6693
use _KERNEL_OPT
2001-05-30 11:40:35 +00:00
f591dd2f9d
Cosmetic change.
2001-05-30 09:21:47 +00:00
ffcbc851a0
fix some problems in sddump() with uninitialized variables.
2001-05-29 01:02:39 +00:00
c5260261ba
Use the pseudo-DMA facilities of the HCCS SCSI podule. Code largely derived
...
from the pc532 "ncr" driver.
This gets me up to 300 KB/s from /dev/rsd0a on my A310. I think
bus_space_{read,write}_multi_1 and copy{in,out} are the bottlenecks now.
2001-05-28 22:54:10 +00:00
83da433ada
fix for UX96 (and all Yamaha specific devices, hopefully).
...
- fix how to get endpoint addresses.
- fix allocate count of pipes.
- add necessary null checks for asymmetry jacks.
2001-05-28 20:52:06 +00:00
5505749bb1
add new device; Yamaha UX96 USB MIDI I/F.
2001-05-28 18:28:04 +00:00
a62b5c1e2e
add a comment why IFF_PROMISC is handled separately for SIOCSIFFLAGS:
...
Handle special case for IFF_PROMISC. If only IFF_PROMISC
flag is changed, do not call an_init() to avoid initiating
reassociation to another access point. It is really
helpful for tcpdump(8).
2001-05-28 00:46:35 +00:00
ebf9e47c26
Add quirks for the Algorithmics P-5064 on-board 21143, and a way to
...
get the Ethernet address from it (they don't have an SROM).
XXX The latter should be replaced with devprops when they exist.
2001-05-27 21:00:33 +00:00
667dd41596
Remove ethernet CRC on received packets.
2001-05-27 19:36:06 +00:00
47745a094d
Add support for the Algorithmics ISA floppy controller.
2001-05-27 18:16:21 +00:00
ce289cc293
Handle non-contiguous BARs. Needed to be able to configure e.g.
...
IDE and USB on a PIIX3.
2001-05-27 17:50:40 +00:00
cbea766fd0
Add hcsc.
2001-05-26 23:02:06 +00:00
5cc459efcc
Quick hack of a driver for the HCCS 8-bit SCSI podule, based on the Oak driver.
...
Tested to the extent that it finds my disc.
2001-05-26 23:01:19 +00:00
ebf4596009
regen
2001-05-26 21:48:31 +00:00
eb6eb503f1
Fix typo in last commit.
2001-05-26 21:48:21 +00:00
7b0faa44c9
regen
2001-05-26 21:47:30 +00:00
d5ecc6c516
Add the 8-bit podules I got at Wakefield (except the A3000 Nexus,
...
which seems not to work).
2001-05-26 21:47:09 +00:00
41faed1386
Use cdev_decl() instead of local prototyping.
2001-05-26 21:24:38 +00:00
6d8a82ebc2
Use bus_space on arm26.
...
Update the comment to match list of bus_space-using ports.
Delete oak from list of drivers that need converting.
2001-05-26 20:55:48 +00:00
ab0637016a
Support NCR5380_USE_BUS_SPACE.
...
Add comments explaining the card a bit (and how badly we support it).
Add in-core RCSID.
2001-05-26 20:53:53 +00:00
bab53421c4
"oak" is now MI.
2001-05-26 17:50:30 +00:00
c7a388d937
Turn "oak" into an MI podulebus driver. Tested on my new A310.
2001-05-26 17:49:46 +00:00
f0ebb6c5a8
Add a comment about acemidi.
2001-05-26 17:47:45 +00:00
c9de53f96e
Create a kernel thread for Fibre Channel cards. This is the new
...
way of doing business- modulo some startup spasms and peculiarities
of the way kthreads are started (*after* configuration, weird) and
some strangeness with the freeze/thaw code, what now happens is
that any of Loop Down, LIP, Loop Reset or Port Datbase or Name
Server Database Changed ASYNC events cause the queues to freeze
for this channel. The arrival of a Loop UP is not relevant.
What *is* relevant is that the Port Datbase or Name Server Changed
async event indicate that it's okay to go and (re)evaluate the
state of the FC link and (re)probe local loop and fabric membership.
We have a kthread do this because it's *sooooo* much nicer to be
able to sleep while doing the 130-250 mailbox commands it'll take
to re-evaluate things.
When the state is well known again, we can unfreeze the channel
queues. Then, as commands start arriving, we simply can start them
or bounce them with XS_SELTIMEOUT (if the device in question has
gone away). Previously, we did lazy evaluation, which meant that
if a change occurred, we would wait until the very *next* command
to go rebuild stuff.
The reason this is not sensible is:
a) Even with sleeping, you can hang up your system because you might be
making some poor stat(2) call pay the price of re-evaluating the whole
fabric.
b) If we ever really want to get to dynamic attachment/detachment, we
should find out sooner, rather than later, where things get to.
Split off ispminphys_1020 from ispminphys- a 1020 has a 24 bit limit-
not anything newer.
Re-enable LIPs and Loop Resets as async events- this allows the outer
layer to set policy about them.
Roll platform major && minor. Remove bogus waitq (no longer used).
Remove callout entry in softc (no longer used). Define some shorthands
for channels. Clean up a variety of cruft left over from the
thorpej_scsipi changeover.
2001-05-25 21:45:55 +00:00
5b51f5ebe2
fix forgotten/malformed initialization of some variables.
...
(pointed out by Krister Walfridsson.)
2001-05-25 19:33:36 +00:00
339a9c8de2
Fix two typos in the BYTE_ORDER != LITTLE_ENDIAN case.
2001-05-25 08:54:40 +00:00
6229248ec0
minor style
2001-05-24 08:12:28 +00:00
85efd7edb1
correct multicast filter handling. without this, we cannot run IPv6 on an*.
2001-05-24 08:06:04 +00:00
9d59ae231c
adjust fas register fields names
2001-05-23 18:32:26 +00:00
a98b728b88
Call scsipi_channel_thaw() after scsipi_done() so that command ordering
...
is preserved.
2001-05-23 15:51:32 +00:00
72b4ba8aed
In scsipi_channel_thaw(), if the count drops to 0, call scsipi_run_queue().
2001-05-23 15:50:32 +00:00
fae4d6d720
fix typo in previous revision so that the scsi code compiles again.
2001-05-23 02:16:19 +00:00
24b32e8f08
Add missing definitions for hw checksumming.
2001-05-23 00:56:58 +00:00
d298a26243
Add back in (again) ISPASYNC_LIP and ISPASYNC_LOOP_RESET async
...
notifications. Let each platform set policy as to what to do
with these.
2001-05-22 19:32:41 +00:00
b9eb902304
Make SDRETRIES an option you can dig out of opt_scsi.h.
...
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
2001-05-22 18:59:57 +00:00
38f6ada8b6
Add SDRETRIES and SD_IO_TIMEOUT option for sd.
2001-05-22 18:58:15 +00:00
607b14bf7b
Add mii_bitbang attribute to gsip, pointed out by Andrew Gillham.
2001-05-22 16:58:23 +00:00
a888f6ef73
If the cache line size in the BHLC register is not configured,
...
then clear the MRL/MRM/MWI command-ok flags when attaching a
device.
2001-05-22 16:10:44 +00:00
79859fb138
Regen.
2001-05-22 16:07:56 +00:00
6e2bc5b352
Enable the PCI MWI command for memory writes on the i82558 and
...
higher.
2001-05-22 16:05:01 +00:00
b16ba1d8cd
Add i82562ET id.
2001-05-22 16:04:27 +00:00
188e0d6625
Some changes from the new FreeBSD `fxp' driver:
...
- Add some additional config block bits for the i82558/i82559.
- Change the config block template to only fill in the must-be-one
reserved bits, leave fxp_init() to fill in all the important things.
- On the i82558/i82559, we can use "Receive Long Frames" rather than
"Save Bad Frames" to support the VLAN MTU.
- Use 802.3x flow control on the i82558/i82559. This is all handled
transparently by the hardware. When in promiscuous mode, allow
wire-watchers to see the flow control frames.
- Use the Extended TxCB format on the i82558/i82559. This places two
Transmit Buffer Descriptors directly in the TxCB, which should cover
the vast majority of packets transmitted. This saves PCI transactions
that would otherwise be required to fetch the TBD list.
With the tansmit queue length changes from yesterday, this gets us up to
11.5MB/s TCP transmit speed, out of an absolute maximum of 12MB/s possible
on a 100Mb/s link.
2001-05-22 15:29:30 +00:00
2a604875d6
Remove one extra byte from scsipi_mode_select; pointed out by Juergen
...
Hannken-Illjes.
2001-05-22 15:14:24 +00:00
e25bf167a1
Regen.
2001-05-22 10:43:15 +00:00
f43e2c6ba1
Add Scanjet 4300.
2001-05-22 10:38:56 +00:00
a5a03e13dd
Report 82558, 82559, etc. based on chip revision. Also, remember which
...
revsion we have for feature enables later.
2001-05-22 01:23:25 +00:00
4af61a686a
oops. Make it compile.
2001-05-22 00:43:12 +00:00
b5805fa0c8
Sigh. Regen correctly.
2001-05-22 00:41:52 +00:00
611e112566
A little slight cleanup.
2001-05-22 00:27:01 +00:00
7a31dfa328
Supoprt the IOGEAR/ATEN UC-232A, which uses the Prolific 2303.
...
Make this the "PRODUCT_PL2303" because it's actually id 0x2303
and change the old PRODUCT_PL2303 to PRODUCT_RSAQ.
2001-05-22 00:18:03 +00:00
fb4607ec45
Add some additional register definitions, from FreeBSD.
2001-05-22 00:07:32 +00:00
0064d69faf
Re-arrange the transmit control data somewhat so that we can
...
use the extended TxCB format (that change will happen later).
2001-05-21 23:58:44 +00:00
92d92b1cb2
Correct an easy mistake in initializing gain registers.
...
This will fix the L-R imbalance.
Suggested by Ryo HAYASAKA <ryoh@jaist.ac.jp>.
2001-05-21 23:55:04 +00:00
65ac078927
Sigh, typo in last.
2001-05-21 23:21:27 +00:00
00f922fa70
Change NTXSEGS from 16 to 8, and the TXQUEUE len from 128 to 256. Also
...
increase the number of Rx buffers from 64 to 128.
These mirror some performance tweaks made to the sip(4) driver.
2001-05-21 22:20:31 +00:00
afdab0cab8
The ICH3 also has the Resume Bug.
2001-05-21 22:12:08 +00:00
a0f9e3c6fb
Regen; add ICH3 network controller IDs.
2001-05-21 22:11:31 +00:00
6b51adfbff
Add ICH3 network controller IDs.
2001-05-21 22:11:06 +00:00
d84e2452ea
Fix non-fatal typo -- CB_NOP -> CU_NOP in the ICH work-around (they
...
have the same value).
2001-05-21 21:49:51 +00:00
b4538a0165
The 82801BA built-in Ethernet has a bug which requires us to
...
issue a NOP before a CU_RESUME when in 10baseT mode. Handle
this.
2001-05-21 21:47:52 +00:00
e7a0ef6145
ANSI'ify.
2001-05-21 20:59:38 +00:00
ecb3a30463
add $NetBSD$
2001-05-21 20:47:13 +00:00
3462fe5d99
Remove reference to adapter_q in scsipi structure. Comment about the
...
usage of channel_q.
2001-05-21 15:50:46 +00:00
598241f757
add product COREGA FEther-PCC-TXF
...
kern/11357 and report from goro@venus.dti.ne.jp
2001-05-21 13:48:25 +00:00
fd7d5008e8
regen
2001-05-21 13:45:10 +00:00
4108bc4645
add product COREGA FEther PCC-TXF
2001-05-21 13:44:48 +00:00
2ed6d9dbf7
PR/12991: Dave Huang: DVD ioctls don't work because we send the wrong size
...
CDB (16 instead of 12).
2001-05-20 21:07:58 +00:00
86e12294cd
Add Multi-media/Ethernet card from Irlam.
2001-05-20 21:07:06 +00:00
65165c3deb
16-bit podules I acquired at Wakefield:
...
- Added SJ Research Nexus
- Note HCCS use same ID for IDE and SCSI cards
- Update Castle EtherSCSI entry
2001-05-20 20:40:19 +00:00
cb675810e0
add more comment about firmware of EVAL-CARD.
2001-05-20 13:14:54 +00:00
c13971f816
chenge chip and card identity,
...
print RF-chipset, Medium Access Controller(MAC) and CARD-identity
2001-05-20 12:57:57 +00:00
309a9b433c
delete RCS Id from pcmciadevs rev 1.128
2001-05-20 10:47:50 +00:00
3b35709de7
make compile again
...
(fix warning : missing white space after `#define....)
2001-05-20 09:54:47 +00:00
a2dd9d529f
regen
2001-05-20 09:16:14 +00:00
caed7fa236
add vendorID National Instruments
...
add productID PCMCIA-GPIB
2001-05-20 09:15:54 +00:00
281f1795a4
Add TI 1410 to yc_chipsets[].
2001-05-19 19:46:08 +00:00
3d863329cc
space/TAB cosmetics
2001-05-19 12:04:07 +00:00
5c9dc5b0d0
When abusing structs to describe on-wire (or in-hardware) data structures,
...
they need to be packed. (Without this, breaks on at least m68k.)
2001-05-18 21:11:43 +00:00
e4334b830d
Don't capitalize the word sync or async. It's inconsistient with other
...
messages.
2001-05-18 16:25:07 +00:00
d5338ae90e
Regen.
2001-05-18 15:35:49 +00:00
679f6a1a54
Add product IDs of internal devices found in NEC VRC4173 and vendor/product
...
ID of MediaQ MQ200.
2001-05-18 15:35:19 +00:00
8aa2f73d43
Enable tagged queuing again; should work now with scsipi_base rev 1.42
2001-05-18 12:57:42 +00:00
8b5bf22895
Workaround for broken drives (explained to me by Chris G. Demetriou):
...
some devices can't handle tag number larger than some values and always
reject commands with QUEUE FULL if the tag number is larger than this.
Under some circonstances the scsipi system may not decrease periph_openings
(as a workaround of other odd behavior) and we may end up requeuing the command
with a hight tag value again, and the driver could loop on this.
Workaround: in case of queue full, decrease periph_openings to
min(periph_active - 1, periph_openings - 1) so that, after some iteration,
periph_openings is less than the max tag value acceptable by the device.
Solves the problem with tagged queuing on ncr53c9x for me.
2001-05-18 12:56:28 +00:00
d76bcda838
Fixed some typos, removed unused asm() labels. Removed
...
the DMA map creation, now the bus glue does this.
2001-05-18 12:51:58 +00:00
3df4a7a4a8
do this console device lookup thing the right way this time
...
(This "dev" argument to the console functions is nonsense - nothing
should depend on it.)
2001-05-18 11:49:21 +00:00
4601552595
Regen
2001-05-18 06:14:40 +00:00
6f032f45b3
Support the Socket EA pcmcia ethernet (ne). It's ooooold.
2001-05-18 06:05:52 +00:00
f1f78293df
- Add some instrumentation which can be enabled by defining
...
SIP_EVENT_COUNTERS.
- Decrease SIP_NTXSEGS to 8 and increase SIP_TXQUEUELEN to 256.
This gives us 256 transmit jobs with only twice the descriptor
memory footprint. This prevents stalling transmissions due to
lack of transmit jobs under heavy load.
- Increase SIP_NRXDESC to 128 so we don't run out of receive descriptors
under extreme load.
- As recommended by the manual, leave one descriptor in the transmit ring
with OWN clear to prevent wrap-around.
- Even though the manual claims that driver software must initialize
TXDP if there are no pending transmissions when a new transmission
is to be initialized, doing so causes serious performance degredation
on the DP83820 under heavy load. Not initializing TXDP also increases
performance on the DP83815.
All of this gets us up to ~90Mb/s on both the DP83820 and DP83815 when
connected to a 100base network.
2001-05-18 04:38:30 +00:00
dbdf3820d8
Add a driver for the National Semiconductor DP83820 Gigabit Ethernet
...
chip. This is found on the NetGear GA-622 and Asante FriendlyNet
GigaNIX.
2001-05-18 02:03:53 +00:00
7ddcb8122d
SDEV_DB -> SCSIPI_DB
2001-05-17 20:02:56 +00:00
bc8eda57c9
increase the delay after PHY reset - it seems that mii register accesses
...
can fail if attempted too soon after reset
2001-05-17 19:00:18 +00:00
199e9f8164
regen
2001-05-17 17:39:30 +00:00
10aff2d3f0
argh - the OUI of PMC-Sierra is 00-e0-04, according to IEEE.
...
They managed to mess it up in a new way.
2001-05-17 17:39:00 +00:00
c1f451f54d
regen
2001-05-17 17:37:01 +00:00
2e9334d53e
add some stuff I got between my fingers
2001-05-17 17:36:30 +00:00
c1617a9b13
check PCI subsystem ID for a SMC9432BTX1 or SMC9432FTX and tell the common
...
driver about their media support (BNC and 100FX, respectively)
2001-05-17 17:35:13 +00:00
323adb5a41
support BNC interfaces (serial mode) as on the SMC9432BTX and 100FX
...
on the SMC9432FTX
2001-05-17 17:32:47 +00:00
1ea0cb1ea4
support the fiber output of the PHY device, enabled if the MIIF_HAVEFIBER
...
flag is passed in from the board driver
2001-05-17 17:29:54 +00:00
002851041c
re-enable mii_flags in attach args - I've found a use for it: tell the
...
PHY which support it that a fiber interface is present
2001-05-17 17:28:21 +00:00
0fcd8f3c7f
regen
2001-05-17 13:15:47 +00:00
8f8e3e808f
add products
...
Intel PRO/Wireless 2011 LAN PC Card
2001-05-17 13:14:19 +00:00
5e1115908d
Revert previous change; this breaks for the old controllers which 1.6
...
should help for. Instead, weaken the "echo" test: don't insist in
getting the same value back which was written.
2001-05-17 10:48:39 +00:00
d1bc67e029
In osiop_scsidone(), call scsipi_done() even for polled operations.
...
This fixes a `hang' on shutdown when the `Synchronise Cache' command
is sent to a disk. (It uses polled mode because it is called from inside
a shutdown hook).
2001-05-17 10:35:30 +00:00
c2b5ec5220
Add a few nits. Hubs seem problematic on resets sometimes.
...
Also, make sure fwohci can detach cleanly (for cardbus).
2001-05-17 05:30:37 +00:00
bcc2ce4f8c
give sunkbd and sunms a "poll" routine.
2001-05-17 02:24:00 +00:00
90cabee3fb
Per helpful suggestion from LukeM- make INLINE usage consistent (and
...
use correct __inline format).
2001-05-16 21:41:52 +00:00
8e532c1ad1
Make sure to allocate big enough mbuf data area before elevating
...
interrupt priority, to avoid allocating additional mbufs on
splsched(). Move some other misc bits out of splched()-guarded
section. This should make the code a bit more friendly wrt e.g.
clock interrupts. Sligh performance improvement was observed with
this change (like 1-2% on slow machine), even.
This also fixes ancient kern/2478 by Bill Sommerfeld.
2001-05-16 20:30:52 +00:00
8a78799bf4
support BUFFALO AirStation WLI-PCM-S11
...
this card are PRISM2.5 card.
2001-05-16 14:33:21 +00:00
c6da2452c0
Put back /usr/include/dev/tc/sticreg.h.
2001-05-16 13:48:52 +00:00
25221c413e
regen
2001-05-16 12:57:55 +00:00
4c575cc65b
add product
...
BUFFALO AirStation 11Mbps WLAN Card
2001-05-16 12:57:27 +00:00
eef5fa50d3
Big-endian support.
2001-05-16 10:45:36 +00:00
15833cae3b
add prism chip identity, Prism2 with SST flush.
2001-05-16 07:53:28 +00:00
ff47810d07
fix previous delint
2001-05-16 06:29:01 +00:00
c15945130c
delint: remove unnecessary assignment to same objection (hidden in #define)
2001-05-16 04:50:11 +00:00
be493349d2
delint: zero sized array initalisation is a gccism
2001-05-16 04:39:03 +00:00
927097774a
delint: remove volatile from fxp_mdi_read() decl
2001-05-16 04:20:55 +00:00
b81e69fa8e
beginning basic 2300 infrstructure support
2001-05-16 03:58:34 +00:00
9f2c2c7a8c
Keep up with the Joneses.... further synchronization for the eventual
...
implementation in NetBSD for target mode.
2001-05-16 03:58:03 +00:00
73eba1a839
Long overdue- put locks on the usage of the mailbox command stuff. This
...
keeps us from stomping on ourselves.
Say we're in the middle of re-evaluating a loop (and sleeping) when a
command completes, or a timer refires, and this *other* thread decides
*it* wants to start re-evaluating the loop. Bad news.
We have to be a bit careful- if we can't acquire the MBOX semaphore at
interrupt level, we will simulate a host interface error. This is a bit
of a temp workaround. There's some work underway driven by a NetBSD
commercial user that will try and force most mailbox stuff into a
part A/part B interrupt driven model.
2001-05-16 03:55:15 +00:00
a1dd9d78ee
It's 'role None', not 'role No'.
...
Also, pay attention to the difference in the ISPASYNC_CHANGE_NOTIFY
between loop and fabric changes.
2001-05-16 03:52:10 +00:00
9a3074ffce
cosmetic change.
...
change version format: <major>.<minor> variant <num>
2001-05-16 02:36:37 +00:00
91d9961f24
Regen
2001-05-15 23:18:16 +00:00
75d77bf185
Add OUI for PMC-Sierra. Add BCM5221 Phy. Add PM8351 Phy.
2001-05-15 23:17:48 +00:00
f5d9baae2f
Note that extended status is in register 15
2001-05-15 23:16:40 +00:00
6ae38c2f7a
Try the kbc_auxtest if the random write/read to the aux port fails (it returns
...
0xfe on my gateway 2000 circa 1993). That should not affect broken controllers
that choke on the kbc_auxtest, because for those the write/read test succeeds.
2001-05-15 22:01:07 +00:00
c2ffdccb2b
Regen; Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:33 +00:00
8fd542b023
Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:04 +00:00
d62b92e0f7
delint: () protect some macro args
2001-05-15 15:41:27 +00:00
889762fbcf
delint: need ; between case label and }
2001-05-15 15:25:04 +00:00
e3134697e1
delint: remove comments from macro args; confuses cpp/lint
2001-05-15 15:06:23 +00:00
09ba301f07
delint: () protect some macro args
2001-05-15 15:00:04 +00:00
9bef152bd7
delint: need ; between case label and }
2001-05-15 14:57:49 +00:00
0b6a1eb95a
delint: () protect some macro args
2001-05-15 14:37:36 +00:00
d3e16de232
delint: need ; between goto label and }
2001-05-15 14:30:24 +00:00
b6b83e2ec3
delint; use MAX(sizeof(..),sizeof(..)) instead of max(...) for array size
2001-05-15 14:03:27 +00:00
13a9902fc6
delint: can't have an empty case item at the end of a switch; need a ; at least
2001-05-15 13:53:20 +00:00
ae0203ee27
Correct arguments to bus_dmamap_create(), and add a reset routine for the v3
...
interface.
2001-05-15 12:49:37 +00:00
0071e88a8c
fixed mistake.
...
major version and minor version were made reverse.
2001-05-15 11:45:50 +00:00
08d33f4cc0
Fix indentation in recent commit.
2001-05-15 09:06:15 +00:00
4afb07bd12
getting prism2 firm ver routine to wi_get_id().
...
if firm ver is more than 0.8c3, promiscuous mode is off.
typo WI_RID_STA_IDENEITY -> WI_RID_STA_IDENTITY
2001-05-15 09:01:27 +00:00
0aae41bf84
Clean up comment about unregistering callbacks
2001-05-15 06:54:07 +00:00
c3967bca55
Various small changes.
...
Clean up one bug in a DPRINTF in arrs_input which could panic on some packets.
Gut the ack/response functionality and clean it up so all packets get checked
correctly and the abuf struct isn't used once the ab_cb has happened (there
still could be ack packets waiting to be processed at that time).
Finally, add some documentation explaining read/write/inreg and their
purpose/argument calling.
2001-05-15 06:52:30 +00:00
d91da495a9
Back out last change until I get fwohci rototilled better for checking the ack bits. Makes things compile again.
2001-05-15 06:30:30 +00:00
caa399b739
WEP cannot be used when Prism2 Firm version is lower than 0.8.3.
...
Although WEP is used in Windows also in an old firm,
because WEP is processed by the windows driver side.
If Prism2 Firm version is more than 0.8.3, WEP does work without 'Promiscuous ON'.
2001-05-15 04:27:22 +00:00
4d4231d0e9
Add support for "Corega FEther CB-TXD".
...
kern/12709: from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:26:23 +00:00
b003ab3d9c
Regen.
2001-05-15 04:25:12 +00:00
0f5babc5cb
Add product "Corega FEther CB-TXD". Modified from kern/12709.
...
from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:24:28 +00:00
2970b99ac9
It enabled it to control roaming mode and authentication mode.
...
Roaming mode can change value into 'firm mode' and disable.
Authentication mode can change into 'Open System authentication'
and 'Shared Key Authentication' with Prism2 chip.
wi_get_id() was introduced in order that chip might judge automatically
whether it is Prism2 chip. Therefore, a pp_prism2 entry in
"struct wi_pcmcia_product" became unnecessary.
2001-05-15 04:14:06 +00:00
38c798fe9f
Encapsulate name declarations in macros in preparation for adding
...
conditionally-compiled code for the DP83820.
2001-05-15 03:06:21 +00:00
edfd12a9b1
Define the register/descriptor differences between the DP83815 and the
...
DP83820. The DP83820 definitions are wrapped in #ifdef DP83820, since
there are enough differences that a single binary object would not be
able to efficiently drive both the DP83815 and DP83820.
2001-05-15 02:19:05 +00:00
bdb6ea6ecc
Regen; added DP83820 Gigabit Ethernet chip.
2001-05-14 22:37:24 +00:00
285931ff50
Add product ID for the National Semiconductor DP83820 Gigabit Ethernet
...
chip.
2001-05-14 22:36:06 +00:00
2573405952
Add latent vendor entries for ServerWorks and Winbond IDE controllers.
...
No code to use them as yet.
2001-05-14 20:41:27 +00:00
bc980d7eba
Use SCSI/ATAPI common definition for MODE_{SELECT,SENSE}{,_BIG}. Define
...
functions to send theses commands in scsipi_base.c and use them instead
of ad-hoc commands setups.
2001-05-14 20:35:27 +00:00
85c02ac331
epintr(): eliminate write-only variable 'addrandom'
2001-05-14 09:28:49 +00:00
6ff7de5716
remove unneeded #includes, fix typo
2001-05-14 08:01:23 +00:00
1f7c685ce3
remove //-commented debugging stuff
2001-05-14 07:35:33 +00:00
497bb809df
do not use the synchronous read mode for MCA 3c529
2001-05-14 07:03:50 +00:00
61ca5f641b
Remove ackcb. It's a duplicate of existing functionality.
2001-05-14 06:51:36 +00:00
98139fa8b9
Make sure and zero out the malloc'd abufs before using them.
2001-05-14 05:46:41 +00:00
7f2de75450
Corega FEther PCC-TXD works fine.
2001-05-14 01:44:42 +00:00
9a107674e5
regen
2001-05-14 01:43:42 +00:00
70f4199532
add product Corega FEther PCC-TXD
2001-05-14 01:41:16 +00:00
2cd8833615
Change the comment about sucky performance to recommendation to remove
...
DIAGNOSTIC/DEBUG from the kernel. This helped to boost the performance
on my test machine from ~5KB/s to like 800KB/s for ftp test, and
to like 700KB/s for netio test. I wouldn't have imagined the options
are THAT costly ....
2001-05-13 20:43:04 +00:00
9654c235a7
Note TS11 (ts).
2001-05-13 15:34:25 +00:00
59b29023fd
Update the TS11 driver to useable state.
...
Thanks to Michael Kukat for providing a machine to test this driver.
2001-05-13 15:32:40 +00:00
f66126b9f0
Moved from sys/arch/vax/uba/.
2001-05-13 15:30:10 +00:00
637bffc245
Add bus type to softc.
2001-05-13 15:23:37 +00:00
3790f44eac
Add a retries counter to abuf
2001-05-13 05:02:08 +00:00
880b3e6a6f
Add locators support
2001-05-13 05:01:42 +00:00
a3263e073a
Turn off PCMCIADEBUG by default. This should get set with options in a config file
2001-05-13 04:24:51 +00:00
95cc3bf342
Turn off PCMCIACISDEBUG by default. This should get set with options in a config file
2001-05-13 04:24:28 +00:00
6cf92c7dba
Turn off PCMCIADEBUG by default. This should get set with options in a config file
2001-05-13 04:23:46 +00:00
6f62797262
Don't leak memory in case of a realloc failure.
...
Reported by: grendel@heorot.stanford.edu (Ted U)
2001-05-12 19:18:57 +00:00
bfd7dcb931
Add first pass generic ack callback code (to eventually replace mbuf specific code).
...
Change ab_node's to ab_req.
Fix a bug where setting BIBValid on OHCI 1.0 chips (this is a reserved bit
on 1.0)
2001-05-11 06:10:44 +00:00
29499573cd
Change ab_node's to ab_req.
...
Use read/write instead of input/output.
Fix a bug in attach where the abuf wasn't getting zero'd out.
2001-05-11 06:09:01 +00:00
5bf1559a64
Rename input/output to read/write to match ieee1394var.h
2001-05-11 06:07:40 +00:00
2d235c864f
Add some notes
2001-05-11 06:07:02 +00:00
b4974f0526
Add first pass of generalized hooks for packet completion (i.e. ack) codes. This will eventually replace the mbuf code when it moves back to if_fw.c where it belongs.
2001-05-11 06:06:03 +00:00
6dc32302f3
Add mask for getting the ACK bits out of the status area of a DMA context descriptor
2001-05-11 06:04:49 +00:00
b7d6b60f87
Change abuf to include both requestor and responder softc's (for dealing with requests from other nodes later).
...
Add a callback so the ACK bits can be looked at if wanted.
Change the input/output pointers to proper proto's and rename to read/write.
2001-05-11 06:03:55 +00:00
32a67a12cd
Remove extraneous prototype
2001-05-11 06:00:17 +00:00
0f8a2c610f
Add MI cprofb (used on shark and netwinder)
2001-05-11 04:47:55 +00:00
240de9a426
Definitions for the Dallas Semiconductor DS1286/DS1386 Real Time Clock.
...
From Rafal K. Boni.
2001-05-11 02:07:09 +00:00
18e25d5feb
Add a flag to suppress SCC reset at attach time.
...
From Rafal K. Boni.
2001-05-11 01:40:48 +00:00
ba2882488a
Despite what the hardware docs say, the global reset command is not
...
done when the command-in-progress bit has been cleared. The 1ms
time that is mentioned also seems wrong; 20,000us is not enough
on at least one machine. So, do a delay(100000) in ex_reset.
Fortunately, this function is only called when the card is
attached or when hardware failure is suspected.
While here, only mask one 1 bit in the 'reset hack' case.
2001-05-10 22:57:44 +00:00
8aad07ad6a
Add missing printf().
2001-05-10 09:41:19 +00:00
59f85c4e3e
Ansify a function I forgot last time.
2001-05-09 19:33:07 +00:00
6300e455b4
Make sure `bhlc' is initialzed before we consult it to determine
...
the number of functions on the card.
2001-05-09 18:16:39 +00:00
330ab2b636
Print a clock frequency of the chip.
2001-05-09 16:24:43 +00:00
94b7017e7f
Point out where the documentation is wrong.
2001-05-09 12:08:44 +00:00
f82cb49523
Add FireWire OHCI controller on Cardbus.
2001-05-09 12:07:40 +00:00
7ac3b0b5a9
Ansify.
2001-05-09 12:07:01 +00:00
c37a0f8fb8
Fix grammaer in error message.
2001-05-09 12:06:25 +00:00
ecdf760718
fix locking problem of event queue access.
2001-05-08 17:23:09 +00:00
09858f6fc8
change promisc mode in case of SIOCSIFFLAGS of wi_ioctl.
...
Fix indentation.
2001-05-08 16:42:49 +00:00
dbb7276f40
fix RCS Id.
2001-05-08 14:46:06 +00:00
1480c8fae2
delay(10) is too much enough for command waiting routine.
2001-05-08 13:42:04 +00:00
a9bf1b0410
delint
2001-05-07 08:15:41 +00:00
3db21b039c
We map in by MLX_EISA_SLOT_OFFSET, so remember that when accessing the
...
IOCONF registers. Pointed out by thorpej.
2001-05-06 20:34:41 +00:00
8311862915
Add amd766 support. Rename some variables to 7x6 now that it supports
...
both 756 and 766.
2001-05-06 20:06:35 +00:00
ae9cc4fa8a
Add an (untested) EISA front-end for the `mlx' driver.
2001-05-06 19:54:59 +00:00
95450fbced
Make provision for resetting the board at start-up.
2001-05-06 19:53:04 +00:00
d4d6497c45
Regen.
2001-05-06 19:44:14 +00:00
0c528fcfc0
Add some Mylex products.
2001-05-06 19:43:54 +00:00
06fc2f85cc
Since __HAVE_OLD_DISKLABEL, DISKMINOR(u, p) isn't continuous over "p"
...
anymore. So we can't pass a range to vdevgone() but have to loop over the
partitions explicitely.
(otherwise the next device unit will be killed)
2001-05-06 18:30:56 +00:00
fda35ea62c
Add dmc.
2001-05-06 17:38:36 +00:00
816247df06
Add il, dmc, ts and if_uba.
2001-05-06 17:37:52 +00:00
09a79adad2
Driver for the DMC-11/DMR-11 DDCMP interface, (untested) from 4.4BSD.
2001-05-06 17:36:04 +00:00
9fce66b9a0
Regen.
2001-05-06 16:10:45 +00:00
6e51539959
Add some IDs for the AMD760 chipset, as specified in the datasheet.
2001-05-06 16:09:38 +00:00
bb0a481471
Add il + ifuba.
2001-05-06 15:32:47 +00:00
7026635893
Driver for the Interlan NI1010 Ethernet Controller, from 4.4BSD.
2001-05-06 15:30:46 +00:00
93011fb5f6
Use if_uba + ether_ioctl routines. Removed ~150 lines of duplicated code.
2001-05-06 15:27:48 +00:00
9b9db3a6bd
Back from the dead, but now changed to use the bus_dma interface.
...
Still to do:
- ubaresets
- BDP handling
2001-05-06 15:21:44 +00:00
9bf58a757b
Add missing break statement.
2001-05-06 14:32:35 +00:00
54d9a46bbc
Vrc4172 GPIO support. This device is currently configured on PenCentra 130.
2001-05-06 14:25:15 +00:00
3446a61cb3
Fix a typo from thorpej_scsipi merge. No-sense information with retval == 0
...
should only print if SCSIPI_DEBUG is defined.
2001-05-06 11:31:08 +00:00
8bb5cfe6aa
divided into PCMCIA attachment and common code of wi.
...
since if_wi_ieee.h does not depend for pcmcia,
sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .
2001-05-06 03:26:38 +00:00
bef8b534cc
Now that we can do it, print "HPT366" or "HPT370" depending on PCI revision.
2001-05-04 18:38:36 +00:00
7e9f9eaaa1
Better support for VIA chipsets: look at the product/rev ID of the ISA bridge
...
to guess the pciide capabilities, rather than trying to guess it by ourselve.
Add preliminary support for the 686b (Ultra/100) guessed from FreeBSD/linux
driver (datasheet not publically available, I contacted via).
Let chip-specific map routine do the autoconf printf if ide_name is NULL
(they may have more details about the controller than we have in pciide_attach)
2001-05-04 15:25:05 +00:00
956a71c1c5
Add pci bus number to pci_attach_args, as suggested by Jason on tech-kern
...
(needed for pciide)
2001-05-04 15:13:17 +00:00
5b3932d176
Implement polled command mode, and use it for writing system dump
...
and for initial autoconf probes; the latter eliminates need for
deferred configuration (and makes dmesg a bit nicer).
g/c EDF_IODONE flag - protect against interrupt by calling tsleep()
at splbio in worker thread
g/c unneeded stuff, improve some autoconf messages
2001-05-04 12:58:34 +00:00
27155d9a6d
Add an ATAPI front-end to the st driver. Completely untested for now,
...
but st at scsi should still work :)
2001-05-04 07:48:56 +00:00
e3f2f91bfb
Split pci and eisa/isa attachment calls, plus misc cleanup.
2001-05-03 20:34:54 +00:00
487447a9bf
Bump values of the number of up- and downlaod descriptors such that
...
saturating a 100Mbit link will not lead to running out of them.
2001-05-03 17:59:24 +00:00
dcd7e604ed
Make weasel watchdog timer work reliably with help from <thorpej@zembu.com>
...
Remaining issues to deal with:
- recognize when watchdog timer is deactivated on the Weasel.
- deactivate weasel watchdog timer if we pop into ddb.
2001-05-03 17:55:47 +00:00
c58375dd6a
Well, 16us is certainly more than 500 nanoseconds, but 1us is too, right?
...
This change improves elmc performance to ~350KB/s on my 386DX,
which is better than even WD8003.
2001-05-03 11:17:36 +00:00
893ab0ad39
export dec_boot.h
2001-05-03 05:26:08 +00:00
f29b37329e
Change to DPRINTF/DPRINTFN for debug output.
2001-05-03 04:42:11 +00:00
3aa56ffc5a
Retabify to correct style. Also, change to using DPRINTF interface for debug output.
2001-05-03 04:41:34 +00:00
4e54f2d907
Style police. Got the tab'ing correct
2001-05-03 04:37:43 +00:00
58b62ea0cf
Correct playing mu-law and linear.
2001-05-03 02:09:11 +00:00
ff3917c60f
Oops, it contained some debug code.
2001-05-02 13:34:33 +00:00
63a7c0b5ad
Add IBM SCSI Adapter support to the list - this is the last thing
...
I'm aware Linux MCA supports and NetBSD not
2001-05-02 13:32:21 +00:00
63958eee01
One item off TODO list - we check for MCA bus presence via bios call
2001-05-02 13:20:31 +00:00
af80ef9d9a
Add vs for x68k.
2001-05-02 13:01:19 +00:00
1a9388aa50
Software codec for Oki MSM6258 voice synthesizer.
...
Recording untested.
2001-05-02 12:53:31 +00:00
399af9e4a8
X68k built-in voice synthesizer supports 4bit ADPCM.
2001-05-02 12:49:41 +00:00
90b27e80b9
Redo attachement of scsi/atapibus, so that atapibus at umass works again
2001-05-02 11:24:01 +00:00
2963ff5c58
Add `l_poll' to `struct linesw' and provide an xxxpoll() entry point
...
in each tty driver to indirect through it.
This allows tty line-disciplines to handle poll(2) system calls.
2001-05-02 10:32:08 +00:00
6baecd7e87
Don't forget to init chan_bustype.
2001-05-02 10:31:41 +00:00
28d47d8db3
Use same type for first field of struct ata_atapi_attach and struct
...
scsipi_channel, so umass has better chances of working on big-endian systems.
2001-05-02 09:47:45 +00:00
796f5b43a7
delint
2001-05-01 16:40:03 +00:00
4dbb3cf591
Add a few more items
2001-05-01 13:57:41 +00:00
43800774d5
Add hpcarm devices (sacc, sacom, sacpcic, saip, saost).
2001-05-01 12:44:40 +00:00
37ed68b3e4
Avoid null pointer dereference.
2001-05-01 06:17:23 +00:00
d483a2c9e2
Fix whitespace usage (fow now, previously existing code only just due to
...
my time shortage):
- Use 8 column for basic indent.
- Use 4 space for 2nd level indent.
- Use tab instead of 8 spaces.
- Don't put space before function call operator. That's unary operator.
- Wrap lines so that it fits in 80 columns.
2001-05-01 06:15:42 +00:00
5044375656
Wrap some variable definitions with #ifdef FW_DEBUG that only apply in debug mode.
2001-05-01 05:17:40 +00:00
f58c020bfc
Remove some one-off debug printf's
2001-05-01 05:17:08 +00:00
9625a01e94
Change to IPL_BIO
2001-05-01 05:10:30 +00:00
af20295c95
Extend ieee1394_abuf to include read/write operations cleanly.
...
Add ieee1394_attach_args
Add sc1394_configrom_len
Add list links for nodelists from parent bus.
2001-05-01 04:48:11 +00:00
370ee1f0f0
Add a 64bit version of CSR_BASE
2001-05-01 04:48:10 +00:00
59c9536fe4
Add proc struct for kthread, interrupt handler flags, and nodelist
2001-05-01 04:48:10 +00:00
06dd6e0f40
Extensive changes from fwnode integration
...
Move interrupt routine to simply updating state flags and ack'ing interrupts
Move main processing into kthread
Change IPL level to IPL_BIO and try not to hold splbio very much if at all.
Add baseline support for attaching/detaching/updating fwnode's.
Start adding higher level API which isn't tied to if_fw/mbuf's
2001-05-01 04:48:10 +00:00
b44a25d8d6
Initial checkin for fwnode code. Needs extensive cleanup
2001-05-01 04:48:10 +00:00
cd6ceaf2cd
Put in the structure for fwnode/fwscsi
2001-05-01 04:48:10 +00:00
59bde215a7
Initial checkin for fwnode support
2001-05-01 04:46:23 +00:00
46ebed2ee8
Initial checkin for fwnode support
2001-05-01 04:19:20 +00:00
b2230effa3
Doesn't need fwohci include's. Change struct device to ieee1394_softc.
2001-05-01 04:18:29 +00:00
a8304325bf
Fix 'busname' to attach nodes correctly.
2001-05-01 00:25:16 +00:00
d3a64bd0d8
Add code to recognize and set media on GMII (Gigabit MII) PHYs.
...
802.3 doens't specify ANAR or ANLPAR bits for GMII. Need to
use PHY-specific registers for this, for now, which means we
need specific drivers for the Gigabit-capable PHYs (I think the
most common is the BCM5400).
2001-04-30 19:49:08 +00:00
63604adafa
Add a bunch of Gig-E definitions.
2001-04-30 19:21:03 +00:00
19b0c05827
Ops, don't forget to increment li->used for each tagged command.
2001-04-30 13:58:32 +00:00
2cc0fbbe14
remplace /*
...
*/
with
#ifdef notdef
#endif
to avoid:
../../../../dev/ic/hmereg.h:275: warning: `/*' within comment
2001-04-30 12:22:42 +00:00
26b0905dd0
Machine independent GPIO interface.
2001-04-30 11:42:17 +00:00
4ca3c858b6
Copy of sys/arch/hpcmips/vr/button_vrgiu.c.
2001-04-30 10:10:18 +00:00
jdolecek