2ceebb6c0e
Remove unnecessary test of tp->t_linesw against NULL; they are results
...
of confusion while correcting compilation error after t_line is
replaced with t_linesw.
2001-03-31 00:35:21 +00:00
6b982beac1
Call softintr_init()
2001-03-31 00:10:03 +00:00
3e4cc841a7
Add softintr and ISA bus support
2001-03-31 00:08:34 +00:00
a03b2aaaf0
Reverse previous commit - isa headers don't belong in /usr/include
2001-03-31 00:05:57 +00:00
d3a8b4016e
Add isa_machdep.h and isapnp_machdep.h
2001-03-30 23:59:19 +00:00
0ca4ab64ac
Add ISA serial port device
2001-03-30 23:54:45 +00:00
9641e5d860
Probe ISA bus devices
2001-03-30 23:52:05 +00:00
dd068f675e
Changes to interrupt architecture for softintr support
2001-03-30 23:51:14 +00:00
cdba0ef41c
Add some ISA bus cards
2001-03-30 23:49:37 +00:00
7cf783665e
Please preserve copyright notices modified by Ben Harris since the a.out and
...
ELF structure loadings are of his design from BBBB
2001-03-30 23:49:06 +00:00
1b6e2e02dd
Add files for ISA bus and softintr support
2001-03-30 23:47:58 +00:00
8cd59636b4
Support for ISA expansion slot in Mips 3230
...
The ISA Bus on this machine doesn't support DMA, and all interrupt lines
are wire-OR'ed together. Mileage may vary if sharing interrupts.
Tested cards:
com: 8250 and 16550 UART's (8 bit)
ec: 3com Etherlink II (8 bit)
we: SMC 8013 Ethernet (16 bit) [work in progress]
Probes, ARP in both directions works, sends clean packets,
tcpdump show correct packets on receive, NDP for IPv6 works,
netstat -s shows nothing strange.. but doesn't talk TCP/IP!
2001-03-30 23:45:18 +00:00
7d798b3ef7
Initial ELF kernel loading for RiscPC/A7000/NC based on Ben Harris's work
...
Since arm32 isnt switched to ELF yet its not completely tested; It loads
a kernel but then hangs on symbol table loading; propably a ELF/a.out
symbol table conflict.
Also cleaned up the code a bit
2001-03-30 23:44:58 +00:00
154a3bba69
use MI softintr
2001-03-30 23:28:00 +00:00
5d03735614
Move most interrupt functionality to arch/mipsco/mipsco/interrupt.c
...
Remove old style soft interrupts to favor MI softintr support
2001-03-30 23:26:29 +00:00
09d79c4b1f
New data structures and prototypes for MI softintr support
2001-03-30 23:23:37 +00:00
273d283d25
Implement MI softintr functions (softintr_establish, softintr_schedule etc)
2001-03-30 23:21:30 +00:00
9477a9256c
Re-implement bus_space(9) functions:
...
- Correctly handle striding of data
- Better support for endian neutral access
- Correctly implement _stream variants of bus_space functions that can
byte swap. This reverses the automatic byte swapping done in hardware
for 16 bit ISA bus cards
2001-03-30 23:17:03 +00:00
a22b0cbf4d
Optimize bswap16() and bswap32() functions to inline assembly.
2001-03-30 20:00:05 +00:00
7cd0069dfc
Make this compile without com.
2001-03-30 16:32:02 +00:00
c5496871db
fix comment.
2001-03-30 15:59:17 +00:00
a9a5dcd043
Add yds at pci and children.
...
Alpha and i386 are the only tested ports.
2001-03-30 14:47:48 +00:00
355086c412
The `speed' statistic from the RNG was brought to you by the letter `B' and
...
the letter `S'. I don't think anyone will miss it.
2001-03-30 12:05:02 +00:00
a6a587a71e
Track prototype change to isa_fillw() that avoids passing u_short as an arg.
2001-03-30 11:21:33 +00:00
5ba1d71d33
Don't reference nonexistent register on R96. (and maybe R94 too)
2001-03-30 09:10:48 +00:00
70a7bcb64b
Remove ncr53c9x_dmaselect
2001-03-30 07:49:07 +00:00
cce60f68dc
Added.
2001-03-29 21:07:56 +00:00
d6b50e1598
add fas configuration
2001-03-29 18:54:58 +00:00
6386dedebe
When attached, do not change brightness if the value is zero.
2001-03-29 17:44:50 +00:00
cc5ddb2b20
Make `trace' useful even w/o symbols and add /f option to dump parameters.
2001-03-29 14:58:08 +00:00
fb96b4d88c
Added.
2001-03-29 04:58:52 +00:00
22a64b5a3e
Added.
2001-03-29 04:35:09 +00:00
fbd8636feb
Added.
2001-03-29 04:16:21 +00:00
da500dc6be
Removed some sun3 references.
2001-03-29 04:07:54 +00:00
1c9cc1b092
use NCR_F_DMASELECT instead of ncr53c9x_dmaselect
2001-03-29 03:30:19 +00:00
6095b6e2ff
Added.
2001-03-29 03:24:19 +00:00
0640ad6ace
When the endians are little, they are little.
2001-03-29 03:23:33 +00:00
3eb7866aaa
Added support for the 68010 bus error frame.
2001-03-28 23:08:15 +00:00
a8c0b619da
support umct USB-serial device
2001-03-28 18:45:07 +00:00
676bacb4ea
include "opt_ddb.h" explicitely
2001-03-28 18:03:49 +00:00
7f28cbe9dc
Fix an obvious typo.
2001-03-28 17:33:07 +00:00
fdce371144
objcopy -> ${OBJCOPY}
2001-03-28 17:04:44 +00:00
864a597f2d
Define ${OBJCOPY}.
...
XXX: Should we use ${CROSSDIR} here or not?
2001-03-28 17:03:48 +00:00
2deceb396c
Brought up-to-date with revision 1.124 of the Sun3 pmap.
2001-03-28 14:15:11 +00:00
a8cd6c5401
Added.
2001-03-28 13:47:58 +00:00
5677634e50
Small comment correction.
2001-03-28 13:04:57 +00:00
221f247a25
Add some missing functionality.
...
- wait READY signal in enable function
- use tsleep for large delays
- implement disable function
2001-03-27 18:06:39 +00:00
b6aa1dfc2b
Compile vsbus_dma.c if vax53, hinted by Michael Kukat.
2001-03-27 18:01:59 +00:00
e84bc939c9
On alternate Tuesdays, SRM uses a different method of identifying
...
PCI interrupts routed to the ISA ICU.
2001-03-27 01:39:51 +00:00
a97039b0ae
pmap_release(), pmap_pinit() and the `pm_regstore' field are obsolete.
2001-03-26 23:18:51 +00:00
4de5b658ad
Use a pool cache for pmap allocation. The cached pmap structures include
...
a ready-to-use level 1 page table (on sun4m) and MMU context.
A simple `fork()' test shows an improvement in spent system time of
around 4 percent (which is just a bit disappointing, IMO, but it's
an improvement nonetheless).
2001-03-26 23:12:03 +00:00
104bada017
Missing KERNEL_PROC_LOCK() in the WIN_OF trap code.
2001-03-26 21:58:34 +00:00
10e66b85b1
Ensure that my last change compiles with warnings enabled.
2001-03-26 19:56:32 +00:00
2ff606560c
Do not save/restore the kernel SR since we are no longer trying to copy
...
it in pmap_activate(). Pointed out by ws in a private message.
2001-03-26 18:52:29 +00:00
ded6fe39cd
bump version to 1.9: ELF and MI loadfile().
2001-03-26 15:36:48 +00:00
20ba07f2fe
- add dev_noimpl(xxx,yyy) macro to replace "(dev_type_xxx((*))) yyy",
...
and use appropriately
- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well
- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)
- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev
- ensure that the comments are accurate WRT the behaviour of a given entry
2001-03-26 12:33:22 +00:00
7e28d29b32
- MI loadfile() returns a file descriptor, not errno.
...
(error is printed in MI loadfile() anyway)
- Make sure to try to load all default kernel names,
including netbsd.sun3[x].
Now sun3 ELF based miniroot works properly on my 3/80.
2001-03-26 11:54:50 +00:00
09bedcf84f
Add GENERIC_TINY config for low memory (and slow) machines.
2001-03-26 10:25:34 +00:00
6c5da9bd76
o Change initialization for config_hook() base lcd control.
...
o Fix backlight control in case that light is controlable but not be
able to get status.
o change some verbose prints.
2001-03-26 09:40:45 +00:00
887d70ab8f
CONFIG_HOOK_GET support for get current port status.
2001-03-26 08:57:02 +00:00
903b8688da
The interface to `setdisplay' was implemented wrong. The utility stated the number
...
of bits per pixel instead of the log2_bpp as assumed (since the rest uses this).
2001-03-25 21:25:35 +00:00
113c9ed888
recompile.
2001-03-25 17:16:33 +00:00
e78f561e10
speed up physical address detect routine. (MemoryManager_VirtualCopy)
2001-03-25 17:14:53 +00:00
24beb5ffb9
support 'reverse video' option.
2001-03-25 17:14:04 +00:00
c31816f70c
selectable serial console speed.
2001-03-25 17:13:15 +00:00
0e72b76163
Missing changes to the last update, making this compile (and work) again.
2001-03-25 16:14:00 +00:00
ed26af9e66
recognize hpcboot.exe's ELF symbol table.
2001-03-25 15:15:18 +00:00
44e4c53338
Add MQ200_USECRT option, which enables CRT output on MC/R530.
...
This is kernel configuration option and you can't enable and disable CRT
dynamically for now.
2001-03-25 13:06:52 +00:00
bea77d06a2
Add #ifndef _HPC_PLATID_H_.
2001-03-25 12:17:35 +00:00
b53fce84d3
Add an autoconfig node for PCI-MCA bridges. Configures MCA bridges
...
via callback. This beast is very rare, present only on some IBM PCs.
Code was copied off pceb.
2001-03-25 09:54:10 +00:00
5b36d84a9c
Don't panic until DEFCON 1.
2001-03-25 06:38:50 +00:00
a45ca84ab5
Verbose display of machine check errors on AS200/400 boxes.
2001-03-25 05:52:38 +00:00
8edd158910
MI(ish) EtherB driver using the MI SEEQ 8005 driver. Very lightly tested.
2001-03-25 01:09:36 +00:00
cbe4d910da
It might be useful if I actually filled in the interrupt handle for
...
podulebus_irq_establish() to use.
2001-03-25 00:56:58 +00:00
f283c0a504
Use ${THISSH3} instead of ../.. ; not everyone builds in ../compile/FOO
2001-03-24 18:26:11 +00:00
c5956b89f8
change backlihght parameter value type to int8_t.
2001-03-24 16:08:36 +00:00
8c78f7fad3
add vrc4172pwm for MC/R520A(MobilePro770)
2001-03-24 15:56:59 +00:00
1907b28be1
add MobilePro770(MC/R520A) parameters.
2001-03-24 15:53:37 +00:00
478c6ce6b9
Adjust to new hardware driver <-> isdn layer 2 and above sheme.
2001-03-24 12:45:15 +00:00
132a113507
Do not hardcode the kernel segment register, and do not load the kernel
...
segment register in pmap_activate().
2001-03-24 05:30:57 +00:00
728aee3ccb
Some bios's when apm is disabled [or even some functions of it are disabled],
...
they keep giving error 0x30b. Unfortunately this keeps happening every second
making the console unusable. Keep track of the last error that occurred and
if the last 10 times apm was called the same error was returned, give up and
exit the apm thread.
2001-03-24 02:07:54 +00:00
8bd452c648
Create an MI Ether3 driver. It's derived from the arm26 driver, which uses
...
my MI SEEQ 8005 driver, which is based on the arm32 ea driver.
2001-03-24 00:14:52 +00:00
2714607c72
Add podulebus_shift_tag, which generates a bus_space_tag_t with a specified
...
address shift (stride). This is necessary because many podules have standard
chips with odd address-bus wiring to allow for using LDM for
bus_space_*_multi_*().
2001-03-24 00:10:42 +00:00
75b7bea508
Add MCA we(4) attachment for WD80x3 cards and clones. Tested with
...
WD8003W/A, card provided by David Brownlee (thanks!). The SMC Elite stuff not
tested since I don't have any; hopefully it's correct, should match
information in ADF files.
The MCA-specific init quirk taken from Linux smc-mca.c driver.
I don't quite grok why it works, but it does *cross fingers*.
The WD8003W/A seems to be quite a good choice. I get like 340KB/s on my
machine, where 3c523 does only like 310KB/s. The numbers would be probably
even better with faster CPU than 386DX :)
2001-03-23 19:25:35 +00:00
d2f3ad2de2
Support machdep.booted_kernel sysctl.
2001-03-23 11:10:10 +00:00
8f5f11180a
o add sysctl machdep.booted_kernel support.
...
o add sysctl machdep.root_devoce support.
2001-03-23 11:09:49 +00:00
95a27e3b60
Remove devices which don't exist on floppy based models.
...
Now boot floppy fits 1.4MB again.
2001-03-23 09:30:49 +00:00
7ed6dadd10
Handle bootargs passed by hpcboot.
...
Change stack pointer initialization.
2001-03-23 08:58:14 +00:00
3bf1867147
Rebuild after the bootarg change.
2001-03-23 08:51:23 +00:00
59b3c088fe
Pass bootargs like usual function calls.
...
Initialize sp register to more useful value.
2001-03-23 08:48:12 +00:00
07b77f05ce
Have LINEBYTES for jornada720.
2001-03-23 08:46:56 +00:00
5aa49b6404
Delete unused uvtopte() macro.
2001-03-23 01:27:59 +00:00
b47f68b66c
fix 'show registers' mis-aligned access, PR11580
2001-03-22 22:20:28 +00:00
40de0e48b0
add ELF kernel linker script.
2001-03-22 18:35:33 +00:00
5a79dd1121
load symbol table to DDB if ELF kernel.
2001-03-22 18:34:08 +00:00
7060cad775
recompile.
2001-03-22 18:30:49 +00:00
4e6c980fa0
add HD64461 UART serial console.
...
add SH3 SCI console method
add SH3 TMU register dump
use generic serial console when companion chip is unknown.
2001-03-22 18:27:51 +00:00
a7876b44d8
add file logging method.
2001-03-22 18:26:45 +00:00
044f4eb367
fix calcurating kernend bug.
2001-03-22 18:23:08 +00:00
87aeed6110
fix file handle leek.
2001-03-22 18:21:02 +00:00
bf58a25f9b
weakly machine dependent configuration moved to machine_config.cpp
2001-03-22 18:20:35 +00:00
62bef7c830
fix file pointer bug.
2001-03-22 18:19:36 +00:00
f0190d355c
add machine independent serial console method. (use WinCE API)
2001-03-22 18:19:09 +00:00
985f960311
add HP Jornada 690 Hungarian, German entry and
...
my target machines (CASIO Cassiopeia A-55V, HITACHI PERSONA HPW-650PA).
2001-03-22 18:16:13 +00:00
031c6d8c24
Add MCA ep(4) attachment, for 3Com 3c529-type cards. Tested with 3c529-TP,
...
provided to me by David Brownlee (thanks!).
Performance of this card is quite poor on my PS/2 with 386DX, like 100KB/s
at best, but as low as 5KB/s when transferring bigger files due to
packet overruns. It would be good to revisit this later, probably by
teaching the ic code to use RX Early.
2001-03-22 16:54:45 +00:00
74786e7894
remove overzealous locking changes.
2001-03-22 15:56:43 +00:00
23d323f4f9
Sync with amiga 1.15.
...
Make this compile again (when building the LKMs).
2001-03-22 12:47:11 +00:00
b711716241
A bit of ELF support. From scw.
2001-03-22 12:46:19 +00:00
2282e42ec2
Fix type in pliptransmit declaration (C version). Noticed by
...
Tyrel Beede <tb90@mail.csuchico.edu>.
2001-03-22 08:14:23 +00:00
0fa02bb6e6
sync with sparc64.
2001-03-22 06:21:43 +00:00
e563dea3f6
sync with sparc64 (just some debug messages.)
2001-03-22 06:21:15 +00:00
ce8902b7fe
Merge my MP tree. At this point, Daystar dual 604 card (i.e. Power Macintosh
...
9500/180MP and 9600/200MP) runs at least into single-user mode, possibly
multi-user mode (not stable yet).
2001-03-22 04:11:46 +00:00
2d6322c3be
Handle ELF symbol table.
2001-03-22 03:45:39 +00:00
9f60674a47
now that duplicated stuff has been moved to sys/conf.h, remove unnecessary
...
defs for: lpt, joy, pc
2001-03-21 23:42:14 +00:00
723cd818d8
move duplicate definitions for:
...
pc, lpt, joy, ocis, apm, satlink, i4bctl, i4brbch, i4btel, i4btrc, i4b
from the port-specific arch/*/*/conf.c files into sys/conf.h
2001-03-21 22:25:52 +00:00
4a933b0a25
VAX_STYP_690 added, from Lord Isildur.
2001-03-21 21:11:13 +00:00
912c115675
s/vm_page_alloc_memory/uvm_pglistalloc/ in panic message.
2001-03-21 18:40:28 +00:00
7e9512010c
Oops. I forgot this line.
2001-03-21 17:43:39 +00:00
4b32677535
Map DMA controller and disable its DMA channels.
2001-03-21 17:42:37 +00:00
f8dab8e69a
Make card insertion/removal work.
...
XXX powerdown and {io,mem}_unmap are still missing.
2001-03-21 16:16:35 +00:00
7c429e90c2
Handle interrupt polarity.
2001-03-21 16:08:34 +00:00
f1b9737b90
Fix nit.
2001-03-21 14:48:30 +00:00
d16849a006
Make this compile again.
2001-03-21 14:40:00 +00:00
b0b31f8cfc
Rebuild binaries after ELF symbol table support.
2001-03-21 14:18:28 +00:00
8c60f09e43
- Use ${PRINTOBJDIR}
...
- size -> ${SIZE}
2001-03-21 14:08:03 +00:00
358a8ee71a
Load ELF symbol table for DDB.
2001-03-21 14:06:25 +00:00
5b519fb0f9
Fill in framebuffer address for jornada720.
2001-03-21 14:05:10 +00:00
45480ac3bc
Move rules to create m68k and machine symlinks to common Makefile.inc.
2001-03-21 13:43:58 +00:00
577fa61b83
Enable interrupts before calling interrupt handler(s).
2001-03-21 11:38:39 +00:00
34e44075e0
- Remove "NOMAN= yes"
...
- Use "WARNS?= 1" rather than add warning options to COPTS.
2001-03-21 11:08:52 +00:00
650e6506dc
Remove "NOxxx= yes" lines since "MKxxx= no" is enough.
2001-03-21 11:02:24 +00:00
9ae0cb4d12
Make sure to create m68k and machine symlinks to include loadfile_machdep.h.
2001-03-21 10:58:54 +00:00
47e6a41505
only lock the kernel around sy_call if !SYCALL_MPSAFE
2001-03-21 09:01:16 +00:00
11fe9ca446
use ubc_winshift instead of ubc_winsize in pmaps to set up kernel
...
virtual space. the latter isn't initialized yet when the value is needed.
fixes PR 12440.
2001-03-21 03:16:05 +00:00
af58b235e0
adapt to systems with out interrupt-map & interrupt-map-mask properties.
2001-03-21 01:33:47 +00:00
b54ea24924
Merge in4_cksum().
2001-03-21 00:38:47 +00:00
de59def2f2
Remove spurious #define mod_base.
2001-03-20 23:29:07 +00:00
998606396f
Move struct podule_list and struct podule_description to podulebus.h.
...
They're MI, even if only arm32 actually uses them at present.
2001-03-20 23:27:04 +00:00
86d6442c28
Move machine-dependent podulebus headers to <machine/podulebus_machdep.h>.
...
<dev/podulebus/podulebus.h> is the canonical file to include, and includes
<machine/podulebus_machdep.h>.
<arch/${MACHINE}/poudulebus/podulebus.h> remains for backward compatibility.
2001-03-20 22:59:39 +00:00
61e80eef9b
As Richard Earnshaw pointed out, bus_space_copy_1() and bus_space_copy_2()
...
had the wrong names and did the wrong things. Both are now fixed.
2001-03-20 22:56:16 +00:00
df2b9ae2bd
Initial commit of wscons for the RiscPC/A7000 arm32 family. There is still lots
...
to do notably the mouse, some issues about 4 bpp modes and most of all Xwscons !
This code will still allow usage of the old vidcconsole complete with X etc.
Note that the wscons code can now only be booted with the new bootloader but
kernels compiled with vidcconsole can still be booted the old way.
2001-03-20 18:20:53 +00:00
1f21d8b280
hpcarm kernel is ELF.
2001-03-20 18:01:49 +00:00
b4095cd8bf
support HITACHI PERSONA configuration.
2001-03-20 16:05:42 +00:00
889e6d332a
initialize TMU
2001-03-20 16:04:01 +00:00
39081f8af1
make HD64461 UART module usable on HITACHI PERSONA
2001-03-20 16:03:28 +00:00
dc7eafe744
Redo previous. Instead of defining another type, mask upper bits of pvr.
2001-03-20 15:52:07 +00:00
482f11868a
Added dependency for "VIDCCONSOLE" (old console code) for the physcon char
...
device on console (makedev(4,0)) to aid in wscons transition.
2001-03-20 15:39:16 +00:00
adbed15428
Replace `bitsperpixel' by `log2_bpp' for thats the value that is in it
...
and not the number of bits per pixel !
2001-03-20 12:52:03 +00:00
e8f67fd5b7
`bitsperpixel' in the bootconfig structure is replaced by `log2_bpp'
...
for thats the value that is in it anyway and not the number of bits per pixel !
This to avoid confusion.
2001-03-20 12:50:08 +00:00
2ac5b2f7cf
Replace `bitsperpixel' by `log2_bpp' for thats the value that is in it
...
and not the number of bits per pixel !
2001-03-20 12:48:37 +00:00
96184e84cf
Add a diagnostic when we encounter an unknown boot device type.
2001-03-20 05:51:35 +00:00
7fec679447
sync to GENERIC 1.400
2001-03-20 05:49:32 +00:00
0fe2c0aedc
These have moved to sys/dev/podulebus.
2001-03-20 00:13:16 +00:00
2c4e09f4c9
Revert last change, which shouldn't have applied to this file.
2001-03-20 00:04:28 +00:00
23836945a3
Redefine bus_space_addr_t to be a raw address, for compatibility with arm32
...
podulebus drivers.
2001-03-20 00:03:10 +00:00
34cca2e23e
Pull in shared podulebus drivers.
2001-03-20 00:01:37 +00:00
2821b16ef4
Quick hack implementation of region ops. Not very pretty, but good enough
...
to get ei(4) working on arm32.
2001-03-19 23:56:45 +00:00
4d5762c860
This file depends on <machine/io.h>.
2001-03-19 23:03:59 +00:00
e7cc62cc44
A few #defines for the common podulebus API.
2001-03-19 22:59:13 +00:00
51e6b460ab
Slightly smaller code and tune for StrongARM.
2001-03-19 22:51:51 +00:00
1360c6c34c
add com at mca, bpfilter
...
add comment for elmc, describing what it is for
2001-03-19 22:08:17 +00:00
1c300d3ee8
Make pa_*_base bus_addr_ts.
2001-03-19 21:03:47 +00:00
7ba79ec9f4
Switch news68k to ELF:
...
- Move options EXEC_ELF32 to std.news68k
2001-03-19 17:06:11 +00:00
e0694eb01f
Switch news68k to ELF:
...
- Move options EXEC_ELF32 to std.news68k
- Add options COMPAT_AOUT_M68K to each config file
2001-03-19 16:59:19 +00:00
0b2a9fa53d
kill QUOTA on everglades.
2001-03-19 05:35:51 +00:00
c40daf0aed
change uvm_winsize to uvm_winshift so that we can avoid division
...
by a non-constant value.
2001-03-19 00:29:03 +00:00
e47583af2c
missed some KERN_FAILUREs.
2001-03-18 23:43:53 +00:00
77d7115444
Spelling mistake (saftey -> safety). No functional change.
2001-03-18 18:49:37 +00:00
e533061fce
in mem_access_fault*(), when invoking the pcb_onfault mechanism, pass the
...
return value of uvm_fault() to the onfault routine via %o0. users of
pcb_onfault now return this value to their callers rather than always
returning EFAULT. this allows i/o errors in VOP_GETPAGES() to be returned
back to read(), etc.
2001-03-18 17:11:22 +00:00
f8ffa07954
Always restore the spl value when returning form physconkbd.
2001-03-18 17:03:26 +00:00
62dd3b3608
Fix a couple of cases where we could return without restoring the
...
SPL value. Fixes a problem with the Xserver on A7000 kernels.
2001-03-18 17:00:56 +00:00
614827277d
Switch over to using podulebus_irq_establish().
2001-03-18 16:58:55 +00:00
5c98fe3fec
Gratuitous change of signature for podulebus_irq_establish(). It now takes
...
an opaque podulebus_intr_handle_t, which can be found in podulebus_attach_args.
It's actually the slot number, but don't tell anyone.
2001-03-18 15:56:04 +00:00
846f79ea76
LAMB uses nonstandard timer frequency. set TIMER_FREQ to appropriate
...
value (otherwise severe clock delay will result).
http://www.wildlab.com/bbs/logview.cgi?pg=9&no=521
2001-03-18 15:24:14 +00:00
3bb2b205f9
show the cpu a process is running on in proc
2001-03-18 14:24:10 +00:00
45d39a2030
redo previous slightly differently.
2001-03-18 14:10:34 +00:00
e82b5bb630
"mach slock" for simple_locks
2001-03-18 14:06:10 +00:00
949f93d279
If uvm_fault() returns an error, pass it on to the pcb_onfault handler
...
if there is one. They already arrange to return it to their callers.
2001-03-18 14:04:04 +00:00
1fae55f3ae
in trap(), when invoking the pcb_onfault mechanism, pass the return value
...
of uvm_fault() to the onfault routine via %eax. users of pcb_onfault now
return this value to their callers rather than always returning EFAULT.
this allows i/o errors in VOP_GETPAGES() to be returned back to read(), etc.
2001-03-18 02:53:09 +00:00
6c42a5d73a
Move over to using podulebus_irq_establish.
2001-03-18 01:31:03 +00:00
63059bd6dc
Remove redundant sc_ih from struct ea_softc.
2001-03-18 01:30:30 +00:00
b369fdfd44
Use podulebus_irq_establish().
...
To avoid complexity, don't bother with ea_irq_claim() and ea_irq_release() any
more. This driver will be replaced with an MI one soon eough -- it just
happened to be convenient for me to test.
2001-03-18 00:00:43 +00:00
f98a674d6d
Add podulebus_irq_establish(), with the same spec as the arm26 one.
2001-03-17 23:58:43 +00:00
d7e64c2e21
Method array for a really big inter-byte offset.
2001-03-17 22:03:12 +00:00
16198f2b92
Podulebus convergence:
...
pa_memc_[th] -> pa_mod_[th]
Add pa_easi_*
Add pa_*_base
Add pa_slot_flags to indicate whether EASI is supported.
2001-03-17 21:56:06 +00:00
14d2d5706f
Conditionalize inclusion of the interrupt handlers for 'kbd', 'zs' and
...
'ncrscsi' since they are not present on the Milan.
2001-03-17 20:56:31 +00:00
697e84ed46
Update for new location of podules.h and podule_data.h
2001-03-17 20:34:43 +00:00
e6a3d0d5c9
Move generated files from sys/arch/arm32/podulebus to sys/dev/podulebus.
2001-03-17 20:32:00 +00:00
255336b13c
Migrate known-podules list from arch/arm32/podulebus to dev/podulebus.
2001-03-17 19:05:19 +00:00
17b6222740
Small beginnings of podulebus convergence: Have podule drivers print colons
...
in attach messages, rather than doing it in podulebusprint().
2001-03-17 18:46:25 +00:00
bfc2063e69
Create an ARM2-specific undefined-instruction handler which deals with the
...
undef/SWI bug and handles emulating SWP.
Untested bacuse my ARM2 machine isn't currently set up.
2001-03-17 18:12:09 +00:00
3261555469
bump maxusers to 8
2001-03-17 09:55:32 +00:00
f3d3e9a30e
add elmc(4)
...
convert from memory disk to diskless-type config
2001-03-17 09:53:54 +00:00
0fcd32a415
"mach cpu" is MP only.
2001-03-17 01:54:17 +00:00
a5fdf3f1cf
Atari specific stuff to implement the Milan floppy. The Milan uses standard
...
ISA floppy hardware. Configure as:
fdcisa0 at isa? port 0x3f0 irq 6 drq 2
2001-03-16 21:31:55 +00:00
fab9e9b3bb
sc_port_units was set incorrectly at probe time.
2001-03-16 19:57:49 +00:00
9dfd56f6dc
Make this compile with "options DEBUG" again.
2001-03-16 18:11:57 +00:00
cda43785c6
Add comment on what 'overtemp' is about. OK'd by eeh.
2001-03-16 10:47:25 +00:00
e44f962032
steal a few mach commands from sparc64. add a #if 0'ed "mach cpu"
2001-03-16 10:28:53 +00:00
48fc32e16e
#ifdef DDB, add new function cpu_debug_dump(). define CPU_INFO_ITERATOR and
...
CPU_INFO_FOREACH.
2001-03-16 10:26:11 +00:00
e679c63257
Accept 8000Hz (XXX).
2001-03-15 19:55:16 +00:00
5eab0287fb
Use write-through caching for video ram. (Disabled by default, for now.)
2001-03-15 19:48:04 +00:00
4382a59d64
Add ulinear16 support.
...
Return EINVAL if specified rate is not available.
2001-03-15 19:42:42 +00:00
054158f994
HD64461 UART module support.
2001-03-15 17:30:55 +00:00
106c0aee60
setup bootinfo.bi_cnuse at bootloader phase.
2001-03-15 17:24:45 +00:00
123c25cc93
Remove PAGER_MAP_SIZE definition -- use default value. Instead, decrease
...
VM_MAX_KERNEL_BUF.
2001-03-15 16:06:59 +00:00
ac3bc537bd
eliminate the KERN_* error codes in favor of the traditional E* codes.
...
the mapping is:
KERN_SUCCESS 0
KERN_INVALID_ADDRESS EFAULT
KERN_PROTECTION_FAILURE EACCES
KERN_NO_SPACE ENOMEM
KERN_INVALID_ARGUMENT EINVAL
KERN_FAILURE various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE ENOMEM
KERN_NOT_RECEIVER <unused>
KERN_NO_ACCESS <unused>
KERN_PAGES_LOCKED <unused>
2001-03-15 06:10:32 +00:00
ef26546e15
lock the kernel around calling interrupt stubs.
2001-03-15 03:20:43 +00:00
122b3a0e67
sprinkle KERNEL_LOCK() and KERNEL_PROC_LOCK() where they're missing. add
...
SYSCALL_DEBUG support to trap.c.
2001-03-15 03:01:39 +00:00
c08eec9f47
Use hpc/hpc/disksubr.c.
2001-03-14 14:47:40 +00:00
300d398485
Move references to arm/arm/disksubr*.c from files.arm to
...
files.{arm26,arm32,dnard}.
2001-03-14 14:39:45 +00:00
b612a766a7
Handle overtemp intr.
2001-03-14 00:52:19 +00:00
c3c5158d00
Change the value of tf_pc in undefined-instruction handlers on arm32. It now
...
always points to the undefined instruction in question. It's up to the
handler to advance it to the next instruction if it wants execution to
continue there. This is how things have always worked on arm26.
2001-03-13 23:56:48 +00:00
ce3ad2275b
Update FPU detection to use remove_coproc_handler().
2001-03-13 23:51:48 +00:00
a7ba6bb441
Update for new linked-list undefined-instruction handler.
2001-03-13 21:00:13 +00:00
aebf9049d4
Update to use install_coproc_handler_static(), since install_coproc_handler()
...
isn't safe this early.
XXX hpcarm should use db_machine_init() to do this.
2001-03-13 20:52:48 +00:00
c72a18bddc
Separate out the SIGTRAP (gdb breakpoint) generator from undefinedinstruction()
...
so it's no longer a special case.
2001-03-13 20:22:02 +00:00
db1f089718
Initialise the undefined-instruction handler at startup.
2001-03-13 20:20:43 +00:00
bb17ec14d3
Conditionalise inclusion of opt_compat_svr4.h for the benefit of LKMs.
2001-03-13 18:47:19 +00:00
2e79fe1ec7
add SH4 configuration.
...
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.
2001-03-13 16:31:29 +00:00
43bd337868
Update for recent changes to the MI i82586 driver.
...
(added 'why' argument to the channel attention hook function)
2001-03-13 16:31:14 +00:00
ae8397d1f8
comment out:options WSDISPLAY_DEFAULTSCREENS=4
2001-03-13 03:44:23 +00:00
e2e5c62d49
Make this compile again (when building the LKMs).
2001-03-12 21:00:02 +00:00
c1faa5c059
enabled COMPAT_LINUX for sandpoint
2001-03-12 20:10:06 +00:00
c79d6f4378
Fix typo in comment reported by Yuji Yamano in kern/12391.
2001-03-12 17:26:37 +00:00
9f1a6e07a4
Round up block size to at least NBPG bytes.
2001-03-12 15:41:52 +00:00
ee1d25e7bd
* assume backlight is on if backlight value cannot get.
...
* move the lcd control codes used config_hook_call()
in *_hardpower() to *_power().
2001-03-12 08:54:25 +00:00
859d83dd22
* vrc4172pwm_get_light() return the value masked by VRC2_PWM_LCDEN_MASK.
...
* when resume from suepend, restore saved value instead of always on.
2001-03-12 08:46:27 +00:00
1bb261e173
Fix interrupt handling somewhat so that break signal gets DDB.
2001-03-12 03:27:18 +00:00
e4a4f09fa8
Make this compile again; chan_attn() prototype has changed.
2001-03-11 20:24:52 +00:00
1c10294eb2
ELF ABI requires address to be returned in A0.
...
Change an external reference from absolute address to PC-relative.
2001-03-11 20:15:02 +00:00
5a182288c0
ELF ABI requires address to be returned in A0.
2001-03-11 20:10:04 +00:00
751017e6c1
Pack the ExecBase structure to avoid aligning contraint problems with ELF
...
compiler
2001-03-11 20:09:07 +00:00
cb1bebe07e
remove unneeded include.
2001-03-11 16:45:13 +00:00
b1475781a2
Make arm26 implementation of DDB slightly less gratuitously different from the
...
ARM one. Also update for recent undefined-instruction handler changes.
2001-03-11 16:31:05 +00:00
ce5529eabf
Change undefined instruction handler to use a linked list for each
...
co-processor. This is necessary so we can have several handlers for
CP0 (used as a catch-all for non-CP instructions).
Handlers are now removed using remove_coproc_handler(), rather than by calling
install_coproc_handler() with a NULL handler.
Because install_coproc_handler() can now allocate memory, there's a version
for use at boot time that doesn't.
2001-03-11 16:18:39 +00:00
c6c5fda4be
Use <arm/undefined.h>
2001-03-11 16:14:36 +00:00
4624a1247e
Make this suitable for use on arm26 as well.
2001-03-11 16:02:21 +00:00
5f8b55f7c3
Pass a softc pointer around everywhere, and use it when we need the name of
...
the device.
Don't pretend that fpe0 and fpu0 exist as devices (they don't).
G/C a few items related to /dev/cpu* support.
2001-03-11 15:05:43 +00:00
ffe630e7c3
Sync with sa11x0_reg.h rev 1.4.
2001-03-11 14:37:03 +00:00
1ab9404c3c
Fix definition of MQ200_GCR(n). This definition was quite bad!
2001-03-11 13:53:31 +00:00
43d63b4d48
Make hpcboot functional when jornada 720 or iPAQ is selected
...
at the boot menu.
2001-03-11 11:47:24 +00:00
b9b387d9b1
Remove function decl that doesn't belong in cpu.h
2001-03-11 09:20:58 +00:00
13de0e4f2b
1. Remove cpu_exec_ecoff_hook
...
2. Invoke KGDB if booted with RB_KDB flag
3. Don't round up page address when zeroing BSS - this can overwrite debug
symbols
2001-03-11 09:19:31 +00:00
ea4611b0cd
add ExtendedGPIO desc of iPAQ H3600
2001-03-11 07:27:36 +00:00
2cb44b8020
add h3600 and jornada720 gpio port and irq
2001-03-11 06:00:42 +00:00
5cb5569c63
Apply 'CF hack' to all model of Cassiopeia E series.
2001-03-11 05:18:51 +00:00
f61ad8fa80
G/C more unused elements of struct _cpu.
2001-03-11 00:14:56 +00:00
d005972168
"needs-flag" for cpu is no longer needed.
2001-03-11 00:11:05 +00:00
782a7670e9
- The ioblix zbus board comes in 24 MHz and 22.1184 MHz clock variants.
...
We default to the (newer, more sane) 22.1184 MHz value, but set it from
the iobzclock variable (in Hz), which is initialized from the IOBZCLOCK
configuration option and patchable.
XXX we should time the clock at system startup.
- add ioblix_zbus to the GENERIC configuration.
2001-03-10 23:55:29 +00:00
c7bfcc0130
These are no longer used.
2001-03-10 23:31:32 +00:00
29e609e3c5
Update for recent changes to the i82586 driver.
2001-03-10 22:32:17 +00:00
ca5024c3a1
Add code to point out to the user if their CPU isn't supported, and to
...
suggest what kernel options to use to get it to work.
2001-03-10 21:27:06 +00:00
b362a4bef3
Change the meaning of cpu_class. It now has one value for each core we
...
support, which corresponds to one for each CPU_* option, or one for each
cpufunc structure.
Also remove some more residual code for the support of multiple and non-ARM
CPUs.
2001-03-10 20:15:46 +00:00
c24be229f5
Don't allow the I and F (IRQ and FIQ disable) flags to be set in the PSR
...
by sigreturn. This prevents user processes disabling interrupts by messing
with their signal context.
2001-03-10 20:08:55 +00:00
b01c113e98
ARM7TDMI != ARM7 for our purposes (it has an ARMv4 CP15).
2001-03-10 20:03:51 +00:00
a9e9b871de
Add sacc, sacpcic, and sagpcic.
2001-03-10 19:05:40 +00:00
f14e35f58e
Driver code for SA11x1 based PCMCIA devices.
2001-03-10 19:01:27 +00:00
79d31f6571
Common driver code for SA11x0 PCMCIA function.
2001-03-10 19:00:39 +00:00
57abc92eeb
This file is no longer used. PCMCIA driver code is divided into
...
sa11xx_pcic*, sa11x0_pcic* and sa11x1_pcic*.
2001-03-10 18:59:22 +00:00
51cdfbfa9b
Fix error on config without options news1700.
...
DC_BE and IC_BE bits are enabled at runtime since rev 1.7.
2001-03-10 18:58:16 +00:00
2d36b2225d
Support SA1111 companion chip.
2001-03-10 18:50:37 +00:00
7346883e17
Don't include opt_compat_svr4.h on building LKM.
2001-03-10 18:39:04 +00:00
bf5e18af99
Add param.h to INCS.
2001-03-10 18:32:25 +00:00
356943c6c4
Fix nit. Read functions were actually writing. :-(
2001-03-10 17:32:14 +00:00
c5be09ee66
add README.
2001-03-10 16:24:54 +00:00
0bcb071684
Correct CPU_ID_ISOLD() and CPU_ID_IS7().
2001-03-10 16:19:59 +00:00
3a52278a23
Map GPIO registers in saip.
2001-03-10 15:34:38 +00:00
4c08e34e90
hpcarm/hpcarm/ast.c is no longer.
2001-03-10 14:10:51 +00:00
b2cb6de80e
Use sa11x0_bs_tag instead of mainbus_bs_tag.
2001-03-10 13:34:34 +00:00
a62d9f6fa0
Handle the offset argument in bus_space_{read,write}* correctly.
2001-03-10 13:29:38 +00:00
4333644371
Copy bus_space_map() function from arm/mainbus/mainbus_io.c.
2001-03-10 13:27:53 +00:00
8cba02bdf9
Turn off options JUPITER temporarily.
...
This may cause problems on some newer accelerators.
We might have to write a more accurate detect code.
2001-03-10 03:23:09 +00:00
b44e732ff6
Expand bus_dma implementation. It will now handle the bounce buffer
...
extensions needed to make the isa floppy driver on the Milan work.
2001-03-09 20:55:46 +00:00
85868e3c09
Pay attention to BUS_DMA_STREAMING when builing an IOMMU TTE.
2001-03-09 20:05:39 +00:00
9224009c5d
Fix bugs in delay().
...
- it could wait infinitely.
- large roundoff error.
2001-03-09 18:55:29 +00:00
1f9f430e03
Patch from Richard Earnshaw:
...
Add some calls to drain the write buffers -- these are particularly
important when we are trying to synchronize I$ and D$.
2001-03-09 16:24:51 +00:00
5a6e5a05e3
Increase the size of regions for which we use the single line flush
...
commands -- profiling shows this to be a major win over flushing the
entire cache (since the likelihood is that such lines won't be in the
cache anyway).
Patch supplied by Richard Earnshaw.
2001-03-09 16:17:19 +00:00
aa76b5208c
Make it compile again after arm, arm32 changes.
2001-03-09 12:13:15 +00:00
1b84e6fb33
pasto: sc_maddr => sc_mem
2001-03-09 10:19:54 +00:00
80214041c7
support WSDISPLAYIO_SVIDEO/WSDISPLAYIO_GVIDEO.
...
lcd on/off
2001-03-09 08:54:18 +00:00
f6c36838ae
Use the same undefined-instuction handler on both arm26 and arm32. The handler
...
is derived mostly from the arm32 version, but with a check for an obscure ARM2
bug thrown in.
arm26 fpu and cpu drivers use the new interface for catching undefined
instructions.
2001-03-08 21:30:35 +00:00
c0aee693f5
Add a missing part of FPU support.
2001-03-08 21:12:48 +00:00
6288edb5bd
Add rcsid.
2001-03-08 19:21:53 +00:00
736e48bc36
enable CF slot.
2001-03-08 15:21:31 +00:00
41207e71d6
channel 1 interface don't provide fake pcmcia io space tag.
2001-03-08 15:13:14 +00:00
5dedbd1c97
Duh, don't forget the proc argument.
2001-03-08 01:46:18 +00:00
3423154d78
Use bus_dmamap_load(), not bus_dmamap_load_raw().
2001-03-08 01:38:57 +00:00
2c4c690f14
Add the BUS_DMA_STREAMING flag.
2001-03-07 22:42:16 +00:00
5e917b9c4d
Add another CPU ID for G4; PowerBook G4 has different PVR value.
2001-03-07 12:44:05 +00:00
83eac66533
Cosmetics.
2001-03-07 08:18:45 +00:00
973904ff17
Include trap_subr_mp.S if MULTIPROCESSOR is defined.
2001-03-07 08:12:55 +00:00
bf498eb12e
Remove MULTIPROCESSOR part. (moved to separate file)
2001-03-07 08:10:44 +00:00
90aabafdd1
MP version of trap routines.
2001-03-07 08:05:07 +00:00
20d5755843
Set the PCI mem tag to 0. The BAR already contains the value that was here.
2001-03-07 05:52:28 +00:00
4e77731eee
Fix inverted preprocessor logic. (Spotted by Charles.)
2001-03-07 01:47:02 +00:00
7ffa2a0375
Add RTC_OFFSET support to inittodr() on dreamcast.
...
No changes to other sh ports.
2001-03-07 00:47:22 +00:00
4ada0ac792
Create cpufunc_null_fixup() to replace all the CPU-specific abort-fixup
...
routines that did nothing.
2001-03-06 22:29:13 +00:00
51aeeceeaf
Clean up TLB trap handling a little.
...
- When printing a user trap, include p->p_comm in the message.
- In the TLB fault handler, don't just go charging along if
the fault can't be handled. If we get a fatal kernel TLB
fault, we need to panic! Or, if DDB is enabled, call the
Debugger().
2001-03-06 21:58:23 +00:00
9fcf8e36a4
Sync with reality. Add NetBSD tag.
2001-03-06 20:16:09 +00:00
d6ff14bfde
Update the defaults of MAXTSIZ, DFLDSIZ, MAXDSIZ, DFLSSIZ to those used
...
in macppc.
2001-03-06 20:11:41 +00:00
7446055d62
Disable interrupts during autoconf.
...
Move identifycpu() from machdep.c to autoconf.c, make it table-driven, and
add a few more models to it.
2001-03-06 20:10:20 +00:00
237ef77d7f
Optimize a little more for the case where `off' is entirely covered by one
...
mbuf -- which is always is.
2001-03-06 19:20:51 +00:00
f7a6910822
Rework the in4_cksum() code a bit.
2001-03-06 19:14:37 +00:00
e55dd7530b
Use assembly version of in4_cksum (which is a piece of code that
...
does some of the extra work and then jumps into in_cksum).
2001-03-06 14:55:13 +00:00
a917eabaec
* A couple of `#if defined(SUN4M)' should be `#if defined(MULTIPROCESSOR)'
...
* Print notice if not all CPUs were attached
* Switch to SMP version of cache flush routines in just one place: in
cpu_attach() after all known CPUs have been configured.
2001-03-06 13:39:22 +00:00
f1d2503dc5
rework pci_attach_hook() to just deal with the INO, not the full
...
interrupt number. properly find interrupts for the E250. modify
pci_intr_map() accordingly. retire psycho_intr_map(). deal with
INO values upto 0x3f, not upto 0x32. restructure sabre_init() and
psycho_init() to be more similar, and display each psycho's IGN.
psycho_intr_establish() deals with INO upto 0x3f, values from 0x32
and higher get 0 for IPL.
tested on E250 & U5.
2001-03-06 08:09:16 +00:00
b7cd0eeaac
Move arm32/arm32/ast.c to arm/arm32/ast.c
2001-03-06 07:52:35 +00:00
1a533a81d6
add sigmarion parameter.
2001-03-06 03:14:39 +00:00
3ec18a1616
General prettification (mostly comments).
2001-03-05 23:29:32 +00:00
78eae7d026
ANSIfy.
2001-03-05 23:14:22 +00:00
83b8de43dd
Move undefined.c from sys/arch/{arm32/arm32,hpcarm/hpcarm} to sys/arch/arm/arm
...
in preparation for making it usable on arm26 as well.
2001-03-05 23:06:14 +00:00
b91b8796d9
Implement MSGBUFSIZE option.
2001-03-05 16:46:09 +00:00
8eeb7a8a79
mp_{pause,resume}_cpu(): avoid crash when cpu(s) not yet configured.
2001-03-05 16:45:22 +00:00
f3c74253b0
Fix `flags' argument to pmap_enter().
2001-03-05 16:43:34 +00:00
f860eda596
This file hasn't been in use for a long time.
2001-03-05 16:02:23 +00:00
f21f718031
Typo in previous.
2001-03-05 12:15:38 +00:00
0e3e6118a9
Add awi* at pcmcia.
2001-03-05 11:31:14 +00:00
90e5095df2
Fix syntax error in previous change.
2001-03-05 07:16:19 +00:00
850f81157a
Fix an error printf format.
2001-03-05 07:11:18 +00:00
4e14c96788
In debug printf: missing quote on format string.
2001-03-05 07:04:01 +00:00
ffa74abf2f
- Add "Features Enable" and CDB bits to SCSI controller config
...
- During un-aligned writes: Don't accidently leave the DMA engine active
after priming the FIFO between calls to asc_dma_setup and asc_dma_go
2001-03-05 05:04:29 +00:00
9cf464f7d1
no longer keep a copy of the volume header in cpu_disklabel
2001-03-05 04:58:09 +00:00
680c13c7d4
- brelse() was called twice after reading disk label
...
- re-read RISC/os volume header off disk before writing new label
in case it was updated by installboot utility
- no longer keep a copy of the volume header in cpu_disklabel
2001-03-05 04:54:07 +00:00
d152e7d2f8
Off-by-one error on v_absolute_size fixed.
2001-03-05 02:45:24 +00:00
25ec015449
Merge setregs() from sys/arch/arm32/arm32/machdep.c,
...
sys/arch/hpcarm/hpcarm/machdep.c and sys/arch/arm26/arm26/vm_machdep.c
into sys/arch/arm/arm/arm_machdep.c.
2001-03-04 23:25:00 +00:00
88951e75fa
Rather than using a list of CPU IDs, take a heuristic approach to working
...
out which set of functions to use. This should help cope with the fact that
my list of CPU IDs is probably incomplete.
2001-03-04 23:13:29 +00:00
a1b18f9435
Fix syntax error in previous.
2001-03-04 21:28:11 +00:00
bac5be6461
Simplify `bad alias' handling in pv_link()/pv_unlink():
...
- there's no need to have different PV_NC flags for sun4[c] & sun4m
- deal with kvm_uncache() being called on a managed page in a
separate helper function that deals with the caching state
within the pv list for that page, avoiding interference with
the `bad alias' removals in pv_unlink().
Note that currently never called for managed pages, but for now I'm
keeping the support in.
2001-03-04 21:12:24 +00:00
d22da292a6
Man page moved to share/man/man8/man8.atari.
2001-03-04 20:54:12 +00:00
b8c15cce4e
Man page is now in share/man/man8/man8.atari.
2001-03-04 20:51:51 +00:00
df594988e2
Add enhancements :
...
boot sector and bad sector list are preserved by default, use 'z' to change
type NNNm to make a partition size NNN megabytes
type `-N' at `root' and `start' prompts to start after partition N
type `-N' at `size' prompt to end before partition N
type `-1' at `size' prompt to end at end of disk
display pauses if 10 or more partitions to display
2001-03-04 20:49:27 +00:00
2bfaa741b1
remove disksubr since they are common.
2001-03-04 20:47:03 +00:00
a4ee61bc1e
eliminate a lot stuff that's not needed.
2001-03-04 20:45:03 +00:00
d6fc837c17
more vm_offset_t/vm_size_t -> {p,v}{addr,size}_t changes
...
move pmap_* declarations to pmap.h. fix conflicts this
exposed (e.g different definitions for pmap_bootstrap).
2001-03-04 19:05:55 +00:00
23c73a6e1c
regen.
2001-03-04 17:01:15 +00:00
0d9b26cd0e
make this compile on WCE200 SDK
2001-03-04 16:59:47 +00:00
07005e3818
sync with pbsdboot. (CASIO Pocket PostPet)
2001-03-04 16:52:44 +00:00
aa7c0fa2c7
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0
2001-03-04 16:51:04 +00:00
3345fe4477
Fix intrnames and intrcnt since there is no statclock on news68k.
2001-03-04 16:24:39 +00:00
ea0e8d2320
Remove unused getsp().
2001-03-04 16:21:05 +00:00
0f2df04d95
Add "-e start" to LDFLAGS for ELF toolchain.
2001-03-04 16:15:50 +00:00
1dff14e5c9
Include files.aoutm68k for COMPAT_AOUT_M68K.
2001-03-04 16:14:21 +00:00
0618726202
ANSIfy while I'm here.
2001-03-04 15:40:17 +00:00
b301668cb5
build sparc64 bootblk, ofwboot, & ofwboot.net on sparc
2001-03-04 15:34:45 +00:00
496829a88b
Make compat_13_sys_sigreturn() work on arm26, and move it from
...
arch/arm/arm32/compat_13_machdep.c to arch/arm/arm/compat_13_machdep.c.
2001-03-04 15:27:03 +00:00
e85a9ee949
this is a sparc64 program. so -DSUN4U, machine -> sparc64. cleanup.
2001-03-04 14:50:05 +00:00
8054b2ad5f
dev/cons.c is supplied by files.arm.
...
XXX should it really be?
2001-03-04 14:38:29 +00:00
aa34be4532
Make "options ARMFPE" work again.
...
Mostly due to Richard Earnshaw.
2001-03-04 14:32:12 +00:00
ab8e9aaefd
Add CPU ID for ARM7500FE (determined empirically from two I've got here).
2001-03-04 14:26:26 +00:00
0bf382d920
Remove redundant cdev_decl(cpu).
2001-03-04 14:14:23 +00:00
76c3f04bcb
move etext after rodata, like kern32.ldscript and sparc's kern.ldscript.
2001-03-04 13:41:00 +00:00
8a4900c534
Hook in px & pxg devices.
2001-03-04 13:36:19 +00:00
0a1cdb5f63
allow sparc "make release" to build a sparc64 capable 32 bit kernel.
2001-03-04 10:12:56 +00:00
de13b6986c
deal with 32 bit kernels.
2001-03-04 10:11:56 +00:00
90656ebe47
sync with GENERIC; add COMPAT_SVR4_32
2001-03-04 10:10:42 +00:00
3125147a72
oops; make this build with a 32 bit compiler again.
2001-03-04 09:28:35 +00:00
b575ca9f67
Remove local copies of these since they are now shared and are
...
in arm/arm32
2001-03-04 08:29:22 +00:00
93c0e77b0f
Only define MACHINE & MACHINE_ARCH in port-dependent param.h.
...
Everything else (since it's common) is from <arm/arm32/param.h>
2001-03-04 08:28:51 +00:00
58438fb425
Move compat_13_machdep.c, strstr.c, copystr.S, bcopyinout.S, and
...
bcopy_page.S to arm/arm32 and remove port-local copies.
2001-03-04 08:25:38 +00:00
fb90007fcb
sync with GENERIC 1.400
2001-03-04 07:34:20 +00:00
4679f9115c
Convert some vm_size_t to vsize_t/psize_t. Change vaddr_t to paddr_t
...
where appropriate.
2001-03-04 07:30:19 +00:00
eed23d4b3c
Fix EXEC_ELF to EXEC_ELF32
2001-03-04 07:11:41 +00:00
3c79bccb29
Need one of these.
2001-03-04 06:06:57 +00:00
3171013cfe
More merging.
2001-03-04 05:55:43 +00:00
d2716435ef
More includes for <arm/*.h>
2001-03-04 05:52:58 +00:00
f97f725bc9
Remove OFW hooks. Allow ports to add there own hooks via
...
ARM_EXTRA_DB_COMMANDS.
2001-03-04 05:40:03 +00:00
c074920294
Add PocketPostPet entry.
...
The version number is 1.17.2 2001.03.04.
2001-03-04 05:38:19 +00:00
4a5fdbf390
disksubr*.c are now shared. Start moving files from ../../arm32/arm32
2001-03-04 05:17:41 +00:00
aada69afd5
Synch with file movement.
2001-03-04 05:15:39 +00:00
fb62f0c378
These have moved to ../../arm/arm (disksubr*.c) or ../../arm/arm32
...
(everything else).
2001-03-04 05:14:06 +00:00
8655276e9a
Move these from arm32/arm32
2001-03-04 05:11:41 +00:00
0cb5085286
BUGFIX: These string data, 'MEMORI- KA-DO...' didn't have any terminater.
2001-03-04 05:11:31 +00:00
4e6f220e99
Move these from arm32/arm32
2001-03-04 05:08:43 +00:00
e18e70f67e
Add some diagnostic code.
2001-03-04 05:08:29 +00:00
7d33ba27bf
Move from arm32/arm32. s/vm_offset_t/vaddr_t/g
2001-03-04 05:08:09 +00:00
79efd2285e
These are same between arm32 & arm26.
2001-03-04 05:06:51 +00:00
6755bfc8c1
s/vm_offset_t/vaddr_t/g
2001-03-04 04:15:58 +00:00
7af4578cfc
s/vm_offset_t/vaddr_t/g
2001-03-04 03:40:58 +00:00
49cddb00a7
Add platform id and keymap for CASIO PocketPostPet.
2001-03-04 03:40:39 +00:00
92e92121ab
Use shared arm/arm32/sysarch.h
2001-03-04 03:33:50 +00:00
b997b57700
Use shared arm32 pmap.h
2001-03-04 03:31:32 +00:00
7e5ee89ff3
Nuke vm_offset_t, vm_size_t from powerpc.
2001-03-04 03:25:34 +00:00
5d1d7ca9ca
Remove a shark dependency in machdep. Use booted_kernel instead of
...
boot_kernel to be similiar to booted_device.
2001-03-04 01:50:53 +00:00
a6ecc2d5de
Made it possible to mmap the frame buffer.
2001-03-04 01:36:35 +00:00
40333cf8fd
Kill cpu_host and cpu_flags: they weren't having any practical effect.
2001-03-03 21:34:00 +00:00
f693207ab0
Support cross-compilers that add the underscore for a little longer.
...
This _will_ go away.
2001-03-03 19:45:57 +00:00
51668836b3
Remove unused declaration of `cpcb', which is no longer a global variable.
2001-03-03 19:42:38 +00:00
d74da58795
alloc_cpuinfo: zero all the memory we allocate; not just the `cpuinfo' part.
...
cpu_attach: initialize `curpcb->pcb_wim' for each additional CPU.
2001-03-03 19:40:28 +00:00
bb5f16e6e0
Sprinkle KERNEL_PROC_LOCK()s at the kernel entry points.
2001-03-03 19:11:02 +00:00
c32dba2092
Remove support for /dev/cpu*. This code has never done anything useful anyway.
2001-03-03 18:04:34 +00:00
2a91058dd3
Remove spurious declaration of initialise_fpe().
2001-03-03 17:49:58 +00:00
2029721f3f
NCPU will always be 1 if this file is being compiled at all, so don't bother
...
checking it.
2001-03-03 17:46:31 +00:00
f578e88d0f
Re-design identify_arm_cpu() to use a table of CPU types. This also makes
...
it easy for it to identify lots of CPU types, so have it do that too.
2001-03-03 17:09:25 +00:00
956f5fbe42
Add one missed register prefix.
2001-03-03 13:59:10 +00:00
e02e19f6b7
Fix id which appeared twice, which are of HP and CASIO. You get incompatibility
...
around hpcarm.
2001-03-03 12:56:38 +00:00
32f9bdbadc
BUGFIX:
...
- line number go wrong when directives appear.
- a directives in a pair of {} make syntax error.
2001-03-03 12:51:44 +00:00
22961fea9b
Enable CD and microphone sound input on paddington based systems.
2001-03-02 20:36:00 +00:00
27e08ba42c
fix matrix switch initial value.
2001-03-02 19:21:53 +00:00
28b76ec777
rewind progress bar when boot button is pushed.
...
(SH3) if check box on console window is checked, dump system register.
2001-03-02 18:26:37 +00:00
bba5d36487
Initialize the IPI message locks.
2001-03-02 17:00:13 +00:00
626864333b
Use ${NM} and ${SIZE} so cross-compiling works. The machine and m68k include
...
directories still need to be fixed.
2001-03-02 16:46:19 +00:00
f9e9387cf0
More missing register prefixes and _C_LABEL()s for ELF. Should now compile
...
with ELF, but still needs an "elf2bb" program.
2001-03-02 16:43:25 +00:00
5864b6d958
More missing register prefixes.
2001-03-02 16:29:41 +00:00
0548d12369
* proc_trampoline: call `proc_trampoline_mp()' #if MULTIPROCESSOR;
...
currently necessary to acquire the `running in kernel mode' lock;
pointed out by Bill Sommerfeld/Simon Gerraty.
* remove reference to `cpu_set_kpc()' from comments, as we don't have it.
2001-03-02 10:27:00 +00:00
e999fb6b77
bootstrap area: remove dead code + some trivial reformatting
2001-03-02 09:48:13 +00:00
f199529e4b
add MC/R430(copy of MC/R530)
2001-03-02 09:14:36 +00:00
ecb878c12d
sync with GENERIC32.
2001-03-02 07:56:26 +00:00
3c2cb5a456
- no need to hard wire pci busses or hme0 anymore
...
- clean up some comments
- __ELF__ is defined by the compiler
2001-03-02 07:50:08 +00:00
23fecf2b24
clean up slightly; prepare to make this identical to sparc/frame.h.
2001-03-02 07:40:18 +00:00
3c31d4fccb
clean up slightly.
2001-03-02 07:36:57 +00:00
7a1cb1dbc2
use pci_bus_devorder() and pci_dev_funcorder()
2001-03-02 06:34:06 +00:00
5cc6423696
Fixed the bug that crept into giving support for moving IOMDs during startup.
...
Initially I gave it the type `int *iomd_base' but some macro's defined in
iomdreg.h calculated with the value asuming it to be an int ... thus all the
registers offsets were multiplied by four and that can only mean trouble !
The kernel boots again ever happily. Sorry for the inconvenience... it was
a good bug hunt though!
2001-03-02 01:46:57 +00:00
33090db137
Harmonized keycodes with USB.
2001-03-02 00:25:06 +00:00
5b15e666a1
ARM7100 -> ARM710A, following information from reinoud.
2001-03-01 23:45:56 +00:00
104415e253
Dropped the leading underscore on _etext and _end, due to move to ELF.
2001-03-01 23:35:20 +00:00
389ac2109b
Kernel binary format is hereby officially changed to ELF32.
2001-03-01 23:34:08 +00:00
8931aeb7a9
Don't use the frames' provided EA yet; something is wrong.
2001-03-01 22:01:52 +00:00
db27e55251
Add register prefixes.
2001-03-01 21:32:53 +00:00
8770ff2900
Sync with news68k:
...
Remove unneeded COMPAT_HPUX stuff.
2001-03-01 17:11:13 +00:00
d98e8d5bca
* Correct the `flags' argument in call to pmap_enter().
...
* Enable the message buffer at a temporary virtual address (KERNBASE)
in bootstrap(), if that can be done.
2001-03-01 16:14:25 +00:00
813b8d79fd
* Correct the `flags' argument in several calls to pmap_enter().
...
* message buffer initialisation:
- change the buffer size to 8192 on all platforms
- don't assume the buffer is always located at physical address 0
- drop the SUN4 hack that left first half of the page unused;
I believe this is no longer necessary, since the msgbuf
data structure is duely sanity-checked before use in initmsgbuf().
2001-03-01 16:09:25 +00:00
6ae8b9ec6d
Drop MSGBUFSIZE; we don't use it and it can't currently be configured
...
to a different value anyway.
2001-03-01 15:59:04 +00:00
80ba31bd21
Drop the managed() macro; it is no longer used.
...
State the intended use of the vm_{first,last,num}_phys variables that are
still exported from pmap.c.
2001-03-01 15:56:47 +00:00
aad0b0bcd2
Change `pv list' management to use the hooks provided in the `vm_physmem'
...
structure. While this comes with the cost of having to search the
`vm_physmem' array every time need to find a PV entry corresponing to
some physical address, we gain the flexibility needed to support
arbitrary non-contiguous ranges of physical memory addresses.
Also, eliminate the need to sort the memory address ranges as presented
by the machine's PROM, and the requirement that physical memory starts
at address 0 (when possible).
2001-03-01 15:52:18 +00:00
e6ae4943c2
Fix a bug in cpu_switch().
...
Reported by Tad Hunt <tad@entrisphere.com> on port-powerpc.
2001-02-28 20:44:41 +00:00
129bc9a446
Sync cdevsw and chrtoblktbl.
2001-02-28 19:14:30 +00:00
86f265568f
Back out previous change. It was harmful on my PowerBook G3.
2001-02-28 18:49:29 +00:00
c25aec3d9f
PCB convergence, part the first:
...
Move the pointer to the current user trapframe from struct mdproc to struct
pcb (as on arm26). Only tested by compiling kernels on arm32 and
hpcarm (dnard seems to be incomplete anyway). Someone should try running one.
2001-02-28 18:15:42 +00:00
c452d0b725
adjust some comments to reality.
2001-02-28 15:21:08 +00:00
5ef9914b06
add and user a linker script.
2001-02-28 15:17:48 +00:00
b87a62e09a
Make sure that e.g. myetheraddr() has a valid idprom pointer as soon as
...
possible on sun4, since it may be used before the clock attaches.
2001-02-28 14:45:23 +00:00
fddf453e7a
Allow for size=0 case in copyin(), copyout() and kcopy().
2001-02-28 11:55:39 +00:00
e2bb0a8f78
Recognize NETBSD & NETBSD/MACPPC parition types, default HFS to parition d.
...
Exclude FWDRIVER.
2001-02-28 03:02:29 +00:00
163eba47d8
Use <arm/cpu.h>.
2001-02-28 00:17:40 +00:00
b4e78a4e60
Large overhaul for arm26 compatibility. This file is now even more of a mess
...
than it was.
2001-02-28 00:17:18 +00:00
721e39d0dc
add SES device
2001-02-28 00:08:18 +00:00
312d560493
add SES device (unused #4 )
2001-02-28 00:06:28 +00:00
fa45b68520
Actually remember to look up the system call we're trying to invoke.
...
Oops.
2001-02-27 23:57:30 +00:00
18026ec99d
* Make PAGE_SIZE et.al. constants, if possible.
...
* Add pvlist pointer to `struct pmap_physseg'
* Because of the above, add guard against multiple inclusions.
2001-02-27 22:40:08 +00:00
32994a72dc
revert previous commit while the longbeards ponder
2001-02-27 22:00:19 +00:00
4eff912cbb
Remove cpu_wait #define because it's now prototyped in <sys/proc.h> which
...
means it has to really exist.
2001-02-27 21:11:41 +00:00
4cb4b8642c
Make it compile again...
2001-02-27 20:27:17 +00:00
3500dc208f
Centralise declaration of memc_base
2001-02-27 20:23:11 +00:00
b8c8050369
Define iomd_base ... make it compile again
2001-02-27 19:57:51 +00:00
82f3142780
fix NetBSD RCS id tags
2001-02-27 19:04:39 +00:00
5cd12d1f9e
Make it compile again
2001-02-27 18:33:26 +00:00
d4eb8fb142
Also forgot to declare the iomd_base.
2001-02-27 18:30:46 +00:00
d35a86c1a6
Forgot to declare iomd_base since it isnt in iomdreg.h anymore due to the
...
inclusion of this file in assembler.
2001-02-27 18:29:36 +00:00
748ec610af
opt_armfpe.h isn't arm32-specific any more.
2001-02-27 17:57:55 +00:00
4b483d7606
Move "options ARMFPE" to files.arm, so generic ARM files can use it.
2001-02-27 17:56:31 +00:00
a1f5b79d02
Add gpio hook.
2001-02-27 17:49:54 +00:00
088fe8f336
<arm/armreg.h> isn't arm26-specific any more.
2001-02-27 17:42:16 +00:00
22260fa7fd
Tidy up ARM7500 restrictions.
...
Also insist on precisely one of PROG32 and PROG26's being turned on.
2001-02-27 17:35:49 +00:00
5b52fda1e6
cpu_number() macro has no args
2001-02-27 16:00:27 +00:00
639dd9ffea
Rollback of patch ... there was a bug in the proc.h
2001-02-27 15:39:57 +00:00
807ebaec96
Stop using #ifdef arm32, since future NetBSD/arm ports are likely
...
not to provide it.
For things which are historical oddities of NetBSD/arm26, use #ifndef arm26.
For things which are inherently dependent on the size of program space in use,
use #ifdef PROG32 (and include opt_progmode.h).
2001-02-27 14:11:30 +00:00
0aa1f3d01e
modify target name because we can't recommend to use pkgsrc/cross
...
(though I'm not the person who did such BAD modification)
2001-02-27 14:05:53 +00:00
00b8524181
KNF
2001-02-27 14:00:24 +00:00
9a1c596b0b
cpu_wait() is now in vm_machdep_arm.c
2001-02-27 13:58:13 +00:00
b8e5bc569c
* add WSDISPLAYIO_PARAM_BACKLIGHT, WSDISPLAYIO_PARAM_CONTRAST,
...
WSDISPLAYIO_PARAM_BRIGHTNESS supports.
2001-02-27 08:54:17 +00:00
269197a956
add vrc4172pwm for MC/R530A, MC-R700.
2001-02-27 08:51:06 +00:00
66261e817a
* update copyright year.
...
* some machines(MC-R700 etc) have pre-vrc4172 asic.
they don's work as vrc4172 specification, so skip some probe sequence.
- add platid related parameter.
- add VRC4172PWM_BROKEN_PROBE code.
* add MC-R700,700A parameters (tested on MC-R700).
* add contrast parameters.(but no one use yet).
* turn some message in probing to VPRINTF().
* enlarge VRC2_PWM_N_BRIGHTNESS.
2001-02-27 08:48:38 +00:00
702b27ec2c
Back out change to print irq.
2001-02-27 07:34:15 +00:00
2184b08f72
Enable a fix so that PowerBook(FireWire) keyboards work. This
...
should also work on iBooks and PowerBook(WallStreet). And if
we're really lucky, on the new G4 laptops.
2001-02-27 07:33:17 +00:00
f209f0ea1a
Add Apple_FWDRIVER.
2001-02-27 06:16:06 +00:00
c09a88dca3
Be a bit more defensive.
2001-02-27 05:16:33 +00:00
22d63778fc
Add a gpio device to handle the gpio device & extint-gpio1
...
interrupt. (think ibook/powerbook)
2001-02-27 05:15:03 +00:00
25b977c685
print out irq on unconf devices.
2001-02-27 03:47:02 +00:00
38fb2a9227
Due to changes in ../sys/proc.h ``cpu_wait(p)'' is now a function due to the
...
prototype defined it in ... added it to arm/vm_machdep.c since all ARM machines
are still single processor anyway
2001-02-27 00:16:48 +00:00
0a4ef18ab8
add handling for the input channel selection/volume (no recording yet,
...
just the mixer interface)
2001-02-26 21:07:51 +00:00
f983a837ed
Add multiple-include protection, and include <machine/cpus.h> here (where
...
it was actually needed).
2001-02-26 16:40:00 +00:00
6584a7e79d
This file doesn't need <machine/cpus.h>.
2001-02-26 16:33:10 +00:00
9af33798b8
pack the structure to avoid aligning contraint problems with ELF compiler
2001-02-26 16:07:58 +00:00
19d69802f3
fix comment
2001-02-26 16:07:19 +00:00
5a5316cafe
Nothing in this file needs <sys/param.h>, so stop including it.
2001-02-26 16:04:22 +00:00
d666817eff
Remove unnecessary #include <machine/cpus.h>.
2001-02-26 15:59:54 +00:00
025d7c7815
use ENTRY_NOPROFILE and _C_LABEL, where appropriate.
2001-02-26 14:58:36 +00:00
a3ee43a4e6
Remove dump stuff that is now in powerpc_machdep.
2001-02-26 14:55:05 +00:00
51a131dac3
The cpu_local and cpu_cd elements of struct _cpu were utterly unused. Remove
...
them.
2001-02-26 14:52:11 +00:00
2ff5d800ab
Fix up indentation, and remove a spurious set of braces. Should be no
...
semantic change from the last revision.
2001-02-26 14:01:58 +00:00
03737e3e40
fpe-sp, and the associated "options FPE", was deleted in 1997. G/C references
...
to it.
2001-02-26 13:45:07 +00:00
66094acb2a
opt_cputypes.h is now provided by files.arm.
2001-02-26 13:26:14 +00:00
42127a3ffd
register vrc4172pwm driver for MC/R530 etc..
2001-02-26 09:34:22 +00:00
fb03c1ad33
DPRINTF/VPRINTF change.
2001-02-26 09:33:03 +00:00
bba3f2423b
add comment about $CPP
...
From source:
# XXX following definition is absolutely incorrect.
# Our cpp is not /usr/libexec/cpp but /usr/bin/cpp.
# True solution is:
# 1) copy /usr/bin/cpp into /usr/local/bin/sh-*-*-cpp
# 2) Edit CPP in sh-*-*-cpp correctly
# (e.g. "CPP=`$CC -print-prog-name=cpp`").
# 3) Edit STDINCDIR in sh-*-*-cpp correctly
# (e.g. STDINCDIR=/usr/local/sh-unknown-netbsdcoff/include)
# BROKEN
CPP=`$TARGET-gcc -print-prog-name=cpp`
# EXAMPLE
#CPP=/usr/local/bin/sh-unknown-netbsdcoff-cpp
#CPP=/usr/local/bin/sh-unknown-netbsdelf-cpp
2001-02-26 08:46:15 +00:00
6c4c53a461
add "MACHINE_CPU=sh3"
2001-02-26 08:24:20 +00:00
416614582a
More fill-in
2001-02-26 03:09:23 +00:00
fff9126df5
Add some of the common files.
2001-02-26 02:57:48 +00:00
ff7aabff92
Begin to flesh out the DNARD (aka Shark) port.
2001-02-26 02:49:24 +00:00
c6798f2107
add vers.c to CLEANFILES.
2001-02-26 01:42:51 +00:00
09f63bd785
Now that arm26 does __HAVE_MINIMAL_EMUL, switch it over to using
...
<arm/types.h>.
2001-02-26 00:19:57 +00:00
bb5b27eed9
Putting the param.h back into the arm32 resp. hpcarm include directories
2001-02-26 00:08:41 +00:00
7127877cf8
Putting param.h back into hpcarm's include
2001-02-26 00:07:54 +00:00
9f68c8b2b1
Putting param.h back to arm32 include directory
2001-02-26 00:06:45 +00:00
e4e4d358a0
Fixed IOMD remapping during boottime
2001-02-25 23:59:48 +00:00
e56f5ba174
__HAVE_MINIMAL_EMUL
2001-02-25 23:08:33 +00:00
9d22bf6fdf
Adapt for __HAVE_MINIMAL_EMUL world.
2001-02-25 23:07:51 +00:00
3fb058011a
Move arm32 ports over to using <arm/armreg.h>, so <cpu.h> mostly contains
...
NetBSD-specific definitions.
This also entails some changes to the way CPU identification is done. I hope
I've got it right.
2001-02-25 21:31:13 +00:00
af212d3fda
Use common switch / setfault / trampoline code. (except amigappc because
...
it doesn't use trap_subr.S either).
2001-02-25 20:34:24 +00:00
cd7c0ee5c4
Get the ofppc/prep/macppc/sandpoint/bebox to share the process switch
...
/ setfault / fork_trampoline code.
2001-02-25 20:21:53 +00:00
bc759e0d8d
check __LEADING_UNDERSCORE
2001-02-25 19:15:04 +00:00
bdc357ddfa
Guess a CPU ID for the ARM700 as well.
2001-02-25 19:10:28 +00:00
c7c73cbe90
The cpu_type element of struct _cpu was only used in identify_arm_cpu().
...
Make it a local variable.
2001-02-25 18:40:26 +00:00
846fe69958
Remove CPU_* options (they're in files.arm now -- for some reason I missed
...
this lot in the last commit).
2001-02-25 18:28:27 +00:00
9dcb8e583c
Add possible CPU ID for ARM7500 (based on arm/cpu.h).
...
Add macros to distinguish the three formats of CPU ID.
2001-02-25 17:49:34 +00:00
740551d1d1
Add PROG32 and PROG26 options.
...
These are intended to indicate what size of program space is in use, and hence
how to get at the PSR bits. They're currently set automatically by the CPU
type options.
2001-02-25 17:23:11 +00:00
1a53c63fd7
Finally implemented the moving VIDC chip; this solves the red colour too at startup
...
for RiscPC, A7000 and RC7500. A better solution should be made but is currently
unavailable for all the VIDC stuff isnt using bus_space at all...
2001-02-25 17:17:55 +00:00
716d92bdc2
COPY_SIGCODE is never referenced in the kernel, and the comment attached to it
...
is out of date. Assume it's obsolete and g/c it.
2001-02-25 17:04:54 +00:00
526ce203e7
check __LEADING_UNDERSCORE instead of __sh3__
2001-02-25 15:49:58 +00:00
64d5dfd570
Use MI md_root.c.
2001-02-25 15:45:23 +00:00
96b16f75a6
Hack to allow arm26 to have its own "cpu" device. This device should really
...
be shared between all ARM ports, but the arm32 one is too ugly for me to
touch it till I've got a test system running.
2001-02-25 15:33:33 +00:00
6f2aa0d0ba
Allow "cpu" to have children. In the long term, this may be the best way to
...
handle co-processors. In the short term, it's a necessary hack to get arm26
kernels to configure.
2001-02-25 15:31:39 +00:00
dc3c3a7bdd
re-add.
2001-02-25 14:56:47 +00:00
c4b3d490bb
delete (again), then add (again) ?
2001-02-25 14:56:01 +00:00
af19a7de64
try a `cvs ci -f' to make this appear on the trunk again. no changes.
2001-02-25 14:47:22 +00:00
8a32449594
Make sure root sector checksum is invalid if we clear it.
...
Set size of XGM partitions on auxilliary roots correctly.
From Leo Weppelman.
2001-02-25 14:33:19 +00:00
b2b6b2d9f7
Include <stdio.h> when built with -DDEBUG.
2001-02-25 14:32:59 +00:00
4a4d440928
Root sector checksums are not always valid, so ignore them.
...
From Leo Weppelman.
2001-02-25 14:32:20 +00:00
5c57e3ce2c
Make it easier to build with -DDEBUG.
2001-02-25 14:31:53 +00:00
7b88ea28ab
Remove unneeded COMPAT_HPUX stuff.
2001-02-25 13:33:54 +00:00
4cd9aa3b6c
Sync with x68k:
...
Use m68k_page_offset and m68k_trunc_page macros,
instead of using PGOFSET directly.
2001-02-25 13:28:31 +00:00
074b36937c
Make it compilable, syncing with the relocation of the platid stuff.
2001-02-25 12:58:36 +00:00
e7811ad9b6
Move cpu_sysct and dump{mag,lo,siz} & cpu_dumpconf to powerpc_machdep.c.
...
dumpsys is still port-specific for now. XXX dumpsys is still a stub
on all powerpc ports.
2001-02-24 22:39:16 +00:00
142f62c206
Moved the mainbus files to the arm/conf/file.arm from the arm32 and the
...
hpcarm/conf/files.hpcarm
2001-02-24 21:43:01 +00:00
7535275b7c
Fixed the `slow printing' bug that occured with debugged kernels on RiscPC's.
...
When the IOMD isnt mapped and all is mapped 1:1 a read gives garbage and thus
the obscure feature that slows down printing (or halts it!) when the mouse
button is pressed during output to the vidcconsole gets allways activated.
Included a simple flag that signals if the IOMD is mapped; the delay routine
won't check the mouse if this flag is still clear.
2001-02-24 21:29:38 +00:00
0cc08093fd
enable wscons.
2001-02-24 20:17:45 +00:00
e89d229692
Make hpcarm compile again after movement of mainbus code
2001-02-24 20:13:59 +00:00
1267afb3b6
Make lm audio for RiscPC compile again
2001-02-24 20:12:40 +00:00
b7b1d6b636
Make rc7500 compile again
2001-02-24 20:11:08 +00:00
78a1b11faf
Make arm32 RiscPC compile again
2001-02-24 20:08:53 +00:00
286f491040
Changed an innocent looking but pretty expensive table walking in pmap.c
...
from DIAGNOSTIC to PMAP_DEBUG
2001-02-24 20:04:42 +00:00
f4cdccec01
Jornada 690 keyboard driver (matrix switch connected SH3 PFC module)
2001-02-24 19:58:00 +00:00
0bb888c2e4
s/hpcmips/hpcsh/
2001-02-24 19:47:21 +00:00
f583057770
Repaired a syntax fault in the files.[hpcarm,arm32]
2001-02-24 19:43:50 +00:00
086a93939c
Part 2 of merge.... the dissapearance of mainbus from arm32 and hpcarm;
...
these parts were a 100% the same and i've included the extensions made by
hpcarm in the tree.
Checked for occurence of MD parts; none found.
2001-02-24 19:38:01 +00:00
85cffb544d
Improve legibility and iommu_dvmamap_sync().
2001-02-24 18:49:06 +00:00
ce7d8943e9
Use hardware address for saost.
2001-02-24 12:52:02 +00:00
735cec473d
Remove unneeded hardcoded IO mappings.
2001-02-24 12:48:58 +00:00
6fee490e68
Use working bus_space_map.
2001-02-24 12:43:52 +00:00
dfe9d2faf7
Implement bus_space_map().
2001-02-24 12:41:20 +00:00
9eeb0264fd
change com-speed to 19200.
...
default com-speed of hpcboot are 19200
2001-02-24 11:08:31 +00:00
f46f7e3e62
Make hpcarm kernel compile again.
2001-02-24 09:58:43 +00:00
d3ce44c170
some include files added newly write into Makefile.
2001-02-24 07:24:36 +00:00
ba1664c1f3
add profile.h,profileio.h
2001-02-24 07:16:51 +00:00
b84bcefc8e
i forgot writing some include files in Makefile
2001-02-24 07:09:20 +00:00
45f666cb9d
Remove setregs since it now lives in powerpc/powerpc/powerpc_machdep.c
2001-02-24 04:35:33 +00:00
aba3f2655a
Add powerpc/powerpc/powerpc_machdep.c
2001-02-24 04:30:42 +00:00
559cea4b1c
Since setregs is common among all the powerpc ports,
...
make a common version and put it in powerpc_machdep.c
2001-02-24 04:29:26 +00:00
3aeb5f2f29
whitespace police
2001-02-24 01:59:46 +00:00
acec2828d9
whitespace police
2001-02-24 01:34:28 +00:00
e7db94d39f
if we panic to a bad/illegal irq, at include the invalid irq value in
...
the panic message.
2001-02-23 23:07:15 +00:00
6b7ad3aa3e
__HAVE_NWSCONS and __HAVE_DEVICE_REGISTER are MACHINE-dependent.
2001-02-23 22:02:43 +00:00
92493b7a32
Missed this file in the merge due to a typo !
2001-02-23 21:27:46 +00:00
c1f753f9b4
Big patch for merging common include files of the new hpcarm tree and the old arm32
...
tree into the new arm substree. All moved files are relinked with a stub that included
the file from the new location; this might be done better later.
2001-02-23 21:23:45 +00:00
b81de58f77
I forgot to move Makefile.
2001-02-23 14:08:54 +00:00
4934987175
Make sure to have sfbp.h and add sfbp* line in TCWSCONS left #ed-out.
...
Pointed by Matthew Jacob <mjacob@feral.com>.
2001-02-23 07:21:41 +00:00
5137cda306
delete local-ID for cvs
2001-02-23 04:31:18 +00:00
c98cd6c023
hpcarm:
...
kernel for StrongARM-based WinCE PDA machine.
2001-02-23 03:48:06 +00:00
090dc051cf
Reduce the amount of memory allocated for assembler fragments.
...
Excise unnecessary instructions from kernel launch code.
Increase HIMEM on >8Mb machines, since the last two changes didn't free
enough memory to boot with 16Mb.
2001-02-23 00:27:40 +00:00
121d97c255
Somehow this didn't get checked in with the rest of the SVR4 64-bit fixes.
2001-02-22 22:08:06 +00:00
659f65e0ee
hpc common files are moved to dev/hpc.
2001-02-22 18:37:54 +00:00
f4b23a11a4
fix a check code whether mkbs is console or not
2001-02-22 15:34:28 +00:00
062c4f6e22
Add code segment for PMAGD, which is under development this moment.
2001-02-22 07:46:01 +00:00
a95226826d
switch sun3 to ELF. highlight include:
...
add "%" prefix to register names in assembly code.
change assembly functions to return values in %a0 instead of %d0.
C symbols no longer prepend an underscore, adjust assembly code for this.
32-bit values are now 32-bit aligned instead of 16-bit aligned,
adjust structure packing and padding to override this where necessary.
make EXEC_ELF std, make EXEC_AOUT and COMPAT_AOUT_M68K optional.
use the MI loadfile() instead of several home-grown versions.
2001-02-22 07:11:08 +00:00
a1602a24ec
don't assume that all the arguments to ctags will fit on one command line
...
(as is the case with a longer SYSDIR)
2001-02-22 04:40:43 +00:00
a72ee87980
Add support for 64-bit SVR4 (Solaris 8) binaries.
2001-02-21 23:53:00 +00:00
f6d22f21da
usr1handler(): fix the logerror() call, use string 'shut'
2001-02-21 22:55:51 +00:00
efd32026ab
make default_consinfo and kgdb_devname[] const
2001-02-21 22:52:03 +00:00
522f569810
make some more constant arrays 'const'
2001-02-21 21:39:52 +00:00
352dfb6c36
Update to support VFP formats. Also a half-hearted attempt at armeb support.
...
Note that I'm using __VFP_FP__ to indicate compilation with VFP-format
floating-point data. There doesn't (currently) seem to be a standard define
for this purpose. __VFP_FP__ was suggested by Richard Earnshaw.
2001-02-21 17:43:50 +00:00
887895c344
Add CPU_ID_CPU_MASK. Different, but (I hope) more useful definition than
...
arm32 currently uses.
2001-02-21 17:41:58 +00:00
e0a4623854
move disksubr.c define to machine-port.
2001-02-21 16:42:04 +00:00
8b060aaf64
hpc* common disksubr.c
2001-02-21 16:34:00 +00:00
3cfa37d7da
HD64461 support.
2001-02-21 16:28:02 +00:00
df98929e3b
more diagnostic message. (SH3)
...
add framebuffer information (ARM)
fix boot parameter bug. (-b=sd0)
2001-02-21 16:01:52 +00:00
df5e8f68d8
HD64461 driver (SH3 companion chip for Windows CE)
2001-02-21 15:39:09 +00:00
bedd081460
add HP Jornada 720, Compaq iPAQ H3600 entry.
2001-02-21 15:04:40 +00:00
8ce0133cc8
add SH7709/SH7709A I/O port register define
2001-02-21 14:49:53 +00:00
b675f941fe
Use m68k_page_offset and m68k_trunc_page macros,
...
instead of using PGOFSET directly.
2001-02-21 12:39:16 +00:00
581542f31f
Return microtime of zero if not available at early stages of device
...
autoconfiguration.
2001-02-21 09:46:54 +00:00
935036cf94
Remove superfluous #include added in previous commit
2001-02-21 09:20:56 +00:00
8e130c9227
Document KGDB options
2001-02-21 09:14:33 +00:00
85f0f12a55
Changes for KGDB
2001-02-21 09:12:14 +00:00
07bb8e7a23
Call KGDB hook function
2001-02-21 09:10:42 +00:00
6d8f58da18
Add zs_kgdb.c driver
2001-02-21 09:09:54 +00:00
8a5e278439
Glue functions for KGDB support
2001-02-21 09:08:35 +00:00
943f21e2c5
Remove some redundant decls.
...
Fix some nested decls.
2001-02-21 05:53:35 +00:00
daa78d567e
Make this compile again.
2001-02-21 05:44:32 +00:00
044409a035
reduce PAGER_MAP_SIZE to 4MB, we're short on KVA.
2001-02-21 02:43:02 +00:00
573fd4fa4d
Make sure to have rnd pseudo device.
2001-02-21 01:44:44 +00:00
ed2535fabd
Changing rc7500 for naming change of vidcvideo to vidcconsole
2001-02-21 00:55:34 +00:00
926ac33ffb
Add newly renamed file for transition to new naming
...
vidcrender.c is old vidcconsole.c
vidcconsole.c is old vidcvideo.c
2001-02-21 00:53:36 +00:00
37eca554a2
vidcvideo rename phase 2 : getting it to build again; tested ok
2001-02-21 00:51:26 +00:00
c2bdafab79
use getprogname()
2001-02-20 23:51:59 +00:00
23d7dbe67e
Updated documentation about the bootloader
2001-02-20 22:58:34 +00:00
f1d3c5daa6
Renamed vidcvideo configure option to vidcconsole wich covers the function
...
better and allows to clean up vidc tree by enabling the use of the term
vidcvideo for what it is : configuring video independent of choise of console
to allow implementation of wscons for RiscPC/A7000 and RC7500.
2001-02-20 22:49:55 +00:00
f0d6660cf4
Filename cleanup: remove i4b_ prefixes outside sys/netisdn, last round.
...
Renamed in sys/dev/ic:
i4b_hscx.c -> hscx.c
i4b_hscx.h -> hscx.h
i4b_ipac.h -> ipac.h
i4b_isac.c -> isac.c
i4b_isac.h -> isac.h
i4b_isic.c -> isic.c
i4b_isicbchan.c -> isic_bchan.c
i4b_isicl1.c -> isic_l1.c
i4b_isicl1.h -> isic_l1.h
i4b_isicl1fsm.c -> isic_l1fsm.c
2001-02-20 22:24:31 +00:00
fcc944a0c5
Clean up messages, and replace nested ifs by switch statement.
2001-02-20 21:55:00 +00:00
013971b69b
include sunos_exec.h to declare emul_sunos.
...
From syssrc/sys/arch/news68k/news68k/trap.c:1.12.
2001-02-20 15:55:08 +00:00
0e8197960f
Remove phys_map declaration, which is in <uvm/uvm_extern.h>.
...
From syssrc/sys/arch/news68k/news68k/vm_machdep.c:1.6.
2001-02-20 15:54:29 +00:00
a7d2590bf0
Fix some nested extern declarations.
...
From syssrc/sys/arch/news68k/news68k/machdep.c:1.16.
2001-02-20 15:53:27 +00:00
968d0f81c6
Adjust only avail_end address rather than reduce
...
the last bank size of avail_mem[] so that all RAM area
will be dumped in dumpsys().
2001-02-20 12:52:57 +00:00
7d1d4a2f4d
New, interrupt-driven implementation.
2001-02-20 00:04:40 +00:00
143a120848
Added GDROM interrupt support at IRQ9 (need to clean this up...)
2001-02-20 00:03:53 +00:00
8a986b2e96
convert to use getprogname()
2001-02-19 22:48:57 +00:00
037484799a
PAL support...
2001-02-19 21:37:31 +00:00
c090c1cfe5
temporary fix a serious pmap problem with dummy PMAP_{MAP,UNMAP}_POOLPAGE().
...
To fix correctly, set IOM_RAM_BEGIN with P0 addr instead of P1 addr and
fix machdep.c and pmap.c.
2001-02-19 17:51:22 +00:00
68eaed4e53
Extended monitor file definition for AKF 85 (Phillips Brilliance 17'')
...
Some extra modes added and changed some mode definitions to better suit
my monitor.
2001-02-19 16:46:42 +00:00
d03f5eac72
Some of this code is based on an old version of BBBB -- update the copyright
...
message to indicate this.
2001-02-19 15:54:16 +00:00
73254cd1f4
Import of newest version ... checked for correct importing now ....
...
The import script needs some sophistication but its ok now...
2001-02-19 15:28:13 +00:00
64ceee1d67
Fixed CVS directory overwriting by deleting it in the copy first; this to
...
prevent import trouble due to messed up CVS directories.
2001-02-19 14:32:45 +00:00
0a46ddf1e2
Changed export script so it doesn't kill the CVS directory :)
2001-02-19 14:26:41 +00:00
e263b21061
Another bug ... the extract archive wasnt build in the correct directory
2001-02-19 14:18:24 +00:00
f3b8ca18f1
Fixed a small bug in the export script
2001-02-19 14:15:42 +00:00
0085973034
Import of the new RISCOS bootloader in the CVS tree with import and export scripts.
...
Start version is v 0.91
2001-02-19 14:09:00 +00:00
d7fca27e58
Garbage-collect vestigial support for the Simtec Hydra board. The main code
...
to support it was never committed to the tree, and it would probably need
major reworking anyway.
2001-02-19 13:29:39 +00:00
504ce207cb
Make the kenrel base address a variable.
2001-02-19 13:26:17 +00:00
106522ed47
Add -f option. If used it will perform the low level block operations on the
...
file rather than requiring a raw device. Useful when dealing with vnd's
images and building snapshots. Also allows snapshots to be built in
securelevel > 0.
2001-02-19 06:23:55 +00:00
d669e1cea8
Fix tyop.
2001-02-18 22:32:32 +00:00
c5030d24f4
rename round() to fpu_round() to avoid a name conflict with
...
the "round" assembly function in FPSP when building with ELF.
2001-02-18 20:05:58 +00:00
7880a89379
Initial version of interupt handling, by Adam Ciarcinski.
2001-02-18 19:08:15 +00:00
195dd4efe6
Make the machine halt when halted and reboot when rebooted.
...
From Shinmyoh Koji (yesu@rb3.so-net.ne.jp ).
2001-02-18 16:56:22 +00:00
5fa30a864f
fixed naming bug :( ... I should be more carefull
2001-02-18 12:42:31 +00:00
7665787d5e
Fix to solve PR arm32/9208 "RiscPC reboot hangs"
...
Due to the StrongARM support code in the cpu_reset() MC-function,
an instruction was executed to drain the write back buffer on StrongARM
processors (might even be armv4+).
Since ARM{6,7} don't recognize this instruction they will either except
for an illegal instruction on this or have undefined behaviour resulting
in an endless illegal instruction/data abort/reset behaviour.
The fix contains a flag that signals if the WB flush should be executed
or not for the detected processor.
2001-02-18 12:21:02 +00:00
aa13a12702
Support to control the leds on VAXstations, taken from Sun3 and ported
...
to vax by Shinmyoh Koji (yesu@rb3.so-net.ne.jp ).
2001-02-18 10:44:20 +00:00
5a0f904718
cosmetics (white space etc.)
2001-02-18 06:51:18 +00:00
e3180dc477
Enable options NFS_V2_ONLY and VNODE_OP_NOINLINE.
2001-02-18 05:24:43 +00:00
ab4ef9dcf6
Add devsw entries for "ld" (logical disks).
2001-02-18 04:55:37 +00:00
9dd76bf15d
Updated the bootloader for RiscPC/A7000/NCs etc. remains compatible with the old bootloader by an COMPAT_OLD_BOOTLOADER option
2001-02-18 00:59:33 +00:00
3043022c3a
Added extra kernel vm by moving up vidc space
2001-02-18 00:56:42 +00:00
a598ade96e
Updated MAGIC number for new bootloader
2001-02-18 00:55:31 +00:00
00b4361e08
Add compatibility option for old bootloader
2001-02-18 00:54:02 +00:00
ab20625e49
Lint doesn't like zero-sized structs.
2001-02-17 20:07:01 +00:00
3dbffcc29f
Move the RAM base address of the kernel into a variable.
...
Set CPPFLAGSm CWARNFLAGS and STRIPFLAGS to the same as arm32 uses.
2001-02-17 19:38:36 +00:00
503e69a88a
Don't define pmaphistbuf unless UVMHIST is defined.
2001-02-17 19:09:51 +00:00
33c7eb2382
Add necessary DDB includes.
2001-02-17 19:08:21 +00:00
4acea3a8cc
Don't do arithmetic on void *s.
2001-02-17 19:04:36 +00:00
2e041e883b
Correct return type of arcvideo_show_screen().
2001-02-17 18:45:19 +00:00
b211962232
Include <machine/machdep.h> for update_memc().
2001-02-17 18:43:13 +00:00
575fa5e5af
#ifdef out arckbd_pick_layout until we get round to using it again.
2001-02-17 18:39:11 +00:00
47ac3d6b45
include sunos_exec.h to declare emul_sunos.
2001-02-17 18:34:57 +00:00
69e6648be8
Remove phys_map declaration, which is in <uvm/uvm_extern.h>
2001-02-17 18:29:55 +00:00
f5d8c46be6
Remove unused fb stuff.
2001-02-17 18:21:03 +00:00
96c8c181ee
Fix some nested extern declarations.
2001-02-17 18:15:18 +00:00
1bbd89c7a7
white space nits.
2001-02-17 18:02:40 +00:00
a72248beab
Reduce unnecessary differences between this and Makefile.arm32.
...
Also (more significantly), use the compiler's default -mcpu setting. This
means I can now build APCS-32 kernels. They work, too.
2001-02-17 17:23:48 +00:00
5713cce1e0
sync with reality.
2001-02-17 16:29:13 +00:00
32a800e5c0
Install <arm/endian_machdep.h>.
2001-02-17 14:57:08 +00:00
8b601afaf3
Re-introduce <arm/endian_machdep.h>, this time using GCC's idea of the target
...
endianness.
2001-02-17 14:55:44 +00:00
enami