thorpej
97c6a307e3
Where _is_ that brick when you need it?!
1997-05-24 03:45:40 +00:00
augustss
72b5ba3901
Redo the way selecting the mode for SB cards is done completely.
...
It is now table driven since there are so many different variations
of SB cards out there.
Also fix a bug that stopped SB2 and SBPro from working.
1997-05-23 21:19:59 +00:00
augustss
c612a6fca7
Check that setting IRQ and DRQ on SB16 actually succeeds.
1997-05-23 09:45:40 +00:00
augustss
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
augustss
0db08d11e6
Redo the SB mixer code. The driver can now distinguish between the
...
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
thorpej
50a39a3334
Add NetBSD RCS IDs.
1997-05-18 06:08:02 +00:00
augustss
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
augustss
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
pk
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
pk
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
augustss
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
augustss
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
jtk
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
jtk
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
augustss
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
augustss
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
mikel
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
marc
8f6ec1a681
wds_find has the sense of its return value backwards (0 vs 1). This
...
caused the probe to succeed when there was no device present.
1997-05-01 20:10:57 +00:00
augustss
2fb1d088c5
XXX Pretend that all SB cards are of model 1.
...
XXX This way you can at least use SB cards until the real fixes go in.
1997-04-30 02:08:12 +00:00
augustss
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
mycroft
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
mycroft
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
mjacob
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
veego
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
mycroft
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
mycroft
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
cgd
5cfcabc2fe
compile when __BROKEN_INDIRECT_CONFIG isn't defined.
1997-04-18 00:50:33 +00:00
mycroft
f2746e9620
Update for new com driver.
1997-04-09 16:44:21 +00:00
jtk
73cfcd9f66
fix compile error if AUDIO_DEBUG
1997-04-06 17:21:45 +00:00
augustss
7dcb9bed4c
Make sure the bus tag is set where we need it.
1997-04-06 00:54:22 +00:00
augustss
29e9c34ad3
Add RCS id.
1997-04-06 00:35:19 +00:00
augustss
0a999294f5
Add support for MAD16 based audio cards.
...
XXX Change the way we determine to probe for it when
multiple I/O ranges are available.
1997-04-06 00:33:07 +00:00
augustss
7dedd37033
Busify the WSS driver.
1997-04-05 23:50:23 +00:00
mycroft
9448a01404
New version of com driver. Uses a different queueing mechanism and a split
...
hardware/software interrupt mechanism for improved performance. Many odd
protocols bugs also fixed.
1997-04-04 20:56:34 +00:00
mycroft
232ade1b2b
comdefaultrate -> comconsrate
...
comconsbah -> comconsioh
Only use comconsrate on the console.
1997-04-04 20:49:49 +00:00
christos
ef8d40a999
Busify the driver (from perry).
1997-04-04 18:59:35 +00:00
mycroft
4df7e1dac7
Remove superfluous probe message.
1997-04-02 03:58:25 +00:00
jonathan
c1f72bba37
Add ifmedia hooks: include <ifmedia.h> and add sc_media to softc.
1997-03-30 22:47:05 +00:00
jtk
dd46e6280e
partial fix for PR 3385: correctly identify JAZZ-16 when AUDIO_DEBUG is
...
enabled
1997-03-29 05:41:28 +00:00
mycroft
11117540d2
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-29 02:32:30 +00:00
mycroft
056fd71e85
General cleanup: bus.h, etc.
1997-03-29 02:11:09 +00:00
mycroft
080350dc0d
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-28 23:47:08 +00:00
mikel
eba3c11c27
some cleanup; still needs a *lot* of work
1997-03-25 07:57:14 +00:00
jtk
983d7a8c15
use new name sc_drq8 and initialize sc_drq16 (reflect changes to SB driver)
1997-03-24 05:30:28 +00:00
mycroft
188dec4d19
Clean up a bit, and export isa_dmamask() and isa_dmaunmask() interfaces.
1997-03-21 02:17:11 +00:00
mycroft
3523bc35d5
Add an isa_dmacount() function, to get the current residual count on a channel.
1997-03-21 00:00:21 +00:00
mycroft
6f51eb5c3d
Use autoinitialize DMA mode on the SB2 and later. Partly from Torsten Duwe.
1997-03-20 21:42:11 +00:00
mycroft
b89990fba6
Oops; fix pasto.
1997-03-20 20:18:40 +00:00
mycroft
4f9648674a
Make sure we round the block size to a multiple of the sample size.
1997-03-20 20:15:24 +00:00
mycroft
e0b3534b6c
Remove bogus block rounding code. If the application sets a
...
block size explicitly, it had better know what it's doing. From
PR 2587, by Robert Baron.
1997-03-20 16:04:22 +00:00
mycroft
a2f33a43c2
Turn off a debugging printf().
1997-03-20 11:04:51 +00:00
mycroft
95abb133dc
Add 16-bit DRQ support on PnP, and enable 16-bit output.
1997-03-20 11:03:10 +00:00
mycroft
c1cc14fa25
Combine set_encoding and set_precision into a single set_format interface.
1997-03-20 06:48:48 +00:00
mycroft
de69173e77
Fix oversights in previous.
1997-03-20 03:56:11 +00:00
mycroft
a283cb636c
Check for errors returned by AD1848 routines.
1997-03-19 19:54:44 +00:00
mycroft
2b72395bfc
ad1848_commit_settings(): Don't set the speed/format register if the
...
parameters haven't changed. From PR 3360, by Jason Baker.
Also, clean up several overly-complex interfaces.
1997-03-19 19:31:15 +00:00
mikel
eb7e30aa3d
normalize off-by-four ad1848 register offsets.
...
also silence probe unless debugging is enabled.
1997-03-19 06:47:37 +00:00
mikel
80a8a81608
normalize off-by-four ad1848 register offsets.
1997-03-19 06:45:21 +00:00
thorpej
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
is
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
mikel
8147d1718f
fix various AD1848/PSS misfeatures; from Jason Baker in PR kern/2045.
...
also did some misc cleanup of my own.
1997-03-13 08:34:49 +00:00
mycroft
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
mikel
d9b86972c1
SB minor version number is always two digits
1997-03-12 07:06:19 +00:00
mikel
1186720517
eliminate leftover header from bt -> bha conversion; noted by Enami
...
Tsusgutomo in PR kern/3310.
1997-03-11 04:24:03 +00:00
christos
700cbbae46
Fix bug introduced in the conversion to bus_*(). Don't always say that
...
we are a JASS16. From enami tsugutomo.
1997-03-03 21:40:01 +00:00
jonathan
c7cec27edf
Move if_ep media-sense code from front ends to inside back end,
...
to prepare for if_media, and to support EISA 3c59x cards:
* change epconfig() to take a short that encodes the chipset
type (3c509, or Demon/Vortex/Boomerang).
* add distinct 3c509 and Demon/Vortex/Boomerang media-sense
functions to back end.
* Add EISA match/attach support for the 3c592 and 3c597
(Demon) cards as well as the 3c509-comatibl EISA 3c509/3c579.
* Assume that ISA and ISA PnP cards are 3c509-style, until
proof to the contrary (e.g. large packet support).
Tested on 3c595, 3c590, and 3c509b. Not tested on 3c515 or Demon.
1997-02-18 10:51:06 +00:00
thorpej
2953a0ce90
Pass the i/o handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>,
in PR #3216 .
1997-02-12 23:37:38 +00:00
thorpej
dfa1224fab
Oops, pass the memory handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>, in
PR #3216 .
1997-02-12 23:36:04 +00:00
mycroft
1dd1504980
Move the aha ISA probe functions into a separate file.
1997-02-07 17:37:27 +00:00
cgd
f89ffa1fe4
don't clobber IER in cominit(). (suggested by mycroft.)
1997-01-30 19:42:33 +00:00
cgd
3573080902
split isasearch (!__BROKEN_INDIRECT_CONFIG) completely off of
...
isascan (__BROKEN_INDIRECT_CONFIG), and attempt multiple match/attach
of cloning devices in isasearch(). (If a match/attach succeeds for
a cloning device, try it again.)
1997-01-26 03:49:28 +00:00
perry
8852c180ef
Fixes to wd driver from cgd -- corrects several nasty bugs typically
...
associated with coming out of suspends/sleeps on laptops.
Approved by fvdl.
1997-01-17 20:45:29 +00:00
christos
e6717c0bc9
- convert to bus_space_*
...
- split attachment code to sb_isa.c
1997-01-16 21:03:30 +00:00
mikel
fe9f1f4e3e
add missing copyright and RCS ID; ok'd by mycroft
1997-01-15 07:06:42 +00:00
mycroft
be33336052
If attaching the console, reinitialize it immediately.
1996-12-14 10:46:38 +00:00
mycroft
58e4442168
Turn off the baud rate changing optimization.
1996-12-14 08:56:23 +00:00
thorpej
d502e68402
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
cgd
74187419b6
The last change fixed a last-minute goof in the __BROKEN_INDIRECT_CONFIG
...
case, but added a typo (extra parenthesis) in the !__BROKEN_INDIRECT_CONFIG
case. fix it.
1996-12-08 00:14:03 +00:00
cgd
243ef518d2
fix a (fatal) bug in the __BROKEN_INDIRECT_CONFIG changes checked
...
in yesterday. (got a little bit careless with #ifdef'd variables.)
1996-12-05 22:16:04 +00:00
mikel
179a058e17
fix AUTO_CAL_ENABLE bug, & misc. cleanup.
1996-12-05 07:01:30 +00:00
mikel
94909aee07
return proper output port. Fixes PR kern/2014.
1996-12-05 06:48:47 +00:00
thorpej
3ec2c5af68
Duh, make sure i/o tags and handles are initialized before actually
...
probing for the LANCE chip.
1996-12-05 02:39:37 +00:00
cgd
197d80c63a
update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
...
is defined.
1996-12-05 01:25:23 +00:00
thorpej
c164cadf68
Convert to use <machine/bus.h>
1996-12-02 05:44:17 +00:00
thorpej
3b4e2a1ac9
In wdattach(), when printing out info about the drive, make the output
...
look a little more like a SCSI disk's. This has the pleasant side-effect
of preventing the output from annoyingly extending past 80 columns.
1996-11-27 10:50:39 +00:00
cgd
d7c58f547e
Drop LPT_NPORTS to 4 from 8. Some lpt units require only 4 I/O ports
...
(e.g. from 0x3bc to 0x3bf, for example). Others may require more,
but until there's some special handling for them, 4 should be returned
so that on systems with I/O port accounting, the unit at 0x3bf can be
properly mapped, etc. (OK'd by mycroft.)
1996-11-23 23:22:50 +00:00
cgd
452ba6e098
restrict the FSTATE_STAR prohibition (and panic) to the i386 only. Cloning
...
devices actually do make sense on indirect-config busses, because you
might be able to have more than one of the busses! In addition, they're
useful because they don't require unit numbers to be wired down, so you
could e.g. have vga* at indirect? and vga* at direct?, and have the first
one found be unit number zero. Finally, devices which can divine their
own ports numbers, etc., actually should be cloning, even if you know you'll
only have one bus that they can live on.
1996-11-23 21:36:44 +00:00
mikel
bcc644fd7e
Add missing arguments to NIC_GET in debug code. Fixes kern/2875.
1996-11-17 04:11:18 +00:00
jonathan
40bd2b1104
Fix front-ends of split uha driver to compile when DDB is not configured:
...
Propagate Debugger() macro from uha.c to uha_{eisa,isa}.c.
update file names accordingly.
1996-11-15 22:53:36 +00:00
cgd
b005a8ee10
move cominit() prototype to comvar.h, so that ports which use 'com'
...
for serial console, but don't use the (i386-specific)
comcninit()/comcnprobe() functions, can do the right thing.
1996-11-13 19:41:35 +00:00
mikel
457c188626
Use device struct from sbdsp_softc, eliminate redundant softc members.
...
Fixes PR kern/2237.
1996-11-12 07:39:56 +00:00
mikel
af29f79ed4
Fix WDDEBUG code; PR kern/1480.
1996-11-07 05:23:07 +00:00
mikel
53945ccb19
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:20:32 +00:00
mikel
697941357c
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:17:23 +00:00
mycroft
24620e1cd0
Rearrange wds_attach() to initialize DMA channel before setting to cascade
...
mode.
Fix silly error in -ASC case, pointed out by Niklas Hallqvist.
1996-11-03 16:20:31 +00:00
fvdl
f577ebda70
Move 'not finished' printf within AUDIO_DEBUG ifdefs, it should normally
...
be silent about this and caused confusion with stray interrupts.
1996-10-25 07:25:48 +00:00
cgd
233251d896
add missing argument to bus_space_map in ESP code
1996-10-22 00:45:25 +00:00
thorpej
769a499800
New bus.h implementation/interface:
...
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
1996-10-21 22:34:38 +00:00
thorpej
0211a3232d
Appease the compiler: get rid of some unused variables, add some
...
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess. Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
thorpej
35b8c6aa4c
Add some prototypes, clean up some unused variables, and misc. other
...
compiler warning cleanup.
1996-10-17 04:21:55 +00:00
jtk
bfe653fbd7
fix PR 2851: make it compile under -Wformat
1996-10-16 11:32:45 +00:00
jtk
aa8449a9ef
fix compile errors & warnings
1996-10-16 01:12:18 +00:00
christos
86373f8cf9
backout kprintf changes
1996-10-13 01:37:04 +00:00
christos
58953408cb
printf -> kprintf, sprintf -> ksprintf
1996-10-10 22:04:48 +00:00
christos
e51a0f737a
- printf -> kprintf, sprintf -> ksprintf
...
- fix unused variable warning
- include <systm.h>
1996-10-10 21:27:25 +00:00
christos
ce31bd3eb6
- printf -> kprintf, sprintf -> ksprintf
...
- Remove unused variable
- include <systm.h>
1996-10-10 21:26:04 +00:00
christos
18f1d603f0
- printf to kprintf, sprintf -> ksprintf
1996-10-10 21:25:07 +00:00
christos
764db9b35b
- printf -> kprintf, sprintf -> ksprintf
...
- provide a default case to handle an unknown model number.
- include <systm.h>
- remove unused variable.
1996-10-10 21:23:28 +00:00
christos
245e10b406
- printf -> kprintf, sprintf -> ksprintf
...
- ifdef an unused variable.
1996-10-10 21:21:52 +00:00
christos
ee2c8600ee
- printf -> kprintf, sprintf -> ksprintf
...
- remove kvtop declaration.
1996-10-10 20:04:03 +00:00
chuck
b10785c0e4
fix "control reaches end of non-void function" in check_eh() for -Werror.
1996-10-06 21:24:36 +00:00
mycroft
767522373b
If we get a RXRDY interrupt, but RXRDY is not set in the LSR, briefly set IER
...
to 0. This fixes a condition where some UARTs send an infinite stream of
RXRDY interrupts.
1996-10-06 01:52:26 +00:00
mycroft
d1f08e3e87
Serial console changes:
...
* Enable FIFO with trigger level 1.
* Set DTR and RTS so terminals are happy.
1996-10-06 01:46:04 +00:00
explorer
870052156e
Better error message when the card is found but shared memory isn't enabled
1996-10-04 01:28:54 +00:00
thorpej
e1b380e139
Fix a bus mem space leak; always unmap the card, regardless of the success
...
of cy_find().
1996-09-26 19:24:04 +00:00
thorpej
63b18ee2f2
This file is now obsolete.
1996-09-25 20:44:09 +00:00
christos
5d34f1a62b
New cyclades driver from Timo Rossi
1996-09-24 17:45:14 +00:00
mycroft
67417a473a
Use bus.h.
1996-09-07 12:12:18 +00:00
mycroft
94bfaac456
Wrap the definitions of CONADDR and CONUNIT in #ifndef.
1996-09-06 05:06:01 +00:00
mycroft
82f0b829e8
compoll() -> comsoft()
1996-09-05 16:42:32 +00:00
mycroft
8427290044
wtpoll() -> wtsoft()
1996-09-05 15:37:18 +00:00
mycroft
110ee78a6f
Remove cyselect().
1996-09-05 15:35:09 +00:00
mycroft
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
mycroft
70944d2e2c
Minor changes.
1996-09-01 00:20:20 +00:00
mycroft
e8b5bd5b35
Update.
1996-09-01 00:10:55 +00:00
mycroft
44bb2d98e1
Split the UltraStor driver apart.
1996-08-31 20:26:48 +00:00
mycroft
06fdef11fd
Split the BusLogic driver apart, and rename it to `bha (like BSDi).
1996-08-31 20:18:24 +00:00
thorpej
164af20154
Add a missing "int" in a function declaration.
1996-08-30 01:40:35 +00:00
cgd
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
cgd
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
thorpej
eea135a8b9
Two changes:
...
- Convert to use <machine/bus.h>.
- Also read station address in egattach(). The softc is no
longer required in the probe function.
1996-08-03 19:33:19 +00:00
thorpej
a47a8c3f8c
Oops, missed a couple of inb()s..
1996-08-03 02:23:57 +00:00
thorpej
c937985d60
Convert to use <machine/bus.h>, plus 2 bug fixes:
...
- In egstart(), if the Send Packet command fails, m_freem()
the mbuf chain before dequeueing another one (memory leak).
- In egintr(), return 1 if a known interrupt was processed.
Would manifest itself as spurious interrupts.
1996-08-03 02:12:46 +00:00
is
003947b965
Changed the driver to use bus_xxx().
1996-07-25 18:59:12 +00:00
cgd
bc2f07f331
move DDB-only label inside an #ifdef, so that -Wall works
1996-07-10 18:14:04 +00:00
thorpej
794614df64
In the 3c503 probe, map the correct number of ports. (Unmap already
...
unmapped the correct number of ports, thus causing the ISA io port
extent map to get corrupted.)
1996-06-25 20:47:02 +00:00
mycroft
a8e5b5ba47
Remove some unneeded FIFO flushes and reorder some register changes per the
...
6360 manual. Turn off synchronous negotiation.
1996-06-18 16:13:05 +00:00
mycroft
202bd8b9ae
Turn off *DIAG by default.
1996-06-18 12:55:00 +00:00
cgd
08d585e924
add tty_attach() where appropriate.
1996-05-30 18:24:09 +00:00
is
4e8dbf468a
Added flags to the iy driver to override the media autodetect mechanism, if
...
necessary. Added a manpage to document the flags.
1996-05-22 15:39:43 +00:00
mycroft
19b0b9502f
New version, with changes from Justin Gibbs and Noriyuki Soda.
1996-05-16 03:44:13 +00:00
thorpej
52e2ab70b0
#include <machine/intr.h> to get IST_* definitions.
1996-05-14 00:31:04 +00:00
mycroft
cec36bf8d5
Use intr.h.
1996-05-12 23:51:23 +00:00
thorpej
f004654691
Update Herb's e-mail address; beer.org feels a lot more friendly.
1996-05-10 05:27:53 +00:00
thorpej
e32158478e
Correct a couple of comments ... port 0x84 produces a 1.25us delay when
...
read, not 2.5us. (I must have been confused; thanks Charles, for
correcting me.)
1996-05-08 23:32:31 +00:00
thorpej
1040e97175
If accessing shared memory on a 16-bit card, be careful not to do any
...
8-bit memory access; some cards, notably some WD/SMC cards, can't handle
8-bit access if 16-bit access has been enabled.
1996-05-08 22:09:18 +00:00
is
817e0b8d97
Fix a typo.
1996-05-08 17:29:40 +00:00
thorpej
15354e899c
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:55:13 +00:00
thorpej
7b3f25271d
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Break up ISA LANCE driver into ISA and PCI front-ends.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:50:04 +00:00
is
95f41d24cc
Add "iy" driver for Ethernet ISA boards using the Intel i82595 chip, e.g.
...
(and only tested on) Intel Etherexpress PRO. Should work on any i82595 ISA
board which uses an EEPROM for config information; NETBLKID not yet supported.
TODO: change to BUS interface, add multicast support.
1996-05-06 21:36:51 +00:00
christos
d53d6cd545
Move comintr() prototype to comvar.h; needed by the multi-port cards.
1996-05-05 19:50:44 +00:00
christos
d21e608c6b
Make those compile again; they were missing a declaration for bc.
...
Also fix prototypes.
1996-05-05 19:49:51 +00:00
thorpej
0bc154b367
Fix a bug I introduced when converting the driver to <machine/bus.h>.
...
Use the i/o handle for the `delay port' exported from the parent
ISA bus, rather than the totally bogus combination of [ioh, 0x84].
Also, fix a bug apparently introduced when the -Wall changes were checked
in which, under most circumstances, would cause a 16-bit WD8013EP to
be mis-identified as an 8-bit WD8003EP.
1996-05-05 01:28:52 +00:00
thorpej
6fb58044fd
Map port 0x84 (which is used to generate a 2.6us delay) in isaattach().
...
Since this port is needed by at least a few drivers, export its i/o handle
via isa_attach_args.
1996-05-05 01:14:07 +00:00
mycroft
0808320ac1
Fix a trivial typo.
1996-05-05 00:40:01 +00:00
jtk
0817b1b518
make it work with GUSPLAYDEBUG defined
1996-05-03 22:35:24 +00:00
christos
1a7708a2a2
- Fix random return value in the probe function.
...
- Add <sys/systm.h> to get prototypes
1996-05-03 19:06:25 +00:00
christos
c3c1caa12a
Remove unused err label; simplify the code in ed_probe_Novell
1996-05-03 19:05:30 +00:00
christos
05dbb85594
cleanup the memh mess:
...
- remove it from the Novell probe.
- cleanup the 3com probe.
1996-05-03 17:29:29 +00:00
thorpej
9d91d0f742
Convert the Etherlink III (ep) driver to use <machine/bus.h>.
...
For the ISA probe, implement a way to keep track of which ISA busses
have been through an ep_isa probe; the static variable that was used
before didn't scale.
1996-04-30 22:27:58 +00:00
thorpej
d614ab5859
Update the 3c507 probe to the new interfaces used by elink_reset()
...
and elink_idseq().
XXX This is just a kludge until the entire driver is converted to use
<machine/bus.h>
1996-04-30 22:21:54 +00:00
thorpej
91b4a6d401
Adapt the elink_reset() and elink_idseq() routines for <machine/bus.h>.
...
In elink_reset(), since some machines may have more than one ISA bus,
implement a way of keeping track of which ISA bus has received an
elink_reset(); The static variable which was used previously didn't
scale.
1996-04-30 22:16:27 +00:00
christos
a1609dc859
- Fix gcc -Wall warnings
...
- BUG: if (error = ...() == EWOULDBLOCK)
1996-04-29 20:30:48 +00:00
christos
1c86bef3bc
Fix gcc -Wall warnings.
1996-04-29 20:28:40 +00:00
christos
e8a8a6298c
- prototype fixes
1996-04-29 20:02:32 +00:00
christos
d0987b1ee9
- prototype fixes
...
- BUG: changed:
val &= CD_POL_MASK;
val | CD_POL_BIT; /* XXX if (pol) */
to:
val &= CD_POL_MASK;
val |= CD_POL_BIT; /* XXX if (pol) */
1996-04-29 20:00:39 +00:00
christos
27292adc4c
- gcc -Wall fixes
1996-04-29 19:50:47 +00:00
christos
c32e566f6c
- missing argument in printf
...
- gcc -Wall fixes
1996-04-29 19:48:26 +00:00
christos
f1dd12ed4e
Prototype fixes
1996-04-29 19:45:32 +00:00
is
07beed1117
Fix an obvious typo (wrong sign of test). At the same time, make the early
...
probe printf prefix unambiguous.
1996-04-25 18:54:45 +00:00
thorpej
aff40e2a72
Break up the ep driver into isa, eisa, and pci front-ends and a
...
bus-independent core driver. Tested on all three bus types, including
an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in
your kernel config file to catch this one).
XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 02:15:42 +00:00
christos
b57c554d06
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:53:28 +00:00
christos
d7b610dca6
Fix 3c590 to use the new pci interface; the pci compat code changes were
...
slightly biffed.
1996-04-19 00:01:19 +00:00
cgd
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
cgd
a610e9d471
include <sys/termios.h> to make comvar.h happy
1996-04-15 18:55:23 +00:00
cgd
b6549d493d
define and export the global variable "comconscflag", the default tty
...
'cflag' for the console. Normally set to TTYDEF_CFLAG, may be
overridden by machine-dependent console attachment code, as necessary.
(Alpha uses it to set cs8 -parenb.) Files including comvar.h now
need to include <sys/termios.h>, because comconscflag is of type
tcflag_t.
1996-04-15 18:54:31 +00:00
cgd
51e85d07b9
update for addition of a machine-dependent cookie as the first argument
...
to isa_intr_{,dis}establish().
1996-04-11 22:27:59 +00:00
cgd
e6456e7285
on non-i386 systems, include <machine/intr.h> (per charles's proposal on
...
tech-kern (?)), to get the IPL_* and IST_* types. pass the machine-dependent
cookie given at attach time on to sub-devices, so they can use it to access
the interrupt functions properly.
1996-04-11 22:25:44 +00:00
cgd
a391172983
include a machine-specific header from ARCH/isa/isa_machdep.h, to define
...
the isa_chipset_tag_t type, and to define or prototype:
isa_attach_hook()
isa_intr_establish()
isa_intr_disestablish()
i.e. the machine-dependent functions to be used my MI ISA code.
Remove prototypes for the latter two functions from this file.
1996-04-11 22:20:50 +00:00
cgd
789a455ab4
if no DDB, define Debugger() to be a panic.
1996-04-10 23:01:13 +00:00
mycroft
0609135a66
Add explicit return types.
1996-04-10 19:03:46 +00:00
thorpej
43411d2e96
Convert to use <machine/bus.h>.
1996-04-09 00:46:15 +00:00
mycroft
740637ad71
If we dequeue a packet due to excessive collisions, make sure we check
...
to see if the queue length has dropped to 0.
1996-04-08 19:02:19 +00:00
cgd
402f77d443
remove tricky open-coded variants of config_found(), by using the
...
child device pointer now returned by config_found(). (previously,
the code played games to get that pointer; now they are unnecesary.)
1996-04-04 07:08:10 +00:00
mycroft
9c6e05d835
Minor optimization, and do a CLRCH after (re)selection just to be safe.
1996-04-03 15:58:13 +00:00
mycroft
b82447e3e1
* Change message priorities so that ABORT comes after IDENTIFY.
...
* Add an ACB_RESET flag, so that a BUS DEVICE RESET can be queued within the
driver.
* If ACB_ABORT or ACB_RESET is set during reselection, schedule a message and
assert ATN.
* Optimize aic_datain_pio(), aic_dataout_pio() and aicintr() somewhat.
* Schedule a timeout only when we select the target, so that commands can't
time out prematurely.
1996-04-03 10:33:45 +00:00
mycroft
70f35ac052
Don't wait for a command complete interrupt when enabling mailbox out
...
interrupts.
1996-04-03 09:45:45 +00:00
mycroft
f0d8cbb1cb
Don't wait for the host adapter to be idle before enabling or disabling
...
mailbox out interrupts.
1996-04-03 08:48:46 +00:00
mycroft
d0742ed3c5
Several things:
...
1) If we get an unexpected disconnect, issue a REQUEST SENSE, as recommended
by the SCSI-2 spec. If the target created a contingent allegiance condition,
this will clear it. Also, if it happened while sending a SDTR or WDTR message,
disable negotiation for that target.
2) Since some lame devices still don't deal correctly, make sure we deassert
ATN if our last message out is interrupted. If we get a MESSAGE PARITY ERROR,
we'll reassert ATN anyway. This should ensure that we never have to send a
MESSAGE NO OPERATION.
3) Set AIC_ABORTING only when actually sending a BUS DEVICE RESET or ABORT,
so we get better error detection.
4) Other internal reorganization of no consequence.
1996-04-01 07:24:37 +00:00
jtk
55960650f7
add include file for function prototypes
1996-03-31 22:50:11 +00:00
mycroft
004f5e8d39
Fix a slight biff with 16-bit DMA in last change.
1996-03-31 20:51:43 +00:00
mycroft
778f21db6a
Use `{in.out}b(iobase + ...' rather than including the base address in
...
the register definitions.
1996-03-30 16:13:24 +00:00
mycroft
72f4fb5692
Fix return type of wds_sense().
1996-03-30 07:40:11 +00:00
mycroft
78681855e4
This version is deprecated.
1996-03-30 05:36:32 +00:00
mycroft
59e1daefcd
Working WD7000 and TMC-7000 driver, from Julian Highfield, with additional work by me.
...
Needs some refinement, but it works.
1996-03-29 20:53:30 +00:00
mycroft
44baed59ef
Fix the mailbox unlock code for CF and CP.
1996-03-28 18:19:05 +00:00
cgd
dbdbd735b8
Update these (as minimally as possible) to work with new PCI interfaces:
...
(1) make pci functions take as an argument a machine-dependent
cookie, to allow more flexibility in implementation.
(use of other PCI functions, etc., left unchanged.)
1996-03-27 04:03:05 +00:00
mycroft
8d60d04ffa
Remove dead variables.
1996-03-25 07:11:12 +00:00
mycroft
3ab38e9ad4
Display the right sync period for fast devices.
1996-03-25 00:18:09 +00:00
mycroft
dac7f9a885
Fix up a couple of printf()s.
1996-03-24 22:23:56 +00:00
mycroft
e2f1ed6ef2
Various, including:
...
* Display as much revision info as we can get.
* Fix a race condition that could cause interrupts to be lost.
* Handle `out of mailbox' conditions (much) more gracefully.
* Schedule timeouts more safely.
* Add diagnostic code to (correctly) detect if a CCB times out before its
outgoing mailbox is emptied.
1996-03-24 22:20:41 +00:00
mycroft
78de5226a1
lto3b -> _lto3b
1996-03-19 03:28:45 +00:00
cgd
b55176ea0c
since this driver tries to block its interrupt with spltty(), it must
...
attach that interrupt with IPL_TTY.
1996-03-18 09:14:32 +00:00
cgd
b5c1728e22
clean up <machine/bus.h> changes a bit; no real functional change.
...
prototype lpt_port_test().
1996-03-17 13:40:29 +00:00
cgd
179f65d15e
Add #ifdef's at the right places, on NCOM_ISA and NCOM_COMMULTI, to
...
only include the relevant code in the probe & attach functions. Still
one probe and one attach function, with #ifdefs, but this is a step
in the right direction and saves a few hundred bytes (ooh, ahh!).
1996-03-17 13:38:14 +00:00
cgd
94907fa254
adjust to deal with expression support for optional file specs
1996-03-17 13:21:09 +00:00
cgd
9d4db41a9f
change the name of com's attachment to commulti, and provide flags
...
for that and the isa attachment in com.h (in addition to the flag for
the presence of 'com' itself).
1996-03-17 07:30:25 +00:00
thorpej
de7c200585
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 00:53:54 +00:00
thorpej
6d9ea4cf59
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 00:43:52 +00:00
cgd
9f762df4e4
clean up a comment, delete unnecessary local variable in probe
1996-03-17 00:26:12 +00:00
cgd
88b335392c
rename asic_addr and nic_addr to asic_base and nic_base, in softc, as
...
they're base I/O ports, not really addresses. rather than using those
softc fields directly, assign local variables (asicbase, nicbase) to have
their values, and use those. (consistency, plus better optimization
potential in some cases.)
1996-03-16 07:24:15 +00:00
cgd
87abc9cdc7
Move contents of edprobe() into ed_find() -- they'll be used by edattach()
...
eventually. rename the probe functions for the various boards to 'find' for
consistency/correctness (but the generic8390 check is still a 'probe').
Add protos for ed_find(), ed_probe_generic8390(), ed_find_WD80x3(),
ed_find_3Com(), and ed_find_Novell(). Fix one minor space nit.
1996-03-16 06:41:20 +00:00
cgd
4beac8eab6
convert NIC_GET and NIC_PUT to take NIC base port address, rather than softc.
1996-03-16 06:18:39 +00:00
cgd
f3bac4c1fb
print out hardware type, and print firmware version more precisely.
...
Information about structures & commands to do this gleaned from
the FreeBSD bt driver.
1996-03-16 05:33:28 +00:00
cgd
c3361cbc2c
prototype bt_cmd(), using varargs/stdarg (ooh, ahh!). Fix up resulting
...
pointer warnings.
1996-03-16 04:37:40 +00:00
jtk
8b3873367f
add MediaVision Jazz16 chipset support. It must be configured with
...
'flags 1' on the sb? kernel configuration file line (because it frobs a
noncontiguous IO port to configure the Jazz16 extensions).
Also, remove static sb_device structure and fill in user's buffer on
each request.
1996-03-16 04:00:09 +00:00
cgd
76f1f884eb
convert to not assume existence of softc at probe time.
1996-03-16 03:20:25 +00:00
cgd
8b404fdede
A foolish consistency... General cleanup: get rid of spaces and tabs at
...
ends of lines, turn aligned blocks of eight spaces into tabs, name all
softc elements with the "sc_" prefix, and call the softc by the commonly
used name, "sc", when passing it around.
1996-03-16 02:54:27 +00:00
cgd
6668fa09a3
Change register definitions to be offset from the I/O base, rather than
...
complete I/O addresses. Access ports via "iobase + REGISTER."
1996-03-16 02:02:54 +00:00
cgd
2b96f0705b
delete unused cruft (the 'software conventions' chunk).
1996-03-16 02:00:43 +00:00
cgd
85286bff2f
convert these to use new <machine/bus.h> interfaces. This involved
...
substantial reworking of the multi-port drivers, as they need to frob
bits in the io-port spaces of their children. As a result, the
commulti->com attachment interface is substantially more complex.
(This may be fixable in the future by making some of the code common,
but as long as io-port allocation checking is planned, it's necessary.)
1996-03-10 09:01:20 +00:00
cgd
5bfb840114
Fix copyright year
1996-03-09 23:37:14 +00:00
cgd
85288c6a61
Include comvar.h, for comprobe1() prototype and for commulti_attach_args.
...
Remove multiple identical definitions for the arg struct used by multiport
boards' to attach slave com ports.
1996-03-09 01:03:59 +00:00
cgd
a7c6dfe1cd
include comvar.h for comprobe1() prototype
1996-03-09 01:02:08 +00:00
cgd
56edbfc4f9
define the common structure used to attach 'com' units as slaves to
...
multiport cards. prototype comprobe1(), which is used by multiport card
drivers.
1996-03-09 01:01:33 +00:00
cgd
645d83b763
minor cleanup. mostly: use COM_NPORTS and a new (driver-specific) NSLAVES
...
macro where appropriate. No point in hard-coding numbers in multiple places.
At the very least, this makes the drivers slightly easier to diff/understand.
1996-03-09 00:09:04 +00:00
cgd
2c11ad408c
convert to use I/O mapping/access macros in <machine/bus.h>.
...
Mostly mechanical changes, except for probe/attach, which have
to map (and, in the case of probe, unmap) the I/O space that the
chip will use.
1996-03-08 22:17:58 +00:00
cgd
b1d3f7607c
remember the bus_chipset_tag_t given by our parent, and pass it on to
...
children.
1996-03-08 20:36:21 +00:00
cgd
5087096150
pass a bus_chipset_tag_t (defined in <machine/bus.h>) to the bus when
...
attaching, and to the devices when attaching them. #include <machine/bus.h>
to make this backward compatible with old #include requirements.
Also, clean up idempotency so that isa/eisa/pci "var.h" headers are
consistent (make them all idempotent).
1996-03-08 20:25:22 +00:00
cgd
acabb62791
the i386 port no longer attaches isa, eisa, and pci at root.
1996-03-04 03:29:12 +00:00
mycroft
d8026ad9ef
Oops; switched two bits.
1996-03-01 04:35:27 +00:00
mycroft
f3b29ca5d2
Remove two unneeded `if's.
1996-03-01 04:13:25 +00:00
mycroft
546ad9e88b
Add support to the ISA DMA framework for auto-initialize mode.
...
Add experimental SB16 code, disabled for now.
1996-03-01 04:08:13 +00:00
cgd
3ca5707161
make ISA bus match/attach, and sub-device configuration machine-independent.
1996-02-28 01:43:45 +00:00
scottr
4005c5fd09
Fix typo (PR 2123, from Michael VanLoon)
1996-02-26 22:48:32 +00:00
mycroft
40d57df71a
Switch byte order of ID and configuration registers for 14f and 34f.
1996-02-24 05:27:49 +00:00
mycroft
3ec5928403
Keep the terminal count information around, as it's self-clearing.
1996-02-22 06:21:48 +00:00
mycroft
a35f0ac985
Add more debugging code.
1996-02-20 12:13:09 +00:00
mycroft
947cae817e
Do not allow the gain to be changed on an original SoundBlaster.
1996-02-20 11:48:50 +00:00
mycroft
015ee926f6
Fix mono volume adjustment.
1996-02-20 11:15:15 +00:00
mycroft
b5f3c5cbdc
XXX This is a kluge.
...
Check to see if the DMA transfer is finished; if not, don't do interrupt
processing.
1996-02-20 04:19:24 +00:00
mycroft
4d6412e7bf
Move the terminal count check into a separate function.
1996-02-20 04:17:05 +00:00
christos
cd5249589d
if_ep.c: Recognize 3c595
1996-02-19 20:18:40 +00:00
mycroft
5021ab87f1
Update copyright notice.
1996-02-19 15:23:25 +00:00
mycroft
5bc567b0d3
Set IER_ETXRDY before outputting any bytes, to prevent race condition.
1996-02-19 15:09:25 +00:00
mycroft
c011a5eae4
Handle break more correctly.
...
Make IER_ETXRDY track TS_BUSY. (Prevents a loop in comintr() if no output
is available.)
Add a bunch of debugging code.
1996-02-19 14:53:03 +00:00
mycroft
760b34026c
Declare a variable...
1996-02-18 22:19:44 +00:00
mycroft
ba2ac1b587
Clean this up a bit.
1996-02-18 22:17:37 +00:00
jtk
47286969ae
Add bass/treble input filter adjustment controls to SB (Pro) driver
1996-02-18 16:36:44 +00:00
mycroft
e5730c4a73
Fix a race condition where we might stop outputting if a write follows a
...
flush too closely.
1996-02-18 09:10:15 +00:00
mycroft
203f5d5329
Add some text describing the UART lossage worked around in the previous.
1996-02-17 04:51:41 +00:00
jtk
03f1e1432a
fix compile error from gusprobe() cleanup
1996-02-17 04:49:50 +00:00
mycroft
121f6570d7
Drain the transmitter FIFO before changing the baud rate or FIFO depth
...
registers. Fixes PR 2046.
Also, if COMCONSOLE is defined, expect CONSPEED to be the baud rate.
1996-02-17 04:04:28 +00:00
jtk
28feffd508
avoid panic'ing when driver gets confused--just spit out a message and
...
keep going.
Improve error messages to include device name.
use STATIC for function declarations/definitions so it's easier to get a
useful symbol table by flipping a switch.
1996-02-17 03:35:22 +00:00
mycroft
7847c9efee
Various:
...
* Snap the sample rate when setting it, and remember only the time constant.
* Set the time constant when changing between play/record.
* Always return the actual sample rate with AUDIO_GETINFO.
1996-02-16 10:10:21 +00:00
mycroft
19f59bf3c2
Prototype the probe and attach functions.
1996-02-16 08:18:32 +00:00
mycroft
7af4edd731
Various, including:
...
* Add more delays while writing registers.
* Replace sc_dma{in,out}_inprogress with sc_dmadir.
* Eliminate the need for sc_locked.
* Add more DPRINTF()s.
1996-02-16 08:07:40 +00:00
christos
11d31f7ce7
Hayes ESP patches [from PR database]
1996-02-10 20:23:18 +00:00
mycroft
28bf676a23
Read the 14f/34f registers in 8-bit mode.
1996-02-09 17:38:09 +00:00
scottr
54c51d4393
Document this file better, mostly from John Vinopal
...
<banshee@gabriella.resort.com>. Closes PR #1864 .
1996-02-05 23:01:50 +00:00
scottr
ae06fdb589
Allow blocksize of NBPG/2 to NBPG for higher sampling rates. From
...
Lennart Augustsson <augustss@cs.chalmers.se>, closes PR 2013.
1996-02-05 21:32:26 +00:00
jtc
3ae2aedf4d
Fix error in copyright notice
1996-02-05 02:18:48 +00:00
jtc
240e22087c
Received copyright assignment
1996-02-05 00:10:32 +00:00
thorpej
919f6728ab
Accept DIOCEJECT as a synonym for CDIOCEJECT. Implement DIOCLOCK
...
separately from CDIOCALLOW and CDIOCPREVENT, even though they perform
basically the same function (with a different interface XXX).
1996-01-30 18:28:02 +00:00
mycroft
02317d25bb
Make the panic message for ISA clone devices more informative.
1996-01-16 07:52:38 +00:00
christos
d3427703db
Hayes ESP support from Michael Van Loon, with minor cleanups. Tested on
...
a single port ESP card; works great!
1996-01-14 23:44:34 +00:00
thorpej
f08d96426e
Oops. Fix RCS id.
1996-01-13 02:06:30 +00:00
thorpej
e422ebca1a
Add the "ahe" driver, autoconfiguration support for the aic7xxx-based
...
Adaptec 2[78]4x SCSI controllers, from Michael Graff <explorer@flame.org>.
Fixes PR #1594 from Noriyuki Soda <soda@sra.co.jp> in a different way.
1996-01-13 02:05:14 +00:00
thorpej
48bb61e0d7
Use WTDBPRINT() instead of DEBUG() for driver debugging printf()s..
...
Fixes PR #1927 , from Erik Bertelsen <erik@arhpc214.uni-c.dk>
1996-01-12 00:54:23 +00:00
hpeyerl
5e81dcd27a
Make it a tad more obvious that this is a 3c505 driver.
1996-01-10 18:21:52 +00:00
chuck
75caa8c729
Imported from OpenBSD/FreeBSD:
...
Add support for the SMC8416 (EtherEZ) ISA ethernet card.
The 8416 has an 8K shared mem (the old driver assumed 16K
and failed at attach time).
1996-01-10 16:49:22 +00:00
mycroft
3441f118d5
Make sure we disk_busy() for every transfer we start.
1996-01-08 21:21:56 +00:00
thorpej
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
mycroft
b9c37470a0
Fix Ultrastor 24f probe, per Andrew Gillham.
1995-12-26 17:16:55 +00:00
mycroft
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
christos
e159767fed
Repeating my mistakes twice... I used sc-> in the pci probe routine
...
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
1995-12-05 03:30:15 +00:00
jtc
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
cgd
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
christos
d125a07adb
My previous changes broke the pcmcia support. For now assume that all non
...
PCI cards look identical to ISA cards.
1995-11-13 20:50:22 +00:00
christos
e4c4e9cb07
Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition
...
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
1995-11-10 19:39:21 +00:00
mycroft
d3c61be30b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 05:01:05 +00:00
mycroft
38a7c4b007
Correct the format of some diagnostics.
1995-11-10 04:41:58 +00:00
mycroft
d8f6a1896b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 04:30:36 +00:00
mycroft
f096f370fb
Use SET(), CLR(), and ISSET() macros.
...
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
1995-10-15 19:43:04 +00:00
mycroft
3450507404
Make sure we only schedule one timeout to refill the mbuf queue.
1995-10-10 03:11:28 +00:00
mycroft
85285f6ead
Add a shutdown hook.
1995-10-07 09:19:13 +00:00
mycroft
86939fd839
Fix typo.
1995-10-04 00:35:07 +00:00
mycroft
393a69d6db
Modularize the CCB/MSCP/ACB/ECB handling a little. No functional changes.
1995-10-03 20:58:56 +00:00
thorpej
a47ab73248
memcmp -> bcmp. Fixes PR #1518 .
1995-09-26 22:56:54 +00:00
thorpej
26419c5a8b
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:31:15 +00:00
hpeyerl
ddbb956f35
fixes a typo, the case where iomem is specified, but iosize is not, and
...
moves a couple of ee16 specific calls into a 'if ee16' protected block.
From Andrew Gillham <gillham@Digitron.COM>
1995-09-26 13:24:48 +00:00
pk
0fbf2ca04a
Make *print() a message if no scsibus was attached. Also, return something
...
valid.
1995-09-14 20:43:09 +00:00
hpeyerl
abe82a6680
Etherexpress-16 driver collision by Andrew Gillham <gillham@Digitron.COM>.
1995-09-14 12:41:32 +00:00
mycroft
8887de9230
opri --> s
1995-08-12 22:58:01 +00:00
mycroft
240560e9fd
ia_irq has not been a power of 2 for a long time...
1995-08-12 22:37:58 +00:00
mycroft
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
mycroft
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
mycroft
f657f5bf3e
Make this interface simplex. It's more efficient, and sidesteps the
...
problem of receiving our own multicasts in promiscuous mode. Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
mycroft
6567855472
Count collisions and errors better.
1995-08-05 23:53:18 +00:00
mycroft
82b6eec41c
Use an intermediate variable to shorten label initialization code.
...
Make wddump() work on more machines.
1995-08-05 23:50:23 +00:00
mycroft
24a5e56396
Use an intermediate variable to shorten label initialization code.
1995-08-05 23:47:52 +00:00
mycroft
60d2d483ca
Turn off the mbi diagnostics completely.
1995-07-29 23:04:54 +00:00
mycroft
a4fcbe857d
Don't loop if we're out of CCBs/SCBs/MSCPs.
1995-07-28 22:49:56 +00:00
mycroft
38036ed16e
Fix an oversight in the previous.
1995-07-27 05:01:08 +00:00
mycroft
c9f7b2a185
Add PCI-specific configuration for PCnet-PCI.
1995-07-27 04:39:05 +00:00
mycroft
7ba8b413d9
Disable diagnostics related to expected mbi race condition.
1995-07-27 01:00:11 +00:00
mycroft
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
mycroft
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
cgd
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
cgd
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
mycroft
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
mycroft
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
mycroft
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
mycroft
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
mycroft
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
mycroft
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
mycroft
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
mycroft
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
mycroft
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
mycroft
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
mycroft
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
mycroft
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
mycroft
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
mycroft
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
mycroft
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
mycroft
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
mycroft
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
mycroft
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
mycroft
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
mycroft
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
mycroft
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
mycroft
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
mycroft
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
mycroft
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
mycroft
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
mycroft
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
brezak
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
cgd
880567e771
fix from Onno van der Linden for large-file read timeouts on double-speed
...
drives. A different read command must be used on double-speed drives.
It boggles my mind that people could design hardware this stupid.
1995-07-10 01:27:24 +00:00
cgd
e574814605
insert missing call to splx() when {aha,bt}_send_mbo() returns null.
...
from enami@sys.ptg.sony.co.jp .
1995-07-08 00:34:16 +00:00
brezak
4b4b3ee81a
Cleanup
1995-07-07 02:19:48 +00:00
brezak
dd3d2e28ed
Setup irq correctly (PR#1179)
1995-07-07 02:15:12 +00:00
brezak
0bdd4aa7c2
add support for cs4231
1995-07-07 02:11:45 +00:00
mycroft
9624704e02
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-05 02:32:53 +00:00
mycroft
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
mycroft
eb99dcc09a
Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit
...
the case of no pending input in compoll().
1995-07-04 06:47:18 +00:00
cgd
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
cgd
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
cgd
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
cgd
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
mycroft
d9fc8ef092
Remove check for if_addrlist == 0; if_attach() always puts one address on
...
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
mycroft
e6c81430d2
Add missing `break;'s.
1995-06-09 18:09:27 +00:00
cgd
da5b5dfa63
make match/attach routines and cfdriver struct mi
1995-06-07 06:46:04 +00:00
cgd
5a29222f9c
prototype isascan, spacing
1995-06-07 06:45:44 +00:00
mycroft
4bfd7749ad
Various:
...
* Check for CTS in the correct register.
* Only do a selwakeup() if we output something.
* Don't make assumptions about what TTYDISC does.
1995-06-05 19:08:09 +00:00
mycroft
5b37a8fded
Handle BREAK correctly when not entering DDB.
1995-06-04 20:50:14 +00:00
mycroft
38847d04c0
Add an input FIFO, and fix several flow control problems. Based on code from
...
Felix A. Croes.
1995-06-04 20:39:22 +00:00
jtc
d045544ebd
Changed ns82450 to ns8250 and dropped ns82550 from probe console messages.
1995-06-01 21:26:51 +00:00
mycroft
488bc82ac3
Fix multicast filter calculation.
1995-05-28 11:29:46 +00:00
mycroft
addaff473b
Only use the `no pending interrupt' bit in the IIR; the other bits
...
are too unreliable on clone chips.
1995-05-28 03:26:37 +00:00
cgd
3ebc44f6e1
isa softc structs are larger than 'struct device'
1995-05-17 02:07:03 +00:00
cgd
c821cb684a
(1) conditionalize debugger usage in comeint with DDB, not COMCONSOLE;
...
latter would lead to undefined symbols if DDB not defined.
(2) check for break on console, and therefore debugger entry (if ddb
in kernel) earlier, so that the device doesn't need to be open.
(3) return immediately after breaking into the debugger in comeint().
(4) only do the normal character input routine in comintr if receive
mask yeilds _EXACLTY_ LSR_RXRDY. if there's only a receive
error, or there's a receive error _and_ a received character,
do comeint().
(former two by me. latter two from Bob Baron <rvb@cs.cmu.edu>.)
1995-05-12 17:54:41 +00:00
mycroft
8742c18c06
Update for slightly modified ARP handling.
1995-05-10 14:04:14 +00:00
brezak
c68110e043
Remove strings
1995-05-08 22:01:34 +00:00
brezak
05f27a97ce
Fix holes in device index space. PR#1028
1995-05-08 17:28:51 +00:00
cgd
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
mycroft
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
mycroft
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
hpeyerl
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
hpeyerl
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
mycroft
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
brezak
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
mycroft
cb856a9a4d
Watchdog now takes an int, not a short.
1995-04-19 22:42:51 +00:00
mycroft
9e28a35469
Fix thinko in previous change.
1995-04-19 22:04:33 +00:00
mycroft
53d73c77a5
Garbage collect #includes.
1995-04-19 19:10:35 +00:00
mycroft
4c28b7cb87
Change `needs-count' to `needs-flag'.
1995-04-19 19:02:54 +00:00
mycroft
e1315808a7
Implement comtty().
1995-04-19 18:59:27 +00:00
mycroft
496acd4619
Correct a couple of things, and add a `fe' device.
1995-04-19 02:11:10 +00:00
mycroft
800b1f371a
Fix obvious bug in reading from SB_MIC_PORT.
1995-04-17 23:48:06 +00:00
cgd
15552a0e17
if_le conflicts with the Alpha; move description back to i386
1995-04-17 20:23:32 +00:00
cgd
af67271a66
try to actually (gasp!) describe the drivers.
1995-04-17 17:54:15 +00:00
cgd
d61eaf6f6d
ISA config.new files description.
1995-04-17 16:58:30 +00:00
cgd
982230db44
update for new locations
1995-04-17 15:48:20 +00:00
cgd
8a640328ed
clean up several ISA device interfaces: autoconfiguration, header
...
inclusion, and interrupt configuration. more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
mycroft
04e937dcbd
Don't boundary check I/O to the `raw' partition.
1995-04-15 05:01:26 +00:00
mycroft
c7a7d5c262
Sync with the rest of the world.
1995-04-11 05:10:20 +00:00
mycroft
8d8af964a7
Move NIC register definitions to a global location.
1995-04-11 04:45:26 +00:00
mycroft
b703c76655
Update for if.h. Define helper macros for accessing NIC registers. Optimize
...
edrint() a little more.
1995-04-11 04:38:42 +00:00
mycroft
70839d3b04
Change start and watchdog return values to void.
1995-04-10 18:21:42 +00:00
mycroft
68c8c80929
kernel_pmap --> pmap_kernel()
1995-04-10 16:48:27 +00:00
mycroft
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
mycroft
95c5c4f79f
Most of the console functions return void. Also change interrupt logic
...
slightly.
1995-04-10 01:05:55 +00:00
mycroft
87d43afd46
Clean up to match common code, and fix a typo.
1995-04-07 22:27:42 +00:00
mycroft
0e67f2a78e
Rename a few constants to match the chip documentation.
1995-04-04 01:59:28 +00:00
mycroft
13ac06ec6a
More debugging printf()s, from Rafal Boni.
1995-04-04 01:44:23 +00:00
mycroft
c04ae31e95
Prototype iexmit().
1995-04-03 21:22:37 +00:00
mycroft
9085715229
Some pseudo-random cleanup, and try to start transmitting packets quicker.
1995-04-03 21:17:13 +00:00
mycroft
7e2dabf972
Add a missing unlock.
1995-04-01 10:29:41 +00:00
mycroft
508897dfcc
Insert a missing unlock.
1995-04-01 10:27:56 +00:00
mycroft
03e3548ec7
Change the locking protocol to match other drivers.
1995-04-01 08:45:33 +00:00
mycroft
5ef3b8b957
Always load the TOC. Turn off the TOC bit in the mode register so the busy
...
light goes off.
1995-04-01 08:40:11 +00:00
mycroft
e17c63cee6
Revamp the locking mechanism slightly. Update some outdated comments, and add
...
a few new ones.
1995-03-29 23:36:27 +00:00
briggs
0884490297
KERNEL -> _KERNEL.
1995-03-29 21:56:46 +00:00
jtc
71ab4ed9dc
KERNEL -> _KERNEL
1995-03-28 18:13:48 +00:00
mycroft
aff93b44b4
Remove unused variable.
1995-03-27 21:44:11 +00:00
mycroft
657ddd6fde
Remove a tiny bit of redundant code.
1995-03-27 18:08:34 +00:00
mycroft
0a3d4f358a
It's not necessary to do a GETSTAT before each read.
1995-03-27 16:48:45 +00:00
mycroft
c61cb27f9c
Small garbage collection, and turn off debugging info by default.
1995-03-27 16:04:07 +00:00
mycroft
306af9bd89
Largely rewritten by me, with some input from Dave Burgess. Implement most of
...
the CDIOC* calls correctly, improve performance by 10x when interrupts work,
and implement the same generic disk framework as other drivers.
Needs some more work.
1995-03-27 15:45:20 +00:00
jtc
7c04233887
KERNEL -> _KERNEL
1995-03-26 20:23:52 +00:00
mycroft
b51403f60d
Remove the write protect check altogether, and rely on the drive to do it.
1995-03-25 19:45:18 +00:00
mycroft
ff6c206c3f
Use void* rather than caddr_t in many places.
1995-03-25 00:00:53 +00:00
mycroft
06d0a67a07
Check for read-only media in open(), not write().
1995-03-23 12:11:07 +00:00
mycroft
02df08a47e
Allow DIOCWDINFO even if label is not `writable'.
1995-03-23 11:33:18 +00:00
brezak
331f0252c6
Fix probing of slave devices and remove unneeded ffs()'s
1995-03-21 14:05:28 +00:00
brezak
8193ffc379
Add support for PAS 16 basic
1995-03-15 18:45:58 +00:00
glass
af46d07f24
fix compilation error. don't bother checking for IRQ2
1995-03-15 16:43:09 +00:00
brezak
36fa07bde5
Fixes defect port-i386/860 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. Kernel will not link with only ProAudio Spectrum driver
specified.
1995-03-14 18:43:19 +00:00
brezak
f3226ad49e
Fixes defect port-i386/864 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. pas.c doesn't recognize ProAudio Spectrum 16 Basic card.
1995-03-14 18:41:36 +00:00
mycroft
37c67f3481
Turn off two diagnostic printfs by default.
1995-03-14 02:35:11 +00:00
brezak
7ce1465911
Fix SB8 playback. From David Gluss <david@pure.com>
1995-03-13 14:37:12 +00:00
brezak
1c9582b63e
Add IRQ 9 as a valid IRQ
1995-03-13 14:29:11 +00:00
brezak
83fffa3985
Cleanup for SB16 (From Jan Sparud)
1995-03-08 18:27:35 +00:00
brezak
63d3904bce
Use irq directly not as a mask
1995-02-28 21:47:42 +00:00
glass
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
cgd
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
brezak
559df5705c
PSS driver; needs testing with config.new
1995-02-21 04:15:03 +00:00
brezak
39b8de8e12
Driver for Windows sound system; not extensively tested
1995-02-21 02:28:42 +00:00
brezak
32eec53a2d
SoundBlaster driver for SB, SB16 and SBPRO
1995-02-21 02:28:06 +00:00
brezak
a70ae7273c
PAS driver; uses SB emulation for now
1995-02-21 02:27:18 +00:00
brezak
977594d1a9
Driver for ad1848 codec
1995-02-21 02:26:39 +00:00
mycroft
8b834a58ca
Display more information when we get bogus data off the card.
1995-02-19 18:05:45 +00:00
mycroft
0f894be19c
Rearrange epintr() to insure proper edge-trigger of the interrupt latch.
1995-02-19 06:13:53 +00:00
mycroft
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
mycroft
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
mycroft
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
mycroft
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
mycroft
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
mycroft
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
cgd
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
cgd
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
mycroft
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
mycroft
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
mycroft
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
mycroft
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
mycroft
3dddacd1ce
Rearrange tests so `offline' has higher priority than `out of paper'.
1995-01-22 00:12:39 +00:00
mycroft
fcdbd2bd7b
Remove outdated comment.
1995-01-16 10:36:26 +00:00
mycroft
87d587e640
Simplify some sanity checks.
1995-01-13 14:46:44 +00:00
mycroft
1e5cd9212d
(Almost) allow sector sizes other than 512 bytes. Reduce some expensive operations.
1995-01-13 12:30:59 +00:00
mycroft
7650bd97fc
Always boundary check I/O.
1995-01-13 10:46:32 +00:00
mycroft
0033c975c6
Fix another bug in the DMA code.
1995-01-13 10:22:58 +00:00
mycroft
4abdb375bc
Minor rearrangement.
1995-01-13 09:40:21 +00:00
mycroft
c2bc310a37
Change the way sc_skip is used. Fix a bug in the (incomplete) DMA code. Add a
...
new sc_blkno (which will be useful later).
1995-01-13 08:58:16 +00:00
pk
0a22930d97
Explicitly test the RXRDY status bit on incoming characters.
1995-01-11 09:56:40 +00:00
mycroft
06b0414491
Actually, do the ID reset in elink_reset().
1995-01-07 21:37:54 +00:00
mycroft
37e16c5747
Don't print line numbers in most of the diagnostics.
1995-01-07 06:49:35 +00:00
mycroft
d4f91d51a9
Fix a race condition between normal I/O and wd_get_parms().
1995-01-07 03:07:22 +00:00
mycroft
7f61bec5cd
Cosmetic changes, to look more like the new esp.c will.
1995-01-07 01:51:07 +00:00
mycroft
ba288b4ae1
Do the reset in the individual drivers, not in elink_idseq().
1995-01-06 21:41:26 +00:00
mycroft
6125e1b551
Fix oversight in previous.
1995-01-04 00:47:53 +00:00
mycroft
9e499d41b3
\
...
These files have been 99% rewritten from the original ast driver. Add an
appropriate copyright notice.
1995-01-03 22:38:54 +00:00
mycroft
0349c5b9e0
Add a multiplexer for BOCA serial boards.
1995-01-03 22:26:36 +00:00
hpeyerl
09834a5bd3
This is correct according to the docs on both cards.
...
Doesn't seem to make any difference to the known problems though.
1995-01-03 05:04:04 +00:00
mycroft
b6c8a9a4e9
Update intr_establish() prototype.
1995-01-03 03:14:35 +00:00
mycroft
b5cf1b5ddd
Add interrupt sharing types.
1995-01-03 01:30:14 +00:00
mycroft
326830c1ba
Use direct config for subdevices.
1995-01-02 22:27:46 +00:00
mycroft
e148dc7a64
Move setting of sc_maddr so soft config works.
1995-01-02 22:01:05 +00:00
mycroft
a774fa6fe5
Use soft configuration when possible.
1995-01-02 21:57:04 +00:00
mycroft
3a967fcbb6
More cleanup.
1995-01-02 21:27:27 +00:00
mycroft
72dec3b548
Various cleanup.
1995-01-02 20:54:01 +00:00
mycroft
3a74796b3e
Need isareg.h.
1995-01-02 20:39:35 +00:00
mycroft
894bb9145f
Use soft configuration where possible.
1995-01-02 20:32:55 +00:00
mycroft
2d5b04744a
Don't assume ia_maddr is in the hole.
1995-01-02 20:06:29 +00:00
mycroft
76b0b02cc3
Fix non-serious typo.
1994-12-31 05:34:00 +00:00
mycroft
8fd135209c
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 19:42:47 +00:00
hpeyerl
262b425866
temporary warning until I get new docs.
1994-12-28 16:47:50 +00:00
mycroft
ce06e718ad
Fix flags to isa_dmastart().
1994-12-17 18:45:11 +00:00
mycroft
ca65f2ce5d
Remove dkbad.h.
1994-12-14 15:17:22 +00:00
mycroft
e694663b46
Make the diagnostics less cryptic.
1994-12-12 04:43:51 +00:00
mycroft
3e4a358e28
Patch from Thomas Eberhardt to make PCnet-32 chips work.
1994-12-12 04:39:52 +00:00
christos
303841c92e
3c509 fixes to avoid adapter getting stuck in high traffic conditions.
...
I don't particularly like the fixes, but at least now the 3c509 never
gets stuck. On the other hand, performance still sucks in some cases.
1994-12-10 14:52:02 +00:00
mycroft
793e542f89
Fix format of attach message.
1994-12-10 05:55:26 +00:00
mycroft
211b002017
Ignore ERR during diagnostics.
1994-12-01 10:45:26 +00:00
mycroft
867ebf1d84
Clear the controller active flag after a timeout.
1994-11-30 02:32:03 +00:00
mycroft
5584ff927f
Don't stall the queue on CHECK SENSE if we get a reselect while selecting.
1994-11-30 02:08:01 +00:00
mycroft
639a64de08
Fix a null pointer reference.
1994-11-29 21:35:13 +00:00
mycroft
51bed8d804
Add an assertion mechanism to check for more abnormal conditions.
1994-11-29 21:29:56 +00:00
mycroft
58cb5339d6
For consistency...
1994-11-29 20:57:28 +00:00
mycroft
41b26a6dfd
Handle BUS FREE phase a little differently, to get better error detection. Other
...
cleanup.
1994-11-29 20:08:27 +00:00
mycroft
bb90feebac
Disable debugging breakpoints by default.
1994-11-29 17:56:49 +00:00
mycroft
5ac2484d95
* Redo most of the message and phase state machines. Multiple pending
...
message outs should now work correctly (including retransmissions).
Multiple messages ins should be more efficient. Missing REQ after
reselection phase should now (correctly) cause a wait with ENREQINIT
set.
* Abstract out the reselection out sequence, and use it directly to
get sense info. (This is somewhat faster than the generic done/sched
sequence.)
* If there are no ACBs available, wait interruptibly for one.
* Leave the interrupt registers alone during message in/out; just
watch for phase change. Don't (incorrectly) reenable interrupts
during data in/out; defer that to aicintr().
* Handle command pointer per SCSI 2 spec.
* Other minor coding improvements.
1994-11-29 17:50:39 +00:00
christos
6a2c060851
fix unary plus typo :-)
1994-11-25 23:19:03 +00:00
mycroft
cba32aa25f
Minor update for new autoconfig.
1994-11-25 08:17:21 +00:00
mycroft
0649f37219
Officially credit Onno.
1994-11-23 22:00:08 +00:00
mycroft
2058abab15
Forgot to commit this as part of the LBA changes.
1994-11-23 07:56:52 +00:00
mycroft
cc44b4600c
There's no point in bothering to unlock what we didn't lock.
1994-11-23 07:54:15 +00:00
mycroft
6dda55519e
Fix an outdated comment.
1994-11-23 03:11:01 +00:00
mycroft
a3fc466734
Use logical block addressing if available. Be a little more careful about
...
maintaining timeouts. Clean up wddump() a bit.
1994-11-23 01:35:43 +00:00
mycroft
525fc36e19
Implement 32-bit reads and writes, but for now assume 16-bit mode.
1994-11-22 10:20:16 +00:00
mycroft
3a99ddf172
Add a missing newline in some error messages.
1994-11-22 09:36:56 +00:00
mycroft
db3bde9525
Implement EIDE multi-sector PIO and DMA modes, based on code from Onno van
...
der Linden. Also, various structural cleanup, and fix two bogons that crept
in, and remove all of the old clustering nonsense.
1994-11-22 09:33:59 +00:00
mycroft
1e01855683
Minor fix to debugging code.
1994-11-22 05:50:48 +00:00
mycroft
85826f0fbe
Fudge a couple more fields for ancient disks.
1994-11-22 05:39:16 +00:00
mycroft
e1a7bac628
Change some constant names, etc., to better match the ATA spec.
1994-11-22 05:34:49 +00:00
mycroft
95edd299b0
Add still more locking.
1994-11-22 03:23:49 +00:00
mycroft
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
mycroft
9a3840f2f0
Stylistic changes.
1994-11-18 22:25:12 +00:00
mycroft
61800cfa25
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 22:07:32 +00:00
mycroft
35cdd801e6
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 21:57:40 +00:00
mycroft
a2727ec558
Check IRQ 9, not IRQ 2.
1994-11-15 00:00:24 +00:00
mycroft
b341f7a8c0
Map IRQ 2 to IRQ 9.
1994-11-14 23:58:56 +00:00
mycroft
21e911d911
Update for new autoconfig.
1994-11-07 09:03:48 +00:00
mycroft
2a9b6f7959
Fix stupid bug in last change.
1994-11-04 23:30:15 +00:00
mycroft
4ec6774e12
Add a simplified version of wdcommand() that can be used in some cases.
...
Avoid needing a wd_softc inside wdprobe().
1994-11-04 23:18:06 +00:00
mycroft
3df6bf0c0e
Trivial stylistic changes.
1994-11-04 21:32:23 +00:00
mycroft
854d8d96dc
Rearrange slightly.
1994-11-04 19:25:34 +00:00
mycroft
cfc4633919
Remove outdated comment.
1994-11-04 19:17:47 +00:00
mycroft
b7acf321cd
No longer needs icu.h.
1994-11-04 18:59:34 +00:00
mycroft
29414c5a0a
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:34:50 +00:00
mycroft
9af4fee97d
Use kvtop() rather than address arithmetic in a couple of places.
1994-11-04 08:55:53 +00:00
mycroft
1948fcb3fa
Add a new function config_scan(), which just calls a particular function
...
with each plausibly cfdata, ignoring the priority mechanism completely.
1994-11-04 06:40:11 +00:00
mycroft
2e8ae560f6
Commit incest with the config system for this one specific case.
1994-11-04 03:57:32 +00:00
mycroft
fa769b0e97
Set ia_irq correctly.
1994-11-04 02:55:32 +00:00
mycroft
7773b21b74
Correct an oversight.
1994-11-04 00:53:06 +00:00
mycroft
d4dd538296
Oops; forgot isacd.
1994-11-04 00:07:39 +00:00
mycroft
3fca7e771a
New version using standard config_*() functions.
1994-11-03 23:53:19 +00:00
mycroft
ebbdd6473b
Update to match autoconfig code.
1994-11-03 23:26:03 +00:00
mycroft
19fc9d55c8
*intr() arg does not need to be void*.
1994-11-03 23:23:38 +00:00
mycroft
d0163400d1
Update to match autoconfig code.
1994-11-03 23:21:24 +00:00
mycroft
54cc63645d
Update to match autoconfig code.
1994-11-03 23:08:27 +00:00
mycroft
d23d1e83dc
Use indirect config for subdevices, and add dkdrivers where missing.
1994-11-03 22:55:58 +00:00
mycroft
283745574f
Commit this, though it really does need work.
1994-11-03 16:55:57 +00:00
cgd
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
mycroft
9769a6a6f7
Various:
...
* Forget all cached info when opening a new disc.
* If the disc is removed, flush the buffer queue rather than stalling it.
* Set the default label after getting the disc size, and fill in the info
for RAW_PART also.
* Change another use of the unit number to a softc pointer.
* Use a dkdevice to hold the label and open partition masks.
* Force the partition offset to 0 for RAW_PART, regardless of the label.
* Nuke MCDPHYS() and MCDREADRAW; they had a silly bug that caused the code
to not work, and they aren't useful anyway.
Some other minor cleanup.
1994-10-28 23:39:59 +00:00
cgd
022ee8f7fe
new RCS ID format.
1994-10-27 04:14:23 +00:00
mycroft
556a119342
Implement *cnpollc().
1994-10-26 18:06:30 +00:00
mycroft
260ddbefb7
Rearrange ed_init() slightly, to better correspond to the National manual.
...
Optimize ed_rint() slightly in the case of multiple packets. (Avoid an outb
and an inb for each packet).
1994-10-23 23:24:56 +00:00
mycroft
603fe7b5a6
Slight optimization.
1994-10-23 21:38:00 +00:00
mycroft
0114159848
Fix the packet length correction for buggy chips so that it actually works,
...
and always use it (otherwise short packets could still be corrupted). Also
produce a diagnostic message if DIAGNOSTIC, since it *is* a hardware bug.
Add an ED_PAGE_SHIFT constant, and use it, to avoid GCC doing horrendous
things with divides and multiplies.
1994-10-23 21:22:13 +00:00
mycroft
3e30a415ae
Be careful not to stack multiple timeouts.
1994-10-20 19:22:01 +00:00
mycroft
4d072c5435
Remove the local timeout mechanism, and just use explicit timeout()/untimeout()
...
calls.
1994-10-20 18:37:45 +00:00
mycroft
c11a06cbc2
Always set d_secsize to 512 for now.
1994-10-20 17:03:09 +00:00
mycroft
0862d07daf
Don't switch to single-sector mode just because we got a corrected error.
1994-10-20 16:36:21 +00:00
mycroft
d4153fff4d
Rearrange wdcstart() in a more logical fashion, and eliminate many redundant
...
calculations. Also, speed up bad block searching a little.
1994-10-20 16:19:08 +00:00
mycroft
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
mycroft
cae71ba91d
Various changes:
...
* Add a dkdevice; move sc_*openpart, sc_label, and sc_cpulabel into it.
* Turn sc_wlabel into a flag, and don't set it automatically in DIOCWLABEL.
* If there is no label, disallow all I/O except to the raw partition.
* Don't allow I/O to `unused' partitions.
* Beginnings of support for block sizes other than 512 bytes.
Other minor changes.
1994-10-20 13:44:46 +00:00
mycroft
8ae8b4ab29
Bug fixes from Rafal Boni:
...
* Set promiscuous mode flag before configuring card, so it actually works.
* Handle failed TDR commands correctly.
* Remove some apparently defunct and bogus code.
(This driver needs more work.)
1994-10-18 13:40:30 +00:00
cgd
320359f8e2
change, requested by Jarle Greipsland
1994-10-17 00:08:29 +00:00
cgd
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
mycroft
6f5794ecba
Fix bugs in dealing with odd-length mbufs in ed_pio_write_mbufs(). From
...
John Hood.
1994-10-14 13:05:13 +00:00
mycroft
7c01f7ce51
Changes from DG to deal with some old chips that corrupt the packet length.
1994-10-12 13:42:00 +00:00