Ignore the "monitor" portion and treat them the same
as their base ASIs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VIS4 completes the set, adding missing signed 8-bit ops
and missing unsigned 16 and 32-bit ops.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The manual separates VIS 3 and VIS 3B, even though they are both
present in all extant cpus. For clarity, let the translator
match the manual but otherwise leave them on the same feature bit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rearrange PDIST so that do_dddd is general purpose and may
be re-used for FMADDd etc. Add pickNaN and pickNaNMulAdd.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Form the proper register decoding from the start.
Because we're removing the translation from the inner-most
gen_load_fpr_* and gen_store_fpr_* routines, this must be
done for all insns at once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation returns the high 16 bits of a 24-bit multiply
that has been sign-extended to 32 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apply DFPREG to compute the register number.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Follow the Oracle Sparc 2015 implementation note and bound
the input value of N to 5 from the lower 3 bits of rs2.
Spell out all of the intermediate values, matching the diagram
in the manual. Fix extraction of upper_x and upper_y for N=0.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Almost all of the disas_log implementations are identical.
Unify them within translator_loop.
Drop extra Priv/Virt logging from target/riscv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmY4wZceHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIftQsH+wfIWymTdQMowfM6
Ze/T8KODn+MqU5eg25VPSTojnmr7LFaCj2yK6zWX61RwIqtMc3NaxX0G7ksW12/g
35ACqiEEd5WRDhAtVhj5Wp+WEDoR4AD3LWIaN7a/qjO3qb78l7Bujw3qXzGSq4lQ
hST6dTgMwn5LhJOyz+5dORVUK1UZSBuDxHeKRHgdoFi6yqGQ5bao5TpaDYOnGSbx
8KPrAFfXG1T6xRS8Ih5HXAPE5VJztLFPiVtCTTrETDP/o8EzvOZj5y/nJVZXXC3N
57g+QyJX9EdrRZvobef4LnNnoZyiqG+uQNugglqZqjiiLjl6AzYxI+ed0hU+cZR9
pz76Hr8=
=i2cV
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20240506' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmY4wZceHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIftQsH+wfIWymTdQMowfM6
# Ze/T8KODn+MqU5eg25VPSTojnmr7LFaCj2yK6zWX61RwIqtMc3NaxX0G7ksW12/g
# 35ACqiEEd5WRDhAtVhj5Wp+WEDoR4AD3LWIaN7a/qjO3qb78l7Bujw3qXzGSq4lQ
# hST6dTgMwn5LhJOyz+5dORVUK1UZSBuDxHeKRHgdoFi6yqGQ5bao5TpaDYOnGSbx
# 8KPrAFfXG1T6xRS8Ih5HXAPE5VJztLFPiVtCTTrETDP/o8EzvOZj5y/nJVZXXC3N
# 57g+QyJX9EdrRZvobef4LnNnoZyiqG+uQNugglqZqjiiLjl6AzYxI+ed0hU+cZR9
# pz76Hr8=
# =i2cV
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 04:40:07 AM PDT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
* tag 'qemu-sparc-20240506' of https://github.com/mcayland/qemu:
target/sparc: Split out do_ms16b
target/sparc: Fix FPMERGE
target/sparc: Fix FMULD8*X16
target/sparc: Fix FMUL8x16A{U,L}
target/sparc: Fix FMUL8x16
target/sparc: Fix FEXPAND
linux-user/sparc: Add more hwcap bits for sparc64
hw/sparc64: set iommu_platform=on for virtio devices attached to the sun4u machine
docs/about: Deprecate the old "UltraSparc" CPU names that contain a "+"
docs/system/target-sparc: Improve the Sparc documentation
target/sparc/cpu: Avoid spaces by default in the CPU names
target/sparc/cpu: Rename the CPU models with a "+" in their names
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
The unit operation for fmul8x16 and friends is described in the
manual as "MS16b". Split that out for clarity. Improve rounding
with an unconditional addition of 0.5 as a fixed-point integer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-8-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This instruction has f32 inputs, which changes the decode
of the register numbers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-7-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Not only do these instructions have f32 inputs, they also do not
perform rounding. Since these are relatively simple, implement
them properly inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240502165528.244004-6-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
These instructions have f32 inputs, which changes the decode
of the register numbers. While we're fixing things, use a
common helper for both insns, extracting the 16-bit scalar
in tcg beforehand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-5-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This instruction has f32 as source1, which alters the
decoding of the register number, which means we've been
passing the wrong data for odd register numbers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-4-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is a 2-operand instruction, not 3-operand.
Worse, we took the source from the wrong operand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240502165528.244004-3-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The output of "-cpu help" is currently rather confusing to the users:
It might not be fully clear which part of the output defines the CPU
names since the CPU names contain white spaces (which we later have to
convert into dashes internally). At best it's at least a nuisance since
the users might need to specify the CPU names with quoting on the command
line if they are not aware of the fact that the CPU names could be written
with dashes instead. So let's finally clean up this mess by using dashes
instead of white spaces for the CPU names, like we're doing it internally
later (and like we're doing it in most other targets of QEMU).
Note that it is still possible to pass the CPU names with spaces to the
"-cpu" option, since sparc_cpu_type_name() still translates those to "-".
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2141
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240419084812.504779-3-thuth@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Commit b447378e12 ("qom/object: Limit type names to alphanumerical ...")
cut down the amount of allowed characters for QOM types to a saner set.
The "+" character was meant to be included in this set, so we had to
add a hack there to still allow the legacy names of POWER and Sparc64
CPUs. However, instead of putting such a hack in the common QOM code,
there is a much better place to do this: The sparc_cpu_class_by_name()
function which is used to look up the names of all Sparc CPUs.
Thus let's finally get rid of the "+" in the Sparc CPU names, and provide
backward compatibility for the old names via some simple checks in the
sparc_cpu_class_by_name() function.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240419084812.504779-2-thuth@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
We have abi_ulong == uint32_t for the 32-bit ABI.
Use the generic type to avoid to depend on the
"exec/user/abitypes.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-14-philmd@linaro.org>
