Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only
return 'true' if the specified counter is enabled and neither prohibited
or filtered.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-5-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because of the PMU's design, many register accesses have side effects
which are inter-related, meaning that the normal method of saving CP
registers can result in inconsistent state. These side-effects are
largely handled in pmu_op_start/finish functions which can be called
before and after the state is saved/restored. By doing this and adding
raw read/write functions for the affected registers, we avoid
migration-related inconsistencies.
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-4-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can perform this with fewer operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 4 attributes that controls the EL1 enable bits, as we may not
always want to turn on pointer authentication with -cpu max.
However, by default they are enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the main crypto routine, an implementation of QARMA.
This matches, as much as possible, ARM pseudocode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-28-richard.henderson@linaro.org
[PMM: fixed minor checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is not really functional yet, because the crypto is not yet
implemented. This, however follows the AddPAC pseudo function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is not really functional yet, because the crypto is not yet
implemented. This, however follows the Auth pseudo function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stripping out the authentication data does not require any crypto,
it merely requires the virtual address parameters.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_regime_tbi{0,1} functions are replacable with the new function
by giving the lowest and highest address.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use TBID in aa64_va_parameters depending on the data parameter.
This automatically updates all existing users of the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will want to check TBI for I and D simultaneously.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to reuse this from helper-a64.c. Provide a stub
definition for CONFIG_USER_ONLY. This matches the stub
definitions that we removed for arm_regime_tbi{0,1} before.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly want to talk about TBI as it relates to data.
Passing around a pair of variables is less convenient than a
single variable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out functions to extract the virtual address parameters.
Let the functions choose T0 or T1 address space half, if present.
Extract (most of) the control bits that vary between EL or Tx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-19-richard.henderson@linaro.org
[PMM: fixed minor checkpatch comment nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we could expose stage_1_mmu_idx, the combination is
probably going to be more useful.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pattern
ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false));
is computing the full ARMMMUIdx, stripping off the ARM bits,
and then putting them back.
Avoid the extra two steps with the appropriate helper function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is, or will shortly become, too big to inline.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not that there are any stores involved, but why argue with ARM's
naming convention.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-15-richard.henderson@linaro.org
[fixed trivial comment nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will enable PAuth decode in a subsequent patch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is only used by AArch64. Code movement only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now properly signals unallocated for REV64 with SF=0.
Allows for the opcode2 field to be decoded shortly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cryptographic internals are stubbed out for now,
but the enable and trap bits are checked.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This path uses cpu_loop_exit_restore to unwind current processor state.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 5 bits of state that could be added, but to save
space within tbflags, add only a single enable bit.
Helpers will determine the rest of the state at runtime.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Post v8.4 bits taken from SysReg_v85_xml-00bet8.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add storage space for the 5 encryption keys.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-2-richard.henderson@linaro.org
[PMM: use 0xf rather than -1 in FIELD_DP64() expressions to
avoid clang warnings about implicit truncation from int to
bitfield changing the value]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In U-boot, we switch from S-SVC -> Mon -> Hyp mode when we want to
enter Hyp mode. The change into Hyp mode is done by doing an
exception return from Mon. This doesn't work with current QEMU.
The problem is that in bad_mode_switch() we refuse to allow
the change of mode.
Note that bad_mode_switch() is used to do validation for two situations:
(1) changes to mode by instructions writing to CPSR.M
(ie not exception take/return) -- this corresponds to the
Armv8 Arm ARM pseudocode Arch32.WriteModeByInstr
(2) changes to mode by exception return
Attempting to enter or leave Hyp mode via case (1) is forbidden in
v8 and UNPREDICTABLE in v7, and QEMU is correct to disallow it
there. However, we're already doing that check at the top of the
bad_mode_switch() function, so if that passes then we should allow
the case (2) exception return mode changes to switch into Hyp mode.
We want to test whether we're trying to return to the nonexistent
"secure Hyp" mode, so we need to look at arm_is_secure_below_el3()
rather than arm_is_secure(), since the latter is always true if
we're in Mon (EL3).
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190109152430.32359-1-agraf@suse.de
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJcM36AAAoJEDwlJe0UNgzepuMP/A6umcXRrO+vOZgkW+cvJ8cD
JkDdb8H/u3S6zqNokABI3Ya/areX1P30sRV7e7mC5IsknVNZe0MqQX6TW5477HMP
Oz/m1AbyByWMLVILFiWfte5dtRRLfs3axzrmhu6HwJXe0NIUiYQofoJzCZEDMxDn
71cehgeNkUGA36HViPyqzHZYADFkCX3Tfmh1FEh2jD7taK9GNsff8p6cHTb05W7d
wWk68PS8VKTb5VrYH6SyiAHW8gBVrrUkYlkPKHzemK5fwlgDOSfxVLthf8mo08SH
QxEXI430tagdmrGNO/nKOTA2NQwMzvCk/OLf0Qwg9I9F9pYtiOJ7nXXbtqDC8eKy
DdHsL57W0F7sFkoVt+YNHSeylyLRluDh+D+Q7OHnlvwsEYmecqsWkW/A2CYC0uWs
8ajxPBNpGG1lIvo63YK5/4kOy0DE/6ISljYOSlYYg3iXeAZPkQZMTlUxoYmJQ+Zr
h1tLg1N9SuyQK5g5Uuluw2GwgzIv/Bt1LFo7pnvsA2X6PKiv6nno40T8q0Lw6ah4
lmAUWx0OUilTrvQwterHlr6hfWu2RLiRoxCg06a3C93YlRjsR3vZOBeQ5ByaE+ho
5ItKn58EerO+UaweVoc6MDhJFPC8b16Eee281BCec8Ks4GR1tIcpP/0z2lUwhBu6
hoPmkoPtFtu1dKBgF8Ma
=x1jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging
target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
# gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits)
Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.
hw/misc/tz-mpc: Fix value of BLK_MAX register
target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
arm: Add Clock peripheral stub to NRF51 SOC
tests/microbit-test: Add Tests for nRF51 Timer
arm: Instantiate NRF51 Timers
hw/timer/nrf51_timer: Add nRF51 Timer peripheral
tests/microbit-test: Add Tests for nRF51 GPIO
arm: Instantiate NRF51 general purpose I/O
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
arm: Instantiate NRF51 random number generator
hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
arm: Add header to host common definition for nRF51 SOC peripherals
qtest: Add set_irq_in command to set IRQ/GPIO level
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
cpus.c: Fix race condition in cpu_stop_current()
MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/
hw/arm: versal: Plug memory leaks
Revert "armv7m: Guard against no -kernel argument"
arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that MTTCG is here, the comment in the 32-bit Arm decoder that
"Since the emulation does not have barriers, the acquire/release
semantics need no special handling" is no longer true. Emit the
correct barriers for the load-acquire/store-release insns, as
we already do in the A64 decoder.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
While brk[ab] zeroing has a flags setting option, the merging variant
does not. Retain the same argument structure, to share expansion but
force the flag zero and do not decode bit 22.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181226215003.31438-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use "register" TBFLAG_ANY to indicate shared state between
A32 and A64, and "registers" TBFLAG_A32 & TBFLAG_A64 for
fields that are specific to the given cpu state.
Move ARM_TBFLAG_BE_DATA to shared state, instead of its current
placement within "Bit usage when in AArch32 state".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181218164348.7127-1-richard.henderson@linaro.org
[PMM: removed the renaming of BE_DATA flag to BE]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace arm_cpu_post_init() instance callback by calling it from leaf
classes, to avoid potential ordering issue with other post_init callbacks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
The timer_new() function allocates memory; this means that
if we call it in the CPU's init method we would need
to provide an instance_finalize method to free it. Defer
the timer creation to the realize function instead.
This fixes a memory leak spotted by clang LeakSanitizer
when a CPU object is created for introspection.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181204132952.2601-6-peter.maydell@linaro.org
When we add a new entry to the ARMCPRegInfo hash table in
add_cpreg_to_hashtable(), we allocate memory for tehe
ARMCPRegInfo struct itself, and we also g_strdup() the
name string. So the hashtable's value destructor function
must free the name string as well as the struct.
Spotted by clang's leak sanitizer. The leak here is a
small one-off leak at startup, because we don't support
CPU hotplug, and so the only time when we destroy
hash table entries is for the case where ARM_CP_OVERRIDE
means we register a wildcard entry and then override it later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-2-peter.maydell@linaro.org
Provide a trivial implementation with zero limited ordering regions,
which causes the LDLAR and STLLR instructions to devolve into the
LDAR and STLR instructions from the base ARMv8.0 instruction set.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since arm_hcr_el2_eff includes a check against
arm_is_secure_below_el3, we can often remove a
nearby check against secure state.
In some cases, sort the call to arm_hcr_el2_eff
to the end of a short-circuit logical sequence.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace arm_hcr_el2_{fmo,imo,amo} with a more general routine
that also takes SCR_EL3.NS (aka arm_is_secure_below_el3) into
account, as documented for the plethora of bits in HCR_EL2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The bulk of the work here, beyond base HPD, is defining the
TTBCR2 register. In addition we must check TTBCR.T2E, which
is not present (RES0) for AArch64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the TCR_*.HPD bits were RES0 in ARMv8.0, we can simply
interpret the bits as if ARMv8.1-HPD is present without checking.
We will need a slightly different check for hpd for aarch32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because EL3 has a fixed execution mode, we can properly decide
which of the bits are RES{0,1}.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The enable for TGE has already occurred within arm_hcr_el2_amo
and friends. Moreover, when E2H is also set, the sense is
supposed to be reversed, which has also already occurred within
the helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Post v8.4 bits taken from SysReg_v85_xml-00bet8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Post v8.3 bits taken from SysReg_v85_xml-00bet8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the same time, define the fields for these registers,
and use those defines in arm_pamax().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed up typo (s/achf/ahcf/) belatedly spotted by RTH]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang 3.4 does not know the "flatten" attribute yet. We've already
introduced the QEMU_FLATTEN macro for this in commit 97ff87c0ed,
so use this macro now here, too, to fix this issue.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1543399094-2260-1-git-send-email-thuth@redhat.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because they are supposed to remain const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit fixes a case where the CPU would try to go to EL3 when
executing an smc instruction, even though ARM_FEATURE_EL3 is false. This
case is raised when the PSCI conduit is set to smc, but the smc
instruction does not lead to a valid PSCI call.
QEMU crashes with an assertion failure latter on because of incoherent
mmu_idx.
This commit refactors the pre_smc helper by enumerating all the possible
way of handling an scm instruction, and covering the previously missing
case leading to the crash.
The following minimal test would crash before this commit:
.global _start
.text
_start:
ldr x0, =0xdeadbeef ; invalid PSCI call
smc #0
run with the following command line:
aarch64-linux-gnu-gcc -nostdinc -nostdlib -Wl,-Ttext=40000000 \
-o test test.s
qemu-system-aarch64 -M virt,virtualization=on,secure=off \
-cpu cortex-a57 -kernel test
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20181117160213.18995-1-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181113180154.17903-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Assert that the value to be written is the correct size.
No change in functionality here, just mirroring the same
function from kvm64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181113180154.17903-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181113180154.17903-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ID registers are replacing (some of) the feature bits.
We need (some of) these values to determine the set of data
to be handled during migration.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181113180154.17903-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-A15 and Cortex-A7 both have EL2; now we've implemented
it properly we can enable the feature bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181109173553.22341-3-peter.maydell@linaro.org
Hyp mode is an exception to the general rule that each AArch32
mode has its own r13, r14 and SPSR -- it has a banked r13 and
SPSR but shares its r14 with User and System mode. We were
incorrectly implementing it as banked, which meant that on
entry to Hyp mode r14 was 0 rather than the USR/SYS r14.
We provide a new function r14_bank_number() which is like
the existing bank_number() but provides the index into
env->banked_r14[]; bank_number() provides the index to use
for env->banked_r13[] and env->banked_cpsr[].
All the points in the code that were using bank_number()
to index into env->banked_r14[] are updated for consintency:
* switch_mode() -- this is the only place where we fix
an actual bug
* aarch64_sync_32_to_64() and aarch64_sync_64_to_32():
no behavioural change as we already special-cased Hyp R14
* kvm32.c: no behavioural change since the guest can't ever
be in Hyp mode, but conceptually the right thing to do
* msr_banked()/mrs_banked(): we can never get to the case
that accesses banked_r14[] with tgtmode == ARM_CPU_MODE_HYP,
so no behavioural change
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109173553.22341-2-peter.maydell@linaro.org
In commit 8a0fc3a29f we tried to implement HCR_EL2.{VI,VF},
but we got it wrong and had to revert it.
In that commit we implemented them as simply tracking whether there
is a pending virtual IRQ or virtual FIQ. This is not correct -- these
bits cause a software-generated VIRQ/VFIQ, which is distinct from
whether there is a hardware-generated VIRQ/VFIQ caused by the
external interrupt controller. So we need to track separately
the HCR_EL2 bit state and the external virq/vfiq line state, and
OR the two together to get the actual pending VIRQ/VFIQ state.
Fixes: 8a0fc3a29f
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181109134731.11605-4-peter.maydell@linaro.org
Currently we track the state of the four irq lines from the GIC
only via the cs->interrupt_request or KVM irq state. That means
that we assume that an interrupt is asserted if and only if the
external line is set. This assumption is incorrect for VIRQ
and VFIQ, because the HCR_EL2.{VI,VF} bits allow assertion
of VIRQ and VFIQ separately from the state of the external line.
To handle this, start tracking the state of the external lines
explicitly in a CPU state struct field, as is common practice
for devices.
The complicated part of this is dealing with inbound migration
from an older QEMU which didn't have this state. We assume in
that case that the older QEMU did not implement the HCR_EL2.{VI,VF}
bits as generating interrupts, and so the line state matches
the current state in cs->interrupt_request. (This is not quite
true between commit 8a0fc3a29f and its revert, but
that commit is broken and never made it into any released QEMU
version.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109134731.11605-3-peter.maydell@linaro.org
This reverts commit 8a0fc3a29f.
The implementation of HCR.VI and VF in that commit is not
correct -- they do not track the overall "is there a pending
VIRQ or VFIQ" status, but whether there is a pending interrupt
due to "this mechanism", ie the hypervisor having set the VI/VF
bits. The overall pending state for VIRQ and VFIQ is effectively
the logical OR of the inbound lines from the GIC with the
VI and VF bits. Commit 8a0fc3a29f would result in pending
VIRQ/VFIQ possibly being lost when the hypervisor wrote to HCR.
As a preliminary to implementing the HCR.VI/VF feature properly,
revert the broken one entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181109134731.11605-2-peter.maydell@linaro.org
The test was incomplete and incorrectly caused debug exceptions to be
generated when returning to EL2 after a failed attempt to single-step
an EL1 instruction. Fix this while cleaning up the function a little.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have this symbol defined so lets use it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we are debugging the guest all exceptions come our way but might
be for the guest's own debug exceptions. We use the ->do_interrupt()
infrastructure to inject the exception into the guest. However, we are
missing a full setup of the exception structure, causing an assert
later down the line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-4-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the assertion failure when running interrupts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-3-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This only fails with some (broken) versions of gdb but we should
treat the top bits of DBGBVR as RESS. Properly sign extend QEMU's
reference copy of dbgbvr and also update the register descriptions in
the comment.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This would cause an infinite recursion or loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181110121711.15257-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove a TODO comment about implementing the vectored interrupt
controller. We have had an implementation of that for a decade;
it's in hw/intc/pl190.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181106164118.16184-1-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Before we supported direct execution from MMIO regions, we
implemented workarounds in commit 7204243599
which let us avoid doing so, even if the SAU or MPU region
was less than page-sized.
Once we implemented execute-from-MMIO, we removed part
of those workarounds in commit d4b6275df320cee76; but
we forgot the one in get_phys_addr_pmsav8() which
suppressed use of small SAU regions in executable regions.
Remove that workaround now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181106163801.14474-1-peter.maydell@linaro.org
ATS1HR and ATS1HW (which allow AArch32 EL2 to do address translations
on the EL2 translation regime) were implemented in commit 14db7fe09a.
However, we got them wrong: these should do stage 1 address translations
as defined for NS-EL2, which is ARMMMUIdx_S1E2. We were incorrectly
making them perform stage 2 translations.
A few years later in commit 1313e2d7e2 we forgot entirely that
we'd implemented ATS1Hx, and added a comment that ATS1Hx were
"not supported yet". Remove the comment; there is no extra code
needed to handle these operations in do_ats_write(), because
arm_s1_regime_using_lpae_format() returns true for ARMMMUIdx_S1E2,
which forces 64-bit PAR format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-3-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In do_ats_write() we construct a PAR value based on the result
of the translation. A comment says "S2WLK and FSTAGE are always
zero, because we don't implement virtualization".
Since we do in fact now implement virtualization, add the missing
code that sets these bits based on the reported ARMMMUFaultInfo.
(These bits are named PTW and S in ARMv8, so we follow that
convention in the new comments in this patch.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-2-peter.maydell@linaro.org
In handle_vec_simd_shli() we have a check:
if (size > 3 && !is_q) {
unallocated_encoding(s);
return;
}
However this can never be true, because we calculate
int size = 32 - clz32(immh) - 1;
where immh is a 4 bit field which we know cannot be all-zeroes.
So the clz32() return must be in {28,29,30,31} and the resulting
size is in {0,1,2,3}, and "size > 3" is never true.
This unnecessary code confuses Coverity's analysis:
in CID 1396476 it thinks we might later index off the
end of an array because the condition implies that we
might have a size > 3.
Remove the code, and instead assert that the size is in [0..3],
since the decode that enforces that is somewhat distant from
this function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181030162517.21816-1-peter.maydell@linaro.org
When populating id registers from kvm, on a host that doesn't support
aarch32 mode at all, neither arm_div nor jazelle will be supported either.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181102102025.3546-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows trans_* expanders to be shared between decoders
for 32 and 16-bit insns, by not tying the expander to the
size of the insn that produced it.
This change requires adjusting the two existing users to match.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since QEMU does not implement ASIDs, changes to the ASID must flush the
tlb. However, if the ASID does not change there is no reason to flush.
In testing a boot of the Ubuntu installer to the first menu, this reduces
the number of flushes by 30%, or nearly 600k instances.
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181019015617.22583-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL3 version of this register does not include an ASID,
and so the tlb_flush performed by vmsa_ttbr_write is not needed.
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181019015617.22583-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of shifts and masks, use direct loads and stores from
the neon register file.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For a sequence of loads or stores from a single register,
little-endian operations can be promoted to an 8-byte op.
This can reduce the number of operations by a factor of 8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-20-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of shifts and masks, use direct loads and stores from the neon
register file. Mirror the iteration structure of the ARM pseudocode
more closely. Correct the parameters of the VLD2 A2 insn.
Note that this includes a bugfix for handling of the insn
"VLD2 (multiple 2-element structures)" -- we were using an
incorrect stride value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-19-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-18-richard.henderson@linaro.org
[PMM: added parens in ?: expression]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move cmtst_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move mla_op and mls_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move shi_op and sli_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move ssra_op and usra_op expanders from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move expanders for VBSL, VBIT, and VBIF from translate-a64.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also introduces neon_element_offset to find the env offset
of a specific element within a neon register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181011205206.3552-6-richard.henderson@linaro.org
[PMM: drop change to now-deleted cpu_mode_names array]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For a sequence of loads or stores from a single register,
little-endian operations can be promoted to an 8-byte op.
This can reduce the number of operations by a factor of 8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011205206.3552-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is done generically in translator_loop.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181011205206.3552-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This can reduce the number of opcodes required for certain
complex forms of load-multiple (e.g. ld4.16b).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 20181011205206.3552-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For traps of FP/SIMD instructions to AArch32 Hyp mode, the syndrome
provided in HSR has more information than is reported to AArch64.
Specifically, there are extra fields TA and coproc which indicate
whether the trapped instruction was FP or SIMD. Add this extra
information to the syndromes we construct, and mask it out when
taking the exception to AArch64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-11-peter.maydell@linaro.org
For the v7 version of the Arm architecture, the IL bit in
syndrome register values where the field is not valid was
defined to be UNK/SBZP. In v8 this is RES1, which is what
QEMU currently implements. Handle the desired v7 behaviour
by squashing the IL bit for the affected cases:
* EC == EC_UNCATEGORIZED
* prefetch aborts
* data aborts where ISV is 0
(The fourth case listed in the v8 Arm ARM DDI 0487C.a in
section G7.2.70, "illegal state exception", can't happen
on a v7 CPU.)
This deals with a corner case noted in a comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-10-peter.maydell@linaro.org
Create and use a utility function to extract the EC field
from a syndrome, rather than open-coding the shift.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-9-peter.maydell@linaro.org
If the HCR_EL2 PTW virtualizaiton configuration register bit
is set, then this means that a stage 2 Permission fault must
be generated if a stage 1 translation table access is made
to an address that is mapped as Device memory in stage 2.
Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-8-peter.maydell@linaro.org
The HCR_EL2 VI and VF bits are supposed to track whether there is
a pending virtual IRQ or virtual FIQ. For QEMU we store the
pending VIRQ/VFIQ status in cs->interrupt_request, so this means:
* if the register is read we must get these bit values from
cs->interrupt_request
* if the register is written then we must write the bit
values back into cs->interrupt_request
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-7-peter.maydell@linaro.org
The A/I/F bits in ISR_EL1 should track the virtual interrupt
status, not the physical interrupt status, if the associated
HCR_EL2.AMO/IMO/FMO bit is set. Implement this, rather than
always showing the physical interrupt status.
We don't currently implement anything to do with external
aborts, so this applies only to the I and F bits (though it
ought to be possible for the outer guest to present a virtual
external abort to the inner guest, even if QEMU doesn't
emulate physical external aborts, so there is missing
functionality in this area).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-6-peter.maydell@linaro.org
The HCR.DC virtualization configuration register bit has the
following effects:
* SCTLR.M behaves as if it is 0 for all purposes except
direct reads of the bit
* HCR.VM behaves as if it is 1 for all purposes except
direct reads of the bit
* the memory type produced by the first stage of the EL1&EL0
translation regime is Normal Non-Shareable,
Inner Write-Back Read-Allocate Write-Allocate,
Outer Write-Back Read-Allocate Write-Allocate.
Implement this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-5-peter.maydell@linaro.org
The HCR.FB virtualization configuration register bit requests that
TLB maintenance, branch predictor invalidate-all and icache
invalidate-all operations performed in NS EL1 should be upgraded
from "local CPU only to "broadcast within Inner Shareable domain".
For QEMU we NOP the branch predictor and icache operations, so
we only need to upgrade the TLB invalidates:
AArch32 TLBIALL, TLBIMVA, TLBIASID, DTLBIALL, DTLBIMVA, DTLBIASID,
ITLBIALL, ITLBIMVA, ITLBIASID, TLBIMVAA, TLBIMVAL, TLBIMVAAL
AArch64 TLBI VMALLE1, TLBI VAE1, TLBI ASIDE1, TLBI VAAE1,
TLBI VALE1, TLBI VAALE1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-4-peter.maydell@linaro.org
The switch_mode() function is defined in target/arm/helper.c and used
only in that file and nowhere else, so we can make it file-local
rather than global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-3-peter.maydell@linaro.org
For AArch32, exception return happens through certain kinds
of CPSR write. We don't currently have any CPU_LOG_INT logging
of these events (unlike AArch64, where we log in the ERET
instruction). Add some suitable logging.
This will log exception returns like this:
Exception return from AArch32 hyp to usr PC 0x80100374
paralleling the existing logging in the exception_return
helper for AArch64 exception returns:
Exception return from AArch64 EL2 to AArch64 EL0 PC 0x8003045c
Exception return from AArch64 EL2 to AArch32 EL0 PC 0x8003045c
(Note that an AArch32 exception return can only be
AArch32->AArch32, never to AArch64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-2-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having V6 alone imply jazelle was wrong for cortex-m0.
Change to an assertion for V6 & !M.
This was harmless, because the only place we tested ARM_FEATURE_JAZELLE
was for 'bxj' in disas_arm(), which is unreachable for M-profile cores.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case. Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiating mps2-an505 (cortex-m33) will fail make check when
V7VE asserts that ID_ISAR0.Divide includes ARM division. It is
also wrong to include ARM_FEATURE_LPAE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create struct ARMISARegisters, to be accessed during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch extends the qemu-kvm state sync logic with support for
KVM_GET/SET_VCPU_EVENTS, giving access to yet missing SError exception.
And also it can support the exception state migration.
The SError exception states include SError pending state and ESR value,
the kvm_put/get_vcpu_events() will be called when set or get system
registers. When do migration, if source machine has SError pending,
QEMU will do this migration regardless whether the target machine supports
to specify guest ESR value, because if target machine does not support that,
it can also inject the SError with zero ESR value.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1538067351-23931-3-git-send-email-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The get_phys_addr() functions take a pointer to an ARMMMUFaultInfo
struct, which they fill in only if a fault occurs. This means that
the caller must always zero-initialize the struct before passing
it in. We forgot to do this in v7m_stack_read() and v7m_stack_write().
Correct the error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011172057.9466-1-peter.maydell@linaro.org
This is an amendment to my earlier patch:
commit 7ece99b17e
Author: Aaron Lindsay <alindsay@codeaurora.org>
Date: Thu Apr 26 11:04:39 2018 +0100
target/arm: Mask PMU register writes based on PMCR_EL0.N
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-3-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I previously fixed this for PMINTENSET_EL1, but missed these.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-2-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the ARM Cortex-A72.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-11-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When QEMU provides the equivalent of the EL3 firmware, we
need to enable HVCs in scr_el3 when turning on CPUs that
target EL2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-10-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The incorrect value advertised only thumb2 div without arm div.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The missing nibble made it more difficult to read.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present we assert:
arm_el_is_aa64: Assertion `el >= 1 && el <= 3' failed.
The comment in arm_el_is_aa64 explains why asking about EL0 without
extra information is impossible. Add an extra argument to provide
it from the surrounding context.
Fixes: 0ab5953b00
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Updating the NS stack pointer via MSR to SP_NS should include
a check whether the new SP value is below the stack limit.
No other kinds of update to the various stack pointer and
limit registers via MSR should perform a check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-14-peter.maydell@linaro.org
Add the v8M stack checks for the VLDM/VSTM
(aka VPUSH/VPOP) instructions. This code is currently
unreachable because we haven't yet implemented M profile
floating point support, but since the change is simple,
we add it now because otherwise we're likely to forget to
do it later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-13-peter.maydell@linaro.org
Add v8M stack checks for the 16-bit Thumb push/pop
encodings: STMDB, STMFD, LDM, LDMIA, LDMFD.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-12-peter.maydell@linaro.org
Add v8M stack checks for the instructions in the T32
"load/store single" encoding class: these are the
"immediate pre-indexed" and "immediate, post-indexed"
LDR and STR instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-11-peter.maydell@linaro.org
Add the v8M stack checks for:
* LDM (T2 encoding)
* STM (T2 encoding)
This includes the 32-bit encodings of the instructions listed
in v8M ARM ARM rule R_YVWT as
* LDM, LDMIA, LDMFD
* LDMDB, LDMEA
* POP (multiple registers)
* PUSH (muliple registers)
* STM, STMIA, STMEA
* STMDB, STMFD
We perform the stack limit before doing any other part
of the load or store.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-10-peter.maydell@linaro.org
Add the v8M stack checks for:
* LDRD (immediate)
* STRD (immediate)
Loads and stores are more complicated than ADD/SUB/MOV, because we
must ensure that memory accesses below the stack limit are not
performed, so we can't simply do the check when we actually update
SP.
For these instructions, if the stack limit check triggers
we must not:
* perform any memory access below the SP limit
* update PC, SP or the load/store base register
but it is IMPDEF whether we:
* perform any accesses above or equal to the SP limit
* update destination registers for loads
For QEMU we choose to always check the limit before doing any other
part of the load or store, so we won't update any registers or
perform any memory accesses.
It is UNKNOWN whether the limit check triggers for a load or store
where the initial SP value is below the limit and one of the stores
would be below the limit, but the writeback moves SP to above the
limit. For QEMU we choose to trigger the check in this situation.
Note that limit checks happen only for loads and stores which update
SP via writeback; they do not happen for loads and stores which
simply use SP as a base register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-9-peter.maydell@linaro.org
Check the v8M stack limits when pushing the frame for a
non-secure function call via BLXNS.
In order to be able to generate the exception we need to
promote raise_exception() from being local to op_helper.c
so we can call it from helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-8-peter.maydell@linaro.org
Add checks for breaches of the v8M stack limit when the
stack pointer is decremented to push the exception frame
for exception entry.
Note that the exception-entry case is unique in that the
stack pointer is updated to be the limit value if the limit
is hit (per rule R_ZLZG).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-7-peter.maydell@linaro.org
Add some comments to the Thumb decoder indicating what bits
of the instruction have been decoded at various points in
the code.
This is not an exhaustive set of comments; we're gradually
adding comments as we work with particular bits of the code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-6-peter.maydell@linaro.org
Add code to insert calls to a helper function to do the stack
limit checking when we handle these forms of instruction
that write to SP:
* ADD (SP plus immediate)
* ADD (SP plus register)
* SUB (SP minus immediate)
* SUB (SP minus register)
* MOV (register)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-5-peter.maydell@linaro.org
We're going to want v7m_using_psp() in op_helper.c in the
next patch, so move it from helper.c to internals.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-4-peter.maydell@linaro.org
Define EXCP_STKOF, and arrange for it to cause us to take
a UsageFault with CFSR.STKOF set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-3-peter.maydell@linaro.org
The Arm v8M architecture includes hardware stack limit checking.
When certain instructions update the stack pointer, if the new
value of SP is below the limit set in the associated limit register
then an exception is taken. Add a TB flag that tracks whether
the limit-checking code needs to be emitted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181002163556.10279-2-peter.maydell@linaro.org
There is quite a lot of code required to compute cpu_mem_index,
or even put together the full TCGMemOpIdx. This can easily be
done at translation time.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This implements the feature for softmmu, and moves the
main loop out of a macro and into a function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can choose the endianness at translation time, rather than
re-computing it at execution time.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can choose the endianness at translation time, rather than
re-computing it at execution time.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the endianness problem for softmmu, and moves the
main loop out of a macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the same *_tlb primitives as we use for ld1.
For linux-user, this hoists the set of helper_retaddr. For softmmu,
hoists the computation of the current mmu_idx outside the loop,
fixes the endianness problem, and moves the main loop out of a
macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Uses tlb_vaddr_to_host for correct operation with softmmu.
Optimize for accesses within a single page or pair of pages.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 16-byte load only uses 16 predicate bits. But while
reusing the other load infrastructure, we find other bits
that are set and trigger an assert. To avoid this and
retain the assert, zero-extend the predicate that we pass
to the LD1 helper.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the existing helpers to determine if (1) the fpu is enabled,
(2) sve state is enabled, and (3) the current sve vector length.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SVE vector length can change when changing EL, or when writing
to one of the ZCR_ELn registers.
For correctness, our implementation requires that predicate bits
that are inaccessible are never set. Which means noticing length
changes and zeroing the appropriate register bits.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to want to determine whether sve is enabled
for EL other than current.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for EL3 before testing CPTR_EL3.EZ. Return 0 when the exception
should be routed via AdvSIMDFPAccessTrap. Mirror the structure of
CheckSVEEnabled more closely.
Fixes: 5be5e8eda7
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that the only field defined for this new register may only
be 0, we don't actually need to change anything except the name.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A cut-and-paste error meant we were reading r4 from the v8M
callee-saves exception stack frame twice. This is harmless
since it just meant we did two memory accesses to the same
location, but it's unnecessary. Delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002150304.2287-1-peter.maydell@linaro.org
In v7m_exception_taken() we were incorrectly using a
"LR bit EXCRET.ES is 1" check when it should be 0
(compare the pseudocode ExceptionTaken() function).
This meant we didn't stack the callee-saved registers
when tailchaining from a NonSecure to a Secure exception.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002145940.30931-1-peter.maydell@linaro.org
The parameter of kvm_arm_init_cpreg_list() is ARMCPU instead of
CPUState, so correct the note to make it match the code.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 1538069046-5757-1-git-send-email-gengdongjiu@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv8 architecture defines that an AArch32 CPU starts
in SVC mode, unless EL2 is the highest available EL, in
which case it starts in Hyp mode. (In ARMv7 a CPU with EL2
but not EL3 was not a valid configuration, but we don't
specifically reject this if the user asks for one.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20180823135047.16525-1-peter.maydell@linaro.org
Not only are the sve-related tb_flags fields unused when SVE is
disabled, but not all of the cpu registers are initialized properly
for computing same. This can corrupt other fields by ORing in -1,
which might result in QEMU crashing.
This bug was not present in 3.0, but this patch is cc'd to
stable because adf92eab90 where the bug was
introduced was marked for stable.
Fixes: adf92eab90
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following the bulk conversion of the iwMMXt code, there are
just a handful of hard coded tabs in target/arm; fix them.
This is a whitespace-only patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180821165215.29069-4-peter.maydell@linaro.org
Untabify the arm iwmmxt_helper.c. This affects only the iwMMXt code.
We've never touched that code in years, so it's not going to get
fixed up by our "change when touched" process, and a bulk change is
not going to be too disruptive.
This commit was produced using Emacs "untabify" (plus one
by-hand removal of a space to fix a checkpatch nit); it is
a whitespace-only change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180821165215.29069-3-peter.maydell@linaro.org
Untabify the arm translate.c. This affects only some lines,
mostly comments, in the iwMMXt code. We've never touched
that code in years, so it's not going to get fixed up
by our "change when touched" process, and a bulk change
is not going to be too disruptive.
This commit was produced using Emacs "untabify"; it is
a whitespace-only change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180821165215.29069-2-peter.maydell@linaro.org
On 32-bit exception entry, CPSR.J must always be set to 0
(see v7A Arm ARM DDI0406C.c B1.8.5). CPSR.IL must also
be cleared on 32-bit exception entry (see v8A Arm ARM
DDI0487C.a G1.10).
Clear these bits. (This fixes a bug which will never be noticed
by non-buggy guests.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-6-peter.maydell@linaro.org
Implement the necessary support code for taking exceptions
to Hyp mode in AArch32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-5-peter.maydell@linaro.org
Factor out the code which changes the CPU state so as to
actually take an exception to AArch32. We're going to want
to use this for handling exception entry to Hyp mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-4-peter.maydell@linaro.org
The AArch32 HCR and HCR2 registers alias HCR_EL2
bits [31:0] and [63:32]; implement them.
Since HCR2 exists in ARMv8 but not ARMv7, we need new
regdef arrays for "we have EL3, not EL2, we're ARMv8"
and "we have EL2, we're ARMv8" to hold the definitions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-3-peter.maydell@linaro.org
The v8 AArch32 HACTLR2 register maps to bits [63:32] of ACTLR_EL2.
We implement ACTLR_EL2 as RAZ/WI, so make HACTLR2 also RAZ/WI.
(We put the regdef next to ACTLR_EL2 as a reminder in case we
ever make ACTLR_EL2 something other than RAZ/WI).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-2-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many of these are marked as "intentional/fix required" because they
just need adding a fall through comment. This is exactly what this
patch does, except for target/mips/translate.c where it is easier to
duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox
sources and decide to just remove the LOG_UNIMP before the fallthrough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARMv7VE introduced the ERET instruction, which is necessary to
return from an exception taken to Hyp mode. Implement this.
In A32 encoding it is a completely new encoding; in T32 it
is an adjustment of the behaviour of the existing
"SUBS PC, LR, #<imm8>" instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-10-peter.maydell@linaro.org
The MSR (banked) and MRS (banked) instructions allow accesses to ELR_Hyp
from either Monitor or Hyp mode. Our translate time check
was overly strict and only permitted access from Monitor mode.
The runtime check we do in msr_mrs_banked_exc_checks() had the
correct code in it, but never got there because of the earlier
"currmode == tgtmode" check. Special case ELR_Hyp.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-9-peter.maydell@linaro.org
The AArch32 HSR is the equivalent of AArch64 ESR_EL2;
we can implement it by marking our existing ESR_EL2 regdef
as STATE_BOTH. It also needs to be "RES0 from EL3 if
EL2 not implemented", so add the missing stanza to
el3_no_el2_cp_reginfo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-8-peter.maydell@linaro.org
The AArch32 virtualization extensions support these fault address
registers:
* HDFAR: aliased with AArch64 FAR_EL2[31:0] and AArch32 DFAR(S)
* HIFAR: aliased with AArch64 FAR_EL2[63:32] and AArch32 IFAR(S)
Implement the accessors for these. This fixes in passing a bug
where we weren't implementing the "RES0 from EL3 if EL2 not
implemented" behaviour for AArch64 FAR_EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-7-peter.maydell@linaro.org
Implement the AArch32 HVBAR register; we can do this just by
making the existing VBAR_EL2 regdefs be STATE_BOTH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-5-peter.maydell@linaro.org
ARMCPRegInfo structs will default to .cp = 15 if they
are ARM_CP_STATE_BOTH, but not if they are ARM_CP_STATE_AA32
(because a coprocessor number of 0 is valid for AArch32).
We forgot to explicitly set .cp = 15 for the HMAIR1 and
HAMAIR1 regdefs, which meant they would UNDEF when the guest
tried to access them under cp15.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-3-peter.maydell@linaro.org
We implement the HAMAIR1 register as RAZ/WI; we had a typo in the
regdef, though, and were incorrectly naming it HMAIR1 (which is
a different register which we also implement as RAZ/WI).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-2-peter.maydell@linaro.org
If an instruction is conditional (like CBZ) and it is executed
conditionally (using the ITx instruction), a jump to an undefined
label is generated, and QEMU crashes.
CBZ in IT block is an UNPREDICTABLE behavior, but we should not
crash. Honouring the condition code is allowed by the spec in this
case (constrained unpredictable, ARMv8, section K1.1.7), and matches
what we do for other "UNPREDICTABLE inside an IT block" instructions.
Fix the 'skip on condition' code to create a new label only if it
does not already exist. Previously multiple labels were created, but
only the last one of them was set.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180816120533.6587-1-rka@sysgo.com
[PMM: fixed ^ 1 being applied to wrong argument, fixed typo]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These insns require u=1; failed to include that in the switch
cases. This probably happened during one of the rebases just
before final commit.
Fixes: d17b7cdcf4
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using the wrong flush-to-zero bit for the non-half input.
Fixes: 46d33d1e3c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16. The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.
Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a "cortex-m0" ARMv6-M CPU model.
Most of the register reset values set by other CPU models are not
relevant for the cut-down ARMv6-M architecture.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With PC, there are 33 registers. Three per line lines up nicely
without overflowing 80 columns.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The scaling should be solely on the memory operation size; the number
of registers being loaded does not come in to the initial computation.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The immediate should be scaled by the size of the memory reference,
not the size of the elements into which it is loaded.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The expression (int) imm + (uint32_t) len_align turns into uint32_t
and thus with negative imm produces a memory operation at the wrong
offset. None of the numbers involved are particularly large, so
change everything to use int.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pseudocode for this operation is an increment + compare loop,
so comparing <= the maximum integer produces an all-true predicate.
Rather than bound in both the inline code and the helper, pass the
helper the number of predicate bits to set instead of the number
of predicate elements to set.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Used the wrong temporary in the computation of subtractive overflow.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The normal vector element is sign-extended before
comparing with the wide vector element.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
