Indicate that 'MDTS and Size Limits Exclude Metadata (MEM)' in the
Controller Attributes (CTRATT) I/O Command Set Independent Identify
Controller Data Structure.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: updated commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
co_try_get_from_shres hasn't been used since it was added in
55fa54a789 ("co-shared-resource: protect with a mutex")
(Everyone uses the _locked version)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240918124220.27871-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
aio_task_pool_empty has been unused since it was added in
6e9b225f73 ("block: introduce aio task pool")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240917002007.330689-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
In the context of backup fleecing, discarding the source will not work
when the fleecing image has a larger granularity than the one used for
block-copy operations (can happen if the backup target has smaller
cluster size), because cbw_co_pdiscard_snapshot() will align down the
discard requests and thus effectively ignore then.
To make @discard-source work in such a scenario, allow specifying the
minimum cluster size used for block-copy operations and thus in
particular also the granularity for discard requests to the source.
The type 'size' (corresponding to uint64_t in C) is used in QAPI to
rule out negative inputs and for consistency with already existing
@cluster-size parameters. Since block_copy_calculate_cluster_size()
uses int64_t for its result, a check that the input is not too large
is added in block_copy_state_new() before calling it. The calculation
in block_copy_calculate_cluster_size() is done in the target int64_t
type.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240711120915.310243-2-f.ebner@proxmox.com>
[vsementsov: switch version to 9.2 in QAPI doc]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-26-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LegacyReset does not pass ResetType to the reset callback method, which
the new Resettable framework uses. Due to this, virtio-mem cannot use
the new RESET_TYPE_WAKEUP to skip the reset during wake-up from a
suspended state.
This patch adds overrides Resettable interface methods in VirtIOMEMClass
to use the new Resettable framework and replaces
qemu_[un]register_reset() calls with qemu_[un]register_resettable().
Message-ID: <20240904103722.946194-4-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Some devices need to distinguish cold start reset from waking up from a
suspended state. This patch adds new value to the enum, and updates the
i386 wakeup method to use this new reset type.
Message-ID: <20240904103722.946194-3-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Currently, both qemu_devices_reset() and MachineClass::reset() use
ShutdownCause for the reason of the reset. However, the Resettable
interface uses ResetState, so ShutdownCause needs to be translated to
ResetType somewhere. Translating it qemu_devices_reset() makes adding
new reset types harder, as they cannot always be matched to a single
ShutdownCause here, and devices may need to check the ResetType to
determine what to reset and if to reset at all.
This patch moves this translation up in the call stack to
qemu_system_reset() and updates all MachineClass children to use the
ResetType instead.
Message-ID: <20240904103722.946194-2-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
The 'GPL-2.0' license identifier has been deprecated since license
list version 3.0 [1] and replaced by the 'GPL-2.0-only' tag [2].
[1] https://spdx.org/licenses/GPL-2.0.html
[2] https://spdx.org/licenses/GPL-2.0-only.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0/GPL-2.0-only/ \
$(git grep -l 'SPDX-License-Identifier: GPL-2.0[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'GPL-2.0+' license identifier has been deprecated since license
list version 2.0rc2 [1] and replaced by the 'GPL-2.0-or-later' [2]
tag.
[1] https://spdx.org/licenses/GPL-2.0+.html
[2] https://spdx.org/licenses/GPL-2.0-or-later.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0+/GPL-2.0-or-later/ \
$(git grep -lP 'SPDX-License-Identifier: \W+GPL-2.0\+[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'LGPL-2.0+' license identifier has been deprecated since license
list version 2.0rc2 [1] and replaced by the 'LGPL-2.0-or-later' [2]
tag.
[1] https://spdx.org/licenses/LGPL-2.0+.html
[2] https://spdx.org/licenses/LGPL-2.0-or-later.html
Mechanical patch running:
$ sed -i -e s/LGPL-2.0+/LGPL-2.0-or-later/ \
$(git grep -l 'SPDX-License-Identifier: LGPL-2.0+$')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since the "2 | 3+" expression can be simplified as "2+",
it is pointless to mention the GPLv3 license.
Add the corresponding SPDX identifier to remove all doubt.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_get_exec_dir has been unused since commit:
5bebe03f51 ("util/cutils: Clean up global variable shadowing in get_relocated_path()")
Remove it, and fix up a comment that pointed to it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The last use of sysbus_mmio_unmap was removed by
981b1c6266 ("spapr/xive: rework the mapping the KVM memory regions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
envlist_parse, envlist_parse_set, envlist_parse_unset were added
in 2009 but never used, see:
04a6dfebb6 ("linux-user: Add generic env variable handling")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This value can be accessed only during a memory callback, using
new qemu_plugin_mem_get_value function.
Returned value can be extended when QEMU will support accesses wider
than 128 bits.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1719
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2152
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-6-alex.bennee@linaro.org>
Different code paths handle memory accesses:
- tcg generated code
- load/store helpers
- atomic helpers
This value is saved in cpu->neg.plugin_mem_value_{high,low}. Values are
written only for accessed word size (upper bits are not set).
Atomic operations are doing read/write at the same time, so we generate
two memory callbacks instead of one, to allow plugins to access distinct
values.
For now, we can have access only up to 128 bits, thus split this in two
64 bits words. When QEMU will support wider operations, we'll be able to
reconsider this.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-5-alex.bennee@linaro.org>
These were passing a NULL buffer pointer unconditionally, which happens
to behave in a mostly benign way (except for the chance of an excess
memory region unref and a bounce buffer leak). Per the function comment,
this was never meant to be accepted though, and triggers an assertion
with the "softmmu: Support concurrent bounce buffers" change.
Given that the code in question never sets up any mappings, just remove
the unnecessary dma_memory_unmap calls along with the DBDMA_io struct
fields that are now entirely unused.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Message-Id: <20240916175708.1829059-1-mnissler@rivosinc.com>
Fixes: be1e343995 ("macio: switch over to new byte-aligned DMA helpers")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
* Replace assert(0) and assert(false) in qtests and s390x code
* Enable the device aliases for or1k
* Some other small test improvements
-----BEGIN PGP SIGNATURE-----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=DXEK
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-09-17' of https://gitlab.com/thuth/qemu into staging
* Make all qtest targets work with "--without-default-devices"
* Replace assert(0) and assert(false) in qtests and s390x code
* Enable the device aliases for or1k
* Some other small test improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmbpWwwRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUj2A//VQwwbbuQa4FO/fu8mX0/iL43IZPLkVvC
# XPesidMwEsaNlfnUGLwjr9/F9sU7NXSkEdBWshU69ER9D4FPvRlZ6xOc0GB2HHEm
# 2zYBaQoMvB/g5/FMkp5/YqPc/FvYMxePTX0syJCUkdf9hbM3YJagUgSKaz/2ZJRu
# +wztsRMSGx9WBeabTWgbAtGlfEqtfSGdfFHbNtoEVmO/K3rvcAHJhPXZpSmdq4CV
# ymwYQ3Ul1Sdz/34TzshhkY9VvYU6n1zuB+kGrjPcQrOdBV/ukJuBiFkHfSZm/2ch
# zTqbdXvkds867vHMo9s3JeVKPa8ZytKn4ycXXgVS5AZtrnEnyHztlVHWbwbHSafF
# rVGXnE3FabzKL4sEKGzOjMegnwdWtpBNwMVKUZIgURqDXAVVR2m+lf2pW/Niz2WR
# m0LNIcg0NPvxPwuq1xLVHc3CLNSCszu4Ao5YRhKimf3hb+FvzHty3dxn+DDg4+Q4
# hHqQRcbWILhYJEwcAVkfaMTtCh/RESiNi0U7Teqvr+aqBsJP8kdCkE5rY7cqzrqn
# aDaompDZ8QG1QA1c3NaxtmNsvTvpm8gBySrqbMizo8UHQd85HDdXFkAZfI4HWKDi
# jhZAEyh1HLeXrgDT/D0WBWQdPLjDZewTvqgqT/A5XbdR1u4XYXcxwMCpIN1iKFoY
# 8qu0hIcsILM=
# =DXEK
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Sep 2024 11:33:48 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-09-17' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/crossbuilds.yml: Force 'make check' to -j2 for cross-i686-tci
tests/functional: Move the mips64el fuloong2e test into the thorough category
docs/fuzz: fix outdated mention to enable-sanitizers
system: Enable the device aliases for or1k, too
system: Sort QEMU_ARCH_VIRTIO_PCI definition
tests/qtest: remove break after g_assert_not_reached()
tests/qtest: replace assert(false) with g_assert_not_reached()
include/hw/s390x: replace assert(false) with g_assert_not_reached()
tests/unit: replace assert(0) with g_assert_not_reached()
tests/qtest: replace assert(0) with g_assert_not_reached()
gitlab: fix logic for changing docker tag on stable branches
.gitlab-ci.d/buildtest: Build most targets in the build-without-defaults job
tests/qtest: Disable numa-test if the default machine is not available
tests/qtest/meson.build: Add more CONFIG switches checks for the x86 tests
tests/qtest/hd-geo-test: Check for availability of "pc" machine before using it
tests/qtest/boot-order-test: Make the machine name mandatory in this test
tests/qtest/cdrom-test: Improve the machine detection in the cdrom test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-ID: <20240912073921.453203-15-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.
It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.
Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.
Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.
The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.
Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.
An I2C controller registers owns 8KB address space.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.
To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.
Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.
The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It only support continuous pool buffer memory region for all I2C bus.
However, the pool buffer address of all I2c bus are discontinuous
for AST2700.
Ex: the pool buffer address of I2C bus for ast2700 as following.
0x1A0 - 0x1BF: Device 0 buffer
0x2A0 - 0x2BF: Device 1 buffer
0x3A0 - 0x3BF: Device 2 buffer
0x4A0 - 0x4BF: Device 3 buffer
0x5A0 - 0x5BF: Device 4 buffer
0x6A0 - 0x6BF: Device 5 buffer
0x7A0 - 0x7BF: Device 6 buffer
0x8A0 - 0x8BF: Device 7 buffer
0x9A0 - 0x9BF: Device 8 buffer
0xAA0 - 0xABF: Device 9 buffer
0xBA0 - 0xBBF: Device 10 buffer
0xCA0 - 0xCBF: Device 11 buffer
0xDA0 - 0xDBF: Device 12 buffer
0xEA0 - 0xEBF: Device 13 buffer
0xFA0 – 0xFBF: Device 14 buffer
0x10A0 – 0x10BF: Device 15 buffer
Introduce a new class attribute to make user set each I2C bus
pool buffer gap size. Update formula to create all I2C bus
pool buffer memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
Besides, using a share pool buffer only support
pool buffer memory regions are continuous for all I2C bus.
To make this model more readable and support discontinuous
bus pool buffer memory regions, changes to introduce
a new bus pool buffer attribute in AspeedI2Cbus and
new memops. So, it does not need to calculate
the pool buffer offset for different I2C bus.
Introduce a new has_share_pool class attribute in AspeedI2CClass and
use it to create either a share pool buffer or bus pool buffers
in aspeed_i2c_realize. Update each pull buffer size to 0x10 for AST2500
and 0x20 for AST2600 and AST1030.
Incrementing the version of aspeed_i2c_bus_vmstate to 6.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
It only support continuous register memory region for all I2C bus.
However, the register address of all I2c bus are discontinuous
for AST2700.
Ex: the register address of I2C bus for ast2700 as following.
0x100 - 0x17F: Device 0
0x200 - 0x27F: Device 1
0x300 - 0x37F: Device 2
0x400 - 0x47F: Device 3
0x500 - 0x57F: Device 4
0x600 - 0x67F: Device 5
0x700 - 0x77F: Device 6
0x800 - 0x87F: Device 7
0x900 - 0x97F: Device 8
0xA00 - 0xA7F: Device 9
0xB00 - 0xB7F: Device 10
0xC00 - 0xC7F: Device 11
0xD00 - 0xD7F: Device 12
0xE00 - 0xE7F: Device 13
0xF00 – 0xF7F: Device 14
0x1000 – 0x107F: Device 15
Introduce a new class attribute to make user set each I2C bus gap size.
Update formula to create all I2C bus register memory regions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Ignore GUI keys for SDL_TEXTINPUT events, just like GUI keys are
ignored for SDL_KEYDOWN events. This prevents unintended text input
in a text console when hiding the text console with the GUI keys.
The SDL_TEXTINPUT event always comes after the SDL_KEYDOWN event.
See https://github.com/libsdl-org/SDL/issues/1659.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240909061552.6122-3-vr_qemu@t-online.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Each virtual console in the SDL2 frontend has a key state map.
When switching windows with GUI keys we have to release all
pressed modifier keys in the currently active window, because
after the switch the now inactive window no longer receives the
key release events.
To reproduce the issue open a text editor in the SDL UI and then
press Ctrl-Alt-2 to open a Compat Monitor Console. Close the
console with the mouse. Try to enter text in the text editor and
notice that the modifier keys Ctrl and Alt are stuck and need to
be pressed once to be released.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240909061552.6122-2-vr_qemu@t-online.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Update the Sun mouse implementation to use QemuInputHandler instead of the
legacy qemu_add_mouse_event_handler() function.
Note that this conversion adds extra sunmouse_* members to ESCCChannelState
but they are not added to the migration stream (similar to the Sun keyboard
members). If this were desired in future, the Sun devices should be split
into separate devices and added to the migration stream there instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2518
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Carl Hauser <chauser@pullman.com>
Message-ID: <20240904102301.175706-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This allows uses to peek the byte at the current head of the FIFO.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240828122258.928947-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a wrapper function around fifo8_peekpop_buf() that allows the
caller to peek into the FIFO, including handling the case where there
is a wraparound of the internal FIFO buffer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240828122258.928947-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since its introduction in commit cdbdb648b7 ("ARM Versatile
Platform Baseboard emulation.") PL011State::readbuff as never
been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-3-philmd@linaro.org>
The CRIS target is deprecated since v9.0 (commit c7bbef4023
"docs: mark CRIS support as deprecated").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-14-philmd@linaro.org>
We are about to remove the CRIS target, so remove
the sysemu part. This remove the CRIS 'none' machine.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-13-philmd@linaro.org>
We just removed the single machine calling etraxfs_dmac_init()
(the axis-dev88 machine).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-11-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-10-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-9-philmd@linaro.org>
As per the deprecation notice in commit c7bbef4023:
The CRIS architecture was pulled from Linux in 4.17 and
the compiler is no longer packaged in any distro making
it harder to run the `check-tcg` tests. Unless we can
improve the testing situation there is a chance the code
will bitrot without anyone noticing.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-5-philmd@linaro.org>
sh7750_register_io_device() was only used by the TC58128
NAND EEPROM which has been removed in the previous commit.
Remove it as unused code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20240903153959.18392-4-philmd@linaro.org>
The TC58128 NAND EEPROM is not user creatable and
needs to be instanciated in the code via tc58128_init().
Only the SHIX machine was using it, and it was removed
in the previous commit. Since the TC58128 has no more
users, remove it too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240903153959.18392-3-philmd@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Remove a pointless structure declaration in "designware.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20231012121857.31873-2-philmd@linaro.org>
This is preliminary work to split up hv_vm_create
logic per platform so we can support creating VMs
with > 64GB of RAM on Apple Silicon machines. This
is done via ARM HVF's hv_vm_config_create() (and
other APIs that modify this config that will be
coming in future patches). This should have no
behavioral difference at all as hv_vm_config_create()
just assigns the same default values as if you just
passed NULL to the function.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-3-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This addition will be necessary for some HVF related work to follow.
For HVF on ARM there exists a set of APIs in macOS 13 to be able to
adjust the IPA size for a given VM. This is useful as by default HVF
uses 36 bits as the IPA size, so to support guests with > 64GB of RAM
we'll need to reach for this.
To have all the info necessary to carry this out however, we need some
plumbing to be able to grab the memory map and compute the highest GPA
prior to creating the VM. This is almost exactly like what kvm_type is
used for on ARM today, and is also what this will be used for. We will
compute the highest GPA and find what IPA size we'd need to satisfy this,
and if it's valid (macOS today caps at 40b) we'll set this to be the IPA
size in coming patches. This new method is only needed (today at least)
on ARM, and obviously only for HVF/macOS, so admittedly it is much less
generic than kvm_type today, but it seemed a somewhat sane way to get
the information we need from the memmap at VM creation time.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-2-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed explicit setting of field to NULL on x86]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the data type of the ioctl _request_ argument from 'int' to
'unsigned long' for the various accel/kvm functions which are
essentially wrappers around the ioctl() syscall.
The correct type for ioctl()'s 'request' argument is confused:
* POSIX defines the request argument as 'int'
* glibc uses 'unsigned long' in the prototype in sys/ioctl.h
* the glibc info documentation uses 'int'
* the Linux manpage uses 'unsigned long'
* the Linux implementation of the syscall uses 'unsigned int'
If we wrap ioctl() with another function which uses 'int' as the
type for the request argument, then requests with the 0x8000_0000
bit set will be sign-extended when the 'int' is cast to
'unsigned long' for the call to ioctl().
On x86_64 one such example is the KVM_IRQ_LINE_STATUS request.
Bit requests with the _IOC_READ direction bit set, will have the high
bit set.
Fortunately the Linux Kernel truncates the upper 32bit of the request
on 64bit machines (because it uses 'unsigned int', and see also Linus
Torvalds' comments in
https://sourceware.org/bugzilla/show_bug.cgi?id=14362 )
so this doesn't cause active problems for us. However it is more
consistent to follow the glibc ioctl() prototype when we define
functions that are essentially wrappers around ioctl().
This resolves a Coverity issue where it points out that in
kvm_get_xsave() we assign a value (KVM_GET_XSAVE or KVM_GET_XSAVE2)
to an 'int' variable which can't hold it without overflow.
Resolves: Coverity CID 1547759
Signed-off-by: Johannes Stoelp <johannes.stoelp@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20240815122747.3053871-1-peter.maydell@linaro.org
[PMM: Rebased patch, adjusted commit message, included note about
Coverity fix, updated the type of the local var in kvm_get_xsave,
updated the comment in the KVMState struct definition]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We used to need the transitional_function machinery to handle bus
classes and device classes which still used their legacy reset
handling. We have now converted all bus classes to three phase
reset, and simplified the device class legacy reset so it is just an
adapting wrapper function around registration of a hold phase method.
There are therefore no more users of the transitional_function
machinery and we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240830145812.1967042-12-peter.maydell@linaro.org
Rename the DeviceClass::reset field to legacy_reset; this is helpful
both in flagging up that it's best not used in new code and in
making it easy to search for where it's being used still.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-9-peter.maydell@linaro.org
Define a device_class_set_legacy_reset() function which
sets the DeviceClass::reset field. This serves two purposes:
* it makes it clearer to the person writing code that
DeviceClass::reset is now legacy and they should look for
the new alternative (which is Resettable)
* it makes it easier to rename the reset field (which in turn
makes it easier to find places that call it)
The Coccinelle script can be used to automatically convert code that
was doing an open-coded assignment to DeviceClass::reset to call
device_class_set_legacy_reset() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-7-peter.maydell@linaro.org
There are no callers of device_class_set_parent_reset() left in the tree,
as they've all been converted to use three-phase reset and the
corresponding resettable_class_set_parent_phases() function.
Remove device_class_set_parent_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-5-peter.maydell@linaro.org
Convert the s390 CPU to the Resettable interface. This is slightly
more involved than the other CPU types were (see commits
9130cade5fc22..d66e64dd006df) because S390 has its own set of
different kinds of reset with different behaviours that it needs to
trigger.
We handle this by adding these reset types to the Resettable
ResetType enum. Now instead of having an underlying implementation
of reset that is s390-specific and which might be called either
directly or via the DeviceClass::reset method, we can implement only
the Resettable hold phase method, and have the places that need to
trigger an s390-specific reset type do so by calling
resettable_reset().
The other option would have been to smuggle in the s390 reset
type via, for instance, a field in the CPU state that we set
in s390_do_cpu_initial_reset() etc and then examined in the
reset method, but doing it this way seems cleaner.
The motivation for this change is that this is the last caller
of the legacy device_class_set_parent_reset() function, and
removing that will let us clean up some glue code that we added
for the transition to three-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240830145812.1967042-4-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
+OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
=Plwu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240912
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
# 38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
# ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
# +OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
# =Plwu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 Sep 2024 14:01:34 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu:
hw/loongarch: Add acpi SPCR table support
hw/loongarch: virt: pass random seed to fdt
hw/loongarch: virt: support up to 4 serial ports
target/loongarch: Support QMP dump-guest-memory
target/loongarch/kvm: Add vCPU reset function
hw/loongarch: Remove default enable with VIRTIO_VGA device
target/loongarch: Add compatible support about VM reboot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
=ySRy
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
# Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
# LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
# xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
# 24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
# lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
# =ySRy
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Sep 2024 14:50:29 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
hw/acpi/ich9: Add periodic and swsmi timer
virtio-mem: don't warn about THP sizes on a kernel without THP support
hw/audio/virtio-sound: fix heap buffer overflow
hw/cxl: fix physical address field in get scan media results output
virtio-pci: Add lookup subregion of VirtIOPCIRegion MR
vhost_net: configure all host notifiers in a single MR transaction
tests/acpi: pc: update golden masters for DSDT
hw/i386/acpi-build: Return a pre-computed _PRT table
tests/acpi: pc: allow DSDT acpi table changes
intel_iommu: Make PASID-cache and PIOTLB type invalid in legacy mode
intel_iommu: Fix invalidation descriptor type field
virtio: rename virtio_split_packed_update_used_idx
hw/pci/pci-hmp-cmds: Avoid displaying bogus size in 'info pci'
pci: don't skip function 0 occupancy verification for devfn auto assign
hw/isa/vt82c686.c: Embed i8259 irq in device state instead of allocating
hw: Move declaration of IRQState to header and add init function
virtio: Always reset vhost devices
virtio: Allow .get_vhost() without vhost_started
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to support additional channels of communication using
`-serial`, add several serial ports, up to the standard 4 generally
supported by the 8250 driver.
Fixed: https://lore.kernel.org/all/20240907143439.2792924-1-Jason@zx2c4.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Bibo Mao <maobibo@loongson.cn>
[gaosong: ACPI uart need't reverse order]
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240907143439.2792924-1-Jason@zx2c4.com>
This patch implements the periodic and the swsmi ICH9 chipset timers. They are
especially useful when prototyping UEFI firmware (e.g. with EDK2's OVMF)
using QEMU.
For backwards compatibility, the compat properties "x-smi-swsmi-timer",
and "x-smi-periodic-timer" are introduced.
Additionally, writes to the SMI_STS register are enabled for the
corresponding two bits using a write mask to make future work easier.
Signed-off-by: Dominic Prinz <git@dprinz.de>
Message-Id: <1d90ea69e01ab71a0f2ced116801dc78e04f4448.1725991505.git.git@dprinz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows the vhost_net device which has multiple virtqueues to batch
the setup of all its host notifiers. This significantly reduces the
vhost_net device starting and stoping time, e.g. the time spend
on enabling notifiers reduce from 630ms to 75ms and the time spend on
disabling notifiers reduce from 441ms to 45ms for a VM with 192 vCPUs
and 15 vhost-user-net devices (64vq per device) in our case.
Signed-off-by: zuoboqun <zuoboqun@baidu.com>
Message-Id: <20240816070835.8309-1-zuoboqun@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To allow embedding a qemu_irq in a struct move its definition to the
header and add a function to init it in place without allocating it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <e3ffd0f6ef8845d0f7247c9b6ff33f7ee8b432cf.1719690591.git.balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Historically, .get_vhost() was probably only called when
vdev->vhost_started is true. However, we now decidedly want to call it
also when vhost_started is false, specifically so we can issue a reset
to the vhost back-end while device operation is stopped.
Some .get_vhost() implementations dereference some pointers (or return
offsets from them) that are probably guaranteed to be non-NULL when
vhost_started is true, but not necessarily otherwise. This patch makes
all such implementations check all such pointers, returning NULL if any
is NULL.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20240723163941.48775-2-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptodevBackendAlgType has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTODEV_BACKEND_ALG.
We could simply drop 'prefix', but I think the abbreviation "alg" is
less than clear.
Additionally rename the type to QCryptodevBackendAlgoType. The prefix
becomes QCRYPTODEV_BACKEND_ALGO_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-19-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoIVGenAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_IVGEN_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_IV_GEN_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoIVGenAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoIVGenAlgo instead. The prefix becomes
QCRYPTO_IV_GEN_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-14-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoCipherAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_CIPHER_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_CIPHER_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoCipherAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoCipherAlgo instead. The prefix becomes
QCRYPTO_CIPHER_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-13-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoHashAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_HASH_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_HASH_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoHashAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoHashAlgo instead. The prefix becomes to
QCRYPTO_HASH_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-12-armbru@redhat.com>
[Conflicts with merge commit 7bbadc60b5 resolved]
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
CpuS390Entitlement has a 'prefix' to change the generated enumeration
constants' prefix from CPU_S390_ENTITLEMENT to S390_CPU_ENTITLEMENT.
Rename the type to S390CpuEntitlement, so that 'prefix' is not needed.
Likewise change CpuS390Polarization to S390CpuPolarization, and
CpuS390State to S390CpuState.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240904111836.3273842-10-armbru@redhat.com>
- Mattias's patch to support concurrent bounce buffers for PCI devices
- David's memory leak fix in dirty_memory_extend()
- Fabiano's CI fix to disable vmstate-static-checker test in compat tests
- Denis's patch that adds one more trace point for cpu throttle changes
- Yichen's multifd qatzip compressor support
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZt9VlhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wZ+4QD+NPzprFD7RF2DPHT5bdo6NTWFSZxW4dyD
oFp2vhYDEAYA/A5TTfOh3QpYBOaP2PxztZIZSLgs1bokhp+sLM3/PVsK
=6JYP
-----END PGP SIGNATURE-----
Merge tag 'migration-20240909-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request for 9.2
- Mattias's patch to support concurrent bounce buffers for PCI devices
- David's memory leak fix in dirty_memory_extend()
- Fabiano's CI fix to disable vmstate-static-checker test in compat tests
- Denis's patch that adds one more trace point for cpu throttle changes
- Yichen's multifd qatzip compressor support
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZt9VlhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wZ+4QD+NPzprFD7RF2DPHT5bdo6NTWFSZxW4dyD
# oFp2vhYDEAYA/A5TTfOh3QpYBOaP2PxztZIZSLgs1bokhp+sLM3/PVsK
# =6JYP
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 Sep 2024 21:07:50 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240909-pull-request' of https://gitlab.com/peterx/qemu:
system: improve migration debug
tests/migration: Add integration test for 'qatzip' compression method
migration: Introduce 'qatzip' compression method
migration: Add migration parameters for QATzip
meson: Introduce 'qatzip' feature to the build system
docs/migration: add qatzip compression feature
ci: migration: Don't run python tests in the compat job
softmmu/physmem: fix memory leak in dirty_memory_extend()
softmmu: Support concurrent bounce buffers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As reported by Peter, we might be leaking memory when removing the
highest RAMBlock (in the weird ram_addr_t space), and adding a new one.
We will fail to realize that we already allocated bitmaps for more
dirty memory blocks, and effectively discard the pointers to them.
Fix it by getting rid of last_ram_page() and by remembering the number
of dirty memory blocks that have been allocated already.
While at it, let's use "unsigned int" for the number of blocks, which
should be sufficient until we reach ~32 exabytes.
Looks like this leak was introduced as we switched from using a single
bitmap_zero_extend() to allocating multiple bitmaps:
bitmap_zero_extend() relies on g_renew() which should have taken care of
this.
Resolves: https://lkml.kernel.org/r/CAFEAcA-k7a+VObGAfCFNygQNfCKL=AfX6A4kScq=VSSK0peqPg@mail.gmail.com
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 5b82b703b6 ("memory: RCU ram_list.dirty_memory[] for safe RAM hotplug")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240828090743.128647-1-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
When DMA memory can't be directly accessed, as is the case when
running the device model in a separate process without shareable DMA
file descriptors, bounce buffering is used.
It is not uncommon for device models to request mapping of several DMA
regions at the same time. Examples include:
* net devices, e.g. when transmitting a packet that is split across
several TX descriptors (observed with igb)
* USB host controllers, when handling a packet with multiple data TRBs
(observed with xhci)
Previously, qemu only provided a single bounce buffer per AddressSpace
and would fail DMA map requests while the buffer was already in use. In
turn, this would cause DMA failures that ultimately manifest as hardware
errors from the guest perspective.
This change allocates DMA bounce buffers dynamically instead of
supporting only a single buffer. Thus, multiple DMA mappings work
correctly also when RAM can't be mmap()-ed.
The total bounce buffer allocation size is limited individually for each
AddressSpace. The default limit is 4096 bytes, matching the previous
maximum buffer size. A new x-max-bounce-buffer-size parameter is
provided to configure the limit for PCI devices.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240819135455.2957406-1-mnissler@rivosinc.com
Signed-off-by: Peter Xu <peterx@redhat.com>
An utility function for getting fingerprint from X.509 certificate
has been introduced. Implementation only provided using gnutls.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
[DB: fixed missing gnutls_x509_crt_deinit in success path]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Minor bugs and errors related to ufs-test are resolved. Some
permissions and code implementations that are not synchronized
with the ufs spec are edited.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
The TYPE_XLNX_VERSAL_EFUSE_CTRL device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f222b5b9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 420
43d49e1139e3f3071b1f22fac1e3e7249c9a6)
#1 0x7fbb10669c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f222f90c5d in register_init_block hw/core/register.c:248:34
#3 0x55f222f916be in register_init_block32 hw/core/register.c:299:12
#4 0x55f223bbdd15 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f225b23391 in object_init_with_type qom/object.c:420:9
#6 0x55f225b0a66b in object_initialize_with_type qom/object.c:562:5
#7 0x55f225b0bf0d in object_new_with_type qom/object.c:782:5
#8 0x55f225b0bfe1 in object_new qom/object.c:797:12
#9 0x55f226309e0d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-7-peter.maydell@linaro.org
The TYPE_XLNX_VERSAL_TRNG device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55842ec799d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 47496e53f3e779f1c7e9b82cbea07407152b498b)
#1 0x7fe793c75c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55842f0aec5d in register_init_block hw/core/register.c:248:34
#3 0x55842f0af6be in register_init_block32 hw/core/register.c:299:12
#4 0x55842f801588 in trng_init hw/misc/xlnx-versal-trng.c:614:9
#5 0x558431c411a1 in object_init_with_type qom/object.c:420:9
#6 0x558431c2847b in object_initialize_with_type qom/object.c:562:5
#7 0x558431c29d1d in object_new_with_type qom/object.c:782:5
#8 0x558431c29df1 in object_new qom/object.c:797:12
#9 0x558432427c1d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-6-peter.maydell@linaro.org
The TYPE_XLNX_ZYNQMP_EFUSE device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f3ff5839d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 23cf931c66865a71b6cc4da95156d03bc106fa72)
#1 0x7f3f31c6bc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f3ff9b8c5d in register_init_block hw/core/register.c:248:34
#3 0x55f3ff9b96be in register_init_block32 hw/core/register.c:299:12
#4 0x55f4005e5b25 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f40254afb1 in object_init_with_type qom/object.c:420:9
#6 0x55f40253228b in object_initialize_with_type qom/object.c:562:5
#7 0x55f402533b2d in object_new_with_type qom/object.c:782:5
#8 0x55f402533c01 in object_new qom/object.c:797:12
#9 0x55f402d31a2d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-5-peter.maydell@linaro.org
The TYPE_XLNX_BBRAM device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x5641518ca9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 4a6
18cb63d57d5a19ed45cfc262b08da47eaafe5)
#1 0x7ff1aab31c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x564151cffc5d in register_init_block hw/core/register.c:248:34
#3 0x564151d006be in register_init_block32 hw/core/register.c:299:12
#4 0x56415293df75 in bbram_ctrl_init hw/nvram/xlnx-bbram.c:462:9
#5 0x564154891dc1 in object_init_with_type qom/object.c:420:9
#6 0x56415487909b in object_initialize_with_type qom/object.c:562:5
#7 0x56415487a93d in object_new_with_type qom/object.c:782:5
#8 0x56415487aa11 in object_new qom/object.c:797:12
#9 0x56415507883d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-4-peter.maydell@linaro.org
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the virt board. This is no change in
behaviour for guests, because if they simply ignore stage 2 and never
configure it then it has no effect. For the usual backwards
compatibility reasons we enable this only for machine types starting
with 9.2.
(Note that the SMMU is disabled by default on the virt board and is
only created if the user passes the 'iommu=smmuv3' machine option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-4-peter.maydell@linaro.org
Add support for optionally creating a PCIe/GPEX controller.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Break out a common Xen PVH machine in preparation for
adding a x86 Xen PVH machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Fix the misspellings of "overriden" also in code comments.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240813125638.395461-1-sw@weilnetz.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-20-alex.bennee@linaro.org>
This reverts commit 1f881ea4a4.
That commit causes reverse_debugging.py test failures, and does
not seem to solve the root cause of the problem x86-64 still
hangs in record/replay tests.
The problem with short-cutting the iowait that was taken during
record phase is that related events will not get consumed at the
same points (e.g., reading the clock).
A hang with zero icount always seems to be a symptom of an earlier
problem that has caused the recording to become out of synch with
the execution and consumption of events by replay.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-6-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-14-alex.bennee@linaro.org>
When replaying a trace, it is possible to go from shutdown to running
with a reverse-debugging step. This can be useful if the problem being
debugged triggers a reset or shutdown.
This can be tested by making a recording of a machine that shuts down,
then using -action shutdown=pause when replaying it. Continuing to the
end of the trace then reverse-stepping in gdb crashes due to invalid
runstate transition.
Just permitting the transition seems to be all that's necessary for
reverse-debugging to work well in such a state.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-5-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-13-alex.bennee@linaro.org>
Having magic numbers inside the code is not a good idea, as it
is error-prone. So, instead, create a macro with the number
definition.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA-PYnZ-32MRX+PgvzhnoAV80zBKMYg61j2f=oHaGfwSsg@mail.gmail.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: ef0e7f5fca6cd94eda415ecee670c3028c671b74.1723121692.git.mchehab+huawei@kernel.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit bb71846325 we added some macro magic to avoid
variable-shadowing when using some of our more complicated
macros. One of the internal components of this is a macro
named MAKE_IDENTFIER. Fix the typo in its name: it should
be MAKE_IDENTIFIER.
Commit created with
sed -i -e 's/MAKE_IDENTFIER/MAKE_IDENTIFIER/g' include/qemu/*.h include/qapi/qmp/qobject.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240801102516.3843780-1-peter.maydell@linaro.org
Allowing an unlimited number of clients to any web service is a recipe
for a rudimentary denial of service attack: the client merely needs to
open lots of sockets without closing them, until qemu no longer has
any more fds available to allocate.
For qemu-nbd, we default to allowing only 1 connection unless more are
explicitly asked for (-e or --shared); this was historically picked as
a nice default (without an explicit -t, a non-persistent qemu-nbd goes
away after a client disconnects, without needing any additional
follow-up commands), and we are not going to change that interface now
(besides, someday we want to point people towards qemu-storage-daemon
instead of qemu-nbd).
But for qemu proper, and the newer qemu-storage-daemon, the QMP
nbd-server-start command has historically had a default of unlimited
number of connections, in part because unlike qemu-nbd it is
inherently persistent until nbd-server-stop. Allowing multiple client
sockets is particularly useful for clients that can take advantage of
MULTI_CONN (creating parallel sockets to increase throughput),
although known clients that do so (such as libnbd's nbdcopy) typically
use only 8 or 16 connections (the benefits of scaling diminish once
more sockets are competing for kernel attention). Picking a number
large enough for typical use cases, but not unlimited, makes it
slightly harder for a malicious client to perform a denial of service
merely by opening lots of connections withot progressing through the
handshake.
This change does not eliminate CVE-2024-7409 on its own, but reduces
the chance for fd exhaustion or unlimited memory usage as an attack
surface. On the other hand, by itself, it makes it more obvious that
with a finite limit, we have the problem of an unauthenticated client
holding 100 fds opened as a way to block out a legitimate client from
being able to connect; thus, later patches will further add timeouts
to reject clients that are not making progress.
This is an INTENTIONAL change in behavior, and will break any client
of nbd-server-start that was not passing an explicit max-connections
parameter, yet expects more than 100 simultaneous connections. We are
not aware of any such client (as stated above, most clients aware of
MULTI_CONN get by just fine on 8 or 16 connections, and probably cope
with later connections failing by relying on the earlier connections;
libvirt has not yet been passing max-connections, but generally
creates NBD servers with the intent for a single client for the sake
of live storage migration; meanwhile, the KubeSAN project anticipates
a large cluster sharing multiple clients [up to 8 per node, and up to
100 nodes in a cluster], but it currently uses qemu-nbd with an
explicit --shared=0 rather than qemu-storage-daemon with
nbd-server-start).
We considered using a deprecation period (declare that omitting
max-parameters is deprecated, and make it mandatory in 3 releases -
then we don't need to pick an arbitrary default); that has zero risk
of breaking any apps that accidentally depended on more than 100
connections, and where such breakage might not be noticed under unit
testing but only under the larger loads of production usage. But it
does not close the denial-of-service hole until far into the future,
and requires all apps to change to add the parameter even if 100 was
good enough. It also has a drawback that any app (like libvirt) that
is accidentally relying on an unlimited default should seriously
consider their own CVE now, at which point they are going to change to
pass explicit max-connections sooner than waiting for 3 qemu releases.
Finally, if our changed default breaks an app, that app can always
pass in an explicit max-parameters with a larger value.
It is also intentional that the HMP interface to nbd-server-start is
not changed to expose max-connections (any client needing to fine-tune
things should be using QMP).
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240807174943.771624-12-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ericb: Expand commit message to summarize Dan's argument for why we
break corner-case back-compat behavior without a deprecation period]
Signed-off-by: Eric Blake <eblake@redhat.com>
Upcoming patches to fix a CVE need to track an opaque pointer passed
in by the owner of a client object, as well as request for a time
limit on how fast negotiation must complete. Prepare for that by
changing the signature of nbd_client_new() and adding an accessor to
get at the opaque pointer, although for now the two servers
(qemu-nbd.c and blockdev-nbd.c) do not change behavior even though
they pass in a new default timeout value.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240807174943.771624-11-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: s/LIMIT/MAX_SECS/ as suggested by Dan]
Signed-off-by: Eric Blake <eblake@redhat.com>
Upstream clang 18 (and backports to clang 17 in Fedora and RHEL)
implemented support for __attribute__((cleanup())) in its Thread Safety
Analysis, so we can now actually have a proper implementation of
WITH_GRAPH_RDLOCK_GUARD() that understands when we acquire and when we
release the lock.
-Wthread-safety is now only enabled if the compiler is new enough to
understand this pattern. In theory, we could have used some #ifdefs to
keep the existing basic checks on old compilers, but as long as someone
runs a newer compiler (and our CI does), we will catch locking problems,
so it's probably not worth keeping multiple implementations for this.
The implementation can't use g_autoptr any more because the glib macros
define wrapper functions that don't have the right TSA attributes, so
the compiler would complain about them. Just use the cleanup attribute
directly instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240627181245.281403-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Loongarch IPI inherits from class LoongsonIPICommonClass, and it
only contains Loongarch 3A5000 virt machine specific interfaces,
rather than mix different machine implementations together.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-14-philmd@linaro.org>
Loongarch IPI is added here, it inherits from class
TYPE_LOONGSON_IPI_COMMON, and two interfaces get_iocsr_as() and
cpu_by_arch_id() are added for Loongarch 3A5000 machine. It can
be used when ipi is emulated in userspace with KVM mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased and simplified]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-13-philmd@linaro.org>
Move the common code from loongson_ipi.c to loongson_ipi_common.c,
call parent_realize() instead of loongson_ipi_common_realize() in
loongson_ipi_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-12-philmd@linaro.org>
In order to access loongson_ipi_core_read/write helpers
from loongson_ipi_common.c in the next commit, make their
prototype declaration public.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-11-philmd@linaro.org>
Allow Loongson IPI implementations to have their own
cpu_by_arch_id() handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-10-philmd@linaro.org>
Allow Loongson IPI implementations to have their own get_iocsr_as()
handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-9-philmd@linaro.org>
Move the IPICore structure and corresponding common fields
of LoongsonIPICommonState to "hw/intc/loongson_ipi_common.h".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-7-philmd@linaro.org>
It is easier to manage one array of MMIO MR rather
than one per vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-6-philmd@linaro.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-5-philmd@linaro.org>
Introduce LOONGSON_IPI_COMMON stubs, QDev parent of LOONGSON_IPI.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-4-philmd@linaro.org>
We'll have to add LoongsonIPIClass in few commits,
so rename LoongsonIPI as LoongsonIPIState for clarity.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-2-philmd@linaro.org>
In order for this function to be usable by tap.c code, add a list of
file descriptors that should not be closed.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Message-ID: <20240802145423.3232974-5-cleger@rivosinc.com>
[rth: Use max_fd in qemu_close_all_open_fd_close_range]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move close_all_open_fds() in oslib-posix, rename it
qemu_close_all_open_fds() and export it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802145423.3232974-2-cleger@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Patch 06b1297017 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.
The patch enables notification and checks whether the guest has
added some buffers since last check of available buffers when
the available buffers are insufficient. If no buffer is added,
return false, else recheck the available buffers in the loop.
If the available buffers are sufficient, disable notification
and return true.
Changes:
1. Change the return type of virtqueue_get_avail_bytes() from void
to int, it returns an opaque that represents the shadow_avail_idx
of the virtqueue on success, else -1 on error.
2. Add a new API: virtio_queue_enable_notification_and_check(),
it takes an opaque as input arg which is returned from
virtqueue_get_avail_bytes(). It enables notification firstly,
then checks whether the guest has added some buffers since
last check of available buffers or not by virtio_queue_poll(),
return ture if yes.
The patch also reverts patch "06b12970174".
The case below can reproduce the stall.
Guest 0
+--------+
| iperf |
---------------> | server |
Host | +--------+
+--------+ | ...
| iperf |----
| client |---- Guest n
+--------+ | +--------+
| | iperf |
---------------> | server |
+--------+
Boot many guests from qemu with virtio network:
qemu ... -netdev tap,id=net_x \
-device virtio-net-pci-non-transitional,\
iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x
Each guest acts as iperf server with commands below:
iperf3 -s -D -i 10 -p 8001
iperf3 -s -D -i 10 -p 8002
The host as iperf client:
iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000
After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from the host.
It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
| need kick the host?
| NAPI continues
v
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
v
... ...
On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.
Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.
The host may stall forever at the sequences below:
Host Guest
------------ -----------
fetch buf, send packet receive packet ---
... ... |
fetch buf, send packet add buf |
... add buf virtnet_poll
buf not enough avail idx-> add buf |
read avail idx add buf |
add buf ---
receive packet ---
write event idx ... |
wait for kick add buf virtnet_poll
... |
---
no more packet, exit NAPI
In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buffers.
step 1: The buf is not enough, for example, a big packet
needs 5 buf, but the available buf count is 3.
The host read current avail idx.
step 2: The guest adds some buf, then checks whether the
host is waiting for kick signal, not at this time.
The used ring is not empty, the guest continues
the second loop of NAPI.
step 3: The host writes the avail idx read from avail
ring to used ring as event idx via
virtio_queue_set_notification(q->rx_vq, 1).
step 4: At the end of the second loop of NAPI, recheck
whether kick is needed, as the event idx in the
used ring written by the host is beyound the
range of kick condition, the guest will not
send kick signal to the host.
Fixes: 06b1297017 ("virtio-net: fix network stall under load")
Cc: qemu-stable@nongnu.org
Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Our official support policy only supports the most recent two
versions of macOS (currently macOS 13 Ventura and macOS 14 Sonoma),
and we already have code that assumes at least macOS 12 Monterey or
better. In commit 2d27c91e2b we dropped some of the back-compat
code for older macOS versions, but missed the guard in osdep.h that
is providing a fallback for macOS 10 and earlier.
Simplify the ifdef to the "ifdef __APPLE__" that we use elsewhere for
"is this macOS?".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240730095939.2781172-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Additional END state 'info pic' information as added. The 'ignore',
'crowd' and 'precluded escalation control' bits of an Event Notification
Descriptor are all used when delivering an interrupt targeting a VP-group
or crowd.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving xive2_nvp_pic_print_info() to align with the other "pic_print_info"
functions.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for writing a completion notification byte in memory
whenever a cache flush or queue sync inject operation is requested by
software. QEMU does not cache any of the XIVE data that is in memory and
therefore it simply writes the completion notification byte at the time
that the operation is requested.
Co-authored-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In this commit SPI shift engine and sequencer logic is implemented.
Shift engine performs serialization and de-serialization according to the
control by the sequencer and according to the setup defined in the
configuration registers. Sequencer implements the main control logic and
FSM to handle data transmit and data receive control of the shift engine.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SPI controller device model supports a connection to a single SPI responder.
This provide access to SPI seeproms, TPM, flash device and an ADC controller.
All SPI function control is mapped into the SPI register space to enable full
control by firmware. In this commit SPI configuration component is modelled
which contains all SPI configuration and status registers as well as the hold
registers for data to be sent or having been received.
An existing QEMU SSI framework is used and SSI_BUS is created.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
[np: Fix FDT macro compile for qtest]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In this commit target specific dependency from include/hw/ppc/pnv_xscom.h
has been removed so that pnv_xscom.h can be included outside hw/ppc.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Recent POWER CPUs can operate in "LPAR per core" or "LPAR per thread"
modes. In per-core mode, some SPRs and IPI doorbells are shared between
threads in a core. In per-thread mode, supervisor and user state is
not shared between threads.
OpenPOWER systems after POWER8 use LPAR per thread mode, and it is
required for KVM. Enterprise systems use LPAR per core mode, as they
partition the machine by core.
Implement a lpar-per-core machine option for powernv machines. This
is fixed true for POWER8 machines, and defaults off for P9 and P10.
With this change, powernv8 SMT now works sufficiently to run Linux,
with a single socket. Multi-threaded KVM guests still have problems,
as does multi-socket Linux boot.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The PC unit in the processor core contains xscom registers that provide
low level status and control of the CPU.
This implements "direct controls", sufficient for skiboot firmware,
which uses it to send NMI IPIs between CPUs.
POWER10 is sufficiently different from POWER9 (particularly with respect
to QME and special wakeup) that it is not trivial to implement POWER9
support by reusing the code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power CPUs have an execution control facility that can pause, resume,
and cause NMIs, among other things. Add a function that will nmi a CPU
and resume it if it was paused, in preparation for implementing the
control facility.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER10 has a quirk in its ChipTOD addressing that requires the even
small-core to be selected even when programming the odd small-core.
This allows skiboot chiptod init to run in big-core mode.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER9 and POWER10 machines come in two variants, big-core and
small-core. Big-core machines are SMT8 from software's point of view,
but the low level platform topology ("xscom registers and pervasive
addressing"), these look more like a pair of small cores ganged
together.
Presently the way this is modelled is to create one SMT8 PnvCore and add
special cases to xscom and pervasive for big-core mode that tries to
split this into two small cores, but this is becoming too complicated to
manage.
A better approach is to create 2 core structures and ganging them
together to look like an SMT8 core in TCG. Then the xscom and pervasive
models mostly do not need to differentiate big and small core modes.
This change adds initial mode bits and QEMU topology handling to
split SMT8 cores into 2xSMT4 cores.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The chip_pir chip class method allows the platform to set the PIR
processor identification register. Extend this to a more general
ID function which also allows the TIR to be set. This is in
preparation for "big core", which is a more complicated topology
of cores and threads.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use a class attribute to specify the number of SMT threads per core
permitted for different machines, 8 for powernv8 and 4 for powernv9/10.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SPRC/SPRD were recently added to all BookS CPUs supported, but
they are only tested on POWER9 and POWER10, so restrict them to
those CPUs.
SPR indirect scratch registers presently replicated per-CPU like
SMT SPRs, but the PnvCore is a better place for them since they
are restricted to P9/P10.
Also add SPR indirect read access to core thread state for POWER9
since skiboot accesses that when booting to check for big-core
mode.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The timebase state machine is per per-core state and can be driven
by any thread in the core. It is currently implemented as a hack
where the state is in a CPU structure and only thread 0's state is
accessed by the chiptod, which limits programming the timebase
side of the state machine to thread 0 of a core.
Move the state out into PnvCore and share it among all threads.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This helps move core state from CPU to core structures.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
One of the functions of the ADU is indirect memory access engines that
send and receive data via ADU registers.
This implements the ADU LPC memory access functionality sufficiently
for IBM proprietary firmware to access the UART and print characters
to the serial port as it does on real hardware.
This requires a linkage between adu and lpc, which allows adu to
perform memory access in the lpc space.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This implements a framework for an ADU unit model.
The ADU unit actually implements XSCOM, which is the bridge between MMIO
and PIB. However it also includes control and status registers and other
functions that are exposed as PIB (xscom) registers.
To keep things simple, pnv_xscom.c remains the XSCOM bridge
implementation, and pnv_adu.c implements the ADU registers and other
functions.
So far, just the ADU no-op registers in the pnv_xscom.c default handler
are moved over to the adu model.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The POWER8 LPC ISA device irqs all get combined and reported to the line
connected the PSI LPCHC irq. POWER9 changed this so only internal LPC
host controller irqs use that line, and the device irqs get routed to
4 new lines connected to PSI SERIRQ0-3.
POWER9 also introduced a new feature that automatically clears the irq
status in the LPC host controller when EOI'ed, so software does not have
to.
The powernv OPAL (skiboot) firmware managed to work because the LPCHC
irq handler scanned all LPC irqs and handled those including clearing
status even on POWER9 systems. So LPC irqs worked despite OPAL thinking
it was running in POWER9 mode. After this change, UART interrupts show
up on serirq1 which is where OPAL routes them to:
cat /proc/interrupts
...
20: 0 XIVE-IRQ 1048563 Level opal-psi#0:lpchc
...
25: 34 XIVE-IRQ 1048568 Level opal-psi#0:lpc_serirq_mux1
Whereas they previously turn up on lpchc.
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The LPC HC irq status register bits are set when an LPC IRQSER input is
asserted. These irq status bits drive the PSI irq to the CPU interrupt
controller. The LPC HC irq status bits are cleared by software writing
to the register with 1's for the bits to clear.
Existing register write was clearing the irq status bits even when the
input was asserted, this results in interrupts being lost.
This fix changes the behavior to keep track of the device IRQ status
in internal state that is separate from the irq status register, and
only allowing the irq status bits to be cleared if the associated
input is not asserted.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
[np: rebased before P9 PSI SERIRQ patch, adjust changelog/comments]
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This helper provides an easy way to identify the next available free cpu
index which can be used for vcpu creation. Until now, this is being
called at a very later stage and there is a need to be able to call it
earlier (for now, with ppc64) hence the need to export.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There are distinct helpers for creating and parking a KVM vCPU.
However, there can be cases where a platform needs to create and
immediately park the vCPU during early stages of vcpu init which
can later be reused when vcpu thread gets initialized. This would
help detect failures with kvm_create_vcpu at an early stage.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This cap did not add the migration code when it was introduced. This
results in migration failure when changing the default using the
command line.
Cc: qemu-stable@nongnu.org
Fixes: ccc5a4c5e1 ("spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
GNUTLS doesn't know how to perform I/O on anything other than plain
FDs, so the TLS session provides it with some I/O callbacks. The
GNUTLS API design requires these callbacks to return a unix errno
value, which means we're currently loosing the useful QEMU "Error"
object.
This changes the I/O callbacks in QEMU to stash the "Error" object
in the QCryptoTLSSession class, and fetch it when seeing an I/O
error returned from GNUTLS, thus preserving useful error messages.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current TLS session I/O APIs just return a synthetic errno
value on error, which has been translated from a gnutls error
value. This looses a large amount of valuable information that
distinguishes different scenarios.
Pushing population of the "Error *errp" object into the TLS
session I/O APIs gives more detailed error information.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- Restrict probe_access*() functions to TCG (Phil)
- Extract do_invalidate_device_tlb from vtd_process_device_iotlb_desc (Clément)
- Fixes in Loongson IPI model (Bibo & Phil)
- Make docs/interop/firmware.json compatible with qapi-gen.py script (Thomas)
- Correct MPC I2C MMIO region size (Zoltan)
- Remove useless cast in Loongson3 Virt machine (Yao)
- Various uses of range overlap API (Yao)
- Use ERRP_GUARD macro in nubus_virtio_mmio_realize (Zhao)
- Use DMA memory API in Goldfish UART model (Phil)
- Expose fifo8_pop_buf and introduce fifo8_drop (Phil)
- MAINTAINERS updates (Zhao, Phil)
-----BEGIN PGP SIGNATURE-----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=J/I2
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240723' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Restrict probe_access*() functions to TCG (Phil)
- Extract do_invalidate_device_tlb from vtd_process_device_iotlb_desc (Clément)
- Fixes in Loongson IPI model (Bibo & Phil)
- Make docs/interop/firmware.json compatible with qapi-gen.py script (Thomas)
- Correct MPC I2C MMIO region size (Zoltan)
- Remove useless cast in Loongson3 Virt machine (Yao)
- Various uses of range overlap API (Yao)
- Use ERRP_GUARD macro in nubus_virtio_mmio_realize (Zhao)
- Use DMA memory API in Goldfish UART model (Phil)
- Expose fifo8_pop_buf and introduce fifo8_drop (Phil)
- MAINTAINERS updates (Zhao, Phil)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmagFF8ACgkQ4+MsLN6t
# wN5bKg//f5TwUhsy2ff0FJpHheDOj/9Gc2nZ1U/Fp0E5N3sz3A7MGp91wye6Xwi3
# XG34YN9LK1AVzuCdrEEs5Uaxs1ZS1R2mV+fZaGHwYYxPDdnXxGyp/2Q0eyRxzbcN
# zxE2hWscYSZbPVEru4HvZJKfp4XnE1cqA78fJKMAdtq0IPq38tmQNRlJ+gWD9dC6
# ZUHXPFf3DnucvVuwqb0JYO/E+uJpcTtgR6pc09Xtv/HFgMiS0vKZ1I/6LChqAUw9
# eLMpD/5V2naemVadJe98/dL7gIUnhB8GTjsb4ioblG59AO/uojutwjBSQvFxBUUw
# U5lX9OSn20ouwcGiqimsz+5ziwhCG0R6r1zeQJFqUxrpZSscq7NQp9ygbvirm+wS
# edLc8yTPf4MtYOihzPP9jLPcXPZjEV64gSnJISDDFYWANCrysX3suaFEOuVYPl+s
# ZgQYRVSSYOYHgNqBSRkPKKVUxskSQiqLY3SfGJG4EA9Ktt5lD1cLCXQxhdsqphFm
# Ws3zkrVVL0EKl4v/4MtCgITIIctN1ZJE9u3oPJjASqSvK6EebFqAJkc2SidzKHz0
# F3iYX2AheWNHCQ3HFu023EvFryjlxYk95fs2f6Uj2a9yVbi813qsvd3gcZ8t0kTT
# +dmQwpu1MxjzZnA6838R6OCMnC+UpMPqQh3dPkU/5AF2fc3NnN8=
# =J/I2
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Jul 2024 06:36:47 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240723' of https://github.com/philmd/qemu: (28 commits)
MAINTAINERS: Add myself as a reviewer of machine core
MAINTAINERS: Cover guest-agent in QAPI schema
util/fifo8: Introduce fifo8_drop()
util/fifo8: Expose fifo8_pop_buf()
util/fifo8: Rename fifo8_pop_buf() -> fifo8_pop_bufptr()
util/fifo8: Rename fifo8_peek_buf() -> fifo8_peek_bufptr()
util/fifo8: Use fifo8_reset() in fifo8_create()
util/fifo8: Fix style
chardev/char-fe: Document returned value on error
hw/char/goldfish: Use DMA memory API
hw/nubus/virtio-mmio: Fix missing ERRP_GUARD() in realize handler
dump: make range overlap check more readable
crypto/block-luks: make range overlap check more readable
system/memory_mapping: make range overlap check more readable
sparc/ldst_helper: make range overlap check more readable
cxl/mailbox: make range overlap check more readable
util/range: Make ranges_overlap() return bool
hw/mips/loongson3_virt: remove useless type cast
hw/i2c/mpc_i2c: Fix mmio region size
docs/interop/firmware.json: convert "Example" section
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* IOMMUFD Dirty Tracking support
* Fix for a possible SEGV in IOMMU type1 container
* Dropped initialization of host IOMMU device with mdev devices
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmafyVUACgkQUaNDx8/7
7KGebRAAzEYxvstDxSPNF+1xx937TKbRpiKYtspTfEgu4Ht50MwO2ZqnVWzTBSwa
qcjhDf2avMBpBvkp4O9fR7nXR0HRN2KvYrBSThZ3Qpqu4KjxCAGcHI5uYmgfizYh
BBLrw3eWME5Ry220TinQF5KFl50vGq7Z/mku5N5Tgj2qfTfCXYK1Kc19SyAga49n
LSokTIjZAGJa4vxrE7THawaEUjFRjfCJey64JUs/TPJaGr4R1snJcWgETww6juUE
9OSw/xl0AoQhaN/ZTRC1qCsBLUI2MVPsC+x+vqVK62HlTjCx+uDRVQ8KzfDzjCeH
gaLkMjxJSuJZMpm4UU7DBzDGEGcEBCGeNyFt37BSqqPPpX55CcFhj++d8vqTiwpF
YzmTNd/znxcZTw6OJN9sQZohh+NeS86CVZ3x31HD3dXifhRf17jbh7NoIyi+0ZCb
N+mytOH5BXsD+ddwbk+yMaxXV43Fgz7ThG5tB1tjhhNtLZHDA5ezFvGZ5F/FJrqE
xAbjOhz5MC+RcOVNSzQJCULNqFpfE6Gqeys6btEDm/ltf4LpAe6W1HYuv8BJc19T
UsqGK2yKAuQX8GErYxJ1zqZCttVrgpsmXFYTC5iGbxC84mvsF0Iti96IdXz9gfzN
Vlb2OxoefcOwVqIhbkvTZW0ZwYGGDDPAYhLMfr5lSuRqj123OOo=
=cViP
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20240723-1' of https://github.com/legoater/qemu into staging
vfio queue:
* IOMMUFD Dirty Tracking support
* Fix for a possible SEGV in IOMMU type1 container
* Dropped initialization of host IOMMU device with mdev devices
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmafyVUACgkQUaNDx8/7
# 7KGebRAAzEYxvstDxSPNF+1xx937TKbRpiKYtspTfEgu4Ht50MwO2ZqnVWzTBSwa
# qcjhDf2avMBpBvkp4O9fR7nXR0HRN2KvYrBSThZ3Qpqu4KjxCAGcHI5uYmgfizYh
# BBLrw3eWME5Ry220TinQF5KFl50vGq7Z/mku5N5Tgj2qfTfCXYK1Kc19SyAga49n
# LSokTIjZAGJa4vxrE7THawaEUjFRjfCJey64JUs/TPJaGr4R1snJcWgETww6juUE
# 9OSw/xl0AoQhaN/ZTRC1qCsBLUI2MVPsC+x+vqVK62HlTjCx+uDRVQ8KzfDzjCeH
# gaLkMjxJSuJZMpm4UU7DBzDGEGcEBCGeNyFt37BSqqPPpX55CcFhj++d8vqTiwpF
# YzmTNd/znxcZTw6OJN9sQZohh+NeS86CVZ3x31HD3dXifhRf17jbh7NoIyi+0ZCb
# N+mytOH5BXsD+ddwbk+yMaxXV43Fgz7ThG5tB1tjhhNtLZHDA5ezFvGZ5F/FJrqE
# xAbjOhz5MC+RcOVNSzQJCULNqFpfE6Gqeys6btEDm/ltf4LpAe6W1HYuv8BJc19T
# UsqGK2yKAuQX8GErYxJ1zqZCttVrgpsmXFYTC5iGbxC84mvsF0Iti96IdXz9gfzN
# Vlb2OxoefcOwVqIhbkvTZW0ZwYGGDDPAYhLMfr5lSuRqj123OOo=
# =cViP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Jul 2024 01:16:37 AM AEST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240723-1' of https://github.com/legoater/qemu:
vfio/common: Allow disabling device dirty page tracking
vfio/migration: Don't block migration device dirty tracking is unsupported
vfio/iommufd: Implement VFIOIOMMUClass::query_dirty_bitmap support
vfio/iommufd: Implement VFIOIOMMUClass::set_dirty_tracking support
vfio/iommufd: Probe and request hwpt dirty tracking capability
vfio/{iommufd, container}: Invoke HostIOMMUDevice::realize() during attach_device()
vfio/iommufd: Add hw_caps field to HostIOMMUDeviceCaps
vfio/{iommufd,container}: Remove caps::aw_bits
vfio/iommufd: Introduce auto domain creation
vfio/ccw: Don't initialize HOST_IOMMU_DEVICE with mdev
vfio/ap: Don't initialize HOST_IOMMU_DEVICE with mdev
vfio/iommufd: Return errno in iommufd_cdev_attach_ioas_hwpt()
backends/iommufd: Extend iommufd_backend_get_device_info() to fetch HW capabilities
vfio/iommufd: Don't initialize nor set a HOST_IOMMU_DEVICE with mdev
vfio/pci: Extract mdev check into an helper
hw/vfio/container: Fix SIGSEV on vfio_container_instance_finalize()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hpet: emulation improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaelL4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMXoQf+K77lNlHLETSgeeP3dr7yZPOmXjjN
qFY/18jiyLw7MK1rZC09fF+n9SoaTH8JDKupt0z9M1R10HKHLIO04f8zDE+dOxaE
Rou3yKnlTgFPGSoPPFr1n1JJfxtYlLZRoUzaAcHUaa4W7JR/OHJX90n1Rb9MXeDk
jV6P0v1FWtIDdM6ERm9qBGoQdYhj6Ra2T4/NZKJFXwIhKEkxgu4yO7WXv8l0dxQz
jE4fKotqAvrkYW1EsiVZm30lw/19duhvGiYeQXoYhk8KKXXjAbJMblLITSNWsCio
3l6Uud/lOxekkJDAq5nH3H9hCBm0WwvwL+0vRf3Mkr+/xRGvrhtmUdp8NQ==
=00mB
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/kvm: support for reading RAPL MSRs using a helper program
* hpet: emulation improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaelL4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMXoQf+K77lNlHLETSgeeP3dr7yZPOmXjjN
# qFY/18jiyLw7MK1rZC09fF+n9SoaTH8JDKupt0z9M1R10HKHLIO04f8zDE+dOxaE
# Rou3yKnlTgFPGSoPPFr1n1JJfxtYlLZRoUzaAcHUaa4W7JR/OHJX90n1Rb9MXeDk
# jV6P0v1FWtIDdM6ERm9qBGoQdYhj6Ra2T4/NZKJFXwIhKEkxgu4yO7WXv8l0dxQz
# jE4fKotqAvrkYW1EsiVZm30lw/19duhvGiYeQXoYhk8KKXXjAbJMblLITSNWsCio
# 3l6Uud/lOxekkJDAq5nH3H9hCBm0WwvwL+0vRf3Mkr+/xRGvrhtmUdp8NQ==
# =00mB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 03:19:58 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
hpet: avoid timer storms on periodic timers
hpet: store full 64-bit target value of the counter
hpet: accept 64-bit reads and writes
hpet: place read-only bits directly in "new_val"
hpet: remove unnecessary variable "index"
hpet: ignore high bits of comparator in 32-bit mode
hpet: fix and cleanup persistence of interrupt status
Add support for RAPL MSRs in KVM/Qemu
tools: build qemu-vmsr-helper
qio: add support for SO_PEERCRED for socket channel
target/i386: do not crash if microvm guest uses SGX CPUID leaves
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
=k8e9
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features,fixes
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
# zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
# yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
# wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
# VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
# M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
# =k8e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 10:16:31 AM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (61 commits)
hw/nvme: Add SPDM over DOE support
backends: Initial support for SPDM socket support
hw/pci: Add all Data Object Types defined in PCIe r6.0
tests/acpi: Add expected ACPI AML files for RISC-V
tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V
tests/acpi: Add empty ACPI data files for RISC-V
tests/qtest/bios-tables-test.c: Remove the fall back path
tests/acpi: update expected DSDT blob for aarch64 and microvm
acpi/gpex: Create PCI link devices outside PCI root bridge
tests/acpi: Allow DSDT acpi table changes for aarch64
hw/riscv/virt-acpi-build.c: Update the HID of RISC-V UART
hw/riscv/virt-acpi-build.c: Add namespace devices for PLIC and APLIC
virtio-iommu: Add trace point on virtio_iommu_detach_endpoint_from_domain
hw/vfio/common: Add vfio_listener_region_del_iommu trace event
virtio-iommu: Remove the end point on detach
virtio-iommu: Free [host_]resv_ranges on unset_iommu_devices
virtio-iommu: Remove probe_done
Revert "virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged"
gdbstub: Add helper function to unregister GDB register space
physmem: Add helper function to destroy CPU AddressSpace
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the fifo8_drop() helper for clarity.
It is a simple wrapper over fifo8_pop_buf().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-8-philmd@linaro.org>
Extract fifo8_pop_buf() from hw/scsi/esp.c and expose
it as part of the <qemu/fifo8.h> API. This function takes
care of non-contiguous (wrapped) FIFO buffer (which is an
implementation detail).
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-7-philmd@linaro.org>
Since fifo8_pop_buf() return a const buffer (which points
directly into the FIFO backing store). Rename it using the
'bufptr' suffix to better reflect that it is a pointer to
the internal buffer that is being returned. This will help
differentiate with methods *copying* the FIFO data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-6-philmd@linaro.org>
Since fifo8_peek_buf() return a const buffer (which points
directly into the FIFO backing store). Rename it using the
'bufptr' suffix to better reflect that it is a pointer to
the internal buffer that is being returned. This will help
differentiate with methods *copying* the FIFO data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240722160745.67904-5-philmd@linaro.org>
qemu_chr_fe_add_watch() and qemu_chr_fe_write[_all]()
return -1 on error. Mention it in the documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240722160745.67904-2-philmd@linaro.org>
Just like range_overlaps_range(), use the returned bool value
to check whether 2 given ranges overlap.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240722040742.11513-2-yaoxt.fnst@fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This API is specific to TCG (already handled by hardware
accelerators), so restrict it with #ifdef'ry. Remove
unnecessary stubs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240529155918.6221-1-philmd@linaro.org>
The property 'x-pre-copy-dirty-page-tracking' allows disabling the whole
tracking of VF pre-copy phase of dirty page tracking, though it means
that it will only be used at the start of the switchover phase.
Add an option that disables the VF dirty page tracking, and fall
back into container-based dirty page tracking. This also allows to
use IOMMU dirty tracking even on VFs with their own dirty
tracker scheme.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
ioctl(iommufd, IOMMU_HWPT_GET_DIRTY_BITMAP, arg) is the UAPI
that fetches the bitmap that tells what was dirty in an IOVA
range.
A single bitmap is allocated and used across all the hwpts
sharing an IOAS which is then used in log_sync() to set Qemu
global bitmaps.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
ioctl(iommufd, IOMMU_HWPT_SET_DIRTY_TRACKING, arg) is the UAPI that
enables or disables dirty page tracking. The ioctl is used if the hwpt
has been created with dirty tracking supported domain (stored in
hwpt::flags) and it is called on the whole list of iommu domains.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to using the dirty tracking UAPI, probe whether the IOMMU
supports dirty tracking. This is done via the data stored in
hiod::caps::hw_caps initialized from GET_HW_INFO.
Qemu doesn't know if VF dirty tracking is supported when allocating
hardware pagetable in iommufd_cdev_autodomains_get(). This is because
VFIODevice migration state hasn't been initialized *yet* hence it can't pick
between VF dirty tracking vs IOMMU dirty tracking. So, if IOMMU supports
dirty tracking it always creates HWPTs with IOMMU_HWPT_ALLOC_DIRTY_TRACKING
even if later on VFIOMigration decides to use VF dirty tracking instead.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[ clg: - Fixed vbasedev->iommu_dirty_tracking assignment in
iommufd_cdev_autodomains_get()
- Added warning for heterogeneous dirty page tracking support
in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Move the HostIOMMUDevice::realize() to be invoked during the attach of the device
before we allocate IOMMUFD hardware pagetable objects (HWPT). This allows the use
of the hw_caps obtained by IOMMU_GET_HW_INFO that essentially tell if the IOMMU
behind the device supports dirty tracking.
Note: The HostIOMMUDevice data from legacy backend is static and doesn't
need any information from the (type1-iommu) backend to be initialized.
In contrast however, the IOMMUFD HostIOMMUDevice data requires the
iommufd FD to be connected and having a devid to be able to successfully
GET_HW_INFO. This means vfio_device_hiod_realize() is called in
different places within the backend .attach_device() implementation.
Suggested-by: Cédric Le Goater <clg@redhat.cm>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Fixed error handling in iommufd_cdev_attach() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Store the value of @caps returned by iommufd_backend_get_device_info()
in a new field HostIOMMUDeviceCaps::hw_caps. Right now the only value is
whether device IOMMU supports dirty tracking (IOMMU_HW_CAP_DIRTY_TRACKING).
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Remove caps::aw_bits which requires the bcontainer::iova_ranges being
initialized after device is actually attached. Instead defer that to
.get_cap() and call vfio_device_get_aw_bits() directly.
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
There's generally two modes of operation for IOMMUFD:
1) The simple user API which intends to perform relatively simple things
with IOMMUs e.g. DPDK. The process generally creates an IOAS and attaches
to VFIO and mainly performs IOAS_MAP and UNMAP.
2) The native IOMMUFD API where you have fine grained control of the
IOMMU domain and model it accordingly. This is where most new feature
are being steered to.
For dirty tracking 2) is required, as it needs to ensure that
the stage-2/parent IOMMU domain will only attach devices
that support dirty tracking (so far it is all homogeneous in x86, likely
not the case for smmuv3). Such invariant on dirty tracking provides a
useful guarantee to VMMs that will refuse incompatible device
attachments for IOMMU domains.
Dirty tracking insurance is enforced via HWPT_ALLOC, which is
responsible for creating an IOMMU domain. This is contrast to the
'simple API' where the IOMMU domain is created by IOMMUFD automatically
when it attaches to VFIO (usually referred as autodomains) but it has
the needed handling for mdevs.
To support dirty tracking with the advanced IOMMUFD API, it needs
similar logic, where IOMMU domains are created and devices attached to
compatible domains. Essentially mimicking kernel
iommufd_device_auto_get_domain(). With mdevs given there's no IOMMU domain
it falls back to IOAS attach.
The auto domain logic allows different IOMMU domains to be created when
DMA dirty tracking is not desired (and VF can provide it), and others where
it is. Here it is not used in this way given how VFIODevice migration
state is initialized after the device attachment. But such mixed mode of
IOMMU dirty tracking + device dirty tracking is an improvement that can
be added on. Keep the 'all of nothing' of type1 approach that we have
been using so far between container vs device dirty tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
[ clg: Added ERRP_GUARD() in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
The helper will be able to fetch vendor agnostic IOMMU capabilities
supported both by hardware and software. Right now it is only iommu dirty
tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to skip initialization of the HostIOMMUDevice for mdev,
extract the checks that validate if a device is an mdev into helpers.
A vfio_device_is_mdev() is created, and subsystems consult VFIODevice::mdev
to check if it's mdev or not.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
jaqSwg==
=XgUE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu into staging
accel/tcg: Export set/clear_helper_retaddr
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
# cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
# 6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
# m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
# vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
# joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
# jaqSwg==
# =XgUE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 01:33:54 PM AEST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu:
target/riscv: Simplify probing in vext_ldff
target/s390x: Use set/clear_helper_retaddr in mem_helper.c
target/s390x: Use user_or_likely in access_memmove
target/s390x: Use user_or_likely in do_access_memset
target/ppc: Improve helper_dcbz for user-only
target/ppc: Merge helper_{dcbz,dcbzep}
target/ppc: Split out helper_dbczl for 970
target/ppc: Hoist dcbz_size out of dcbz_common
target/ppc/mem_helper.c: Remove a conditional from dcbz_common()
target/arm: Use set/clear_helper_retaddr in SVE and SME helpers
target/arm: Use set/clear_helper_retaddr in helper-a64.c
accel/tcg: Move {set,clear}_helper_retaddr to cpu_ldst.h
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use of these in helpers goes hand-in-hand with tlb_vaddr_to_host
and other probing functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Setup Data Object Exchange (DOE) as an extended capability for the NVME
controller and connect SPDM to it (CMA) to it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20240703092027.644758-4-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SPDM enables authentication, attestation and key exchange to assist in
providing infrastructure security enablement. It's a standard published
by the DMTF [1].
SPDM supports multiple transports, including PCIe DOE and MCTP.
This patch adds support to QEMU to connect to an external SPDM
instance.
SPDM support can be added to any QEMU device by exposing a
TCP socket to a SPDM server. The server can then implement the SPDM
decoding/encoding support, generally using libspdm [2].
This is similar to how the current TPM implementation works and means
that the heavy lifting of setting up certificate chains, capabilities,
measurements and complex crypto can be done outside QEMU by a well
supported and tested library.
1: https://www.dmtf.org/standards/SPDM
2: https://github.com/DMTF/libspdm
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Co-developed-by: Jonathan Cameron <Jonathan.cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Changes by WM
- Bug fixes from testing
]
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
[ Changes by AF:
- Convert to be more QEMU-ified
- Move to backends as it isn't PCIe specific
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240703092027.644758-3-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add all of the defined protocols/features from the PCIe-SIG r6.0
"Table 6-32 PCI-SIG defined Data Object Types (Vendor ID = 0001h)"
table.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20240703092027.644758-2-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have switched to PCIIOMMUOps to convey host IOMMU information,
the host reserved regions are transmitted when the PCIe topology is
built. This happens way before the virtio-iommu driver calls the probe
request. So let's remove the probe_done flag that allowed to check
the probe was not done before the IOMMU MR got enabled. Besides this
probe_done flag had a flaw wrt migration since it was not saved/restored.
The only case at risk is if 2 devices were plugged to a
PCIe to PCI bridge and thus aliased. First of all we
discovered in the past this case was not properly supported for
neither SMMU nor virtio-iommu on guest kernel side: see
[RFC] virtio-iommu: Take into account possible aliasing in virtio_iommu_mr()
https://lore.kernel.org/all/20230116124709.793084-1-eric.auger@redhat.com/
If this were supported by the guest kernel, it is unclear what the call
sequence would be from a virtio-iommu driver point of view.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-3-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add common function to help unregister the GDB register space. This shall be
done in context to the CPU unrealization.
Note: These are common functions exported to arch specific code. For example,
for ARM this code is being referred in associated arch specific patch-set:
Link: https://lore.kernel.org/qemu-devel/20230926103654.34424-1-salil.mehta@huawei.com/
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-8-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtual CPU Hot-unplug leads to unrealization of a CPU object. This also
involves destruction of the CPU AddressSpace. Add common function to help
destroy the CPU AddressSpace.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-7-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPUs Control device(\\_SB.PCI0) register interface for the x86 arch is IO port
based and existing CPUs AML code assumes _CRS objects would evaluate to a system
resource which describes IO Port address. But on ARM arch CPUs control
device(\\_SB.PRES) register interface is memory-mapped hence _CRS object should
evaluate to system resource which describes memory-mapped base address. Update
build CPUs AML function to accept both IO/MEMORY region spaces and accordingly
update the _CRS object.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-6-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
OSPM evaluates _EVT method to map the event. The CPU hotplug event eventually
results in start of the CPU scan. Scan figures out the CPU and the kind of
event(plug/unplug) and notifies it back to the guest. Update the GED AML _EVT
method with the call to method \\_SB.CPUS.CSCN (via \\_SB.GED.CSCN)
Architecture specific code [1] might initialize its CPUs AML code by calling
common function build_cpus_aml() like below for ARM:
build_cpus_aml(scope, ms, opts, xx_madt_cpu_entry, memmap[VIRT_CPUHP_ACPI].base,
"\\_SB", "\\_SB.GED.CSCN", AML_SYSTEM_MEMORY);
[1] https://lore.kernel.org/qemu-devel/20240613233639.202896-13-salil.mehta@huawei.com/
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-5-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI GED (as described in the ACPI 6.4 spec) uses an interrupt listed in the
_CRS object of GED to intimate OSPM about an event. Later then demultiplexes the
notified event by evaluating ACPI _EVT method to know the type of event. Use
ACPI GED to also notify the guest kernel about any CPU hot(un)plug events.
Note, GED interface is used by many hotplug events like memory hotplug, NVDIMM
hotplug and non-hotplug events like system power down event. Each of these can
be selected using a bit in the 32 bit GED IO interface. A bit has been reserved
for the CPU hotplug event.
ACPI CPU hotplug related initialization should only happen if ACPI_CPU_HOTPLUG
support has been enabled for particular architecture. Add cpu_hotplug_hw_init()
stub to avoid compilation break.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240716111502.202344-4-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
CPU ctrl-dev MMIO region length could be used in ACPI GED and various other
architecture specific places. Move ACPI_CPU_HOTPLUG_REG_LEN macro to more
appropriate common header file.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-3-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
KVM vCPU creation is done once during the vCPU realization when Qemu vCPU thread
is spawned. This is common to all the architectures as of now.
Hot-unplug of vCPU results in destruction of the vCPU object in QOM but the
corresponding KVM vCPU object in the Host KVM is not destroyed as KVM doesn't
support vCPU removal. Therefore, its representative KVM vCPU object/context in
Qemu is parked.
Refactor architecture common logic so that some APIs could be reused by vCPU
Hotplug code of some architectures likes ARM, Loongson etc. Update new/old APIs
with trace events. New APIs qemu_{create,park,unpark}_vcpu() can be externally
called. No functional change is intended here.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-2-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently QEMU describes initial[1] RAM* in SMBIOS as a series of
virtual DIMMs (capped at 16Gb max) using type 17 structure entries.
Which is fine for the most cases. However when starting guest
with terabytes of RAM this leads to too many memory device
structures, which eventually upsets linux kernel as it reserves
only 64K for these entries and when that border is crossed out
it runs out of reserved memory.
Instead of partitioning initial RAM on 16Gb DIMMs, use maximum
possible chunk size that SMBIOS spec allows[2]. Which lets
encode RAM in lower 31 bits of 32bit field (which amounts upto
2047Tb per DIMM).
As result initial RAM will generate only one type 17 structure
until host/guest reach ability to use more RAM in the future.
Compat changes:
We can't unconditionally change chunk size as it will break
QEMU<->guest ABI (and migration). Thus introduce a new machine
class field that would let older versioned machines to use
legacy 16Gb chunks, while new(er) machine type[s] use maximum
possible chunk size.
PS:
While it might seem to be risky to rise max entry size this large
(much beyond of what current physical RAM modules support),
I'd not expect it causing much issues, modulo uncovering bugs
in software running within guest. And those should be fixed
on guest side to handle SMBIOS spec properly, especially if
guest is expected to support so huge RAM configs.
In worst case, QEMU can reduce chunk size later if we would
care enough about introducing a workaround for some 'unfixable'
guest OS, either by fixing up the next machine type or
giving users a CLI option to customize it.
1) Initial RAM - is RAM configured with help '-m SIZE' CLI option/
implicitly defined by machine. It doesn't include memory
configured with help of '-device' option[s] (pcdimm,nvdimm,...)
2) SMBIOS 3.1.0 7.18.5 Memory Device — Extended Size
PS:
* tested on 8Tb host with RHEL6 guest, which seems to parse
type 17 SMBIOS table entries correctly (according to 'dmidecode').
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240715122417.4059293-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow user to attach SR-IOV VF to a virtio-pci PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-6-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A user can create a SR-IOV device by specifying the PF with the
sriov-pf property of the VFs. The VFs must be added before the PF.
A user-creatable VF must have PCIDeviceClass::sriov_vf_user_creatable
set. Such a VF cannot refer to the PF because it is created before the
PF.
A PF that user-creatable VFs can be attached calls
pcie_sriov_pf_init_from_user_created_vfs() during realization and
pcie_sriov_pf_exit() when exiting.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-5-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Starting with the "Sandy Bridge" generation, Intel CPUs provide a RAPL
interface (Running Average Power Limit) for advertising the accumulated
energy consumption of various power domains (e.g. CPU packages, DRAM,
etc.).
The consumption is reported via MSRs (model specific registers) like
MSR_PKG_ENERGY_STATUS for the CPU package power domain. These MSRs are
64 bits registers that represent the accumulated energy consumption in
micro Joules. They are updated by microcode every ~1ms.
For now, KVM always returns 0 when the guest requests the value of
these MSRs. Use the KVM MSR filtering mechanism to allow QEMU handle
these MSRs dynamically in userspace.
To limit the amount of system calls for every MSR call, create a new
thread in QEMU that updates the "virtual" MSR values asynchronously.
Each vCPU has its own vMSR to reflect the independence of vCPUs. The
thread updates the vMSR values with the ratio of energy consumed of
the whole physical CPU package the vCPU thread runs on and the
thread's utime and stime values.
All other non-vCPU threads are also taken into account. Their energy
consumption is evenly distributed among all vCPUs threads running on
the same physical CPU package.
To overcome the problem that reading the RAPL MSR requires priviliged
access, a socket communication between QEMU and the qemu-vmsr-helper is
mandatory. You can specified the socket path in the parameter.
This feature is activated with -accel kvm,rapl=true,path=/path/sock.sock
Actual limitation:
- Works only on Intel host CPU because AMD CPUs are using different MSR
adresses.
- Only the Package Power-Plane (MSR_PKG_ENERGY_STATUS) is reported at
the moment.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-4-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend copy command to copy user data across different namespaces via
support for specifying a namespace for each source range
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The function qio_channel_get_peercred() returns a pointer to the
credentials of the peer process connected to this socket.
This credentials structure is defined in <sys/socket.h> as follows:
struct ucred {
pid_t pid; /* Process ID of the sending process */
uid_t uid; /* User ID of the sending process */
gid_t gid; /* Group ID of the sending process */
};
The use of this function is possible only for connected AF_UNIX stream
sockets and for AF_UNIX stream and datagram socket pairs.
On platform other than Linux, the function return 0.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-2-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"semihosting/syscalls.h" requires definitions from
"gdbstub/syscalls.h", include it in order to avoid:
include/semihosting/syscalls.h:23:38: error: unknown type name 'gdb_syscall_complete_cb'
void semihost_sys_open(CPUState *cs, gdb_syscall_complete_cb complete,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-2-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-9-alex.bennee@linaro.org>
Coverity reported a memory leak (CID 1549757) in this code and its
admittedly rather clumsy handling of extending the command table.
Instead of handing over a full array of the commands lets use the
lighter weight GPtrArray and simply test for the presence of each
entry as we go. This avoids complications of transferring ownership of
arrays and keeps the final command entries as static entries in the
target code.
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Gustavo Bueno Romero <gustavo.romero@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-4-alex.bennee@linaro.org>
Extend the virtio device property definitions to include the
VIRTIO_F_IN_ORDER feature.
The default state of this feature is disabled, allowing it to be
explicitly enabled where it's supported.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-7-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the boolean 'in_order_filled' member to the VirtQueueElement structure.
The use of this boolean will signify whether the element has been processed
and is ready to be flushed (so long as the element is in-order). This
boolean is used to support the VIRTIO_F_IN_ORDER feature.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement transfer and activate functionality per 3.1 spec for
supporting update metadata (no actual buffers). Transfer times
are arbitrarily set to ten and two seconds for full and part
transfers, respectively.
cxl update-firmware mem0 -F fw.img
<on-going fw update>
cxl update-firmware mem0
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"fw_update_in_progress":true,
"remaining_size":22400
}
}
<completed fw update>
cxl update-firmware mem0
{
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"staged_slot":2,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"slot_2_version":"BWFW VERSION 1",
"fw_update_in_progress":false
}
}
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240627164912.25630-1-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705125915.991672-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.
The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-3-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
Get Supported Features retrieves the list of supported device specific
features. The settings of a feature can be retrieved using Get Feature and
optionally modified using Set Feature.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-2-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Preparation for allowing devices to define their own CCI commands
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20230906001517.324380-2-gregory.price@memverge.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Iterate over the list keeping the output payload size into account,
returning the results from a previous scan media operation. The
scan media operation does not fail prematurely due to device being
out of storage, so this implementation does not deal with the
retry/restart functionality.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-5-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h), the
sanitize command should delete all event logs. Introduce
cxl_discard_all_event_logs() and call
this in __do_sanitization().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20231222090051.3265307-5-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spec states that reads/writes should have no effect and a part of
commands should be ignored when the media is disabled, not when the
sanitize command is running.
Introduce cxl_dev_media_disabled() to check if the media is disabled and
replace sanitize_running() with it.
Make sure that the media has been correctly disabled during sanitation
by adding an assert to __toggle_media(). Now, enabling when already
enabled or vice versa results in an assert() failure.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/r/20231222090051.3265307-4-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use simple heuristics to determine the cost of scanning any given
chunk, assuming cost is equal across the whole device, without
differentiating between volatile or persistent partitions. This
is aligned to the fact that these constraints are not enforced
in respective poison query commands.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-3-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
And firmware required to set the offset of pool buffer
by writing "Function Control Register(I2CD 00)"
To make this model more readable, will change to introduce
a new bus pool buffer attribute in AspeedI2Cbus.
So, it does not need to calculate the pool buffer offset
for different I2C bus.
This patch rename the I2C class pool attribute to share_pool.
It make user more understand share pool and bus pool
are different.
Incrementing the version of aspeed_i2c_vmstate to 3.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
an I2C controller owns 8KB of register space for AST2700,
owns 4KB of register space for AST2600, AST2500 and AST2400,
and owns 64KB of register space for AST1030.
It set the memory region size 4KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the I2C controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 and AST2600 ADC controllers are identical.
Introduce ast2700 class and set 2 engines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping
bit is set at the board level. AST2700 also has support but it is not
yet ready in QEMU and others SoCs do not have support, so return false
always for these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images
specially built for this purpose.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
