Avoid multiple calls to io_prepare for unaligned acceses.
One call to do_ld_mmio_beN will never cross pages.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Push computation down into the if statements to the point
the data is used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than saving MemoryRegionSection and offset,
save phys_addr and MemoryRegion. This matches up
much closer with the plugin api.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the introduction of CPUTLBEntryFull, we can recover
the full cpu address space physical address without having
to examine the MemoryRegionSection.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are common code from io_readx and io_writex.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we defer address space update and tlb_flush until
the next async_run_on_cpu, the plugin run at the end of the
instruction no longer has to contend with a flushed tlb.
Therefore, delete SavedIOTLB entirely.
Properly return false from tlb_plugin_lookup when we do
not have a tlb match.
Fixes a bug in which SavedIOTLB had stale data, because
there were multiple i/o accesses within a single insn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230831030904.1194667-2-richard.henderson@linaro.org>
When memory region is ram, the lower TARGET_PAGE_BITS is not the
physical section number. Instead, its value is always 0.
Add comment and assert to make it clear.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230901060118.379-1-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
mttcg asserts that an execution ending with EXCP_HALTED must have
cpu->halted. However between the event or instruction that sets
cpu->halted and requests exit and the assertion here, an
asynchronous event could clear cpu->halted.
This leads to crashes running AIX on ppc/pseries because it uses
H_CEDE/H_PROD hcalls, where H_CEDE sets self->halted = 1 and
H_PROD sets other cpu->halted = 0 and kicks it.
H_PROD could be turned into an interrupt to wake, but several other
places in ppc, sparc, and semihosting follow what looks like a similar
pattern setting halted = 0 directly. So remove this assertion.
Reported-by: Ivan Warren <ivan@vmfacility.fr>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230829010658.8252-1-npiggin@gmail.com>
[rth: Keep the case label and adjust the comment.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have Eager Page Split support added for ARM in the kernel,
enable it in Qemu. This adds,
-eager-split-size to -accel sub-options to set the eager page split chunk size.
-enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20230905091246.1931-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While the option still needs to be parsed in the configure script
(it's needed by tests/tcg, and also to decide about recursing
into contrib/plugins), passing it to Meson can be done with -D
instead of using config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HAX is deprecated since commits 73741fda6c ("MAINTAINERS: Abort
HAXM maintenance") and 90c167a1da ("docs/about/deprecated: Mark
HAXM in QEMU as deprecated"), released in v8.0.0.
Per the latest HAXM release (v7.8 [*]), the latest QEMU supported
is v7.2:
Note: Up to this release, HAXM supports QEMU from 2.9.0 to 7.2.0.
The next commit (https://github.com/intel/haxm/commit/da1b8ec072)
added:
HAXM v7.8.0 is our last release and we will not accept
pull requests or respond to issues after this.
It became very hard to build and test HAXM. Its previous
maintainers made it clear they won't help. It doesn't seem to be
a very good use of QEMU maintainers to spend their time in a dead
project. Save our time by removing this orphan zombie code.
[*] https://github.com/intel/haxm/releases/tag/v7.8.0
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230831082016.60885-1-philmd@linaro.org>
After system startup, run the update to memory_dispatch
and the tlb_flush on the cpu. This eliminates a race,
wherein a running cpu sees the memory_dispatch change
but has not yet seen the tlb_flush.
Since the update now happens on the cpu, we need not use
qatomic_rcu_read to protect the read of memory_dispatch.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1826
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1834
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1846
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As we are now using vaddr for representing guest addresses, update the
static assert to check that vaddr fits in the run_on_cpu_data union.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes the address type of the guest memory read/write functions from
target_ulong to abi_ptr. (abi_ptr is currently typedef'd to target_ulong
but that will change in a following commit.) This will reduce the
coupling between accel/ and target/.
Note: Function pointers that point to cpu_[st|ld]*() in target/riscv and
target/rx are also updated in this commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Widens the pc and saved_insn fields of hvf_sw_breakpoint from
target_ulong to vaddr. Other hvf_* functions accessing hvf_sw_breakpoint
are also widened to match.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-3-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Widens the pc and saved_insn fields of kvm_sw_breakpoint from
target_ulong to vaddr. The pc argument of kvm_find_sw_breakpoint is also
widened to match.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The returned value was always zero and had no meaning.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-7-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
An error may occur after s->as is allocated, for example if the
KVM_CREATE_VM ioctl call fails.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-6-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On MIPS, kvm_arch_get_default_type() returns a negative value when an
error occurred so handle the case. Also, let other machines return
negative values when errors occur and declare returning a negative
value as the correct way to propagate an error that happened when
determining KVM type.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-5-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.
For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.
If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apply save_iotlb_data() to io_readx() as well as to io_writex().
This fixes SEGFAULT on qemu_plugin_hwaddr_phys_addr() call plugins
for addresses inside of MMIO region.
Signed-off-by: Dmitriy Solovev <d.solovev@yadro.com>
Signed-off-by: Mikhail Tyutin <m.tyutin@yadro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230804110903.19968-1-m.tyutin@yadro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the single-page case we were issuing misaligned i/o to
the memory subsystem, which does not handle it properly.
Split such accesses via do_{ld,st}_mmio_*.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1800
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the address and size are aligned, send larger chunks
to the memory subsystem. This will be required to make
more use of these helpers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace MMULookupPageData* with CPUTLBEntryFull, addr, size.
Move QEMU_IOTHREAD_LOCK_GUARD to the caller.
This simplifies the usage from do_ld16_beN and do_st16_leN, where
we weren't locking the entire operation, and required hoop jumping
for passing addr and size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On overflow of code_gen_buffer, we unlock the guest pages we had been
translating, but failed to clear gen_tb. On restart, if we cannot
allocate a TB, we exit to the main loop to perform the flush of all
TBs as soon as possible. With garbage in gen_tb, we hit an assert:
../src/accel/tcg/tb-maint.c:348:page_unlock__debug: \
assertion failed: (page_is_locked(pd))
Fixes: deba78709a ("accel/tcg: Always lock pages before translation")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Runs into core dump on arm64 and the backtrace extracted from the
core dump is shown as below. It's caused by accessing uninitialized
@kvm_state in kvm_flush_coalesced_mmio_buffer() due to commit 176d073029
("hw/arm/virt: Use machine_memory_devices_init()"), where the machine's
memory region is added earlier than before.
main
qemu_init
configure_accelerators
qemu_opts_foreach
do_configure_accelerator
accel_init_machine
kvm_init
virt_kvm_type
virt_set_memmap
machine_memory_devices_init
memory_region_add_subregion
memory_region_add_subregion_common
memory_region_update_container_subregions
memory_region_transaction_begin
qemu_flush_coalesced_mmio_buffer
kvm_flush_coalesced_mmio_buffer
Fix it by bailing early in kvm_flush_coalesced_mmio_buffer() on the
uninitialized @kvm_state. With this applied, no crash is observed on
arm64.
Fixes: 176d073029 ("hw/arm/virt: Use machine_memory_devices_init()")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230731125946.2038742-1-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These should match 'start' as target_ulong, not target_long.
On 32bit targets, the parameter was sign-extended to uint64_t,
so only the first mmap within the upper 2GB memory can succeed.
Signed-off-by: Luca Bonissi <qemu@bonslack.org>
Message-Id: <327460e2-0ebd-9edb-426b-1df80d16c32a@bonslack.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In replacing target_ulong with vaddr and TARGET_FMT_lx with VADDR_PRIx,
the zero-padding of TARGET_FMT_lx got lost. Readd 16-wide zero-padding
for logging consistency.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230713120746.26897-1-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only, the probe for page writability may race with another
thread's mprotect. Take the mmap_lock around the operation. This
is still faster than the start/end_exclusive fallback.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the initial commit, cdfac37be0, the sense of the test is incorrect,
as the -1/0 return was confusing. In bef6f008b9, we mechanically
invert all callers while changing to false/true return, preserving the
incorrectness of the test.
Now that the return sense is sane, it's easy to see that if !write,
then the page is not modifiable (i.e. most likely read-only, with
PROT_NONE handled via SIGSEGV).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit f0a08b0913 we changed the type of the PC from
target_ulong to vaddr. In doing so we inadvertently dropped the
zero-padding on the PC in trace lines (the second item inside the []
in these lines). They used to look like this on AArch64, for
instance:
Trace 0: 0x7f2260000100 [00000000/0000000040000000/00000061/ff200000]
and now they look like this:
Trace 0: 0x7f4f50000100 [00000000/40000000/00000061/ff200000]
and if the PC happens to be somewhere low like 0x5000
then the field is shown as /5000/.
This is because TARGET_FMT_lx is a "%08x" or "%016x" specifier,
depending on TARGET_LONG_SIZE, whereas VADDR_PRIx is just PRIx64
with no width specifier.
Restore the zero-padding by adding an 016 width specifier to
this tracing and a couple of others that were similarly recently
changed to use VADDR_PRIx without a width specifier.
We can't unfortunately restore the "32-bit guests are padded to
8 hex digits and 64-bit guests to 16 hex digits" behaviour so
easily.
Fixes: f0a08b0913 ("accel/tcg/cpu-exec.c: Widen pc to vaddr")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-id: 20230711165434.4123674-1-peter.maydell@linaro.org
We adjust CONFIG_ATOMIC128 and CONFIG_CMPXCHG128 with
CONFIG_ATOMIC128_OPT in atomic128.h. It is difficult
to tell when those changes have been applied with the
ifdef we must use with CONFIG_CMPXCHG128. So instead
use HAVE_CMPXCHG128, which triggers -Werror-undef when
the proper header has not been included.
Improves tcg_gen_atomic_cmpxchg_i128 for s390x host, which
requires CONFIG_ATOMIC128_OPT. Without this we fall back
to EXCP_ATOMIC to single-step 128-bit atomics, which is
slow enough to cause some tests to time out.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had done this for user-mode by invoking page_protect
within the translator loop. Extend this to handle system
mode as well. Move page locking out of tb_link_page.
Reported-by: Liren Wei <lrwei@bupt.edu.cn>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
Only PAGE_WRITE needs special attention, all others can be
handled as we do for PAGE_READ. Adjust the mask.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230707204054.8792-24-richard.henderson@linaro.org>
Use the interval tree to locate an unused range in the VM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-17-richard.henderson@linaro.org>
Examine the interval tree to validate that a region
has no existing mappings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-10-richard.henderson@linaro.org>
Share the setjmp cleanup between cpu_exec_step_atomic
and cpu_exec_setjmp.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
Ensure that that both the start and last addresses are within
the same guest page.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230629082522.606219-3-mark.cave-ayland@ilande.co.uk>
[rth: Use tcg_debug_assert, simplify the expression]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Due to a copy-paste error in tb_invalidate_phys_range, the wrong
start address was passed to tb_invalidate_phys_page_range__locked.
Correct is to use the start of each page in turn.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: e506ad6a05 ("accel/tcg: Pass last not end to tb_invalidate_phys_range")
Message-Id: <20230629082522.606219-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add MEMORY_LISTNER_PRIORITY_MIN for the symbolic value for the min value of
the memory listener instead of the hard-coded magic value 0. Add explicit
initialization.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <29f88477fe82eb774bcfcae7f65ea21995f865f2.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MEMORY_LISTENER_PRIORITY_DEV_BACKEND for the symbolic value
for memory listener to replace the hard-coded value 10 for the
device backend.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <8314d91688030d7004e96958f12e2c83fb889245.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MEMORY_LISTNER_PRIORITY_ACCEL for the symbolic value for the memory
listener to replace the hard-coded value 10 for accel.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <feebe423becc6e2aa375f59f6abce9a85bc15abb.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Avoid when calling kvm_direct_msi_enabled() from
arm_gicv3_its_common.c the next commit:
Undefined symbols for architecture arm64:
"_kvm_direct_msi_allowed", referenced from:
_its_class_name in hw_intc_arm_gicv3_its_common.c.o
ld: symbol(s) not found for architecture arm64
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405160454.97436-3-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState.
Rename the 'hvf_vcpu_state' structure as 'AccelCPUState'.
Use the generic 'accel' field of CPUState instead of 'hvf'.
Replace g_malloc0() by g_new0() for readability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-17-philmd@linaro.org>
On Windows hosts, cpu->hThread is assigned but never accessed:
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-4-philmd@linaro.org>
This frees up one bit of the primary tlb flags without
impacting the TLB_NOTDIRTY logic.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have run out of bits we can use within the CPUTLBEntry comparators,
as TLB_FLAGS_MASK cannot overlap alignment.
Store slow_flags[] in CPUTLBEntryFull, and merge with the flags from
the comparator. A new TLB_FORCE_SLOW bit is set within the comparator
as an indication that the slow path must be used.
Move TLB_BSWAP to TLB_SLOW_FLAGS_MASK. Since we are out of bits,
we cannot create a new bit without moving an old one.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now issue host memory barriers to match the guest memory order.
Continue to disable MTTCG only if the guest has not been ported.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bring the helpers into line with the rest of tcg in respecting
guest memory ordering.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TBStats will be introduced to replace CONFIG_PROFILER totally, here
remove all CONFIG_PROFILER related stuffs first.
Signed-off-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230607122411.3394702-2-fei2.wu@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use vaddr for guest virtual address in translator_use_goto_tb() and
translator_loop().
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-11-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update atomic_mmu_lookup() and cpu_mmu_lookup() to take the guest
virtual address as a vaddr instead of a target_ulong.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Functions for probing memory accesses (and functions that call these)
are updated to take a vaddr for guest virtual addresses over
target_ulong.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Related functions dealing with the jump cache are also updated.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-8-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-7-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Functions accessing MMULookupPageData are also updated.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-3-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replaces target_ulong with vaddr for guest virtual addresses in tlb_*()
functions and auxilliary structs.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A regression has been detected in latency testing of KVM guests.
More specifically, it was observed that the cyclictest
numbers inside of an isolated vcpu (running on isolated pcpu) are:
Where a maximum of 50us is acceptable.
The implementation of KVM_GET_STATS_FD uses run_on_cpu to query
per vcpu statistics, which interrupts the vcpu (and is unnecessary).
To fix this, open the per vcpu stats fd on vcpu initialization,
and read from that fd from QEMU's main thread.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only need lookup_tb_ptr() prototype.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230611085846.21415-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Invert some if() ladders for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Otherwise we hit the default assert not reached.
Handle it as MO_ATOM_NONE, because of size and misalignment.
We already handle this correctly in do_ld16_beN.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
-----BEGIN PGP SIGNATURE-----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=fOTc
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 8.1
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
# gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
# LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
# F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
# jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
# WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
# Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
# N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
# Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
# zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
# Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
# uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
# =fOTc
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits)
hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only.
target/riscv: Smepmp: Return error when access permission not allowed in PMP
target/riscv/vector_helper.c: Remove the check for extra tail elements
target/riscv/vector_helper.c: clean up reference of MTYPE
target/riscv: Fix initialized value for cur_pmmask
util/log: Add vector registers to log
docs/system: riscv: Add pflash usage details
riscv/virt: Support using pflash via -blockdev option
hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none"
target/riscv: Remove pc_succ_insn from DisasContext
target/riscv: Enable PC-relative translation
target/riscv: Use true diff for gen_pc_plus_diff
target/riscv: Change gen_set_pc_imm to gen_update_pc
target/riscv: Change gen_goto_tb to work on displacements
target/riscv: Introduce cur_insn_len into DisasContext
target/riscv: Fix target address to update badaddr
disas/riscv.c: Remove redundant parentheses
disas/riscv.c: Fix lines with over 80 characters
disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions
disas/riscv.c: Support disas for Z*inx extensions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On MacOS 11 and subsequent versions, in case the resulting binary is not
signed with the proper entitlement, handle and report the HV_DENIED
error.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Message-Id: <20230608123014.28715-1-quic_acaggian@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The computation is documented as unused in this case,
but triggers an ubsan error:
../accel/tcg/ldst_atomicity.c.inc:837:33: runtime error: shift exponent -32 is negative
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../accel/tcg/ldst_atomicity.c.inc:837:33 in
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230606171629.98157-1-richard.henderson@linaro.org>
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains that perf_marker is never unmapped.
Fix by unmapping it in perf_exit().
Fixes: Coverity CID 1507929
Fixes: 5584e2dbe8 ("tcg: add perfmap and jitdump")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605114134.1169974-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is only used in translator.c, and uses a
target-specific typedef: abi_ptr.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This finally paves the way for tcg/ to be built once per mode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce the header to only bswap.h and cpu_ldst.h.
Move exec/translate-all.h to translator.c.
Reduce tcg.h and tcg-op.h to tcg-op-common.h.
Remove otherwise unused headers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is used by exactly one host in extraordinary circumstances.
This means that translator.h need not include plugin-gen.h;
translator.c already includes plugin-gen.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only usage of gen_tb_start and gen_tb_end are here.
Move the static icount_start_insn variable into a local
within translator_loop. Simplify the two subroutines
by passing in the existing local cflags variable.
Leave only the declaration of gen_io_start in gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes TranslationBlock agnostic to the address size of the guest.
Use vaddr for pc, since that's always a virtual address.
Use uint64_t for cs_base, since usage varies between guests.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From this remove, it's no longer clear what this is attempting
to protect. The last time a use of this define was added to
the source tree, as opposed to merely moved around, was 2008.
There have been many cleanups since that time and this is
no longer required for the build to succeed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This replaces of TCG_GUEST_DEFAULT_MO in tcg-op-ldst.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_INSN_START_WORDS in tcg.c.
Split out "tcg/insn-start-words.h" and use it in target/.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-proto-common.h without the target specific portion.
Use that in tcg-op-common.h. Include helper-proto.h in target/arm
and target/hexagon before helper-info.c.inc; all other targets are
already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move a use of TARGET_LONG_BITS out of tcg/tcg.h.
Include the new file only where required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in from exec/cpu_ldst.h, via exec/exec-all.h,
but the include of tcg.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Removes the only use of TARGET_LONG_BITS from tcg.h, which is to be
target independent. Move the symbol to a define in tcg-op.h, which
will continue to be target dependent. Rather than complicate matters
for the use in tb_gen_code(), expand the definition there.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now we no longer have dynamic state affecting things we can remove the
additional fields in cpu.h and simplify the TB hash calculation.
For the benchmark:
hyperfine -w 2 -m 20 \
"./arm-softmmu/qemu-system-arm -cpu cortex-a15 \
-machine type=virt,highmem=off \
-display none -m 2048 \
-serial mon:stdio \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-pci,netdev=unet \
-device virtio-scsi-pci \
-blockdev driver=raw,node-name=hd,discard=unmap,file.driver=host_device,file.filename=/dev/zen-disk/debian-bullseye-armhf \
-device scsi-hd,drive=hd -smp 4 \
-kernel /home/alex/lsrc/linux.git/builds/arm/arch/arm/boot/zImage \
-append 'console=ttyAMA0 root=/dev/sda2 systemd.unit=benchmark.service' \
-snapshot"
It has a marginal effect on runtime, before:
Time (mean ± σ): 26.279 s ± 2.438 s [User: 41.113 s, System: 1.843 s]
Range (min … max): 24.420 s … 32.565 s 20 runs
after:
Time (mean ± σ): 24.440 s ± 2.885 s [User: 34.474 s, System: 2.028 s]
Range (min … max): 21.663 s … 29.937 s 20 runs
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1358
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-10-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-9-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
PAGE_WRITE is current writability, as modified by TB protection;
PAGE_WRITE_ORG is the original page writability.
Fixes: cdfac37be0 ("accel/tcg: Honor atomicity of loads")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the locally defined load_atomic16 and store_atomic16,
along with HAVE_al16 and HAVE_al16_fast in favor of the
routines defined in atomic128.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These symbols will shortly become dynamic runtime tests and
therefore not appropriate for the preprocessor. Use the
matching CONFIG_* symbols for that purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that load/store are gone, we're always passing
PAGE_READ | PAGE_WRITE for RMW atomic operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Atomic load/store of 128-byte quantities is now handled
by cpu_{ld,st}16_mmu.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not only the routines in ldst_atomicity.c.inc need markup,
but also the ones in the headers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In fcdab382c8 we removed a tcg_gen_extu_tl_i64 from gen_empty_mem_cb,
and failed to adjust the associated copy, leading to a failed assert.
Fixes: fcdab382c8 ("accel/tcg: Widen plugin_gen_empty_mem_callback to i64")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230518145813.2940745-1-richard.henderson@linaro.org>
arm64 has different capability from x86 to enable the dirty ring, which
is KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Besides, arm64 also needs the backup
bitmap extension (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) when 'kvm-arm-gicv3'
or 'arm-its-kvm' device is enabled. Here the extension is always enabled
and the unnecessary overhead to do the last stage of dirty log synchronization
when those two devices aren't used is introduced, but the overhead should
be very small and acceptable. The benefit is cover future cases where those
two devices are used without modifying the code.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230509022122.20888-5-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to multiple capabilities associated with the dirty ring for different
architectures: KVM_CAP_DIRTY_{LOG_RING, LOG_RING_ACQ_REL} for x86 and
arm64 separately. There will be more to be done in order to support the
dirty ring for arm64.
Lets add helper kvm_dirty_ring_init() to enable the dirty ring. With this,
the code looks a bit clean.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the last stage of live migration or memory slot removal, the
backup bitmap needs to be synchronized when it has been enabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The global dirty log synchronization is used when KVM and dirty ring
are enabled. There is a particularity for ARM64 where the backup
bitmap is used to track dirty pages in non-running-vcpu situations.
It means the dirty ring works with the combination of ring buffer
and backup bitmap. The dirty bits in the backup bitmap needs to
collected in the last stage of live migration.
In order to identify the last stage of live migration and pass it
down, an extra parameter is added to the relevant functions and
callbacks. This last stage indicator isn't used until the dirty
ring is enabled in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disconnect guest tlb parameters from TCG compilation.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_LONG_BITS within tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we do this inside gen_empty_mem_cb anyway, let's
do this earlier inside tcg expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As do_gen_mem_cb is called once, merge it into gen_empty_mem_cb.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As gen_mem_wrapped is only used in plugin_gen_empty_mem_callback,
we can avoid the curiosity of union mem_gen_fn by inlining it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Adjust tcg_out_{ld,st}_helper_args to match.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already pass uint64_t to restore_state_to_opc; this changes all
of the other uses from insn_start through the encoding to decoding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is an edge condition prior to gcc13 for which optimization
is required to generate 16-byte atomic sequences. Detect this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG backends may need to defer to a helper to implement
the atomicity required by a given operation. Mirror the
interface used in system mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create ldst_atomicity.c.inc.
Not required for user-only code loads, because we've ensured that
the page is read-only before beginning to translate code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, use
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, pull out
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like cpu_in_exclusive_context, but also true if
there is no other cpu against which we could race.
Use it in tb_flush as a direct replacement.
Use it in cpu_loop_exit_atomic to ensure that there
is no loop against cpu_exec_step_atomic.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The round-robin scheduler will iterate over the CPU list with an
assigned budget until the next timer expiry and may exit early because
of a TB exit. This is fine under normal operation but with icount
enabled and SMP it is possible for a CPU to be starved of run time and
the system live-locks.
For example, booting a riscv64 platform with '-icount
shift=0,align=off,sleep=on -smp 2' we observe a livelock once the kernel
has timers enabled and starts performing TLB shootdowns. In this case
we have CPU 0 in M-mode with interrupts disabled sending an IPI to CPU
1. As we enter the TCG loop, we assign the icount budget to next timer
interrupt to CPU 0 and begin executing where the guest is sat in a busy
loop exhausting all of the budget before we try to execute CPU 1 which
is the target of the IPI but CPU 1 is left with no budget with which to
execute and the process repeats.
We try here to add some fairness by splitting the budget across all of
the CPUs on the thread fairly before entering each one. The CPU count
is cached on CPU list generation ID to avoid iterating the list on each
loop iteration. With this change it is possible to boot an SMP rv64
guest with icount enabled and no hangs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-3-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A copy-paste bug had us looking at the victim cache for writes.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: 08dff435e2 ("tcg: Probe the proper permissions for atomic ops")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230505204049.352469-1-richard.henderson@linaro.org>
The load side can use a relaxed load, which will surely happen before
the work item is run by async_safe_run_on_cpu() or before double-checking
under mmap_lock. The store side can use an atomic RMW operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the old type was correct in the ideal sense, some ABIs require
the argument to be zero-extended. Using uint32_t for all such values
is a decent compromise.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At least RISC-V has the need to be able to perform a read
using execute permissions, outside of translation.
Add helpers to facilitate this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-9-richard.henderson@linaro.org>
Message-Id: <20230412114333.118895-9-richard.henderson@linaro.org>
Add tcg expander and helper functions for and-compliment
vector with scalar operand.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Message-Id: <20230428144757.57530-10-lawrence.hunter@codethink.co.uk>
[rth: Split out of larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When PMP entry overlap part of the page, we'll set the tlb_size to 1, which
will make the address in tlb entry set with TLB_INVALID_MASK, and the next
access will again go through tlb_fill.However, this way will not work in
tb_gen_code() => get_page_addr_code_hostp(): the TLB host address will be
cached, and the following instructions can use this host address directly
which may lead to the bypass of PMP related check.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1542.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230422130329.23555-6-liweiwei@iscas.ac.cn>
Currently we report whether the TCG accelerator is in
'one-insn-per-tb' mode in the 'info status' output. This is a pretty
minor piece of TCG specific information, and we want to deprecate the
'singlestep' field of the associated QMP command. Move the
'one-insn-per-tb' reporting to 'info jit'.
We don't need a deprecate-and-drop period for this because the
HMP interface has no stability guarantees.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-8-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This commit adds 'one-insn-per-tb' as a property on the TCG
accelerator object, so you can enable it with
-accel tcg,one-insn-per-tb=on
It has the same behaviour as the existing '-singlestep' command line
option. We use a different name because 'singlestep' has always been
a confusing choice, because it doesn't have anything to do with
single-stepping the CPU. What it does do is force TCG emulation to
put one guest instruction in each TB, which can be useful in some
situations (such as analysing debug logs).
The existing '-singlestep' commandline options are decoupled from the
global 'singlestep' variable and instead now are syntactic sugar for
setting the accel property. (These can then go away after a
deprecation period.)
The global variable remains for the moment as:
* what the TCG code looks at to change its behaviour
* what HMP and QMP use to query and set the behaviour
In the following commits we'll clean those up to not directly
look at the global variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230417164041.684562-2-peter.maydell@linaro.org
It's possible that we want to reap a dirty ring on a vcpu that is during
creation, because the vcpu is put onto list (CPU_FOREACH visible) before
initialization of the structures. In this case:
qemu_init_vcpu
x86_cpu_realizefn
cpu_exec_realizefn
cpu_list_add <---- can be probed by CPU_FOREACH
qemu_init_vcpu
cpus_accel->create_vcpu_thread(cpu);
kvm_init_vcpu
map kvm_dirty_gfns <--- kvm_dirty_gfns valid
Don't try to reap dirty ring on vcpus during creation or it'll crash.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2124756
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1d14deb6684bcb7de1c9633c5bd21113988cc698.1676563222.git.huangy81@chinatelecom.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assign pc and use store_release to assign tb.
Fixes: 2dd5b7a1b9 ("accel/tcg: Move jmp-cache `CF_PCREL` checks to caller")
Reported-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUs often set CF_PCREL in tcg_cflags before qemu_init_vcpu(), in which
tcg_cflags will be overwrited by tcg_cpu_init_cflags().
Fixes: 4be790263f ("accel/tcg: Replace `TARGET_TB_PCREL` with `CF_PCREL`")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Message-Id: <20230331150609.114401-6-liweiwei@iscas.ac.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Properly truncate tb_last to the end of the page; the comment about
tb_end being past the end of the page being ok is not correct,
considering overflow.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Fixes a bug in the loop comparision where "<= end" would lock
one more page than required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass the address of the last byte to be changed, rather than
the first address past the last byte. This avoids overflow
when the last page of the address space is involved.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1528
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu-user can hang in a multi-threaded fork. One common
reason is that when creating a TB, between fork and exec
we manipulate a GTree whose memory allocator (GSlice) is
not fork-safe.
Although POSIX does not mandate it, the system's allocator
(e.g. tcmalloc, libc malloc) is probably fork-safe.
Fix some of these hangs by using QTree, which uses the system's
allocator regardless of the Glib version that we used at
configuration time.
Tested with the test program in the original bug report, i.e.:
```
void garble() {
int pid = fork();
if (pid == 0) {
exit(0);
} else {
int wstatus;
waitpid(pid, &wstatus, 0);
}
}
void supragarble(unsigned depth) {
if (depth == 0)
return ;
std::thread a(supragarble, depth-1);
std::thread b(supragarble, depth-1);
garble();
a.join();
b.join();
}
int main() {
supragarble(10);
}
```
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/285
Reported-by: Valentin David <me@valentindavid.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230205163758.416992-3-cota@braap.org>
[rth: Add QEMU_DISABLE_CFI for all callback using functions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When dm_restrict is set, QEMU isn't permitted to update the XenStore node
to indicate its running status. Previously, the xs_write() call would fail
but the failure was ignored.
However, in refactoring to allow for emulated XenStore operations, a new
call to xs_open() was added. That one didn't fail gracefully, causing a
fatal error when running in dm_restrict mode.
Partially revert the offending patch, removing the additional call to
xs_open() because the global 'xenstore' variable is still available; it
just needs to be used with qemu_xen_xs_write() now instead of directly
with the xs_write() libxenstore function.
Also make the whole thing conditional on !xen_domid_restrict. There's no
point even registering the state change handler to attempt to update the
XenStore node when we know it's destined to fail.
Fixes: ba2a92db1f ("hw/xen: Add xenstore operations to allow redirection to internal emulation")
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Co-developed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <1f141995bb61af32c2867ef5559e253f39b0949c.camel@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This had been pulled in from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-6-richard.henderson@linaro.org>
[AJB: also syscall-trace.h]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-16-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Do this in cpu_tb_exec (normal exit) and cpu_loop_exit (exception),
adjacent to where we reset can_do_io.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-12-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Move the tcg_temp_free_* and tcg_temp_ebb_new_* declarations
and inlines to the new header. These are private to the
implementation, and will prevent tcg_temp_free_* from creeping
back into the guest front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continuing the refactor of a48e7d9e52 (gdbstub: move guest debug support
check to ops) by removing hardcoded kvm_enabled() from generic cpu.c
code, and replace it with a property of AccelOpsClass.
Signed-off-by: Mads Ynddal <m.ynddal@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230207131721.49233-1-mads@ynddal.dk>
[AJB: add ifdef around update_guest_debug_ops, fix brace]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-27-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-30-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
This header is now only for native Xen code, not PV backends that may be
used in Xen emulation. Since the toolstack libraries may depend on the
specific version of Xen headers that they pull in (and will set the
__XEN_TOOLS__ macro to enable internal definitions that they depend on),
the rule is that xen_native.h (and thus the toolstack library headers)
must be included *before* any of the headers in include/hw/xen/interface.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
There's no need for this to be in the Xen accel code, and as we want to
use the Xen console support with KVM-emulated Xen we'll want to have a
platform-agnostic version of it. Make it use GString to build up the
path while we're at it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Since all temps allocated by guest front-ends are now TEMP_TB,
and we don't recycle TEMP_TB, there's no point in requiring
that the front-ends free the temps at all. Begin by dropping
the inner-most checks that all temps have been freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes a bug in that we weren't reporting these changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using an atomic write or read-write insn on ROM is basically
a happens-never case. Handle it via stop-the-world, which
will generate non-atomic serial code, where we can correctly
ignore the write while producing the correct read result.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While changes are made to prot within tlb_set_page_full, they are
an implementation detail of softmmu. Retain the original for any
target use of probe_access_full.
Fixes: 4047368938 ("accel/tcg: Introduce tlb_set_page_full")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When CONFIG_PROFILER is set there are various undefined references to
profile_getclock. Include the header which defines this function.
For example:
../tcg/tcg.c: In function ‘tcg_gen_code’:
../tcg/tcg.c:4905:51: warning: implicit declaration of function ‘profile_getclock’ [-Wimplicit-function-declaration]
4905 | qatomic_set(&prof->opt_time, prof->opt_time - profile_getclock());
| ^~~~~~~~~~~~~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230303084948.3351546-1-rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here we are creating a temp whose value needs to be replaced,
but always storing NULL into CPUState.plugin_mem_cbs.
Use tcg_constant_ptr(0) explicitly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All of these uses have quite local scope.
Avoid tcg_const_*, because we haven't added a corresponding
interface for TEMP_EBB. Use explicit tcg_gen_movi_* instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Write back the number of insns that we attempt to translate,
so that if we longjmp out we have a more accurate limit for
the next attempt. This results in fewer restarts when some
limit is consumed by few instructions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-13-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tb-jmp-cache.h contains a few small functions that only exist to hide a
CF_PCREL check, however the caller often already performs such a check.
This patch moves CF_PCREL checks from the callee to the caller, and also
removes these functions which now only hide an access of the jmp-cache.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-12-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The default number of PIRQs is set to 256 to avoid issues with 32-bit MSI
devices. Allow it to be increased if the user desires.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This just initializes the basic Xen support in KVM for now. Only permitted
on TYPE_PC_MACHINE because that's where the sysbus devices for Xen heap
overlay, event channel, grant tables and other stuff will exist. There's
no point having the basic hypercall support if nothing else works.
Provide sysemu/kvm_xen.h and a kvm_xen_get_caps() which will be used
later by support devices.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Also set XEN_ATTACH mode in xen_init() to reflect the truth; not that
anyone ever cared before. It was *only* ever checked in xen_init_pv()
before.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Change to match the recent change to probe_access_flags.
All existing callers updated to supply 0, so no change in behaviour.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_flags() as it is today uses probe_access_full(), which in
turn uses probe_access_internal() with size = 0. probe_access_internal()
then uses the size to call the tlb_fill() callback for the given CPU.
This size param ('fault_size' as probe_access_internal() calls it) is
ignored by most existing .tlb_fill callback implementations, e.g.
arm_cpu_tlb_fill(), ppc_cpu_tlb_fill(), x86_cpu_tlb_fill() and
mips_cpu_tlb_fill() to name a few.
But RISC-V riscv_cpu_tlb_fill() actually uses it. The 'size' parameter
is used to check for PMP (Physical Memory Protection) access. This is
necessary because PMP does not make any guarantees about all the bytes
of the same page having the same permissions, i.e. the same page can
have different PMP properties, so we're forced to make sub-page range
checks. To allow RISC-V emulation to do a probe_acess_flags() that
covers PMP, we need to either add a 'size' param to the existing
probe_acess_flags() or create a new interface (e.g.
probe_access_range_flags).
There are quite a few probe_* APIs already, so let's add a 'size' param
to probe_access_flags() and re-use this API. This is done by open coding
what probe_access_full() does inside probe_acess_flags() and passing the
'size' param to probe_acess_internal(). Existing probe_access_flags()
callers use size = 0 to not change their current API usage. 'size' is
asserted to enforce single page access like probe_access() already does.
No behavioral changes intended.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230223234427.521114-2-dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy part of the description of commit f7b78602fd ("accel/tcg:
Add cluster number to TCG TB hash") in tcg_cpu_init_cflags(),
improving a bit CPUState::cluster_index documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230216142338.82982-2-philmd@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Silent when compiling with -Wextra:
../accel/kvm/kvm-all.c:2291:17: warning: missing field 'num' initializer [-Wmissing-field-initializers]
{ NULL, }
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221220143532.24958-3-philmd@linaro.org>
Unused since introduction in commit 04b0de0ee8
("xen: factor out common functions").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20230215153451.30626-1-philmd@linaro.org>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Rename 'hmp.c' as 'monitor.c' and move the QMP functions from
cpu-exec.c (which is always compiled) to monitor.c (which is only
compiled when system-emulation is selected).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-2-philmd@linaro.org>
Both insert/remove_breakpoint() handlers are used in system and
user emulation. We can not use the 'hwaddr' type on user emulation,
we have to use 'vaddr' which is defined as "wide enough to contain
any #target_ulong virtual address".
gdbstub.c doesn't require to include "exec/hwaddr.h" anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-4-philmd@linaro.org>
If an instruction straddles a page boundary, and the first page
was ram, but the second page was MMIO, we would abort. Handle
this as if both pages are MMIO, by setting the ram_addr_t for
the first page to -1.
Reported-by: Sid Manning <sidneym@quicinc.com>
Reported-by: Jørgen Hansen <Jorgen.Hansen@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
This will allow targets to avoid rolling their own.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are not yet considering atomicity of the 16-byte value;
this is a direct replacement for the current target code which
uses a pair of 8-byte operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
After commit 4e4fa6c12d ("accel/tcg: Complete cpu initialization
before registration"), it looks the CPUJumpCache pointer can be NULL.
This causes a SIGSEV when running debug-wp-migration kvm unit test.
At the first place it should be clarified why this TCG code is called
with KVM acceleration. This may hide another bug.
Fixes: 4e4fa6c12d ("accel/tcg: Complete cpu initialization before registration")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230203171510.2867451-1-eric.auger@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This moves these commands from MAINTAINERS section "QMP" to new
section "Stats". Status is Orphan. Volunteers welcome!
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-23-armbru@redhat.com>
There are actually a whole bunch of helpers that don't affect memory
that we shouldn't instrument. They are helpfully identified by the
TCG_CALL_NO_SIDE_EFFECTS flag which marks out lookup_tb_ptr as well as
a lot of the maths helpers. To avoid the string compare we introduce a
new flag for plugin internals so we skip that too.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-4-cota@braap.org>
[AJB: updated to skip all no SE plugins, add flag for plugin helper]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-34-alex.bennee@linaro.org>
We were mistakenly checking tcg_ctx->plugin_insn as a canary to know
whether the TB had emitted helpers that might have accessed memory.
The problem is that tcg_ctx->plugin_insn gets updated on every
instruction in the TB, which results in us wrongly performing the
optimization (i.e. not clearing cpu->plugin_mem_cbs) way too often,
since it's not rare that the last instruction in the TB doesn't
use helpers.
Fix it by tracking a per-TB canary.
While at it, expand documentation.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-32-alex.bennee@linaro.org>
Fixes the appended use-after-free. The root cause is that
during tb invalidation we use CPU_FOREACH, and therefore
to safely free a vCPU we must wait for an RCU grace period
to elapse.
$ x86_64-linux-user/qemu-x86_64 tests/tcg/x86_64-linux-user/munmap-pthread
=================================================================
==1800604==ERROR: AddressSanitizer: heap-use-after-free on address 0x62d0005f7418 at pc 0x5593da6704eb bp 0x7f4961a7ac70 sp 0x7f4961a7ac60
READ of size 8 at 0x62d0005f7418 thread T2
#0 0x5593da6704ea in tb_jmp_cache_inval_tb ../accel/tcg/tb-maint.c:244
#1 0x5593da6704ea in do_tb_phys_invalidate ../accel/tcg/tb-maint.c:290
#2 0x5593da670631 in tb_phys_invalidate__locked ../accel/tcg/tb-maint.c:306
#3 0x5593da670631 in tb_invalidate_phys_page_range__locked ../accel/tcg/tb-maint.c:542
#4 0x5593da67106d in tb_invalidate_phys_range ../accel/tcg/tb-maint.c:614
#5 0x5593da6a64d4 in target_munmap ../linux-user/mmap.c:766
#6 0x5593da6dba05 in do_syscall1 ../linux-user/syscall.c:10105
#7 0x5593da6f564c in do_syscall ../linux-user/syscall.c:13329
#8 0x5593da49e80c in cpu_loop ../linux-user/x86_64/../i386/cpu_loop.c:233
#9 0x5593da6be28c in clone_func ../linux-user/syscall.c:6633
#10 0x7f496231cb42 in start_thread nptl/pthread_create.c:442
#11 0x7f49623ae9ff (/lib/x86_64-linux-gnu/libc.so.6+0x1269ff)
0x62d0005f7418 is located 28696 bytes inside of 32768-byte region [0x62d0005f0400,0x62d0005f8400)
freed by thread T148 here:
#0 0x7f49627b6460 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x5593da5ac057 in cpu_exec_unrealizefn ../cpu.c:180
#2 0x5593da81f851 (/home/cota/src/qemu/build/qemu-x86_64+0x484851)
Signed-off-by: Emilio Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111151628.320011-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-27-alex.bennee@linaro.org>
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221131435.3851212-5-armbru@redhat.com>
[Semantic rebase conflict with 7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop overloading jmp_target_arg for both offset and address,
depending on TCG_TARGET_HAS_direct_jump. Instead, add a new
field to hold the jump insn offset and always set the target
address in jmp_target_addr[]. This will allow a tcg backend
to use either direct or indirect depending on displacement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This can replace four other variables that are references
into the TranslationBlock structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will shortly be used for more than reset.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recently the g_assert(cpu == current_cpu) test has been
intermittently failing with gcc. Reorg the code around
the setjmp to minimize the lifetime of the cpu variable
affected by the setjmp.
This appears to fix the existing issue with clang as well.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1147
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.
This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If we update an existing memslot (e.g., resize, split), we temporarily
remove the memslot to re-add it immediately afterwards. These updates
are not atomic, especially not for KVM VCPU threads, such that we can
get spurious faults.
Let's inhibit most KVM ioctls while performing relevant updates, such
that we can perform the update just as if it would happen atomically
without additional kernel support.
We capture the add/del changes and apply them in the notifier commit
stage instead. There, we can check for overlaps and perform the ioctl
inhibiting only if really required (-> overlap).
To keep things simple we don't perform additional checks that wouldn't
actually result in an overlap -- such as !RAM memory regions in some
cases (see kvm_set_phys_mem()).
To minimize cache-line bouncing, use a separate indicator
(in_ioctl_lock) per CPU. Also, make sure to hold the kvm_slots_lock
while performing both actions (removing+re-adding).
We have to wait until all IOCTLs were exited and block new ones from
getting executed.
This approach cannot result in a deadlock as long as the inhibitor does
not hold any locks that might hinder an IOCTL from getting finished and
exited - something fairly unusual. The inhibitor will always hold the BQL.
AFAIKs, one possible candidate would be userfaultfd. If a page cannot be
placed (e.g., during postcopy), because we're waiting for a lock, or if the
userfaultfd thread cannot process a fault, because it is waiting for a
lock, there could be a deadlock. However, the BQL is not applicable here,
because any other guest memory access while holding the BQL would already
result in a deadlock.
Nothing else in the kernel should block forever and wait for userspace
intervention.
Note: pause_all_vcpus()/resume_all_vcpus() or
start_exclusive()/end_exclusive() cannot be used, as they either drop
the BQL or require to be called without the BQL - something inhibitors
cannot handle. We need a low-level locking mechanism that is
deadlock-free even when not releasing the BQL.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the new accel-blocker API, mark where ioctls are being called
in KVM. Next, we will implement the critical section that will take
care of performing memslots modifications atomically, therefore
preventing any new ioctl from running and allowing the running ones
to finish.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This API allows the accelerators to prevent vcpus from issuing
new ioctls while execting a critical section marked with the
accel_ioctl_inhibit_begin/end functions.
Note that all functions submitting ioctls must mark where the
ioctl is being called with accel_{cpu_}ioctl_begin/end().
This API requires the caller to always hold the BQL.
API documentation is in sysemu/accel-blocker.h
Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt
(to minimize cache line bouncing) to keep avoid that new ioctls
run when the critical section starts, and a QemuEvent to wait
that all running ioctls finish.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221111154758.1372674-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO3Ym0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNYmwf+LHEw+4T0fk1+2NfgIzH3+8s1EqDm
Ai56EjxO/p5NUptflXAnhn4P3LawswmmNE0ZIFFFBgwG5E9L+Jj/u5efuLu4uYPg
bboEBDn8nxSNN2l08u9TyS6kSWSxbwwrs7i2+V+4uQIlVIcCHu+A0vpXns4vWwY0
zZGF8CgJKDQdPIxdXrH8+6/xtadQ8uDkYsAWDiY/nhozCsCUTAZGTXWEQbHJLARI
Z4X+Cmz/NFB9G4ka6K/y0HbQw99KA8G/EMPUSglN0ya10yjpyzrmeI7IlIves+5U
8lhCZXyBhaV9GXlIK1vIgEXlHf83C19a+v0DpW0bpxK631n2VR5y3CArBg==
=2Koq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
i386: SGX: remove deprecated member of SGXInfo
target/i386: Add SGX aex-notify and EDECCSSA support
util: remove support -chardev tty and -chardev parport
util: remove support for hex numbers with a scaling suffix
KVM: remove support for kernel-irqchip=off
docs: do not talk about past removal as happening in the future
meson: accept relative symlinks in "meson introspect --installed" data
meson: cleanup compiler detection
meson: support meson 0.64 -Doptimization=plain
configure: test all warnings
tests/qapi-schema: remove Meson workaround
meson: cleanup dummy-cpus.c rules
meson: tweak hardening options for Windows
configure: remove backwards-compatibility and obsolete options
configure: preserve qemu-ga variables
configure: cleanup $cpu tests
configure: remove dead function
configure: remove useless write_c_skeleton
ide: Add "ide-cf" driver, a CompactFlash card
ide: Add 8-bit data mode
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that qtest is available on all targets including Windows, dummy-cpus.c
is included unconditionally in the build. It also does not need to be
compiled per-target.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As in page_get_flags, we need to try again with the mmap
lock held if we fail a page lookup.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because we allow lockless lookups, we have to be careful
when it is freed. Use rcu to delay the free until safe.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When called from syscall(), we are not within a TB and pc == 0.
We can skip the check for invalidating the current TB.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Better to re-use the existing function for copying ops.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We copied all of the arguments in copy_op_nocheck.
We only need to replace the one argument that we change.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function pointer is immediately after the output and input
operands; no need to search.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Narrow the scope of the lock to the actual read/write,
moving the cpu_transation_failed call outside the lock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only the system emulation part of TB maintainance uses the
page_collection structure. Restrict its declaration (and the
functions requiring it) to tb-maint.c.
Convert the 'len' argument of tb_invalidate_phys_page_fast__locked()
from signed to unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emphasize this function is called with pages locked.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-4-philmd@linaro.org>
[rth: Use "__locked" suffix, to match other instances.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit d9bb58e510 ("tcg: move tcg related files into accel/tcg/
subdirectory") introduced accel/tcg/trace-events, so we don't
need to use the root trace-events anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Missed in commit 6526919224 ("accel/tcg: Restrict cpu_io_recompile()
from other accelerators").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only thing that still touches PageDesc in translate-all.c
are some locking routines related to tb-maint.c which have not
yet been moved. Do so now.
Move some code up in tb-maint.c as well, to untangle the maze
of ifdefs, and allow a sensible final ordering.
Move some declarations from exec/translate-all.h to internal.h,
as they are only used within accel/tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that PageDesc is not used for user-only, and for system
it is only used for tb maintenance, move the implementation
into tb-main.c appropriately ifdefed.
We have not yet eliminated all references to PageDesc for
user-only, so retain a typedef to the structure without definition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This page tracking implementation is specific to user-only,
since the system softmmu version is in cputlb.c. Move it
out of translate-all.c to user-exec.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make bsd-user match linux-user in not marking host pages
as reserved. This isn't especially effective anyway, as
it doesn't take into account any heap memory that qemu
may allocate after startup.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Tested-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Continue weaning user-only away from PageDesc.
Use an interval tree to record target data.
Chunk the data, to minimize allocation overhead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Begin weaning user-only away from PageDesc.
Since, for user-only, all TB (and page) manipulation is done with
a single mutex, and there is no virtual/physical discontinuity to
split a TB across discontinuous pages, place all of the TBs into
a single IntervalTree. This makes it trivial to find all of the
TBs intersecting a range.
Retain the existing PageDesc + linked list implementation for
system mode. Move the portion of the implementation that overlaps
the new user-only code behind the common ifdef.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to tb_remove_all, to remove the PageDesc "page" from the name,
and to avoid suggesting a "flush" in the icache sense.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 012d4c96e2 changed the visitor functions taking Error ** to
return bool instead of void, and the commits following it used the new
return value to simplify error checking. Since then a few more uses
in need of the same treatment crept in. Do that. All pretty
mechanical except for
* balloon_stats_get_all()
This is basically the same transformation commit 012d4c96e2 applied
to the virtual walk example in include/qapi/visitor.h.
* set_max_queue_size()
Additionally replace "goto end of function" by return.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
