The PURR (Processor Utilization Resource Register) is a register found
on recent POWER CPUs. The guts of implementing it at least enough to
get by are already present in qemu, however some of the helper
functions needed to actually wire it up are missing.
This patch adds the necessary glue, so that the PURR can be wired up
when we implement newer POWER CPU targets which include it.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
For a 64-bit PowerPC target, qemu correctly implements translation
through the segment lookaside buffer. Likewise it supports the
slbmte instruction which is used to load entries into the SLB.
However, it does not emulate the slbmfee and slbmfev instructions
which read SLB entries back into registers. Because these are
only occasionally used in guests (mostly for debugging) we get
away with it.
However, given the recent SLB cleanups, it becomes quite easy to
implement these, and thereby allow, amongst other things, a guest
Linux to use xmon's command to dump the SLB.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PowerPC and POWER chips since the POWER4 and 970 have a special
hypervisor mode, and a corresponding form of the system call
instruction which traps to the hypervisor.
qemu currently has stub implementations of hypervisor mode. That
is, the outline is there to allow qemu to run a PowerPC hypervisor
under emulation. There are a number of details missing so this
won't actually work at present, but the idea is there.
What there is no provision at all, is for qemu to instead emulate
the hypervisor itself. That is to have hypercalls trap into qemu
and their result be emulated from qemu, rather than running
hypervisor code within the emulated system.
Hypervisor hardware aware KVM implementations are in the works and
it would be useful for debugging and development to also allow
full emulation of the same para-virtualized guests as such a KVM.
Therefore, this patch adds a hook which will allow a machine to
set up emulation of hypervisor calls.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the SLB information when emulating a PowerPC 970 is
storeed in a structure with the unhelpfully named fields 'tmp'
and 'tmp64'. While the layout in these fields does match the
description of the SLB in the architecture document, it is not
convenient either for looking up the SLB, or for emulating the
slbmte instruction.
This patch, therefore, reorganizes the SLB entry structure to be
divided in the the "ESID related" and "VSID related" fields as
they are divided in instructions accessing the SLB.
In addition to making the code smaller and more readable, this will
make it easier to implement for the 1TB segments used in more
recent PowerPC chips.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the return code of kvm_arch_handle_exit directly usable for
kvm_cpu_exec. This is straightforward for x86 and ppc, just s390
would require more work. Avoid this for now by pushing the return code
translation logic into s390's kvm_arch_handle_exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We will broaden the scope of this function on x86 beyond irqchip events.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Commit 7a39fe5882 failed to convert the right arch function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
All implementations are now the same, and there is only one caller,
so inline the function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We do not check them, and the only arch with non-empty implementations
always returns 0 (this is also true for qemu-kvm).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Provide arch-independent kvm_on_sigbus* stubs to remove the #ifdef'ery
from cpus.c. This patch also fixes --disable-kvm build by providing the
missing kvm_on_sigbus_vcpu kvm-stub.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of splattering the code with #ifdefs and runtime checks for
capabilities we cannot work without anyway, provide central test
infrastructure for verifying their availability both at build and
runtime.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Ensure that we stop the guest whenever we face a fatal or unknown exit
reason. If we stop, we also have to enforce a cpu loop exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Some tests in FPU emulation code were wrongly using float64_is_nan()
before commit 185698715d, and wrongly
using float64_is_quiet_nan() after. Fix them by using float64_is_any_nan()
instead.
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current FPU code returns 0.0 if one of the operand is a
signaling NaN and the VXSNAN exception is disabled.
fload_invalid_op_excp() doesn't return a qNaN in case of a VXSNAN
exception as the operand should be propagated instead of a new
qNaN to be generated. Fix that by calling fload_invalid_op_excp()
only for the exception generation (if enabled), and use the softfloat
code to correctly compute the result.
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new function float32_is_any_nan() instead of
float32_is_quiet_nan() || float32_is_signaling_nan().
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The PRECISE_EMULATION is "hardcoded" to one in target-ppc/exec.h and not
something easily tunable. Remove it and non-precise emulation code as
it doesn't make a noticeable difference in speed. People wanting speed
improvement should use softfloat-native instead.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The softfloat functions float*_is_nan() were badly misnamed,
because they return true only for quiet NaNs, not for all NaNs.
Rename them to float*_is_quiet_nan() to more accurately reflect
what they do.
This change was produced by:
perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan)
(with the results manually checked.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
I get a warning on a signed comparison with an unsigned variable, so
let's make the variable signed and be happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/target-ppc/op_helper.c: In function 'helper_icbi':
/src/qemu/target-ppc/op_helper.c:351:14: error: variable 'tmp' set but not used [-Werror=unused-but-set-variable]
/src/qemu/target-ppc/op_helper.c: In function 'do_6xx_tlb':
/src/qemu/target-ppc/op_helper.c:3805:28: error: variable 'EPN' set but not used [-Werror=unused-but-set-variable]
/src/qemu/target-ppc/op_helper.c: In function 'do_74xx_tlb':
/src/qemu/target-ppc/op_helper.c:3838:28: error: variable 'EPN' set but not used [-Werror=unused-but-set-variable]
Fix by adding a dummy cast so that the variable is not unused. Delete tmp.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.
Remove video.x MoL hacks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* Fix swapped reading of tlblo/hi.
* Fix tlb exec permissions
Signed-off-by: John Clark <clarkjc@runbox.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Add a powerpc 440x5 with the model ID on the Xilinx virtex5.
Connect the 440x5 to the 40x interrupt logic.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The hack added by c5b76b3810 was not
enough to avoid warnings with gcc flag -Wtype-limits. Add a new macro
to fix both problems.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to the Book3S spec, the interrupt context starts with an MSR
value that is rather simple. If we leave out the HV case, it's almost
always 0.
To reflect this, let's redesign the way that MSR value gets calculated.
Using this, we also squash the bug where MSR_POW can slip through into
the interrupt handler MSR.
Reported-by: Thomas Monjalon <thomas.monjalon@openwide.fr>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The lwarx and ldarx instructions have a bit to give some hint to the
CPU which is safe to ignore. We currently refuse to accept any instruction
with that bit set, as it used to be declared MBZ.
Let's remove the reserved bit and make the instruction work as expected.
This fixes Linux boot for ppc64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
KVM on PowerPC used to have completely broken interrupt logic. Usually,
interrupts work by having a PIC that pulls a line up/down, so the CPU knows
that an interrupt is active. This line stays active until some action is
done to the PIC to release the line.
On KVM for PPC, we just checked if there was an interrupt pending and pulled
a line in the kernel module. We never released it though, hoping that kernel
space would just declare an interrupt as released when injected - which is
wrong.
To fix this, we need to completely redesign the interrupt injection logic.
Whenever an interrupt line gets triggered, we need to notify kernel space
that the line is up. Whenever it gets released, we do the same. This way
we can assure that the interrupt state is always known to kernel space.
This fixes random stalls in KVM guests on PowerPC that were waiting for
an interrupt while everyone else thought they received it already.
Signed-off-by: Alexander Graf <agraf@suse.de>
On KVM for PPC we need to tell the guest which instructions to use when
doing a hypercall. The clean way to do this is to go through an ioctl
from userspace and passing it on to the guest using the device tree.
So let's do the qemu part here: read out the hypercall and pass it on
to the guest's fw_cfg so openBIOS can read it out and expose it again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Some hosts (amd64, ia64) have an ABI that ignores the high bits
of the 64-bit register when passing 32-bit arguments. Others
require the value to be properly sign-extended for the type.
I.e. "int32_t" must be sign-extended and "uint32_t" must be
zero-extended to 64-bits.
To effect this, extend the "sizemask" parameter to tcg_gen_callN
to include the signedness of the type of each parameter. If the
tcg target requires it, extend each 32-bit argument into a 64-bit
temp and pass that to the function call.
This ABI feature is required by sparc64, ppc64 and s390x.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This line was a bit clear.
The next lines set or reset this bit (LE) depending of another bit (ILE).
So the first line is useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit 2ada0ed, "Return From Interrupt" is broken for PPC processors
because some interrupt specifics bits of SRR1 are copied to MSR.
SRR1 is a save of MSR during interrupt.
During RFI, MSR must be restored from SRR1.
But some bits of SRR1 are interrupt-specific and are not used for MSR saving.
This is the specification (ISA 2.06) at chapter 6.4.3 (Interrupt Processing):
"2. Bits 33:36 and 42:47 of SRR1 or HSRR1 are loaded with information specific
to the interrupt type.
3. Bits 0:32, 37:41, and 48:63 of SRR1 or HSRR1 are loaded with a copy of the
corresponding bits of the MSR."
Below is a representation of MSR bits which are not saved:
0:15 16:31 32 33:36 37:41 42:47 48:63
——— | ——— | — X X X X — — — — — X X X X X X | ————
0000 0000 | 7 | 8 | 3 | F | 0000
History:
In the initial Qemu implementation (e1833e1), the mask 0x783F0000 was used for
saving MSR in SRR1. But all the bits 32:47 were cleared during RFI restoring.
This was wrong. The commit 2ada0ed explains that this breaks Altivec.
Indeed, bit 38 (for Altivec support) must be saved and restored.
The change of 2ada0ed was to restore all the bits of SRR1 to MSR.
But it's also wrong.
Explanation:
As an example, let's see what's happening after a TLB miss.
According to the e300 manual (E300CORERM table 5-6), the TLB miss interrupts
set the bits 44-47 for KEY, I/D, WAY and S/L. These bits are specifics to the
interrupt and must not be copied into MSR at the end of the interrupt.
With the current implementation, a TLB miss overwrite bits POW, TGPR and ILE.
Fix:
It shouldn't be needed to filter-out bits on MSR saving when interrupt occurs.
Specific bits overwrite MSR ones in SRR1.
But at the end of interrupt (RFI), specifics bits must be cleared before
restoring MSR from SRR1. The mask 0x783F0000 apply here.
Discussion:
The bits of the mask 0x783F0000 are cleared after an interrupt.
I cannot find a specification which talks about this
but I assume it is the truth since Linux can run this way.
Maybe it's not perfect but it's better (works for e300).
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When running with --enable-io-thread the timer we have doesn't help,
because it doesn't wake up the CPU thread. So instead we need to
actually kick it.
While at it I refined the logic a bit to not dumbly trigger a timer
every 500ms, but rather do it more often after an interrupt got injected.
If there's no level based interrupt to be expected, we don't need the
timer anyways.
This makes qemu-system-ppc with --enable-io-thread work when using KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Continue vcpu execution in case emulation failure happened while vcpu
was in userspace. In this case #UD will be injected into the guest
allowing guest OS to kill offending process and continue.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Time base SPRs TBL/TBU should be accessible in user/priv modes for reading
as specified in POWER ISA documentation. Therefore SPRs permissions were
changed in gen_tbl function.
Signed-off-by: Dmitry Ilyevsky <ilyevsky@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
QEMU uses a fixed page size for the CPU TLB. If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page. However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.
Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages. If the guest invalidates this region then flush the
whole TLB.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Removes a set of ifdefs from exec.c.
Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha. This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Invalid opcode messages can be perfectly normal, for example if this
code is never executed. Don't print an error message on the console,
but keep the message in the log for debugging purposes.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The shifts in the gen_evsplat* functions were expecting rA to be masked,
not extracted, and so used the wrong shift amounts to sign-extend or pad
with zeroes.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The CRF_{CH,CL,CH_OR_CL,CH_AND_CL} constants were all off by one bit
position. Because of this, the SPE evcmp* family of instructions would
store values in the result condition register that were also off by one
bit position.
Fixed by using the CRF_{LT,GT,EQ,SO} constants for the shift amounts.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For some odd reason we sometimes hang inside KVM forever. I'd guess it's
a race condition where we actually have a level triggered interrupt, but
the infrastructure can't expose that yet, so the guest ACKs it, goes to
sleep and never gets notified that there's still an interrupt pending.
As a quick workaround, let's just wake up every 500 ms. That way we can
assure that we're always reinjecting interrupts in time.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We were masking 1TB SLB entries on the feature bit of 16 MB pages. Obviously
that breaks, so let's just ignore 1TB SLB entries for now and instead do
16MB pages correctly.
This fixes PPC64 Linux boot with -m above 256.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our guest systems need to know by how much the timebase increases every second,
so there usually is a "timebase-frequency" property in the cpu leaf of the
device tree.
This property is missing in OpenBIOS.
With qemu, Linux's fallback timebase speed and qemu's internal timebase speed
match up. With KVM, that is no longer true. The guest is running at the same
timebase speed as the host.
This leads to massive timing problems. On my test machine, a "sleep 2" takes
about 14 seconds with KVM enabled.
This patch exports the timebase frequency to OpenBIOS, so it can then put them
into the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The recent transition to always have the DCR helper functions take 32 bit
values broke the PPC64 target, as target_long became 64 bits there.
This patch changes DCR helpers to target_long arguments, and cast the values
to 32 bit when needed.
Fixes PPC64 build with --enable-debug-tcg
Based on a patch from Alexander Graf <agraf@suse.de>
Reported-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
My segment sync patch broke compilation on PPC32, because it was trying to
sync the SLB even though ppc32 CPUs don't have an SLB.
So let's only sync it when we're on a PP64 one!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
While x86 only needs to sync cr0-4 to know all about its MMU state and enable
qemu to resolve virtual to physical addresses, we need to sync all of the
segment registers on PPC to know which mapping we're in.
So let's grab the segment register contents to be able to use the "x" monitor
command and also enable the gdbstub to resolve virtual addresses.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
No need to alias e300 core for each CPU package.
Differences between microcontrollers have to be implemented in a higher layer
than translate_init.c
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add CPU declarations of MPC8343, MPC8343E, MPC8347 and MPC8347E.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Declare HID2 register.
Use high BATs for e300 (8 instead of 4).
Fix index of high BATs registers.
Before the fix, IBAT4-7 were overwriting IBAT0-3.
Signed-off-by: François Armand <francois.armand@os4i.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
handle_cpu_signal is very nearly copy-paste code for each target, with a
few minor variations. This patch sets up appropriate defaults for a
generic handle_cpu_signal and provides overrides for particular targets
that did things differently. Fixing things like the persistent (XXX:
use sigsetjmp) should now become somewhat easier.
Previous comments on this patch suggest that the "activate soft MMU for
this block" comments refer to defunct functionality. I have removed
such blocks for the appropriate targets in this patch.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We do this so we can check on the corresponding stc{w,d}x. whether the
value has changed. It's a poor man's form of implementing atomic
operations and is valid only for NPTL usermode Linux emulation.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
We only need to make sure that the clone syscall looks like it
succeeded, not clobber 60% of the register set.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
440 and desktop codes use different input constants for interrupt indication.
Let's use the respective ones for KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need to tell the kernel about some initial CPU state we don't have yet,
so let's use the "sregs" IOCTL for that and simply put the Processor Version
Register in there.
Now the kernel knows which guest CPU to virtualize.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to PPC440 user manual, PPC 440 supports ``mftb'' even it's a
preserved instruction:
PPC440_UM2013.pdf, p.445, table A-3
when I compile a kernel (2.6.30, bamboo_defconfig/440EP &
canyonlands/460EX), I can see ``mftb'' by using ppc-xxx-objdump
vmlinux
I have also checked the ppc 440x[456], 460S, 464, they also should support mftb.
The following patch enable mftb for all ppc 440 variants, including:
440EP, 440GP, 440x4, 440x5 and 460
Signed-off-by: Baojun Wang <wangbj@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For 32-bit PPC targets, we translated:
evmergelo rX, rX, rY
as:
rX-lo = rY-lo
rX-hi = rX-lo
which is wrong, because we should be transferring rX-lo first. This
problem is fixed by swapping the order in which we write the parts of
rX.
Similarly, we translated:
evmergelohi rX, rX, rY
as:
rX-lo = rY-hi
rX-hi = rX-lo
In this case, we can't swap the assignment statements, because that
would just cause problems for:
evmergelohi rX, rY, rX
Instead, we detect the first case and save rX-lo in a temporary
variable:
tmp = rX-lo
rX-lo = rY-hi
rX-hi = tmp
These problems don't occur on PPC64 targets because we don't split the
SPE registers into hi/lo parts for such targets.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Access to the PVR SPR is normally forbidden from userspace apps. The
Linux kernel, however, fixes up reads in the appropriate trap handler.
To permit applications that read PVR to run on QEMU, then, we need to
implement the same handling of PVR reads.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds the missing hooks to allow live migration in KVM mode.
It adds proper synchronization before/after saving/restoring the VCPU
states (note: PPC is untested), hooks into
cpu_physical_memory_set_dirty_tracking() to enable dirty memory logging
at KVM level, and synchronizes that drity log into QEMU's view before
running ram_live_save().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.
Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.
Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Do this so other pieces of code can make decisions based on the
capabilities of the CPU we're emulating.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Include assert.h from qemu-common.h and remove other direct uses.
cpu-all.h still need to include it because of the dyngen-exec.h hacks
Signed-off-by: Paul Brook <paul@codesourcery.com>
According to 604eUM_book (see 8.3.3 Reset inputs p8-54), the IP bit is set
for hreset and the vector is at offset 0x100 from the exception prefix.
No difference in this area between 604 and 604e.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
While searching PC, always store the pc of a new instruction.
Instructions that didn't generate tcg code (such as nop) prevented the
next one to be referenced.
Based on patch for target-alpha, r6930.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6931 c046a42c-6fe2-441c-8c8c-71466251a162
Most 64 bit architectures I'm aware of support running 32 bit code
of the same architecture as well.
So x86_64 can run i386 code easily and ppc64 can run ppc code.
Unfortunately, the current checks are pretty strict. So you can only
load e.g. an x86_64 elf binary on qemu-system-x86_64, but no i386 one.
This can get really annoying. I first encountered this issue with
my multiboot patch, where qemu-system-x86_64 was unable to load an
i386 elf binary because the elf loader rejected it.
The same thing happened again on PPC64 now. The firmware we're loading
is a PPC32 elf binary, as it's shared with PPC32. But the platform is
PPC64.
Right now there is a hack for this in the ppc cpu.h definition, that
simply sets the type to PPC32 in system emulation mode. While that
works fine for the firmware, it's no good if you also want to load a
PPC64 kernel with -kernel.
So in order to solve this mess, I figured the easiest way is to make
the elf loader aware of platforms that are backwards compatible. For
now I was only sure that x86_64 does i386 and ppc64 does ppc32, but
maybe there are other combinations too.
This patch is a prerequisite for having a working -kernel option on
PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6855 c046a42c-6fe2-441c-8c8c-71466251a162
Rename bswap_i32 into bswap32_i32 and bswap_i64 into bswap64_i64
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6829 c046a42c-6fe2-441c-8c8c-71466251a162
Altivec and SPE both have 34 registers in their register sets, not 35
with a missing register 32.
GDB would ask for register 32 of the Altivec (resp. SPE) registers and
the code would claim it had zero width. The QEMU GDB stub code would
then return an E14 to GDB, which would complain about not being sure
whether p packets were supported or not.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6769 c046a42c-6fe2-441c-8c8c-71466251a162
The 970 doesn't know BAT, so let's not search BATs there.
This was only in as a hack for OpenHackWare so it would
work on PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6759 c046a42c-6fe2-441c-8c8c-71466251a162
Real 970 CPUs have the SLB not memory backed, but inside the CPU.
This breaks bridge mode for 970 for now, but at least keeps us from
overwriting physical addresses 0x0 - 0x300, rendering our interrupt
handlers useless.
I put in a stub for bridge mode operation that could be enabled
easily, but for now it's safer to leave that off I guess (970fx doesn't
have bridge mode AFAIK).
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6757 c046a42c-6fe2-441c-8c8c-71466251a162
ctx->nx only got ORed, but never reset. So when one page in the
lifetime of the VM was ever NX, all later pages were too.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6755 c046a42c-6fe2-441c-8c8c-71466251a162
The current implementation masks some MSR bits from SRR1 as it is
given on rfi(d). This looks pretty wrong and breaks Altivec.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6754 c046a42c-6fe2-441c-8c8c-71466251a162
Mtfsf can have the L bit set, so all the register contents get stored
in FPSCR. Linux uses it, so let's implement it.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6753 c046a42c-6fe2-441c-8c8c-71466251a162
Real 970s enable MSR_SF on all interrupts. The current code didn't do
this until now, so let's activate it!
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6752 c046a42c-6fe2-441c-8c8c-71466251a162
Linux tries to access some SPRs on PPC64 boot. Let's just ignore those
for the 970fx for now to make it happy.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6751 c046a42c-6fe2-441c-8c8c-71466251a162
Linux uses tlbiel to flush TLB entries in PPC64 mode. This special TLB
flush opcode only flushes an entry for the CPU it runs on, not across
all CPUs in the system.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6749 c046a42c-6fe2-441c-8c8c-71466251a162
The current SLB/PTE code does not support large pages, which are
required by Linux, as it boots up with the kernel regions up as large.
This patch implements large page support, so we can run Linux.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6748 c046a42c-6fe2-441c-8c8c-71466251a162
In order to modify SLB entries on recent PPC64 machines, the slbmte
instruction is used.
This patch implements the slbmte instruction and makes the "bridge"
mode code use the slb set functions, so we can move the SLB into
the CPU struct later.
This is required for Linux to run on PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6747 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
- use ctz32 instead of ffs - 1
- small optimisation of mtcrf
- add the name of both opcodes
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6669 c046a42c-6fe2-441c-8c8c-71466251a162
This patch add an emulation of MPC8544DS board.
It can work on All E500 platforms.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6663 c046a42c-6fe2-441c-8c8c-71466251a162
A real 970 CPU starts up with HIOR=0xfff00000 and triggers a reset
exception, basically ending up at IP 0xfff001000.
Later on this HIOR has to be set to 0 by the firmware in order to
enable the OS to handle interrupts on its own.
This patch maps HIOR to exec_prefix, which does the same thing
internally in qemu already.
It replaces the previous patch that changed the 970 initialization
constants, as this is the clean solution to the same problem.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6656 c046a42c-6fe2-441c-8c8c-71466251a162
When the CPU is in little endian mode, it should load values from RAM
in byte swapped manner. This check is in all the ld and st functions,
but misspelled in gen_qemu_ld32s.
This patch fixes the misspelling and makes ppc64 Linux happier.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6654 c046a42c-6fe2-441c-8c8c-71466251a162
The e500v1 chips only have single-precision floating point; don't say we
support the double-precision floating-point instructions on such chips.
Also add an e500v1 -cpu argument for a generic e500v1.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6576 c046a42c-6fe2-441c-8c8c-71466251a162
Single-precision and double-precision floating-point instructions should
be separated into their own categories, since some chips only support
single-precision instructions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6575 c046a42c-6fe2-441c-8c8c-71466251a162
These simplify the implementation of the floating-point Altivec
instructions and reduce clutter.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6511 c046a42c-6fe2-441c-8c8c-71466251a162
Do this so we can set float statuses once per mtvscr, rather than once
per Altivec instruction.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6508 c046a42c-6fe2-441c-8c8c-71466251a162
Only one of Altivec and SPE will be available on a given chip.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6506 c046a42c-6fe2-441c-8c8c-71466251a162
Original idea&code by Kevin Wolf, split-up in two patches and added more
archs.
This patch introduces a flag to log CPU resets. Useful for tracing
unexpected resets (such as those triggered by x86 triple faults).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6452 c046a42c-6fe2-441c-8c8c-71466251a162
Don't read/write SPEFSCR until we figure out what to do about exceptions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6425 c046a42c-6fe2-441c-8c8c-71466251a162
These are references to 'loglevel' that aren't on a simple 'if (loglevel &
X) qemu_log()' statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
Use macros to avoid #ifdefs on debugging code.
This patch doesn't try to merge logging macros from different files,
but just unify the debugging code #ifdefs onto a macro on each file. A
further cleanup can unify the debugging macros on a common header, later
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6332 c046a42c-6fe2-441c-8c8c-71466251a162
Based on a patch by Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6190 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
Remove N_ELEMS, VECTOR_FOR, and VECTOR_FOR_I macros. Retain the
VECTOR_FOR_INORDER_I macros as the clearest way of expressing the intent
of iterating over elements in their stored target-endian order.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6153 c046a42c-6fe2-441c-8c8c-71466251a162
This patch removes useless type information in some calls to
tcg_temp_local_new. It also removes the parameter from the
macro declaration; if a target has to use a specific non-default
size then it should use tcg_temp_local_new_{i32,i64}.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6146 c046a42c-6fe2-441c-8c8c-71466251a162
