It is within a large TARGET_PPC64 section from 970 to 620,
so an #endif /* TARGET_PPC64 */ is confusing. Clean this up.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit fe828a4d4b added a new fatal error
message while QOM realize'ification was in flight.
Convert it to return an Error instead of exit()ing.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Unlike derived PVR constants mapped to CPU_POWERPC_G2LEgp3, the
"G2leGP3" model definition itself used the CPU_POWERPC_G2LEgp1 PVR.
Fixing this will allow to alias CPU_POWERPC_G2LEgp3-using types to
"G2leGP3".
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was defined to ..._MPC8545E_v21 rather than ..._MPC8547E_v21.
Due to both resolving to CPU_POWERPC_e500v2_v21 this did not show.
Fixing this nontheless helps with QOM'ifying CPU aliases.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce ENV_OFFSET macros which can be used in non-target-specific
code that needs to generate TCG instructions which reference CPUState
fields given the cpu_env register that TCG targets set up with a
pointer to the CPUArchState struct.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While ~T0+T1+CF = T1-T0+CF-1 is true for the low 32-bits,
it does not produce the correct carry-out to bit 33. Do
exactly what the manual says.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Which means that callers need not copy data into local tmps.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In preparation for more efficient setting of these fields.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.
The field may not be called "env" due to it being poisoned.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Adapt ppc_cpu_realize() signature, hook it up to DeviceClass and set
realized = true in cpu_ppc_init().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUs are never added to the composition tree, so delete is achieved
simply by removing the last references to them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since HWADDR_PRIx is always the same now, use %016 for TARGET_PPC64 and
%08 for common code. This may slightly change the ppc64 debug output.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In r5949 / 76db3ba44e (target-ppc: memory
load/store rework) variable little_endian was replaced with ctx.le_mode.
Update the debug code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The bit that makes a dcbz instruction a dcbzl instruction was declared as
reserved in ppc32 ISAs. However, hardware simply ignores the bit, making
code valid if it simply invokes dcbzl instead of dcbz even on 750 and G4.
Thus, mark the bit as unreserved so that we properly emulate a simple dcbz
in case we're running on non-G5s.
While at it, also refactor the code to check the 970 special case during
runtime. This way we don't need to differenciate between a 970 dcbz and
any other dcbz anymore. We also allow for future improvements to add e500mc
dcbz handling.
Reported-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce CPUClass::class_by_name and add a default implementation.
Hook up the alpha and ppc implementations.
Introduce a wrapper function cpu_class_by_name().
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will allow each architecture to define how the VCPU ID is set on
the KVM_CREATE_VCPU ioctl call.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently the target-ppc tcg code only supports a single thread. You can
specify more, but they're treated identically to multiple cores. On KVM
we obviously can't support more threads than the hardware; if more are
specified it will cause strange and cryptic errors.
This patch clarifies the situation by giving a simple meaningful error if
more threads are specified than we can support.
Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Even though our -cpu types for e500mc and e5500 are no real CPUs that
actually have version registers, a guest might still want to access
said version register and that has to succeed for a guest to be happy.
So let's expose a zero SVR value on E500_SVR SPR reads.
Signed-off-by: Alexander Graf <agraf@suse.de>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Previously we silently exited, with subclasses we got an opcode warning.
Instead, explicitly tell the user what's wrong.
An indication for this is -cpu ? showing "host" with an all-zero PVR.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since the model list is highly macrofied, keep ppc_def_t for now and
save a pointer to it in PowerPCCPUClass. This results in a flat list of
subclasses including aliases, to be refined later.
Move cpu_ppc_init() to translate_init.c and drop helper.c.
Long-term the idea is to turn translate_init.c into a standalone cpu.c.
Inline cpu_ppc_usable() into type registration.
Split cpu_ppc_register() in two by code movement into the initfn and
by turning the remaining part into a realizefn.
Move qemu_init_vcpu() call into the new realizefn and adapt
create_ppc_opcodes() to return an Error.
Change ppc_find_by_pvr() -> ppc_cpu_class_by_pvr().
Change ppc_find_by_name() -> ppc_cpu_class_by_name().
Turn -cpu host into its own subclass. This requires to move the
kvm_enabled() check in ppc_cpu_class_by_name() to avoid the class being
found via the normal name lookup in the !kvm_enabled() case.
Turn kvmppc_host_cpu_def() into the class_init and add an initfn that
asserts KVM is in fact enabled.
Implement -cpu ? and the QMP equivalent in terms of subclasses.
This newly exposes -cpu host to the user, ordered last for -cpu ?.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
We already used to support the external proxy facility of FSL MPICs,
but only implemented it halfway correctly.
This patch adds support for
* dynamic enablement of the EPR facility
* interrupt acknowledgement only when the interrupt is delivered
This way the implementation now is closer to real hardware.
Signed-off-by: Alexander Graf <agraf@suse.de>
On e500mc, the platform doesn't provide a way for the CPU to go idle.
To still not uselessly burn CPU time, expose an idle hypercall to the guest
if kvm supports it.
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: adjust for current code base, add patch description, fix non-kvm case]
Signed-off-by: Alexander Graf <agraf@suse.de>
Book E does not play games with certain bits of xSRR1 being MSR save
bits and others being error status. xSRR1 is the old MSR, period.
This was causing things like MSR[CE] to be lost, even in the saved
version, as soon as you take an exception.
rfci/rfdi/rfmci are fixed to pass the actual xSRR1 register contents,
rather than the register number.
Put FIXME comments on the hack that is "asrr0/1". The whole point of
separate exception levels is so that you can, for example, take a machine
check or debug interrupt without corrupting critical-level operations.
The right xSRR0/1 set needs to be chosen based on CPU type flags.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The hwaddr type is somewhat vaguely defined as being able to contain bus
addresses on the widest possible bus in the system. For that reason it's
discouraged for representing specific pieces of persistent hardware state,
which should instead use an explicit width type that matches the bits
available in real hardware. In particular, because of the possibility that
the size of hwaddr might change if different buses are added to the target
in future, it's not suitable for use in vm state descriptions for savevm
and migration.
This patch purges such unwise uses of hwaddr from the ppc target code,
which turns out to be just one. The ppcemb_tlb_t struct, used on a number
of embedded ppc models to represent a TLB entry contains a hwaddr for the
real address field. This patch changes it to be a fixed uint64_t which is
suitable enough for all machine types which use this structure.
Other uses of hwaddr in CPUPPCState turn out not to be problematic:
htab_base and htab_mask are just used for the convenience of the TCG code;
the underlying machine state is the SDR1 register, which is stored with
a suitable type already. Likewise the mpic_cpu_base field is only used
internally and does not represent fundamental hardware state which needs to
be saved.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch fixes bug 1031698 :
https://bugs.launchpad.net/qemu/+bug/1031698
If we look at the (truncated) translation of the conditional branch
instruction in the test submitted in the bug post, the call to the
exception helper is missing in the "bne-false" chunk of translated
code :
IN:
bne- 0x1800278
OUT:
0xb544236d: jne 0xb5442396
0xb5442373: mov %ebp,(%esp)
0xb5442376: mov $0x44,%ebx
0xb544237b: mov %ebx,0x4(%esp)
0xb544237f: mov $0x1800278,%ebx
0xb5442384: mov %ebx,0x25c(%ebp)
0xb544238a: call 0x827475a
^^^^^^^^^^^^^^^^^^
0xb5442396: mov %ebp,(%esp)
0xb5442399: mov $0x44,%ebx
0xb544239e: mov %ebx,0x4(%esp)
0xb54423a2: mov $0x1800270,%ebx
0xb54423a7: mov %ebx,0x25c(%ebp)
Indeed, gen_exception(ctx, excp) called by gen_goto_tb (called by
gen_bcond) changes ctx->exception's value to excp's :
gen_bcond()
{
gen_goto_tb(ctx, 0, ctx->nip + li - 4);
/* ctx->exception value is POWERPC_EXCP_BRANCH */
gen_goto_tb(ctx, 1, ctx->nip);
/* ctx->exception now value is POWERPC_EXCP_TRACE */
}
Making the following gen_goto_tb()'s test false during the second call :
if ((ctx->singlestep_enabled &
(CPU_BRANCH_STEP | CPU_SINGLE_STEP)) &&
ctx->exception == POWERPC_EXCP_BRANCH /* false...*/) {
target_ulong tmp = ctx->nip;
ctx->nip = dest;
/* ... and this is the missing call */
gen_exception(ctx, POWERPC_EXCP_TRACE);
ctx->nip = tmp;
}
So the patch simply adds the missing matching case, fixing our problem.
Signed-off-by: Julio Guerra <guerr@julio.in>
Signed-off-by: Alexander Graf <agraf@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
* 'trivial-patches' of git://github.com/stefanha/qemu:
pc: Drop redundant test for ROM memory region
exec: make some functions static
target-ppc: make some functions static
ppc: add missing static
vnc: add missing static
vl.c: add missing static
target-sparc: make do_unaligned_access static
m68k: Return semihosting errno values correctly
cadence_uart: More debug information
Conflicts:
target-m68k/m68k-semi.c
This patch adds some extra FPU state to CPUPPCState. Specifically,
fpscr is extended to a target_ulong bits, since some recent (64 bit)
CPUs now have more status bits than fit inside 32 bits. Also, we add
the 32 VSR registers present on CPUs with VSX (these extend the
standard FP regs, which together with the Altivec/VMX registers form a
64 x 128bit register file for VSX).
We don't actually support the instructions using these extra registers
in TCG yet, but we still need a place to store the state so we can
sync it with KVM and savevm/loadvm it. This patch updates the savevm
code to not fail on the extended state, but also does not actually
save it - that's a project for another patch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We change the storage of the VPA information to explicitly use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Adapt emulate_spapr_hypercall() accordingly.
Needed for changing spapr_hypercall() argument type to PowerPCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (22 commits)
PPC: pseries: Remove hack for PIO window
PPC: e500: Map PIO space into core memory region
xen_platform: convert PIO to new memory api read/write
vmport: convert PIO to new memory api read/write
serial: convert PIO to new memory api read/write
rtl8139: convert PIO to new memory api read/write
pckbd: convert PIO to new memory api read/write
pc port92: convert PIO to new memory api read/write
mc146818rtc: convert PIO to new memory api read/write
m48t59: convert PIO to new memory api read/write
i8254: convert PIO to new memory api read/write
es1370: convert PIO to new memory api read/write
virtio-pci: convert PIO to new memory api read/write
ac97: convert PIO to new memory api read/write
pseries: Implement qemu initiated shutdowns using EPOW events
target-ppc: Rework storage of VPA registration state
pseries: Don't allow duplicate registration of hcalls or RTAS calls
Add USB option in machine options
e500: Fix serial initialization
PPC: 440: Emulate DCBR0
...
With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor. Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.
The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time. This size
can later be overwritten with other information, however, so we need to
save the size as of registration time. We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.
In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The DCBR0 register on 440 is used to implement system reset. The same
register is used on 405 as well, so just reuse the code.
Signed-off-by: Alexander Graf <agraf@suse.de>
For all our PPC targets the physical address space is at least
36 bits, so drop an unnecessary preprocessor conditional check
on TARGET_PHYS_ADDR_SPACE_BITS (erroneously introduced as part
of the change from target_phys_addr_t to hwaddr). This brings
this bit of code into line with the way we handle the other
cases which were originally checking TARGET_PHYS_ADDR_BITS in
order to avoid compiler complaints about overflowing a 32 bit type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (35 commits)
PPC: KVM: Fix BAT put
PPC: e500: Only expose even TLB sizes in initial TLB
ppc/pseries: Reset VPA registration on CPU reset
pseries: Don't test for MSR_PR for hypercalls under KVM
PPC: e500: calculate initrd_base like dt_base
PPC: e500: increase DTC_LOAD_PAD
device tree: simplify dumpdtb code
fdt: move dumpdtb interpretation code to device_tree.c
target-ppc: Remove unused power_mode field from cpu state
pseries: Set hash table size based on RAM size
pseries: Remove unnecessary locking from PAPR hash table hcalls
ppc405_uc: Fix buffer overflow
target-ppc: KVM: Fix some kernel version edge cases for kvmppc_reset_htab()
pseries: Fix semantics of RTAS int-on, int-off and set-xive functions
pseries: Rework implementation of TCE bypass
pseries: Remove never used flags field from spapr vio devices
pseries: Remove XICS irq type enum type
pseries: Remove C bitfields from xics code
pseries: Small cleanup to H_CEDE implementation
pseries: Fix XICS reset
...
A terminal NUL is required by caller's use of strchr.
It's better not to use strncpy at all, since there is no need
to zero out hundreds of trailing bytes for each iteration.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the sregs API, upper and lower 32bit segments of the BAT registers
are swapped when doing a set. Since we need to support old kernels out
there, don't bother to fix it in the kernel, but instead work around
the problem in QEMU by swapping on put.
Signed-off-by: Alexander Graf <agraf@suse.de>
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ppc specific CPU state contains several variables which track the
VPA, SLB shadow and dispatch trace log. These are structures shared
between OS and hypervisor that are used on the pseries machine to track
various per-CPU quantities.
The address of these structures needs to be registered by the guest on each
boot, however currently this registration is not cleared when we reset the
cpu. This patch corrects this bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
CPUPPCState includes a variable 'power_mode' which is used nowhere. This
patch removes it. This includes saving a dummy zero in its place during
vmsave, to avoid breaking the save format.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The kvmppc_reset_htab() function invokes the KVM_PPC_ALLOCATE_HTAB vm ioctl
to request KVM to allocate and reset a hash page table for the guest - it
returns the size of hash table allocated, or 0 to indicate that qemu needs
to allocate the hash table itself. In practice qemu needs to allocate the
htab for full emulation and with Book3sPR KVM, but the kernel has to
allocate it for Book3sHV KVM (the hash table needs to be physically
contiguous in that case).
Unfortunately, the logic in this function is incorrect for some existing
kernels. Specifically:
* at least some PR KVM versions advertise the relevant capability but
don't actually implement the ioctl(), returning ENOTTY.
* For old kernels which don't have the capability, we currently return 0.
This is correct for PV KVM, where we need to allocate the htab, but not for
HV KVM - kernels of this era always allocate a 16MB hash table per guest.
This patch corrects both of these edge cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds support for then new "reset htab" ioctl which allows qemu
to properly cleanup the MMU hash table when the guest is reset. With
the corresponding kernel support, reset of a guest now works properly.
This also paves the way for indicating a different size hash table
to the kernel and for the kernel to be able to impose limits on
the requested size.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
At least when invoked with high enough 'level' arguments,
kvm_arch_put_registers() is supposed to copy essentially all the cpu state
as encoded in qemu's internal structures into the kvm state. Currently
the ppc version does not do this - it never calls KVM_SET_SREGS, for
example, and therefore never sets the SDR1 and various other important
though rarely changed registers.
Instead, the code paths which need to set these registers need to
explicitly make (conditional) kvm calls which transfer the changes to kvm.
This breaks the usual model of handling state updates in qemu, where code
just changes the internal model and has it flushed out to kvm automatically
at some later point.
This patch fixes this for Book S ppc CPUs by adding a suitable call to
KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register
that is set with that call so far). This lets us remove the hacks to
explicitly set these registers from the kvmppc_set_papr() function.
The problem still exists for Book E CPUs (which use a different version of
the kvm_sregs structure). But fixing that has some complications of its
own so can be left to another day.
Lkewise, there is still some ugly code for setting the PVR through special
calls to SET_SREGS which is left in for now. The PVR needs to be set
especially early because it can affect what other features are available
on the CPU, so I need to do more thinking to see if it can be integrated
into the normal paths or not.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We can finally get rid of the ugly HANDLE_NAN{1,2,3} macros.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use the new softfloat float32_muladd() function to implement the vmaddfp
and vnmsubfp instructions. As a bonus we can get rid of the call to the
HANDLE_NAN3 macro, as the NaN handling is directly done at the softfloat
level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use the new softfloat float32_min() and float32_max() to implement the
vminfp and vmaxfp instructions. As a bonus we can get rid of the call to
the HANDLE_NAN2 macro, as the NaN handling is directly done at the
softfloat level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit e024e881bb provided a pickNaN()
function for PowerPC, implementing the correct NaN propagation rules.
Therefore there is no need to test the operands manually, we can rely
on the softfloat code to do that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Altivec instructions are not working anymore in PowerPC emulation,
following commit d15f74fb, which inverted two registers in the call
to helper. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* agraf/ppc-for-upstream: (24 commits)
openpic: Added BRR1 register
pseries: Update SLOF firmware image
pseries dma: DMA window params added to PHB and DT population changed
pseries: Add PCI MSI/MSI-X support
pseries: Add trace event for PCI irqs
pseries: Export find_phb() utility function for PCI code
pseries: added allocator for a block of IRQs
pseries: Separate PCI RTAS setup from common from emulation specific PCI setup
pseries: Rework irq assignment to avoid carrying qemu_irqs around
pseries: Remove extraneous prints
pseries: Update SLOF
PPC: spapr: Remove global variable
PPC: spapr: Rework VGA select logic
xbzrle: fix compilation on ppc32
spapr: Add support for -vga option
Add one new file vga-pci.h and cleanup on all platforms
Revert "PPC: e500: Use new MPIC dt format"
ppc: Fix bug in handling of PAPR hypercall exits
PPC: e500: add generic e500 platform
PPC: e500: split mpc8544ds machine from generic e500 code
...
mingw32 seems to want the declaration to also carry the weak attribute.
Strangely, gcc on Linux absolutely does not want the declaration to be marked
as weak. This may not be the right fix, but it seems to do the trick.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently for powerpc, kvm_arch_handle_exit() always returns 1, meaning
that its caller - kvm_cpu_exec() - will always exit immediately afterwards
to the loop in qemu_kvm_cpu_thread_fn().
There's no need to do this. Once we've handled the hypercall there's no
reason we can't go straight around and KVM_RUN again, which is what ret = 0
will signal. The only exception might be for hypercalls which affect the
state of cpu_can_run(), however the only one that might do this is H_CEDE
and for kvm that is always handled in the kernel, not qemu.
Furtherm setting ret = 0 means that when exit_requested is set from a
hypercall, we will enter KVM_RUN once more with a signal which lets the
the kernel do its internal logic to complete the hypercall with out
actually executing any more guest code. This is important if our hypercall
also triggered a reset, which previously would re-initialize everything
without completing the hypercall. This caused the kernel to get confused
because it thought the guest was still in the middle of a hypercall when
it has actually been reset.
This patch therefore changes to ret = 0, which is both a bugfix and a small
optimization.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices. This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.
This patch converts this code to make use of the new common IOMMU
infrastructure.
We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.
Cc: Alex Graf <agraf@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a compiler error when QEMU was configured with --enable-debug.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On 64bit capable systems, MAS2 can actually hold a 64bit virtual page
address. So increase the mask for its EPN.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MAS registers on BookE are all 32 bit wide, except for MAS2, which
can hold up to 64 bit on 64 bit capable CPUs. Reflect this in the SPR
setting code, so that the guest can never write invalid values in them.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch moves the debug #ifdef'ed SPR trace generation into its
own function, so we can call it from multiple places.
Signed-off-by: Alexander Graf <agraf@suse.de>
IVPR can either hold 32 or 64 bit addresses, depending on the CPU type. Let
the CPU initialization function pass in its mask itself, so we can easily
extend it.
Signed-off-by: Alexander Graf <agraf@suse.de>
On the e500 series, accessing SPR_EPR magically turns into an access at
that CPU's IACK register on the MPIC. Implement that logic to get kernels
that make use of that feature work.
Signed-off-by: Alexander Graf <agraf@suse.de>
The BookE variant of MSR_SF is MSR_CM. Implement everything it takes in TCG to
support running 64bit code with MSR_CM set.
Signed-off-by: Alexander Graf <agraf@suse.de>
The number of SPRs avaiable in different PowerPC chip is still increasing. Add
definitions for the MAS7_MAS3 SPR and all currently known bits in EPCR.
Signed-off-by: Alexander Graf <agraf@suse.de>
More recent Power server chips (i.e. based on the 64 bit hash MMU)
support more than just the traditional 4k and 16M page sizes. This
can get quite complicated, because which page sizes are supported,
which combinations are supported within an MMU segment and how these
page sizes are encoded both in the SLB entry and the hash PTE can vary
depending on the CPU model (they are not specified by the
architecture). In addition the firmware or hypervisor may not permit
use of certain page sizes, for various reasons. Whether various page
sizes are supported on KVM, for example, depends on whether the PR or
HV variant of KVM is in use, and on the page size of the memory
backing the guest's RAM.
This patch adds information to the CPUState and cpu defs to describe
the supported page sizes and encodings. Since TCG does not yet
support any extended page sizes, we just set this to NULL in the
static CPU definitions, expanding this to the default 4k and 16M page
sizes when we initialize the cpu state. When using KVM, however, we
instead determine available page sizes using the new
KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use
some defaults, with some guesswork which should do the right thing for
existing HV and PR implementations. The fallback might not be correct
for future versions, but that's ok, because they'll have
KVM_PPC_GET_SMMU_INFO.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The size of EPN field in MAS2 depends on page size. This patch adds a
mask to discard invalid bits in EPN field.
Definition of EPN field from e500v2 RM:
EPN Effective page number: Depending on page size, only the bits
associated with a page boundary are valid. Bits that represent offsets
within a page are ignored and should be cleared.
There is a similar (but more complicated) definition in PowerISA V2.06.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Lookup table 'hbrev' is never written to, so add a 'const' qualifier.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move more misc helpers from helper.c to misc_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move misc helpers from op_helper.c to misc_helpers.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move decrementer and timebase helpers to a dedicated file.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove useless wrappers. In some cases 'int' parameters are
changed to uint32_t.
Make internal functions static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix kvm compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move more MMU helpers from helper.c to mmu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[update to current helper.c state]
Signed-off-by: Alexander Graf <agraf@suse.de>
When the code is moved together by the next patch, compiler
detects a possible uninitialized variable use. Avoid the warning
by initializing the variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move MMU, TLB, SLB and BAT ops to mmu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[fix unwanted whitespace line in Makefile.target]
Signed-off-by: Alexander Graf <agraf@suse.de>
Move integer and vector ops to int_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move FPU and SPE helpers from op_helper.c to fpu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move exception helpers from helper.c to excp_helper.c and
make cpu_dump_rfi() static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
helper.c will be spilt by the next patches, fix
style issues before that.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move exception helpers from op_helper.c to excp_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
op_helper.c will be split by the next patches, fix
style issues before that.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The file is located in target-ppc/, not hw/.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In commit 1bba0dc932 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Adapt e500 mpc8544ds machine accordingly.
Turn cpu_init() into a static inline function returning CPUPPCState for
backwards compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
When initializing the e500 code, we need to expose its
cache line size for user and system mode, while the mmu
details are only interesting for system emulation.
Split the 2 switch statements apart, allowing us to #ifdef
out the mmu parts for user mode emulation while keeping all
cache information consistent.
Signed-off-by: Alexander Graf <agraf@suse.de>
machine.c is only compiled for softmmu targets, so checks for
!defined(CONFIG_USER_ONLY) are unnecessary and can be dropped.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[AF: Use more verbose commit message suggested by PMM]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
commit f7aa558396 pulled the dcache and icache
line size initialization inside of a '#if !defined(CONFIG_USER_ONLY)' block.
This is not correct because instructions like 'dcbz' need the dcache size
initialized even for user mode.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
[AF: Simplify #ifdefs by using cache line size 32 for *-user as before]
Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move code from cpu_state_reset() into ppc_cpu_reset().
Reorder #include of helper_regs.h to use it in translate_init.c.
Adjust whitespace and add braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Move code not dependent on ppc_def_t from cpu_ppc_init() into an initfn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Embed CPUPPCState as first member of PowerPCCPU.
Distinguish between "powerpc-cpu", "powerpc64-cpu" and
"embedded-powerpc-cpu".
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
On target-ppc, our table of CPU types and features encodes the features as
found on the hardware, regardless of whether these features are actually
usable under TCG or KVM. We already have cases where the information from
the cpu table must be fixed up to account for limitations in the emulation
method we're using. e.g. TCG does not support the DFP and VSX instructions
and KVM needs different numbering of the CPUs in order to tell it the
correct thread to core mappings.
This patch cleans up these hacks to handle emulation limitations by
consolidating them into a pair of functions specifically for the purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[AF: Style and typo fixes, rename new functions and drop ppc_def_t arg]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 41557447d3 also introduced a subtle TLB
flush bug. By applying a mask to the interrupt MSR which cleared the IR/DR
bits at the start of the interrupt handler, the logic towards the end of the
handler to force a TLB flush if either one of these bits were set would never
be triggered.
This patch simply changes the IR/DR bit check in the TLB flush logic to use
the original MSR value (albeit with some interrupt-specific bits cleared) so
that the IR/DR bits are preserved at the point where the check takes place.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The official spelling is QEMU.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[blauwirbel@gmail.com: fixed comment style in hw/sun4m.c]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When we dump the CPU registers, there's a certain chance they haven't been
synchronized with KVM yet, so we have to manually trigger that.
This aligns the code with x86 and fixes a bug where the register state was
bogus on invalid/unknown kvm exit reasons.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
'POWERPC_INSNS2_DEFAULT' was defined incorrectly which was causing the
opcode table creation code to erroneously register 'eieio' and 'mbar'
for the "default" processor:
** ERROR: opcode 1a already assigned in opcode table 16
*** ERROR: unable to insert opcode [1f-16-1a]
*** ERROR initializing PowerPC instruction 0x1f 0x16 0x1a
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix large page support in TCG. The old code would overwrite the large page
table entry with the fake 4 KB one generated here whenever the ref/change bits
were updated, causing it to point to the wrong area of memory.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Acked-by: David Gibson <david@gibson.drobpear.id.au>
[agraf: fix whitespace, braces]
Signed-off-by: Alexander Graf <agraf@suse.de>
The POWER7 emulation is missing the Processor Identification Register,
mandatory in recent POWER CPUs, that is required for SMP on at least
some operating systems (e.g. FreeBSD) to function properly. This patch
copies the existing PIR code from the other CPUs that implement it.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
These instructions for loading and storing byte-swapped 64-bit values have
been introduced in PowerISA 2.06.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
For the pseries machine, TCE (IOMMU) tables can either be directly
malloc()ed in qemu or, when running on a KVM which supports it, mmap()ed
from a KVM ioctl. The latter option is used when available, because it
allows the (frequent bottlenext) H_PUT_TCE hypercall to be KVM accelerated.
However, even when KVM is persent, TCE acceleration is not always possible.
Only KVM HV supports this ioctl(), not KVM PR, or the kernel could run out
of contiguous memory to allocate the new table. In this case we need to
fall back on the malloc()ed table.
When a device is removed, and we need to remove the TCE table, we need to
either munmap() or free() the table as appropriate for how it was
allocated. The code is supposed to do that, but we buggily fail to
initialize the tcet->fd variable in the malloc() case, which is used as a
flag to determine which is the right choice.
This patch fixes the bug, and cleans up error messages relating to this
path while we're at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc]
sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
On ppc405ep there is a register that allows for software to reset the
core, but not the whole system. Implement this reset using a reset
interrupt.
This gets rid of a bunch of #if 0'ed code.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Fix this error:
/src/qemu/target-ppc/helper.c: In function 'booke206_tlb_to_page_size':
/src/qemu/target-ppc/helper.c:1296:14: error: variable 'tlbncfg' set but not used [-Werror=unused-but-set-variable]
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When running Linux on e500 with powersave-nap enabled, Linux tries to
read out the L1CFG0 register and calculates some things from it. Passing
0 there ends up in a division by 0, resulting in -1, resulting in badness.
So let's populate the L1CFG0 register with reasonable defaults. That way
guests aren't completely confused.
Reported-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The e500mc implements Embedded.Processor Control, so enable it and
thus enable guests to IPI each other. This makes -smp work with -cpu
e500mc.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the msgsnd instruction. It is part of the
Embedded.Processor Control specification and allows one CPU to
IPI another CPU without going through an interrupt controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the msgclr instruction. It is part of the
Embedded.Processor Control specification and clears pending doorbell
interrupts on the current CPU.
Signed-off-by: Alexander Graf <agraf@suse.de>
We already had all the code available to have doorbell exceptions
be handled properly. It was just disabled.
Enable it, so we can rely on it.
Signed-off-by: Alexander Graf <agraf@suse.de>
We're going to introduce doorbell instructions (called processor
control in the spec) soon. Add some defines for easier patch
readability later.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our EXCP list is getting outdated. By now, 3 new exception vectors have
been introduced. Update the list so we have everything at one place.
Signed-off-by: Alexander Graf <agraf@suse.de>
We can have TLBs that only support a single page size. This is defined
by the absence of the AVAIL flag in TLBnCFG. If this is the case, we
currently write invalid size info into the TLB, but override it on
internal fault.
Let's move the check over to tlbwe, so we don't have the AVAIL check in
the hotter fault path.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our internal helpers to fetch TLB entries were not able to tell us
that an entry doesn't even exist. Pass an error out if we hit such
a case to not accidently pass beyond the TLB array.
Signed-off-by: Alexander Graf <agraf@suse.de>
The PowerPC 2.06 BookE ISA defines an opcode called "tlbilx" which is used
to flush TLB entries. It's the recommended way of flushing in virtualized
environments.
So far we got away without implementing it, but Linux for e500mc uses this
instruction, so we better add it :).
Signed-off-by: Alexander Graf <agraf@suse.de>
When setting a TLB entry, we need to check if the TLB we're putting it in
actually supports the given size. According to the 2.06 PowerPC ISA, a
value that's out of range can either be redefined to something implementation
dependent or we can raise an illegal opcode exception. We do the latter.
Signed-off-by: Alexander Graf <agraf@suse.de>
When using MAV 2.0 TLB registers, we have another range of TLB registers
available to read the supported page sizes from.
Add SPR definitions for those and add a helper function that we can use
to receive such a bitmap even when using MAV 1.0.
Signed-off-by: Alexander Graf <agraf@suse.de>
We might want to call the tlb check function without actually caring about
the real address resolution. Check if we really should write the value
back.
Signed-off-by: Alexander Graf <agraf@suse.de>
The msync instruction as defined today is only valid on 4xx cores, not
on e500 which also supports msync, but treats it the same way as sync.
Rename it to reflect that it's 4xx only.
Signed-off-by: Alexander Graf <agraf@suse.de>
The e500 CPUs don't use 440's msync which falls on the same opcode IDs,
but instead use the real powerpc sync instruction. This is important,
since the invalid mask differs between the two.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our code only knows IVORs up to 37. Add the new ones defined in ISA 2.06
from 38 - 42.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Unfortunately the HIOR setting code slipped into upstream QEMU
before it was pulled into upstream KVM. And since Murphy is always
right, comments on the patches only emerged on the pull request
leading to changes in the interface.
So here's an update to the HIOR setting. While at it, I also relaxed
it a bit since for HV KVM we can already run fine without and 3.2
works just fine with HV KVM but when not setting HIOR. We will only
need this when running PAPR in PR KVM.
Since we accidently changed the ABI and API along the way, we have
to update the underlying kernel headers together with the code that
uses it to not break bisectability.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have 440 TLB emulation, we can also support running the 440EP
CPU target in system emulation mode.
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit c5705a772 ("vmstate, memory: decouple vmstate from memory API") changed
the signature of memory_region_init_ram_ptr() but did not update a caller in
the ppc kvm module. Fix.
Signed-off-by: Avi Kivity <avi@redhat.com>
This core is found on chips such as p4080, p3041, p2040, and p5020.
More needs to be done to make this viable for TCG (such as missing SPRs
and instructions), but this suffices to get KVM running with appropriate
kernel support.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
[scottwood@freescale.com: tweak some flags]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When guest reset, we need to halt secondary cpus until guest kick them.
This already works for tcg. The patch add the support for kvm.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: remove in-kernel irqchip code]
When run with a PPC Book3S (server) CPU Currently 'info tlb' in the
qemu monitor reports "dump_mmu: unimplemented". However, during
bringup work, it can be quite handy to have the SLB entries, which are
available in the CPUPPCState. This patch adds an implementation of
info tlb for book3s, which dumps the SLB.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When using gdb to single step a ppc interrupt routine, the execution
flow passes the rfi instruction without actually returning from the
interrupt.
The patch fixes this by avoiding to update the nip when the debug
exception is raised and a previous POWERPC_EXCP_SYNC was set.
The latter is the case only, if code for rfi or a related instruction
was generated.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: Alexander Graf <agraf@suse.de>
The CPU state contains two bitmaps, initialized from the CPU spec
which describes which instructions are implemented on the CPU. A
couple of bits are defined which cover instructions (VSX and DFP)
which are not currently implemented in TCG. So far, these are only
used to handle the case of -cpu host because a KVM guest can use
the instructions when the host CPU supports them.
However, it's a mild layering violation to simply not include those
bits in the CPU descriptions for those CPUs that do support them,
just because we can't handle them in TCG. This patch corrects the
situation, so that the instruction bits _are_ shown correctly in the
cpu spec table, but are masked out from the cpu state in the non-KVM
case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Sufficiently recent kernels include a KVM call to accelerate use of
PAPR TCE tables (IOMMU), which are used by PAPR virtual IO devices.
This involves qemu mapping the TCE table in from a kernel obtained fd,
which currently we do with PROT_READ only. This is a hangover from
early (never released) versions of this kernel interface which only
permitted read-only mappings and required us to destroy and recreate
the table when we needed to clear it from qemu.
Now, the kernel permits read-write mappings, and we rely on this to
clear the table in spapr_vio_quiesce_one(). However, due to
insufficient testing, I forgot to update the actual mapping of the
table in kvmppc_create_spapr_tce() to add PROT_WRITE to the mmap().
This patch corrects the oversight.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The -cpu host feature tries to find out the host capabilities based
on device tree information. However, we don't always have that available
because it's an optional property in dt.
So instead of force unsetting values depending on an unreliable source
of information, let's just try to be clever about it and not override
capabilities when we don't know the device tree pieces.
This fixes altivec with -cpu host on YDL PowerStations.
Reported-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The recent usage of MemoryRegion in kvm_ppc.h breaks builds with
CONFIG_USER_ONLY=y. This patch fixes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, when KVM is enabled, the pseries machine checks if the host
CPU supports VMX, VSX and/or DFP instructions and advertises
accordingly in the guest device tree. It does this regardless of what
CPU is selected on the command line. On the other hand, when in TCG
mode, it never advertises any of these facilities, even basic VMX
(Altivec) which is supported in TCG.
Now that we have a -cpu host option for ppc, it is fairly
straightforward to fix both problems. This patch changes the -cpu
host code to override the basic cpu spec derived from the PVR with
information queried from the host avout VMX, VSX and DFP capability.
The pseries code then uses the instruction availability advertised in
the cpu state to set the guest device tree correctly for both the KVM
and TCG cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The sole reason we have the ppcemb target is to support MMUs that have
less than the usual 4k possible page size. There are very few of these
chips and I don't want to add additional QA and testing burden to everyone
to ensure that code still works when TARGET_PAGE_SIZE is not 4k.
So this patch disables all CPUs except for MMU_BOOKE capable ones from
the ppcemb target.
Signed-off-by: Alexander Graf <agraf@suse.de>
Some 32-bit PPC CPUs can use up to 36 bit of physical address space.
Treat them accordingly in the qemu-system-ppc binary type.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds cpu specs to the table for POWER7 revisions 2.1 and 2.3.
This allows -cpu host to be used on these host cpus.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
For convenience with kvm, x86 allows the user to specify -cpu host on the
qemu command line, which means make the guest cpu the same as the host
cpu. This patch implements the same option for ppc targets.
For now, this just read the host PVR (Processor Version Register) and
selects one of our existing CPU specs based on it. This means that the
option will not work if the host cpu is not supported by TCG, even if that
wouldn't matter for use under kvm.
In future, we can extend this in future to override parts of the cpu spec
based on information obtained from the host (via /proc/cpuinfo, the host
device tree, or explicit KVM calls). That will let us handle cases where
the real kvm-virtualized CPU doesn't behave exactly like the TCG-emulated
CPU. With appropriate annotation of the CPU specs we'll also then be able
to use host cpus under kvm even when there isn't a matching full TCG model.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The ppc target contains a ppc_find_by_pvr() function, which looks up a
CPU spec based on a PVR (that is, based on the value in the target cpu's
Processor Version Register). PVR values contain information on both the
cpu model (upper 16 bits, usually) and on the precise revision (low 16
bits, usually).
ppc_find_by_pvr, as well as making exact PVR matches, attempts to find
"close" PVR matches, when we don't have a CPU spec for the exact revision
specified. This sounds like a good idea, execpt that the current logic
is completely nonsensical.
It seems to assume CPU families are subdivided bit by bit in the PVR in a
way they just aren't. Specifically, it requires a match on all bits of the
specified pvr up to the last non-zero bit. This has the bizarre effect
that when the low bits are simply a sequential revision number (a common
though not universal pattern), then odd specified revisions must be matched
exactly, whereas even specified revisions will also match the next odd
revision, likewise for powers of 4, 8 and so forth.
To correctly do inexact matching we'd need to re-organize the table of CPU
specs to include a mask showing what PVR range the spec is compatible with
(similar to the cputable code in the Linux kernel).
For now, just remove the bogosity by only permitting exact PVR matches.
That at least makes the matching simple and consistent. If we need inexact
matching we can add the necessary per-subfamily masks later.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Sufficiently recent PAPR specifications define properties "ibm,vmx"
and "ibm,dfp" on the CPU node which advertise whether the VMX vector
extensions (or the later VSX version) and/or the Decimal Floating
Point operations from IBM's recent POWER CPUs are available.
Currently we do not put these in the guest device tree and the guest
kernel will consequently assume they are not available. This is good,
because they are not supported under TCG. VMX is similar enough to
Altivec that it might be trivial to support, but VSX and DFP would
both require significant work to support in TCG.
However, when running under kvm on a host which supports these
instructions, there's no reason not to let the guest use them. This
patch, therefore, checks for the relevant support on the host CPU
and, if present, advertises them to the guest as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the kvmppc_get_clockfreq() function reads the host's clock
frequency from /proc/device-tree, which is useful to past to the guest
in KVM setups. However, there are some other host properties
advertised in the device tree which can also be relevant to the
guests.
This patch, therefore, replaces kvmppc_get_clockfreq() which can
retrieve any named, single integer property from the host device
tree's CPU node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
SPE instructions are defined by pairs. Currently, the invalid-bits mask is set
for the first instruction, but the second one can have a different mask.
example:
GEN_SPE(efdcmpeq, efdcfs, 0x17, 0x0B, 0x00600000, 0x00180000, PPC_SPE_DOUBLE),
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries machine of qemu implements the TCE mechanism used as a
virtual IOMMU for the PAPR defined virtual IO devices. Because the
PAPR spec only defines a small DMA address space, the guest VIO
drivers need to update TCE mappings very frequently - the virtual
network device is particularly bad. This means many slow exits to
qemu to emulate the H_PUT_TCE hypercall.
Sufficiently recent kernels allow this to be mitigated by implementing
H_PUT_TCE in the host kernel. To make use of this, however, qemu
needs to initialize the necessary TCE tables, and map them into itself
so that the VIO device implementations can retrieve the mappings when
they access guest memory (which is treated as a virtual DMA
operation).
This patch adds the necessary calls to use the KVM TCE acceleration.
If the kernel does not support acceleration, or there is some other
error creating the accelerated TCE table, then it will still fall back
to full userspace TCE implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
At present, using the hypervisor aware Book3S-HV KVM will only work
with qemu on POWER7 CPUs. PPC970 CPUs also have hypervisor
capability, but they lack the VRMA feature which makes assigning guest
memory easier.
In order to allow KVM Book3S-HV on PPC970, we need to specially
allocate the first chunk of guest memory (the "Real Mode Area" or
RMA), so that it is physically contiguous.
Sufficiently recent host kernels allow such contiguous RMAs to be
allocated, with a kvm capability advertising whether the feature is
available and/or necessary on this hardware. This patch enables qemu
to use this support, thus allowing kvm acceleration of pseries qemu
machines on PPC970 hardware.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
agraf: fix to use memory api
