Here the virtio-ccw-s390 is modified for the new API. The device
virtio-ccw-s390 extends virtio-ccw-device as before. It creates and
connects a virtio-ccw during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-blk-s390 is modified for the new API. The device
virtio-blk-s390 extends virtio-s390-device as before. It creates and
connects a virtio-blk during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-blk-pci is modified for the new API. The device
virtio-blk-pci extends virtio-pci. It creates and connects a virtio-blk
during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-blk which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The configuration field must not be a pointer as it will be used for virtio-blk
properties. So *blk is replaced by blk in VirtIOBlock structure.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hot unplug failed because it tried to free the virtio device two times.
This fix the issue by removing the call to virtio_bus_destroy_device.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1363624648-16906-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This set allow_hotplug for each existing virtio-x-bus, allowing the
refactored devices to be hot pluggable.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1363624648-16906-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These structures must be made public to avoid two memory allocations for
refactored virtio devices.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363624648-16906-2-git-send-email-fred.konrad@greensocs.com
Changes V4 <- V3:
* Rebased on current git.
Changes V3 <- V2:
* Style correction spotted by Andreas (virtio-scsi.h).
* Style correction for virtio-net.h.
Changes V2 <- V1:
* Move the dataplane include into the header (virtio-blk).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that nobody depends on DisplayState in DisplayChangeListener
callbacks any more we can remove the parameter from all callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener
callbacks with a dpy_gfx_switch callback which notifies the ui code
when the framebuffer backing storage changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Decouple DisplaySurface allocation & deallocation from DisplayState.
Replace dpy_gfx_resize + dpy_gfx_setdata with a dpy_gfx_replace_surface
function.
This handles the graphic hardware emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ask the vga core to update the display. Will trigger dpy_gfx_resize
if needed. More complete than just calling dpy_gfx_resize.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DisplayChangeListener is passed now to all DisplayChangeListenerOps
callbacks, so we can use that to access the qxl state and kill the
qxl0 global variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All PCI nics are switched to EFI-enabled roms by default. They are
composed from three images (legacy, efi ia32 & efi x86), so classic
pxe booting will continue to work.
Exception: eepro100 is not switched, it uses a single rom for all
emulated eepro100 variants, then goes patch the rom header on the
fly with the correct PCI IDs. I doubt that will work as-is with
the efi roms.
Keep old roms for 1.4+older machine types via compat properties,
needed because the efi-enabled roms are larger so the pci rom bar
size would change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
libvirt has a long-standing bug: when removing the device,
it can request removal but does not know when the
removal completes. Add an event so we can fix this in a robust way.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added additional commands to the switch to check for when snooping commands in
dual bus mode setups. Cleaned up code to use an enum.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 848c116c711dab0af10729a487968384aadd9faf.1362373359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The R_LQPSI_CFG register has the LQSPI_CFG_SEP_BUS and LQSPI_CFG_TWO_MEM bits.
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d76c8e364c80a42352ae4f0661aff2cd17ad32a4.1362373359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device model for Primecell PL330 DMA controller.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SYS_CFG_OSC function. Since the idea of
programmable clock rates doesn't make much sense for QEMU,
we simply allow the clock rate to be read back as written.
The number and value of the daughterboard oscillators varies
between daughterboards, so we provide an array property to
allow their reset values to be configured.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass voltage sensor properties to the sysctl device. Since
these are daughterboard specific, we specify them via the
VEDBoardInfo structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1359985476-29380-9-git-send-email-peter.maydell@linaro.org
Implement the SYS_CFG_VOLT registers which return the voltage
of various supplies on motherboard and daughterboard. Since
QEMU implements a perfectly stable power supply these registers
always return a constant value. The number and value of the
daughterboard voltages is dependent on the specific daughterboard,
so we use a property array to allow the board to configure them
appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for declaring array properties for qdev devices.
These work by defining an initial static property 'len-arrayname'
which the user of the device should set to the desired size
of the array. When this property is set, memory is allocated
for the array elements, and dynamic properties "arrayname[0]",
"arrayname[1]"... are created so the user of the device can
then set the values of the individual array elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert this device from old-style qdev init to an instance_init
function. We don't need a realize function yet, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_DVIMODE allows the guest to select whether the
output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since
this makes no difference to QEMU, implement writes as a
no-op so Linux doesn't complain.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SYS_CFG_MUXFPGA allows the guest to select whether the
video output should come from the motherboard's LCD
controller or the daughterboard's one. Since QEMU doesn't
currently support selecting the video output like this,
implement as a no-op, so Linux doesn't complain about
the register not being implemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SYS_CFGCTRL register consists of separate fields
for DCC, function, site, position and device, as well
as a read/write bit. Refactor the code handling SYS_CFGCTRL
writes to make it easier to add support for functions
like SYS_CFG_OSC which support multiple device fields.
We also pull the handling out into its own function for
clarity, as there are potentially a lot of implementable
subfunctions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the daughterboard-specific proc_id property to the code that
creates the sysctl device via the VEDBoardInfo struct, rather than
by having the daughterboard init function write to a uint32_t*
argument. This is a cleaner way to pass the info around, and
is in line with the way we are going to handle voltage and
oscillator initialization.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# By Stefan Hajnoczi (14) and others
# Via Stefan Hajnoczi
* stefanha/block: (28 commits)
blockdev: Fix up copyright and permission notice
qemu-iotests: use -nographic in test case 007
qemu-iotests: add tests for rebasing zero clusters
dataplane: fix hang introduced by AioContext transition
coroutine: use AioContext for CoQueue BH
threadpool: drop global thread pool
block: add bdrv_get_aio_context()
aio: add a ThreadPool instance to AioContext
threadpool: add thread_pool_new() and thread_pool_free()
threadpool: move globals into struct ThreadPool
main-loop: add qemu_get_aio_context()
sheepdog: set io_flush handler in do_co_req
sheepdog: use non-blocking fd in coroutine context
qcow2: make is_allocated return true for zero clusters
qcow2: drop unnecessary flush in qcow2_update_snapshot_refcount()
qcow2: drop flush in update_cluster_refcount()
qcow2: flush in qcow2_update_snapshot_refcount()
qcow2: set L2 cache dependency in qcow2_alloc_bytes()
qcow2: flush refcount cache correctly in qcow2_write_snapshots()
qcow2: flush refcount cache correctly in alloc_refcount_block()
...
# By Christian Borntraeger (1) and Cornelia Huck (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wire up virtio-rng.
virtio-ccw: remove qdev_unparent in unplug routing
The bug is that the EventNotifiers do have a NULL io_flush callback.
Because _none_ of the callbacks on the dataplane AioContext have such a
callback, aio_poll will simply do nothing. Fixed by adding the callbacks:
the ioeventfd will always be polled (this can change in the future to
pause/resume the processing during live snapshots or similar operations);
the ioqueue will be polled if there are outstanding requests.
I must admit I have screwed up my testing somehow, because commit
2c20e71 does not work even if cherry-picked on top of 1.4.0, and this
patch fixes it there as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes unplugging a virtio-ccw device. We no
longer need to do that in virtio-ccw since common code does now
proper handling.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
They are never changed once initialized, and moving them to the class
will allow to inspect them before instantiating.
Signed-off-by: Andreas Färber <afaerber@suse.de>
A conflict was resolved the wrong way when merging commit 320ba5f (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* origin/master: (75 commits)
tcg: Don't make exitreq flag a local temporary
Makefile: Add subdir dependency on config-devices-all.mak
make_device_config.sh: Emit dependency file to directory where included
Revert "make_device_config.sh: Fix target path in generated dependency file"
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
...
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
# By Paolo Bonzini (4) and Peter Lieven (2)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi-disk: handle io_canceled uniformly and correctly
scsi-disk: do not complete canceled UNMAP requests
scsi: do not call scsi_read_data/scsi_write_data for a canceled request
iscsi: look for pkg-config file too
iscsi: add iscsi_truncate support
iscsi: retry read, write, flush and unmap on unit attention check conditions
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (66 commits)
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
pseries: Implement h_read hcall
target-ppc: Change "POWER7" CPU alias
target-ppc: Fix remaining microcontroller typos among models
target-ppc: Split model definitions out of translate_init.c
target-ppc: Update Coding Style for CPU models
target-ppc: Turn descriptive CPU model comments into device descriptions
target-ppc: Turn descriptive CPU family comments into device descriptions
target-ppc: Set remaining fields on CPU family classes
target-ppc: Register all types for TARGET_PPCEMB
...
blockdev_mark_auto_del is already called in virtio-blk-exit.
Remove the redundant call.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have to consider the m bit to find the real channel subsystem when
determining the last subchannel.
If we fail to take this into account, removal of a subchannel in
the middle of a big list of devices will stop device detection after
a reboot.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable all virtio-net features for the legacy s390 virtio bus. This also fixes
kernel BUG at /usr/src/packages/BUILD/kernel-default-3.0.58/linux-3.0/drivers/s390/kvm/kvm_virtio.c:121!
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, for the pseries machine the device tree supplied by qemu to SLOF
and from there to the guest does not include a 'compatible property' at the
root level. Usually that works fine, since in this case the compatible
property doesn't really give any information not already found in the
'device_type' or 'model' properties.
However, the lack of 'compatible' confuses the bootloader install in the
SLES11 SP2 and SLES11 SP3 installers. This patch therefore adds a token
'compatible' property to work around that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
In openbios (drivers/ide.c) they are set to
0000000d 00000000 00000002 00000000
0000000e 00000000 00000003 00000000
0000000f 00000000 00000004 00000000
(The last one seems to be not implemented in qemu)
It follows convention of how they are set on real machines,
both ide and dma ones are increased
Real machine one:
http://web.archive.org/web/20090107151044/http://penguinppc.org/historical/dev-trees-html/g4_agp_500_2.html
00000013 00000001 0000000b 00000000
00000014 00000001 0000000c 00000000
00000015 00000001 0000000d 00000000
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current elf loader uses too much memory. For example, I have a
executable with a bss section of 400 MB and I set the ram size to 512
MB. Qemu uses about 780MB of RAM (which is fine), but there's a peak at
1.6 GB during initialization (this is not fine).
This patch fixes two things:
1) do not allocate each elf program twice.
2) do not allocate memory for areas that are only zeros.
For this we need a new field in Rom: "datasize" which is the size of the
allocated data. If datasize is less than romsize, it means that the area
from datasize to romsize is filled with zeros.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This h_call is useful for DLPAR in future amongst other things. Given an index
it fetches the corresponding PTE stored in the htab.
Signed-off-by: Erlon Cruz <erlon.cruz@br.flextronics.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the spapr-vlan device does not supply a cleanup call for its
NetClientInfo structure. With current qemu versions, that leads to a SEGV
on exit, when net_cleanup() attempts to call the cleanup handlers on all
net clients.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
virtio-console.c used to return a value less than the number of bytes
asked to be written out to a chardev backend in case the backend is not
writable. virtio-serial-bus.c then implicitly enabled flow control for
that port.
Make this explicit instead.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: f5ec50b068c25422256e499cf4adc06d353bf394.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-serial-bus already has the logic to make flow control work
properly. Hook into the char layer's new ability to signal a backend is
writable again.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: abffa02235d55ca6e2489068c58971c8897e976c.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The address_space field of PCIHostState was only ever written, never used.
Drop it completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The milkymist-minimac device in fact does not exist at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The BIT6 of Status Register(SR):
SR[6] behaves the same as R/B# pin
SR[6] = 0 indicates the device is busy;
SR[6] = 1 means the device is ready
Some NAND flash controller (i.e. ftnandc021) relies on the SR[6]
to determine if the NAND flash erase/program is success or error timeout.
P.S:
The exmaple NAND flash datasheet could be found at following link:
http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/8FEA549237D2F7674825795800104C26/$File/MX30LF1G08AA,%203V,%201Gb,%20v1.1.pdf
Signed-off-by: Kuo-Jung Su <dantesu@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Always check it immediately after calling bdrv_acct_done, and
always do a "goto done" in case the "done" label has to free
some memory---as is the case for scsi_unmap_complete in the
previous patch.
This patch could fix problems that happen when a request is
split into multiple parts, and one of them is canceled. Then
the next part is fired, but the HBA's cancellation callbacks have
fired already. Whether this happens or not, depends on how the
block/ driver implements AIO cancellation. It it does a simple
bdrv_drain_all() or similar, then it will not have a problem.
If it only cancels the given AIOCB, this scenario could happen.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Canceled requests should never be completed, and doing that could cause
accesses to a NULL hba_private field.
Cc: qemu-stable@nongnu.org
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement support for using the KVM in-kernel GIC for ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Convert the ARM GIC classes to use init/realize rather than
SysBusDevice::init. (We have to do them all in one patch to
avoid unconverted subclasses calling a nonexistent SysBusDevice
init function in the base class and crashing.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Add presave/postload hooks to the ARM GIC common base class.
These will be used by the KVM in-kernel GIC subclass to sync
state between kernel and userspace when migrating.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add basic support for KVM on ARM architecture.
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
[PMM: Minor tweaks and code cleanup, switch to ONE_REG]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
# By MORITA Kazutaka (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: for HMP commit() operations on 'all', skip non-COW drives
sheepdog: add support for connecting to unix domain socket
sheepdog: use inet_connect to simplify connect code
sheepdog: accept URIs
move socket_set_nodelay to osdep.c
slirp/tcp_subr.c: fix coding style in tcp_connect
dataplane: remove EventPoll in favor of AioContext
virtio-blk: fix unplug + virsh reboot
ide/macio: Fix macio DMA initialisation.
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRL1gUAAoJECgfDbjSjVRpIk4IAL17zSadWgd99ZrH6EtZ3/cw
mhuxgm+vRfZPHl82lGC/NthLrTbJ5hpVe1Ff9vrMIkx3OZsh97iqoXS4iPjo9804
Pb5zhDqHJQJDTQKCllb9seu6e5D9Fw3aPp+BcH5QfyEOc/X5l0c5IffRdo6xDT9G
1dDEywntl/wwfCej/kVBu4H7G2/bF7wEMvda7kvBPzZsc6y0TsDSAewk5EX54+/p
wRKw8IBa/T2/ldSoBcqPW1Zd2oeuvKhty4vrXlO1UVZi+uTWNmJxUm6Z1GqNInvE
im0FGlSxwTJF7nX3JQv6tB46GRL8V/IC5+9I5UJc5nT8ScrX4rIxRbJTnsRkn4Y=
=eUQN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,vhost,pci,e1000
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 28 Feb 2013 07:13:56 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Set virtio-serial device to have a default of 2 MSI vectors.
ICH9 LPC: Reset Control Register, basic implementation
Fix guest OS hang when 64bit PCI bar present
e1000: unbreak the guest network migration to 1.3
vhost: memory sync fixes
# By Jason Wang (2) and others
# Via Stefan Hajnoczi
* stefanha/net:
qmp: netdev_add is like -netdev, not -net, fix documentation
doc: document -netdev hubport
net: reduce the unnecessary memory allocation of multiqueue
tap: set IFF_ONE_QUEUE per default
tap: forbid creating multiqueue tap when hub is used
net: fix unbounded NetQueue
net: fix qemu_flush_queued_packets() in presence of a hub
During the review of the dataplane code, the EventPoll API morphed itself
(not concidentially) into something very very similar to an AioContext.
Thus, it is trivial to convert virtio-blk-dataplane to use AioContext,
and a first baby step towards letting dataplane talk directly to the
QEMU block layer.
The only interesting note is the value-copy of EventNotifiers. At least
in my opinion this is part of the EventNotifier API and is even portable
to Windows. Of course, in this case you should not close the notifier's
underlying file descriptors or handle with event_notifier_cleanup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk registers a vmstate change handler. Unfortunately this
handler is not unregistered on unplug, leading to some random
crashes if the system is restarted, e.g. via virsh reboot.
Lets unregister the vmstate change handler if the device is removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 07a7484e5d accidentally introduced a bug
in the initialisation of the second macio DMA device which could cause some
DMA operations to segfault QEMU.
CC: Andreas Färber <afaerber@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Done with this script:
cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`
This is so that paths remain valid as files are moved.
Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This doesn't happen in the real hardware. The Zynq TRM explicitly states that
this bit has no effect on the rx descriptor pointer ("The receive queue
pointer register is unaffected").
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 06fdf92b78ee62d8965779bafd29c8df1a5d2718.1360901435.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bits in the ISR were continually mirroring their corresponding TX/RX SR bits.
This is incorrect. The ISR bits are only ever set at the time their
corresponding event occurs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: cedfb6d108318846480b416a6041023ea5a353d6.1360901435.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gem_receive() function replicates the logic for whether or not the device
can rx. Just call the actual gem_can_receive() function in place.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: bf7f93969f3e01fbc76d68d2955307fdbad11bb1.1360901435.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, M25P80 uses an object property to differentiate between flash parts.
Changed this over to use QOM sub-classes - the actual names of the different parts
are used to create a set of dynamic classes which passes the part info as class
data. The object no longer needs to search the known_devices table for itself,
instead it just gets its info from its own class.
Kept the intermediate class definition private to m25p80.c for the moment, as
the expectation is parts will only be added as new entries in the table. We can
factor out the TYPE_M25P80 abstraction into a header on a demand basis.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: e24e156d-ff96-4901-997a-e31178b08bee@VA3EHSMHS021.ehs.local
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx Zynq device has two SDHCI controllers. Added to the machine model.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device model for standard SD Host Controller Interface (SDHCI) compliant with
version 2.00 of SD association specification.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split the SCU in a9mpcore out into its own object definition. mpcore is now
just a container for the mpcore components.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field was write only and thus unused. Removed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In QEMU emulation, there is no functional difference between the ARM mpcore
private timers and watchdogs. Removed all the distinction between the two from
arm_mptimer.c and converted it to be just the mptimer. a9mpcore and arm11mpcore
just instantiate the same mptimer object twice to get both timer and WDT.
If in the future we want to make the WDT functionally different then we can use
either QOM hierarchy to derive WDT from from mptimer, or we can add a property
"is-wdt" or some such.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To conform with QEMU coding style.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Trivial find replace on type names "timerblock" and "arm_mptimer_state" to
conform with QEMU coding style.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code for handling the default "unknown command state" case in
pflash_read in pflash_cfi01.c comments "reset state & treat it as
a read". However the code doesn't actually do this. Moving the
default case to the top of the switch so it can fall through into
the read case brings this file into line with pflash_cfi02 and
makes the code behave as the comments suggest.
The pflash_cfi01 code has always had this bug -- it was presumably
introduced when the original author copied the cfi02 code and
rearranged the order of the switch statement without noticing
that the default case relied on the fall-through.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1358777318-7579-3-git-send-email-peter.maydell@linaro.org
The Intel flash command set requires that a read operation after
doing a 'single byte write' command returns the status register;
add this case to pflash_read() so we return the correct information.
Similarly, the case for the 0x28 flavour of block erase was missing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1358777318-7579-2-git-send-email-peter.maydell@linaro.org
The proper mapping between 24 hours and 12 hours modes is:
0 12 AM
1-11 1-11 AM
12 12 PM
13-23 1-11 PM
Fix code accordingly.
Signed-off-by: Antoine Mathys <barsamin@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-serial device is expected to use 2 MSI vectors, one for
control queue and a second shared for all queues.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit does the same for the ICH9 LPC as commit 1ec4ba74 for the
PIIX3. For the present we're ignoring the Full Reset (FULL_RST) and System
Reset (SYS_RST) bits; the guest can read them back but that's it.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch addresses the issue fully described here:
http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg01804.html
Linux kernels prior to 2.6.36 do not disable the PCI device during
enumeration process. Since lower and higher parts of a 64bit BAR
are programmed separately this leads to qemu receiving a request to occupy
a completely wrong address region for a short period of time.
We have found that the boot process screws up completely if kvm-apic range
is overlapped even for a short period of time (it is fine for other
regions though).
This patch raises the priority of the kvm-apic memory region, so it is
never pushed out by PCI devices. The patch is quite safe as it does not
touch memory manager.
Signed-off-by: Alexey Korolev <akorolex@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a
1.3 machine during link auto negotiation, the guest link will be set to down.
Fix this by just disabling auto negotiation for 1.3 and older.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Edivaldo reports a problem that the array of NetClientState in NICState is too
large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not
used.
Instead of static arrays, solving this issue by allocating the queues on demand
for both the NetClientState array in NICState and VirtIONetQueue array in
VirtIONet.
Tested by myself, with single virtio-net-pci device. The memory allocation is
almost the same as when multiqueue is not merged.
Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes two bugs related to memory sync during
migration:
- ram address calculation was missing the chunk
address, so the wrong page was dirtied
- one after last was used instead of the
end address of a region, which might overflow to 0
and cause us to skip the region when the region ends at
~0x0ull.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
# By Paolo Bonzini (7) and others
# Via Kevin Wolf
* kwolf/for-anthony: (22 commits)
pc: add compatibility machine types for 1.4
blockdev: enable discard by default
qemu-nbd: add --discard option
blockdev: add discard suboption to -drive
block: implement BDRV_O_UNMAP
block: complete all IOs before .bdrv_truncate
coroutine: trim down nesting level in perf_nesting test
coroutine: move pooling to common code
qemu-iotests: Test qcow2 image creation options
qemu-iotests: Add qemu-img compare test
qemu-img: Add compare subcommand
qemu-img: Add "Quiet mode" option
block: Add synchronous wrapper for bdrv_co_is_allocated_above
block: refuse negative iops and bps values
block: use Error in do_check_io_limits()
qcow2: support compressed clusters in BlockFragInfo
qemu-img: add compressed clusters to BlockFragInfo
qemu-img: fix missing space in qemu-img check output
qcow2: record fragmentation statistics during check
qcow2: introduce check_refcounts_l1/l2() flags
...
This fixes the following compilation error:
hw/usb/hcd-xhci.c:1156:17: error: format ‘%llx’ expects argument of type
‘long long unsigned int’, but argument 4 has type ‘unsigned int’
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Because discard is now a host parameter, we can always fake it as enabled
in the guest. This is an extension of the current choice to ignore
"not supported" errors from the host when discard_granularity is set
to nonzero.
The default granularity is set to the logical block size or 4k, whichever
is largest, because cluster sizes below 4k are rarely used and 4K is a
typical block size for files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8550a02d12 added a streams
parameter to usb_wakeup and didn't update redirect.c. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case host and guest endianness differ the vga code first creates
a shared surface (using qemu_create_displaysurface_from), then goes
patch the surface format to indicate that the bytes must be swapped.
The switch to pixman broke that hack as the format patching isn't
propagated into the pixman image, so ui code using the pixman image
directly (such as vnc) uses the wrong format.
Fix that by adding a byteswap parameter to
qemu_create_displaysurface_from, so we'll use the correct format
when creating the surface (and the pixman image) and don't have
to patch the format afterwards.
[ v2: unbreak xen build ]
Cc: qemu-stable@nongnu.org
Cc: mark.cave-ayland@ilande.co.uk
Cc: agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM
with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU
would just hang. However, when I used -m 256, the machine would boot.
I looked through the code in hw/ and it seems there is an error when the
RAM memory is setup (if my understanding is correct).
After patching it, the machine launched and booted successfully with 512MB of
RAM.
Signed-off-by: Alin Tomescu <tomescu.alin@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This gives an awful silent failure when it doesn't work. Assert against link
creation failure.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add streams support to the xhci emulation. No secondary streams yet,
only linear stream arays are supported for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for usb3 streams to the usb subsystem core.
This is just adding a streams field / parameter in a number of places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix the ordering of the endpoint descriptors for superspeed endpoints:
The superspeed companion must come first, possible additional
descriptors for the endpoint after that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_packet_copy can handle combined packets now,
so it isn't needed to special-case them any more.
Also use the new usb_packet_size() function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code handling the "-usbdevice host:..." legacy command line
syntax is moved to the new hw/usb/host-legacy.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Leave the core usb devices (usb hub, tablet, mouse, keyboard)
enabled unconditionally. Make the other ones configurable.
Exceptions:
- bluetooth: not qdevified yet, has a vl.c dependency because
of that, thus disabling isn't as easy as not linking the
object file.
- smardcard: ccid-card-emulated depends on that one *and*
CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes
as separate patch because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Prepares for assigning IRQs before QOM realize.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361010446-1427-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to instantiate a CPU subtype we will need to know which type,
so move the cpu_model splitting into cpu_x86_init().
Parameters need to be set on the X86CPU instance, so move
cpu_x86_parse_featurestr() into cpu_x86_init() as well.
This leaves cpu_x86_register() operating on the model name only.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The helper functions all access ppc-specific fields only so don't bother
to change arguments to PowerPCCPU and use env_ptr instead.
No functional change.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Potentially env could be NULL whereas cpu would still be valid and
correspond to a previous env.
Wrapping this in qemu_get_cpu(), env is no longer needed, so simplify
code that existed before 55e5c28502.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since we still need env for ppc-specific fields, obtain it via the new
env_ptr fields to avoid "cpu" name conflicts between CPUState and
PowerPCCPU for now.
This fixes a potential issue with env being NULL at the end of the loop
but cpu still being a valid pointer corresponding to a previous env.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Explictly NULL it on CPU reset since it was located before breakpoints.
Change vapic_report_tpr_access() argument to CPUState. This also
resolves the use of void* for cpu.h independence.
Change vAPIC patch_instruction() argument to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The device returns false from the can receive function when the FIFO is
full. This means the device should check for buffered input whenever a byte is
popped from the FIFO.
Reported-by: Jason Wu <huanyu@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1360632571-25638-1-git-send-email-peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are two ways to express an interruption subclass:
- As a bitmask, as used in cr6.
- As a number, as used in the I/O interruption word.
Unfortunately, we have treated to I/O interruption word as if it
contained the bitmask as well, which went unnoticed so far as
- (queued-for-next) kvm made the same mistake, and
- Linux guest kernels don't check the isc value in the I/O interruption
word for subchannel interrupts.
Make sure that we treat the I/O interruption word correctly.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Starting a qemu with an sclp console and pressing a key very early
can result in
"qemu-system-s390x: hw/s390x/sclpconsole.c:60: receive_from_chr_layer:
Assertion `scon->iov' failed."
Lets make sure that the init process is finished, since the iov is
allocated after CHR_EVENT_OPENED by also checking for scon->iov.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This function has nothing to do with ethernet. Its reusable for all DMA clients.
Dropped the "ethernet" in the name accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Pulled the qdev_create functionality out of xilinx_axiethernet_create() and
pushed it up to the petalogix_ml605_mmu machine model. This makes the ethernet
create+init process consistent with the AXI DMA. Renamed function to
xilinx_axiethernet_init accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Atmel, SST and Intel/Numonyx serial flash tend to power up
with the software protection bits set.
And thus the new m25p80.c in linux kernel would always tries
to use WREN(0x06) + WRSR(0x01) to turn-off the protection.
The WEL(0x02) of status register is supposed to be cleared after
WRSR(0x01). There are also some drivers (i.e mine for RTOSes)
would check the WEL(0x02) in status register to make sure the
protection is correctly turned off.
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Use error_printf() instead, so the help gets presented more nicely.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The arguments of error_report() should yield a short error string
without newlines.
A few places try to print additional help after the error message by
embedding newlines in the error string. That's nice, but let's do it
the right way.
Since I'm touching these lines anyway, drop a stray preposition and
some tabs. We don't use tabs for similar messages elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The IRQ number of the second EHCI controller should be 76, not 75.
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new multiqueue feature adds fields to the virtio device config, which
breaks Windows guests. Disable the feature by default until the Windows
drivers are fixed.
Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, the config size for virtio devices is hard coded. When a new
feature is added that changes the config size, drivers that assume a static
config size will break. For purposes of backward compatibility, there needs
to be a way to inform drivers of the config size needed to accommodate the
set of features enabled.
aliguori: merged in
- hw/virtio-net: use existing macros to implement endof
- hw/virtio-net: fix config_size data type
Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the pxa2xx performance counter related cp14 registers were converted
from a switch-statement implementation to the new table driven cpregs
format in commit dc2a9045c, the crn and crm values for all these
registers were accidentally transposed. Fix this mistake, which was
causing OpenBSD for Zaurus to fail to boot.
Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We use the clunk request to do the actual xattr operation. So don't
ignore the error value for fid clunk.
Security model "none" don't support posix acl. Without this patch
guest won't get EOPNOTSUPP error on setxattr("system.posix_acl_access")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixes a couple of regression bugs introduced by
b9d03e352c and related to
auto-negotiation:
- Auto-negotiation currently sets link up even if it was
forced down from the monitor.
- If Auto-negotiation was in progress during migration,
link will never come up.
As a fix, don't touch NC link_down field at all,
instead add code on receive path to check
guest link status.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
b0b873a078 bumped the vmstate version and
introduced an old-style load function to handle migration from prior
(<= 1.2) versions.
The load function passes the top-level PIIX4PMState pointer to
vmstate_load_state() to handle nested structs for APMState and
pci_status, which leads to corruption of the top-level PIIX4PMState,
since pointers to the nested structs are expected.
A segfault can be fairly reliably triggered by migrating from 1.2 and
issuing a reset, which will trigger a number of QOM operations which
rely on the now corrupted ObjectClass/Object members.
Fix this by passing in the expected pointers for vmstate_load_state().
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev_free and qbus_free have to do unparent+unref, because nobody else
drops the initial reference (the one included by object_initialize)
before them.
For device_init_func and do_device_add, this is trivially correct,
since the DeviceState goes out of scope.
For qdev_create, qdev_try_create and qbus_init, it is a bit more tricky.
What we are doing here is just assuming that the caller knows what it's
doing, and won't call qdev_free/qbus_free while the device is still there.
This is a pretty reasonable assumption and (behind the scenes) is also
what GObject/GTK does. GTK actually has a "floating reference" that
goes away as soon as the caller does gtk_container_add or something
like that, but in the end qbus_init and qdev_try_create are already
adding the new object to its qdev parent! So in the end the two solutions
are the same.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We want object_delete to disappear, and we will do this one class at a
time. Inline it for the qdev case, which we will tackle first.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that the unparent callbacks are complete, we can correctly account
more missing references.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Similarly, a bus holds a reference back to the device, and this will
prevent the device from going away as soon as this reference is counted
properly. To avoid this, move the unrealization of devices to the
unparent callback. This includes recursively unparenting all the buses
and (after the previous patch) the devices on those buses, which ensures
that the web of references completely disappears for all devices that
reside (in the qdev tree) below the one being unplugged.
After this patch, the qdev tree and the bus<->child relationship is
defined as "A is above B, iff unplugging A will automatically unplug B".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A device will never be finalized as long as it has a reference from
other devices that sit on its buses. To ensure that the references
go away, deassociate a bus from its children in the unparent callback
for the bus.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each device has a reference through the BusChild. This reference
was not accounted for, add it now.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove knowledge of QOM innards. The common part of pci_bus_new and
pci_bus_new_inplace is moved to a new function pci_bus_init.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make it clear that no BUS() macro is needed in the callers (in fact it
wouldn't work because the object has not been initialized yet with the
right class).
Suggested-by: Andreas Faerber <afaerber@suse.de>
Acked-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the common part to qbus_realize.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch add migration support for multiqueue virtio-net. Instead of bumping
the version, we conditionally send the info of multiqueue only when the device
support more than one queue to maintain the backward compatibility.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch implements both userspace and vhost support for multiple queue
virtio-net (VIRTIO_NET_F_MQ). This is done by introducing an array of
VirtIONetQueue to VirtIONet.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue virtio-net, the first step is to separate the virtqueue
related fields from VirtIONet to a new structure VirtIONetQueue. The following
patches will add an array of VirtIONetQueue to VirtIONet based on this patch.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a queue_index to VirtQueue and a helper to fetch it, this could be used by
multiqueue supported device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some device (such as virtio-net) needs the ability to destroy or re-order the
virtqueues, this patch adds a helper to do this.
Signed-off-by: Jason Wang <jasowang>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch lets vhost support multiqueue. The idea is simple, just launching
multiple threads of vhost and let each of vhost thread processing a subset of
the virtqueues of the device. After this change each emulated device can have
multiple vhost threads as its backend.
To do this, a virtqueue index were introduced to record to first virtqueue that
will be handled by this vhost_net device. Based on this and nvqs, vhost could
calculate its relative index to setup vhost_net device.
Since we may have many vhost/net devices for a virtio-net device. The setting of
guest notifiers were moved out of the starting/stopping of a specific vhost
thread. The vhost_net_{start|stop}() were renamed to
vhost_net_{start|stop}_one(), and a new vhost_net_{start|stop}() were introduced
to configure the guest notifiers and start/stop all vhost/vhost_net devices.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.
After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
DeviceState::parent_bus is document as private and should be accessed
through qdev_get_parent_bus(). Use a DEVICE() cast instead of accessing
ISADevice's qdev field directly. Use ISA_BUS() in place of DO_UPCAST().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not being used in hot paths and is obsoleted by I2C_SLAVE()
QOM cast macro. Clean it up using a scripted conversion, so that it
doesn't get used in new code.
Some of its callers were combining it with FROM_I2C_SLAVE() macro, which
is equally obsolete but needs to be replaced in a type-specific way.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 84dd212024.
I'm not sure what issue the original commit was meant to fix, or if
the logic is actually wrong, but it causes e1000 to stop working
after a guest issues a reset.
>From what I can tell a guest with an e1000 nic has no way of changing
the link status, as far as it's NetClient peer is concerned, except
in the auto-negotiation path, so with this patch in place there's no
recovery after a reset, since the link goes down and stays that way.
Revert this patch now to fix the bigger problem, and handle any
lingering issues with a follow-up.
Reproduced/tested with qemu-jeos and Ubuntu 12.10.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Andreas Färber
# Via Alexander Graf
* agraf/s390-for-upstream:
target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()
target-s390x: Clean up cpu_inject_*() signatures
target-s390x: Fix debug output
target-s390x: Fix debug output (continued)
# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu:
linux-user: bsd-user: Don't reset X86CPU twice
target-i386: Pass X86CPU to cpu_x86_set_a20()
target-unicore32: Rename CPU subtypes
target-openrisc: Rename CPU subtypes
target-openrisc: TYPE_OPENRISC_CPU should be abstract
target-m68k: Rename CPU subtypes
target-m68k: Mark as unmigratable
target-s390x: Mark as unmigratable
target-sh4: Mark as unmigratable
target-xtensa: Mark as unmigratable
target-microblaze: Mark as unmigratable
target-unicore32: Mark as unmigratable
ide/mmio: QOM'ify MMIO IDE for R2D
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRCmGLAAoJECgfDbjSjVRp6PUH/1YsrRgrPUEhrhHwM4OPAMB5
D/kcTwrS4R7XNk6HRElfVnPbDYl2iIqi7a6RrY/x2jQvMBaghT5v6w07kg9gCooF
qNpHUr0y2YHy9yIFpG36SntqDmXXqvd4ngAMn7EviDH6OvwI8dSqbIVRUFc8yw5c
g+EyEQpyZieBVEGnWPEl6qDo4KFw9nU3p0A93fsQnKikXet00d+V01hQ4TALbBxk
EkeM1tYTjVlHOZAPsq6I2/CvRCO7YbIaboJJ9ZQ83GCX7TEsYELaMOc1qxVOAv0k
rKVijwqyHvhncxumPM/NIUuSnQTQxxeJmV4mWLARPGSh7FYorqMesnY4p1aX4RQ=
=k7PQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,make,pci,e1000,vfio,piix
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 31 Jan 2013 06:20:27 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (6) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vfio-pci: Enable PCIe extended config space
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
ich9: add support for pci assignment
virtio-net: rename ctrl rx commands
virtio-net: introduce a new macaddr control
virtio-net: remove layout assumptions for ctrl vq
virtio-net: revert mac on reset
rules/mak: make clean should blow away timestamp files
Makefile: clean timestamp generation rule
rules.mak: cleanup config generation rules
e1000: document ICS read behaviour
This prepares for moving the halted field to CPUState.
Most call sites can already supply S390CPU, for some env becomes unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Despite cautioning that S390CPU is needed for upcoming CPUState
refactorings, commit 5d69c547d9 (s390:
I/O interrupt and machine check injection.) added functions
cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument,
claiming consistency with cpu_inject_ext().
This complicates making cpu_interrupt() take a CPUState even more and it
required to pass &cpu->env from some S390CPU-aware call sites already,
creating inconsistency elsewhere. Address that.
This also eliminates the need for CPUS390XState in s390_virtio_irq().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Prepares for cpu_interrupt() changing argument to CPUState.
While touching it, rename to x86_cpu_...() now that it takes an X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
It was not qdev'ified before, so turn it into a SysBusDevice.
Keep mmio_ide_init_drives() around to attach the hard drive.
Signed-off-by: Andreas Färberr <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Christoffer Dall (1) and Peter Maydell (1)
# Via Peter Maydell
* pmaydell/arm-devs.next:
hw/vexpress: Use correct HBI (board model number) for vexpress-a15
hw/arm_sysctl: Clear sysctl cfgctrl start bit
# By Markus Armbruster (12) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
qmp-commands.hx: s/tray-open/tray_open/ to match qapi schema
tests: Fix {rtc, m48t59}-test build on illumos
qemu-pixman.h: Avoid mutual inclusion loop with console.h
qemu-ga: Fix unchecked strdup() by converting to g_strdup()
qapi: Fix unchecked strdup() by converting to g_strdup()
libcacard: Fix unchecked strdup() by converting to g_strdup()
qemu-log: Plug trivial memory leak in cpu_set_log_filename()
qemu-log: Fix unchecked strdup() by converting to g_strdup()
virtfs-proxy-helper: Fix unchecked strdup() by conv. to g_strdup()
spice: Fix unchecked strdup() by converting to g_strdup()
readline: Fix unchecked strdup() by converting to g_strdup()
hw/9pfs: Fix unchecked strdup() by converting to g_strdup()
g_strdup(NULL) returns NULL; simplify
g_malloc(0) and g_malloc0(0) return NULL; simplify
xilinx_axidma: Fix debug mode compile messages
cadence_gem: Debug mode compile fixes
cadence_ttc: Debug mode compile fixes
vnc: Clean up vncws_send_handshake_response()
# By Andreas Färber
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Move PReP machine to hw/ppc/
prep_pci: Convert to QOM realizefn
prep_pci: Create PCIBus and PCIDevice in-place
The vexpress-a15 QEMU model is supposed to be a V2P-CA15; the HBI
(a kind of board model number) for this coretile is 237, not 217.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The start bit should only be set to indicate that a function call is
underway, right now. When done with function, clear it.
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note: the allocation in virtio_9p_init() is still leaked. To be fixed
in a followup commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Once upon a time, it was decided that qemu_malloc(0) should abort.
Switching to glib retired that bright idea. Some code that was added
to cope with it (e.g. in commits 702ef63, b76b6e9) is still around.
Bury it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Missing cast one one of the conditionally compiled printfs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some printfs are throwing warnings when debug mode is enabled. Fixed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some printfs are throwing warnings when debug mode is enabled. Fixed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't know pre-init time whether the device we're exposing is PCIe
or legacy PCI. We could ask for it to be specified via a device
option, but that seems like too much to ask of the user. Instead we
can assume everything will be PCIe, which makes PCI-core allocate
enough config space. Removing the flag during init leaves the space
allocated, but allows legacy PCI devices to report the real device
config space size to rest of Qemu.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fills out support for the pci assignment API. Added:
PCIINTxRoute ich9_route_intx_pin_to_irq(void *opaque, int pirq_pin)
Add calls to pci_bus_fire_intx_routing_notifier() when routing changes
are made.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch makes rx commands consistent with specification.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio-net guest driver, currently we write MAC address to
pci config space byte by byte, this means that we have an
intermediate step where mac is wrong. This patch introduced
a new control command to set MAC address, it's atomic.
VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility.
"mac" field will be set to read-only when VIRTIO_NET_F_CTRL_MAC_ADDR
is acked.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio-net code makes assumption about virtqueue descriptor layout
(e.g. sg[0] is the header, sg[1] is the data buffer).
This patch makes code not rely on the layout of descriptors.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once guest overrides virtio net primary mac,
it retains the value set until qemu exit.
This is inconsistent with standard nic behaviour.
To fix, revert the mac to the original value on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add code comment to clarify the reason we set ICS with ICR:
the reason was previously undocumented and git
log confused rather than clarified the comments.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
set_bit on indicators doesn't go well on 32 bit targets:
note: expected 'long unsigned int *' but argument is of type 'uint64_t *'
Switch to bit shifts instead.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
[agraf: use 1ULL instead]
Signed-off-by: Alexander Graf <agraf@suse.de>
Changed error codes in the channel subsystem / virtio-ccw code
(-EOPNOTSUPP -> -ENOSYS, -ERESTART -> -EINPROGRESS).
This should hopefully fix building on mingw32.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Map the I/O interruption code before calling into css.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new machine type, s390-ccw-virtio, making use of the
virtio-ccw transport to present virtio devices as channel
devices.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
s390_virtio_bus_find_mem() may return a NULL VirtIOS390Device.
If called with, e.g., args[0] == 0, this leads to a segfault.
Fix this by adding error handling as done for other hypercalls.
Present since baf0b55a9e (Implement
virtio reset).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves all files only used by s390 system emulation to hw/s390x.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
virtio-s390 devices are not being reset when their bus is. To fix
this, add a reset method that forwards to virtio_reset. This is
only needed because of the "strange" modeling of virtio devices;
the ->vdev link is being handled manually rather than through qdev.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new virtio transport that uses channel commands to perform
virtio operations.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some of the machine initialization for s390-virtio will be reused
by virtio-ccw.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current s390 machine uses the virtio console as default console,
but this doesn't mean that we always want to keep it that way for new
machines.
This patch introduces a way for a machine type to specify that it wants
the default console to be an SCLP console, which is a lot closer to what
real hardware does.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* afaerber/qom-cpu: (37 commits)
kvm: Pass CPUState to kvm_on_sigbus_vcpu()
cpu: Unconditionalize CPUState fields
target-m68k: Use type_register() instead of type_register_static()
target-unicore32: Use type_register() instead of type_register_static()
target-openrisc: Use type_register() instead of type_register_static()
target-unicore32: Catch attempt to instantiate abstract type in cpu_init()
target-openrisc: Catch attempt to instantiate abstract type in cpu_init()
target-m68k: Catch attempt to instantiate abstract type in cpu_init()
target-arm: Catch attempt to instantiate abstract type in cpu_init()
target-alpha: Catch attempt to instantiate abstract type in cpu_init()
qom: Introduce object_class_is_abstract()
target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init()
target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init()
target-m68k: Detect attempt to instantiate non-CPU type in cpu_init()
target-alpha: Detect attempt to instantiate non-CPU type in cpu_init()
target-arm: Detect attempt to instantiate non-CPU type in cpu_init()
cpu: Add model resolution support to CPUClass
target-i386: Remove setting tsc-frequency from x86_def_t
target-i386: Set custom features/properties without intermediate x86_def_t
target-i386: Remove vendor_override field from CPUX86State
...
Conflicts:
tests/Makefile
Resolved simple conflict caused by lack of context in Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
# By Lei Li (3) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
QAPI: Introduce memchar-read QMP command
QAPI: Introduce memchar-write QMP command
qemu-char: Add new char backend CirMemCharDriver
docs: document virtio-balloon stats
balloon: re-enable balloon stats
balloon: drop old stats code & API
block: Monitor command commit neglects to report some errors
SysBusDeviceClass' initfn merely calls SysBusDeviceClass::init, so we
can already hook up our own realizefn overwriting this behavior.
A symmetric unrealizefn is not necessary, knowing that the child's
unrealizefn is still no-op, too. Avoids ripping it out again when
recursive realization at DeviceState-level is implemented.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This keeps compatibility on machine-types pc-1.2 and older, and prints a
warning in case the requested configuration won't get the correct
topology.
I couldn't think of a better way to warn about broken topology when in
compat mode other than using error_report(). The warning message will
probably be buried in a log file somewhere, but it's better than
nothing.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes FW_CFG_MAX_CPUS and FW_CFG_NUMA to use apic_id_for_cpu(),
so the NUMA table can be based on the APIC IDs, instead of CPU index
(SeaBIOS knows nothing about CPU indexes, just APIC IDs).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
PC will not use max_cpus for that field, so move it outside the common
code so it can use a different value on PC.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently, the pc-1.4 machine init function enables PV EOI and then
calls the pc-1.2 machine init function. The problem with this approach
is that now we can't enable any additional compatibility code inside the
pc-1.2 init function because it would end up enabling the compatibility
behavior on pc-1.3 and pc-1.4 as well.
This reverses the logic so that the pc-1.2 machine init function will
disable PV EOI, and then call the pc-1.4 machine init function.
This way we can change older machine-types to enable compatibility
behavior, and the newer machine-types (pc-1.3, pc-q35-1.4 and
pc-i440fx-1.4) would just use the default behavior.
(This means that one nice side-effect of this change is that pc-q35-1.4
will get PV EOI enabled by default, too)
It would be interesting to eventually change pc_init_pci_no_kvmclock()
and pc_init_isa() to reuse pc_init_pci_1_2() as well (so we don't need
to duplicate compatibility code on those two functions). But this will
be probably much easier to do after we create a PCInitArgs struct for
the PC initialization arguments, and/or after we use global-properties
to implement the compatibility modes present in pc_init_pci_1_2().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to moving back to the IDLE state after the COLLECTING_DATA
state. For a well behaved guest this patch has no consequence, but
A bad guest could crash QEMU by using one of the erase commands
followed by a longer than 5 byte argument (undefined behaviour).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Software services a received packet by clearing the CTRL_S bit in the RX_CTRLn
register. If this bit is cleared, flush any packets queued for the device.
Reported-by: John Williams <john.williams@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The eth_can_rx() function only checks the first buffers status ("ping"). The
controller should be able to receive into "pong" when ping-pong is enabled.
Checks the active buffer (either "ping" or "pong") when determining can_rx()
rather than just testing "ping".
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
PPC: e500: Select MPIC v4.2 on ppce500 platform
PPC: e500: fix mpic_iack address
openpic: add basic support for MPIC v4.2
openpic: fix timer address decoding
openpic: fix remaining issues from idr-to-destmask conversion
pseries: Adjust default VIO address allocations to play better with libvirt
pseries: Improve handling of multiple PCI host bridges
target-ppc: Give a meaningful error if too many threads are specified
cuda: Move ADB bus into CUDA state
adb: QOM'ify ADB devices
adb: QOM'ify Apple Desktop Bus
cuda: QOM'ify CUDA
ide/macio: QOM'ify MacIO IDE
mac_nvram: QOM'ify MacIO NVRAM
mac_nvram: Mark as Big Endian
mac_nvram: Clean up public API
macio: Split MacIO in two
macio: Delay qdev init until all fields are initialized
macio: QOM'ify some more
ppc: Move Mac machines to hw/ppc/
This is a follow up for several attempts to fix this issue.
Previous incarnations:
1. http://thread.gmane.org/gmane.linux.ubuntu.bugs.general/3156089https://bugs.launchpad.net/bugs/918791
"qemu-kvm dies when using vmvga driver and unity in the guest" bug.
Fix by Serge Hallyn:
https://launchpadlibrarian.net/94916786/qemu-vmware.debdiff
This fix is incomplete, since it does not check width and height
for being negative. Serge weren't sure if that's the right place
to fix it, maybe the fix should be up the stack somewhere.
2. http://thread.gmane.org/gmane.comp.emulators.qemu/166064
by Marek Vasut: "vmware_vga: Redraw only visible area"
This one adds the (incomplete) check to vmsvga_update_rect_delayed(),
the routine just queues the rect updating but does no interesting
stuff. It is also incomplete in the same way as patch by Serge,
but also does not touch width&height at all after adjusting x&y,
which is wrong.
As far as I can see, when processing guest requests, the device
places them into a queue (vmsvga_update_rect_delayed()) and
processes this queue in different place/time, namely, in
vmsvga_update_rect(). Sometimes, vmsvga_update_rect() is
called directly, without placing the request to the gueue.
This is the place this patch changes, which is the last
(deepest) in the stack. I'm not sure if this is the right
place still, since it is possible we have some queue optimization
(or may have in the future) which will be upset by negative/wrong
values here, so maybe we should check for validity of input
right when receiving request from the guest (and maybe even
use unsigned types there). But I don't know the protocol
and implementation enough to have a definitive answer.
But since vmsvga_update_rect() has other sanity checks already,
I'm adding the missing ones there as well.
Cc'ing BALATON Zoltan and Andrzej Zaborowski who shows in `git blame'
output and may know something in this area.
If this patch is accepted, it should be applied to all active
stable branches (at least since 1.1, maybe even before), with
minor context change (ds_get_*(s->vga.ds) => s->*). I'm not
Cc'ing -stable yet, will do it explicitly once the patch is
accepted.
BTW, these checks use fprintf(stderr) -- it should be converted
to something more appropriate, since stderr will most likely
disappear somewhere.
Cc: Marek Vasut <marex@denx.de>
CC: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Align the device tree blob to a 4KB boundary, not to QEMU's
idea of a page boundary -- the latter is the smallest possible
page size for the architecture, which on ARM is 1KB.
The documentation for Linux does not impose separation
or alignment requirements on the device tree blob, but
in practice some kernels will happily trash the entire
page the initrd ends in after they have finished uncompressing
the initrd. So 4KB-align the DTB to ensure it does not get
trampled by these kernels.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
read_splashfile() passes the address of an int variable as size_t *
parameter to g_file_get_contents(), with a cast to gag the compiler.
No problem on machines where sizeof(size_t) == sizeof(int).
Happens to work on my x86_64 box (64 bit little endian): the least
significant 32 bits of the file size end up in the right place
(caller's variable file_size), and the most significant 32 bits
clobber a place that gets assigned to before its next use (caller's
variable file_type).
I'd expect it to break on a 64 bit big-endian box.
Fix up the variable types and drop the problematic cast.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
case THINGY_3: idx++;
case THINGY_2: idx++;
case THINGY_1: idx++;
case THINGY_0: return s->thingy[idx];
This makes static analysers happy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit 'return' statement to a case in smc91c111_readb
rather than relying on fallthrough to the following case's
return statement, for code clarity and to placate static analysers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mark the deliberate fallthrough where we treat the case of
an attempt to read flash when it is an unknown command
state as if it were a normal read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
case THINGY_3: idx++;
case THINGY_2: idx++;
case THINGY_1: idx++;
case THINGY_0: return s->thingy[idx];
This makes static analysers happy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark cases where we are deliberately falling
through to the following code. In one case we insert a
'break' instead of falling through to a 'break', as this
seems slightly clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add some break statements that were accidentally omitted
from some cases of arm_sysctl_write(). The omission was
harmless because in both cases the following case did
an immediate break, but adding the breaks explicitly
placates static analysers and avoids weird behaviour if
the following register is ever implemented as something
other than a no-op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
extra-obj-y is somewhat complicated to understand. Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The compatible string is changed to fsl,mpic on all e500 platforms, to
advertise the existence of BRR1. This matches what the device tree will
have on real hardware.
With MPIC v4.2 max_cpu can be increased from 15 to 32.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
MPIC+0xa0 is IACK for the current CPU. MPIC+0x200a0 is IACK for CPU 0.
This fix allows EPR to work with an SMP target.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Besides the new value in the version register, this provides:
- ILR support, which includes:
- IDR becoming a pure CPU bitmap, allowing 32 CPUs
- machine check output support (though other parts of QEMU need to
be fixed for it to do something other than immediately reboot the
guest)
- dummy error interrupt support (EISR0/EIMR0 read as zero)
- actually all FSL MPICs get all summary registers returning zero for now,
which includes EISR0/EIMR0
Various refactoring is done to support these changes and to ease
new functionality (e.g. a more flexible way of declaring regions).
Just as the code was already not a full implementation of MPIC v2.0,
this is not a full implementation of MPIC v4.2 -- e.g. it still has only
one bank of MSIs.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The timer memory range begins at 0x10f0, so that address 0x1120 shows
up as 0x30, 0x1130 shows up as 0x40, etc. However, the address
decoding (other than TFRR) is not adjusted for this, causing the
wrong registers to be accessed.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
openpic_update_irq() was checking idr rather than destmask, treating
it as if it were a simple bitmap of cpus. Changed to use destmask.
IPI delivery was removing bits directly from .idr, without calling
write_IRQreg_idr so that the change could be conveyed to destmask.
Changed to use destmask directly.
Save/restore destmask when serializing, as due to the IPI change it
cannot be reproduced from idr.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, if VIO devices for pseries don't have addresses explicitly
allocated, they get automatically numbered from 0x1000. This is in the
same general range that libvirt will typically assign VIO device addresses.
That means that if there is a device libvirt doesn't know about, and it
gets an address assigned before the libvirt assigned devices are processed,
we can end up with an address conflict (qemu will abort with an error).
While the real solution is to teach libvirt about the other devices, so it
can correctly manage the whole allocation, this patch reduces the interim
inconvenience by moving qemu allocations to a range that libvirt is less
likely to conflict with.
Because the guest gets the device addresses through the device tree, these
addresses are truly arbitrary and can be changed without breaking guests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Multiple - even many - PCI host bridges (i.e. PCI domains) are very
common on real PAPR compliant hardware. For reasons related to the
PAPR specified IOMMU interfaces, PCI device assignment with VFIO will
generally require at least two (virtual) PHBs and possibly more
depending on which devices are assigned.
At the moment the qemu PAPR PCI code will not deal with this well,
leaving several crucial parameters of PHBs other than the default one
uninitialized. This patch reworks the code to allow this.
Every PHB needs a unique BUID (Bus Unit Identifier, the id used for
the PAPR PCI related interfaces) and a unique LIOBN (Logical IO Bus
Number, the id used for the PAPR IOMMU related interfaces). In
addition they need windows in CPU real address space to access PCI
memory space, PCI IO space and MSIs. Properties are added to the PCI
host bridge qdevice to allow configuration of all these.
To simplify configuration of multiple PHBs for common cases, a
convenience "index" property is also added. This can be set instead
of the low-level properties, and will generate suitable values for the
other parameters, different for each index value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Replace the global adb_bus with a CUDA-internal one, accessed using
regular qdev child bus accessor.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
They were not qdev'ified before. Derive ADBDevice from DeviceState and
convert reset callbacks to DeviceClass::reset, ADBDevice::opaque pointer
to ADBDevice subtypes for mouse and keyboard and adb_{kbd,mouse}_init()
to regular qdev functions.
Fixing Coding Style issues and splitting keyboard and mouse off into
their own files is left for a later point in time.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was not a qbus before, turn it into a first-class bus and initialize
it properly from CUDA. Leave it a global variable as long as devices are
not QOM'ified yet.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was not qdev'ified before. Turn it into a SysBusDevice and embed it
in MacIO.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was not qdev'ified before. Turn it into a SysBusDevice.
Embed them into the MacIO devices.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
It was not qdev'ified before. Turn it into a SysBusDevice and
initialize it via static properties.
Prepare Old World specific MacIO state and embed the NVRAM state there.
Drop macio_nvram_setup_bar() in favor of sysbus_mmio_map() or
direct use of Memory API.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The state data field is accessed in uint8_t quantities, so switch from
uint32_t argument and return value to uint8_t.
Fix debug format specifiers while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Let the machines create two different types. This prepares to move
knowledge about sub-devices from the machines into the devices.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This turns macio_bar_setup() into an implementation detail of the qdev
initfn, to be removed step by step.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move bar MemoryRegion initialization to an instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add comments to help static analysers detect that these cases are
intentional, and clean up some whitespace in the environment of these
comments.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Jason tested these patches by migrating Windows 7 and Fedora 17 guests
(while under I/O) on both piix with ahci attached and on q35 (which has
a built-in AHCI controller).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The size of an int depends on the host, so in order to be able to
migrate these fields, make them either int32_t or bool, depending on the
use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'dma_status' and 'dma_cb' are written to, but never read.
Remove these fields in preparation for AHCI migration bits.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The statistics are now available through device properties via a
polling mechanism. First a client has to enable polling, then it
can query available stats.
Polling is enabled by setting an update interval (in seconds)
to a property named guest-stats-polling-interval, like this:
{ "execute": "qom-set",
"arguments": { "path": "/machine/peripheral-anon/device[1]",
"property": "guest-stats-polling-interval", "value": 4 } }
Then the available stats can be retrieved by querying the
guest-stats property. The returned object is a dict containing
all available stats. Example:
{ "execute": "qom-get",
"arguments": { "path": "/machine/peripheral-anon/device[1]",
"property": "guest-stats" } }
{
"return": {
"stats": {
"stat-swap-out": 0,
"stat-free-memory": 844943360,
"stat-minor-faults": 219028,
"stat-major-faults": 235,
"stat-total-memory": 1044406272,
"stat-swap-in": 0
},
"last-update": 1358529861
}
}
Please, check the next commit for full documentation.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Next commit will re-enable balloon stats with a different interface, but
this old code conflicts with it. Let's drop it.
It's important to note that the QMP and HMP interfaces are also dropped
by this commit. That shouldn't be a problem though, because:
1. All QMP fields are optional
2. This feature has always been disabled
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This reverts commit 67c5322d70:
I'm not sure if the retry logic has ever worked when not using FIFO mode. I
found this while writing a test case although code inspection confirms it is
definitely broken.
The TSR retry logic will never actually happen because it is guarded by an
'if (s->tsr_rety > 0)' but this is the only place that can ever make the
variable greater than zero. That effectively makes the retry logic an 'if (0)
I believe this is a typo and the intention was >= 0. Once this is fixed thoug
I see double transmits with my test case. This is because in the non FIFO
case, serial_xmit may get invoked while LSR.THRE is still high because the
character was processed but the retransmit timer was still active.
We can handle this by simply checking for LSR.THRE and returning early. It's
possible that the FIFO paths also need some attention.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Even if the previous logic was never worked, new logic breaks stuff -
namely,
qemu -enable-kvm -nographic -kernel /boot/vmlinuz-$(uname -r) -append console=ttyS0 -serial pty
the above command will cause the virtual machine to stuck at startup
using 100% CPU till one connects to the pty and sends any char to it.
Note this is rather typical invocation for various headless virtual
machines by libvirt.
So revert this change for now, till a better solution will be found.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a trivial patch to harmonize the coding style on
hw/etraxfs_eth.c. This is in preparation to split off the bitbang mdio
code into a separate file.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paul Brook <paul@codesourcery.com>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi: Drop useless null test in scsi_unit_attention()
lsi: use qbus_reset_all to reset SCSI bus
scsi: fix segfault with 0-byte disk
iscsi: add support for iSCSI NOPs [v2]
iscsi: partly avoid iovec linearization in iscsi_aio_writev
iscsi: add iscsi_create support
req was created by scsi_req_alloc(), which initializes req->dev to a
value it dereferences. req->dev isn't changed anywhere else.
Therefore, req->dev can't be null.
Drop the useless null test; it spooks Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a 0-sized disk is found, READ CAPACITY will return a
LUN NOT READY error. However, because it returns -1 instead
of zero, the HBA will call scsi_req_continue. This will
typically cause a segmentation fault or an assertion failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Basically the same as usb-storage, but without automatic scsi
device setup. Also features support for up to 16 LUNs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a simpler solution to 869981, where migration breaks since qxl's
rom bar size has changed. Instead of ignoring fields in QXLRom, which is what has
actually changed, we remove some of the modes, a mechanism already
accounted for by the guest. The modes left allow for portrait and
landscape only modes, corresponding to orientations 0 and 1.
Orientations 2 and 3 are dropped.
Added assert so that rom size will fit the future QXLRom increases via
spice-protocol changes.
This patch has been tested with 6.1.0.10015. With the newer 6.1.0.10016
there are problems with both "(flipped)" modes prior to the patch, and
the patch loses the ability to set "Portrait" modes. But this is a
separate bug to be fixed in the driver, and besides the patch doesn't
affect the new arbitrary mode setting functionality.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit a1cbfd554e.
Test isn't useless. scsi_req_enqueue() may finish the request (will
actually happen for requests which don't trigger any I/O such as
INQUIRY), then call usb_msd_command_complete() which in turn will
set s->req to NULL after unref'ing it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.
Resolve a Coding Style warning in openpic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A virtio-s390-bus is created during the init. So one VirtIODevice can be
connected on the virtio-s390-device through this bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This add the virtio-s390-bus which extends virtio-bus. So one VirtIODevice can
be connected on this bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create the virtio-pci device which is abstract. This transport device will
create a virtio-pci-bus, so one VirtIODevice can be connected.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce virtio-pci-bus, which extends virtio-bus. It is used with virtio-pci
transport device.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create the virtio-device which is abstract. All the virtio-device can extend
this class. It also add some functions to virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a max_dev field to BusClass to specify the maximum amount of devices allowed
on the bus (has no effect if max_dev=0)
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
STATUS_TIMEOUT is defined in winnt.h:
CC hw/tpci200.o
hw/tpci200.c:34:0:
warning: "STATUS_TIMEOUT" redefined [enabled by default]
/usr/lib/gcc/x86_64-w64-mingw32/4.6/../../../../x86_64-w64-mingw32/include/winnt.h:1036:0:
note: this is the location of the previous definition
Use STATUS_TIME instead of STATUS_TIMEOUT as suggested by Alberto Garcia.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-acpitable {file|data}=file reads the content of file, but it is
in binary form, so the file should be opened usin O_BINARY flag.
On *nix it is a no-op, but on windows and other weird platform
it is really needed.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
defineition -> definition
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Kevin Wolf (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: support viostor virtio-pci status bit setting
dataplane: avoid reentrancy during virtio_blk_data_plane_stop()
win32-aio: use iov utility functions instead of open-coding them
win32-aio: Fix memory leak
win32-aio: Fix vectored reads
aio: Fix return value of aio_poll()
ide: Remove wrong assertion
block: fix null-pointer bug on error case in block commit
84f2d0ea added an argument to function usb_host_info.
The stub function must match the declaration in usb.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Code mixes uint32_t, int and size_t. Very unlikely to go wrong in
practice, but clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB. Clean it
up anyway. Size overflow now fails assertions.
Bonus: saves a whole bunch of silly casts.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
No caller is checking the value, so all errors get ignored, usually
silently. assert() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
PPC: KVM: Add support for EPR with KVM
openpic: export e500 epr enable into a ppc.c function
Update Linux kernel headers
PPC: e500: Change in-memory order of load blobs
PPC: Provide zero SVR for -cpu e500mc and e5500
PPC: E500: Calculate loading blob offsets properly
openpic: set mixed mode as supported
openpic: unify gcr mode mask updates
openpic: move gcr write into a function
Allow virtio machines to register for different diag500 function
codes and convert s390-virtio to use it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This enables qemu -cpu help to return a list of supported CPU models
on s390 and also to query for cpu definitions in the monitor.
Initially only cpu model = host is returned. This needs to be reworked
into a full-fledged CPU model handling later on.
This change is needed to allow libvirt exploiters (like OpenStack)
to specify a CPU model.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[agraf: fix s390x-linux-user, adjust header locations]
Signed-off-by: Alexander Graf <agraf@suse.de>
Lets move the code to setup IPL for external kernel
or via the zipl rom into a separate file. This allows to
- define a reboot handler, setting up the PSW appropriately
- enhance the boot code to IPL disks that contain a bootmap that
was created with zipl under LPAR or z/VM (future patch)
- reuse that code for several machines (e.g. virtio-ccw and virtio-s390)
- allow different machines to provide different defaults
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: symbolify initial psw, adjust header file location, fix for QOM]
Signed-off-by: Alexander Graf <agraf@suse.de>
Enabling and disabling the EPR capability (mpic_proxy) is a system
wide operation. As such, it belongs into the ppc.c file, since that's
where PPC specific machine wide logic happens.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today, we load
<kernel> <initrd> <dtb>
into memory in that order. However, Linux has a bug where it can only
handle the dtb if it's within the first 64MB of where <kernel> starts.
So instead, let's change the order to
<kernel> <dtb> <initrd>
making Linux happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have 3 blobs we need to load when booting the system:
- kernel
- initrd
- dtb
We place them in physical memory in that order. At least we should.
This patch fixes the location calculation up to take any module into
account, fixing the dtb offset along the way.
Reported-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Raven MPIC implementation supports the "Mixed" mode to work with
an i8259. While we don't implement mixed mode, we should mark it as
a supported mode in the mode bitmap.
Signed-off-by: Alexander Graf <agraf@suse.de>
The mode mask already masks out bits we don't care about, so the
actual handling code can stay intact regardless.
Signed-off-by: Alexander Graf <agraf@suse.de>
The GCR register contains too much functionality to be covered inside
of the register switch statement. Move it out into a separate function.
Signed-off-by: Alexander Graf <agraf@suse.de>
The viostor virtio-blk driver for Windows does not use the
VIRTIO_CONFIG_S_DRIVER bit. It only sets the VIRTIO_CONFIG_S_DRIVER_OK
bit.
The viostor driver refreshes the virtio-pci status byte sometimes while
the guest is running. We misinterpret 0x4 (VIRTIO_CONFIG_S_DRIVER_OK)
as an indication that virtio-blk-data-plane should be stopped since 0x2
(VIRTIO_CONFIG_S_DRIVER) is missing. The result is that the device
becomes unresponsive.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When dataplane is stopping, the s->vdev->binding->set_host_notifier(...,
false) call can invoke the virtqueue handler if an ioeventfd
notification is pending. This causes hw/virtio-blk.c to invoke
virtio_blk_data_plane_start() before virtio_blk_data_plane_stop()
returns!
The result is that we try to restart dataplane while trying to stop it
and the following assertion is raised:
msix_set_mask_notifier: Assertion `!dev->msix_mask_notifier' failed.
Although the code was intended to prevent this scenario, the s->started
boolean isn't enough. Add s->stopping so that we can postpone clearing
s->started until we've completely stopped dataplane.
This way, virtqueue handler calls during virtio_blk_data_plane_stop()
are ignored. When dataplane is legitimately started again later we
already self-kick ourselves to resume processing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Wenchao Xia
# Via Luiz Capitulino
* luiz/queue/qmp:
HMP: add sub command table to info
HMP: move define of mon_cmds
HMP: add infrastructure for sub command
HMP: delete info handler
HMP: add QDict to info callback handler
Order of arguments of kvm_virtio_pci_irqfd_release
got mixed up in all calls.
As a result users see assertions during cleanup.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a documentation section "Methods" and discuss among others how to
handle overriding virtual methods.
Clarify DeviceClass::realize documentation and refer to the above.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The Bus Master IDE Active bit (BM_STATUS_DMAING) is not only set when
the request is still in flight, but also when it has completed and the
size of the physical memory regions in the PRDT was larger than the
transfer size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This obsoletes tmp105_set() and allows for better error handling.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce TYPE_ constant and cast macro.
Move the state struct to the new header to allow for future embedding.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
An early length postincrement in the TMP105's I2C TX path led to
transfers of more than one byte to place the second byte in the third
byte's place within the buffer and the third byte to get discarded.
Fix this by explictly incrementing the length after the checks but
before the callback is called, which again checks the length.
Adjust the Coding Style while at it.
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allows value sharing with qtest.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
scsi_req_new() never returns null, and scsi_req_enqueue() dereferences
the pointer, so checking for null is useless.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Without this default q35/ppc405 based machines would no longer boot
after commit e4ada29e90
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce the QOM realizefn suggested by Anthony.
Detailed documentation is supplied in the qdev header.
For now this implements a default DeviceClass::realize callback that
just wraps DeviceClass::init, which it deprecates.
Once all devices have been converted to DeviceClass::realize,
DeviceClass::init is to be removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Whether the device was initialized or not is QOM-level information and
currently unused. Drop it from device. This leaves the boolean state of
whether or not DeviceClass::init was called or not, a.k.a. "realized".
Suggested-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes the default boot order for pseries machine. This allows
the machine to handle a NULL boot order in case no -boot option is provided.
Thus it helps SLOF firmware to verify if boot order is specified in command
line or not. If no boot order is provided SLOF tries to boot from the
device set in the nvram.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avik Sil <aviksil@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch makes default boot order machine specific instead of
set globally. The default boot order can be set per machine in
QEMUMachine boot_order. This also allows a machine to receive a
NULL boot order when -boot isn't used and take an appropriate action
accordingly. This helps machine boots from the devices as set in
guest's non-volatile memory location in case no boot order is
provided by the user.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avik Sil <aviksil@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* afaerber/memory-ioport:
acpi_piix4: Do not use old_portio-style callbacks
xen_platform: Do not use old_portio-style callbacks
hw/dma.c: Fix conversion of ioport_register* to MemoryRegion
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/block:
block: Fix how mirror_run() frees its buffer
win32-aio: Fix how win32_aio_process_completion() frees buffer
scsi-disk: qemu_vfree(NULL) is fine, simplify
w32: Make qemu_vfree() accept NULL like the POSIX implementation
sheepdog: clean up sd_aio_setup()
sheepdog: multiplex the rw FD to flush cache
block: clear dirty bitmap when discarding
ide: issue discard asynchronously but serialize the pieces
ide: fix TRIM with empty range entry
block: make discard asynchronous
raw: support discard on block devices
raw-posix: remember whether discard failed
raw-posix: support discard on more filesystems
block: fix initialization in bdrv_io_limits_enable()
qcow2: Fix segfault on zero-length write
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* afaerber/qom-cpu:
target-i386: Use switch in check_hw_breakpoints()
target-i386: Avoid goto in hw_breakpoint_insert()
target-i386: Introduce hw_{local,global}_breakpoint_enabled()
target-i386: Define DR7 bit field constants
target-i386: Move kvm_check_features_against_host() check to realize time
target-i386: cpu_x86_register() consolidate freeing resources
target-i386: Move setting defaults out of cpu_x86_parse_featurestr()
target-i386: check/enforce: Check all feature words
target-i386/cpu.c: Add feature name array for ext4_features
target-i386: kvm_check_features_against_host(): Use feature_word_info
target-i386/cpu: Introduce FeatureWord typedefs
target-i386: Disable kvm_mmu by default
kvm: Add fake KVM constants to avoid #ifdefs on KVM-specific code
exec: Return CPUState from qemu_get_cpu()
xen: Simplify halting of first CPU
kvm: Pass CPUState to kvm_init_vcpu()
cpu: Move cpu_index field to CPUState
cpu: Move numa_node field to CPUState
target-mips: Clean up mips_cpu_map_tc() documentation
cpu: Move nr_{cores,threads} fields to CPUState
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Used HWADDR_PRIx for hwaddr PIIX4_DPRINTF()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The commit 5822993368 introduced a 1-shift for
some offset in DMA emulation.
Before the previous commit, which converted ioport_register_* to
MemoryRegion, the DMA controller registered 8 ioports with the following
formula:
base + ((8 + i) << d->shift) where 0 <= i < 8
When an IO occured within a Memory Region, DMA callback receives an
offset relative to the start address. Here the start address is:
base + (8 << d->shift).
The offset should be: (i << d->shift). After the shift is reverted, the
offsets are 0..7 not 1..8.
Fixes LP#1089996.
Reported-by: Andreas Gustafsson <gson@gson.org>
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that discard can take a long time, make it asynchronous.
Each LBA range entry is processed separately because discard
can be an expensive operation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ATA-ACS-3 says "If the two byte range length is zero, then the LBA
Range Entry shall be discarded as padding." iovecs are used as if
they are linearized, so it is incorrect to discard the rest of
this iovec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the declaration to qemu/cpu.h and add documentation.
The implementation still depends on CPUArchState for CPU iteration.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
To facilitate the field movements, pass MIPSCPU to malta_mips_config();
avoid that for mips_cpu_map_tc() since callers only access MIPS Thread
Contexts, inside TCG helpers.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Mingw32 headers define FAR, causing this warning:
/src/qemu/hw/pc87312.c:38:0: warning: "FAR" redefined [enabled by default]
In file included from /usr/local/lib/gcc/i686-mingw32msvc/4.7.0/../../../../i686-mingw32msvc/include/windows.h:48:0,
from /src/qemu/include/sysemu/os-win32.h:29,
from /src/qemu/include/qemu-common.h:46,
from /src/qemu/include/exec/ioport.h:27,
from /src/qemu/hw/isa.h:6,
from /src/qemu/hw/pc87312.h:28,
from /src/qemu/hw/pc87312.c:26:
/usr/local/lib/gcc/i686-mingw32msvc/4.7.0/../../../../i686-mingw32msvc/include/windef.h:34:0: note: this is the location of the previous definition
Avoid the warning by expanding the macros.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Prepare an instance_init function for the MemoryRegion init.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Fix the compilation error introduced by msg new field.
CC hw/9pfs/virtio-9p.o
In file included from /home/konradf/Documents/safe/greensocs/virtio-project/x86-qemu/qemu/hw/9pfs/virtio-9p.c:17:0:
/home/konradf/Documents/safe/greensocs/virtio-project/x86-qemu/qemu/hw/virtio-pci.h:30:16: erreur: field ‘msg’ has incomplete type
make: *** [hw/9pfs/virtio-9p.o] Erreur 1
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
virtio_pci_set_guest_notifiers() now takes an additional argument to
specify the number of virtqueues to assign a guest notifier for. This
causes a build breakage for CONFIG_VIRTIO_BLK_DATA_PLANE builds:
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c: In function
‘virtio_blk_data_plane_start’:
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c:451:47: error: too
few arguments to function ‘s->vdev->binding->set_guest_notifiers’
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c: In function
‘virtio_blk_data_plane_stop’:
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c:511:5: error: too few
arguments to function ‘s->vdev->binding->set_guest_notifiers’
make[1]: *** [hw/dataplane/virtio-blk.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [subdir-x86_64-softmmu] Error 2
Fix this by passing 1 as the number of virtqueues to assign notifiers
for.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixes the following:
/home/mdroth/w/qemu2.git/hw/virtio-pci.c: In function
‘kvm_virtio_pci_vector_unmask’:
/home/mdroth/w/qemu2.git/hw/virtio-pci.c:673:12: error: ‘ret’ may be
used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make: *** [hw/virtio-pci.o] Error 1
make: *** Waiting for unfinished jobs....
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The GE IP-Octal 232 is an IndustryPack module that implements eight
RS-232 serial ports, each one of which can be redirected to a
character device in the host.
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules.
A new bus type called 'IndustryPack' has been created so any
compatible module can be attached to this board.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This protocol extension reuses the same set of grant pages for all
transactions between the front/back drivers, avoiding expensive tlb
flushes, grant table lock contention and switches between userspace
and kernel space. The full description of the protocol can be found in
the public blkif.h header.
http://xenbits.xen.org/gitweb/?p=xen.git;a=blob_plain;f=xen/include/public/io/blkif.h
Speed improvement with 15 guests performing I/O is ~450%.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
On ioreq_release the full ioreq was memset to 0, loosing all the data
and memory allocations inside the QEMUIOVector, which leads to a
memory leak. Create a new function to specifically reset ioreq.
Reported-by: Maik Wessler <maik.wessler@yahoo.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* kraxel/usb.76:
usb-host: Initialize dev->port the obviously safe way
usb-host: Drop superfluous null test from usb_host_auto_scan()
ehci: Assert state machine is sane w.r.t. EHCIQueue
xhci: nuke transfe5rs on detach
xhci: call xhci_detach_slot on root port detach too
xhci: create xhci_detach_slot helper function
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This further optimizes MSIX handling in virtio-pci.
Also included is pci cleanup by Paolo, and pci device
assignment fix by Alex.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJQ7ZaiAAoJECgfDbjSjVRpFhcIAJkY4VQ3i7TLnLsnEDOR+FrP
66YLEDwCSiKZ/UW7WERGN3p3tm0hAXLhPoHFqMGRPPV9pdcXI+Eb8v+u0IHVlt+7
DsQ9TIemZkpSMuUJjQbu/RF8k9JV8+X7M6CKnWahq68p0UD/vDX+OgCiGKO/l/zY
tENJhwD6M1MMzbxyzd4nCnkf3CPrHFvpPt2VAqQnkCw3wLAtR34SucBjr/dXcjuT
arPiV8dNmXHTosdKvcodAWA+0YLLE7Bhz0nLK6eTt5L/UsfdbRN8q9Xdhd5nJjji
DjKBJBfwdG5n3r96g7dlb/XdHuQjbFBq3uLmc8H2OdWOrk5PyqeoUA5fdBQxkb8=
=vKSI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,virtio
This further optimizes MSIX handling in virtio-pci.
Also included is pci cleanup by Paolo, and pci device
assignment fix by Alex.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* mst/tags/for_anthony:
pci-assign: Enable MSIX on device to match guest
pci: use constants for devices under the 1B36 device ID, document them
ivshmem: use symbolic constant for PCI ID, add to pci-ids.txt
virtio-9p: use symbolic constant, add to pci-ids.txt
reorganize pci-ids.txt
docs: move pci-ids.txt to docs/specs/
vhost: backend masking support
vhost: set started flag while start is in progress
virtio-net: set/clear vhost_started in reverse order
virtio: backend virtqueue notifier masking
virtio-pci: cache msix messages
kvm: add stub for update msi route
msix: add api to access msix message
virtio: don't waste irqfds on control vqs
Coverity worries the strcpy() could overrun the destination. It
can't, because the source always points to usb_host_scan()'s auto
port[], which has the same size. Use pstrcpy() anyway, to hush the
checker.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity points out that port is later passed to usb_host_open(),
which dereferences it. It actually can't be null: it always points to
usb_host_scan()'s auto port[]. Drop the superfluous port == NULL
test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity worries the EHCIQueue pointer could be null when we pass it
to functions that reference it. The state machine ensures it can't be
null then. Assert that, to hush the checker.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
O_DIRECT on Linux has alignment requirements on I/O buffers and
misaligned requests result in -EINVAL. The Linux virtio_blk guest
driver usually submits aligned requests so I forgot to handle misaligned
requests.
It turns out that virtio-win guest drivers submit misaligned requests.
Handle them using a bounce buffer that meets alignment requirements.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extract code for read/write command processing into do_rdwr_cmd(). This
brings together pieces that are spread across process_request().
The real motivation is to set the stage for handling misaligned
requests, which the next patch tackles.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
interface_set_client_capabilities() copies only the first few bits,
because it falls into a Classic C trap: you can declare a parameter
uint8_t caps[58], but the resulting parameter type is uint8_t *, not
uint8_t[58]. In particular, sizeof(caps) is sizeof(uint8_t *), not
the intended sizeof(uint8_t[58]).
Harmless, because the bits aren't used, yet. Broken in commit
c10018d6. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pointer arithmetic there is safe, but ugly. Coverity grouses
about it. However, the actual comparison is off by one: <= end
instead of < end. Fix by rewriting the check in a cleaner way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).
Consolidate these variables in a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (31 commits)
PPC: linux-user: Calculate context pointer explicitly
target-ppc: Error out for -cpu host on unknown PVR
target-ppc: Slim conversion of model definitions to QOM subclasses
PPC: Bring EPR support closer to reality
PPC: KVM: set has-idle in guest device tree
kvm: Update kernel headers
openpic: fix CTPR and de-assertion of interrupts
openpic: move IACK to its own function
openpic: IRQ_check: search the queue a word at a time
openpic: fix sense and priority bits
openpic: add some bounds checking for IRQ numbers
openpic: use standard bitmap operations
Revert "openpic: Accelerate pending irq search"
openpic: always call IRQ_check from IRQ_get_next
openpic/fsl: critical interrupts ignore mask before v4.1
openpic: make ctpr signed
openpic: rework critical interrupt support
openpic: make register names correspond better with hw docs
ppc/booke: fix crit/mcheck/debug exceptions
openpic: lower interrupt when reading the MSI register
...
The commit c02e1eac88 broke the compilation
for i386. ULL need to be specify for uint64_t value.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* stefanha/trivial-patches:
hw/pc.c: Fix converting of ioport_register* to MemoryRegion
Replace remaining gmtime, localtime by gmtime_r, localtime_r
savevm: Remove MinGW specific code which is no longer needed
qga/channel-posix.c: Explicitly include string.h
configure: Fix comment (copy+paste bug)
readline: avoid memcpy() of overlapping regions
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
