msr_pow macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-10-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ce macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-9-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ee macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-8-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ile macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-7-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ds macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-6-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_le macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-5-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some msr_* macros are not used anywhere. Remove them as part of
the work to remove all hidden usage of *env.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
fpscr_* defined macros are hiding the usage of *env behind them.
Substitute the usage of these macros with `env->fpscr & FP_*` to make
the code cleaner.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Per E500 core reference manual [1], chapter 8.4.4 "Branch Taken Debug
Event" and chapter 8.4.5 "Instruction Complete Debug Event":
"A branch taken debug event occurs if both MSR[DE] and DBCR0[BRT]
are set ... Branch taken debug events are not recognized if MSR[DE]
is cleared when the branch instruction executes."
"An instruction complete debug event occurs when any instruction
completes execution so long as MSR[DE] and DBCR0[ICMP] are both
set ... Instruction complete debug events are not recognized if
MSR[DE] is cleared at the time of the instruction execution."
Current codes do not check MSR.DE bit before setting HFLAGS_SE and
HFLAGS_BE flag, which would cause the immediate debug interrupt to
be generated, e.g.: when DBCR0.ICMP bit is set by guest software
and MSR.DE is not set.
[1] https://www.nxp.com/docs/en/reference-manual/E500CORERM.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220421011729.1148727-1-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Init the struct to avoid Valgrind complaints about unitialized bytes,
such as this one:
==39549== Syscall param ioctl(generic) points to uninitialised byte(s)
==39549== at 0x55864E4: ioctl (in /usr/lib64/libc.so.6)
==39549== by 0xD1F7EF: kvm_vm_ioctl (kvm-all.c:3035)
==39549== by 0xAF8F5B: kvm_get_radix_page_info (kvm.c:276)
==39549== by 0xB00533: kvmppc_host_cpu_class_init (kvm.c:2369)
==39549== by 0xD3DCE7: type_initialize (object.c:366)
==39549== by 0xD3FACF: object_class_foreach_tramp (object.c:1071)
==39549== by 0x502757B: g_hash_table_foreach (in /usr/lib64/libglib-2.0.so.0.7000.5)
==39549== by 0xD3FC1B: object_class_foreach (object.c:1093)
==39549== by 0xB0141F: kvm_ppc_register_host_cpu_type (kvm.c:2613)
==39549== by 0xAF87E7: kvm_arch_init (kvm.c:157)
==39549== by 0xD1E2A7: kvm_init (kvm-all.c:2595)
==39549== by 0x8E6E93: accel_init_machine (accel-softmmu.c:39)
==39549== Address 0x1fff00e208 is on thread 1's stack
==39549== in frame #2, created by kvm_get_radix_page_info (kvm.c:267)
==39549== Uninitialised value was created by a stack allocation
==39549== at 0xAF8EE8: kvm_get_radix_page_info (kvm.c:267)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220331001717.616938-5-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Init 'sregs' to avoid Valgrind complaints about uninitialized bytes
from kvmppc_put_books_sregs():
==54059== Thread 3:
==54059== Syscall param ioctl(generic) points to uninitialised byte(s)
==54059== at 0x55864E4: ioctl (in /usr/lib64/libc.so.6)
==54059== by 0xD1FA23: kvm_vcpu_ioctl (kvm-all.c:3053)
==54059== by 0xAFB18B: kvmppc_put_books_sregs (kvm.c:891)
==54059== by 0xAFB47B: kvm_arch_put_registers (kvm.c:949)
==54059== by 0xD1EDA7: do_kvm_cpu_synchronize_post_init (kvm-all.c:2766)
==54059== by 0x481AF3: process_queued_cpu_work (cpus-common.c:343)
==54059== by 0x4EF247: qemu_wait_io_event_common (cpus.c:412)
==54059== by 0x4EF343: qemu_wait_io_event (cpus.c:436)
==54059== by 0xD21E83: kvm_vcpu_thread_fn (kvm-accel-ops.c:54)
==54059== by 0xFFEBF3: qemu_thread_start (qemu-thread-posix.c:556)
==54059== by 0x54E6DC3: start_thread (in /usr/lib64/libc.so.6)
==54059== by 0x5596C9F: clone (in /usr/lib64/libc.so.6)
==54059== Address 0x799d1cc is on thread 3's stack
==54059== in frame #2, created by kvmppc_put_books_sregs (kvm.c:851)
==54059== Uninitialised value was created by a stack allocation
==54059== at 0xAFAEB0: kvmppc_put_books_sregs (kvm.c:851)
This happens because Valgrind does not consider the 'sregs'
initialization done by kvm_vcpu_ioctl() at the end of the function.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220331001717.616938-4-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'lpcr' is used as an input of kvm_get_one_reg(). Valgrind doesn't
understand that and it returns warnings as such for this function:
==55240== Thread 1:
==55240== Conditional jump or move depends on uninitialised value(s)
==55240== at 0xB011E4: kvmppc_enable_cap_large_decr (kvm.c:2546)
==55240== by 0x92F28F: cap_large_decr_cpu_apply (spapr_caps.c:523)
==55240== by 0x930C37: spapr_caps_cpu_apply (spapr_caps.c:921)
==55240== by 0x955D3B: spapr_reset_vcpu (spapr_cpu_core.c:73)
==55240== by 0x95612B: spapr_cpu_core_reset (spapr_cpu_core.c:209)
==55240== by 0x95619B: spapr_cpu_core_reset_handler (spapr_cpu_core.c:218)
==55240== by 0xD3605F: qemu_devices_reset (reset.c:69)
==55240== by 0x92112B: spapr_machine_reset (spapr.c:1641)
==55240== by 0x4FBD63: qemu_system_reset (runstate.c:444)
==55240== by 0x62812B: qdev_machine_creation_done (machine.c:1247)
==55240== by 0x5064C3: qemu_machine_creation_done (vl.c:2725)
==55240== by 0x5065DF: qmp_x_exit_preconfig (vl.c:2748)
==55240== Uninitialised value was created by a stack allocation
==55240== at 0xB01158: kvmppc_enable_cap_large_decr (kvm.c:2540)
Init 'lpcr' to avoid this warning.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220331001717.616938-3-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Valgrind isn't convinced that we are initializing the values we assign
to env->spr[spr] because it doesn't understand that the 'val' union is
being written by the kvm_vcpu_ioctl() that follows (via struct
kvm_one_reg).
This results in Valgrind complaining about uninitialized values every
time we use env->spr in a conditional, like this instance:
==707578== Thread 1:
==707578== Conditional jump or move depends on uninitialised value(s)
==707578== at 0xA10A40: hreg_compute_hflags_value (helper_regs.c:106)
==707578== by 0xA10C9F: hreg_compute_hflags (helper_regs.c:173)
==707578== by 0xA110F7: hreg_store_msr (helper_regs.c:262)
==707578== by 0xA051A3: ppc_cpu_reset (cpu_init.c:7168)
==707578== by 0xD4730F: device_transitional_reset (qdev.c:799)
==707578== by 0xD4A11B: resettable_phase_hold (resettable.c:182)
==707578== by 0xD49A77: resettable_assert_reset (resettable.c:60)
==707578== by 0xD4994B: resettable_reset (resettable.c:45)
==707578== by 0xD458BB: device_cold_reset (qdev.c:296)
==707578== by 0x48FBC7: cpu_reset (cpu-common.c:114)
==707578== by 0x97B5EB: spapr_reset_vcpu (spapr_cpu_core.c:38)
==707578== by 0x97BABB: spapr_cpu_core_reset (spapr_cpu_core.c:209)
==707578== Uninitialised value was created by a stack allocation
==707578== at 0xB11F08: kvm_get_one_spr (kvm.c:543)
Initializing 'val' has no impact in the logic and makes Valgrind output
more bearable.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220331001717.616938-2-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
This patch adds tcg accessors for 2 SPRs which were missing on P10:
- the TBU40 register is used to write the upper 40 bits of the
timebase register. It is used by kvm to update the timebase when
entering/exiting the guest on P9 and above. The missing definition was
causing erratic decrementer interrupts in a pseries/kvm guest running
in a powernv10/tcg host, typically resulting in hangs.
- the missing DPDES SPR was found through code inspection. It exists
unchanged on P10.
Both existed on previous versions of the processor and a bit of git
archaeology hints that they were added while the P10 model was already
being worked on so they may have simply fallen through the cracks.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220411125900.352028-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
xscvqpsqz: VSX Scalar Convert with round to zero Quad-Precision to
Signed Quadword
xscvqpuqz: VSX Scalar Convert with round to zero Quad-Precision to
Unsigned Quadword
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
xscvsqqp: VSX Scalar Convert with round Signed Quadword to
Quad-Precision
xscvuqqp: VSX Scalar Convert with round Unsigned Quadword to
Quad-Precision format
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the xsmadd* insns were moved to decodetree, the helper arguments
were reordered to better match the PowerISA description. The same macro
is used to declare xvmadd* helpers, but the translation macro of these
insns was not changed accordingly.
Reported-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Fixes: e4318ab2e4 ("target/ppc: move xs[n]madd[am][ds]p/xs[n]msub[am][ds]p to decodetree")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220325111851.718966-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Power ISA v3.1 formalizes the previously undefined result in
words 1 and 3 to be a copy of the result in words 0 and 2.
This affects: xvcvsxdsp, xvcvuxdsp, xvcvdpsp.
And the previously undefined result in word 1 to be a copy of
the result in word 0.
This affects: xscvdpsp.
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220316200427.3410437-1-lucas.coutinho@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Power ISA v3.1 formalizes the previously undefined result in
words 1 and 3 to be a copy of the result in words 0 and 2.
This affects: xscvdpsxws, xscvdpuxws, xvcvdpsxws, xvcvdpuxws.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/852
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315053934.377519-1-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fix a typo in the host endianness macro and add a simple test to detect
regressions.
Fixes: 9bb0048ec6 ("target/ppc: convert xxspltw to vector operations")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220310172047.61094-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fix Instruction Storage Interrupt (ISI) fault cause for Radix MMU,
when caused by missing PAGE_EXEC permission, to be
SRR1_NOEXEC_GUARD instead of DSISR_PROTFAULT.
This matches POWER9 hardware behavior.
Fixes: d5fee0bbe6 ("target/ppc: Implement ISA V3.00 radix page fault handler")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Message-Id: <20220309192756.145283-1-leandro.lupori@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
Some ISA v2.03 Vector Multiply instructions marked to be ISA v2.07 only.
This patch fixes it.
Fixes: 80eca687c8 ("target/ppc: moved vector even and odd multiplication to decodetree")
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220304175156.2012315-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Change VSX Scalar Multiply-Add/Subtract Type-A/M Single Precision
helpers to use float64r32_muladd. This method should correctly handle
all rounding modes, so the workaround for float_round_nearest_even can
be dropped.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Refactor VSX_SCALAR_CMP_DP, changing its name to VSX_SCALAR_CMP and
prepare the helper to be used for quadword comparisons.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-41-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
xscmpnedp was added in ISA v3.0 but removed in v3.0B. This patch
removes this instruction as it was not in the final version of v3.0.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-40-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Implement the following PowerISA v3.1 instructions:
vcmpgtsq: Vector Compare Greater Than Signed Quadword
vcmpgtuq: Vector Compare Greater Than Unsigned Quadword
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-13-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move the following instructions to decodetree:
vextsb2w: Vector Extend Sign Byte To Word
vextsh2w: Vector Extend Sign Halfword To Word
vextsb2d: Vector Extend Sign Byte To Doubleword
vextsh2d: Vector Extend Sign Halfword To Doubleword
vextsw2d: Vector Extend Sign Word To Doubleword
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Based on [1] by Lijun Pan <ljp@linux.ibm.com>, which was never merged
into master.
[1]: https://lists.gnu.org/archive/html/qemu-ppc/2020-07/msg00419.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Based on [1] by Lijun Pan <ljp@linux.ibm.com>, which was never merged
into master.
[1]: https://lists.gnu.org/archive/html/qemu-ppc/2020-07/msg00419.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Changed vmulhuw, vmulhud, vmulhsw, vmulhsd to not
use helpers.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
New macros that add FLAGS and FLAGS2 checking were added for
both TRANS and TRANS64.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
[ferst: - TRANS_FLAGS2 instead of TRANS_FLAGS_E
- Use the new macros in load/store vector insns ]
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.
fire_PMC_interrupt() will execute the raise_ebb_perfm_exception() helper
which will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits
are set, do_ebb() will attempt to trigger a PERFM EBB event.
If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225101140.1054160-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PPC_INTERRUPT_EBB is a new interrupt that will be used to deliver EBB
exceptions that had to be postponed because the thread wasn't in problem
state at the time the event-based branch was supposed to occur.
ISA 3.1 also defines two EBB exceptions: Performance Monitor EBB
exception and External EBB exception. They are being added as
POWERPC_EXCP_PERFM_EBB and POWERPC_EXCP_EXTERNAL_EBB.
PPC_INTERRUPT_EBB will check BESCR bits to see the EBB type that
occurred and trigger the appropriate exception. Both exceptions are
doing the same thing in this first implementation: clear BESCR_GE and
enter the branch with env->nip retrieved from SPR_EBBHR.
The checks being done by the interrupt code are msr_pr and BESCR_GE
states. All other checks (EBB facility check, BESCR_PME bit, specific
bits related to the event type) must be done beforehand.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are still PMU exclusive bits to handle in fire_PMC_interrupt()
before implementing the EBB support. Let's finalize it now to avoid
dealing with PMU and EBB logic at the same time in the next patches.
fire_PMC_interrupt() will fire an Performance Monitor alert depending on
MMCR0_PMAE. If we are required to freeze the timers (MMCR0_FCECE) we'll
also need to update summaries and delete the existing overflow timers.
In all cases we're going to update the cycle counters.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is an exclusive TCG helper. Gating it with CONFIG_TCG and changing
meson.build accordingly will prevent problems --disable-tcg and
--disable-linux-user later on.
We're also changing the uses of !kvm_enabled() to tcg_enabled() to avoid
adding "defined(CONFIG_TCG)" ifdefs, since tcg_enabled() will be
defaulted to false with --disable-tcg and the block will always be
skipped.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The dh_alias redirect is intended to handle TCG types as distinguished
from C types. TCG does not distinguish signed int from unsigned int,
because they are the same size. However, we need to retain this
distinction for dh_typecode, lest we fail to extend abi types properly
for the host call parameters.
This bug was detected when running the 'arm' emulator on an s390
system. The s390 uses TCG_TARGET_EXTEND_ARGS which triggers code
in tcg_gen_callN to extend 32 bit values to 64 bits; the incorrect
sign data in the typemask for each argument caused the values to be
extended as unsigned values.
This simple program exhibits the problem:
static volatile int num = -9;
static volatile int den = -5;
int main(void)
{
int quo = num / den;
printf("num %d den %d quo %d\n", num, den, quo);
exit(0);
}
When run on the broken qemu, this results in:
num -9 den -5 quo 0
The correct result is:
num -9 den -5 quo 1
Fixes: 7319d83a73 ("tcg: Combine dh_is_64bit and dh_is_signed to dh_typecode")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/876
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's leave cpu_init with just generic CPU initialization and
QOM-related functions.
The rest of the SPR registration functions will be moved in the
following patches along with the code that uses them. These are only
the commonly used ones.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-28-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These will need to be accessed from other files once we move the CPUs
code to separate files.
The check_pow_hid0 and check_pow_hid0_74xx are too specific to be
moved to a header so I'll deal with them later when splitting this
code between the multiple CPU families.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-27-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Put the SPR registration macros in a header that is accessible outside
of cpu_init.c. The following patches will move CPU-specific code to
separate files and will need to access it.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-26-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The following patches will move CPU-specific code into separate files,
so expose the most used SPR registration functions:
register_sdr1_sprs | 22 callers
register_low_BATs | 20 callers
register_non_embedded_sprs | 19 callers
register_high_BATs | 10 callers
register_thrm_sprs | 8 callers
register_usprgh_sprs | 6 callers
register_6xx_7xx_soft_tlb | only 3 callers, but it helps to
keep the soft TLB code consistent.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-25-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Initial intent for the spr_tcg header was to expose the spr_read|write
callbacks that are only used by TCG code. However, although these
routines are TCG-specific, the KVM code needs access to env->sprs
which creation is currently coupled to the callback registration.
We are probably not going to decouple SPR creation and TCG callback
registration any time soon, so let's rename the header to spr_common
to accomodate the register_*_sprs functions that will be moved out of
cpu_init.c in the following patches.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-24-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This function registers just one SPR and has only two callers, so open
code it.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-23-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The important part of this function is that it applies to non-embedded
CPUs, not that it also applies to the 601. We removed support for the
601 anyway, so rename this function.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-22-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The init_proc_755 function is identical to the 745 one except for the
755-specific registers. I think it is worth it to make them share
code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-21-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
init_proc_603 is defined after init_proc_e300, so I had to move some
code around to make it work.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-19-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is done to improve init_proc readability and to make subsequent
patches that touch this code a bit cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-18-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is done to improve init_proc readability and to make subsequent
patches that touch this code a bit cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-17-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is just to have 755-specific registers contained into a function,
intead of leaving them open-coded in init_proc_755. It makes init_proc
easier to read and keeps later patches that touch this code a bit
cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-16-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 745 and 755 can share the HID registration, so move it all into
register_755_sprs, which applies for both CPUs.
Also rename that function to register_745_sprs, since the 745 is the
earliest of the two. This will help with separating 755-specific
registers in a subsequent patch.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move some of the 440 registers that are being repeated in the 440*
CPUs to register_440_sprs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be from different CPU families, so
duplicate some code to keep them separate.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be in different CPU families (6xx and
7xx), so keep their SPR registration separate.
The code was copied into register_G2_sprs and the common function was
renamed to apply only to the 755.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure that every register_*_sprs function only has calls to
spr_register* to register individual SPRs. Do not allow nesting. This
makes the code easier to follow and a look at init_proc_* should
suffice to know what SPRs a CPU has.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that the 601 was removed, all of our CPUs have a timebase, so that
can be moved into the common function.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The top level init_proc calls register_generic_sprs but also registers
some other SPRs outside of that function. Let's group everything into
a single place.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The G2LE CPU initialization code is the same as the G2. Use the latter
for both.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The /* XXX : not implemented */ comments all over cpu_init are
confusing and ambiguous.
Do they mean not implemented by QEMU, not implemented in a specific
access mode? Not implemented by the CPU? Do they apply to just the
register right after or to a whole block? Do they mean we have an
action to take in the future to implement these? Are they only
informative?
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce virtual hypervisor methods that can support a "Nested KVM HV"
implementation using the bare metal 2-level radix MMU, and using HV
exceptions to return from H_ENTER_NESTED (rather than cause interrupts).
HV exceptions can now be raised in the TCG spapr machine when running a
nested KVM HV guest. The main ones are the lev==1 syscall, the hdecr,
hdsi and hisi, hv fu, and hv emu, and h_virt external interrupts.
HV exceptions are intercepted in the exception handler code and instead
of causing interrupts in the guest and switching the machine to HV mode,
they go to the vhyp where it may exit the H_ENTER_NESTED hcall with the
interrupt vector numer as return value as required by the hcall API.
Address translation is provided by the 2-level page table walker that is
implemented for the bare metal radix MMU. The partition scope page table
is pointed to the L1's partition scope by the get_pate vhc method.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220216102545.1808018-9-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This moves the logic to reset the QEMU exception state into its own
function.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-8-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The virtual hypervisor currently always intercepts and handles
hypercalls but with a future change this will not always be the case.
Add a helper for the test so the logic is abstracted from the mechanism.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-7-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In prepartion for implementing a full partition table option for
vhyp, update the get_pate method to take an lpid and return a
success/fail indicator.
The spapr implementation currently just asserts lpid is always 0
and always return success.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-6-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The radix on vhyp MMU uses a single-level radix table walk, with the
partition scope mapping provided by the flat QEMU machine memory.
A subsequent change will use the two-level radix walk on vhyp in some
situations, so provide a helper which can abstract that logic.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-5-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Invalid or missing partition table entry exceptions should cause HV
interrupts. HDSISR is set to bad MMU config, which is consistent with
the ISA and experimentally matches what POWER9 generates.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-2-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v3.1 changed some VSX instructions behavior by changing what the
other words/doubleword in the result should contain when the result is
only one word/doubleword. e.g. xsmaxdp operates on doubleword 0 and
saves the result also in doubleword 0.
Before, the second doubleword result was undefined according to the
ISA, but now it's stated that it should be zeroed.
Even tough the result was undefined before, hardware implementing these
instructions already filled these fields with 0s. Changing every ISA
version in QEMU to this behavior makes the results match what happens
in hardware.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204181944.65063-1-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't really need to check for exception model while applying
AIL. We can check the lpcr_mask for the presence of
LPCR_AIL/LPCR_HAIL.
This removes one more instance of passing the exception model ID
around.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We currently abort QEMU during the dispatch of an interrupt if we try
to set MSR_HV without having MSR_HVB in the msr_mask. I think we
should verify this for all MSR bits. There is no reason to ever have a
MSR bit set if the corresponding bit is not set in that CPU's
msr_mask.
Note that this is not about the emulated code setting reserved
bits. We clear the new_msr when starting to dispatch an exception, so
if we end up with bits not present in the msr_mask that is a QEMU
programming error.
I kept the HSRR verification for BookS because it is the only CPU
family that has HSRRs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make the cpu-specific powerpc_excp_* functions a bit simpler by moving
the bounds check and logging to powerpc_excp.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that all CPU families have their own separate exception
dispatching code we can remove powerpc_excp_legacy.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 7xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 7xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Thre is no HV support in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no ESR in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no MSR_HV in the 7xx so remove the LPES0 handling.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in the 7xx.
Also remove 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DLTLB
POWERPC_EXCP_DSI
POWERPC_EXCP_DSTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_IFTLB
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 7xx CPUs
(740, 745, 750, 750cl, 750cx, 750fx, 750gx, 755). This commit copies
powerpc_excp_legacy verbatim so the next one has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since we've split the exception code by exception model, the exception
model IDs are becoming less useful. These two can be merged.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 6xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 6xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no HV support in the 6xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no Hypervisor mode in the 6xx CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no ESR in the 6xx CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
