Two new regs added: ztso and zacas.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709085431.455541-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Base on the riscv-privileged spec, vstvec substitutes for the usual stvec.
Therefore, the encoding of the MODE should also be restricted to 0 and 1.
Signed-off-by: Jiayi Li <lijiayi@eswincomputing.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240701022553.1982-1-lijiayi@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-11-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-10-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-9-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-8-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-7-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zama16b is the property that misaligned load/stores/atomics within
a naturally aligned 16-byte region are atomic.
According to the specification, Zama16b applies only to AMOs, loads
and stores defined in the base ISAs, and loads and stores of no more
than XLEN bits defined in the F, D, and Q extensions. Thus it should
not apply to zacas or RVC instructions.
For an instruction in that set, if all accessed bytes lie within 16B granule,
the instruction will not raise an exception for reasons of address alignment,
and the instruction will give rise to only one memory operation for the
purposes of RVWMO—i.e., it will execute atomically.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240709113652.1239-6-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zcmop defines eight 16-bit MOP instructions named C.MOP.n, where n is
an odd integer between 1 and 15, inclusive. C.MOP.n is encoded in
the reserved encoding space corresponding to C.LUI xn, 0.
Unlike the MOPs defined in the Zimop extension, the C.MOP.n instructions
are defined to not write any register.
In current implementation, C.MOP.n only has an check function, without any
other more behavior.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zimop extension defines an encoding space for 40 MOPs.The Zimop
extension defines 32 MOP instructions named MOP.R.n, where n is
an integer between 0 and 31, inclusive. The Zimop extension
additionally defines 8 MOP instructions named MOP.RR.n, where n
is an integer between 0 and 7.
These 40 MOPs initially are defined to simply write zero to x[rd],
but are designed to be redefined by later extensions to perform some
other action.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Message-ID: <20240709113652.1239-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the superfluous trailing semicolon in target/hexagon/imported/mmvec/
ext.idef.
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCGCPUOps::cpu_exec_interrupt hook is currently not mandatory; if
it is left NULL then we treat it as if it had returned false. However
since pretty much every architecture needs to handle interrupts,
almost every target we have provides the hook. The one exception is
Tricore, which doesn't currently implement the architectural
interrupt handling.
Add a "do nothing" implementation of cpu_exec_hook for Tricore,
assert on startup that the CPU does provide the hook, and remove
the runtime NULL check before calling it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240712113949.4146855-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is how the steps are ordered in the manual. EFLAGS.NT is
overwritten after the fact in the saved image.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This takes care of probing the vaddr range in advance, and is also faster
because it avoids repeated TLB lookups. It also matches the Intel manual
better, as it says "Checks that the current (old) TSS, new TSS, and all
segment descriptors used in the task switch are paged into system memory";
note however that it's not clear how the processor checks for segment
descriptors, and this check is not included in the AMD manual.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This step is listed in the Intel manual: "Checks that the new task is available
(call, jump, exception, or interrupt) or busy (IRET return)".
The AMD manual lists the same operation under the "Preventing recursion"
paragraph of "12.3.4 Nesting Tasks", though it is not clear if the processor
checks the busy bit in the IRET case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the MMU index to the StackAccess struct, so that it can be cached
or (in the next patch) computed from information that is not in
CPUX86State.
Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupts and call gates should use accesses with the DPL as
the privilege level. While computing the applicable MMU index
is easy, the harder thing is how to plumb it in the code.
One possibility could be to add a single argument to the PUSH* macros
for the privilege level, but this is repetitive and risks confusion
between the involved privilege levels.
Another possibility is to pass both CPL and DPL, and adjusting both
PUSH* and POP* to use specific privilege levels (instead of using
cpu_{ld,st}*_data). This makes the code more symmetric.
However, a more complicated but much nicer approach is to use a structure
to contain the stack parameters, env, unwind return address, and rewrite
the macros into functions. The struct provides an easy home for the MMU
index as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-4-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not pre-decrement esp, let the macros subtract the appropriate
operand size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a bug wherein i386/tcg assumed an interrupt return using
the IRET instruction was always returning from kernel mode to either
kernel mode or user mode. This assumption is violated when IRET is used
as a clever way to restore thread state, as for example in the dotnet
runtime. There, IRET returns from user mode to user mode.
This bug is that stack accesses from IRET and RETF, as well as accesses
to the parameters in a call gate, are normal data accesses using the
current CPL. This manifested itself as a page fault in the guest Linux
kernel due to SMAP preventing the access.
This bug appears to have been in QEMU since the beginning.
Analyzed-by: Robert R. Henry <rrh.henry@gmail.com>
Co-developed-by: Robert R. Henry <rrh.henry@gmail.com>
Signed-off-by: Robert R. Henry <rrh.henry@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This truncation is now handled by MMU_*32_IDX. The introduction of
MMU_*32_IDX in fact applied correct 32-bit wraparound to 16-bit accesses
with a high segment base (e.g. big real mode or vm86 mode), which did
not use SEG_ADDL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In long mode, POP to memory will write a full 64-bit value. However,
the call to gen_writeback() in gen_POP will use MO_32 because the
decoding table is incorrect.
The bug was latent until commit aea49fbb01 ("target/i386: use gen_writeback()
within gen_POP()", 2024-06-08), and then became visible because gen_op_st_v
now receives op->ot instead of the "ot" returned by gen_pop_T0.
Analyzed-by: Clément Chigot <chigot@adacore.com>
Fixes: 5e9e21bcc4 ("target/i386: move 60-BF opcodes to new decoder", 2024-05-07)
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently if the 'legacy-vm-type' property of the sev-guest object is
'on', QEMU will attempt to use the newer KVM_SEV_INIT2 kernel
interface in conjunction with the newer KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM KVM VM types.
This can lead to measurement changes if, for instance, an SEV guest was
created on a host that originally had an older kernel that didn't
support KVM_SEV_INIT2, but is booted on the same host later on after the
host kernel was upgraded.
Instead, if legacy-vm-type is 'off', QEMU should fail if the
KVM_SEV_INIT2 interface is not provided by the current host kernel.
Modify the fallback handling accordingly.
In the future, VMSA features and other flags might be added to QEMU
which will require legacy-vm-type to be 'off' because they will rely
on the newer KVM_SEV_INIT2 interface. It may be difficult to convey to
users what values of legacy-vm-type are compatible with which
features/options, so as part of this rework, switch legacy-vm-type to a
tri-state OnOffAuto option. 'auto' in this case will automatically
switch to using the newer KVM_SEV_INIT2, but only if it is required to
make use of new VMSA features or other options only available via
KVM_SEV_INIT2.
Defining 'auto' in this way would avoid inadvertantly breaking
compatibility with older kernels since it would only be used in cases
where users opt into newer features that are only available via
KVM_SEV_INIT2 and newer kernels, and provide better default behavior
than the legacy-vm-type=off behavior that was previously in place, so
make it the default for 9.1+ machine types.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
cc: kvm@vger.kernel.org
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240710041005.83720-1-michael.roth@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We set the value of register CSR_PRCFG3, but left out CSR_PRCFG1
and CSR_PRCFG2. Set CSR_PRCFG1 and CSR_PRCFG2 according to the
default values of the physical machine.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240705021839.1004374-1-gaosong@loongson.cn>
Since srai.w is a valid instruction on la32, remove the avail_64 check
and simplify trans_srai_w().
Fixes: c0c0461e3a ("target/loongarch: Add avail_64 to check la64-only instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Feiyang Chen <chris.chenfeiyang@gmail.com>
Message-Id: <20240628033357.50027-1-chris.chenfeiyang@gmail.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
With KVM virtualization, debug exception is injected to guest kernel
rather than host for normal break intruction. Here hypercall
instruction with special code is used for sw breakpoint usage,
and detailed instruction comes from kvm kernel with user API
KVM_REG_LOONGARCH_DEBUG_INST.
Now only software breakpoint is supported, and it is allowed to
insert/remove software breakpoint. We can debug guest kernel with gdb
method after kernel is loaded, hardware breakpoint will be added in later.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240607035016.2975799-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240709000610.382391-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the TCGCPUOps::cpu_exec_halt method is optional, and if it
is not set then the default is to call the CPUClass::has_work
method (which has an identical function signature).
We would like to make the cpu_exec_halt method mandatory so we can
remove the runtime check and fallback handling. In preparation for
that, make all the targets which don't need special handling in their
cpu_exec_halt set it to their cpu_has_work implementation instead of
leaving it unset. (This is every target except for arm and i386.)
In the riscv case this requires us to make the function not
be local to the source file it's defined in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In commit a96edb687e we set the cpu_exec_halt field of the
TCGCPUOps arm_tcg_ops to arm_cpu_exec_halt(), but we left the
arm_v7m_tcg_ops struct unchanged. That isn't wrong, because for
M-profile FEAT_WFxT doesn't exist and the default handling for "no
cpu_exec_halt method" is correct, but it's perhaps a little
confusing. We would also like to make setting the cpu_exec_halt
method mandatory.
Initialize arm_v7m_tcg_ops cpu_exec_halt to the same function we use
for A-profile. (On M-profile we never set up the wfxt timer so there
is no change in behaviour here.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In a completely artifical memset benchmark object_dynamic_cast_assert
dominates the profile, even above guest address resolution and
the underlying host memset.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240702154911.1667418-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to allow FPCR bits that aren't in the FPSCR (like the new
bits that are defined for FEAT_AFP), we need to make sure that writes
to the FPSCR only write to the bits of FPCR that are architecturally
mapped, and not the others.
Implement this with a new function vfp_set_fpcr_masked() which
takes a mask of which bits to update.
(We could do the same for FPSR, but we leave that until we actually
are likely to need it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-10-peter.maydell@linaro.org
Now that we store FPSR and FPCR separately, the FPSR_MASK and
FPCR_MASK macros are slightly confusingly named and the comment
describing them is out of date. Rename them to FPSCR_FPSR_MASK and
FPSCR_FPCR_MASK, document that they are the mask of which FPSCR bits
are architecturally mapped to which AArch64 register, and define them
symbolically rather than as hex values. (This latter requires
defining some extra macros for bits which we haven't previously
defined.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-9-peter.maydell@linaro.org
The QC, N, Z, C, V bits live in the FPSR, not the FPCR. Rename the
macros that define these bits accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-8-peter.maydell@linaro.org
Now that we have refactored the set/get functions so that the FPSCR
format is no longer the authoritative one, we can keep FPSR and FPCR
in separate CPU state fields.
As well as the get and set functions, we also have a scattering of
places in the code which directly access vfp.xregs[ARM_VFP_FPSCR] to
extract single fields which are stored there. These all change to
directly access either vfp.fpsr or vfp.fpcr, depending on the
location of the field. (Most commonly, this is the NZCV flags.)
We make the field in the CPU state struct 64 bits, because
architecturally FPSR and FPCR are 64 bits. However we leave the
types of the arguments and return values of the get/set functions as
32 bits, since we don't need to make that change with the current
architecture and various callsites would be unable to handle
set bits in the high half (for instance the gdbstub protocol
assumes they're only 32 bit registers).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-7-peter.maydell@linaro.org
We already have a load_cpu_field_low32() to load the low half of a
64-bit CPU struct field to a TCGv_i32; however we haven't yet needed
the store equivalent. We'll want that in the next patch, so
implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-6-peter.maydell@linaro.org
To support FPSR and FPCR bits that don't exist in the AArch32 FPSCR
view of floating point control and status (such as the FEAT_AFP ones),
we need to make sure those bits can be migrated. This commit allows
that, whilst maintaining backwards and forwards migration compatibility
for CPUs where there are no such bits:
On sending:
* If either the FPCR or the FPSR include set bits that are not
visible in the AArch32 FPSCR view of floating point control/status
then we send the FPCR and FPSR as two separate fields in a new
cpu/vfp/fpcr_fpsr subsection, and we send a 0 for the old
FPSCR field in cpu/vfp
* Otherwise, we don't send the fpcr_fpsr subsection, and we send
an FPSCR-format value in cpu/vfp as we did previously
On receiving:
* if we see a non-zero FPSCR field, that is the right information
* if we see a fpcr_fpsr subsection then that has the information
* if we see neither, then FPSCR/FPCR/FPSR are all zero on the source;
cpu_pre_load() ensures the CPU state defaults to that
* if we see both, then the migration source is buggy or malicious;
either the fpcr_fpsr or the FPSCR will "win" depending which
is first in the migration stream; we don't care which that is
We make the new FPCR and FPSR on-the-wire data be 64 bits, because
architecturally these registers are that wide, and this avoids the
need to engage in further migration-compatibility contortions in
future if some new architecture revision defines bits in the high
half of either register.
(We won't ever send the new migration subsection until we add support
for a CPU feature which enables setting overlapping FPCR bits, like
FEAT_AFP.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-5-peter.maydell@linaro.org
Make vfp_set_fpscr() call vfp_set_fpsr() and vfp_set_fpcr()
instead of the other way around.
The masking we do when getting and setting vfp.xregs[ARM_VFP_FPSCR]
is a little awkward, but we are going to change where we store the
underlying FPSR and FPCR information in a later commit, so it will
go away then.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-4-peter.maydell@linaro.org
In AArch32, the floating point control and status bits are all in a
single register, FPSCR. In AArch64, these were split into separate
FPCR and FPSR registers, but the bit layouts remained the same, with
no overlaps, so that you could construct an FPSCR value by ORing FPCR
and FPSR, or equivalently could produce FPSR and FPCR by masking an
FPSCR value. For QEMU's implementation, we opted to use masking to
produce FPSR and FPCR, because we started with an AArch32
implementation of FPSCR.
The addition of the (AArch64-only) FEAT_AFP adds new bits to the FPCR
which overlap with some bits in the FPSR. This means we'll no longer
be able to consider the FPSCR-encoded value as the primary one, but
instead need to treat FPSR/FPCR as the primary encoding and construct
the FPSCR from those. (This remains possible because the FEAT_AFP
bits in FPCR don't appear in the FPSCR.)
As the first step in this refactoring, make vfp_get_fpscr() call
vfp_get_fpcr() and vfp_get_fpsr(), instead of the other way around.
Note that vfp_get_fpcsr_from_host() returns only bits in the FPSR
(for the cumulative fp exception bits), so we can simply rename
it without needing to add a new function for getting FPCR bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-3-peter.maydell@linaro.org
The M-profile FPSCR LTPSIZE is bits [18:16]; this is the same
field as A-profile FPSCR Len, not Stride. Correct the comment
in vfp_get_fpscr().
We also implemented M-profile FPSCR.QC, but forgot to delete
a TODO comment from vfp_set_fpscr(); remove it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-2-peter.maydell@linaro.org
This commit implements the stubs to handle the qIsAddressTagged,
qMemTag, and QMemTag GDB packets, allowing all GDB 'memory-tag'
subcommands to work with QEMU gdbstub on aarch64 user mode. It also
implements the get/set functions for the special GDB MTE register
'tag_ctl', used to control the MTE fault type at runtime.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-11-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-40-alex.bennee@linaro.org>
Make the MTE helpers allocation_tag_mem_probe, load_tag1, and store_tag1
available to other subsystems.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240628050850.536447-6-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-35-alex.bennee@linaro.org>
If page in 'ptr_access' is inaccessible and probe is 'true'
allocation_tag_mem_probe should not throw an exception, but currently it
does, so fix it.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240628050850.536447-5-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-34-alex.bennee@linaro.org>
Drop features that are listed as "BitMask" in the PPR and currently
not supported by AMD processors. The only ones that may become useful
in the future are TSC deadline timer and x2APIC, everything else is
not needed for SEV-SNP guests (e.g. VIRT_SSBD) or would require
processor support (e.g. TSC_ADJUST).
This allows running SEV-SNP guests with "-cpu host".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some CPUID features may be provided by KVM for some guests, independent of
processor support, for example TSC deadline or TSC adjust. If these are
not supported by the confidential computing firmware, however, the guest
will fail to start. Add support for removing unsupported features from
"-cpu host".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In e820_add_entry() the e820_table is reallocated with g_renew() to make
space for a new entry. However, fw_cfg_arch_create() just uses the
existing e820_table pointer. This leads to a use-after-free if anything
adds a new entry after fw_cfg is set up.
Shift the addition of the etc/e820 file to the machine done notifier, via
a new fw_cfg_add_e820() function.
Also make e820_table private and use an e820_get_table() accessor function
for it, which sets a flag that will trigger an assert() for any *later*
attempts to add to the table.
Make e820_add_entry() return void, as most callers don't check for error
anyway.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <a2708734f004b224f33d3b4824e9a5a262431568.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AVX-VNNI-INT16 (CPUID[EAX=7,ECX=1).EDX[10]) is supported by Clearwater
Forest processor, add it to QEMU as it does not need any specific
enablement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When management tools (e.g. libvirt) query QEMU capabilities,
they start QEMU with a minimalistic configuration and issue
various commands on monitor. One of the command issued is/might
be "query-sev-capabilities" to learn values like cbitpos or
reduced-phys-bits. But as of v9.0.0-1145-g16dcf200dc the monitor
command returns an error instead.
This creates a chicken-egg problem because in order to query
those aforementioned values QEMU needs to be started with a
'sev-guest' object. But to start QEMU with the values must be
known.
I think it's safe to assume that the default path ("/dev/sev")
provides the same data as user provided one. So fall back to it.
Fixes: 16dcf200dc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Link: https://lore.kernel.org/r/157f93712c23818be193ce785f648f0060b33dee.1719218926.git.mprivozn@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a custom path is provided to sev-guest object and opening
the path fails an error message is reported. But the error
message still mentions DEFAULT_SEV_DEVICE ("/dev/sev") instead of
the custom path.
Fixes: 16dcf200dc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/b4648905d399780063dc70851d3d6a3cd28719a5.1719218926.git.mprivozn@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d7c72735f6 ("target/i386: Add new EPYC CPU versions with updated
cache_info", 2023-05-08) ensured that AMD-defined CPU models did not
have the 'complex_indexing' bit set, but left it set in "-cpu host"
which uses the default ("legacy") cache information.
Reimplement that commit using a CPU feature, so that it can be applied
to all guests using a new machine type, independent of the CPU model.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent addition of the SUCCOR bit to kvm_arch_get_supported_cpuid()
causes the bit to be visible when "-cpu host" VMs are started on Intel
processors.
While this should in principle be harmless, it's not tidy and we don't
even know for sure that it doesn't cause any guest OS to take unexpected
paths. Since x86_cpu_get_supported_feature_word() can return different
different values depending on the guest, adjust it to hide the SUCCOR
bit if the guest has non-AMD vendor.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: John Allen <john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows modifying the bits in "-cpu max"/"-cpu host" depending on
the guest CPU vendor (which, at least by default, is the host vendor in
the case of KVM).
For example, machine check architecture differs between Intel and AMD,
and bits from AMD should be dropped when configuring the guest for
an Intel model.
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: John Allen <john.allen@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----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=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
macOS versions older than 12.0 are no longer supported.
docs/about/build-platforms.rst says:
> Support for the previous major version will be dropped 2 years after
> the new major version is released or when the vendor itself drops
> support, whichever comes first.
macOS 12.0 was released 2021:
https://www.apple.com/newsroom/2021/10/macos-monterey-is-now-available/
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240629-macos-v1-1-6e70a6b700a0@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU
since it concerns the external debug interface for JTAG, but is
mandatory in Armv8.8 implementations, hence it is reported as supported
in the ID registers.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the initialization of the debug ID registers to aa32_max_features,
which is used to set the 32-bit ID registers. This ensures that the
debug ID registers are consistently set for the max CPU in a single
place.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-3-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MLA, MLS, SQDMULH, SQRDMULH, were converted with 8db93dcd3d
and f80701cb44, and this code should have been removed then.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The inner loop, bounded by eltspersegment, must not be
larger than the outer loop, bounded by elements.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
host_cpu_realizefn() sets CPUID_EXT_MONITOR without consulting host/KVM
capabilities. This may cause problems:
- If MWAIT/MONITOR is not available on the host, advertising this
feature to the guest and executing MWAIT/MONITOR from the guest
triggers #UD and the guest doesn't boot. This is because typically
#UD takes priority over VM-Exit interception checks and KVM doesn't
emulate MONITOR/MWAIT on #UD.
- If KVM doesn't support KVM_X86_DISABLE_EXITS_MWAIT, MWAIT/MONITOR
from the guest are intercepted by KVM, which is not what cpu-pm=on
intends to do.
In these cases, MWAIT/MONITOR should not be exposed to the guest.
The logic in kvm_arch_get_supported_cpuid() to handle CPUID_EXT_MONITOR
is correct and sufficient, and we can't set CPUID_EXT_MONITOR after
x86_cpu_filter_features().
This was not an issue before commit 662175b91f ("i386: reorder call to
cpu_exec_realizefn") because the feature added in the accel-specific
realizefn could be checked against host availability and filtered out.
Additionally, it seems not a good idea to handle guest CPUID leaves in
host_cpu_realizefn(), and this patch merges host_cpu_enable_cpu_pm()
into kvm_cpu_realizefn().
Fixes: f5cc5a5c16 ("i386: split cpu accelerators from cpu.c, using AccelCPUClass")
Fixes: 662175b91f ("i386: reorder call to cpu_exec_realizefn")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This code was using both uint32_t and uint64_t for len.
Consistently use size_t instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240626194950.1725800-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not rely on finish->id_auth_uaddr, so that there are no casts from
pointer to uint64_t. They break on 32-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the "id_auth" name for the binary version of the data.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not rely on finish->id_block_uaddr, so that there are no casts from
pointer to uint64_t. They break on 32-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the "id_block" name for the binary version of the data.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle it like the other arithmetic cc_ops. This simplifies a
bit the implementation of bit test instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is the only CCOp, among those that compute ZF from one of the cc_op_*
registers, that uses cpu_cc_src. Do not make it the odd one off,
instead use cpu_cc_dst like the others.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
POPCNT was missing, and the entries were all out of order after
ADCX/ADOX/ADCOX were moved close to EFLAGS. Just use designated
initializers.
Fixes: 4885c3c495 ("target-i386: Use ctpop helper", 2017-01-10)
Fixes: cc155f1971 ("target/i386: rewrite flags writeback for ADCX/ADOX", 2024-06-11)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level. We
can invoke trigger_common_match() to check the privilege levels of the
type 3 triggers.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-4-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have implemented trigger_common_match(), which checks if the enabled
privilege levels of the trigger match CPU's current privilege level.
Remove the related code in riscv_cpu_debug_check_watchpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the watchpoints.
This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.
Only load/store bits and loaded/stored address should be further checked
in riscv_cpu_debug_check_watchpoint().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-3-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISC-V Debug specification version 0.13 [1] (also applied
to version 1.0 [2] but it has not been ratified yet), there are several
common matching conditions before firing a trigger, including the
enabled privilege levels of the trigger.
This commit adds trigger_common_match() to prepare the common matching
conditions for the type 2/3/6 triggers. For now, we just implement
trigger_priv_match() to check if the enabled privilege levels of the
trigger match CPU's current privilege level.
Remove the related code in riscv_cpu_debug_check_breakpoint() and invoke
trigger_common_match() to check the privilege levels of the type 2 and
type 6 triggers for the breakpoints.
This commit also changes the behavior of looping the triggers. In
previous implementation, if we have a type 2 trigger and
env->virt_enabled is true, we directly return false to stop the loop.
Now we keep looping all the triggers until we find a matched trigger.
Only the execution bit and the executed PC should be futher checked in
riscv_cpu_debug_check_breakpoint().
[1]: https://github.com/riscv/riscv-debug-spec/releases/tag/task_group_vote
[2]: https://github.com/riscv/riscv-debug-spec/releases/tag/1.0.0-rc1-asciidoc
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240626132247.2761286-2-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the old-fashioned extension auto-update check statements as
they are replaced by the extension implied rules.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-7-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zc extension has special implied rules that need to be handled separately.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-6-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add multi extension implied rules to enable the implied extensions of
the multi extension recursively.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add MISA extension implied rules to enable the implied extensions
of MISA recursively.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduce helpers to enable the extensions based on the implied rules.
The implied extensions are enabled recursively, so we don't have to
expand all of them manually. This also eliminates the old-fashioned
ordering requirement. For example, Zvksg implies Zvks, Zvks implies
Zvksed, etc., removing the need to check the implied rules of Zvksg
before Zvks.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240625114629.27793-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCVCPUImpliedExtsRule is created to store the implied rules.
'is_misa' flag is used to distinguish whether the rule is derived
from the MISA or other extensions.
'ext' stores the MISA bit if 'is_misa' is true. Otherwise, it stores
the offset of the extension defined in RISCVCPUConfig. 'ext' will also
serve as the key of the hash tables to look up the rule in the following
commit.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Tested-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240625114629.27793-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When icount is enabled, rather than returning the virtual CPU time, we
should return the instruction count itself. Add an instructions bool
parameter to get_ticks() to correctly return icount_get_raw() when
icount_enabled() == 1 and instruction count is queried. This will modify
the existing behavior which was returning an instructions count close to
the number of cycles (CPI ~= 1).
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20240618112649.76683-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
helper_froundnx_h function mistakenly uses single percision nanbox
check instead of the half percision one. This patch fixes the issue.
Signed-off-by: Branislav Brzak <brzakbranislav@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240608214546.226963-1-brzakbranislav@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on the priv-1.13.0, add the exception codes for Software-check and
Hardware-error.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-6-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on privileged spec 1.13, the RV32 needs to implement MEDELEGH
and HEDELEGH for exception codes 32-47 for reserving and exception codes
48-63 for custom use. Add the CSR number though the implementation is
just reading zero and writing ignore. Besides, for accessing HEDELEGH, it
should be controlled by mstateen0 'P1P13' bit.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-5-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on privilege 1.13 spec, there should be a bit56 for 'P1P13' in
mstateen0 that controls access to the hedeleg.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-4-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add macros and variables for RISC-V privilege 1.13 support.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-3-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Public the conversion function of priv_spec in cpu.h, so that tcg-cpu.c
could also use it.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606135454.119186-2-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the breakpoint belongs to the userspace then set the ret value.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606014501.20763-3-duchao@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch implements insert/remove software breakpoint process.
For RISC-V, GDB treats single-step similarly to breakpoint: add a
breakpoint at the next step address, then continue. So this also
works for single-step debugging.
Implement kvm_arch_update_guest_debug(): Set the control flag
when there are active breakpoints. This will help KVM to know
the status in the userspace.
Add some stubs which are necessary for building, and will be
implemented later.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240606014501.20763-2-duchao@eswincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to RISC-V crypto spec, Zvkb extension is a
subset of the Zvbb extension [1].
1: 1769c2609b/doc/vector/riscv-crypto-vector-zvkb.adoc (L10)
Signed-off-by: Jerry Zhang Jian <jerry.zhangjian@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240528130349.20193-1-jerry.zhangjian@sifive.com>
[ Changes by AF:
- Tidy up commit message
- Rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu maps IRQs 0:15 for core interrupts and 16 onward for
guest interrupts which are later translated to hgiep in
`riscv_cpu_set_irq()` function.
With virtual IRQ support added, software now can fully
use the whole local interrupt range without any actual
hardware attached.
This change moves the guest interrupt range after the
core local interrupt range to avoid clash.
Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.")
Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.")
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240520125157.311503-3-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
AIA extends the width of all IRQ CSRs to 64bit even
in 32bit systems by adding missing half CSRs.
This seems to be missed while adding support for
virtual IRQs. The whole logic seems to be correct
except the width of the masks.
Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.")
Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.")
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240520125157.311503-2-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add missing include guard comment to gdbstub.h
- move gdbstub enums into separate header
- move qtest_[get|set]_virtual_clock functions
- allow plugins to manipulate the virtual clock
- introduce an Instructions Per Second plugin
- fix inject_mem_cb rw mask tests
- allow qemu_plugin_vcpu_mem_cb to shortcut when no memory cbs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmZ5OjoACgkQ+9DbCVqe
KkQPlwf/VK673BAjYktuCLnf3DgWvIkkiHWwzBREP5MmseUloLjK2CQPLY/xWZED
pbA/1OSzHViD/mvG5wTxwef36b9PIleWj5/YwBxGlrb/rh6hCd9004pZK4EMI3qU
53SK8Qron8TIXjey6XfmAY8rcl030GsHr0Zqf5i2pZKE5g0iaGlM3Cwkpo0SxQsu
kMNqiSs9NzX7LxB+YeuAauIvC1YA2F/MGTXeFCTtO9Beyp5oV7oOI+2zIvLjlG5M
Z5hKjG/STkNOteoIBGZpe1+QNpoGHSBoGE3nQnGpXb82iLx1KVBcKuQ6GoWGv1Wo
hqiSh9kJX479l0mLML+IzaDsgSglbg==
=pvWx
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-june24-240624-1' of https://gitlab.com/stsquad/qemu into staging
maintainer updates (plugins, gdbstub):
- add missing include guard comment to gdbstub.h
- move gdbstub enums into separate header
- move qtest_[get|set]_virtual_clock functions
- allow plugins to manipulate the virtual clock
- introduce an Instructions Per Second plugin
- fix inject_mem_cb rw mask tests
- allow qemu_plugin_vcpu_mem_cb to shortcut when no memory cbs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmZ5OjoACgkQ+9DbCVqe
# KkQPlwf/VK673BAjYktuCLnf3DgWvIkkiHWwzBREP5MmseUloLjK2CQPLY/xWZED
# pbA/1OSzHViD/mvG5wTxwef36b9PIleWj5/YwBxGlrb/rh6hCd9004pZK4EMI3qU
# 53SK8Qron8TIXjey6XfmAY8rcl030GsHr0Zqf5i2pZKE5g0iaGlM3Cwkpo0SxQsu
# kMNqiSs9NzX7LxB+YeuAauIvC1YA2F/MGTXeFCTtO9Beyp5oV7oOI+2zIvLjlG5M
# Z5hKjG/STkNOteoIBGZpe1+QNpoGHSBoGE3nQnGpXb82iLx1KVBcKuQ6GoWGv1Wo
# hqiSh9kJX479l0mLML+IzaDsgSglbg==
# =pvWx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 02:19:54 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
* tag 'pull-maintainer-june24-240624-1' of https://gitlab.com/stsquad/qemu:
accel/tcg: Avoid unnecessary call overhead from qemu_plugin_vcpu_mem_cb
plugins: fix inject_mem_cb rw masking
contrib/plugins: add Instructions Per Second (IPS) example for cost modeling
plugins: add migration blocker
plugins: add time control API
qtest: move qtest_{get, set}_virtual_clock to accel/qtest/qtest.c
sysemu: generalise qtest_warp_clock as qemu_clock_advance_virtual_time
qtest: use cpu interface in qtest_clock_warp
sysemu: add set_virtual_time to accel ops
plugins: Ensure register handles are not NULL
gdbstub: move enums into separate header
include/exec: add missing include guard comment
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is an experiment to further reduce the amount we throw into the
exec headers. It might not be as useful as I initially thought because
just under half of the users also need gdbserver_start().
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
The oldest model that IBM still supports is the z13. Considering
that each generation can "emulate" the previous two generations
in hardware (via the "IBC" feature of the CPUs), this means that
everything that is older than z114/196 is not an officially supported
CPU model anymore. The Linux kernel still support the z10, so if
we also take this into account, everything older than that can
definitely be considered as a legacy CPU model.
For downstream builds of QEMU, we would like to be able to disable
these legacy CPUs in the build. Thus add a CONFIG switch that can be
used to disable them (and old machine types that use them by default).
Message-Id: <20240614125019.588928-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The pid field of prstatus needs to be big endian like all of the other
fields.
Fixes: f738f296ea ("s390x/arch_dump: pass cpuid into notes sections")
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <5929f76d536d355afd04af51bf293695a1065118.1718771802.git.osandov@osandov.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
util/bufferiszero: Split out host include files
util/bufferiszero: Add loongarch64 vector acceleration
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZzRoMdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Y7gf/ZUTGjCUdAO7W7J5e
Z3JLUNOfUHO6PxoE05963XJc+APwKiuL6Yo2bnJo6km7WM50CoaX9/7L9CXD7STg
s3eUJ2p7FfvOADZgO373nqRrB/2mhvoywhDbVJBl+NcRvRUDW8rMqrlSKIAwDIsC
kwwTWlCfpBSlUgm/c6yCVmt815+sGUPD2k/p+pIzAVUG6fGYAosC2fwPzPajiDGX
Q+obV1fryKq2SRR2dMnhmPRtr3pQBBkISLuTX6xNM2+CYhYqhBrAlQaOEGhp7Dx3
ucKjvQFpHgPOSdQxb/HaDv81A20ZUQaydiNNmuKQcTtMx3MsQFR8NyVjH7L+fbS8
JokjaQ==
=yVKz
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240619' of https://gitlab.com/rth7680/qemu into staging
tcg/loongarch64: Support 64- and 256-bit vectors
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
util/bufferiszero: Split out host include files
util/bufferiszero: Add loongarch64 vector acceleration
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZzRoMdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9Y7gf/ZUTGjCUdAO7W7J5e
# Z3JLUNOfUHO6PxoE05963XJc+APwKiuL6Yo2bnJo6km7WM50CoaX9/7L9CXD7STg
# s3eUJ2p7FfvOADZgO373nqRrB/2mhvoywhDbVJBl+NcRvRUDW8rMqrlSKIAwDIsC
# kwwTWlCfpBSlUgm/c6yCVmt815+sGUPD2k/p+pIzAVUG6fGYAosC2fwPzPajiDGX
# Q+obV1fryKq2SRR2dMnhmPRtr3pQBBkISLuTX6xNM2+CYhYqhBrAlQaOEGhp7Dx3
# ucKjvQFpHgPOSdQxb/HaDv81A20ZUQaydiNNmuKQcTtMx3MsQFR8NyVjH7L+fbS8
# JokjaQ==
# =yVKz
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jun 2024 01:58:43 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240619' of https://gitlab.com/rth7680/qemu: (24 commits)
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
target/sparc: use signed denominator in sdiv helper
linux-user: Make TARGET_NR_setgroups affect only the current thread
accel/tcg: Fix typo causing tb->page_addr[1] to not be recorded
util/bufferiszero: Add loongarch64 vector acceleration
util/bufferiszero: Split out host include files
tcg/loongarch64: Enable v256 with LASX
tcg/loongarch64: Support LASX in tcg_out_vec_op
tcg/loongarch64: Split out vdvjukN in tcg_out_vec_op
tcg/loongarch64: Remove temp_vec from tcg_out_vec_op
tcg/loongarch64: Support LASX in tcg_out_{mov,ld,st}
tcg/loongarch64: Split out vdvjvk in tcg_out_vec_op
tcg/loongarch64: Support LASX in tcg_out_addsub_vec
tcg/loongarch64: Simplify tcg_out_addsub_vec
tcg/loongarch64: Support LASX in tcg_out_dupi_vec
tcg/loongarch64: Use tcg_out_dup_vec in tcg_out_dupi_vec
tcg/loongarch64: Support LASX in tcg_out_dupm_vec
tcg/loongarch64: Support LASX in tcg_out_dup_vec
tcg/loongarch64: Simplify tcg_out_dup_vec
util/loongarch64: Detect LASX vector support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The result has to be done with the signed denominator (b32) instead of
the unsigned value passed in argument (b).
Cc: qemu-stable@nongnu.org
Fixes: 1326010322 ("target/sparc: Remove CC_OP_DIV")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2319
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240606144331.698361-1-chigot@adacore.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit c9274b6bf0 ("target/s390x: start moving TCG-only code
to tcg/") moved mem_helper.c, but the trace-events file is
still in the parent directory, so is the generated trace.h.
Call the s390_skeys_get|set() helper, removing the need
for the trace event shared with the tcg/ sub-directory,
fixing the following build failure:
In file included from ../target/s390x/tcg/mem_helper.c:33:
../target/s390x/tcg/trace.h:1:10: fatal error: 'trace/trace-target_s390x_tcg.h' file not found
#include "trace/trace-target_s390x_tcg.h"
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240613104415.9643-3-philmd@linaro.org>
X86CPU::kvm_no_smi_migration was only used by the
pc-i440fx-2.3 machine, which got removed. Remove it
and simplify kvm_put_vcpu_events().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-23-philmd@linaro.org>
x86_cpu_change_kvm_default() was only used out of kvm-cpu.c by
the pc-i440fx-2.1 machine, which got removed. Make it static,
and remove its declaration. "kvm-cpu.h" is now empty, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-10-philmd@linaro.org>
There can be other confidential computing classes that are not derived
from sev-common. Avoid aborting when encountering them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the same flag generation code as SHL and SHR, but use
the existing gen_shiftd_rm_T1 function to compute the result
as well as CC_SRC.
Decoding-wise, SHLD/SHRD by immediate count as a 4 operand
instruction because s->T0 and s->T1 actually occupy three op
slots. The infrastructure used by opcodes in the 0F 3A table
works fine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SHLD/SHRD can have 3 register operands - s->T0, s->T1 and either
1 or CL - and therefore decode->op[2] is taken by the low part
of the register being shifted. Pass X86_OP_* to gen_shift_count
from its current callers and hardcode cpu_regs[R_ECX] as the
shift count.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use gen_ld_modrm/gen_st_modrm, moving them and gen_shift_flags to the
caller. This way, gen_shiftd_rm_T1 becomes something that the new
decoder can call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These have very simple generators and no need for complex group
decoding. Apart from LAR/LSL which are simplified to use
gen_op_deposit_reg_v and movcond, the code is generally lifted
from translate.c into the generators.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYSENTER is allowed in VM86 mode, but not in real mode. Split the check
so that PE and !VM86 are covered by separate bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already partly implemented due to VLDMXCSR and VSTMXCSR; finish
the job.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All other control registers are stored plainly in CPUX86State.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a bit more generic, as it can be applied to MPX as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like X86_ENTRYr, X86_ENTRYwr is easily changed to use only T0.
In this case, the motivation is to use it for the MOV instruction
family. The case when you need to preserve the input value is the
odd one, as it is used basically only for BLS* instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I am not sure why I made it use T1. It is a bit more symmetric with
respect to X86_ENTRYwr (which uses T0 for the "w"ritten operand
and T1 for the "r"ead operand), but it is also less flexible because it
does not let you apply zextT0/sextT0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes for easier cpu_cc_* setup, and not using set_cc_op()
should come in handy if QEMU ever implements APX.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid using set_cc_op() in preparation for implementing APX; treat
CC_OP_EFLAGS similar to the case where we have the "opposite" cc_op
(CC_OP_ADOX for ADCX and CC_OP_ADCX for ADOX), except the resulting
cc_op is not CC_OP_ADCOX. This is written easily as two "if"s, whose
conditions are both false for CC_OP_EFLAGS, both true for CC_OP_ADCOX,
and one each true for CC_OP_ADCX/ADOX.
The new logic also makes it easy to drop usage of tmp0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUX86State argument would only be used to fetch bytes, but that has to be
done before the generator function is called. So remove it, and all
temptation together with it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes Coverity CID 1546885.
Fixes: 16dcf200dc ("i386/sev: Introduce "sev-common" type to encapsulate common SEV state")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240607183611.1111100-4-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set 'finish->id_block_en' early, so that it is properly reset.
Fixes coverity CID 1546887.
Fixes: 7b34df4426 ("i386/sev: Introduce 'sev-snp-guest' object")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240607183611.1111100-2-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU is started with:
-cpu host,host-cache-info=on,l3-cache=off \
-smp 2,sockets=1,dies=1,cores=1,threads=2
Guest can't acquire maximum number of addressable IDs for processor cores in
the physical package from CPUID[04H].
When creating a CPU topology of 1 core per package, host-cache-info only
uses the Host's addressable core IDs field (CPUID.04H.EAX[bits 31-26]),
resulting in a conflict (on the multicore Host) between the Guest core
topology information in this field and the Guest's actual cores number.
Fix it by removing the unnecessary condition to cover 1 core per package
case. This is safe because cores_per_pkg will not be 0 and will be at
least 1.
Fixes: d7caf13b5f ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache")
Signed-off-by: Guixiong Wei <weiguixiong@bytedance.com>
Signed-off-by: Yipeng Yin <yinyipeng@bytedance.com>
Signed-off-by: Chuang Xu <xuchuangxclwt@bytedance.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240611032314.64076-1-xuchuangxclwt@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only predicate instruction arguments need to be initialized by
idef-parser. This commit removes registers from the init_list and
simplifies gen_inst_init_args() slightly.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-5-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
gen_inst_init_args() is called for instructions using a predicate as an
rvalue. Upon first call, the list of arguments which might need
initialization init_list is freed to indicate that they have been
processed. For instructions without an rvalue predicate,
gen_inst_init_args() isn't called and init_list will never be freed.
Free init_list from free_instruction() if it hasn't already been freed.
A comment in free_instruction is also updated.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-4-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-3-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Before switching to GArray/g_string_printf we used fixed size arrays for
output buffers and instructions arguments among other things.
Macros defining the sizes of these buffers were left behind, remove
them.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240523125901.27797-2-anjo@rev.ng>
Signed-off-by: Brian Cain <bcain@quicinc.com>
