Create a new include file for the pl011's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create a new include file for the pl031's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Peripheral Protection Controller's handling of unused ports
is that if there is nothing connected to the port's downstream
then it does not create the sysbus MMIO region for the upstream
end of the port. This results in odd behaviour when there is
an unused port in the middle of the range: since sysbus MMIO
regions are implicitly consecutively allocated, any used ports
above the unused ones end up with sysbus MMIO region numbers
that don't match the port number.
Avoid this numbering mismatch by creating dummy MMIO regions
for the unused ports. This doesn't change anything for our
existing boards, which don't have any gaps in the middle of
the port ranges they use; but it will be needed for the Musca
board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This shows a preexisting bug: if a KVM target did not have virtio-net enabled,
it would fail with undefined symbols when vhost was enabled. This must now
be fixed, lest targets that have no virtio-net fail to compile.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-5-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-6-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).
Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.
Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Here's the next batch of ppc and spapr patches. Higlights are:
* A bunch of improvements to TCG handling of vector instructions from
Richard Henderson and Marc Cave-Ayland
* Cleanup to the XICS interrupt controller from Greg Kurz, removing
the special KVM subclasses which were a bad idea
* Some refinements to the XIVE interrupt controller from Cédric Le
Goater
* Fix from Fabiano Rosas for a really dumb buffer overflow in the
device tree code for memory hotplug
* Code for allowing access to SPRs from the gdb stub from Fabiano
Rosas
* Assorted minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=QQra
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190219' into staging
ppc patch queue 2019-02-19
Here's the next batch of ppc and spapr patches. Higlights are:
* A bunch of improvements to TCG handling of vector instructions from
Richard Henderson and Marc Cave-Ayland
* Cleanup to the XICS interrupt controller from Greg Kurz, removing
the special KVM subclasses which were a bad idea
* Some refinements to the XIVE interrupt controller from Cédric Le
Goater
* Fix from Fabiano Rosas for a really dumb buffer overflow in the
device tree code for memory hotplug
* Code for allowing access to SPRs from the gdb stub from Fabiano
Rosas
* Assorted minor fixes and cleanups
# gpg: Signature made Mon 18 Feb 2019 13:47:54 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.0-20190219: (43 commits)
target/ppc: convert vmin* and vmax* to vector operations
target/ppc: convert vadd*s and vsub*s to vector operations
target/ppc: Split out VSCR_SAT to a vector field
target/ppc: Add set_vscr_sat
target/ppc: Use mtvscr/mfvscr for vmstate
target/ppc: Add helper_mfvscr
target/ppc: Remove vscr_nj and vscr_sat
target/ppc: Use helper_mtvscr for reset and gdb
target/ppc: Pass integer to helper_mtvscr
target/ppc: convert xxsel to vector operations
target/ppc: convert xxspltw to vector operations
target/ppc: convert xxspltib to vector operations
target/ppc: convert VSX logical operations to vector operations
target/ppc: convert vsplt[bhw] to use vector operations
target/ppc: convert vspltis[bhw] to use vector operations
target/ppc: convert vaddu[b,h,w,d] and vsubu[b,h,w,d] over to use vector operations
target/ppc: convert VMX logical instructions to use vector operations
xics: Drop the KVM ICS class
spapr/irq: Use the "simple" ICS class for KVM
xics: Handle KVM interrupt presentation from "simple" ICS code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=pNCA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-02-18' into staging
QAPI patches for 2019-02-18
# gpg: Signature made Mon 18 Feb 2019 13:44:30 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2019-02-18:
qapi: move RTC_CHANGE to the target schema
qmp: Deprecate query-events in favor of query-qmp-schema
Revert "qapi-events: add 'if' condition to implicit event enum"
qapi: remove qmp_unregister_command()
qapi: make query-cpu-definitions depend on specific targets
qapi: make query-cpu-model-expansion depend on s390 or x86
qapi: make query-gic-capabilities depend on TARGET_ARM
target.json: add a note about query-cpu* not being s390x-specific
qapi: make s390 commands depend on TARGET_S390X
qapi: make rtc-reset-reinjection and SEV depend on TARGET_I386
qapi: New module target.json
build: Deal with all of QAPI's .o in qapi/Makefile.objs
build-sys: move qmp-introspect per target
qapi: Generate QAPIEvent stuff into separate files
qapi: Prepare for system modules other than 'builtin'
qapi: Clean up modular built-in code generation a bit
qapi: Fix up documentation for recent commit a95291007b
qapi: Belatedly document modular code generation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This command is no longer needed, the schema has compile-time
configuration conditions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190214152251.2073-16-armbru@redhat.com>
We will need these from CONFIG_USER_ONLY as well,
which cannot access include/hw/.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190212053044.29015-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The KVM ICS class isn't used anymore. Drop it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023084177.1011724.14693955932559990358.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We want to use the "simple" ICS type in both KVM and non-KVM setups.
Teach the "simple" ICS how to present interrupts to KVM and adapt
sPAPR accordingly.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023082996.1011724.16237920586343905010.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pre_save(), post_load() and synchronize_state() methods of the
ICSStateClass type are really KVM only things. Make that obvious
by dropping the indirections and directly calling the KVM functions
instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023081817.1011724.14078777320394028836.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The KVM ICP class isn't used anymore. Drop it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023081228.1011724.12474992370439652538.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The base ICP class knows how to interact with KVM. Adapt sPAPR to use it
instead of the ICP KVM class.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023080638.1011724.792095453419098948.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The realization of KVM ICP currently follows the parent_realize logic,
which is a bit overkill here. Also we want to get rid of the KVM ICP
class. Explicitely call icp_kvm_realize() from the base ICP realize
function.
Note that ICPStateClass::parent_realize is retained because powernv
needs it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023080049.1011724.15423463482790260696.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The KVM ICP reset handler simply writes the ICP state to KVM. This
doesn't need the overkill parent_reset logic we have today. Call
icp_set_kvm_state() from the base ICP reset function instead.
Since there are no other users for ICPStateClass::parent_reset, and
it isn't currently expected to change, drop it as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023079461.1011724.12644984391500635645.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pre_save(), post_load() and synchronize_state() methods of the
ICPStateClass type are really KVM only things. Make that obvious
by dropping the indirections and directly calling the KVM functions
instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023078871.1011724.3083923389814185598.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using the 'dual' interrupt mode, the source numbers of both sPAPR
IRQ backends are aligned to share a common IRQ number space and to use
a similar mapping of the machine qemu_irq array which is indexed by
the source number.
The XICS IRQ number range initially being [ 0x1000 - 0x2000 ], this
requires to change the XICS ICSState offset to 0 and to provision for
an extra 4K of source numbers and qemu_irqs which will never be used
by the machine when running under the XICS interrupt mode. This is not
an optimal solution.
Change the init() method to allocate an IRQ number space of the
expected size for the XICS sPAPR IRQ backend. It breaks the interrupt
signaling when under the 'dual' mode because source numbers have
unexpected values but next patch will fix that.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190213210756.27032-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Certain devices types, like memory/CPU, are now being handled using a
hotplug interface provided by a top-level MachineClass. Hotpluggable
host bridges are another such device where it makes sense to use a
machine-level hotplug handler. However, unlike those devices,
host-bridges have a parent bus (the main system bus), and devices with
a parent bus use a different mechanism for registering their hotplug
handlers: qbus_set_hotplug_handler(). This interface currently expects
a handler to be a subclass of DeviceClass, but this is not the case
for MachineClass, which derives directly from ObjectClass.
Internally, the interface only requires an ObjectClass, so expose that
in qbus_set_hotplug_handler().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <154999589921.690774.3640149277362188566.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
MSI is the default and LSI specific code is guarded by the
xive_source_irq_is_lsi() helper. The xive_source_irq_set()
helper is a nop for MSIs.
Simplify the code by turning xive_source_irq_set() into
xive_source_irq_set_lsi() and only call it for LSIs. The
call to xive_source_irq_set(false) in spapr_xive_irq_free()
is also a nop. Just drop it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <154999584656.690774.18352404495120358613.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All this code is used with both the XICS and XIVE interrupt controllers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of handling mux chardev in a special way in
qemu_chr_fe_set_handlers(), we may use the chr_update_read_handler
class callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190206174328.9736-2-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add the ability for a caller to wait for completion of the
background thread to synchronously dispatch its result, without
needing to wait for the main loop to run the idle callback.
This method needs very careful usage to avoid a dangerous
race condition with the free'ing of the task. The completion
callback is normally invoked from an idle callback registered
with the main loop context. The qio_task_wait_thread method
must only be called if the completion callback has not yet
run. The only safe way to achieve this is to run the
qio_task_wait_thread method from the thread that executes
the main loop.
It is generally a bad idea to use this method since it will
block execution of the main loop, however, the design of
the character devices and its usage from vhostuser already
requires blocking execution.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-3-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When chardev is multiplexed (mux=on) there are a lot of cases where
CHR_EVENT_OPENED/CHR_EVENT_CLOSED events pairing (expected from
frontend side) is broken. There are either generation of multiple
repeated or extra CHR_EVENT_OPENED events, or CHR_EVENT_CLOSED just
isn't generated at all.
This is mostly because 'qemu_chr_fe_set_handlers()' function makes its
own (and often wrong) implicit decision on updated frontend state and
invokes 'fd_event' callback with 'CHR_EVENT_OPENED'. And even worse,
it doesn't do symmetric action in opposite direction, as someone may
expect (i.e. it doesn't invoke previously set 'fd_event' with
'CHR_EVENT_CLOSED'). Muxed chardev uses trick by calling this function
again to replace callback handlers with its own ones, but it doesn't
account for such side effect.
Fix that using extended version of this function with added argument
for disabling side effect and keep original function for compatibility
with lots of frontends already using this interface and being
"tolerant" to its side effects.
One more source of event duplication is just line of code in
char-mux.c, which does far more than comment above says (obvious fix).
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7dde6abbd21682857f8294644013173c0b9949b3.1541507990.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Inform a user in case qcow2_get_specific_info fails to obtain
QCOW2 image specific information. This patch is preliminary to
the one "qcow2: Add list of bitmaps to ImageInfoSpecificQCow2".
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1549638368-530182-2-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Marc-André Lureau (27):
slirp: generalize guestfwd with a callback based approach
net/slirp: simplify checking for cmd: prefix
net/slirp: free forwarding rules on cleanup
net/slirp: fix leaks on forwarding rule registration error
slirp: add callbacks for timer
slirp: replace trace functions with DEBUG calls
slirp: replace QEMU_PACKED with SLIRP_PACKED
slirp: replace most qemu socket utilities with slirp own version
slirp: replace qemu_set_nonblock()
slirp: add unregister_poll_fd() callback
slirp: replace qemu_notify_event() with a callback
slirp: move QEMU state saving to a separate unit
slirp: do not include qemu headers in libslirp.h public API header
slirp: improve windows headers inclusion
slirp: add slirp own version of pstrcpy
slirp: remove qemu timer.h dependency
slirp: remove now useless QEMU headers inclusions
slirp: replace net/eth.h inclusion with own defines
slirp: replace qemu qtailq with slirp own copy
slirp: replace remaining qemu headers dependency
slirp: prefer c99 types over BSD kind
slirp: improve send_packet() callback
slirp: replace global polling with per-instance & notifier
slirp: remove slirp_instances list
slirp: use polling callbacks, drop glib requirement
slirp: pass opaque to all callbacks
slirp: API is extern C
Peter Maydell (2):
slirp: Avoid marking naturally packed structs as QEMU_PACKED
slirp: Don't mark struct ipq or struct ipasfrag as packed
Samuel Thibault (3):
slirp: Avoid unaligned 16bit memory access
slirp: replace QEMU_BUILD_BUG_ON with G_STATIC_ASSERT
slirp: Move g_spawn_async_with_fds_qemu compatibility to slirp/
-----BEGIN PGP SIGNATURE-----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=nIy1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging
More work towards libslirp
Marc-André Lureau (27):
slirp: generalize guestfwd with a callback based approach
net/slirp: simplify checking for cmd: prefix
net/slirp: free forwarding rules on cleanup
net/slirp: fix leaks on forwarding rule registration error
slirp: add callbacks for timer
slirp: replace trace functions with DEBUG calls
slirp: replace QEMU_PACKED with SLIRP_PACKED
slirp: replace most qemu socket utilities with slirp own version
slirp: replace qemu_set_nonblock()
slirp: add unregister_poll_fd() callback
slirp: replace qemu_notify_event() with a callback
slirp: move QEMU state saving to a separate unit
slirp: do not include qemu headers in libslirp.h public API header
slirp: improve windows headers inclusion
slirp: add slirp own version of pstrcpy
slirp: remove qemu timer.h dependency
slirp: remove now useless QEMU headers inclusions
slirp: replace net/eth.h inclusion with own defines
slirp: replace qemu qtailq with slirp own copy
slirp: replace remaining qemu headers dependency
slirp: prefer c99 types over BSD kind
slirp: improve send_packet() callback
slirp: replace global polling with per-instance & notifier
slirp: remove slirp_instances list
slirp: use polling callbacks, drop glib requirement
slirp: pass opaque to all callbacks
slirp: API is extern C
Peter Maydell (2):
slirp: Avoid marking naturally packed structs as QEMU_PACKED
slirp: Don't mark struct ipq or struct ipasfrag as packed
Samuel Thibault (3):
slirp: Avoid unaligned 16bit memory access
slirp: replace QEMU_BUILD_BUG_ON with G_STATIC_ASSERT
slirp: Move g_spawn_async_with_fds_qemu compatibility to slirp/
# gpg: Signature made Thu 07 Feb 2019 14:02:41 GMT
# gpg: using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg: aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: E61D BB15 D417 2BDE C97E 92D9 DB55 0E89 F0FA 54F3
* remotes/thibault/tags/samuel-thibault: (32 commits)
slirp: API is extern C
slirp: pass opaque to all callbacks
slirp: use polling callbacks, drop glib requirement
slirp: remove slirp_instances list
slirp: replace global polling with per-instance & notifier
slirp: improve send_packet() callback
slirp: prefer c99 types over BSD kind
slirp: replace remaining qemu headers dependency
slirp: Move g_spawn_async_with_fds_qemu compatibility to slirp/
slirp: replace QEMU_BUILD_BUG_ON with G_STATIC_ASSERT
slirp: replace qemu qtailq with slirp own copy
slirp: replace net/eth.h inclusion with own defines
slirp: remove now useless QEMU headers inclusions
slirp: remove qemu timer.h dependency
slirp: add slirp own version of pstrcpy
slirp: improve windows headers inclusion
slirp: do not include qemu headers in libslirp.h public API header
slirp: move QEMU state saving to a separate unit
slirp: replace qemu_notify_event() with a callback
slirp: add unregister_poll_fd() callback
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove hard-coded dependency on slirp in main-loop, and use a "poll"
notifier instead. The notifier is registered per slirp instance.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Use a more descriptive name for the callback.
Reuse the SlirpWriteCb type. Wrap it to check that all data has been written.
Return a ssize_t for potential error handling and data-loss reporting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Only slirp actually needs it, and will need it along in libslirp.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Update the copyright string we use in version/help output,
since we're well into the new year now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190201173655.4567-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In commit f7b78602fd we added the CPU cluster number to the
cflags field of the TB hash; this included adding it to the value
kept in tb->cflags, since we pass that field directly into the hash
calculation in some places. Unfortunately we forgot to check whether
other parts of the code were doing comparisons against tb->cflags
that would need to be updated.
It turns out that there is exactly one such place: the
tb_lookup__cpu_state() function checks whether the TB it has
found in the tb_jmp_cache has a tb->cflags matching the cf_mask
that is passed in. The tb->cflags has the cluster_index in it
but the cf_mask does not.
Hoist the "add cluster index to the cf_mask" code up from
tb_htable_lookup() to tb_lookup__cpu_state() so it can be considered
in the "did this TB match in the jmp cache" condition, as well as
when we do the full hash lookup by physical PC, flags, etc.
(tb_htable_lookup() is only called from tb_lookup__cpu_state(),
so this change doesn't require any further knock-on changes.)
Fixes: f7b78602fd ("accel/tcg: Add cluster number to TCG TB hash")
Tested-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Reported-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190205151810.571-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Without this patch, gcc might up the Input/Output registers and
cause unpredictable error.
Fixes: 1ec182c333 ("target/arm: Convert to HAVE_CMPXCHG128")
Signed-off-by: Catherine Ho <catherine.hecx@gmail.com>
Message-Id: <1548838794-23757-1-git-send-email-catherine.hecx@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Implement Armv8.5-BTI extension for system emulation mode
* Implement the PR_PAC_RESET_KEYS prctl() for linux-user mode's Armv8.3-PAuth support
* Support TBI (top-byte-ignore) properly for linux-user mode
* gdbstub: allow killing QEMU via vKill command
* hw/arm/boot: Support DTB autoload for firmware-only boots
* target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
-----BEGIN PGP SIGNATURE-----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=XEy2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190205' into staging
target-arm queue:
* Implement Armv8.5-BTI extension for system emulation mode
* Implement the PR_PAC_RESET_KEYS prctl() for linux-user mode's Armv8.3-PAuth support
* Support TBI (top-byte-ignore) properly for linux-user mode
* gdbstub: allow killing QEMU via vKill command
* hw/arm/boot: Support DTB autoload for firmware-only boots
* target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
# gpg: Signature made Tue 05 Feb 2019 17:04:22 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190205: (22 commits)
target/arm: Make FPSCR/FPCR trapped-exception bits RAZ/WI
hw/arm/boot: Support DTB autoload for firmware-only boots
hw/arm/boot: Clarify why arm_setup_firmware_boot() doesn't set env->boot_info
hw/arm/boot: Factor out "set up firmware boot" code
hw/arm/boot: Factor out "direct kernel boot" code into its own function
hw/arm/boot: Fix block comment style in arm_load_kernel()
gdbstub: allow killing QEMU via vKill command
target/arm: Enable TBI for user-only
target/arm: Compute TB_FLAGS for TBI for user-only
target/arm: Clean TBI for data operations in the translator
target/arm: Add TBFLAG_A64_TBID, split out gen_top_byte_ignore
tests/tcg/aarch64: Add pauth smoke test
linux-user: Implement PR_PAC_RESET_KEYS
target/arm: Enable BTI for -cpu max
target/arm: Set btype for indirect branches
target/arm: Reset btype for direct branches
target/arm: Default handling of BTYPE during translation
target/arm: Cache the GP bit for a page in MemTxAttrs
exec: Add target-specific tlb bits to MemTxAttrs
target/arm: Add BT and BTYPE to tb->flags
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These bits can be used to cache target-specific data in cputlb
read from the page tables.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190128223118.5255-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost user blk discard/write zeroes features
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcWbMUAAoJECgfDbjSjVRp2acH+wa8abfyQIpVMji+cdvcw7Wo
yJjCoPxX0y+tm7FGp6YjyyQhSzjUYRS+71NL6xkZVxs8yh4ZCbb/xDRYmrVG2cb6
6tUcqp1zlMp+w+kVKS4m4WTb0Z1bIODOi99tNBXxYjWY9lXF/hjZbhRpt6vL/NaP
hqYtp+wlhyjxsY/GFn5XZLY7F6+QKq/lsMJD80FvbtHBh/ngqmgyoouNwYzg1faW
M3wD5A3IOXLzU+MGK6uCtKK0+t3xzvaVJL7zChimKkn+y+Pg9T+s04zQS739bJRg
dYYrVK3IOt2tvVxBZnnUm9eBIxxElAxRssmERPe2i0mBRSXYKomuVZrXJ6ROhjA=
=TxWc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, features
vhost user blk discard/write zeroes features
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Feb 2019 16:00:20 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
contrib/libvhost-user: cleanup casts
r2d: fix build on mingw
mmap-alloc: fix hugetlbfs misaligned length in ppc64
mmap-alloc: unfold qemu_ram_mmap()
i386, acpi: cleanup build_facs by removing second unused argument
fw_cfg: fix the life cycle and the name of "qemu_extra_params_fw"
acpi: Make TPM 2.0 with TIS available as MSFT0101
hw/virtio: Use CONFIG_VIRTIO_PCI switch instead of CONFIG_PCI
vhost-user-blk: add discard/write zeroes features support
contrib/vhost-user-blk: fix the compilation issue
pci/msi: export msi_is_masked()
intel_iommu: reset intr_enabled when system reset
intel_iommu: fix operator in vtd_switch_address_space
hw: virtio-pci: drop DO_UPCAST
include: update Linux headers to 4.21-rc1/5.0-rc1
scripts/update-linux-headers.sh: adjust for Linux 4.21-rc1 (or 5.0-rc1)
contrib/libvhost-user: switch to uint64_t
virtio: add checks for the size of the indirect table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The commit 7197fb4058 ("util/mmap-alloc:
fix hugetlb support on ppc64") fixed Huge TLB mappings on ppc64.
However, we still need to consider the underlying huge page size
during munmap() because it requires that both address and length be a
multiple of the underlying huge page size for Huge TLB mappings.
Quote from "Huge page (Huge TLB) mappings" paragraph under NOTES
section of the munmap(2) manual:
"For munmap(), addr and length must both be a multiple of the
underlying huge page size."
On ppc64, the munmap() in qemu_ram_munmap() does not work for Huge TLB
mappings because the mapped segment can be aligned with the underlying
huge page size, not aligned with the native system page size, as
returned by getpagesize().
This has the side effect of not releasing huge pages back to the pool
after a hugetlbfs file-backed memory device is hot-unplugged.
This patch fixes the situation in qemu_ram_mmap() and
qemu_ram_munmap() by considering the underlying page size on ppc64.
After this patch, memory hot-unplug releases huge pages back to the
pool.
Fixes: 7197fb4058
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Linux commit 1f23816b8 "virtio_blk: add discard and write zeroes support"
added the support in the Guest kernel, while here also enable the features
support with vhost-user-blk driver. Also enable the test example utility
with DISCARD and WRITE ZEROES commands.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is going to be used later on outside MSI code to detect whether one
MSI vector is masked out.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The iteration was stopping as soon as prev_var was set to NULL, and
therefore it skipped the first element. Fortunately, or unfortunately,
we have only one use of QTAILQ_FOREACH_REVERSE_SAFE. Thus this only
showed up as incorrect register preferences on the very first translation
block that was compiled.
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU 3.0, and nobody complained so far, so
it is time to remove this option now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1544684731-18828-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it's from v4.20-rc5.
CC: Stefano Garzarella <sgarzare@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some address/memory APIs have different type between
'hwaddr/target_ulong addr' and 'int len'. It is very unsafe, especially
some APIs will be passed a non-int len by caller which might cause
overflow quietly.
Below is an potential overflow case:
dma_memory_read(uint32_t len)
-> dma_memory_rw(uint32_t len)
-> dma_memory_rw_relaxed(uint32_t len)
-> address_space_rw(int len) # len overflow
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Crosthwaite <crosthwaite.peter@gmail.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to avoid migration issues, we enable PVH only for
machine type >= 4.0
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These changes (along with corresponding Linux kernel and qboot changes)
enable a guest to be booted using the x86/HVM direct boot ABI.
This commit adds a load_elfboot() routine to pass the size and
location of the kernel entry point to qboot (which will fill in
the start_info struct information needed to to boot the guest).
Having loaded the ELF binary, load_linux() will run qboot
which continues the boot.
The address for the kernel entry point is read from an ELF Note
in the uncompressed kernel binary by a helper routine passed
to load_elf().
Co-developed-by: George Kennedy <George.Kennedy@oracle.com>
Signed-off-by: George Kennedy <George.Kennedy@oracle.com>
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x86/HVM direct boot ABI permits Qemu to be able to boot directly
into the uncompressed Linux kernel binary with minimal firmware involvement.
https://xenbits.xen.org/docs/unstable/misc/pvh.html
This commit adds the header file that defines the start_info struct
that needs to be populated in order to use this ABI.
The canonical version of start_info.h is in the Xen codebase.
(like QEMU, the Linux kernel uses a copy as well).
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <Konrad.Wilk@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a routine which, given a pointer to a range of ELF Notes,
searches through them looking for a note matching the type specified
and returns a pointer to the matching ELF note.
get_elf_note_type() is used by elf_load[32|64]() to find the
specified note type required by the 'elf_note_fn' parameter
added in the previous commit.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
This patch adds an optional function pointer, 'elf_note_fn', to
load_elf() which causes load_elf() to additionally parse any
ELF program headers of type PT_NOTE and check to see if the ELF
Note is of the type specified by the 'translate_opaque' arg.
If a matching ELF Note is found then the specfied function pointer
is called to process the ELF note.
Passing a NULL function pointer results in ELF Notes being skipped.
The first consumer of this functionality is the PVHboot support
which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while
loading the uncompressed kernel binary in order to discover the
boot entry address for the x86/HVM direct boot ABI.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new keyboard state tracked for gtk. Allows to drop the
gtk-specific modifier state tracking code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-6-kraxel@redhat.com
Use the new keyboard state tracked for sdl2. We can drop the modifier
state tracking from sdl2. Also keyup code is simpler, the state tracker
will take care to not send suspious keyup events to the guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-4-kraxel@redhat.com
Now that most user interfaces are using QKeyCodes it is easier to have
common keyboard code useable by all user interfaces.
This patch adds helper code to track the state of all keyboard keys,
using a bitmap indexed by QKeyCode. Modifier state is tracked too,
as separate bitmap. That makes checking modifier state easier.
Likewise we can easily apply special handling for capslock & numlock
(toggles on keypress) and ctrl + shift (we have two keys for that).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190122092814.14919-2-kraxel@redhat.com
[ kraxel: added license boilerplate header ]
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This would help gtk-egl display showing scaled DMABuf cursor images when
gtk window was zoomed. A default scale of (1.0, 1.0) was presumed for
call sites where no scaling is needed.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Message-id: 23B229B3-3095-4DFB-8369-866784808D30@me.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- fix CPU wakeup on runstall changes; expose runstall as an IRQ line;
- place mini-bootloader at the BSP reset vector;
- expose CPU core frequency in XTFPGA board FPGA register;
- rearrange access to external interrupts of xtensa cores;
- add MX interrupt distributor and use it on SMP XTFPGA boards;
- add test_mmuhifi_c3 xtensa core variant;
- raise number of CPUs that can be instantiated on XTFPGA boards.
-----BEGIN PGP SIGNATURE-----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=8D60
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20190204-xtensa' into staging
target/xtensa: SMP updates and various fixes
- fix CPU wakeup on runstall changes; expose runstall as an IRQ line;
- place mini-bootloader at the BSP reset vector;
- expose CPU core frequency in XTFPGA board FPGA register;
- rearrange access to external interrupts of xtensa cores;
- add MX interrupt distributor and use it on SMP XTFPGA boards;
- add test_mmuhifi_c3 xtensa core variant;
- raise number of CPUs that can be instantiated on XTFPGA boards.
# gpg: Signature made Mon 04 Feb 2019 18:59:32 GMT
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20190204-xtensa:
hw/xtensa: xtfpga: raise CPU number limit
target/xtensa: add test_mmuhifi_c3 core
hw/xtensa: xtfpga: use MX PIC for SMP
target/xtensa: add MX interrupt controller
target/xtensa: expose core runstall as an IRQ line
target/xtensa: rearrange access to external interrupts
target/xtensa: drop function xtensa_timer_irq
target/xtensa: fix access to the INTERRUPT SR
hw/xtensa: xtfpga: use core frequency
hw/xtensa: xtfpga: fix bootloader placement in SMP
target/xtensa: add qemu_cpu_kick to xtensa_runstall
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The -no-frame option has been deprecated with QEMU v2.12. It was only
useful with SDL1.2 - now that we've removed support for SDL1.2, we
can certainly remove the -no-frame option, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1549351769-19620-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We generally do very similar things around nbd_read: error_prepend
specifying what we have tried to read, and be_to_cpu conversion of
integers.
So, it seems reasonable to move common things to helper functions,
which:
1. simplify code a bit
2. generalize nbd_read error descriptions, all starting with
"Failed to read"
3. make it more difficult to forget to convert things from BE
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190128165830.165170-1-vsementsov@virtuozzo.com>
[eblake: rename macro to DEF_NBD_READ_N and formatting tweaks;
checkpatch has false positive complaint]
Signed-off-by: Eric Blake <eblake@redhat.com>
The commit 7197fb4058 ("util/mmap-alloc:
fix hugetlb support on ppc64") fixed Huge TLB mappings on ppc64.
However, we still need to consider the underlying huge page size
during munmap() because it requires that both address and length be a
multiple of the underlying huge page size for Huge TLB mappings.
Quote from "Huge page (Huge TLB) mappings" paragraph under NOTES
section of the munmap(2) manual:
"For munmap(), addr and length must both be a multiple of the
underlying huge page size."
On ppc64, the munmap() in qemu_ram_munmap() does not work for Huge TLB
mappings because the mapped segment can be aligned with the underlying
huge page size, not aligned with the native system page size, as
returned by getpagesize().
This has the side effect of not releasing huge pages back to the pool
after a hugetlbfs file-backed memory device is hot-unplugged.
This patch fixes the situation in qemu_ram_mmap() and
qemu_ram_munmap() by considering the underlying page size on ppc64.
After this patch, memory hot-unplug releases huge pages back to the
pool.
Fixes: 7197fb4058
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Next step is to remove them from under the PowerPCCPU
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Include the interrupt presenter under the machine_data as we plan to
remove it from under PowerPCCPU
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It provides a mean to retrieve the XiveTCTX of a CPU. This will become
necessary with future changes which move the interrupt presenter
object pointers under the PowerPCCPU machine_data.
The PowerNV machine has an extra requirement on TIMA accesses that
this new method addresses. The machine can perform indirect loads and
stores on the TIMA on behalf of another CPU. The PIR being defined in
the controller registers, we need a way to peek in the controller
model to find the PIR value.
The XiveTCTX is moved above the XiveRouter definition to avoid forward
typedef declarations.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To avoid overflow if larger values are added later use ram_addr_t for
the sdram_bank_sizes parameter to match ram_size to which it is compared.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several boards with SPD EEPROMs that are now using
duplicated or slightly different hard coded data. Add a helper to
generate SPD data for a memory module of given type and size that
could be used by these boards (either as is or with further changes if
needed) which should help cleaning this up and avoid further duplication.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is simply running the newly-updated script on Linux, in
order to obtain the new header files and all the other updates
from the recent Linux merge window.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- vmdk: Support for blockdev-create
- block: Apply auto-read-only for ro-whitelist drivers
- virtio-scsi: Fixes related to attaching/detaching iothreads
- scsi-disk: Fixed erroneously detected multipath setup with multiple
disks created with node-names. Added device_id property.
- block: Fix hangs in synchronous APIs with iothreads
- block: Fix invalidate_cache error path for parent activation
- block-backend, mirror, qcow2, vpc, vdi, qemu-iotests:
Minor fixes and code improvements
-----BEGIN PGP SIGNATURE-----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=oaAn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- vmdk: Support for blockdev-create
- block: Apply auto-read-only for ro-whitelist drivers
- virtio-scsi: Fixes related to attaching/detaching iothreads
- scsi-disk: Fixed erroneously detected multipath setup with multiple
disks created with node-names. Added device_id property.
- block: Fix hangs in synchronous APIs with iothreads
- block: Fix invalidate_cache error path for parent activation
- block-backend, mirror, qcow2, vpc, vdi, qemu-iotests:
Minor fixes and code improvements
# gpg: Signature made Fri 01 Feb 2019 15:23:10 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (27 commits)
scsi-disk: Add device_id property
scsi-disk: Don't use empty string as device id
qtest.py: Wait for the result of qtest commands
block: Fix invalidate_cache error path for parent activation
iotests/236: fix transaction kwarg order
iotests: Filter second BLOCK_JOB_ERROR from 229
virtio-scsi: Forbid devices with different iothreads sharing a blockdev
scsi-disk: Acquire the AioContext in scsi_*_realize()
virtio-scsi: Move BlockBackend back to the main AioContext on unplug
block: Eliminate the S_1KiB, S_2KiB, ... macros
block: Remove blk_attach_dev_legacy() / legacy_dev code
block: Apply auto-read-only for ro-whitelist drivers
uuid: Make qemu_uuid_bswap() take and return a QemuUUID
block/vdi: Don't take address of fields in packed structs
block/vpc: Don't take address of fields in packed structs
vmdk: Reject excess extents in blockdev-create
iotests: Add VMDK tests for blockdev-create
iotests: Filter cid numbers in VMDK extent info
vmdk: Implement .bdrv_co_create callback
vmdk: Refactor vmdk_create_extent
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The nRF51 contains three regions of non-volatile memory (NVM):
- CODE (R/W): contains code
- FICR (R): Factory information like code size, chip id etc.
- UICR (R/W): Changeable configuration data. Lock bits, Code
protection configuration, Bootloader address, Nordic SoftRadio
configuration, Firmware configuration.
Read and write access to the memories is managed by the
Non-volatile memory controller.
Memory schema:
[ CPU ] -+- [ NVM, either FICR, UICR or CODE ]
| |
\- [ NVMC ]
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190201023357.22596-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, the set_pc logic was unclear, which raised questions about
whether it should be used directly, applying a value to PC or adding
additional checks, for example, set the Thumb bit in Arm cpu. Let's set
the set_pc logic for “Configure the PC, as was done in the ELF file”
and implement synchronize_with_tb hook for preserving PC to cpu_tb_exec.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190129121817.7109-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the SSE-200, now we have put in all
the code that lets us make it different from the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-22-peter.maydell@linaro.org
Instantiate a copy of the CPU_IDENTITY register block for each CPU
in an SSE-200.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-21-peter.maydell@linaro.org
The SSE-200 has a CPU_IDENTITY register block, which is a set of
read-only registers. As well as the usual PID/CID registers, there
is a single CPUID register which indicates whether the CPU is CPU 0
or CPU 1. Implement a model of this register block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-20-peter.maydell@linaro.org
The SSE-200 has a "CPU local security control" register bank; add an
unimplemented-device stub for it. (The register bank has only one
interesting register, which allows the guest to lock down changes
to various CPU registers so they cannot be modified further. We
don't support that in our Cortex-M33 model anyway.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-19-peter.maydell@linaro.org
The SSE-200 gives each CPU a register bank to use to control its
L1 instruction cache. Put in an unimplemented-device stub for this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-18-peter.maydell@linaro.org
Add unimplemented-device stubs for the various Power Policy Unit
devices that the SSE-200 has.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-17-peter.maydell@linaro.org
The SSE-200 has two Message Handling Units (MHUs), which sit behind
the APB PPC0. Wire up some unimplemented-device stubs for these,
since we don't yet implement a real model of this device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-16-peter.maydell@linaro.org
The SYS_VERSION and SYS_CONFIG register values differ between the
IoTKit and SSE-200. Make them configurable via QOM properties rather
than hard-coded, and set them appropriately in the ARMSSE code that
instantiates the IOTKIT_SYSINFO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-15-peter.maydell@linaro.org
Create a cluster object to hold each CPU in the SSE. They are
logically distinct and may be configured differently (for instance
one may not have an FPU where the other does).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-14-peter.maydell@linaro.org
Give each CPU its own container memory region. This is necessary
for two reasons:
* some devices are instantiated one per CPU and the CPU sees only
its own device
* since a memory region can only be put into one container, we must
give each armv7m object a different MemoryRegion as its 'memory'
property, or a dual-CPU configuration will assert on realize when
the second armv7m object tries to put the MR into a container when
it is already in the first armv7m object's container
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-13-peter.maydell@linaro.org
The SSE-200 has two Cortex-M33 CPUs. These see the same view
of memory, with the exception of the "private CPU region" which
has per-CPU devices. Internal device interrupts for SSE-200
devices are mostly wired up to both CPUs, with the exception of
a few per-CPU devices. External GPIO inputs on the SSE-200
device are provided for the second CPU's interrupts above 32,
as is already the case for the first CPU.
Refactor the code to support creation of multiple CPUs.
For the moment we leave all CPUs with the same view of
memory: this will not work in the multiple-CPU case, but
we will fix this in the following commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-12-peter.maydell@linaro.org
For the IoTKit the SRAM bank size is always 32K (15 bits); for the
SSE-200 this is a configurable parameter, which defaults to 32K but
can be changed when it is built into a particular SoC. For instance
the Musca-B1 board sets it to 128K (17 bits).
Make the bank size a QOM property. We follow the SSE-200 hardware in
naming the parameter SRAM_ADDR_WIDTH, which specifies the number of
address bits of a single SRAM bank.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-11-peter.maydell@linaro.org
The SSE-200 has four banks of SRAM, each with its own
Memory Protection Controller, where the IoTKit has only one.
Make the number of SRAM banks a field in ARMSSEInfo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-10-peter.maydell@linaro.org
The SSE-200 has 4 banks of SRAM, each with its own internal
Memory Protection Controller. The interrupt status for these
extra MPCs appears in the same security controller SECMPCINTSTATUS
register as the MPC for the IoTKit's single SRAM bank. Enhance the
iotkit-secctl device to allow 4 MPCs. (If the particular IoTKit/SSE
variant in use does not have all 4 MPCs then the unused inputs will
simply result in the SECMPCINTSTATUS bits being zero as required.)
The hardcoded constant "1"s in armsse.c indicate the actual number
of SRAM MPCs the IoTKit has, and will be replaced in the following
commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-9-peter.maydell@linaro.org
Rename the files that used to be iotkit.[ch] to
armsse.[ch] to reflect the fact they new cover
multiple Arm subsystems for embedded.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-8-peter.maydell@linaro.org
The Arm SSE-200 Subsystem for Embedded is a revised and
extended version of the older IoTKit SoC. Prepare for
adding a model of it by refactoring the IoTKit code into
an abstract base class which contains the functionality,
driven by a class data block specific to each subclass.
(This is the same approach used by the existing bcm283x
SoC family implementation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-6-peter.maydell@linaro.org
The Arm IoTKit was effectively the forerunner of a series of
subsystems for embedded SoCs, named the SSE-050, SSE-100 and SSE-200:
https://developer.arm.com/products/system-design/subsystems
These are generally quite similar, though later iterations have
extra devices that earlier ones do not.
We want to add a model of the SSE-200, which means refactoring the
IoTKit code into an abstract base class and subclasses (using the
same design that the bcm283x SoC and Aspeed SoC family
implementations do). As a first step, rename the IoTKit struct and
QOM macros to ARMSSE, which is what we're going to name the base
class. We temporarily retain TYPE_IOTKIT to avoid changing the
code that instantiates a TYPE_IOTKIT device here and then changing
it back again when it is re-introduced as a subclass.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-5-peter.maydell@linaro.org
Expose "start-powered-off" as a property of the ARMv7M container,
which we just pass through to the CPU object in the same way that we
do for "init-svtor" and "idau". (We want this for the SSE-200, which
powers up only the first CPU at reset and leaves the second powered
down.)
As with the other CPU properties here, we can't just use alias
properties, because the CPU QOM object is not created until armv7m
realize time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-4-peter.maydell@linaro.org
We define 54 macros for the powers of two >= 1024. We use six, in six
macro definitions. Four of them could just as well use the common MiB
macro, so do that. The remaining two can't, because they get passed
to stringify. Replace the macro by the literal number there.
Slightly harder to read in one instance (1048576 vs. S_1MiB), so add a
comment there. The other instance is a wash: 65536 vs S_64KiB. 65536
has been good enough for more than seven years there.
This effectively reverts commit 540b849261 and 1240ac558d.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The last user of blk_attach_dev_legacy() was the code in xen_disk which
has recently been reworked. Now there is no user for this legacy function
anymore. Thus we can finally remove all code related to the "legacy_dev"
flag, too, and turn the related "void *" in block-backend.c into proper
"DeviceState *" to fix some of the remaining TODOs there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu_uuid_bswap() takes a pointer to the QemuUUID to
be byte-swapped. This means it can't be used when the UUID
to be swapped is in a packed member of a struct. It's also
out of line with the general bswap*() functions we provide
in bswap.h, which take the value to be swapped and return it.
Make qemu_uuid_bswap() take a QemuUUID and return the swapped version.
This fixes some clang warnings about taking the address of
a packed struct member in block/vdi.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the complexity of milkymist_tmu2_create() into the
source file. Doing so we avoid to include the X11/OpenGL
headers in all LM32 devices, and we also avoid the duplicate
declaration of glx_fbconfig_attr[] (it is already declared
in hw/display/milkymist-tmu2.c).
Since TYPE_MILKYMIST_TMU2 is now accessible, use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-5-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcUkaiAAoJEPQH2wBh1c9AHsEIAIU0+FNjtdz7lNgyeBCSFCFa
/qWNk4+w6QBfhTTx/N0hGwh5/FvNYQhby8VHtZitE4/QcLbJwHYgWf14pwce3tP3
3qNB87AdQpKMpbajQM2x2Xy8lnlPeM7fe21Q/12vuX7AlEDT3gH+W9rg94bw2oFN
r+xBk6H5F2aVElw3CwMM7eary4+dPnnCQwAnoqM+g5hdpL+0scrIyARGw7v0hmSn
LDWESCM4a55lEYmwj1wS3J3uj6Fj00yzBvcEuCcT1GO+lXlV8/ciO9r2HqxVKwgz
4GAi/BERoMKjfn+/77/yI5flprPx2voNGgkyBY4C3z9ncnN6u02QBZSusBIWpSg=
=Kt4r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2019-01-31' into staging
Block patches:
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
# gpg: Signature made Thu 31 Jan 2019 00:51:46 GMT
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/xanclic/tags/pull-block-2019-01-31:
iotests: Allow 147 to be run concurrently
iotests: Bind qemu-nbd to localhost in 147
iotests.py: Add qemu_nbd_pipe()
nvme: use pci_dev directly in nvme_realize
nvme: ensure the num_queues is not zero
nvme: use TYPE_NVME instead of constant string
qemu-io: Add generic function for reinitializing optind.
block/sheepdog: Convert from DPRINTF() macro to trace events
block/file-posix: Convert from DPRINTF() macro to trace events
block/curl: Convert from DPRINTF() macro to trace events
block/ssh: Convert from DPRINTF() macro to trace events
scripts: add render_block_graph function for QEMUMachine
qapi: add x-debug-query-block-graph
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On FreeBSD 11.2:
$ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd'
Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write
After main option parsing, we reinitialize optind so we can parse each
command. However reinitializing optind to 0 does not work on FreeBSD.
What happens when you do this is optind remains 0 after the option
parsing loop, and the result is we try to parse argv[optind] ==
argv[0] == "aio_write" as if it was the first parameter.
The FreeBSD manual page says:
In order to use getopt() to evaluate multiple sets of arguments, or to
evaluate a single set of arguments multiple times, the variable optreset
must be set to 1 before the second and each additional set of calls to
getopt(), and the variable optind must be reinitialized.
(From the rest of the man page it is clear that optind must be
reinitialized to 1).
The glibc man page says:
A program that scans multiple argument vectors, or rescans the same
vector more than once, and wants to make use of GNU extensions such as
'+' and '-' at the start of optstring, or changes the value of
POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting
optind to 0, rather than the traditional value of 1. (Resetting to 0
forces the invocation of an internal initialization routine that
rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.)
This commit introduces an OS-portability function called
qemu_reset_optind which provides a way of resetting optind that works
on FreeBSD and platforms that use optreset, while keeping it the same
as now on other platforms.
Note that the qemu codebase sets optind in many other places, but in
those other places it's setting a local variable and not using getopt.
This change is only needed in places where we are using getopt and the
associated global variable optind.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190118101114.11759-2-rjones@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a new command, returning block nodes (and their users) graph.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181221170909.25584-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some files claim that the code is licensed under the GPL, but then
suddenly suggest that the user should have a look at the LGPL.
That's of course non-sense, replace it with the correct GPL wording
instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548255083-8190-1-git-send-email-thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
apci_1_compatible should be acpi_1_compatible.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190125094047.22276-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Include the cluster number in the hash we use to look
up TBs. This is important because a TB that is valid
for one cluster at a given physical address and set
of CPU flags is not necessarily valid for another:
the two clusters may have different views of physical
memory, or may have different CPU features (eg FPU
present or absent).
We put the cluster number in the high 8 bits of the
TB cflags. This gives us up to 256 clusters, which should
be enough for anybody. If we ever need more, or need
more bits in cflags for other purposes, we could make
tb_hash_func() take more data (and expand qemu_xxhash7()
to qemu_xxhash8()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190121152218.9592-4-peter.maydell@linaro.org
For TCG we want to distinguish which cluster a CPU is in, and
we need to do it quickly. Cache the cluster index in the CPUState
struct, by having the cluster object set cpu->cluster_index for
each CPU child when it is realized.
This means that board/SoC code must add all CPUs to the cluster
before realizing the cluster object. Regrettably QOM provides no
way to prevent adding children to a realized object and no way for
the parent to be notified when a new child is added to it, so
we don't have any way to enforce/assert this constraint; all
we can do is document it in a comment. We can at least put in a
check that the cluster contains at least one CPU, which should
catch the typical cases of "realized cluster too early" or
"forgot to parent the CPUs into it".
The restriction on how many clusters can exist in the system
is imposed by TCG code which will be added in a subsequent commit,
but the check to enforce it in cluster.c fits better in this one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190121152218.9592-3-peter.maydell@linaro.org
The m25p80 models dummy cycles using byte transfers. This works well
when the transfers are initiated by the QEMU model of a SPI controller
but when these are initiated by the OS, it breaks emulation.
Snoop the SPI transfer to catch commands requiring dummy cycles and
replace them with byte transfers compatible with the m25p80 model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20190124140519.13838-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ROM devices go via MemoryRegionOps->write() callbacks for write
operations and do not dirty/invalidate that memory. Device emulation
must be able to mark memory ranges that have been modified internally
(e.g. using memory_region_get_ram_ptr()).
Introduce the memory_region_flush_rom_device() API for this purpose.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190123212234.32068-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fix block comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Recent microbit firmwares panic if the TWI magnetometer/accelerometer
devices are not detected during startup. We don't implement TWI (I2C)
so let's stub out these devices just to let the firmware boot.
Signed-off by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190110094020.18354-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MX interrupt controller is a collection of the following devices
accessible through the external registers interface:
- interrupt distributor can route each external IRQ line to the
corresponding external IRQ pin of selected subset of connected xtensa
cores. It has per-CPU and per-IRQ enable signals and per-IRQ software
assert signals;
- IPI controller has 16 per-CPU IPI signals that may be routed to a
combination of 3 designated external IRQ pins of connected xtensa
cores;
- cache coherecy register controls core L1 cache participation in the
SMP cluster cache coherency protocol;
- runstall register lets BSP core stall and unstall AP cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disabled in all TCG backends for now.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The device is called via-ide and the modelled IDE controller is not
specific to 82C686B but is also usable independently. Therefore, change
function name prefixes accordingly to match device name.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 2905ced862c8d2ad509d73152171ce2472d72605.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
Now that no CMD646 specific parts are left in CMD646BAR (all remaining
members are really PCI IDE specific) this struct can be deleted moving
the memory regions for PCI IDE BARs to PCIIDEState where they better
belong. The CMD646 PCI IDE model is adjusted accordingly.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 4b6cb2ae150dc0d21178209e4beb1e35140a7325.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
The io mem ops callbacks are not specific to CMD646 but really follow
the PCI IDE spec so move these from cmd646.c to pci.c to allow other
PCI IDE implementations to use them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: a2b1b2b74afdc78330b8b75605687f683a249635.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
The cmd646 io mem ops callbacks only need the IDEBus which is
currently passed via a CMD646BAR struct. No need to wrap it up like
that, we can pass it directly to these callbacks which then allows to
drop the IDEBus from the CMD646BAR.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 7a31c155c9899869794499d841d30c7ef32aae47.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
There was a pointer to PCIIDEState in CMD646BAR which was set but
not used afterwards. Get rid of this unused variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1e352f091aa601fb2e19771aac46529fe278dd91.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>
New pages-per-second stat, a new test, and a bunch
of fixes and tidy ups.
-----BEGIN PGP SIGNATURE-----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=xxTj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190123a' into staging
Migration pull 2019-01-23
New pages-per-second stat, a new test, and a bunch
of fixes and tidy ups.
# gpg: Signature made Wed 23 Jan 2019 15:54:48 GMT
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190123a:
migration: introduce pages-per-second
vmstate: constify SaveVMHandlers
tests: add /vmstate/simple/array
migration/rdma: unregister fd handler
migration: unify error handling for process_incoming_migration_co
migration: add more error handling for postcopy_ram_enable_notify
migration: multifd_save_cleanup() can't fail, simplify
migration: fix the multifd code when receiving less channels
Fix segmentation fault when qemu_signal_init fails
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The following QMP command leads to a crash when iothreads are used:
{ 'execute': 'device_del', 'arguments': {'id': 'data'} }
The backtrace involves the queue restart coroutine where
tgm->throttle_state is a NULL pointer because
throttle_group_unregister_tgm() has already been called:
(gdb) bt full
#0 0x00005585a7a3b378 in qemu_mutex_lock_impl (mutex=0xffffffffffffffd0, file=0x5585a7bb3d54 "block/throttle-groups.c", line=412) at util/qemu-thread-posix.c:64
err = <optimized out>
__PRETTY_FUNCTION__ = "qemu_mutex_lock_impl"
__func__ = "qemu_mutex_lock_impl"
#1 0x00005585a79be074 in throttle_group_restart_queue_entry (opaque=0x5585a9de4eb0) at block/throttle-groups.c:412
_f = <optimized out>
data = 0x5585a9de4eb0
tgm = 0x5585a9079440
ts = 0x0
tg = 0xffffffffffffff98
is_write = false
empty_queue = 255
This coroutine should not execute in the iothread after the throttle
group member has been unregistered!
The root cause is that the device_del code path schedules the restart
coroutine in the iothread while holding the AioContext lock. Therefore
the iothread cannot execute the coroutine until after device_del
releases the lock - by this time it's too late.
This patch adds a reference count to ThrottleGroupMember so we can
synchronously wait for restart coroutines to complete. Once they are
done it is safe to unregister the ThrottleGroupMember.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190114133257.30299-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qapi_event_send_FOO() functions emit events like this:
QMPEventFuncEmit emit;
emit = qmp_event_get_func_emit();
if (!emit) {
return;
}
qmp = qmp_event_build_dict("FOO");
[put event arguments into @qmp...]
emit(QAPI_EVENT_FOO, qmp);
The value of qmp_event_get_func_emit() depends only on the program:
* In qemu-system-FOO, it's always monitor_qapi_event_queue.
* In tests/test-qmp-event, it's always event_test_emit.
* In all other programs, it's always null.
This is exactly the kind of dependence the linker is supposed to
resolve; we don't actually need an indirection.
Note that things would fall apart if we linked more than one QAPI
schema into a single program: each set of qapi_event_send_FOO() uses
its own event enumeration, yet they share a single emit function.
Which takes the event enumeration as an argument. Which one if
there's more than one?
More seriously: how does this work even now? qemu-system-FOO wants
QAPIEvent, and passes a function taking that to
qmp_event_set_func_emit(). test-qmp-event wants test_QAPIEvent, and
passes a function taking that to qmp_event_set_func_emit().
It works by type trickery, of course:
typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict);
void qmp_event_set_func_emit(QMPEventFuncEmit emit);
QMPEventFuncEmit qmp_event_get_func_emit(void);
We use unsigned instead of the enumeration type. Relies on both
enumerations boiling down to unsigned, which happens to be true for
the compilers we use.
Clean this up as follows:
* Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit()
instead of the value of qmp_event_set_func_emit().
* Generate a prototype for PREFIX_qapi_event_emit() into
qapi-events.h.
* PREFIX_ is empty for qapi/qapi-schema.json, and test_ for
tests/qapi-schema/qapi-schema-test.json. It's qga_ for
qga/qapi-schema.json, and doc-good- for
tests/qapi-schema/doc-good.json, but those don't define any events.
* Rename monitor_qapi_event_queue() to qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
qemu-system-FOO.
* Rename event_test_emit() to test_qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
tests/test-qmp-event.
* Add a qapi_event_emit() that does nothing to stubs/monitor.c. This
takes care of all other programs that link code emitting QMP events.
* Drop qmp_event_set_func_emit(), qmp_event_get_func_emit().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Commit message typos fixed]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114133139.27346-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Clang v7.0.1 does not like the __int128 variable type for inline
assembly on s390x:
In file included from fpu/softfloat.c:97:
include/fpu/softfloat-macros.h:647:9: error: inline asm error:
This value type register class is not natively supported!
asm("dlgr %0, %1" : "+r"(n) : "r"(d));
^
Disable this code part there now when compiling with Clang, so that
the generic code gets used instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Clang version 3.4.2 does not know the -Wpragmas option yet and bails
out with an error when we try to disable it in linux-user/qemu.h.
Fortunately, clang has a __has_warning() macro which allows us to add
an explicit check for the option that we want to ignore. With that we
can check for the availability of "-Waddress-of-packed-member" properly
and do not need the "-Wpragmas" at all here.
Fixes: 850d5e330a
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 2974e916df introduced the VirtioNetRscChain structure which
refer to a VirtIONet, declared later, thus required VirtIONet typedef
to use a forward declaration.
However, when compiling with Clang in -std=gnu99 mode, this triggers
the following warning/error:
CC hw/net/virtio-net.o
In file included from qemu/hw/net/virtio-net.c:22:
include/hw/virtio/virtio-net.h:189:3: error: redefinition of typedef 'VirtIONet' is a C11 feature [-Werror,-Wtypedef-redefinition]
} VirtIONet;
^
include/hw/virtio/virtio-net.h:110:26: note: previous definition is here
typedef struct VirtIONet VirtIONet;
^
1 error generated.
make: *** [rules.mak:69: hw/net/virtio-net.o] Error 1
Fix it by removing the duplicate typedef definition.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the ppc code with clang and -std=gnu99, there are a
couple of warnings/errors like this one:
CC ppc64-softmmu/hw/intc/xics.o
In file included from hw/intc/xics.c:35:
include/hw/ppc/xics.h:43:25: error: redefinition of typedef 'ICPState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct ICPState ICPState;
^
target/ppc/cpu.h:1181:25: note: previous definition is here
typedef struct ICPState ICPState;
^
Work around the problems by including the proper headers in spapr.h
and by using struct forward declarations in cpu.h.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling with Clang in -std=gnu99 mode, there is a warning/error:
CC ppc64-softmmu/hw/intc/xics_spapr.o
In file included from /home/thuth/devel/qemu/hw/intc/xics_spapr.c:34:
/home/thuth/devel/qemu/include/hw/ppc/xics.h:203:34: error: redefinition of typedef 'sPAPRMachineState' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct sPAPRMachineState sPAPRMachineState;
^
/home/thuth/devel/qemu/include/hw/ppc/spapr_irq.h:25:34: note: previous definition is here
typedef struct sPAPRMachineState sPAPRMachineState;
^
We have to remove the duplicated typedef here and include "spapr.h" instead.
But "spapr.h" should not be included for the pnv machine files. So move
the spapr-related prototypes into a new file called "xics_spapr.h" instead.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Header files requiring PixelFormat already include "ui/qemu-pixman.h".
To clean "qemu/typedefs.h", move the declaration to "ui/qemu-pixman.h"
(removing the forward declaration).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Header files requiring MouseTransformInfo already include "ui/console.h".
To clean "qemu/typedefs.h", move the declaration to "ui/console.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring DisplayState/DisplaySurface already include "ui/console.h".
To clean "qemu/typedefs.h", move the declarations to "ui/console.h"
(removing DisplaySurface forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring QemuDmaBuf already include "ui/console.h".
To clean "qemu/typedefs.h", move the declaration to "ui/console.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring AudioState already include "audio_int.h".
To clean "qemu/typedefs.h", move the declaration to "audio_int.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring PCMachineClass already include "hw/i386/pc.h".
To clean "qemu/typedefs.h", move the declaration to "hw/i386/pc.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring SerialState already include "hw/char/serial.h".
To clean "qemu/typedefs.h", move the declaration to "hw/char/serial.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring HCIInfo already include "sysemu/bt.h".
To clean "qemu/typedefs.h", move the declaration to "sysemu/bt.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring SMBusDevice already include "hw/i2c/smbus.h".
To clean "qemu/typedefs.h", move the forward declaration
to "hw/i2c/smbus.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Files requiring AllwinnerAHCIState already include "hw/ide/ahci.h".
To clean "qemu/typedefs.h", move the declaration to "hw/ide/ahci.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is only one header file requiring this typedef (hw/arm/pxa.h),
let it include "hw/pcmcia.h" directly to simplify "qemu/typedefs.h".
To clean "qemu/typedefs.h", move the declaration to "hw/pcmcia.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: slightly tweaked commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
PS2State is only used in "hw/input/ps2.h", there is no
need to expose it via "qemu/typedefs.h".
To clean "qemu/typedefs.h", move the forward declaration
to "hw/input/ps2.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to be able to detect whether a given qemu NBD server is
exposing the right export(s) and dirty bitmaps, at least for
regression testing. We could use 'nbd-client -l' from the upstream
NBD project to list exports, but it's annoying to rely on
out-of-tree binaries; furthermore, nbd-client doesn't necessarily
know about all of the qemu NBD extensions. Thus, we plan on adding
a new mode to qemu-nbd that merely sniffs all possible information
from the server during handshake phase, then disconnects and dumps
the information.
This patch continues the work of the previous patch, by adding the
ability to track the list of available meta contexts into
NBDExportInfo. It benefits from the recent refactoring patches
with a new nbd_list_meta_contexts() that reuses much of the same
framework as setting a meta context.
Note: a malicious server could exhaust memory of a client by feeding
an unending loop of contexts; perhaps we could place a limit on how
many we are willing to receive. But this is no different from our
earlier analysis on a server sending an unending list of exports,
and the death of a client due to memory exhaustion when the client
was going to exit soon anyways is not really a denial of service
attack.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-19-eblake@redhat.com>
We want to be able to detect whether a given qemu NBD server is
exposing the right export(s) and dirty bitmaps, at least for
regression testing. We could use 'nbd-client -l' from the upstream
NBD project to list exports, but it's annoying to rely on
out-of-tree binaries; furthermore, nbd-client doesn't necessarily
know about all of the qemu NBD extensions. Thus, we plan on adding
a new mode to qemu-nbd that merely sniffs all possible information
from the server during handshake phase, then disconnects and dumps
the information.
This patch adds the low-level client code for grabbing the list
of exports. It benefits from the recent refactoring patches, in
order to share as much code as possible when it comes to doing
validation of server replies. The resulting information is stored
in an array of NBDExportInfo which has been expanded to any
description string, along with a convenience function for freeing
the list.
Note: a malicious server could exhaust memory of a client by feeding
an unending loop of exports; perhaps we should place a limit on how
many we are willing to receive. But note that a server could
reasonably be serving an export for every file in a large directory,
where an arbitrary limit in the client means we can't list anything
from such a server; the same happens if we just run until the client
fails to malloc() and thus dies by an abort(), where the limit is
no longer arbitrary but determined by available memory. Since the
client is already planning on being short-lived, it's hard to call
this a denial of service attack that would starve off other uses,
so it does not appear to be a security issue.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-18-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Pass 'info' instead of three separate parameters related to info,
when requesting the server to set the meta context. Update the
NBDExportInfo struct to rename the received id field to match the
fact that we are currently overloading the field to match whatever
context the user supplied through the x-dirty-bitmap hack, as well
as adding a TODO comment to remind future patches about a desire
to request two contexts at once.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-11-eblake@redhat.com>
Refactor the 'name' parameter of nbd_receive_negotiate() from
being a separate parameter into being part of the in-out 'info'.
This also spills over to a simplification of nbd_opt_go().
The main driver for this refactoring is that an upcoming patch
would like to add support to qemu-nbd to list information about
all exports available on a server, where the name(s) will be
provided by the server instead of the client. But another benefit
is that we can now allow the client to explicitly specify the
empty export name "" even when connecting to an oldstyle server
(even if qemu is no longer such a server after commit 7f7dfe2a).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-10-eblake@redhat.com>
Although our compile-time environment is set up so that we always
support long files with 64-bit off_t, we have no guarantee whether
off_t is the same type as int64_t. This requires casts when
printing values, and prevents us from directly using qemu_strtoi64()
(which will be done in the next patch). Let's just flip to uint64_t
where possible, and stick to int64_t for detecting failure of
blk_getlength(); we also keep the assertions added in the previous
patch that the resulting values fit in 63 bits. The overflow check
in nbd_co_receive_request() was already sane (request->from is
validated to fit in 63 bits, and request->len is 32 bits, so the
addition can't overflow 64 bits), but rewrite it in a form easier
to recognize as a typical overflow check.
Rename the variable 'description' to keep line lengths reasonable.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190117193658.16413-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcQfb3AAoJENSXKoln91plXOkH/Rb+3IUi3ziXLaIo18fvMYcO
PY4cT/+3Lv9a8aa3/L1QFEYjI8Mu5s8MCQbQbOckifnusPao4bCHrVzhnwrchelb
DnkccwJcbyMkPAB2EqsUDNIRLiA6EmaXu4d9ve8HEo4mB3uy/OcOUo6YtotaPuV6
Z9kAyS1lnXOkrlbWU0ZgmEvvw8Mhs/XED3HOtzPpfrOVKnpObPqdMLPsVLqC761k
LZ6vbrjo2ELBwp+3WVaXDmLrNLF/qXd3NyFKPQ+EI8q3o7+7OpBptXOkuwT9CvAy
NzAMBFAIsKo90C1PD5hzlyYeoaEkyGBR0Uquiz+FkxUr9NuKs40qOEEjwd5njPg=
=q6sK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-january-17-2019-v2' into staging
MIPS queue for January 17, 2019 - v2
# gpg: Signature made Fri 18 Jan 2019 15:55:35 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-january-17-2019-v2:
target/mips: Introduce 32 R5900 multimedia registers
target/mips: Rename 'rn' to 'register_name'
target/mips: Add CP0 register MemoryMapID
target/mips: Amend preprocessor constants for CP0 registers
target/mips: Update ITU to handle bus errors
target/mips: Update ITU to utilize SAARI and SAAR CP0 registers
target/mips: Add field and R/W access to ITU control register ICR0
target/mips: Provide R/W access to SAARI and SAAR CP0 registers
target/mips: Add fields for SAARI and SAAR CP0 registers
target/mips: Use preprocessor constants for 32 major CP0 registers
target/mips: Add preprocessor constants for 32 major CP0 registers
target/mips: Move comment containing summary of CP0 registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In some cases it may be helpful to modify state before saving it for
migration, and then modify the state back after it has been saved. The
existing pre_save function provides half of this functionality. This
patch adds a post_save function to provide the second half.
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20181211151945.29137-2-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's report IO-coherent access is supported for translation
table walks, descriptor fetches and queues by setting the COHACC
override flag. Without that, we observe wrong command opcodes.
The DT description also advertises the dma coherency.
Fixes a703b4f6c1 ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20190107101041.765-1-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It was assumed that mesa provides the necessary X11 includes,
but it is not always the case, as it can be configured without x11 support.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190116113751.17177-1-alex.kanavin@gmail.com
[ kraxel: codestyle fix (long line) ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Modern desktop environments can render icons at very large sizes,
especially with high DPI screens. Providing a 32x32 pixel bitmap is
nowhere near sufficient anymore.
When displayed in GNOME shell the QEMU icon looks awful, having been
scaled up to at least x4 its base size. This is compounded by the fact
that the BMP file doesn't do transparency, so while we've removed white
pixels, we still have anti-aliased nearly-white pixels which make the
logo look appalling on black backgrounds.
Loading a high resolution PNG icon addresses both problems, but requires
use of the extra SDL2_image library.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Update ITU to utilize SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add field and R/W access to ITU control register ICR0.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcQTW/AAoJECgfDbjSjVRpY34H/0wniUqht3CVVihAfC9qnL7N
jgAJ41OGgrrCmXLrwa5P5iWxIKRjp2Odo7DQ2dl+9sqYshe6WoBBXmqEa8bDeldE
69EJ3xSnZjkpScqXKoSaDO3dtibUGpdvlTKpjuh7q2FFBOvNvf3hQubhyt/vINsO
qoDMqycjXJkHSaZLfdNb3P/LAkAuHI4veNk8KEbog3XTijSUbZlb2GYc8vT/agka
0SldiEVi9CTIh7co0L2BkcLVeTMVrF3OZuWDek3tVHXPxPaNbQM3GMvHZaxqZusU
SZinnNhcnI++kgLZVHuurxo7e1S9d8Oy0QuHGX8CZ1sfeqy3vzxer0Hbb7BdLIY=
=GhIM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Jan 2019 02:11:11 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (49 commits)
migration: Use strnlen() for fixed-size string
migration: Fix stringop-truncation warning
hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arrays
block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays
qemu/compiler: Define QEMU_NONSTRING
acpi: update expected files
hw: acpi: Fix memory hotplug AML generation error
tpm: clear RAM when "memory overwrite" requested
acpi: add ACPI memory clear interface
acpi: build TPM Physical Presence interface
acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
tpm: allocate/map buffer for TPM Physical Presence interface
tpm: add a "ppi" boolean property
hw/misc/edu: add msi_uninit() for pci_edu_uninit()
virtio: Make disable-legacy/disable-modern compat properties optional
globals: Allow global properties to be optional
virtio: virtio 9p really requires CONFIG_VIRTFS to work
virtio: split virtio crypto bits from virtio-pci.h
virtio: split virtio gpu bits from virtio-pci.h
virtio: split virtio serial bits from virtio-pci
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GCC 8 added a -Wstringop-truncation warning:
The -Wstringop-truncation warning added in GCC 8.0 via r254630 for
bug 81117 is specifically intended to highlight likely unintended
uses of the strncpy function that truncate the terminating NUL
character from the source string.
This new warning leads to compilation failures:
CC hw/acpi/core.o
In function 'acpi_table_install', inlined from 'acpi_table_add' at qemu/hw/acpi/core.c:296:5:
qemu/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
make: *** [qemu/rules.mak:69: hw/acpi/core.o] Error 1
Use the QEMU_NONSTRING attribute, since ACPI tables don't require the
strings to be NUL-terminated.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
GCC 8 introduced the -Wstringop-truncation checker to detect truncation by
the strncat and strncpy functions (closely related to -Wstringop-overflow,
which detect buffer overflow by string-modifying functions declared in
<string.h>).
In tandem of -Wstringop-truncation, the "nonstring" attribute was added:
The nonstring variable attribute specifies that an object or member
declaration with type array of char, signed char, or unsigned char,
or pointer to such a type is intended to store character arrays that
do not necessarily contain a terminating NUL. This is useful in detecting
uses of such arrays or pointers with functions that expect NUL-terminated
strings, and to avoid warnings when such an array or pointer is used as
an argument to a bounded string manipulation function such as strncpy.
From the GCC manual: https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html#index-nonstring-variable-attribute
Add the QEMU_NONSTRING macro which checks if the compiler supports this
attribute.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The TPM Physical Presence interface consists of an ACPI part, a shared
memory part, and code in the firmware. Users can send messages to the
firmware by writing a code into the shared memory through invoking the
ACPI code. When a reboot happens, the firmware looks for the code and
acts on it by sending sequences of commands to the TPM.
This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't
assume that SMIs are necessary to use. It uses a similar datastructure for
the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use
of it. I extended the shared memory data structure with an array of 256
bytes, one for each code that could be implemented. The array contains
flags describing the individual codes. This decouples the ACPI implementation
from the firmware implementation.
The underlying TCG specification is accessible from the following page.
https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/
This patch implements version 1.30.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André - ACPI code improvements and windows fixes ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid having to hard code the base address of the PPI virtual
memory device we introduce a fw_cfg file etc/tpm/config that holds the
base address of the PPI device, the version of the PPI interface and
the version of the attached TPM.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André: renamed to etc/tpm/config, made it static, document it ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement a virtual memory device for the TPM Physical Presence interface.
The memory is located at 0xFED45000 and used by ACPI to send messages to the
firmware (BIOS) and by the firmware to provide parameters for each one of
the supported codes.
This interface should be used by all TPM devices on x86 and can be
added by calling tpm_ppi_init_io().
Note: bios_linker cannot be used to allocate the PPI memory region,
since the reserved memory should stay stable across reboots, and might
be needed before the ACPI tables are installed.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Making some global properties optional will let us simplify
compat code when a given property works on most (but not all)
subclasses of a given type.
Device types will be able to opt out from optional compat
properties by simply not registering those properties.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds implementation of RX packets
coalescing, compatible with requirements of Windows
Hardware compatibility kit.
The device enables feature VIRTIO_NET_F_RSC_EXT in
host features if it supports extended RSC functionality
as defined in the specification.
This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4,
VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks
this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS
is also present.
If the guest driver acks VIRTIO_NET_F_RSC_EXT feature,
the device coalesces TCPv4 and TCPv6 packets (if
respective VIRTIO_NET_F_GUEST_TSO feature is on,
populates extended RSC information in virtio header
and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags.
The device does not recalculate checksums in the coalesced
packet, so they are not valid.
In this case:
All the data packets in a tcp connection are cached
to a single buffer in every receive interval, and will
be sent out via a timer, the 'virtio_net_rsc_timeout'
controls the interval, this value may impact the
performance and response time of tcp connection,
50000(50us) is an experience value to gain a performance
improvement, since the whql test sends packets every 100us,
so '300000(300us)' passes the test case, it is the default
value as well, tune it via the command line parameter
'rsc_interval' within 'virtio-net-pci' device, for example,
to launch a guest with interval set as '500000':
'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00,
guest_rsc_ext=on,rsc_interval=500000'
The timer will only be triggered if the packets pool is not empty,
and it'll drain off all the cached packets.
'NetRscChain' is used to save the segments of IPv4/6 in a
VirtIONet device.
A new segment becomes a 'Candidate' as well as it passed sanity check,
the main handler of TCP includes TCP window update, duplicated
ACK check and the real data coalescing.
An 'Candidate' segment means:
1. Segment is within current window and the sequence is the expected one.
2. 'ACK' of the segment is in the valid window.
Sanity check includes:
1. Incorrect version in IP header
2. An IP options or IP fragment
3. Not a TCP packet
4. Sanity size check to prevent buffer overflow attack.
5. An ECN packet
Even though, there might more cases should be considered such as
ip identification other flags, while it breaks the test because
windows set it to the same even it's not a fragment.
Normally it includes 2 typical ways to handle a TCP control flag,
'bypass' and 'finalize', 'bypass' means should be sent out directly,
while 'finalize' means the packets should also be bypassed, but this
should be done after search for the same connection packets in the
pool and drain all of them out, this is to avoid out of order fragment.
All the 'SYN' packets will be bypassed since this always begin a new'
connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a
finalization, because this normally happens upon a connection is going
to be closed, an 'URG' packet also finalize current coalescing unit.
Statistics can be used to monitor the basic coalescing status, the
'out of order' and 'out of window' means how many retransmitting packets,
thus describe the performance intuitively.
Difference between ip v4 and v6 processing:
Fragment length in ipv4 header includes itself, while it's not
included for ipv6, thus means ipv6 can carry a real 65535 payload.
Note that main goal of implementing this feature in software
is to create reference setup for certification tests. In such
setups guest migration is not required, so the coalesced packets
not yet delivered to the guest will be lost in case of migration.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit a33fbb4f8b.
The functionality is unused.
Note: in addition to automatic revert, drop second parameter in
hbitmap_iter_next() call from hbitmap_next_dirty_area() too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This reverts commit 72d10a9421.
The function is unused now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The function alters bdrv_dirty_iter_next_area(), which is wrong and
less efficient (see further commit
"block/mirror: fix and improve do_sync_target_write" for description).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Promote bitmap/NBD interfaces to stable for use in incremental
backups. Add 'qemu-nbd --bitmap'.
- John Snow: 0/11 bitmaps: remove x- prefix from QMP api
- Philippe Mathieu-Daudé: qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
- Eric Blake: 0/8 Promote x-nbd-server-add-bitmap to stable
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJcPLU5AAoJEKeha0olJ0Nqt4AH/2JXm2Ky9lth8QdVzPodh0cl
xeBteQ51LVjneAlQuT5u5LR6+0ujljVCDUPaUfAcxhWJagofzPVIdSe+kOnQEtgN
e7zf1pFxvLkITTl2iu0/HFxBz1pJb+ZayZqZ5zOHfj7LVSafwNC7MbW/t5yueiXl
fPbxZqF4+C7lN9woS4p6zgB5berQuWHdHxsLLbkxFigr9JRiH3t8qm1tsa0nd/AZ
uCyVAzqxFBkchh86uZ8TisUU7XqR+ab99/feOEkMWj2ctra7HfkJeCkPOZialzOS
5A4UBZSDzCwr10NtHBMQhvSmvBFghm4L3u9faejg81TTTpbIQtcUoXu+ClGIHVM=
=cYBw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-14' into staging
nbd patches for 2019-01-14
Promote bitmap/NBD interfaces to stable for use in incremental
backups. Add 'qemu-nbd --bitmap'.
- John Snow: 0/11 bitmaps: remove x- prefix from QMP api
- Philippe Mathieu-Daudé: qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
- Eric Blake: 0/8 Promote x-nbd-server-add-bitmap to stable
# gpg: Signature made Mon 14 Jan 2019 16:13:45 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-01-14:
qemu-nbd: Add --bitmap=NAME option
nbd: Merge nbd_export_bitmap into nbd_export_new
nbd: Remove x-nbd-server-add-bitmap
nbd: Allow bitmap export during QMP nbd-server-add
nbd: Merge nbd_export_set_name into nbd_export_new
nbd: Only require disabled bitmap for read-only exports
nbd: Forbid nbd-server-stop when server is not running
nbd: Add some error case testing to iotests 223
qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
iotests: add iotest 236 for testing bitmap merge
iotests: implement pretty-print for log and qmp_log
iotests: change qmp_log filters to expect QMP objects only
iotests: remove default filters from qmp_log
iotests: add qmp recursive sorting function
iotests: add filter_generated_node_ids
iotests.py: don't abort if IMGKEYSECRET is undefined
block: remove 'x' prefix from experimental bitmap APIs
blockdev: n-ary bitmap merge
block/dirty-bitmap: remove assertion from restore
blockdev: abort transactions in reverse order
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We better stop right away. For now, errors would be partially ignored
(so the guest might get informed or the device might get unplugged),
although actual plug/unplug will be reported as failed to the user.
While at it, properly move the check to the pre_plug handler for the plug
case, as we can test the slot state before the device will be realized.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We only have one caller that wants to export a bitmap name,
which it does right after creation of the export. But there is
still a brief window of time where an NBD client could see the
export but not the dirty bitmap, which a robust client would
have to interpret as meaning the entire image should be treated
as dirty. Better is to eliminate the window entirely, by
inlining nbd_export_bitmap() into nbd_export_new(), and refusing
to create the bitmap in the first place if the requested bitmap
can't be located.
We also no longer need logic for setting a different bitmap
name compared to the bitmap being exported.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-8-eblake@redhat.com>
The existing NBD code had a weird split where nbd_export_new()
created an export but did not add it to the list of exported
names until a later nbd_export_set_name() came along and grabbed
a second reference on the object; later, the first call to
nbd_export_close() drops the second reference while removing
the export from the list. This is in part because the QAPI
NbdServerRemoveNode enum documents the possibility of adding a
mode where we could do a soft disconnect: preventing new clients,
but waiting for existing clients to gracefully quit, based on
the mode used when calling nbd_export_close().
But in spite of all that, note that we never change the name of
an NBD export while it is exposed, which means it is easier to
just inline the process of setting the name as part of creating
the export.
Inline the contents of nbd_export_set_name() and
nbd_export_set_description() into the two points in an export
lifecycle where they matter, then adjust both callers to pass
the name up front. Note that for creation, all callers pass a
non-NULL name, (passing NULL at creation was for old style
servers, but we removed support for that in commit 7f7dfe2a),
so we can add an assert and do things unconditionally; but for
cleanup, because of the dual nature of nbd_export_close(), we
still have to be careful to avoid use-after-free. Along the
way, add a comment reminding ourselves of the potential of
adding a middle mode disconnect.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-5-eblake@redhat.com>
xend have been replaced by libxenlight (libxl) for many Xen releases
now.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
It is broken since Xen 4.9 [1] and it will not build in Xen 4.12. Also,
it is not built by default since QEMU 2.6.
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-09/msg00313.html
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds create and destroy function for XenBlockDevice-s so that
they can be created automatically when the Xen toolstack instantiates a new
PV backend via xenstore. When the XenBlockDevice is created this way it is
also necessary to create a 'drive' which matches the configuration that the
Xen toolstack has written into xenstore. This is done by formulating the
parameters necessary for each 'blockdev' layer of the drive and then using
qmp_blockdev_add() to create the layers. Also, for compatibility with the
legacy 'xen_disk' implementation, an iothread is automatically created for
the new XenBlockDevice. This, like the driver layers, will be destroyed
after the XenBlockDevice is unrealized.
The legacy backend scan for 'qdisk' is removed by this patch, which makes
the 'xen_disk' code is redundant. The code will be removed by a subsequent
patch.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
...that maintains compatibility with existing Xen toolstacks.
Xen toolstacks instantiate PV backends by simply writing information into
xenstore and expecting a backend implementation to be watching for this.
This patch adds a new 'xen-backend' module to allow individual XenDevice
implementations to register create and destroy functions. The creator
will be called when a tool-stack instantiates a new backend in this way,
and the destructor will then be called after the resulting XenDevice
object is unrealized.
To support this it is also necessary to add new watchers into the XenBus
implementation to handle enumeration of new backends and also destruction
of XenDevice-s when the toolstack sets the backend 'online' key to 0.
NOTE: This patch only adds the framework. A subsequent patch will add a
creator function for xen-block devices.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
...and wire in the dataplane.
This patch adds the remaining code to make the xen-block XenDevice
functional. The parameters that a block frontend expects to find are
populated in the backend xenstore area, and the 'ring-ref' and
'event-channel' values specified in the frontend xenstore area are
mapped/bound and used to set up the dataplane.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The legacy PV backend infrastructure provides functions to bind, unbind
and send notifications to event channnels. Similar functionality will be
required by XenDevice implementations so this patch adds the necessary
support.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Patch squashed with:
Patch "xen: add event channel interface for XenDevice-s" makes use of
the type xenevtchn_port_or_error_t, but this isn't avaiable before Xen
4.7. Also the function xen_device_bind_event_channel assign the return
value of xenevtchn_bind_interdomain to channel->local_port but check the
result for error with xendev->local_port.
Fix by:
- removing local_port from struct XenDevice as it isn't use anywere.
- adding a compatibility typedef for xenevtchn_port_or_error_t for Xen
4.6 and earlier.
As extra, replace the type of XenEventChannel->local_port by
evtchn_port_t.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
The legacy PV backend infrastructure provides functions to map, unmap and
copy pages granted by frontends. Similar functionality will be required
by XenDevice implementations so this patch adds the necessary support.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
A Xen PV frontend communicates its state to the PV backend by writing to
the 'state' key in the frontend area in xenstore. It is therefore
necessary for a XenDevice implementation to be notified whenever the
value of this key changes.
This patch adds code to do this as follows:
- an 'fd handler' is registered on the libxenstore handle which will be
triggered whenever a 'watch' event occurs
- primitives are added to xen-bus-helper to add or remove watch events
- a list of Notifier objects is added to XenBus to provide a mechanism
to call the appropriate 'watch handler' when its associated event
occurs
The xen-block implementation is extended with a 'frontend_changed' method,
which calls as-yet stub 'connect' and 'disconnect' functions when the
relevant frontend state transitions occur. A subsequent patch will supply
a full implementation for these functions.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds a new source module, xen-bus-helper.c, which builds on
basic libxenstore primitives to provide functions to create (setting
permissions appropriately) and destroy xenstore areas, and functions to
'printf' and 'scanf' nodes therein. The main xen-bus code then uses
these primitives [1] to initialize and destroy the frontend and backend
areas for a XenDevice during realize and unrealize respectively.
The 'xen-block' implementation is extended with a 'get_name' method that
returns the VBD number. This number is required to 'name' the xenstore
areas.
NOTE: An exit handler is also added to make sure the xenstore areas are
cleaned up if QEMU terminates without devices being unrealized.
[1] The 'scanf' functions are actually not yet needed, but they will be
needed by code delivered in subsequent patches.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds new XenDevice-s: 'xen-disk' and 'xen-cdrom', both derived
from a common 'xen-block' parent type. These will eventually replace the
'xen_disk' (note the underscore rather than hyphen) legacy PV backend but
it is illustrative to build up the implementation incrementally, along with
the XenBus/XenDevice framework. Subsequent patches will therefore add to
these devices' implementation as new features are added to the framework.
After this patch has been applied it is possible to instantiate new
'xen-disk' or 'xen-cdrom' devices with a single 'vdev' parameter, which
accepts values adhering to the Xen VBD naming scheme [1]. For example, a
command-line instantiation of a xen-disk can be done with an argument
similar to the following:
-device xen-disk,vdev=hda
The implementation of the vdev parameter formulates the appropriate VBD
number for use in the PV protocol.
[1] https://xenbits.xen.org/docs/unstable/man/xen-vbd-interface.7.html
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds the basic boilerplate for a 'XenBus' object that will act
as a parent to 'XenDevice' PV backends.
A new 'XenBridge' object is also added to connect XenBus to the system bus.
The XenBus object is instantiated by a new xen_bus_init() function called
from the same sites as the legacy xen_be_init() function.
Subsequent patches will flesh-out the functionality of these objects.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
...and xen_backend.h to xen-legacy-backend.h
Rather than attempting to convert the existing backend infrastructure to
be QOM compliant (which would be hard to do in an incremental fashion),
subsequent patches will introduce a completely new framework for Xen PV
backends. Hence it is necessary to re-name parts of existing code to avoid
name clashes. The re-named 'legacy' infrastructure will be removed once all
backends have been ported to the new framework.
This patch is purely cosmetic. No functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
* esp bugfixes (Guenter)
* Windows build cleanup (Marc-André)
* checkpatch logic improvements (Paolo)
* coalesced range bugfix (Paolo)
* switch testsuite to TAP (Paolo)
* QTAILQ rewrite (Paolo)
* block/iscsi.c cancellation fixes (Stefan)
* improve selection of the default accelerator (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcOKyMAAoJEL/70l94x66DxKEH/1ho2Xl8ezxCecA6q3HqTgMT
NJ/ntdqQwVwekKOWzsywnM3/LkEDLH55MxbTeQ8M/Vb1seS8eROz24/gPTzvFrfR
n/d11rDV1EJfWe0H7nGLLFiRv0MSjxLpG9c3dlOKWhwOYHm25tr48PsdfVFP9Slz
BK3rwrMeDgArfptHAIsAXt2h1S0EzrG9pMwGDpErCDzziXxBhUESE0Iqfw8LsH1K
VjMn6rn7Ts1XKlxxwsm+BzHlTJghbj3tWPIfk+6uK2isP4iM3gFCoav3SG9XVXof
V9+vFyMxdtZKT/0HvajhUS4/1S/uGBNNchZRnCxXlpbueWc5ROtvarhM6Hb0eck=
=i8E5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* HAX support for Linux hosts (Alejandro)
* esp bugfixes (Guenter)
* Windows build cleanup (Marc-André)
* checkpatch logic improvements (Paolo)
* coalesced range bugfix (Paolo)
* switch testsuite to TAP (Paolo)
* QTAILQ rewrite (Paolo)
* block/iscsi.c cancellation fixes (Stefan)
* improve selection of the default accelerator (Thomas)
# gpg: Signature made Fri 11 Jan 2019 14:47:40 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (34 commits)
avoid TABs in files that only contain a few
remove space-tab sequences
scripts: add script to convert multiline comments into 4-line format
hw/watchdog/wdt_i6300esb: remove a unnecessary comment
checkpatch: warn about qemu/queue.h head structs that are not typedef-ed
qemu/queue.h: simplify reverse access to QTAILQ
qemu/queue.h: reimplement QTAILQ without pointer-to-pointers
qemu/queue.h: remove Q_TAILQ_{HEAD,ENTRY}
qemu/queue.h: typedef QTAILQ heads
qemu/queue.h: leave head structs anonymous unless necessary
vfio: make vfio_address_spaces static
qemu/queue.h: do not access tqe_prev directly
test: replace gtester with a TAP driver
test: execute g_test_run when tests are skipped
qga: drop < Vista compatibility
build-sys: build with Vista API by default
build-sys: move windows defines in osdep.h header
build-sys: don't include windows.h, osdep.h does it
scsi: esp: Defer command completion until previous interrupts have been handled
esp-pci: Fix status register write erase control
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QTAILQ is a doubly linked list, with a pointer-to-pointer to the last
element from the head, and the previous element from each node.
But if you squint enough, QTAILQ becomes a combination of a singly-linked
forwards list, and another singly-linked list which goes backwards and
is circular. This is the idea that lets QTAILQ implement reverse
iteration: only, because the backwards list points inside the node,
accessing the previous element needs to go two steps back and one
forwards.
What this patch does is implement it in these terms, without actually
changing the in-memory layout at all. The coexistence of the two lists
is realized by making QTAILQ_HEAD and QTAILQ_ENTRY unions of the forwards
pointer and a generic QTailQLink node. Thq QTailQLink can walk the list in
both directions; the union is needed so that the forwards pointer can
have the correct type, as a sort of poor man's template. While there
are other ways to get the same layout without a union, this one has
the advantage of simpler operation in the debugger, because the fields
tqh_first and tqe_next still exist as before the patch. Those fields are
also used by scripts/qemugdb/mtree.py, so it's a good idea to preserve them.
The advantage of the new representation is that the two-back-one-forward
dance done by backwards accesses can be done all while operating on
QTailQLinks. No casting to the head struct is needed anymore because,
even though the QTailQLink's forward pointer is a void *, we can use
typeof to recover the correct type. This patch only changes the
implementation, not the interface. The next patch will remove the head
struct name from the backwards visit macros.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are not present for other kinds of queue, and unused.
Zap them before more changes are made to the QTAILQ
implementation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be needed when we change the QTAILQ head and elem structs
to unions. However, it is also consistent with the usage elsewhere
in QEMU for other list head structs (see for example FsMountList).
Note that most QTAILQs only need their name in order to do backwards
walks. Those do not break with the struct->union change, and anyway
the change will also remove the need to name heads when doing backwards
walks, so those are not touched here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is not used outside hw/vfio/common.c, so it does not need to
be extern.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both qemu & qga build with Vista API by default already, by defining
_WIN32_WINNT 0x0600. Set it globally in osdep.h instead.
This replaces WINVER by _WIN32_WINNT in osdep.h. WINVER doesn't seem
to be really useful these days.
(see also https://blogs.msdn.microsoft.com/oldnewthing/20070411-00/?p=27283)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes some clutter in compilation logging, and allows some
easier tweaking per compilation unit/CFLAGS overriding.
Note that we can't move those define in os-win32.h, since they must be
set before the first system headers are included.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest OS reads RSTAT, RSEQ, and RINTR, and expects those registers
to reflect a consistent state. However, it is possible that the registers
can change after RSTAT was read, but before RINTR is read, when
esp_command_complete() is called.
Guest OS qemu
-------- ----
[handle interrupt]
Read RSTAT
esp_command_complete()
RSTAT = STAT_ST
esp_dma_done()
RSTAT |= STAT_TC
RSEQ = 0
RINTR = INTR_BS
Read RSEQ
Read RINTR RINTR = 0
RSTAT &= ~STAT_TC
RSEQ = SEQ_CD
The guest OS would then try to handle INTR_BS combined with an old
value of RSTAT. This sometimes resulted in lost events, spurious
interrupts, guest OS confusion, and stalled SCSI operations.
A typical guest error log (observed with various versions of Linux)
looks as follows.
scsi host1: Spurious irq, sreg=13.
...
scsi host1: Aborting command [84531f10:2a]
scsi host1: Current command [f882eea8:35]
scsi host1: Queued command [84531f10:2a]
scsi host1: Active command [f882eea8:35]
scsi host1: Dumping command log
scsi host1: ent[15] CMD val[44] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[00] event[0c]
scsi host1: ent[16] CMD val[01] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c]
scsi host1: ent[17] CMD val[43] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c]
scsi host1: ent[18] EVENT val[0d] sreg[92] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c]
...
Defer handling command completion until previous interrupts have been
handled to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When compiling with "--disable-tcg", we currently still use "tcg"
as default accelerator. "kvm" should be used in this case instead.
Also, some downstream distros provide QEMU binaries which have "kvm"
in their names (e.g. "qemu-kvm" on RHEL or "kvm" on Ubuntu) that use
KVM by default - and some users might want to do something similar
with upstream binaries, too. Accomodate them by using "kvm:tcg" as
default when we detect such a binary name.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538748792-19444-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to allocate mouse events using malloc, we can
allcoate them from stack instead, save a few cpu cycles and make the
code more readable with c99 initializers.
Suggested-by: FelixYao <felix.yzg@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181210140808.26794-1-kraxel@redhat.com
The qemu_create_display_surface_guestmem() function was added in
commit a77549b3ff but apparently never used. Remove it.
(The API of this function is in any case awkward as a generic
function: it assumes that a physical address uniquely identifies
a piece of memory in the system, which is mostly but not
always true.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181122170309.4856-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.
(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")
According to repology, all the distros that are build target platforms
for QEMU include it:
RHEL-7: 0.14.0
Debian (Stretch): 0.12.8
Debian (Jessie): 0.12.5
FreeBSD (ports): 0.14.0
OpenSUSE Leap 15: 0.14.0
Ubuntu (Xenial): 0.12.6
Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of verbose arrays with 4 lines for each entry, make each
entry take only one line. This makes long arrays that couldn't
fit in the screen become short and readable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-4-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The macro is only used in one place, where the purpose of the
value is obvious. Eliminate the macro so we don't need to rely
on stringify().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190107193020.21744-2-ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add some more functions that will be used in memory-device context.
range_init(): Init using lower bound and size, check for validity
range_init_nofail(): Init using lower bound and size, validity asserted
range_size(): Extract the size of a range
range_overlaps_range(): Check for overlaps of two ranges
range_contains_range(): Check if one range is contained in the other
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181214131043.25071-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make them more QOMConventional.
Cc:qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190105023831.66910-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QOM cpu.h uses fprintf_function which requires Qemu's
qemu/fprintf-fn.h header. Include it.
Signed-off-by: Priit Laes <plaes@plaes.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181226003722.31257-1-plaes@plaes.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the last time we sorted things (2988cbeaf), we've had a
few relapses that were inserted out of order. Also, we had more
entries that were sorted case-insensitively than not, so let's
document that convention and stick to it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181115211752.1295571-2-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Depending on the interrupt mode of the machine, enable or disable the
XIVE MMIOs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'dual' sPAPR IRQ backend supports both interrupt mode, XIVE
exploitation mode and the legacy compatibility mode (XICS). both modes
are not supported at the same time.
The machine starts with the legacy mode and a new interrupt mode can
then be negotiated by the CAS process. In this case, the new mode is
activated after a reset to take into account the required changes in
the machine. These impact the device tree layout, the interrupt
presenter object and the exposed MMIO regions in the case of XIVE.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit 15ed653fa4 ("ppc/xics: An ICS with offset 0 is assumed to be
uninitialized") introduced an extra check on the ICS offset which is
not strictly necessary.
Revert the change to be able to map the XICS IRQ number space on the
XIVE IRQ number space.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qemu_irq array is now allocated at the machine level using a sPAPR
IRQ set_irq handler depending on the chosen interrupt mode. The use of
this handler is slightly inefficient today but it will become necessary
when the 'dual' interrupt mode is introduced.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Future changes of the ICSState object will remove the qemu_irq array
from under the interrupt controller model. Prepare ground for the PSI
interrupt sources and introduce a new one directly under the PSI
device model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To support the 'dual' interrupt mode, XICS and XIVE, we plan to move
the qemu_irq array of each interrupt controller under the machine and
do the allocation under the sPAPR IRQ init method.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Today, the interrupt presenter is linked to a CPU using the
cpu_intc_create() method of the sPAPR IRQ backend. The resulting
object is assigned to the PowerPCCPU 'intc' pointer whatever the
interrupt mode, XICS or XIVE.
To support the 'dual' interrupt mode, we will need to distinguish
between the two presenter objects and for that, we plan to introduce a
second interrupt presenter object pointer under the PowerPCCPU. The
modifications below move the assignment of the presenter object under
the cpu_intc_create() method to prepare ground for the future changes.
Both sPAPR and PowerNV machines are impacted.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qirq routines of the XiveSource and the sPAPRXive model are only
used under the sPAPR IRQ backend. Simplify the overall call stack and
gather all the code under spapr_qirq_xive(). It will ease future
changes.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PHB hotplug will bring more users for it. Let's define it along with
the PHB defines from which it is derived for simplicity.
While here fix a misleading comment about manual placement, which was
abandoned with 30b3bc5aa9.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds cleanup counterparts to pci_register_root_bus(),
pci_root_bus_new(), and pci_bus_irqs().
These cleanup routines are needed in the case of hotpluggable
PCIHostBridge implementations. Currently we can rely on the
object_unparent()'ing of the PCIHostState recursively unparenting
and cleaning up it's child buses, but we need explicit calls
to also:
1) remove the PCIHostState from pci_host_bridges global list.
otherwise, we risk accessing freed memory when we access
the list later
2) clean up memory allocated in pci_bus_irqs()
Both are handled outside the context of any particular bus or
host bridge's init/realize functions, making it difficult to
avoid the need for explicit cleanup functions without remodeling
how PCIHostBridges are created. So keep it simple and just add
them for now.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is only used when creating the default PHB. Let's rename
it and move it to the core machine code for clarity.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF receives a device tree and updates it with various properties
before switching to the guest kernel and QEMU is not aware of any changes
made by SLOF. Since there is no real RTAS (QEMU implements it), it makes
sense to pass the SLOF final device tree to QEMU to let it implement
RTAS related tasks better, such as PCI host bus adapter hotplug.
Specifially, now QEMU can find out the actual XICS phandle (for PHB
hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
assisted NMI - FWNMI).
This stores the initial DT blob in the sPAPR machine and replaces it
in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.
This adds an @update_dt_enabled machine property to allow backward
migration.
SLOF already has a hypercall since
https://github.com/aik/SLOF/commit/e6fc84652c9c0073f9183
This makes use of the new fdt_check_full() helper. In order to allow
the configure script to pick the correct DTC version, this adjusts
the DTC presense test.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
H_HOME_NODE_ASSOCIATIVITY H-Call returns the associativity domain
designation associated with the identifier input parameter
This fixes a crash when we try to hotplug a CPU in memory-less and
CPU-less numa node. In this case, the kernel tries to online the
node, but without the information provided by this h-call, the node id,
it cannot and the CPU is started while the node is not onlined.
It also removes the warning message from the kernel:
VPHN is not supported. Disabling polling..
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is only needed when Q35 is in use. Moving it to
the same file that uses it lets you disable the entire USB
subsystem in x86_64-softmmu.mak; of course doing that will
cause -usb to break horribly, but one thing at a time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1545064358-4601-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=x1jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging
target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
# gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits)
Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.
hw/misc/tz-mpc: Fix value of BLK_MAX register
target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
arm: Add Clock peripheral stub to NRF51 SOC
tests/microbit-test: Add Tests for nRF51 Timer
arm: Instantiate NRF51 Timers
hw/timer/nrf51_timer: Add nRF51 Timer peripheral
tests/microbit-test: Add Tests for nRF51 GPIO
arm: Instantiate NRF51 general purpose I/O
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
arm: Instantiate NRF51 random number generator
hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
arm: Add header to host common definition for nRF51 SOC peripherals
qtest: Add set_irq_in command to set IRQ/GPIO level
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
cpus.c: Fix race condition in cpu_stop_current()
MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/
hw/arm: versal: Plug memory leaks
Revert "armv7m: Guard against no -kernel argument"
arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
noload kernels are loaded with the u-boot image header and as a result
the header size needs adding to the entry point. Fake up a hdr so the
kernel image is loaded at the right address and the entry point is
adjusted appropriately.
The default location for the uboot file is 32MiB above bottom of DRAM.
This matches the recommendation in Documentation/arm/Booting.
Clarify the load_uimage API to state the passing of a load address when an
image doesn't specify one, or when loading a ramdisk is expected.
Adjust callers of load_uimage, etc.
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-id: 11488a08-1fe0-a278-2210-deb64731107f@gmx.co.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During "[PATCH v2 05/10] qom/globals: generalize
object_property_set_globals()" review, Eduardo suggested to rework the
GlobalProperty handling, so that -global is limited to QDev only and
we avoid mixing the machine compats and the user-provided -global
properties (instead of generalizing -global to various object kinds,
like I proposed in v2).
"qdev: do not mix compat props with global props" patch decouples a
bit user-provided -global from machine compat properties. This allows
to get rid of "user_provided" and "errp" fields in following patches.
A new compat property "x-use-canonical-path-for-ramblock-id" is added
to hostmem for legacy canonical path names, set to true for -file and
-memfd with qemu < 4.0.
(this series was initially titled "[PATCH v2 00/10] hostmem: use
object "id" for memory region name with >= 3.1", but its focus is more
in refactoring the global and compatilibity properties handling now)
-----BEGIN PGP SIGNATURE-----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=mx+3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/machine-props-pull-request' into staging
Generalize machine compatibility properties
During "[PATCH v2 05/10] qom/globals: generalize
object_property_set_globals()" review, Eduardo suggested to rework the
GlobalProperty handling, so that -global is limited to QDev only and
we avoid mixing the machine compats and the user-provided -global
properties (instead of generalizing -global to various object kinds,
like I proposed in v2).
"qdev: do not mix compat props with global props" patch decouples a
bit user-provided -global from machine compat properties. This allows
to get rid of "user_provided" and "errp" fields in following patches.
A new compat property "x-use-canonical-path-for-ramblock-id" is added
to hostmem for legacy canonical path names, set to true for -file and
-memfd with qemu < 4.0.
(this series was initially titled "[PATCH v2 00/10] hostmem: use
object "id" for memory region name with >= 3.1", but its focus is more
in refactoring the global and compatilibity properties handling now)
# gpg: Signature made Mon 07 Jan 2019 12:22:43 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/machine-props-pull-request: (28 commits)
hostmem: use object id for memory region name with >= 4.0
arm: replace instance_post_init()
qdev-props: call object_apply_global_props()
qdev-props: remove errp from GlobalProperty
qdev-props: convert global_props to GPtrArray
qdev: all globals are now user-provided
qdev: make a separate helper function to apply compat properties
compat: remove remaining PC_COMPAT macros
include: remove compat.h
compat: replace PC_COMPAT_2_1 & HW_COMPAT_2_1 macros
compat: replace PC_COMPAT_2_2 & HW_COMPAT_2_2 macros
compat: replace PC_COMPAT_2_3 & HW_COMPAT_2_3 macros
compat: replace PC_COMPAT_2_4 & HW_COMPAT_2_4 macros
compat: replace PC_COMPAT_2_5 & HW_COMPAT_2_5 macros
compat: replace PC_COMPAT_2_6 & HW_COMPAT_2_6 macros
compat: replace PC_COMPAT_2_7 & HW_COMPAT_2_7 macros
compat: replace PC_COMPAT_2_8 & HW_COMPAT_2_8 macros
compat: replace PC_COMPAT_2_9 & HW_COMPAT_2_9 macros
compat: replace PC_COMPAT_2_10 & HW_COMPAT_2_10 macros
compat: replace PC_COMPAT_2_11 & HW_COMPAT_2_11 macros
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This stubs enables the microbit-micropython firmware to run
on the microbit machine.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-12-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the model for the nRF51 timer peripheral.
Currently, only the TIMER mode is implemented.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-9-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a model of the nRF51 GPIO peripheral.
Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations.
The pins can be used as input pins with pull-ups or pull-down.
Furthermore, three different output driver modes per level are
available (disconnected, standard, high-current).
The GPIO-Peripheral has a mechanism for detecting level changes which is
not featured in this model.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use RNG in SOC.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-5-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the NRF51 random number generator peripheral.
This is a simple random generator that continuously generates
new random values after startup.
Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-4-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds a header that provides definitions that are used
across nRF51 peripherals
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
From the "A10 User Manual V1.20" p.29: "3.2. Memory Mapping" and:
7. System Control
7.1. Overview
A10 embeds a high-speed SRAM which has been split into five segments.
See detailed memory mapping in following table:
Area Address Size (Bytes)
A1 0x00000000-0x00003FFF 16K
A2 0x00004000-0x00007FFF 16K
A3 0x00008000-0x0000B3FF 13K
A4 0x0000B400-0x0000BFFF 3K
Since for emulation purpose we don't need the segmentations, we simply define
the 'A' area as a single 48KB SRAM.
We don't implement the following others areas:
- 'B': 'Secure RAM' (64K),
- 'C': Debug/ISP SRAM
- 'D': USB SRAM
(qemu) info mtree
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-000000000000bfff (prio 0, ram): sram A
0000000001c00000-0000000001c00fff (prio -1000, i/o): a10-sram-ctrl
0000000001c0b000-0000000001c0bfff (prio 0, i/o): aw_emac
0000000001c18000-0000000001c18fff (prio 0, i/o): ahci
0000000001c18080-0000000001c180ff (prio 0, i/o): allwinner-ahci
0000000001c20400-0000000001c207ff (prio 0, i/o): allwinner-a10-pic
0000000001c20c00-0000000001c20fff (prio 0, i/o): allwinner-A10-timer
0000000001c28000-0000000001c2801f (prio 0, i/o): serial
0000000040000000-0000000047ffffff (prio 0, ram): cubieboard.ram
Reported-by: Charlie Smurthwaite <charlie@atech.media>
Tested-by: Charlie Smurthwaite <charlie@atech.media>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20190104142921.878-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create two separate CPU clusters for APUs and RPUs.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-17-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds the cpu-cluster type. It aims at gathering CPUs from
the same cluster in a machine.
For now it only has a `cluster-id` property.
Documentation in cluster.h written with the help of Peter Maydell.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-2-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hostmem-file and hostmem-memfd use the whole object path for the
memory region name, and hostname-ram uses only the path component (the
object id, or canonical path basename):
qemu -m 1024 -object memory-backend-file,id=mem,size=1G,mem-path=/tmp/foo -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
qemu -m 1024 -object memory-backend-memfd,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
qemu -m 1024 -object memory-backend-ram,id=mem,size=1G -numa node,memdev=mem -monitor stdio
(qemu) info ramblock
Block Name PSize Offset Used Total
mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000
For consistency, change to use object id for -file and -memfd as well
with >= 4.0.
Having a consistent naming allows to migrate to different hostmem
backends.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
All qdev_prop_register_global() set &error_fatal for errp, except
'-rtc driftfix=slew', which arguably should also use &error_fatal, as
otherwise failing to apply the property would only report a warning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
