Commit Graph

105 Commits

Author SHA1 Message Date
Richard Henderson
12fde9bcdb tcg: Add INDEX_op_qemu_{ld,st}_i128
Add opcodes for backend support for 128-bit memory operations.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16 16:30:25 -07:00
Richard Henderson
7b88010719 tcg: Introduce tcg_target_has_memory_bswap
Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro
with a function with a memop argument.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16 15:21:39 -07:00
Richard Henderson
933b331b30 tcg/riscv: Support softmmu unaligned accesses
The system is required to emulate unaligned accesses, even if the
hardware does not support it.  The resulting trap may or may not
be more efficient than the qemu slow path.  There are linux kernel
patches in flight to allow userspace to query hardware support;
we can re-evaluate whether to enable this by default after that.

In the meantime, softmmu now matches useronly, where we already
assumed that unaligned accesses are supported.

Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16 15:21:39 -07:00
Richard Henderson
9161e9ae2e tcg/riscv: Use full load/store helpers in user-only mode
Instead of using helper_unaligned_{ld,st}, use the full load/store helpers.
This will allow the fast path to increase alignment to implement atomicity
while not immediately raising an alignment exception.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16 15:21:39 -07:00
Richard Henderson
0cadc1eda1 tcg: Unify helper_{be,le}_{ld,st}*
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert.  Unify the pairs of functions.

Hoist the qemu_{ld,st}_helpers arrays to tcg.c.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16 15:21:39 -07:00
Richard Henderson
f0f43534f7 tcg/riscv: Simplify constraints on qemu_ld/st
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers.  Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-11 09:53:41 +01:00
Richard Henderson
61b6daafb4 tcg/riscv: Convert tcg_out_qemu_{ld,st}_slow_path
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-11 09:53:41 +01:00
Richard Henderson
001dddfe0e tcg/riscv: Introduce prepare_host_addr
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
and some code that lived in both tcg_out_qemu_ld and tcg_out_qemu_st
into one function that returns TCGReg and TCGLabelQemuLdst.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-11 09:53:41 +01:00
Richard Henderson
f7041977a6 tcg/riscv: Rationalize args to tcg_out_qemu_{ld,st}
Interpret the variable argument placement in the caller.  Pass data_type
instead of is64 -- there are several places where we already convert back
from bool to type.  Clean things up by using type throughout.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-05 17:21:03 +01:00
Richard Henderson
aeb6326ec5 tcg/riscv: Require TCG_TARGET_REG_BITS == 64
The port currently does not support "oversize" guests, which
means riscv32 can only target 32-bit guests.  We will soon be
building TCG once for all guests.  This implies that we can
only support riscv64.

Since all Linux distributions target riscv64 not riscv32,
this is not much of a restriction and simplifies the code.

The brcond2 and setcond2 opcodes are exclusive to 32-bit hosts,
so we can and should remove the stubs.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-05 17:21:03 +01:00
Richard Henderson
3ea9be3340 tcg/riscv: Conditionalize tcg_out_exts_i32_i64
Since TCG_TYPE_I32 values are kept sign-extended in registers, via "w"
instructions, we don't need to extend if the register matches.
This is already relied upon by comparisons.

Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:46:45 +01:00
Richard Henderson
767c250310 tcg: Introduce tcg_out_xchg
We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:46:45 +01:00
Richard Henderson
b3dfd5fc18 tcg: Introduce tcg_out_movext
This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:46:45 +01:00
Richard Henderson
b8b94ac675 tcg: Split out tcg_out_extrl_i64_i32
We will need a backend interface for type truncation.  For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:46:45 +01:00
Richard Henderson
b9bfe000f9 tcg: Split out tcg_out_extu_i32_i64
We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:46:45 +01:00
Richard Henderson
9c6aa274a4 tcg: Split out tcg_out_exts_i32_i64
We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:24:07 +01:00
Richard Henderson
9ecf5f61b8 tcg: Split out tcg_out_ext32u
We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:23:59 +01:00
Richard Henderson
52bf3398c3 tcg: Split out tcg_out_ext32s
We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:23:49 +01:00
Richard Henderson
379afdff47 tcg: Split out tcg_out_ext16u
We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:21:30 +01:00
Richard Henderson
753e42eada tcg: Split out tcg_out_ext16s
We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:21:19 +01:00
Richard Henderson
d0e66c897f tcg: Split out tcg_out_ext8u
We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:18:04 +01:00
Richard Henderson
678155b2c5 tcg: Split out tcg_out_ext8s
We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-23 08:17:49 +01:00
Richard Henderson
5427a9a760 tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128
Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-04 06:19:42 -10:00
Richard Henderson
5e3d0c199f tcg: Introduce tcg_target_call_oarg_reg
Replace the flat array tcg_target_call_oarg_regs[] with
a function call including the TCGCallReturnKind.

Extend the set of registers for ARM to r0-r3 to match the ABI:
https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-04 06:19:42 -10:00
Richard Henderson
6a6d772e30 tcg: Introduce tcg_out_addi_ptr
Implement the function for arm, i386, and s390x, which will use it.
Add stubs for all other backends.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-04 06:19:42 -10:00
Richard Henderson
9d9db41373 tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
We failed to update this with the w^x split, so misses the fact
that true pc-relative offsets are usually small.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230117230415.354239-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20 10:14:14 +10:00
Richard Henderson
493c9b19a7 tcg/riscv: Implement direct branch for goto_tb
Now that tcg can handle direct and indirect goto_tb simultaneously,
we can optimistically leave space for a direct branch and fall back
to loading the pointer from the TB for an indirect branch.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 22:36:17 +00:00
Richard Henderson
9ae958e4d7 tcg/riscv: Introduce OPC_NOP
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 10:44:23 -10:00
Richard Henderson
2fd2e78d1b tcg: Remove TCG_TARGET_HAS_direct_jump
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 10:25:49 -10:00
Richard Henderson
90c0fee3a2 tcg: Always define tb_target_set_jmp_target
Install empty versions for !TCG_TARGET_HAS_direct_jump hosts.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 10:22:35 -10:00
Richard Henderson
0012e3516e tcg: Move tb_target_set_jmp_target declaration to tcg.h
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 10:22:35 -10:00
Richard Henderson
0fe1c98da9 tcg: Change tb_target_set_jmp_target arguments
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 10:21:54 -10:00
Richard Henderson
cf7d6b8e98 tcg: Split out tcg_out_goto_tb
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 09:56:45 -10:00
Richard Henderson
becc452a36 tcg: Introduce get_jmp_target_addr
Similar to the existing set_jmp_reset_offset.  Include the
rw->rx address space conversion done by arm and s390x, and
forgotten by mips and riscv.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 09:56:40 -10:00
Richard Henderson
7f83167c61 tcg: Replace asserts on tcg_jmp_insn_offset
Test TCG_TARGET_HAS_direct_jump instead of testing an
implementation pointer.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 09:55:13 -10:00
Richard Henderson
b55a8d9d0b tcg: Split out tcg_out_exit_tb
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-17 09:55:13 -10:00
Peter Maydell
052e6534c4 First RISC-V PR for QEMU 8.0
* Fix PMP propagation for tlb
 * Collection of bug fixes
 * Bump the OpenTitan supported version
 * Add smstateen support
 * Support native debug icount trigger
 * Remove the redundant ipi-id property in the virt machine
 * Support cache-related PMU events in virtual mode
 * Add some missing PolarFire SoC io regions
 * Fix mret exception cause when no pmp rule is configured
 * Fix bug where disabling compressed instructions would crash QEMU
 * Add Zawrs ISA extension support
 * A range of code refactoring and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmO3b5sACgkQIeENKd+X
 cFTD8Af+L0OaGzE4C0jil7LdITFKk7ltdTg3yw84ZBvIxrEWMWlt5Yj3Ez5OIPbY
 WpPmCLoJ9XM/5CV5PuPjxcFFExWjXLNeMEvaaT/3/3jPPnA/M/AbZa4hefKRluTg
 kkvBiOuRMPXiYLki5xAHmjD/1j6SQ8ghylPLxYQqyGq87WZt4Dx9msOTZLVzmmYl
 8y9oC8j6yO2UBZYC1TxSkKxFbj+Cp2HmtBZ09tDzwRL6DpRvIlfftiLl8X3awMlK
 YTzCIrmllc38/+cV9IpQhdXzDUZ1kM7Zy56JbJl3XOsS4VnUYGmEtrKYpYQ2CKLY
 /tcmrDKNw1ArWcP1axNN8FHfhy1FyQ==
 =SH+C
 -----END PGP SIGNATURE-----

Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging

First RISC-V PR for QEMU 8.0

* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups

# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
  hw/intc: sifive_plic: Fix the pending register range check
  hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
  hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
  hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
  hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
  hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
  hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
  hw/intc: sifive_plic: Update "num-sources" property default value
  hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
  hw/intc: sifive_plic: Improve robustness of the PLIC config parser
  hw/intc: sifive_plic: Drop PLICMode_H
  hw/riscv: spike: Remove misleading comments
  hw/riscv: Sort machines Kconfig options in alphabetical order
  hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
  hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
  hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
  RISC-V: Add Zawrs ISA extension support
  target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
  target/riscv: Simplify helper_sret() a little bit
  target/riscv: Set pc_succ_insn for !rvc illegal insn
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06 22:15:53 +00:00
Richard Henderson
2e3a933abb tcg/riscv: Fix base register for user-only qemu_ld/st
When guest_base != 0, we were not coordinating the usage of
TCG_REG_TMP0 as base properly, leading to a previous zero-extend
of the input address being discarded.

Shuffle the alignment check to the front, because that does not
depend on the zero-extend, and it keeps the register usage clear.
Set base after each step of the address arithmetic instead of before.

Return the base register used from tcg_out_tlb_load, so as to
keep that register choice localized to that function.

Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06 10:42:55 +10:00
Richard Henderson
9b246685b3 tcg/riscv: Fix reg overlap case in tcg_out_addsub2
There was a typo using opc_addi instead of opc_add with the
two registers.  While we're at it, simplify the gating test
to al == bl to improve dynamic scheduling even when the
output register does not overlap the inputs.

Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06 10:42:55 +10:00
Richard Henderson
6272276361 tcg/riscv: Fix range matched by TCG_CT_CONST_M12
We were matching a signed 13-bit range, not a 12-bit range.
Expand the commentary within the function and be explicit
about all of the ranges.

Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06 10:42:55 +10:00
Richard Henderson
cee44b037b tcg: Add TCGHelperInfo argument to tcg_out_call
This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05 11:41:29 -08:00
Richard Henderson
eb8b0224fc tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05 11:41:29 -08:00
Richard Henderson
c8eef96046 tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN.  For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05 11:41:29 -08:00
Marc-André Lureau
e03b56863d Replace config-time define HOST_WORDS_BIGENDIAN
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.

This can help to make some code independent from qemu too.

gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 10:50:37 +02:00
Richard Henderson
a3fb7c99c0 tcg/riscv: Support raising sigbus for user-only
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-02-09 08:55:02 +11:00
Frédéric Pétrot
fc313c6434 exec/memop: Adding signedness to quad definitions
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.

Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08 15:46:10 +10:00
Richard Henderson
9002ffcb72 tcg: Rename TCGMemOpIdx to MemOpIdx
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-05 16:53:17 -07:00
Richard Henderson
4b473e0c60 tcg: Expand MO_SIZE to 3 bits
We have lacked expressive support for memory sizes larger
than 64-bits for a while.  Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-05 16:53:17 -07:00
Richard Henderson
81c65ee223 tcg/riscv: Remove add with zero on user-only memory access
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21 19:36:44 -07:00
Richard Henderson
f4e01e3021 tcg: Remove TCG_TARGET_HAS_goto_ptr
Since 6eea04347e, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09 20:23:38 -07:00