. if BX_GUI_SIGHANDLER is true and the term gui is selected at run time,
a new global boolean (bx_gui_sighandler) variable is set to true.
Special signal handling is done if bx_gui_sighandler is true.
. if BX_GUI_SIGHANDLER is not true, bx_gui_sighandler is not compiled in.
New behaviour is:
. No command line arg (user want to load or create a new conf file)
-> no .bochsrc is loaded
-> defaults to "2. Read options from..."
. command line arg -q (user want to quick start from .bochsrc)
-> .bochsrc is loaded
-> if found Run the simulation
-> if not found defaults to "2. Read options from..."
. command line arg -f (user want to edit a conf file)
-> conf file is loaded
-> if found defaults to "3. Edit options"
-> if not found defaults to "2. Read options from..."
. command line arg -qf (user want to quick start from a conf file)
-> conf file is loaded
-> if found Run the simulation
-> if not found defaults to "2. Read options from..."
. After selection of "2. Read options from..."
-> defaults to "5. Begin simulation"
- fix "enable-control-panel" behaviour in configure.in.
- check if a romimage was supplied in the conf file.
If not, print a hint about a missing/corrupt conf file.
I hope I did not break anything, notably the Carbon gui
interface at runtime. The behaviour of the button handlers was wrong if bochs
is configured with plugins and all display libs enabled, wxWindows is present
and a gui using textconfig is selected.
The wx cdrom button still doesn't work since get_first_cdrom() always returns
NULL.
- add a new global struct bx_startup_flags which stores argc,argv and
when necessary, the WinMain arguments hInstance, hPrevInstance, etc.
The new struct is defined in gui/siminterface.h because it is needed in
both the main.cc code and in wxmain.cc and textconfig.cc (which don't
include bochs.h).
- rename main() to bxmain() and create new main() and WinMain().
main() and WinMain() just fill in the bx_startup_flags and then
call bxmain(). Only one is defined at a time, of course.
- so far, WinMain is ONLY used when compiling with wxWindows on win32.
It may be useful in other contexts as well, but I don't want to enable
it in any other situation without some serious testing of different
configurations.
- modified:
main.cc gui/siminterface.cc gui/siminterface.h
gui/textconfig.cc gui/wxmain.cc
a control panel, but now we're calling it a text configuration interface.
Modified:
.bochsrc Makefile.in bochs.h main.cc cpu/Makefile.in
debug/Makefile.in disasm/Makefile.in fpu/Makefile.in
gui/Makefile.in iodev/Makefile.in memory/Makefile.in
These files are part of the wx plugin, and they should not be linked
into a separate plugin. I have changed gui/Makefile.in and configure.in
to correct this.
- This fixes bug [ 628667 ] don't build plugin for wxdialog, wxmain
- modified: gui/Makefile.in configure.in configure
- if translation=auto :
. translation=none if cylinders <=1024 and heads <=16
. translation=large if cylinders * heads <= 131072
. transaltion=lba otherwise
- changes default translation value to "auto"
- add example in .bochsrc
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
constructors around. The min,max that were being passed to the parent
class constructor had junk in them. In config.h.in, I defined the minimum
and maximum values for each integer datatype so now we pass correct
min and max values to the parent class. These replace the BX_MAX_[U]INT
and BX_MIN_[U]INT values.
- modified: main.cc config.h.in gui/siminterface.cc
value instead of a 32 bit value. Unfortunately there were many uses
of bx_param_num_c::get() which depended on its size, and they were
all broken by this change. So in this rev I am changing get() to
return a 32bit unsigned again. If you really want a 64bit value (which
is quite rare) you should call get64() instead.
- modified: gui/siminterface.h gui/siminterface.cc
Patch name: patch.macosx-ui-polishing
Author: Jeremy Parsons <brefin@mac.com>
Date: Wed Oct 16 2002
Detailed description:
A number of changes to the Carbon Code to improve how well it meshes with the
MacOS X user experience as well as to make sure that all of more recently added
toolbar buttons actually work.
Specific changes include:
Added partial keymap support. (Keymaps don't yet affect what the user types
but an X11 keymap can be used to enable pasting)
Copying of text screens added
Pasting of text as keyboard input added
Copy, Paste, Reset, and Snapshot menu items now work the same as the
corresponding toolbar elements
Revamped icon handling to use Control Manager IconControls,
thus removing icon display code and greatly simplifying icon click handling code
while adding better behaviours (icons that darken when clicked, track mouse movement,
and only do something if the mouse is released atop of them as well as gaining
the ability to be disabled)
Tweaked Paste toolbar and menu items to only be enabled if key mapping is in use AND the
clipboard contains text
Tweaked Copy and Snapshot toolbar and menu elements to only be enabled if
the screen mode is text.
Tweaked User Keys toolbar element to only be enabled if there are user keys
defined to be sent
Tweaked Configure toolbar element to only be enabled if a tty is available
(as in the emulator was started from a terminal)
Respaced toolbar icons to match Aqua Toolbars
Disabled menu items that are not currently handled (undo, clear, cut, disk eject)
Full screen backdrop resettled all across the screen
Fixed the callback interface so that when a Panic needs to ask the user about continuing
it actually works appropriately.
----------------------------------------------------------------------
bx_shadow_num_c able to handle pointers to 64 bit values. This
allows x86-64 and wxWindows to coexist.
- I had a number of duplicate constructors for bx_shadow_num_c,
with an without the description arg. I eliminated the ones
that had no description, and also removed the min/max arg from
all. I still need a bunch of constructors though, for
Bit64u*, Bit64s*, Bit32u*, Bit32s*, Bit16u*, Bit16s*, Bit8u*, Bit8s*.
Having all these constructors allows us to write
new bx_shadow_num (bxid, name, description, &value)
for basically any integer variable. They are all handled by the same class.
- these changes led to minor touchups in cpu/init.cc and iodev/keyboard.cc
- modified:
configure main.cc cpu/init.cc iodev/keyboard.cc
gui/siminterface.cc gui/siminterface.h
X11 keymap files. This okay since the keysym values are identical. The "AltGr"
key on European keyboards doesn't work with wxGTK 2.3.3 because the keysym
GDK_Mode_switch is not handled in wxGTK.
- German keymap table for wx and wxgtkkeys.h are no longer needed
different versions of the code for wxWindows and non-wxWindows and the GDB
stub did not accept any command line options at all.
- IMPORTANT CHANGE: the quick start option used to cause two things:
1) read the bochsrc immediately, 2) start simulation immediately without
going into the config interface. This has changed in a subtle way.
Now, we always try to read the bochsrc immediately. Then if the quick
start option is on, we start the simulation immediately.
- add "Restore Factory Default Configuration" in text config menu. It was
already there in wx. Now the default choice is always "5. Begin simulation"
and because the bochsrc is always read now, this works.
- When the user chooses "Read configuration file" from either text mode
or wx interfaces, reset all bochs parameters first, then read in the
new file. This means that every time you read a configuration file
you are starting from a consistent "blank slate".
- move much of the code from bx_do_text_config_interface into bx_init_main
so that wxWindows and non-wxWindows code uses the same logic. There was
only a tiny bit left in bx_do_text_config_interface so I eliminated it.
- move the "help" message into a separate function print_usage()
- detect all flags (cmdline args that start with -) in a loop, instead of
a big if/else. This makes it easy to add others.
- fix problem with Carbon gui, so that -psn arg gets ignored
- print usage if you type -h, --help, or if flags are not recognized
- code that called io->set_log_action (that sets the log action for all
devices) was only called if the configuration interface was on; I'm not
sure why. Now it is called all the time.
- the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit
and main() are very similar. They both call bx_init_siminterface, then
bx_init_main (and quit if it fails), then show the config interface if
quickstart is off, and then simulate.
- modified: main.cc gui/control.cc gui/wxmain.cc
specific to X windows. I changed a few names of variables and methods to
sound less X windows specific, for example in the BXKeyEntry struct
the "xwinKey" field is now called "hostKey".
- remove the hacks in bx_keymap_c::loadKeymap that checked that every
keysym started with "XK_". Now I can still make that check, but it
is done in x.cc's convertStringToXKeysym() instead.
- in sdl.cc, load the keymap in specific_init function. I had to
create a conversion function from SDL key names to SDLkey values.
I created a table of key names and associated values, and I just
do a strcmp on each name. It's not a fast algorithm obviously but this
conversion only has to be done for maybe 200 keys at startup time.
- added a key map file for SDL called sdl-pc-us.map. Since this has
basically all the SDLK_* symbols defined, it is a good starting point
if you need to make any other keymaps.
- modified: gui/keymap.cc gui/keymap.h gui/sdl.cc gui/x.cc iodev/keyboard.cc
- added: gui/sdlkeys.h gui/keymaps/sdl-pc-us.map
wxLog::SetActiveTarget (new wxLogStderr ());
which used to be inside #ifdef __WXDEBUG__ ... #endif. This fixes the
problem of tons of little debug message dialogs appearing in wxwindows
libraries built without debug support.
- This reverts revision 1.61. I cannot figure out why I had trouble back on
Sept 27, because now both my debug and release libraries work ok with the
SetActiveTarget line.
the toolbar button and the mouse capture shortcuts (F12 and middle button)
call ToggleMouse(). The only difference is that the first time you
press the toolbar button it gives a little message about mouse capture
and how to turn it off.
- modified: gui/wx.cc gui/wxmain.cc gui/wxmain.h
Quit while the simulation was running. I used to just do
wxFrame::Close(TRUE) in the wxwindows thread, but the simulation
thread would keep on running even after the window had disappeared.
If the simulation thread sent any messages to the gui, it could
segfault. Now, when you click on Quit it asks the simulator to
quit, but does not close the gui. When the simulator thread finally
quits, THEN it calls wxFrame::Close(TRUE) from the sim_thread (with
appropriate gui mutex). Such tricks are only needed when the
simulation is running. I hope this will fix bug #616142: "wx: crash
from events after gui shutdown".
- move MyFrame::closing flag out into a global variable wxBochsClosing
so that it will be valid even when the MyFrame is deleted. See
comments on in wxmain.h.
- when wxBochsClosing is set, don't create any new windows. If any
errors appear, just print them to stderr because the gui is just
about to be closed.
- fix comment in SimThread::Entry to talk about longjmp instead of
kill_bochs_request
- (minor) move contents of DefaultCallback2 into DefaultCallback. It
doesn't refer to the wxApp at all. This is a bit safer in case it
gets called when the wxApp is in the process of being deleted.
- modified: gui/wxmain.cc gui/wxmain.h
This must be done carefully though, because the call to SDL_WarpPointer
generates a mouse motion event of its own. To work around this, I have
added code that should ignore motion events generated by SDL_WarpPointer.
This should fix bug [ 619283 ] SDL: os mouse pointer leaves the window.
On Linux, SDL 1.2.3 it works fine.
bx_list_c can now be displayed as either a wxStaticBox with the
child parameters inside, or as a wxNotebook with each child
parameter in a separate tab. (The children can also be lists of
course.) The default display is the wxStaticBox type, but if you
set the option bit bx_list_c::USE_TAB_WINDOW in the list,
ParamDialog will use the wxNotebook display instead.
- to get the param trees working, I created a new struct
AddParamContext, which is passed to AddParam(). This struct is
critical when AddParam calls itself recursively to display lists
within lists.
- use the wxNotebook display feature for the ATA0,1,2,3 controller
dialog box. Now instead of being hundreds of pixels tall, it is
reasonable height with three different tabs. This fixed bug
#619074: "wx: ATA interface editor too tall" and was the whole
reason I started messing with this at all.
plus some minor cleanups
- when I added the enum constant bx_list_c::USE_TAB_WINDOW, I also
removed the BX_ prefix from all the other enum constants that are
used in parameter options in siminterface.cc. Since these constants
are enums within a class, there is no possibility of namespace
conflicts so the prefix is not needed.
- added wxADJUST_MINSIZE to all wxChoice controls, since that tells
wxWindows to adjust its size to the length of the longest string.
- instead of calling SetSize or SetSizeHints on every textcontrol with
a hardcoded width, I am using just two wxSize specifications for
everything: either normalTextSize or longTextSize.
- edit names of a few menus and params. For example now instead of
the tab saying "Master ATA device on channel 0" it will say
"First HD/CD on channel 0".
Modified Files:
main.cc gui/control.cc gui/gui.cc gui/siminterface.cc gui/siminterface.h
gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc
to be signed instead of unsigned, it was looking up color values
like wxBochsPalette[-126] instead of wxBochsPalette[130]. This affected
any colors in the palette between 128 and 255. I simply hanged newBits
to signed, and it fixed bug #618462: wx: 256 color modes not working properly
- I am still not satisfied with the way that wxWindows maps colors on an
8-bit display, but that is a different issue.
after the palette changes. This makes the iodev/vga.cc code do the
right thing. This also fixes the toolstar splash screen, but at a
fraction of the cost of the solution in rev 1.37.
need to be updated. This was impossible before, because we only stored the
RGB values in wxScreen. I added a new array called wxPixel that stores the
8-bit color index that should be displayed. Now if the VGA palette changes,
I use wxPixel data to reconstruct wxScreen using the new palette.
- this fixes the display of the splash screen of the Toolstar disk, since
it relied on drawing the picture and then fading the colormap from back
up to the normal values. I was hoping it would fix the splash screen of
win95 too, but it does not.
so that windows types can be used in fields, for example in cdrom.h:
#ifdef WIN32
HANDLE cdrom_interface::hFile;
#endif
- since every file includes bochs.h, I removed includes of <windows.h>
everywhere else
- modified: bochs.h cpu/extdb.cc gui/win32.cc gui/wx.cc iodev/cdrom.cc
iodev/eth_win32.cc iodev/floppy.cc
instead of winmm being a part of GUI_LINK_OPTS_WIN32 only, it is
placed in @DEVICE_LINE_OPTS@ so that it will be used for sdl, rfb, wx,
etc.
- solve compile problems when building bximage, niclist, and any other
console based program. The compile flags returned by wx-config and
sdl-config did strange things to these console programs, for example
redefining main to SDL_main. Because I wanted to use the
configure-generated CFLAGS to compile the programs, but I wanted to
avoid including GUI specific compile options, I split up the configure's
@CFLAGS@ variable into @CFLAGS@ and @GUI_CFLAGS@, and split
@CXXFLAGS@ into @CXXFLAGS@ and @GUI_CXXFLAGS@. All programs in the
Bochs binary will use both, but the console programs will just use
@CFLAGS@ or @CXXFLAGS@.
- gui/Makefile.in, I no longer use the gui specific CFLAGS variables,
SDL_CFLAGS and WX_CXXFLAGS. These values are included in CFLAGS and
CXXFLAGS now.
- modified: configure.in, configure, all Makefile.in's
conditionally include <windows.h>. This may seem like a drastic step
for just one little type, but I expect before long we may want to use
other symbols like VK_F12 which are also in windows.h. In a cygwin
compile this is required.
on the wxWindows interface. There are many more changes here than
absolutely required to fix the memory leaks. Instead, I've tried to
clean things up so that it does the right thing, and is easier to
read and maintain.
- For events that the text mode interface is going to ignore anyway, I #ifdefed
the event creation code instead of calling new and then delete.
- now all synchronous events in siminterface.cc are created as local variables
on the stack. Some of them were allocated with new before, and yes some of
them leaked.
- now I ignore the result of sim_to_ci_event (&event). It was always
returning a pointer to the input event anyway. This makes the event
sending code simpler.
- wxmain.cc:
- in the BxEvent handling functions, now all cases "break" down to common
code at the end which deletes async events. This is easier to read than
having each case handle the delete individually.
- in OnLogMsg, do not delete the event here because it is now handled
in the common code of OnSim2CIEvent instead.
- thanks to Christophe for pointing out the location of the worst
memory leak.
- make bx_init_main return -1 if any parse errors occur.
- wxWindows: if bx_init_main returns -1, don't even show the application
window. You'll get an error dialog and then it exits. So far this
only happens if you run with -q and the parse fails.
- non-wxWindows: if bx_init_main returns -1, just exit. So far this
only happens if you run with -q and the parse fails.
- with these changes, handling of bochsrc parse errors seems to work
as you would expect. And it certainly doesn't go into an infinite
recursive loop, as it used to!
- a little more testing and I can close
bug 614175: infinite panic loop if bochsrc buggy
- modified: main.cc gui/siminterface.h gui/wxmain.cc
and into wxmain.cc, like other actions.
- set a default siminterface callback for the whole application, which is used
whenever the simulator is not running. This is important when the wx code
calls simulator or param code and triggers a BX_PANIC or something.
The default callback is responsible for displaying error messages which
appear while reading the bochsrc, for example.
- move the implementation of BX_SYNC_EVT_LOG_ASK and BX_ASYNC_EVT_LOG_MSG
into a separate function OnLogMsg(). In the future, OnLogMsg() may be called
from the application default callback on errors.
- modified: gui/wx.cc gui/wxmain.cc gui/wxmain.h
- Features :
. number of active channels defined at boot-time config
. new options in bochsrc
. up to 8 devices support (disks or cdroms)
. up to 4 cdrom devices can be changed at runtime config
. wxwindows config interface
parameter values associated with the dialog and updated the wxWindows
controls. At the time I didn't realize that I was overriding
wxWindow::Refresh() which repaints the window. Later, I renamed the method
to CopyParamToGui() to make it more clear, but many of the callers in
wxmain.cc continued to call Refresh(), which now reverted to the parent class
wxWindow::Refresh(). Since there was no compile error I didn't notice for a
while, but it caused the ParamDialogs to repaint themselves constantly but
never actually change their values. This is now fixed by changing those
method calls to CopyParamToGui().
started using a wxTimer to trigger the redraws. Now instead of calling
MyPanel::OnPaint directly, I call Refresh() instead. This makes the Windows
display work correctly.
I'm not sure why this wasn't needed before, but after switching to
wxWindows 2.3.3 it seems to be important.
- in a wxLogDebug() call I was trying to pass a struct instead of a string.
Fixed that.
'char_changed'. These variables are currently only used by the win32 gui for
the update of the font bitmaps. SDL and wxWindows do not use the variables
since they are using the charmap data directly
- free text snapshot memory when the user has cancelled the dialog
- write text snapshot file in binary mode (disables the LF -> CRLF conversion
in cygwin)
- MyPanel::blankCursor
- MyFrame::panel
- AdvancedLogOptions::action (2d array of wxChoice *'s)
- ParamDialog::idHash, ParamDialog::paramHash, and ParamStructs
- file dialog in BrowseTextCtrl
- fix illegal use of a wxObject. I had been clearing the ParamStruct
with memset(), but I forgot that ParamStruct was a subclass of wxObject
so I was trashing the wxObject fields too! Instead I created a
ParamStruct constructor that clears the pointers to NULL.
- comment out debug output from AdvancedLogOptionsDialog::SetAction
- modified files: gui/wx.cc gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h
interface) by using get/set_default_log_action. This has very minimal effect
on the behavior of the text config interface.
- modified: main.cc gui/control.cc
time, so I've tried to improve it. Now the logfunctions class has a
static field default_onoff[] which represents the default actions for
each kind of log message. Default_onoff[] is initialized with static
data so it should be valid by the time it's used. This can be reached by
static accesors logfunctions::set_default_action and
logfunctions::get_default_action. It seemed appropriate to put the defaults
inside the logfunctions class, rather than in bx_options or siminterface.
However, to make them accessible to the config interface, I added similar
methods in siminterface that map to the accessors in logfunctions.
- logio.cc had two different definitions of LOG_THIS for different halves
of the file, which was ugly and confusing. (LOG_THIS is needed for BX_INFO,
BX_DEBUG, etc.) I removed the first definition and fixed the minor compile
problems that ensued. In the initializers for iofunctions, everything
is complicated because of the unpredictable order that constructors get
called. They must use this->log to print things, because genlog hasn't
been initialized yet.
- now if SIM->set_log_action(int mod, int level, int action) is called
with mod<0, it sets the action for all modules/devices instead of just one.
- modified: bochs.h logio.cc main.cc gui/siminterface.cc gui/siminterface.h
- LogOptionsDialog: show the "no change" option. When options other than
"no change" are selected, set both the default log action and the
specific log action for all devices.
- AdvancedLogOptionsDialog: store the wxChoice*'s in a 2d array since I
have to refer to them later.
- since both the log options and advanced log options dialogs needed to
create many wxChoices using similar rules, I moved the creation code
into a utility function makeLogOptionChoiceBox.
- I finally discovered the wxADJUST_MINSIZE option to wxSizer::Add(),
which solves some layout problems that I was having with wxChoices.
With this setting, the wxChoice will automatically grow to the size of
the largest string that can be selected.
- improve sizing of the scrollWin according to the desired size of the panel
that contains all the wxChoices.
- add sketches for proposed dialog that combines both LogOptionsDialog and
AdvancedLogOptionsDialog using tabs
set_text_charbyte()
- vga: store the address of the active charmap in the new variable
charmap_address
- vga: text mode hack removed. The write modes, operations and masks must be
used in text mode too.
- sdl: clear_screen() is not necessary when the charmap has changed
- win32: update only the changed font bitmaps before drawing the text
- All mouse events in the VGA window go to MyPanel::OnMouse. Middle mouse
button and F12 both toggle mouse capture. OnMouse queues an event
for the simulation thread to process. The simulation thread calls
bx_devices.keyboard->mouse_motion() when it sees the event on the queue.
- add IFDBG_VGA around some display debug code. All wx mouse debug code
is controlled by IFDBG_MOUSE.
- modified: gui/wx.cc gui/wxmain.cc gui/wxmain.h
the wxwindows thread, it just sets a boolean flag needRefresh. Meanwhile, a
wxTimer running in wall clock time (as opposed to sim time) triggers a
repaint only if the the boolean is true.
- now MyRefresh is implemented by just setting needRefresh=true.
- make graphics_tile_update call MyRefresh.
- make dimension_update call MyRefresh.
instead of bx_param_bool_c. There are several cases where I need an
enum to enable/disable some fields, and this change should allow
that.
- modified: gui/siminterface.h gui/siminterface.cc
wxWindows without debugger, I needed to add some more cases of
#if BX_DEBUGGER to make it work. It is certainly possible to
handle such problems by always compiling in the debug dialogs but
only instantiating them if debug support is compiled in, but I have
chosen (for now) to put #if BX_DEBUGGER around things like this.
- modified: gui/wxdialog.h gui/wxdialog.cc
wxWindows without debugger, I needed to add some more cases of #if
BX_DEBUGGER to make it work. All the problems I found were things like
referencing a debug structure which was never initialized (NULL). It is
possible to handle such problems by always compiling in the debug dialogs but
only instantiating them if debug support is compiled in, but I have chosen
(for now) to put #if BX_DEBUGGER around things like this.
printed to stderr in the text debugger. Also allows the user to
type (text) debugger commands directly, which also appear in the log.
- all text output in the debugger now passes through dbg_printf()
(used to be fprintf to stderr) so that in wxWindows I can redirect
it all to the wxWindows debug log screen. Added debug_fputs to
siminterface which actually sends the text to the GUI by creating
a BX_ASYNC_EVT_DBG_MSG event.
- changed prefix and msg fields of BxLogMsgEvent to const char *,
and also in args of logmsg method of siminterface.
- don't trap SIGINT in wxWindows. There are other ways to stop execution.
Also, signal handling with multiple threads is very strange and different
on different platforms.
- minor changes to fix gcc -Wall warnings in dbg_main.cc
- add a new boolean parameter BXP_DEBUG_RUNNING that tells if the debugger is
running freely or not. This is used by the wxWindows GUI to enable or
disable certain choices.
- CpuRegistersDialog has continue,stop,step buttons. When the sim is running
freely, I disable continue and step, and enable stop. When the sim stops
to wait for the user, I disable stop and enable continue and step. The
change of enables used to be triggered by actually pressing the button,
but then if you started/stopped the simulation in some other way (typing
in debug log window) the enables were never changed. Now the enables are
controlled by the value of BXP_DEBUG_RUNNING, which is set by the debug code
itself, and the buttons are enabled at the right time.
- ParamDialog::Refresh() is now virtual so that child classes can redefine
its refresh behavior.
- in safeWxStrcpy, force the last element of the array to be a 0, since
I noticed that strncpy is not guaranteed to terminate the string!
- modified: debug/dbg_main.cc debug/debug.h gui/siminterface.cc
gui/siminterface.h gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc
gui/wxmain.h
at the appropriate times. For example, you can't stop when you're
stopped. You can't step when it's running.
- modified: gui/wxdialog.cc gui/wxdialog.h
Bochs debugger. The Bochs debugger calls SIM->debug_get_next_command() which
does not return until a debugger command is found. The siminterface sends an
synchronous event to the wxWindows thread with a blank to be filled in with a
debugger command. wxWindows fills in the blank and sends the synchronous
event back, and the Bochs debugger interprets it as if it was typed on
the command line. For the long term I haven't decided whether to stick with
sending text strings vs. some other method.
- so far the wxWindows debugger consists of one big dialog box that shows
all the standard registers, and a working Continue, Stop, and Step button.
- modify ParamDialog so that it is more useful as a base class, by moving
some things to protected members&fields, separating out functionality
that is most likely to be replaced into virtual functions, and making it
generally more flexible. The new CpuRegistersDialog is based on
ParamDialog.
- in wxdialog.cc, continue the convention of using wxID_HELP, wxID_OK,
wxID_CANCEL, etc. for the id's of buttons, instead of wxHELP, wxOK, etc.
which are intended to be ORred together in a bit field.
- cpu/init.cc: put ifdefs around DEFPARAMs for flags in configurations
where they don't exist. Add an eflags shadow parameter that represents all
of the bits of eflags at once. There are also boolean shadow params for
each bit.
- modified files: cpu/init.cc debug/dbg_main.cc debug/debug.h
gui/siminterface.cc gui/siminterface.h gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h
length. (The first guinea pig is the 2-bit IOPL field in eflags.)
Also it can have a pointer to a Bit8u, Bit16u, Bit32u and signed
equivalents and do the right thing.
- add lots more CPU fields as parameters: EBP ESI EDI ESP, all segment regs,
LDTR, GDTR, eflags, DR*, TR*, CR*. These are all visible on a
ridiculously tall dialog box that will one day become the debugger.
wxWindows thread. However, when the wxWindows thread calls
Bochs code, for example SIM->some_action() that triggers a
BX_PANIC(), then the Sim2CI event is created in the wxWindows
thread. This used to cause thread deadlock, but now it is
recognized and handled safely.
vga_charmap
- the SDL gui uses the charmap data for the vga text display
* TODO: implement this feature for other guis
- removed unused variables in sdl.cc and gui.cc
- fixed a warning in vga.cc
- modified files: config.h.in cpu/init.cc debug/dbg_main.cc gui/control.cc
gui/siminterface.cc gui/siminterface.h gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h iodev/keyboard.cc
----------------------------------------------------------------------
Patch name: patch.wx-show-cpu2
Author: Bryce Denney
Date: Fri Sep 6 12:13:28 EDT 2002
Description:
Second try at implementing the "Debug:Show Cpu" and "Debug:Show
Keyboard" dialog with values that change as the simulation proceeds.
(Nobody gets to see the first try.) This is the first step toward
making something resembling a wxWindows debugger.
First, variables which are going to be visible in the CI must be
registered as parameters. For some variables, it might be acceptable
to change them from Bit32u into bx_param_num_c and access them only
with set/get methods, but for most variables it would be a horrible
pain and wreck performance.
To deal with this, I introduced the concept of a shadow parameter. A
normal parameter has its value stored inside the struct, but a shadow
parameter has only a pointer to the value. Shadow params allow you to
treat any variable as if it was a parameter, without having to change
its type and access it using get/set methods. Of course, a shadow
param's value is controlled by someone else, so it can change at any
time.
To demonstrate and test the registration of shadow parameters, I
added code in cpu/init.cc to register a few CPU registers and
code in iodev/keyboard.cc to register a few keyboard state values.
Now these parameters are visible in the Debug:Show CPU and
Debug:Show Keyboard dialog boxes.
The Debug:Show* dialog boxes are created by the ParamDialog class,
which already understands how to display each type of parameter,
including the new shadow parameters (because they are just a subclass
of a normal parameter class). I have added a ParamDialog::Refresh()
method, which rereads the value from every parameter that it is
displaying and changes the displayed value. At the moment, in the
Debug:Show CPU dialog, changing the values has no effect. However
this is trivial to add when it's time (just call CommitChanges!). It
wouldn't really make sense to change the values unless you have paused
the simulation, for example when single stepping with the debugger.
The Refresh() method must be called periodically or else the dialog
will show the initial values forever. At the moment, Refresh() is
called when the simulator sends an async event called
BX_ASYNC_EVT_REFRESH, created by a call to SIM->refresh_ci ().
Details:
- implement shadow parameter class for Bit32s, called bx_shadow_num_c.
implement shadow parameter class for Boolean, called bx_shadow_bool_c.
more to follow (I need one for every type!)
- now the simulator thread can request that the config interface refresh
its display. For now, the refresh event causes the CI to check every
parameter it is watching and change the display value. Later, it may
be worth the trouble to keep track of which parameters have actually
changed. Code in the simulator thread calls SIM->refresh_ci(), which
creates an async event called BX_ASYNC_EVT_REFRESH and sends it to
the config interface. When it arrives in the wxWindows gui thread,
it calls RefreshDialogs(), which calls the Refresh() method on any
dialogs that might need it.
- in the debugger, SIM->refresh_ci() is called before every prompt
is printed. Otherwise, the refresh would wait until the next
SIM->periodic(), which might be thousands of cycles. This way,
when you're single stepping, the dialogs update with every step.
- To improve performance, the CI has a flag (MyFrame::WantRefresh())
which tells whether it has any need for refresh events. If no
dialogs are showing that need refresh events, then no event is sent
between threads.
- add a few defaults to the param classes that affect the settings of
newly created parameters. When declaring a lot of params with
similar settings it's more compact to set the default for new params
rather than to change each one separately. default_text_format is
the printf format string for displaying numbers. default_base is
the default base for displaying numbers (0, 16, 2, etc.)
- I added to ParamDialog to make it able to display modeless dialog
boxes such as "Debug:Show CPU". The new Refresh() method queries
all the parameters for their current value and changes the value in
the wxWindows control. The ParamDialog class still needs a little
work; for example, if it's modal it should have Cancel/Ok buttons,
but if it's going to be modeless it should maybe have Apply (commit
any changes) and Close.
X windows, wxWindows. Each platform has its own way of returning
a variable length string, and its own rules about how you're supposed
to dispose of the string. Now all platforms do the same thing: they
allocate a Bit8u buffer with C++ "new" and copy the clipboard data in,
then release the clipboard data in the platform-specific correct way.
The Bit8u buffer is sent to the keyboard code, which frees it with
delete [] when finished.
- modified: gui/wxmain.cc gui/wxmain.h
X windows, wxWindows. Each platform has its own way of returning
a variable length string, and its own rules about how you're supposed
to dispose of the string. Now all platforms do the same thing: they
allocate a Bit8u buffer with C++ "new" and copy the clipboard data in,
then release the clipboard data in the platform-specific correct way.
The Bit8u buffer is sent to the keyboard code, which frees it with
delete [] when finished.
- modified: gui/wx.cc gui/x.cc gui/win32.cc iodev/keyboard.cc
files that need them. This is more in line with the other gui libraries,
and the compile line is easier to read.
- modified: Makefile.in configure.in configure gui/Makefile.in
delivered to both the GUI and simulator thread, so they both call
bx_signal_handler. This can lead to deadlock as multiple threads enter
BX_PANIC and try to show a dialog box at once. To solve the problem, I made
a function isSimThread() which can be called from anywhere. If the
bx_signal_handler is called from any thread OTHER THAN the simulation thread,
it returns without doing anything. As a result, only one thread is allowed
to enter the signal handler code, and now control-C works correctly.
Bochs to immediately read the bochsrc and start simulating immediately (as
opposed to going into the configuration interface first). Now -q does
the right thing in the wxWindows interface. It behaves as if you selected
Read Configuration and then Simulate:Start.
- modified: main.cc gui/siminterface.cc gui/siminterface.h gui/wxmain.cc
wxHAS_RAW_KEY_CODES is not available in the wxWindows library.
my patch "patch.wx-raw-keycodes" adds wxHAS_RAW_KEY_CODES to the wxWindows
library, and it will also be in wxWindows 2.3.3 and beyond.
correct name for floppy and cdrom devices:on windows, A:, B:, etc;
on Linux /dev/fd0 and /dev/cdrom.
- It's perfectly ok to type device names into the blank on those dialog
boxes, but the label "Disk Image File:" sort of implies that it has to
be a file. To try to avoid confusion change the label to simply
"Disk Image:".
on win32. I believe this is the same problem that scarlip referred to as
"it doesn't start reliably. sometimes it works, sometimes it won't".
See comments in gui/wx.cc (dimension_update) for details.
- since dimension_update is called from the simulator thread, it needs to
get the GUI mutex before calling any wxWindows functions. Now it does.
- add lots of IFDBG_VGA(...) lines which I use to diagnose various problems.
They are compiled away by default (for performance). See definition of
IFDBG_VGA() in gui/wxmain.h.
values. All wxWindows dialogs return wxID_OK or wxID_CANCEL. The
wxOK and wxCANCEL symbols are ONLY used in input arguments that determine
whether to display the ok and cancel buttons. Now I'm doing the same.
Return values are wxID_OK if they pressed the ok button, and wxID_CANCEL
if they pressed cancel.
SetToolBitmapSize() to set the icon size to 16x16; when I changed the icon
size I forgot to change SetToolBitmapSize() and somehow it looked ok on
wxGTK.
- change mouse tooltip to "(Mouse Not Implemented Yet!)" for now
has a 16bit signed value. If you try to set the max above 32767, it
overflows and does stupid things. To combat this tendency, I now use
the SPINCTRL_FIX_MAX(x) macro when setting the max range of a spinctrl.
On platforms that need it, this will saturate the range at 32767.
- implement the Edit Keyboard dialog using ParamDialog instead of the
handcoded thing.
- make Serial/Parallel dialog look a little better
- change order of "other" dialog to get ips and vga_update_interval on top
ParamDialog. When a boolean param changes, I read its dependent_list
field to see which other parameters depend on it. Then, for any
dependents that are actually showing in the dialog, I set their
enable bit accordingly. This required addition of another hash table,
called paramHash. The two EnableChanged() methods implement this.
- remove all ConfigKeyboardDialog code because I can do just as well
using the generic ParamDialog.
- fix bug that caused occasional crashes. To attempt to find all the
choices in an a wxChoice control, I was calling GetClientData() on
increasing index until it returned NULL. The docs implied that this
was safe, but it's not. Eventually I found an apparantly undocumented
call wxChoice::GetCount() that gives the number of strings in the
choice box and it allows me to do the right thing.
to change the enable/disable status of other parameters worked fine for
the text mode interface but poorly for the wxWindows gui. So I
implemented it a different way. Now in every boolean parameter, there is
a field called dependent_list which is a list of parameters which
are enabled/disabled by that boolean. Having this list available
allows both the text mode CI and the wxWindows CI to know which fields
should be enabled and disabled as a result of a boolean changing value.
- when the set() method of a bool param is called, or when the
dependent_list is changed, a private method called update_dependents()
changes the enabled status of all dependent parameters.
- add macros to get parameter ids of serial and parallel port parameters,
using the port number as an input variable.
to change the enable/disable status of other parameters worked fine for
the text mode interface but poorly for the wxWindows gui. So I
implemented it a different way. Now in every boolean parameter, there is
a field called dependent_list which is a list of parameters which
are enabled/disabled by that boolean. Having this list available
allows both the text mode CI and the wxWindows CI to know which fields
should be enabled and disabled as a result of a boolean changing value.
- when the set() method of a bool param is called, or when the
dependent_list is changed, a private method called update_dependents()
changes the enabled status of all dependent parameters.
a method to add the parameters (bx_param_c) that you want to edit,
and display it. It knows how to display and edit boolean, int,
enum, and string, so it can do a reasonable job on any parameter.
The end result is not as nice as a box that you lay out by hand, but
it's decent. The most obvious thing that's missing from
ParamDialog-generated dialogs is that I haven't found a way to
make an "Enable" button that enables/disables a bunch of other
parameters. I'll keep thinking about that.
- using ParamDialog, I made dialogs for Sound, Cmos, Serial/Parallel,
32bitOSloader, and an ugly catch-all category called other.
Now I believe you can edit every single option using wxWindows.
- remove the format string from GetTextCtrlInt() because the strtoul
conversion is better than the sscanf with a format string (it supports
both base 10 and 16 with 0xFF notation).
- modified files: gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h
- also other browse buttons were somewhat broken in that they didn't
set the initial value of the wxFileDialog. Now all text fields
with a browse button use a single function BrowseTextCtrl() to
avoid future problems of this sort.
- if the Ok on the MemoryConfigDialog is rejected because the integers
can't be parsed, now give a more specific error message that points you
to which field has the illegal value.
- print hex numbers with CAPS. With proportional font this is much
easier to read.
- accept either strings with base 10 or 16 numbers in GetTextCtrlInt by
default. If the sscanf fails, accept anything that strtoul can
read. Unfortunately legitimate "-1"'s being returned from strtoul will
be rejected, but at present there is no need for negative numbers in
textfields anywhere.
- modified files: gui/wxdialog.cc gui/wxdialog.h
and also the optional rom settings. I think it all works except that
the Browse buttons aren't hooked up yet.
- modified Files: gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h
die, or ask the user for each type of event. It has a button that
will lead to the "advanced" dialog, which doesn't exist yet.
- in gui/wxdialog.h, sketch a few more dialogs to be done soon
- modified: gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h
- for all modal dialogs that return a boolean result, return either
wxOK or wxCANCEL instead of 0,-1.
- you can view the NetConfigDialog box if you choose the Edit:Network menu
item, but it's not connected to the actual parameter values yet.
into normal C strings. After asking about it on wx-users, I understand
it better now.
Example of unsafe code:
char *filename = dlg.GetFilename().c_str ();
printf ("file name is %s\n", filename);
The problem is that dlg.GetFilename() returns a temporary wxString
that goes out of scope at the end of that line of code. The "filename"
string is unstable if you write it this way.
Example of safe code:
char filename[1024];
wxString fn (dlg.GetFilename ());
strncpy (filename, fn.c_str (), sizeof(filename));
printf ("file name is %s\n", name);
Now we have a stable copy of the wxString in "fn" which is usable
as long as fn is in scope.
- also now we use wxStrings (almost) all the time in the interface to the
wxdialogs. Any conversion from char* to wxString and back is done in
wxmain.cc now.
- HDConfigDialog now uses an EnableChanged() method to set the enabled bit
on components controlled by the enable checkbox.
- now sets the present bit on hard disks and cdrom
- enforces the rule that you can't have DISKD and CDROMD (just in time for
Christophe to add another interface)
- now the megabytes field is a wxStaticText, which makes it clear that
it cannot be edited.
- add "enter size/compute geometry" button for HD image
- make a few more strings into #defines in wxdialog.h
- disable most of the Edit menu during simulation, reenable it when
simulation stops
choose the filename and capacity of a floppy image. This dialog
can recognize a list of names as physical disk drives, and it has a
Browse button so that you can click on a new image intead of having
to type it. If you press ok, then the Bochs parameters are updated.
- eventually we should make a function that makes a list of the
physical devices that should be mentioned here. For Windows it should
say "Physical drive A:" for "a:", while on Linux it should say
"Physical drive fd0" for "/dev/fd0" or something. Even if bochs
doesn't find the correct physical disk drives, you can still type
whatever file name you want.
gui/wxdialog.h and gui/wxdialog.cc. The first dialog box is
called LogMsgAskDialog. It displays panic messages and asks if you
want to continue, quit, etc.
I use setjmp() to save the context just before calling
bx_continue_after_config_interface(). Then, in
bx_real_sim_c:quit_sim, I use longjmp() to jump back to that context.
This happens in main.cc and in gui/wxmain.cc (wxWindows only).
I haven't tested with the debugger yet. Possibly with debugger
the quit longjmp() should jump back to the debugger prompt loop
instead of actually quitting the program.
- clean up BX_ASYNC_EVT_LOG_MSG implementation by creating a different,
synchronous event called BX_SYNC_EVT_LOG_ASK. The async event
could be used to simply tell the CI that an event has occurred,
for example if the user wanted to view the events on screen
(not implemented). The sync event is used when you want the user
to respond before the simulation can continue, such as a for the
"panic=ask" behavior.
- in wxmain.cc, move the updates to the Start,Stop,Pause,Resume menu
items into a separate method simStatusChanged(). This makes the code that
does important stuff more readable.
- remove wxMutexGuiEnter()/Leave() from MyFrame::OnSim2CuiEvent().
This method is an event handler called in the gui thread, so it
already has the gui lock. This call caused thread lock on my linux
box.
the terminology a bit. In particular, the term "gui" has started
to mean different things in different contexts, so I've defined
some more specific names for the parts of the user interface, and
updated comments and some variable names to reflect it. See
siminterface.h for a more complete description of all of these.
VGAW: VGA display window and toolbar buttons, the traditional Bochs
display which is ported to X, win32, MacOS X, etc. Implemented
in gui/gui.* and platform dependent gui/*.cc files.
CI: configuration interface that lets the user change settings such
as floppy disk image, ne2k settings, log options. The CI consists
of two parts: configuration user interface (CUI) which does the
actual rendering to the screen and handles key/mouse/menu events,
and the siminterface object.
CUI: configuration user interface. This handles the user interactions
that allow the user to configure Bochs. To actually change any
values it talks to the siminterface object. One implementation of
the CUI is the text-mode menus in gui/control.cc. Another
implementation is (will be) the wxWindows menus and dialogs in
gui/wxmain.cc.
siminterface: the glue between the CUI and the simulation code,
accessible throughout the code by the global variable
bx_simulator_interface_c *SIM;
Among other things, siminterface methods allow the simulator to ask the
CUI to display things or ask for user input, and allows the CUI
to query and modify variables in the simulation code.
GUI: Literally, "graphical user interface". Until the configuration menus
and wxWindows came along, everyone understood that "gui" referred to the
VGA display window and the toolbar buttons because that's all there
was. Now that we have the wxWindows code, which implements both the VGAW
and the CUI, while all other platforms implement only the VGAW, it's not
so clear. So, I'm trying to use VGAW, CI, and CUI consistently since
they are more specific.
control panel: This has been used as another name for the configuration
interface. "control panel" is also somewhat unspecific and it sounds
like it would be graphical with buttons and sliders, but our text-mode
thing is not graphical at all. I've replaced "control panel" with
"configuration interface" wherever I could find it. In configure script,
the --disable-control-panel option is still supported, but it politely
suggests that you use --disable-config-interface instead.
- clean up comments in siminterface,wx* code
- add comments and examples for bx_param_* and BxEvents
- remove some obsolete stuff: notify_*_args,
bx_simulator_interface_c::[sg]et_enabled() methods
- in siminterface.cc, move a few bx_real_sim_c methods to where they belong,
with the rest of the methods. No changes to the actual methods.
- remove some DOS ^M's which crept in and confused my editor.
- loading default bochsrc for the wx gui no longer necessary
- the wx gui version of bochs now accepts the same command line arguments as
the other guis
to "*_ENABLED"
- bx_serial_options for all 4 ports moved into an array com[4]
- serial port com1 is enabled by default
- detection of com2, com3 and com4 config options disabled for now
- new parameter "enabled" added to the serial bochsrc options
- error handling for serial and parallel bochsrc options changed. The unhandled
BX_PANICs are replaced by BX_ERRORs.
- new function bx_write_serial_options() added
- serial destructor restores original terminal settings only when serial port
is enabled and the tty_id is valid
parport1 with the new option "enabled". The old option "enable" only
controlled the output. The parport1 is enabled with no output by default.
Changes:
* bochrc option "enable" replaced by "enabled"
* parport option "Oenable" replaced by "Opresent"
* bx_parport_options par1 and par2 replaced by an array par[2]
* initialize parport1 resources only when enabled
* renamed variable "parport_init_list" to "par_ser_init_list" since it
contains parport and serial options
* documentation and bochsrc updates
- the parport variables "output" and "initmode" now belong to the bx_par_t
structure
- TODO: add parport2 (disabled by default), parport detection in the bios
(from plex86 curses.cc)
- set the log action for the log level "panic" to "fatal", because the "ask"
menu causes trouble in the terminal
- logfile output to stderr not allowed
- handle_events(): type of variable 'character' must be 'int'
- two terminal chars added in function get_term_char()
- bit 7 of the vga attribute enables the A_REVERSE flag of the terminal char
(from plex86 curses.cc)
- variable term_attr no longer necessary in function text_update()
- function keys are working now
- clear_screen() function works now
- a few special vga characters converted to terminal characters
- exit() now clears the screen and calls endwin()
- "[TERM]" removed from info/error messages
- debug messages changed to BX_DEBUG
bitmaps. The bochs window now consists of 3 windows: the main window and
it's child windows simulation window and toolbar window.
Changes:
- new windows "mainWnd" and "simWnd" replace the old "hwnd"
- moved the functions of the old window procedure to the new ones
- toolbar functions added in create_bitmap(), headerbar_bitmap() and
replace_bitmap()
- function show_headerbar() no longer needed (must be present for
compatibility)
- a few variables for the headerbar changed or removed
- bitmap and headerbar variables now initialized in specific_init()
the guest OS. The shortcut can be defined in the bochsrc or in the config
interface. It is possible to change it at runtime.
These shortcuts are currently recognized:
ctrlaltdel, ctrlaltesc, ctrlaltf1, alttab
Here is the list of changes:
* userbutton.h and userbutton.xpm added in gui/bitmaps
* config options for the userbutton shortcut added
* initialize the new button in the gui.cc
* the new userbutton handler generates keypresses and relaeses depending on
the shortcut keyword
* the gui stops adding buttons to the headerbar if not enough space is left.
This can happen when the screen width is 320 pixels (done for X11 only).
* TODO: build a dialog box for the wxWindows gui
more work in the floppy and bios code.
- floppy and cdrom entries in the runtime config menu can be disabled if the
drive wasn't defined in bochsrc or start menu
- floppy variable "initial_status" and cdrom variable "inserted" renamed to
"status"
- unused variable *ips in function build_runtime_options_prompt() disabled
* new floppy type 360k can be used in .bochsrc and the config interface
* media type and geometry can be set for the floppy type
* BIOS changes to make 360k floppy drives work
* bximage can create 360k images now
to describe the format of the log prefix. This option can be any string
with special tokens being replaced at run time :
# %t : 11 decimal digits timer tick
# %i : 8 hexadecimal digits of cpu0 current eip
# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
# %d : 5 characters string of the device, between brackets
the default is "%t%i%d", so the logprefix is the same as before.
New tokens can be easily added or changed if needed.
Modified Files:
.bochsrc bochs.h logio.cc main.cc gui/control.cc
gui/siminterface.h gui/siminterface.cc
patches/patch.logfilefmteip
* dimension_update() stores the global variables columns, rows and
font_height_orig; it uses X font sizes to recalculate the screen size
* text_update() uses the columns, rows and X font sizes when redrawing the
screen; it adjusts the cursor shape using the font sizes
- The emulated vga card issues a dimension_update() using the real
screen dimensions and the real font height.
- The gui selects a font with the requested height or it recalculates
the screen height if the font height is not available.
- The text_update() function uses a new variable 'ncols' instead of the
fixed value of 80 for the number of text columns.
I have tested the changes with X11/Linux, SDL, wxGTK and win32. The changes
in the other guis are not tested yet.
all of the window especially after a resize". This causes screen corruption
on my win98 box whenever Bochs changes resolution, so I removed it from cvs
and checked it in as patches/patch.win32-resize instead.
- added toggle_mouse_enable() call to the handling of the middle mouse button
- removed break statement between SDL_MOUSEBUTTONDOWN and SDL_MOUSEBUTTONUP
- added prefix "SDL" in specific init
GUI specific paste functions for X11 and WIN32 in paste_handler() moved to
the new function
- get_clipboard_text() prepared for other GUIs
- set_clipboard_text() has now a return value (0 = failed or not implemented)
- use portable code in copy_handler() if set_clipboard_text() fails
- snapshot_handler() prepared for adding a file dialog call
- writing snapshot file in binary mode (LF->CRLF conversion already done)
GUI specific copy functions for X11 and WIN32 in copy_handler() moved to
the new function
- set_clipboard_text() prepared for other GUIs
- value of text mode cursor variables fixed (and renamed in x.cc)
- BX_ERROR message in snapshot_handler() fixed
- paste: grabbing the data from the clipboard in win32 was not implemented
at all. I found some example code on usenet and adapted it for Bochs.
- keymap: now if you call loadKeymap with NULL for the function pointer,
it just fills in all the X windows keysyms with zero. Added a call
to loadKeymap in win32.cc.
copy to the clipboard so I removed them.
- I was having cygwin compile problems because <windows.h> was not always
included when compiling this file. Add an include of <windows.h> at
the top, and now it compiles in cygwin.
Here are the patches (without the serial name fix). Let me know if you want
me to change that. Oh, FYI, my changes also open up the com1 terminal in raw
mode, which makes the emulation much more accurate. You'll also notice that
I added infrastructure for com2->4 in the option parsing. I didn't add it to
the serial code, as I think a bunch of things need to be untangled before
that can work.
Added control for 80x50 fonts
Added mouse input
Added mouse grabbing
Added automatic mouse grabbing when entering full screen
Added autoremoval of header when going fullscreen
Simplified a couple of graphic routines
interface menus. Parallel port #1 is implemented, and I left stubs for
parallel port #2 in case we want to ever add it. If the parallel port
is enabled, the init method of parallel.cc does an fopen() on the output
file. If disabled, or if the fopen fails, the file handler remains
NULL and no characters are printed. There is no attempt to enable/disable
the operation of the parallel port, only the output to a file.
removed! I used this trick sometimes to check that a function returned
what I expected, like assert (func () == 0), but this caused the
func() to never get called. Oops.
will dump core, and the core can sometimes be loaded into the debugger
to give some hints as to what is going on. This could be especially
useful when the bochs debugger is off.
- try to do something reasonable when abort() doesn't exist on the system.
which were generated with gcc -MM to the end of each Makefile.in
so that make understands which files depend on which. Basically,
everything depends on bochs.h, which depends on everything, which
is not ideal.
- rework the order of initialization with and without the control panel.
The thing that was bothering me most was the command line options were
being processed after the user had set everything in the control panel.
This is clearly not what's expected--the command line options should
affect the startup defaults of the control panel, but whatever the user
chooses in the cpanel menus is the final choice.
- if the control panel (config interface) is not wanted, the user can
put "-nocp" or "-nocontrolpanel" as the FIRST argument on the command
line. Also, the "-psn" option which is automatically passed in by
MacOS X when you doubleclick the application causes the control panel
to be disabled. In this case, the order of operations is:
1. read bochsrc
2. parse command line options.
- if the control panel is enabled (default), the command line options are
parsed to provide the startup defaults for the control panel, but the
control panel settings are the final answer. So the order is:
1. parse command line options
2. run control panel (if user chooses, he can read bochsrc from menus)
- I haven't tested command line options with the debugger yet.
--with-amigaos is allowed and sets up the makefiles correctly. It
defines a symbol called BX_WITH_AMIGAOS, which should be used in
#if..#endif constructs that are specific to amigaos.
- if --enable-cdrom is used with --with-amigaos, the cdrom_amigaos.o
object file will be added to CDROM_OBJS in the iodev makefile.
X servers that I've seen, however on other X servers it makes all
key mappings into absolute junk. We need to continue to work on this
patch to support all X servers and all key maps.
<dieter.mittelmaier@freenet.de> which fixes X11 keyboard mapping
on German keyboards using Keycodes instead of Keysyms.
His comments are:
> I mapped your BX_KEY-defines in gui.h to values from XFree
> ../keycodes/Xfree86. Keysyms in x.cc would now translated
> to keycodes. Now I can use german or us keyboard-layout in
> win95 and all works well.
> Note: Changing keyboard layout in win95 to en works too
> Also you must change keyboard setup in win95 to AT-Enhanced 101/102 keyboard
which notifies them that the mouse_enabled bit has changed. Now that
mouse_enabled can be initialized or modified by parameter events in
addition to GUI events, the guis must be prepared for it. I have pasted
empty method definitions into mouse_enabled_changed_specific for all
guis except for X11, which I did the right way. The implementation
of this function must use the argument "val" rather than reading the
parameter.
goes in/out of mouse capture mode. This is critical because
bx_options.Omouse_enabled is used to control whether the mouse
events are sent into the hardware queue or not (keyboard.cc).
This is only a partial fix though, because changing the mouse
enabled setting in the control panel has no effect on the gui.
control panel are all implemented as bx_list_c, and look much like
they did before.
- removed many hardcoded UI functions from control.cc, since the
much more general "text_ask" methods have replaced them.
- add range checking on integer parameter values. This exposed several
cases where my initial value for an integer parameter was not in range.
- cleaned up behavior of get/set methods. The get/set methods allow the
handler to override the value that is returned/set, or perform side
effects.
- the title parameter of a bx_list_c now defaults to the name.
- now bx_param_c fields that used to be private are protected instead
- removed references to bx_any
- moved definition of set_handler from siminterface.h to siminterface.cc.
I was considering with doing a "set" of the old value when the
handler is first installed, but that remains commented out.
- BX_BOOT_DISKA and BX_BOOT_DISKC are now 0,1 so that they can correspond
with the values of a bx_param_enum_c. For a while they were 0x00 and 0x80
corresponding to the numbering convention of the bios, but it didn't
really matter.
been converted into parameters temporarily have the letter "O" appended
to their name. I don't want to keep it this way, but it has helped
in the conversion process because the compiler refuses to compile the
old uses of the name. Before I started using the "O" trick, there were
many bugs like this: if (bx_options.diskc.present) {...}
This was legal with the new parameters, but it was testing whether the
parameter structure had been created, instead of testing the value of
the present parameter. Renaming present to Opresent turns this into
a compile error, which points out the incorrect use of the param.
- the "--disable-control-panel" no longer works, I'm afraid. I can no
longer support this and continue progress.
crash in the mouse code. The particular problem was that init_done
was never initialized to zero, but it always turned out to be zero
on my system. This may explain why it worked for me but crashed
for him.
