- bx_shadow_bool_c: removed unused bitnum feature and changed data type.
- Changed return type of memory handlers to bool.
- Modified virtual timer, PIC and PIT code.
- Fixed PCI BAR initialization (now using memset()).
- Fixed reset failure (set all PAM memory types to ROM).
- Added stub for the AGP aperture (register BAR #0, handle APSIZE and read
GART entry in read/write handlers).
- Added some more PCI register defaults and write masks.
- Fixed a warning in the ES1370 code.
- Voodoo Banshee: set up PCI subsystem ID depending on bus and model.
- Volatile BIOS write support must also be present in ISA BIOS memory.
- Added new PCI chipset choice for the i440BX AGPset. Some basic work is done,
but AGP support is not present yet.
- Added new class for the "virtual" PCI-to-PCI bridge that should manage the
secondary bus (AGP). Since this device must appear with device number #1 at
the primary bus, it was required to change the PCI device numbers for the
i440BX case. Moved the PIIX4 module to device number #7. The presence of the
PCI base address regions now depends on the header type as expected.
- Since the Bochs BIOS cannot handle the modified PCI device layout, all tests
continued with an external BIOS designed for this chipset (GA-6BA_F1.bin).
This BIOS requires additional changes in some devices.
- ACPI: Return value 0 for some status registers and the GPI registers.
- CMOS: Since the PIIX4 supports a 256 byte CMOS RAM, prepared support for it
and enable it in case a 256 byte CMOS image is used.
- PCI: The device numbers for 4 slots starting at #8. The 5th slot could be
used for AGP when available.
bx_devmodel_c. The early version of the combined vga / svga_cirrus code
required the now obsolete implementation. Some related cleanups in the
devices code.
- Since the pci_read_handler() method is identical in most devices, move it
to the base class to reduce code duplication. Only the 'pcidev' device has
it's own implementation (NOTE: it is not maintained yet).
- Minor other fixes and cleanups in some PCI devices.
- renamed config parameter "i440fx_support" to "enabled"
- new config parameter "chipset" added (current choices "i430FX" and "i440FX")
- don't load ACPI support if the i430FX chipset is selected
- select register values for the core PCI devices depending on the chipset
- USB UHCI must be connected to a PCI slot if the i430FX chipset is used
- rombios changes to make the i430FX chipset work
- TODO #1: implement limitation to 1 cpu and 128 MB RAM for the i430FX chipset
- TODO #2: verify register behaviour of both chipsets
- PCI slot configuration, memory and i/o BAR registration, PCI i/o space
handlers now present in devices.cc
- configure: E1000 emulation and USB support need PCI
- vga: fixes for the non-PCI case
- ne2k: replaced debugger command 'info ne2k' completely by a new version based
on 'info device' with additional arguments and removed all of the now obsolete
stuff (ne2k device stub, macro for print_info())
- pci: added option 'dump=full' for the debugger command 'info device' to show
the whole PCI config space
- TODO: some other devices could have support for additional options in
debug_dump()
of the device specified in 'string'. Added register mechanism and chained
list to store the device name and pointer. Replace hardcoded debug info
implementations for pic, pci and vga by the new one.
- TODO #1: improve existing debug_dump() output and add more devices
- TODO #2: add support for additional arguments and replace the NE2k print_info()
- store memory type array in the memory object to avoid calling the pci plugin
frequently. The pci code calls a memory method to change the memory type in
case the PAM registers are modified.
- removed now obsolete code and minor cleanups
Make save/restore default feature, the configure option for save/restore removed from configure script and save/restore made available forever. All code now assume it is exists. Bochs save/restore tree previosly called "save_restore" renamed to "bochs" tree and it will be havily used everywhere, starting from save/restore and ending by various bochs debugger functions. I am going to rework debugger code to get rid of debug CPU access functions and use this "bochs" param tree instead
* up to 5 slots can be specified with the 'i440fxsupport' config option
* the pci slot number are hardwired to pci device numbers
* the 'devfunc' value is returned the calling device (useful for multi-function
devices)
* the core of the i440FX chipset is hardwired to pci device 1 + 2; usb is still
optional and appears at device 1, function 2
- ne2k: enable pci features if connected to a pci slot
- ne2k: asic data port supports 32-bit access if ne2k-pci is active
- pci2isa: improved error messages for ELCR1 and ELCR2
- new symbol BX_USE_PCIVGA_SMF for the experimental PCI VGA device
- pcivga.cc: removed unnecessary include statement
- pcivga.cc: fixed two warnings
- pcivga.h: removed unnecessary symbol BX_IODEV_PCIVGA_H
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
Some devices already had one. Some I had to add an empty one.
I did a little cleaning of init() methods to make them more uniform
but generally I left them alone.
- I also put these exact diffs into a patch "patch.iodev-add-reset"
in case I want to revert these changes for some reason, for example
if they break an old patch. It should be deleted after a while.
- PCI configuration space of the host bridge renamed from array[] to pci_conf[]
- new functions load_ROM() and mem_read() for ROM access
- macros for PCI functions defined in bochs.h
The new function register_pci_handlers() is similar to the register functions
for i/o addresses. A PCI device can register the read/write handlers for it's
private PCI configuration space. The i/o mapped registers of the host bridge
control the access to the configuration registers of each PCI device. You can
select the bus, device, function and register address with the confAddr
register. The confData register is a window to the configuration space of the
selected device.
- reset sets the values of the i/o mapped registers to 0
- changed some BX_INFO messages to BX_DEBUG
To see the commit logs for this use either cvsweb or
cvs update -r BRANCH-io-cleanup and then 'cvs log' the various files.
In general this provides a generic interface for logging.
logfunctions:: is a class that is inherited by some classes, and also
. allocated as a standalone global called 'genlog'. All logging uses
. one of the ::info(), ::error(), ::ldebug(), ::panic() methods of this
. class through 'BX_INFO(), BX_ERROR(), BX_DEBUG(), BX_PANIC()' macros
. respectively.
.
. An example usage:
. BX_INFO(("Hello, World!\n"));
iofunctions:: is a class that is allocated once by default, and assigned
as the iofunction of each logfunctions instance. It is this class that
maintains the file descriptor and other output related code, at this
point using vfprintf(). At some future point, someone may choose to
write a gui 'console' for bochs to which messages would be redirected
simply by assigning a different iofunction class to the various logfunctions
objects.
More cleanup is coming, but this works for now. If you want to see alot
of debugging output, in main.cc, change onoff[LOGLEV_DEBUG]=0 to =1.
Comments, bugs, flames, to me: todd@fries.net
