Averything that required cpu.h include now has it explicitly and there are a lot of files not dependant by CPU at all which will compile a lot faster now ...
I would like all next commits be aware of SMM mode.
It can't be implemented right now (too many questions w/o answers) but it will be done till next major release definitelly.
Setting the eip register still not available (deliberatelly).
I don't want to enable it util I find some easy interface to do it.
I don't want to allow setting of part of RIP register using 'set eip=<expr>' and leave the upper part unchanged ....
Remove unused test registres from debugger
Fix compilation error in cpu.h
Change trace-on/trace-off commands. Make one 'trace' command with usage of 'trace on/trace off'
Enable disasm by default - in adds some useful information to debug messages in log file
Remove defines for 8bit registers from cpu.h, the x86 arch defines not match defines used by set_reg and get_reg methods.
The Bochs anyway even doesn't compile if cosimulation configured enabled.
But in the same time the cosimulation code only disturbs to the future development of Bochs debugger, for example adding x86-64 functionality ...
For those of you who still may want to see the cosimulation code inside I put it in patch and upload it Bochs CVS patches folder. Read comments for the patch ! ----------------------------------------------------------------------
'set $eax = <value>' is stupid when you could do expr like 'set eax = ebx + 4'
2. cleanup and optimize Bochs debugger parsing, fixed several memory leaks
2. new command 'u|disasm|disassemble mode-switch' - switch between Intel and AT&T disasm syntax
3. new command 'u|disasm|disassemble size=n' should be used instead of old 'set $disassembler_size=n'
4. 'h' is a new alias for 'help' command
Fixed fetch mode mask initialization (bug report 1400027 Boundary instruction cache error for uninitialized memory)
For safety only - everytime when changing CS register update fetch mode mask.
Actually it need to be updated everytime when there is a chance for execute mode change or 16/32 bit mode change.
Change BxSupportPAE and BxSupportGlobalPages macros to Bochs style names
Set bx_cpu_id in BX_CPU_C constructor (safe way)
Backup cpu-level check for paging features at compile time (already checked in configure)
Some warnings and indent fixes
speed up get_segment_base method for x86-64 case
* Fully supports
* MMX/XMM/3DNOW instruction sets
* FPU instruction
* SSE3 extensions
currently only 16/32 bit mode bug anyway, it is much better that old one ;)
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
Used patch.disasm to do
1) clean up the disasm output to make the dispaly of extra stuff optional.
2) included the part of the patch which displays displacements as
proper addresses.
use getB_CF() etc. getB_CF() and friends are only for a relatively
small number of cases where a true boolean/binary number (0 or 1) is required
rather than 0 or non-0 as is returned by get_CF().
of (1 & (val32>>N)), and added a getB_?F() accessor for special
cases which need a strict binary value (exactly 0 or 1). Most
code only needed a value for logical comparison. I modified the
special cases which do need a binary number for shifting and
comparison between flags, to use the special getB_?F() accessor.
Cleaned up memory.cc functions a little, now that all accesses
are within a single page.
Fixed a (not very likely encountered) bug in fetchdecode.cc (and
fetchdecode64.cc) where a 2-byte opcode starting with a prefix
starts at the last offset on a page. There were no checks
on the segment overrides for a boundary condition. I added them.
The eflags enhancements added just a tiny bit of performance.
cpu64 directories. Instead of using the macros introduced in cpu.h rev 1.37
such as GetEFlagsDFLogical and SetEFlagsDF and ClearEFlagsDF, I made inline
methods on the BX_CPU_C object that access the eflags fields. The problem
with the macros is that they cannot be used outside the BX_CPU_C object. The
macros have now been removed, and all references to eflags now use these new
accessors.
- I debated whether to put the accessors as members of the BX_CPU_C object
or members of the bx_flags_reg_t struct. I chose to make them members
of BX_CPU_C for two reasons: 1. the lazy flags are implemented as
members of BX_CPU_C, and 2. the eflags are referenced in many many places
and it is more compact without having to put eflags in front of each. (The
real problem with compactness is having to write BX_CPU_THIS_PTR in front of
everything, but that's another story.)
- Kevin pointed out a major bug in my set accessor code. What a difference a
little tilde can make! That is fixed now.
- modified: load32bitOShack.cc debug/dbg_main.cc
and in both cpu and cpu64 directories:
cpu.cc cpu.h ctrl_xfer_pro.cc debugstuff.cc exception.cc flag_ctrl.cc
flag_ctrl_pro.cc init.cc io.cc io_pro.cc proc_ctrl.cc soft_int.cc
string.cc vm8086.cc
a consistent way of accessing these flags that works both inside and
outside the BX_CPU class, I added inline accessor methods for each
flag: assert_FLAG(), clear_FLAG(), set_FLAG(value), and get_FLAG ()
that returns its value. I use assert to mean "set the value to one"
to avoid confusion, since there's also a set method that takes a value.
- the eflags access macros (e.g. GetEFlagsDFLogical, ClearEFlagsTF) are
now defined in terms of the inline accessors. In most cases it will
result in the same code anyway. The major advantage of the accesors
is that they can be used from inside or outside the BX_CPU object, while
the macros can only be used from inside.
- since almost all eflags were stored in val32 now, I went ahead and
removed the if_, rf, and vm fields. Now the val32 bit is the
"official" value for these flags, and they have accessors just like
everything else.
- init.cc: move the registration of registers until after they have been
initialized so that the initial value of each parameter is correct.
Modified files:
debug/dbg_main.cc cpu/cpu.h cpu/debugstuff.cc cpu/flag_ctrl.cc
cpu/flag_ctrl_pro.cc cpu/init.cc
All the EFLAGS bits used to be cached in separate fields. I left
a few of them in separate fields for now - might remove them
at some point also. When the arithmetic fields are known
(ie they're not in lazy mode), they are all cached in a
32-bit EFLAGS image, just like the x86 EFLAGS register expects.
All other eflags are store in the 32-bit register also, with
a few also mirrored in separate fields for now.
The reason I did this, was so that on x86 hosts, asm() statements
can be #ifdef'd in to do the calculation and get the native
eflags results very cheaply. Just to test that it works, I
coded ADD_EdId() and ADD_EwIw() with some conditionally compiled
asm()s for accelerated eflags processing and it works.
-Kevin
