performance of the ne2K driver in win9x."
- receive timer set to 10000 instructions instead of 1000000.
- placed if (WaitForSingleObject(lpAdapter->ReadEvent,0) == WAIT_OBJECT_0) {}
around the read code.
to request bulk IO operations to IO devices which are bulk IO aware.
Currently, I modified only harddrv.cc to be aware. I added some
fields to the bx_devices_c class for the IO instructions to
place requests and receive responses from the IO device emulation.
Devices except the hard drive, don't monitor these fields so they
respond as normal. The hard drive now monitors these fields for
bulk requests, and if enabled, it memcpy()'s data straight from
the disk buffer to memory. This eliminates numerous inp/outp calling
sequences per disk sector.
I used the fields in bx_devices_c so that I would not have to
disrupt most IO device modules. Enhancements can be made to
other devices if they use high-bandwidth IO via in/out instructions.
vga_charmap
- the SDL gui uses the charmap data for the vga text display
* TODO: implement this feature for other guis
- removed unused variables in sdl.cc and gui.cc
- fixed a warning in vga.cc
- modified files: config.h.in cpu/init.cc debug/dbg_main.cc gui/control.cc
gui/siminterface.cc gui/siminterface.h gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h iodev/keyboard.cc
----------------------------------------------------------------------
Patch name: patch.wx-show-cpu2
Author: Bryce Denney
Date: Fri Sep 6 12:13:28 EDT 2002
Description:
Second try at implementing the "Debug:Show Cpu" and "Debug:Show
Keyboard" dialog with values that change as the simulation proceeds.
(Nobody gets to see the first try.) This is the first step toward
making something resembling a wxWindows debugger.
First, variables which are going to be visible in the CI must be
registered as parameters. For some variables, it might be acceptable
to change them from Bit32u into bx_param_num_c and access them only
with set/get methods, but for most variables it would be a horrible
pain and wreck performance.
To deal with this, I introduced the concept of a shadow parameter. A
normal parameter has its value stored inside the struct, but a shadow
parameter has only a pointer to the value. Shadow params allow you to
treat any variable as if it was a parameter, without having to change
its type and access it using get/set methods. Of course, a shadow
param's value is controlled by someone else, so it can change at any
time.
To demonstrate and test the registration of shadow parameters, I
added code in cpu/init.cc to register a few CPU registers and
code in iodev/keyboard.cc to register a few keyboard state values.
Now these parameters are visible in the Debug:Show CPU and
Debug:Show Keyboard dialog boxes.
The Debug:Show* dialog boxes are created by the ParamDialog class,
which already understands how to display each type of parameter,
including the new shadow parameters (because they are just a subclass
of a normal parameter class). I have added a ParamDialog::Refresh()
method, which rereads the value from every parameter that it is
displaying and changes the displayed value. At the moment, in the
Debug:Show CPU dialog, changing the values has no effect. However
this is trivial to add when it's time (just call CommitChanges!). It
wouldn't really make sense to change the values unless you have paused
the simulation, for example when single stepping with the debugger.
The Refresh() method must be called periodically or else the dialog
will show the initial values forever. At the moment, Refresh() is
called when the simulator sends an async event called
BX_ASYNC_EVT_REFRESH, created by a call to SIM->refresh_ci ().
Details:
- implement shadow parameter class for Bit32s, called bx_shadow_num_c.
implement shadow parameter class for Boolean, called bx_shadow_bool_c.
more to follow (I need one for every type!)
- now the simulator thread can request that the config interface refresh
its display. For now, the refresh event causes the CI to check every
parameter it is watching and change the display value. Later, it may
be worth the trouble to keep track of which parameters have actually
changed. Code in the simulator thread calls SIM->refresh_ci(), which
creates an async event called BX_ASYNC_EVT_REFRESH and sends it to
the config interface. When it arrives in the wxWindows gui thread,
it calls RefreshDialogs(), which calls the Refresh() method on any
dialogs that might need it.
- in the debugger, SIM->refresh_ci() is called before every prompt
is printed. Otherwise, the refresh would wait until the next
SIM->periodic(), which might be thousands of cycles. This way,
when you're single stepping, the dialogs update with every step.
- To improve performance, the CI has a flag (MyFrame::WantRefresh())
which tells whether it has any need for refresh events. If no
dialogs are showing that need refresh events, then no event is sent
between threads.
- add a few defaults to the param classes that affect the settings of
newly created parameters. When declaring a lot of params with
similar settings it's more compact to set the default for new params
rather than to change each one separately. default_text_format is
the printf format string for displaying numbers. default_base is
the default base for displaying numbers (0, 16, 2, etc.)
- I added to ParamDialog to make it able to display modeless dialog
boxes such as "Debug:Show CPU". The new Refresh() method queries
all the parameters for their current value and changes the value in
the wxWindows control. The ParamDialog class still needs a little
work; for example, if it's modal it should have Cancel/Ok buttons,
but if it's going to be modeless it should maybe have Apply (commit
any changes) and Close.
X windows, wxWindows. Each platform has its own way of returning
a variable length string, and its own rules about how you're supposed
to dispose of the string. Now all platforms do the same thing: they
allocate a Bit8u buffer with C++ "new" and copy the clipboard data in,
then release the clipboard data in the platform-specific correct way.
The Bit8u buffer is sent to the keyboard code, which frees it with
delete [] when finished.
- modified: gui/wx.cc gui/x.cc gui/win32.cc iodev/keyboard.cc
class's prefix, NE2K. The real issue is that the ne2k class exists at
configuration time, so it is possible to tell it how to respond to
panics, errors, etc. The packet mover is created after configuration
depending on the setting of bx_options.ne2k.Oethmod, so I cannot
(with major hacks) affect its settings from the configuration interface.
Several packet movers were already set up this way anyway.
certain number of instructions. I use it for performance testing, and it
won't hurt anyone unless they are foolish enough to enable it in config.h.
Of course it is disabled by default!
Some devices already had one. Some I had to add an empty one.
I did a little cleaning of init() methods to make them more uniform
but generally I left them alone.
- I also put these exact diffs into a patch "patch.iodev-add-reset"
in case I want to revert these changes for some reason, for example
if they break an old patch. It should be deleted after a while.
to "*_ENABLED"
- bx_serial_options for all 4 ports moved into an array com[4]
- serial port com1 is enabled by default
- detection of com2, com3 and com4 config options disabled for now
- new parameter "enabled" added to the serial bochsrc options
- error handling for serial and parallel bochsrc options changed. The unhandled
BX_PANICs are replaced by BX_ERRORs.
- new function bx_write_serial_options() added
- serial destructor restores original terminal settings only when serial port
is enabled and the tty_id is valid
parport1 with the new option "enabled". The old option "enable" only
controlled the output. The parport1 is enabled with no output by default.
Changes:
* bochrc option "enable" replaced by "enabled"
* parport option "Oenable" replaced by "Opresent"
* bx_parport_options par1 and par2 replaced by an array par[2]
* initialize parport1 resources only when enabled
* renamed variable "parport_init_list" to "par_ser_init_list" since it
contains parport and serial options
* documentation and bochsrc updates
- the parport variables "output" and "initmode" now belong to the bx_par_t
structure
- TODO: add parport2 (disabled by default), parport detection in the bios
- PCI configuration space of the host bridge renamed from array[] to pci_conf[]
- new functions load_ROM() and mem_read() for ROM access
- macros for PCI functions defined in bochs.h
more work in the floppy and bios code.
- floppy and cdrom entries in the runtime config menu can be disabled if the
drive wasn't defined in bochsrc or start menu
- floppy variable "initial_status" and cdrom variable "inserted" renamed to
"status"
- unused variable *ips in function build_runtime_options_prompt() disabled
* new floppy type 360k can be used in .bochsrc and the config interface
* media type and geometry can be set for the floppy type
* BIOS changes to make 360k floppy drives work
* bximage can create 360k images now
and works okay with one rom track only. We still have to implement reading
the real TOC on win32.
- in function GetCDCapacity(): type of variable 'buf[8]' must be 'unsigned char'
- in function capacity(): win32 version returned the number of bytes, but it
should return the number of blocks (ASPI blocksize is 2352)
- description of the function capacity() fixed (it always returns blocks)
controller returns an error code until we are able to implement this feature.
- init_send_atapi_command(): don't panic if alloc_length is 0, use byte_count
to set alloc_length instead
- fixed a BX_PANIC message in the io write handler for port 0x1f0
- init(): set the initial status to BX_EJECTED if evaluate_media() fails
- don't modify the DOR when a drive > 1 is selected
- floppy command 'get status' now recognizes the head field
- floppy command 'recalibrate': don't set cylinder to 0 before completion
- floppy command 'sense interupt status' does not clear status register 0
- floppy command 'configure': more detailed BX_DEBUG messages
- floppy command 'read ID' does not modify status register 0
- floppy read/write commands: set the error bit in status register 0 if media
is not present
- better detection of not existing drives in some commands: check the media type
of the selected drive instead of the drive select value
- behaviour of floppy commands 'recalibrate' and 'seek' changed:
* drive is busy in the execution phase, but not the controller
* replaced the panic by setting the error status if drive is not existing
- evaluate_media(): set the media type even if device/file is not present
DMA functions defined. Most of the changes are based on the "bochs sync"
version of plex86. Here is the list of changes:
* register/unregister functions for DMA channels added. The DMA controller
can use the DMA read/write handlers of registered devices directly.
* "hardwired" code in dma.cc removed
* all DMA related code in devices.cc and iodev.h removed
* DMA related code in pc_system.* removed except HRQ handling
* macros for DMA functions defined in bochs.h
* floppy and SB16 code modified to use the changes described above
The new function register_pci_handlers() is similar to the register functions
for i/o addresses. A PCI device can register the read/write handlers for it's
private PCI configuration space. The i/o mapped registers of the host bridge
control the access to the configuration registers of each PCI device. You can
select the bus, device, function and register address with the confAddr
register. The confData register is a window to the configuration space of the
selected device.
- reset sets the values of the i/o mapped registers to 0
- changed some BX_INFO messages to BX_DEBUG
This means that the REALTIME_PIT now only works on machines
that are capable of sustaining 150000 IPS, in aggregate. This
seems a reasonable requirement, as even my 200Mhz PPC with 16MB
of memory can sustain that.
This is now probably ready for primetime, so I need to get it
added to the configure options.
This seems to work, but I don't think it works on slow machines (like mine.)
At least, I'm getting fails with the dlxlinux image, but they're pretty
sporadic. This code shouldn't cause any fails.
floppy_bootsig_check: disabled=[0|1]. It is not disabled by default.
Sorry for any inconvenience it could cause
- changed the default (if cmos reg is 0) behavior for the floppy boot signature
check, so the new bios is compatible with older bochs binaries (useful if we
want to use the new bios when we release 1.4.1) :
1 : disabled
0 : enabled
- added info at launch time about the boot device and the floppy boot signature
check
- added a "LBA capable" flag in the ata controller
- fixed opened netdevice name (/dev/net/tun...)
- fixed test on iface name (tun instead of tap)
- cosmetic changes
- added example in .bochsrc
Much of these fixes have been contributed by Frederic Bothamy
- The emulated vga card issues a dimension_update() using the real
screen dimensions and the real font height.
- The gui selects a font with the requested height or it recalculates
the screen height if the font height is not available.
- The text_update() function uses a new variable 'ncols' instead of the
fixed value of 80 for the number of text columns.
I have tested the changes with X11/Linux, SDL, wxGTK and win32. The changes
in the other guis are not tested yet.
cursor size issue a screen update request
- reading an invalid CRTC register returns 0 / writing is ignored
- bit 7 of CRTC address register is always 0
- debug messages for CRTC registers updated / panics removed
- use the number of visible columns in text mode when calculating the screen
width and the cursor position
. ports 0x0400 0x0401 and 0xfff0 : rombios
. ports 0x0500 0x0501 and 0x0502 : vgabios
The rombios log output was previously handled by the unmmapped device
- fixed handling of rotate_on_autoeoi for master PIC in in IAC()
- removed old IRQ handling functions (trigger_irq / untrigger_irq)
- replaced BX_INFO in case of bx_dbg.pic by BX_DEBUG calls
the SMP interrupt handling is to blame. So I'm putting the 1.46 changes
back into the code. Now keyboard.cc is exactly the same as revision 1.51
again. A copy of the changes is now in patches/patch.eks-port64 so that
they can be easily examined by SMP debugging people.
boot of linux 2.2.17 to freeze forever. I don't understand what's being
done in this rev, so I'll ask Dave to check over it and see he can find
anything suspicious.
called <linux/netlink.h> the ethertap module will be defined. If other
OSes turn up that also have ethertap, we can change the test.
- in eth_tap.cc, I replaced the calls to GPL code from maconlinux with
my own stuff.
There is a problem with the existing function rx_timer_handler. It can
retrieve multiple packets from winpcap but returns when it finds one with
the source mac address address instead of ignoring it and processing any
remaining packets.
Replacing the function with the one in the attached file rectifies this.
With this I can browse the network fairly well from the guest NT4 and indeed
see the guest NT4 from other machines on the network.
Mike Lerwill <Mike@ml-solutions.co.uk>
- at the moment we only use hFile so the other pieces of the ADAPTER struct
don't affect how this code turns out. However, it would be safer to include
the winpcap header file instead of hardcoding the structures, which are bound
to change over time.
We should really be using #defines or enums to give these constants
a proper name! Thanks to Peter Tattam <peter@jazz-1.trumpet.com.au>
for the bug report.
Here are the patches (without the serial name fix). Let me know if you want
me to change that. Oh, FYI, my changes also open up the com1 terminal in raw
mode, which makes the emulation much more accurate. You'll also notice that
I added infrastructure for com2->4 in the option parsing. I didn't add it to
the serial code, as I think a bunch of things need to be untangled before
that can work.
This is basically the opposite of the slowdown timer. Instead
of trying to keep the PIT ticks in sync with bochs time, we
keep them in sync with REAL time. This is bad because it creates
unreproducible fails, but it's good if you want to run bochs at
maximum speed on your machine. However, bochs will take all of
the available resources from the machine also.
DO NOT use this with the slowdown timer. Results would be
unpredictable.
- new functions raise_irq() and lower_irq()
- all trigger_irq() / untrigger_irq() calls are replaced by the new functions
- REMARK: timer IRQ handling is not correct but it works
- TODO: IOAPIC IRQ handling needs to be changed
- interrupt reasons modem status change and receiver line status change added
- number of data bits is considered now
- REMARK: Windows 95 driver still makes trouble
- TODO: real serial communication, FIFO, second serial port
- length of 'configure' floppy command fixed
- busy flag is set until the result of a read/write command is complete
- read/write access to unsupported address causes a BX_ERROR, not a BX_PANIC
- commented BX_INFO statements removed
* floppy command 'format track' implemented
* read and write operations with MT=0 are working now
(function 'increment_sector()' updated)
* result code of floppy command 'get status' fixed
* flag FS_MS_DIO is not set while the 'configure' floppy command is pending
* diskette controller data register returns last result if no new data
is available
* reset will be activated when the reset bit is changed to normal operation
* reset sets the error bits in status register 0
* write access to port 0x3f4 will cause a BX_ERROR now
* unsupported and invalid floppy commands are setting the error status bit
'invalid command' - BX_PANIC not necessary
* flag FS_MS_DIO is not set while a floppy command is pending
* floppy command 'specify': cause a BX_ERROR when non-DMA mode is selected
* floppy command 'sense interrupt status' returns an error is no interrupt
is pending
* floppy command 'read ID' sets the 'busy' flag and returns no data if the
motor is not on
* removed SIMX86 section (not defined in bochs)
* define variable 'sTemp' for win32 only
- fopen with "wb" so that win32 doesn't translate CRLF
- add initmode setting
- fix bug, fill in behavior in write handler
- now it works for him with DOS, Linux, and Windows guests
probably been treated as ifdef instead, but a sun compiler doesn't like
them. Anyway, they were being used around a check for irq_num > 15.
This bounds check seems ok to do all the time, so I just removed the
#if BX_DEBUG lines and corresponding #endifs.
interface menus. Parallel port #1 is implemented, and I left stubs for
parallel port #2 in case we want to ever add it. If the parallel port
is enabled, the init method of parallel.cc does an fopen() on the output
file. If disabled, or if the fopen fails, the file handler remains
NULL and no characters are printed. There is no attempt to enable/disable
the operation of the parallel port, only the output to a file.
[ #468340 ] pic:slave: OCW3 not implemented
The service_master_pic() method supported special mask mode but
service_slave_pic() did not. I added the code to service_slave_pic(). I
have no clear way to test that this is actually working right. If I can put
a gdb breakpoint in the pic.cc code and then step through and watch it work,
I'll be more confident.
I compiled Bochs on Linux and installed a linux
in it, but when I ping a machine on my LAN, I get
packet loss. Sometimes as much as 70% is lost.
So I read ne2k.cc, Linux 8390 driver and 8390 chip
specification. I find that 8390 command register START
bit is misused in ne2k.cc. According to the chip
specification, even if START=0, the chip does not stop
working.
device and disk file for a while. Even though its version of
read_toc is minimal, in fact I would say broken, it lets people use
an ISO disk file as a cdrom.
- in this revision, I wrote the "unix equivalent" of the win32 code, including
the broken version of read_toc. Now win32 and unix should act very similar
when they encounter an ISO disk image.
- one important improvement is in read_toc, I have added "*length=1" for both
win32 and unix, since otherwise the function returns random junk for the
length of the TOC. I also tried "*length=0" and that created the "lost
interrupt" behavior that psyon has been trying to get rid of...I changed it
back to *length=1 of course and left a note to him in that bug report.
which were generated with gcc -MM to the end of each Makefile.in
so that make understands which files depend on which. Basically,
everything depends on bochs.h, which depends on everything, which
is not ideal.
of just panicing. In particular, if the logical sector is out of bounds
or the disk image cannot be read/written at the desired offset, we now
abort the ATA command and return an error code. Many of the old BX_PANIC
messages are turned to BX_ERROR, so they will still appear in the
log, but now the device model will try to communicate this fact to
the OS instead of simply giving up.
I still need to do add some commands from older specs that are obsolete
(and not listed) in ATAPI-6.
- commands that aren't in the spec will still panic.
- fill in names from spec on various commands
- add command aborted for 0x08 device reset on disks (it's only for ATAPI)
- add command aborted for 0xe1 idle immediate
This is a patch from Volker Ruppert <Volker.Ruppert@t-online.de>, who
comments: "The fdisk command reports an unusable second harddisk if the cdrom
is enabled. This patch helps, but I don't know if it is the right way."
> I have inspected the header of output file and several sample MIDI files. I
> have found two different bytes in the header. After I have changed this
> bytes Winamp could play the output file, but it showed a track time of
> 0:00. The Windows Media Player still doesn't like the file.
