- now there are BX_ERROR lines for all commands from ATA/ATAPI 3,4,5,6.
This commit is contained in:
Bryce Denney
parent
1a856a1726
commit
6145266a70
@ -100,7 +100,7 @@ bx_hard_drive_c::~bx_hard_drive_c(void)
|
||||
bx_hard_drive_c::init(bx_devices_c *d, bx_cmos_c *cmos)
|
||||
{
|
||||
BX_HD_THIS devices = d;
|
||||
BX_DEBUG(("Init $Id: harddrv.cc,v 1.35 2001-09-28 22:20:49 bdenney Exp $"));
|
||||
BX_DEBUG(("Init $Id: harddrv.cc,v 1.36 2001-09-29 02:08:11 bdenney Exp $"));
|
||||
|
||||
/* HARD DRIVE 0 */
|
||||
|
||||
@ -550,68 +550,84 @@ bx_hard_drive_c::read(Bit32u address, unsigned io_len)
|
||||
// List all the read operations that are defined in the ATA/ATAPI spec
|
||||
// that we don't support. Commands that are listed here will cause a
|
||||
// BX_ERROR, which is non-fatal, and the command will be aborted.
|
||||
case 0x08: BX_ERROR(("read cmd 0x08 (DEVICE RESET) not supported"));command_aborted(0x08); break;
|
||||
case 0x24: BX_ERROR(("read cmd 0x24 (READ SECTOR(S) EXT) not supported"));command_aborted(0x24); break;
|
||||
case 0x25: BX_ERROR(("read cmd 0x25 (READ DMA EXT) not supported"));command_aborted(0x25); break;
|
||||
case 0x26: BX_ERROR(("read cmd 0x26 (READ DMA QUEUED EXT) not supported"));command_aborted(0x26); break;
|
||||
case 0x27: BX_ERROR(("read cmd 0x27 (READ NATIVE MAX ADDRESS EXT) not supported"));command_aborted(0x27); break;
|
||||
case 0x29: BX_ERROR(("read cmd 0x29 (READ MULTIPLE EXT) not supported"));command_aborted(0x29); break;
|
||||
case 0x2A: BX_ERROR(("read cmd 0x2A (READ STREAM DMA) not supported"));command_aborted(0x2A); break;
|
||||
case 0x2B: BX_ERROR(("read cmd 0x2B (READ STREAM PIO) not supported"));command_aborted(0x2B); break;
|
||||
case 0x2F: BX_ERROR(("read cmd 0x2F (READ LOG EXT) not supported"));command_aborted(0x2F); break;
|
||||
case 0x30: BX_ERROR(("read cmd 0x30 (WRITE SECTOR(S)) not supported"));command_aborted(0x30); break;
|
||||
case 0x34: BX_ERROR(("read cmd 0x34 (WRITE SECTOR(S) EXT) not supported"));command_aborted(0x34); break;
|
||||
case 0x35: BX_ERROR(("read cmd 0x35 (WRITE DMA EXT) not supported"));command_aborted(0x35); break;
|
||||
case 0x36: BX_ERROR(("read cmd 0x36 (WRITE DMA QUEUED EXT) not supported"));command_aborted(0x36); break;
|
||||
case 0x37: BX_ERROR(("read cmd 0x37 (SET MAX ADDRESS EXT) not supported"));command_aborted(0x37); break;
|
||||
case 0x38: BX_ERROR(("read cmd 0x38 (CFA WRITE SECTORS W/OUT ERASE) not supported"));command_aborted(0x38); break;
|
||||
case 0x39: BX_ERROR(("read cmd 0x39 (WRITE MULTIPLE EXT) not supported"));command_aborted(0x39); break;
|
||||
case 0x3A: BX_ERROR(("read cmd 0x3A (WRITE STREAM DMA) not supported"));command_aborted(0x3A); break;
|
||||
case 0x3B: BX_ERROR(("read cmd 0x3B (WRITE STREAM PIO) not supported"));command_aborted(0x3B); break;
|
||||
case 0x3F: BX_ERROR(("read cmd 0x3F (WRITE LOG EXT) not supported"));command_aborted(0x3F); break;
|
||||
case 0x40: BX_ERROR(("read cmd 0x40 (READ VERIFY SECTOR(S)) not supported"));command_aborted(0x40); break;
|
||||
case 0x42: BX_ERROR(("read cmd 0x42 (READ VERIFY SECTOR(S) EXT) not supported"));command_aborted(0x42); break;
|
||||
case 0x51: BX_ERROR(("read cmd 0x51 (CONFIGURE STREAM) not supported"));command_aborted(0x51); break;
|
||||
case 0x70: BX_ERROR(("read cmd 0x70 (SEEK) not supported"));command_aborted(0x70); break;
|
||||
case 0x87: BX_ERROR(("read cmd 0x87 (CFA TRANSLATE SECTOR) not supported"));command_aborted(0x87); break;
|
||||
case 0x90: BX_ERROR(("read cmd 0x90 (EXECUTE DEVICE DIAGNOSTIC) not supported"));command_aborted(0x90); break;
|
||||
case 0x92: BX_ERROR(("read cmd 0x92 (DOWNLOAD MICROCODE) not supported"));command_aborted(0x92); break;
|
||||
case 0xA2: BX_ERROR(("read cmd 0xA2 (SERVICE) not supported"));command_aborted(0xA2); break;
|
||||
case 0xB0: BX_ERROR(("read cmd 0xB0 (SMART DISABLE OPERATIONS) not supported"));command_aborted(0xB0); break;
|
||||
case 0xB1: BX_ERROR(("read cmd 0xB1 (DEVICE CONFIGURATION FREEZE LOCK) not supported"));command_aborted(0xB1); break;
|
||||
case 0xC0: BX_ERROR(("read cmd 0xC0 (CFA ERASE SECTORS) not supported"));command_aborted(0xC0); break;
|
||||
case 0xC4: BX_ERROR(("read cmd 0xC4 (READ MULTIPLE) not supported"));command_aborted(0xC4); break;
|
||||
case 0xC5: BX_ERROR(("read cmd 0xC5 (WRITE MULTIPLE) not supported"));command_aborted(0xC5); break;
|
||||
case 0xC6: BX_ERROR(("read cmd 0xC6 (SET MULTIPLE MODE) not supported"));command_aborted(0xC6); break;
|
||||
case 0xC7: BX_ERROR(("read cmd 0xC7 (READ DMA QUEUED) not supported"));command_aborted(0xC7); break;
|
||||
case 0xC8: BX_ERROR(("read cmd 0xC8 (READ DMA) not supported"));command_aborted(0xC8); break;
|
||||
case 0xCA: BX_ERROR(("read cmd 0xCA (WRITE DMA) not supported"));command_aborted(0xCA); break;
|
||||
case 0xCC: BX_ERROR(("read cmd 0xCC (WRITE DMA QUEUED) not supported"));command_aborted(0xCC); break;
|
||||
case 0xCD: BX_ERROR(("read cmd 0xCD (CFA WRITE MULTIPLE W/OUT ERASE) not supported"));command_aborted(0xCD); break;
|
||||
case 0xD1: BX_ERROR(("read cmd 0xD1 (CHECK MEDIA CARD TYPE) not supported"));command_aborted(0xD1); break;
|
||||
case 0xDA: BX_ERROR(("read cmd 0xDA (GET MEDIA STATUS) not supported"));command_aborted(0xDA); break;
|
||||
case 0xDE: BX_ERROR(("read cmd 0xDE (MEDIA LOCK) not supported"));command_aborted(0xDE); break;
|
||||
case 0xDF: BX_ERROR(("read cmd 0xDF (MEDIA UNLOCK) not supported"));command_aborted(0xDF); break;
|
||||
case 0xE0: BX_ERROR(("read cmd 0xE0 (STANDBY IMMEDIATE) not supported"));command_aborted(0xE0); break;
|
||||
case 0xE1: BX_ERROR(("read cmd 0xE1 (IDLE IMMEDIATE) not supported"));command_aborted(0xE1); break;
|
||||
case 0xE2: BX_ERROR(("read cmd 0xE2 (STANDBY) not supported"));command_aborted(0xE2); break;
|
||||
case 0xE3: BX_ERROR(("read cmd 0xE3 (IDLE) not supported"));command_aborted(0xE3); break;
|
||||
case 0xE4: BX_ERROR(("read cmd 0xE4 (READ BUFFER) not supported"));command_aborted(0xE4); break;
|
||||
case 0xE5: BX_ERROR(("read cmd 0xE5 (CHECK POWER MODE) not supported"));command_aborted(0xE5); break;
|
||||
case 0xE6: BX_ERROR(("read cmd 0xE6 (SLEEP) not supported"));command_aborted(0xE6); break;
|
||||
case 0xE7: BX_ERROR(("read cmd 0xE7 (FLUSH CACHE) not supported"));command_aborted(0xE7); break;
|
||||
case 0xE8: BX_ERROR(("read cmd 0xE8 (WRITE BUFFER) not supported"));command_aborted(0xE8); break;
|
||||
case 0xEA: BX_ERROR(("read cmd 0xEA (FLUSH CACHE EXT) not supported"));command_aborted(0xEA); break;
|
||||
case 0xED: BX_ERROR(("read cmd 0xED (MEDIA EJECT) not supported"));command_aborted(0xED); break;
|
||||
case 0xEF: BX_ERROR(("read cmd 0xEF (SET FEATURES) not supported"));command_aborted(0xEF); break;
|
||||
case 0xF1: BX_ERROR(("read cmd 0xF1 (SECURITY SET PASSWORD) not supported"));command_aborted(0xF1); break;
|
||||
case 0xF2: BX_ERROR(("read cmd 0xF2 (SECURITY UNLOCK) not supported"));command_aborted(0xF2); break;
|
||||
case 0xF3: BX_ERROR(("read cmd 0xF3 (SECURITY ERASE PREPARE) not supported"));command_aborted(0xF3); break;
|
||||
case 0xF4: BX_ERROR(("read cmd 0xF4 (SECURITY ERASE UNIT) not supported"));command_aborted(0xF4); break;
|
||||
case 0xF5: BX_ERROR(("read cmd 0xF5 (SECURITY FREEZE LOCK) not supported"));command_aborted(0xF5); break;
|
||||
case 0xF6: BX_ERROR(("read cmd 0xF6 (SECURITY DISABLE PASSWORD) not supported"));command_aborted(0xF6); break;
|
||||
case 0xF8: BX_ERROR(("read cmd 0xF8 (READ NATIVE MAX ADDRESS) not supported"));command_aborted(0xF8); break;
|
||||
case 0xF9: BX_ERROR(("read cmd 0xF9 (SET MAX ADDRESS) not supported"));command_aborted(0xF9); break;
|
||||
case 0x08: BX_ERROR(("read cmd 0x08 (DEVICE RESET) not supported")); command_aborted(0x08); break;
|
||||
case 0x10: BX_ERROR(("read cmd 0x10 (RECALIBRATE) not supported")); command_aborted(0x10); break;
|
||||
case 0x22: BX_ERROR(("read cmd 0x22 (READ LONG) not supported")); command_aborted(0x22); break;
|
||||
case 0x23: BX_ERROR(("read cmd 0x23 (READ LONG NO RETRY) not supported")); command_aborted(0x23); break;
|
||||
case 0x24: BX_ERROR(("read cmd 0x24 (READ SECTORS EXT) not supported")); command_aborted(0x24); break;
|
||||
case 0x25: BX_ERROR(("read cmd 0x25 (READ DMA EXT) not supported")); command_aborted(0x25); break;
|
||||
case 0x26: BX_ERROR(("read cmd 0x26 (READ DMA QUEUED EXT) not supported")); command_aborted(0x26); break;
|
||||
case 0x27: BX_ERROR(("read cmd 0x27 (READ NATIVE MAX ADDRESS EXT) not supported")); command_aborted(0x27); break;
|
||||
case 0x29: BX_ERROR(("read cmd 0x29 (READ MULTIPLE EXT) not supported")); command_aborted(0x29); break;
|
||||
case 0x2A: BX_ERROR(("read cmd 0x2A (READ STREAM DMA) not supported")); command_aborted(0x2A); break;
|
||||
case 0x2B: BX_ERROR(("read cmd 0x2B (READ STREAM PIO) not supported")); command_aborted(0x2B); break;
|
||||
case 0x2F: BX_ERROR(("read cmd 0x2F (READ LOG EXT) not supported")); command_aborted(0x2F); break;
|
||||
case 0x30: BX_ERROR(("read cmd 0x30 (WRITE SECTORS) not supported")); command_aborted(0x30); break;
|
||||
case 0x31: BX_ERROR(("read cmd 0x31 (WRITE SECTORS NO RETRY) not supported")); command_aborted(0x31); break;
|
||||
case 0x32: BX_ERROR(("read cmd 0x32 (WRITE LONG) not supported")); command_aborted(0x32); break;
|
||||
case 0x33: BX_ERROR(("read cmd 0x33 (WRITE LONG NO RETRY) not supported")); command_aborted(0x33); break;
|
||||
case 0x34: BX_ERROR(("read cmd 0x34 (WRITE SECTORS EXT) not supported")); command_aborted(0x34); break;
|
||||
case 0x35: BX_ERROR(("read cmd 0x35 (WRITE DMA EXT) not supported")); command_aborted(0x35); break;
|
||||
case 0x36: BX_ERROR(("read cmd 0x36 (WRITE DMA QUEUED EXT) not supported")); command_aborted(0x36); break;
|
||||
case 0x37: BX_ERROR(("read cmd 0x37 (SET MAX ADDRESS EXT) not supported")); command_aborted(0x37); break;
|
||||
case 0x38: BX_ERROR(("read cmd 0x38 (CFA WRITE SECTORS W/OUT ERASE) not supported")); command_aborted(0x38); break;
|
||||
case 0x39: BX_ERROR(("read cmd 0x39 (WRITE MULTIPLE EXT) not supported")); command_aborted(0x39); break;
|
||||
case 0x3A: BX_ERROR(("read cmd 0x3A (WRITE STREAM DMA) not supported")); command_aborted(0x3A); break;
|
||||
case 0x3B: BX_ERROR(("read cmd 0x3B (WRITE STREAM PIO) not supported")); command_aborted(0x3B); break;
|
||||
case 0x3F: BX_ERROR(("read cmd 0x3F (WRITE LOG EXT) not supported")); command_aborted(0x3F); break;
|
||||
case 0x40: BX_ERROR(("read cmd 0x40 (READ VERIFY SECTORS) not supported")); command_aborted(0x40); break;
|
||||
case 0x41: BX_ERROR(("read cmd 0x41 (READ VERIFY SECTORS NO RETRY) not supported")); command_aborted(0x41); break;
|
||||
case 0x42: BX_ERROR(("read cmd 0x42 (READ VERIFY SECTORS EXT) not supported")); command_aborted(0x42); break;
|
||||
case 0x50: BX_ERROR(("read cmd 0x50 (FORMAT TRACK) not supported")); command_aborted(0x50); break;
|
||||
case 0x51: BX_ERROR(("read cmd 0x51 (CONFIGURE STREAM) not supported")); command_aborted(0x51); break;
|
||||
case 0x70: BX_ERROR(("read cmd 0x70 (SEEK) not supported")); command_aborted(0x70); break;
|
||||
case 0x87: BX_ERROR(("read cmd 0x87 (CFA TRANSLATE SECTOR) not supported")); command_aborted(0x87); break;
|
||||
case 0x90: BX_ERROR(("read cmd 0x90 (EXECUTE DEVICE DIAGNOSTIC) not supported")); command_aborted(0x90); break;
|
||||
case 0x91: BX_ERROR(("read cmd 0x91 (INITIALIZE DEVICE PARAMETERS) not supported")); command_aborted(0x91); break;
|
||||
case 0x92: BX_ERROR(("read cmd 0x92 (DOWNLOAD MICROCODE) not supported")); command_aborted(0x92); break;
|
||||
case 0x94: BX_ERROR(("read cmd 0x94 (STANDBY IMMEDIATE) not supported")); command_aborted(0x94); break;
|
||||
case 0x95: BX_ERROR(("read cmd 0x95 (IDLE IMMEDIATE) not supported")); command_aborted(0x95); break;
|
||||
case 0x96: BX_ERROR(("read cmd 0x96 (STANDBY) not supported")); command_aborted(0x96); break;
|
||||
case 0x97: BX_ERROR(("read cmd 0x97 (IDLE) not supported")); command_aborted(0x97); break;
|
||||
case 0x98: BX_ERROR(("read cmd 0x98 (CHECK POWER MODE) not supported")); command_aborted(0x98); break;
|
||||
case 0x99: BX_ERROR(("read cmd 0x99 (SLEEP) not supported")); command_aborted(0x99); break;
|
||||
case 0xA2: BX_ERROR(("read cmd 0xA2 (SERVICE) not supported")); command_aborted(0xA2); break;
|
||||
case 0xB0: BX_ERROR(("read cmd 0xB0 (SMART DISABLE OPERATIONS) not supported")); command_aborted(0xB0); break;
|
||||
case 0xB1: BX_ERROR(("read cmd 0xB1 (DEVICE CONFIGURATION FREEZE LOCK) not supported")); command_aborted(0xB1); break;
|
||||
case 0xC0: BX_ERROR(("read cmd 0xC0 (CFA ERASE SECTORS) not supported")); command_aborted(0xC0); break;
|
||||
case 0xC4: BX_ERROR(("read cmd 0xC4 (READ MULTIPLE) not supported")); command_aborted(0xC4); break;
|
||||
case 0xC5: BX_ERROR(("read cmd 0xC5 (WRITE MULTIPLE) not supported")); command_aborted(0xC5); break;
|
||||
case 0xC6: BX_ERROR(("read cmd 0xC6 (SET MULTIPLE MODE) not supported")); command_aborted(0xC6); break;
|
||||
case 0xC7: BX_ERROR(("read cmd 0xC7 (READ DMA QUEUED) not supported")); command_aborted(0xC7); break;
|
||||
case 0xC8: BX_ERROR(("read cmd 0xC8 (READ DMA) not supported")); command_aborted(0xC8); break;
|
||||
case 0xC9: BX_ERROR(("read cmd 0xC9 (READ DMA NO RETRY) not supported")); command_aborted(0xC9); break;
|
||||
case 0xCA: BX_ERROR(("read cmd 0xCA (WRITE DMA) not supported")); command_aborted(0xCA); break;
|
||||
case 0xCC: BX_ERROR(("read cmd 0xCC (WRITE DMA QUEUED) not supported")); command_aborted(0xCC); break;
|
||||
case 0xCD: BX_ERROR(("read cmd 0xCD (CFA WRITE MULTIPLE W/OUT ERASE) not supported")); command_aborted(0xCD); break;
|
||||
case 0xD1: BX_ERROR(("read cmd 0xD1 (CHECK MEDIA CARD TYPE) not supported")); command_aborted(0xD1); break;
|
||||
case 0xDA: BX_ERROR(("read cmd 0xDA (GET MEDIA STATUS) not supported")); command_aborted(0xDA); break;
|
||||
case 0xDE: BX_ERROR(("read cmd 0xDE (MEDIA LOCK) not supported")); command_aborted(0xDE); break;
|
||||
case 0xDF: BX_ERROR(("read cmd 0xDF (MEDIA UNLOCK) not supported")); command_aborted(0xDF); break;
|
||||
case 0xE0: BX_ERROR(("read cmd 0xE0 (STANDBY IMMEDIATE) not supported")); command_aborted(0xE0); break;
|
||||
case 0xE1: BX_ERROR(("read cmd 0xE1 (IDLE IMMEDIATE) not supported")); command_aborted(0xE1); break;
|
||||
case 0xE2: BX_ERROR(("read cmd 0xE2 (STANDBY) not supported")); command_aborted(0xE2); break;
|
||||
case 0xE3: BX_ERROR(("read cmd 0xE3 (IDLE) not supported")); command_aborted(0xE3); break;
|
||||
case 0xE4: BX_ERROR(("read cmd 0xE4 (READ BUFFER) not supported")); command_aborted(0xE4); break;
|
||||
case 0xE5: BX_ERROR(("read cmd 0xE5 (CHECK POWER MODE) not supported")); command_aborted(0xE5); break;
|
||||
case 0xE6: BX_ERROR(("read cmd 0xE6 (SLEEP) not supported")); command_aborted(0xE6); break;
|
||||
case 0xE7: BX_ERROR(("read cmd 0xE7 (FLUSH CACHE) not supported")); command_aborted(0xE7); break;
|
||||
case 0xE8: BX_ERROR(("read cmd 0xE8 (WRITE BUFFER) not supported")); command_aborted(0xE8); break;
|
||||
case 0xEA: BX_ERROR(("read cmd 0xEA (FLUSH CACHE EXT) not supported")); command_aborted(0xEA); break;
|
||||
case 0xED: BX_ERROR(("read cmd 0xED (MEDIA EJECT) not supported")); command_aborted(0xED); break;
|
||||
case 0xEF: BX_ERROR(("read cmd 0xEF (SET FEATURES) not supported")); command_aborted(0xEF); break;
|
||||
case 0xF1: BX_ERROR(("read cmd 0xF1 (SECURITY SET PASSWORD) not supported")); command_aborted(0xF1); break;
|
||||
case 0xF2: BX_ERROR(("read cmd 0xF2 (SECURITY UNLOCK) not supported")); command_aborted(0xF2); break;
|
||||
case 0xF3: BX_ERROR(("read cmd 0xF3 (SECURITY ERASE PREPARE) not supported")); command_aborted(0xF3); break;
|
||||
case 0xF4: BX_ERROR(("read cmd 0xF4 (SECURITY ERASE UNIT) not supported")); command_aborted(0xF4); break;
|
||||
case 0xF5: BX_ERROR(("read cmd 0xF5 (SECURITY FREEZE LOCK) not supported")); command_aborted(0xF5); break;
|
||||
case 0xF6: BX_ERROR(("read cmd 0xF6 (SECURITY DISABLE PASSWORD) not supported")); command_aborted(0xF6); break;
|
||||
case 0xF8: BX_ERROR(("read cmd 0xF8 (READ NATIVE MAX ADDRESS) not supported")); command_aborted(0xF8); break;
|
||||
case 0xF9: BX_ERROR(("read cmd 0xF9 (SET MAX ADDRESS) not supported")); command_aborted(0xF9); break;
|
||||
|
||||
default:
|
||||
BX_PANIC(("IO read(1f0h): current command is %02xh",
|
||||
@ -1694,11 +1710,6 @@ BX_DEBUG(("IO write to %04x = %02x", (unsigned) address, (unsigned) value));
|
||||
}
|
||||
break;
|
||||
|
||||
case 0xe1: // IDLE IMMEDIATE
|
||||
BX_INFO (("IO write(1f7h): idle immediate ignored"));
|
||||
command_aborted(value);
|
||||
break;
|
||||
|
||||
// power management
|
||||
case 0xe5: // CHECK POWER MODE
|
||||
BX_SELECTED_CONTROLLER.status.busy = 0;
|
||||
@ -1709,11 +1720,13 @@ BX_DEBUG(("IO write to %04x = %02x", (unsigned) address, (unsigned) value));
|
||||
BX_SELECTED_CONTROLLER.sector_count = 0xff; // Active or Idle mode
|
||||
raise_interrupt();
|
||||
break;
|
||||
|
||||
|
||||
// List all the write operations that are defined in the ATA/ATAPI spec
|
||||
// that we don't support. Commands that are listed here will cause a
|
||||
// BX_ERROR, which is non-fatal, and the command will be aborted.
|
||||
case 0x24: BX_ERROR(("write cmd 0x24 (READ SECTOR(S) EXT) not supported"));command_aborted(0x24); break;
|
||||
case 0x22: BX_ERROR(("write cmd 0x22 (READ LONG) not supported")); command_aborted(0x22); break;
|
||||
case 0x23: BX_ERROR(("write cmd 0x23 (READ LONG NO RETRY) not supported")); command_aborted(0x23); break;
|
||||
case 0x24: BX_ERROR(("write cmd 0x24 (READ SECTORS EXT) not supported"));command_aborted(0x24); break;
|
||||
case 0x25: BX_ERROR(("write cmd 0x25 (READ DMA EXT) not supported"));command_aborted(0x25); break;
|
||||
case 0x26: BX_ERROR(("write cmd 0x26 (READ DMA QUEUED EXT) not supported"));command_aborted(0x26); break;
|
||||
case 0x27: BX_ERROR(("write cmd 0x27 (READ NATIVE MAX ADDRESS EXT) not supported"));command_aborted(0x27); break;
|
||||
@ -1721,7 +1734,10 @@ BX_DEBUG(("IO write to %04x = %02x", (unsigned) address, (unsigned) value));
|
||||
case 0x2A: BX_ERROR(("write cmd 0x2A (READ STREAM DMA) not supported"));command_aborted(0x2A); break;
|
||||
case 0x2B: BX_ERROR(("write cmd 0x2B (READ STREAM PIO) not supported"));command_aborted(0x2B); break;
|
||||
case 0x2F: BX_ERROR(("write cmd 0x2F (READ LOG EXT) not supported"));command_aborted(0x2F); break;
|
||||
case 0x34: BX_ERROR(("write cmd 0x34 (WRITE SECTOR(S) EXT) not supported"));command_aborted(0x34); break;
|
||||
case 0x31: BX_ERROR(("write cmd 0x31 (WRITE SECTORS NO RETRY) not supported")); command_aborted(0x31); break;
|
||||
case 0x32: BX_ERROR(("write cmd 0x32 (WRITE LONG) not supported")); command_aborted(0x32); break;
|
||||
case 0x33: BX_ERROR(("write cmd 0x33 (WRITE LONG NO RETRY) not supported")); command_aborted(0x33); break;
|
||||
case 0x34: BX_ERROR(("write cmd 0x34 (WRITE SECTORS EXT) not supported"));command_aborted(0x34); break;
|
||||
case 0x35: BX_ERROR(("write cmd 0x35 (WRITE DMA EXT) not supported"));command_aborted(0x35); break;
|
||||
case 0x36: BX_ERROR(("write cmd 0x36 (WRITE DMA QUEUED EXT) not supported"));command_aborted(0x36); break;
|
||||
case 0x37: BX_ERROR(("write cmd 0x37 (SET MAX ADDRESS EXT) not supported"));command_aborted(0x37); break;
|
||||
@ -1730,11 +1746,19 @@ BX_DEBUG(("IO write to %04x = %02x", (unsigned) address, (unsigned) value));
|
||||
case 0x3A: BX_ERROR(("write cmd 0x3A (WRITE STREAM DMA) not supported"));command_aborted(0x3A); break;
|
||||
case 0x3B: BX_ERROR(("write cmd 0x3B (WRITE STREAM PIO) not supported"));command_aborted(0x3B); break;
|
||||
case 0x3F: BX_ERROR(("write cmd 0x3F (WRITE LOG EXT) not supported"));command_aborted(0x3F); break;
|
||||
case 0x42: BX_ERROR(("write cmd 0x42 (READ VERIFY SECTOR(S) EXT) not supported"));command_aborted(0x42); break;
|
||||
case 0x41: BX_ERROR(("write cmd 0x41 (READ VERIFY SECTORS NO RETRY) not supported")); command_aborted(0x41); break;
|
||||
case 0x42: BX_ERROR(("write cmd 0x42 (READ VERIFY SECTORS EXT) not supported"));command_aborted(0x42); break;
|
||||
case 0x50: BX_ERROR(("write cmd 0x50 (FORMAT TRACK) not supported")); command_aborted(0x50); break;
|
||||
case 0x51: BX_ERROR(("write cmd 0x51 (CONFIGURE STREAM) not supported"));command_aborted(0x51); break;
|
||||
case 0x70: BX_ERROR(("write cmd 0x70 (SEEK) not supported"));command_aborted(0x70); break;
|
||||
case 0x87: BX_ERROR(("write cmd 0x87 (CFA TRANSLATE SECTOR) not supported"));command_aborted(0x87); break;
|
||||
case 0x92: BX_ERROR(("write cmd 0x92 (DOWNLOAD MICROCODE) not supported"));command_aborted(0x92); break;
|
||||
case 0x94: BX_ERROR(("write cmd 0x94 (STANDBY IMMEDIATE) not supported")); command_aborted(0x94); break;
|
||||
case 0x95: BX_ERROR(("write cmd 0x95 (IDLE IMMEDIATE) not supported")); command_aborted(0x95); break;
|
||||
case 0x96: BX_ERROR(("write cmd 0x96 (STANDBY) not supported")); command_aborted(0x96); break;
|
||||
case 0x97: BX_ERROR(("write cmd 0x97 (IDLE) not supported")); command_aborted(0x97); break;
|
||||
case 0x98: BX_ERROR(("write cmd 0x98 (CHECK POWER MODE) not supported")); command_aborted(0x98); break;
|
||||
case 0x99: BX_ERROR(("write cmd 0x99 (SLEEP) not supported")); command_aborted(0x99); break;
|
||||
case 0xB0: BX_ERROR(("write cmd 0xB0 (SMART commands) not supported"));command_aborted(0xB0); break;
|
||||
case 0xB1: BX_ERROR(("write cmd 0xB1 (DEVICE CONFIGURATION commands) not supported"));command_aborted(0xB1); break;
|
||||
case 0xC0: BX_ERROR(("write cmd 0xC0 (CFA ERASE SECTORS) not supported"));command_aborted(0xC0); break;
|
||||
@ -1742,6 +1766,7 @@ BX_DEBUG(("IO write to %04x = %02x", (unsigned) address, (unsigned) value));
|
||||
case 0xC5: BX_ERROR(("write cmd 0xC5 (WRITE MULTIPLE) not supported"));command_aborted(0xC5); break;
|
||||
case 0xC7: BX_ERROR(("write cmd 0xC7 (READ DMA QUEUED) not supported"));command_aborted(0xC7); break;
|
||||
case 0xC8: BX_ERROR(("write cmd 0xC8 (READ DMA) not supported"));command_aborted(0xC8); break;
|
||||
case 0xC9: BX_ERROR(("write cmd 0xC9 (READ DMA NO RETRY) not supported")); command_aborted(0xC9); break;
|
||||
case 0xCA: BX_ERROR(("write cmd 0xCA (WRITE DMA) not supported"));command_aborted(0xCA); break;
|
||||
case 0xCC: BX_ERROR(("write cmd 0xCC (WRITE DMA QUEUED) not supported"));command_aborted(0xCC); break;
|
||||
case 0xCD: BX_ERROR(("write cmd 0xCD (CFA WRITE MULTIPLE W/OUT ERASE) not supported"));command_aborted(0xCD); break;
|
||||
@ -1750,6 +1775,7 @@ BX_DEBUG(("IO write to %04x = %02x", (unsigned) address, (unsigned) value));
|
||||
case 0xDE: BX_ERROR(("write cmd 0xDE (MEDIA LOCK) not supported"));command_aborted(0xDE); break;
|
||||
case 0xDF: BX_ERROR(("write cmd 0xDF (MEDIA UNLOCK) not supported"));command_aborted(0xDF); break;
|
||||
case 0xE0: BX_ERROR(("write cmd 0xE0 (STANDBY IMMEDIATE) not supported"));command_aborted(0xE0); break;
|
||||
case 0xE1: BX_ERROR(("write cmd 0xE1 (IDLE IMMEDIATE) not supported"));command_aborted(0xE1); break;
|
||||
case 0xE2: BX_ERROR(("write cmd 0xE2 (STANDBY) not supported"));command_aborted(0xE2); break;
|
||||
case 0xE3: BX_ERROR(("write cmd 0xE3 (IDLE) not supported"));command_aborted(0xE3); break;
|
||||
case 0xE4: BX_ERROR(("write cmd 0xE4 (READ BUFFER) not supported"));command_aborted(0xE4); break;
|
||||
@ -1767,7 +1793,6 @@ BX_DEBUG(("IO write to %04x = %02x", (unsigned) address, (unsigned) value));
|
||||
case 0xF8: BX_ERROR(("write cmd 0xF8 (READ NATIVE MAX ADDRESS) not supported"));command_aborted(0xF8); break;
|
||||
case 0xF9: BX_ERROR(("write cmd 0xF9 (SET MAX ADDRESS) not supported"));command_aborted(0xF9); break;
|
||||
|
||||
|
||||
default:
|
||||
BX_PANIC(("IO write(1f7h): command 0x%02x", (unsigned) value));
|
||||
// if user foolishly decides to continue, abort the command
|
||||
|
||||
Loading…
Reference in New Issue
Block a user