No major changes to the kernel: just compiled in arch_smp.cpp and fixed the
IDT load in arch_cpu_init_percpu to use the correct limit for x86_64 (uses
sizeof(interrupt_descriptor)). In the boot loader, changed smp_boot_other_cpus
to construct a temporary GDT and get the page directory address from CR3, as
what's in kernel_args will be 64-bit stuff and will not work to switch the
CPUs into 32-bit mode in the trampoline code. Refactored 64-bit kernel entry
code to not use the stack after disabling paging, as the secondary CPUs are
given a 32-bit virtual stack address by the SMP trampoline code which will
no longer work.
A proper page fault handler was required for areas that were not locked
into the kernel address space. This enables the boot process to get
up to the point of trying to find the boot volume.
* Thread creation and switching is working fine, however threads do not yet
get interrupted because I've not implemented hardware interrupt handling
yet (I'll do that next).
* I've made some changes to struct iframe: I've removed the e/r prefixes
from the member names for both 32/64, so now they're just named ip, ax,
bp, etc. This makes it easier to write code that works with both 32/64
without having to deal with different iframe member names.
This has been done by adding typedefs in elf_common.h to the correct ELF
structures for the architecture, and changing all Elf32_* uses to those
types. I don't know whether image loading works as I cannot test it yet,
there may be some 64-bit safety issues around. However, symbol lookup for
the kernel is working correctly.
* Uses 64-bit multiplication, special handling for CPUs clocked < 1 GHz
in system_time_nsecs() not required like on x86.
* Tested against a straight conversion of the x86 version, noticably
faster with a large number of system_time() calls.
* Added empty source files for all the 64-bit paging method code, and a
stub implementation of X86PagingMethod64Bit.
* arch_vm_translation_map.cpp has been modified to use X86PagingMethod64Bit
on x86_64.
* Some things are currently ifndef'd out completely for x86_64 because
they aren't implemented, there's a few other ifdef's to handle x86_64
differences but most of the code works unchanged.
* Renamed some i386_* functions to x86_*.
* Added a temporary method for setting the current thread on x86_64
(a global variable, not SMP safe). This will be changed to be done
via the GS segment but I've not implemented that yet.
For now I've just put all the stub functions that are needed to link the
kernel into a file called stubs.cpp. I've not yet moved across the interrupt
handling code or the ELF64 relocation code to the x86 directory. Once those
have been moved I can get rid of the x86_64 headers/source directories.
Not many changes seeing as there's not much x86_64 stuff done yet. Small
differences are handled with ifdefs, large differences (descriptors.h,
struct iframe) have separate headers under arch/x86/32 and arch/x86/64.
The setup procedure is fairly simple: create a 64-bit GDT and 64-bit page
tables that include all kernel mappings from the 32-bit address space, but at
the correct 64-bit address, then go through kernel_args and changes all virtual
addresses to 64-bit addresses, and finally switch to long mode and jump to the
kernel.
* platform_allocate_elf_region() is removed, it is implemented in platform-
independent code now (ELF*Class::AllocateRegion). For ELF64 it is now
assumed that 64-bit addresses are mapped in the loader's 32-bit address space
as (address - KERNEL_BASE_64BIT + KERNEL_BASE).
* mapped_delta field from preloaded_*_image removed, now handled compile-time
using the ELF*Class::Map method.
* Also link the kernel with -z max-page-size=0x1000, removes the need for
2MB alignment on the data segment (not going to map the kernel with large
pages for the time being).
* Added a FixedWidthPointer template class which uses 64-bit storage to hold
a pointer. This is used in place of raw pointers in kernel_args.
* Added __attribute__((packed)) to kernel_args and all structures contained
within it. This is necessary due to different alignment behaviour for
32-bit and 64-bit compilation with GCC.
* With these changes, kernel_args will now come out the same size for both
the x86_64 kernel and the loader, excluding the preloaded_image structure
which has not yet been changed.
* Tested both an x86 GCC2 and GCC4 build, no problems caused by these changes.
The whole kernel now builds and there are no undefined references when
linking, I just need to fix some strange relocation errors I'm getting
(probably a problem with the linker script) and then I'll have a kernel
image.
* x86_64 is using the existing *_ia32 boot platforms.
* Special flags are required when compiling the loader to get GCC to compile
32-bit code. This adds a new set of rules for compiling boot code rather
than using the kernel rules, which compile using the necessary flags.
* Some x86_64 private headers have been stubbed by #include'ing the x86
versions. These will be replaced later.
* gPeripheralBase keeps track of the device
peripherals before and after mmu_init
* Add ability to disable mmu for troubleshooting
* Remove static FB_BASE, we actually don't know
where the FB is yet. (depends on firmware used)
* BCM2708 defines no longer assume 0x20 address
We will be throwing away the blob memory mapping
and using our own.
* Use existing blob mapping to turn GPIO led on pre mmu_init
* Remap MMU hardware addresses from 0x7E. We could map each device,
however the kernel will throw away the mappings again anyway. For
now we just map the whole range and use offsets.
* Serial uart no longer works, however at least
we know why now :). Serial driver now needs to
use mapped address.
* Use U-Boot mmu code as base
* This will be factored out someday into common arch mmu
code when we can read Flattened Device Trees
* Move mmu_init after serial_init.
Temporary change as we will want serial_init to use
memory mapped addresses... for debugging.
* introduce a DebugUART baseclass,
* rework 8250 and PL011 implementations from kallisti5 to inherit DebutUART,
* each arch should override the IO methods to access registers.
* on ARM registers are 32bit-aligned.
* U-Boot still works for the verdex target.
* rPi still compiles, needs testing.
* Still some more consolidation needed to allow runtime choice of the UART type (as read from FDT blobs for ex.).
* serial.cpp should probably mostly be made generic as well.
* didn't touch x86 or ppc yet.
* Enable/Disable makes more sense and matches
platform loader serial functions.
* Rework PL011 code after finding a PDF covering
the details of it.
* Rename UART global defines in loader to be more
exact about location
* This makes things a little more flexible and
the interface to use the uarts cleaner.
* May want to make a generic Uart wrapper
class in uart.h / uart.cpp and call drivers
as needed from there.
* Avoid name collisions
* This uart stuff may work better as a class at
some point, however I didn't want to rock the
u-boot boat *too* much as I don't have the
hardware to test.
* Add nested function wrappers to allow usage of other
uart drivers depending on board. We may want to use this
on other platforms at some point (haha, maybe)
* Make Kernel ARM UART slightly more generic
through (BOARD_UART_CLOCK) configured per board
* Add initial Raspberry Pi serial code
* Still rough and non-working
AMD C1E is a BIOS controlled C3 state. Certain processors families
may cut off TSC and the lapic timer when it is in a deep C state,
including C1E state, thus the cpu can't be waken up and system will hang.
This patch firstly adds the support of idle selection during boot. Then
it implements amdc1e_noarat_idle() routine which checks the MSR which
contains the C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27) before
executing the halt instruction, then clear them once set.
However intel C1E doesn't has such problem. AMD C1E is a BIOS controlled
C3 state. The difference between C1E and C3 is that transition into C1E
is not initiated by the operating system. System will enter C1E state
automatically when both cores enters C1 state. As for intel C1E, it
means "reduce CPU voltage before entering corresponding Cx-state".
This patch may fix#8111, #3999, #7562, #7940 and #8060
Copied from the description of #3999:
>but for some reason I hit the power button instead of the reset one. And
>the boot continued!!
The reason is CPUs are waken up once power button is hit.
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* Prepend x86_ to non-static x86 code
* Add x86_init_fpu function to kernel header
* Don't init fpu multiple times on smp systems
* Verified fpu is still started on smp and non-smp
* SSE code still generates general protection faults
on smp systems though
* Rename init_sse to init_fpu and handle FPU setup.
* Stop trying to set up FPU before VM init.
We tried to set up the FPU before VM init, then
set it up again after VM init with SSE extensions,
this caused SSE and MMX applications to crash.
* Be more logical in FPU setup by detecting CPU flag prior
to enabling FPU. (it's unlikely Haiku will run on
a processor without a fpu... but lets be consistant)
* SSE2 gcc code now runs (faster even) without GPF
* tqh confirms his previously crashing mmx code now works
* The non-SSE FPU enable after VM init needs tested!
* The vm86 code or the code running in virtual 8086 mode may clobber the
%fs register that we use for the CPU dependent thread local storage
(TLS). Previously the vm86 code would simply restore %fs on exit, but
this doesn't always work. If the thread got unscheduled while running
in virtual 8086 mode and was then rescheduled on a different CPU, the
vm86 exit code would restore the %fs register with the TLS value of
the old CPU, causing anything using TLS in userland to crash later on.
Instead we skip the %fs register restore on exit (as do the other
interrupt return functions) and explicitly update the potentially
clobbered %fs by calling x86_set_tls_context(). This will repopulate
the %fs register with the TLS value for the right CPU. Fixes#8068.
* Made the static set_tls_context() into x86_set_tls_context() and made
it available to others to faciliate the above.
* Sync the vm86 specific interrupt code with the changes from hrev23370,
using the iframe pop macro to properly return. Previously what was
pushed in int_bottom wasn't poped on return.
* Account for the time update macro resetting the in_kernel flag and
reset it to 1, as we aren't actually returning to userland. This
didn't cause any harm though as only the time tracking is using that
flag so far.
* Some minor cleanup.
While structs looked cleaner at first sight, it didn't really was any simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43140 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If we detect ACPI 2.0 or higher, the spec says we should use the XSDT rather
than the RSDT. Attempt to do so, falling back to the RSDT if the former fails
to be mapped/validated.
* Refactored acpi_find_table into a templated version to account for the fact
that the XSDT exports different pointer widths for its links to other tables
than the RSDT.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42133 a95241bf-73f2-0310-859d-f6bbb57e9c96
which don't wait for a character, but return -1 when no character is
available ATM. Implemented correctly for x86 only.
* Changed the semantics of the debugger_module_info::debugger_getchar() hook.
It is supposed to return immediately now.
* Adjusted usb_keyboard accordingly. Hacked UHCI's debug_process_transfer() to
achieve that. It does now start, check, or cancel a transfer. Split
UHCI::ProcessDebugTransfer() into StartDebugTransfer(), and
CheckDebugTransfer() accordingly, and also added a CancelDebugTransfer().
The latter seems to have issues. Michael, please have a look. I have no clue
what I'm doing. :-)
* Adjusted kgetc() to poll all possible inputs using the new
functions/semantics. This allows to use any input (USB, PS/2, serial) in KDL.
* Removed the no longer needed "serial_input" command.
* read_line(): Also support 0x7f as backspace code. That's what xterm sends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42126 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reorganized the kernel locking related to threads and teams.
* We now discriminate correctly between process and thread signals. Signal
handlers have been moved to teams. Fixes#5679.
* Implemented real-time signal support, including signal queuing, SA_SIGINFO
support, sigqueue(), sigwaitinfo(), sigtimedwait(), waitid(), and the addition
of the real-time signal range. Closes#1935 and #2695.
* Gave SIGBUS a separate signal number. Fixes#6704.
* Implemented <time.h> clock and timer support, and fixed/completed alarm() and
[set]itimer(). Closes#5682.
* Implemented support for thread cancellation. Closes#5686.
* Moved send_signal() from <signal.h> to <OS.h>. Fixes#7554.
* Lots over smaller more or less related changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42116 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added an arch_debug_gdb_get_registers() interface that is supposed to provide
the register values in the format expected by gdb and implemented it for x86.
* Reimplemented gdb_regreply() to use that. Also made it buffer overflow safe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41880 a95241bf-73f2-0310-859d-f6bbb57e9c96
at the override entry to trigger the overriden vector so that we don't need
to configure any additional redirections.
* Also configures the polarity and trigger modes found in the override entry.
* When disabling the legacy PIC, retrieve the enabled interrupts and re-enable
then in the IO-APIC. This will for example make the ACPI SCI work that is
installed prior to switching interrupt models. Through the transparent support
for interrupt source overrides it'll also automatically relay from the old to
the new vector.
This should make ACPI interrupts work and should support relocating the ISA PIT
from irq 0 to a different global system interrupt (usually 2) so that it can
still work when IO-APICs are in use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41528 a95241bf-73f2-0310-859d-f6bbb57e9c96
at all and, since there can be multiple IO-APICs, we need to do the
enumeration again in the kernel anyway. Also only set ioapic_phys the first
time we encounter an IO-APIC object as it looks cleaner when we arrive at the
first IO-APIC default address.
* Therefore we don't have to worry about already mapped IO-APICs when
enumerating them in the kernel.
* Also remove the mapping function that is now not used anymore.
* We still use the ioapic_phys field of the kernel args to determine whether
there is an IO-APIC at all to avoid needlessly doing the enumeration again.
This fixes multi IO-APIC configurations, because before we would indeed map
the last IO-APIC listed in the MADT, but then in the kernel assumed we mapped
the first one. We'd end up with mapping the last listed IO-APIC twice and the
first IO-APIC never, always programming the last one when we actually targetted
the first one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41476 a95241bf-73f2-0310-859d-f6bbb57e9c96
mark the ISA interrupts as unusable and then use ioapic_is_interrupt_available
to determine if that vector is possibly taken by an IO-APIC. If IO-APICs are
not used, this will simply always return false, leaving all vectors free for
MSI use.
* The msi_init() now has to be done after a potential IO-APIC init, so it is now
done after ioapic_init() instead of inside apic_init().
* Add apic_disable_local_ints() to clear the local ints on the local APIC once
we are in APIC mode (i.e. the IO-APIC is set up and we don't need the external
routing anymore).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41445 a95241bf-73f2-0310-859d-f6bbb57e9c96
functional change intended.
* Use an appropriately sized sLevelTriggeredInterrupts for each controller type.
This also fixes an out of bound access for IO-APICs with more than 32 entries
and also returns the right mode in such cases.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41426 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The team and thread kernel structures have been renamed to Team and Thread
respectively and moved into the new BKernel namespace.
* Several (kernel add-on) sources have been converted from C to C++ since
private kernel headers are included that are no longer C compatible.
Changes after merging:
* Fixed gcc 2 build (warnings mainly in the scary firewire bus manager).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40196 a95241bf-73f2-0310-859d-f6bbb57e9c96
- This is mostly a copy of the x86 32bit paging method and infrastructure, this was copied for two reasons:
1) It is the most complete VM arch
2) The first ARM PAE patches have landed on alkml, so we will have to deal with it in the future as well,
and this infrastructure has proven to be ready ;)
- No protection features, or dirty/accessed tracking yet
- Lots of #if 0
but....
It boots all the way up to init_modules() now, and then dies because of a lack of (ARM) ELF relocation implementation!
Since at this point the VM can be fully initialised, I'm going to focus on CPU exceptions next, so we can get KDL to trigger
when it happens, and I can actually debug from there ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39206 a95241bf-73f2-0310-859d-f6bbb57e9c96
Suggested by Ingo in ticket #6139. Code is adapted from x86.
Note that on ppc64 GPR1 needs to be 64-bit, thus the choice of addr_t.
Resolves part of ticket #6160.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37281 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers and respectively added includes in source files.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37259 a95241bf-73f2-0310-859d-f6bbb57e9c96
Kernel doesn't use it, and it could be regenerated in the kernel if it did need it.
This also unlocks the apic range the bios can use. Previously the apic ids would have
to fit within 0..MAX_CPUS or it'd reject the cpu. Some boxes (mine in particular)
seem to sparsely populate the apic id so that the range is pretty large.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37108 a95241bf-73f2-0310-859d-f6bbb57e9c96
was used.
* Renamed X86VMTranslationMap to X86VMTranslationMap32Bit and pulled the paging
method agnostic part into new base class X86VMTranslationMap.
* Moved X86PagingStructures into its own header/source pair.
* Moved pgdir_virt from X86PagingStructures to X86PagingStructures32Bit where
it is actually used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37055 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed i386_context_switch() to x86_context_switch().
* x86_context_switch() no longer sets the page directory.
arch_thread_context_switch() does that explicitly, now. This allows to solve
the TODO by reordering releasing the previous paging structures reference and
setting the new page directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37024 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed vm_translation_map_arch_info to X86PagingStructures, and all
members and local variables of that type accordingly.
* arch_thread_context_switch(): Added TODO: The still active paging structures
can indeed be deleted before we stop using them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37022 a95241bf-73f2-0310-859d-f6bbb57e9c96
where appropriate.
* Typedef'ed page_num_t to phys_addr_t and used it in more places in
vm_page.{h,cpp}.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36937 a95241bf-73f2-0310-859d-f6bbb57e9c96
can safely be used.
* Since using the I/O APIC is disabled by default, I've removed the "return"
that prevented its use when enabled. Let's see if it already does anything.
* Adapted other arch_int.cpp with a bit of cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36290 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupts (MSI).
* Add the remaining IDT entries and redirection functions in the interrupt code.
* Make the PIC end_of_interrupt() return a result to indicate whether the vector
was handled by this PIC. If it isn't we now issue a apic_end_of_interrupt()
in the assumption of apic local interrupt, MSI or IPI. This also removes
the need for the gUsingIOAPIC global and doing manual apic_end_of_interrupt()
calls in the SMP and timer code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36221 a95241bf-73f2-0310-859d-f6bbb57e9c96
other places where previously the same functionality was duplicated. Also
seperated the header which was originally arch_smp.h into apic.h and arch_smp.h
again as some of it is MP and not actually APIC.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36182 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added fields for temporary storage of the debug registers dr6 and dr7 to the
arch_cpu_info structure. The actual registers are stored at the beginning of
x86_exit_user_debug_at_kernel_entry() and read in
x86_handle_debug_exception().
The problem was that x86_exit_user_debug_at_kernel_entry() itself overwrote
dr7 and, if kernel breakpoints were enabled, dr6 could be overwritten anytime
after. So x86_handle_debug_exception() would find incorrect values in the
registers (definitely in dr7) and thus interpret the detected debug condition
incorrectly. Usually watchpoints were recognized as breakpoints.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35951 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_debug_registers instead.
* Call arch_debug_save_registers() on all CPUs when entering the kernel
debugger.
* Added debug_get_debug_registers() to return a specified CPU's saved
registers.
* x86:
- Replaced the previous arch_debug_save_registers() implementation. Disabled
getting the registers via the gdb interface for the time being.
- Fixed the "sc", "call", and "calling" commands to also work for threads
running on another CPU.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35907 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the page table allocation more flexible. Got rid of sMaxVirtualAddress
and added new virtual_end address to the architecture specific kernel args.
* Increased the virtual space we reserve for the kernel to 16 MB. That
should suffice for quite a while. The previous 2 MB were too tight when
building the kernel with debug info.
* mmu_init(): The way we were translating the BIOS' extended memory map to
our physical ranges arrays was broken. Small gaps between usable memory
ranges would be ignored and instead marked allocated. This worked fine for
the boot loader and during the early kernel initialization, but after the
VM has been fully set up it frees all physical ranges that have not been
claimed otherwise. So those ranges could be entered into the free pages
list and would be used later. This could possibly cause all kinds of weird
problems, probably including ACPI issues. Now we add only the actually
usable ranges to our list.
Kernel:
* vm_page_init(): The pages of the ranges between the usable physical memory
ranges are now marked PAGE_STATE_UNUSED, the allocated ranges
PAGE_STATE_WIRED.
* unmap_and_free_physical_pages(): Don't free pages marked as unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35726 a95241bf-73f2-0310-859d-f6bbb57e9c96
needs to be or'ed to the address specification), "uncached" is assumed.
* Set the memory type for the "BIOS" and "DMA" areas to write-back. Not sure, if
that's correct, but that's what was effectively used on my machines before.
* Changed x86_set_mtrrs() and the CPU module hook to also set the default memory
type.
* Rewrote the MTRR computation once more:
- Now we know all used memory ranges, so we are free to extend used ranges
into unused ones in order to simplify them for MTRR setup.
- Leverage the subtractive properties of uncached and write-through ranges to
simplify ranges of any other respectively write-back type.
- Set the default memory type to write-back, so we don't need MTRRs for the
RAM ranges.
- If a new range intersects with an existing one, we no longer just fail.
Instead we use the strictest requirements implied by the ranges. This fixes
#5383.
Overall the new algorithm should be sufficient with far less MTRRs than before
(on my desktop machine 4 are used at maximum, while 8 didn't quite suffice
before). A drawback of the current implementation is that it doesn't deal with
the case of running out of MTRRs at all, which might result in some ranges
having weaker caching/memory ordering properties than requested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35515 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pulled the physical page mapping functions out of vm_translation_map into
a new interface VMPhysicalPageMapper.
* Renamed vm_translation_map to VMTranslationMap and made it a proper C++
class. The functions in the operations vector have become methods.
* Added class GenericVMPhysicalPageMapper implementing VMPhysicalPageMapper
as far as possible (without actually writing new code).
* Adjusted the x86 and the PPC specifics accordingly (untested for the
latter). For the other architectures the build is, I'm afraid, seriously
broken.
The next steps will modify and extend the VMTranslationMap interface, so that
it will be possible to fix the bugs in vm_unmap_page[s]() and employ
architecture specific optimizations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35066 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Replaced the "userOnly" parameter by a "flags" parameter, that allows to
specify kernel and userland stack traces individually.
- x86, m68k: Don't always skip the first frame as that prevents the caller
from being able to record its own address.
* capture_tracing_stack_trace(): Replaced the "userOnly" parameter by
"kernelOnly", since one is probably always interested in the kernel stack
trace, but might not want the userland stack trace.
* Added stack trace support for VM cache kernel tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34742 a95241bf-73f2-0310-859d-f6bbb57e9c96
system_time_nsecs(), returning the system time in nanoseconds. The function
is only really implemented for x86. For the other architectures
system_time() * 1000 is returned.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34543 a95241bf-73f2-0310-859d-f6bbb57e9c96
all MTRRs at once.
* Added a respective x86_set_mtrrs() kernel function.
* x86 CPU module:
- Implemented the new hook.
- Prefixed most debug output with the CPU index. Otherwise it gets quite
confusing with multiple CPUs.
- generic_init_mtrrs(): No longer clear all MTRRs, if they are already
enabled. This lets us benefit from the BIOS's setup until we install our
own -- otherwise with caching disabled things are *really* slow.
* arch_vm.cpp: Completely rewrote the MTRR handling as the old one was not
only slow (O(2^n)), but also broken (resulting in incorrect setups (e.g.
with cachable ranges larger than requested)), and not working by design for
certain cases (subtractive setups intersecting ranges added later).
Now we maintain an array with the successfully set ranges. When a new range
is added, we recompute the complete MTRR setup as we need to. The new
algorithm analyzing the ranges has linear complexity and also handles range
base addresses with an alignment not matching the range size (e.g. a range
at address 0x1000 with size 0x2000) and joining of adjacent/overlapping
ranges of the same type.
This fixes the slow graphics on my 4 GB machine (though unfortunately the
8 MTRRs aren't enough to fully cover the complete frame buffer (about 35
pixel lines remain uncachable), but that can't be helped without rounding up
the frame buffer size, for which we don't have enough information). It might
also fix#1823.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34197 a95241bf-73f2-0310-859d-f6bbb57e9c96
aren't routed correctly over the 8259, it seems.
- Removed passing the hpet_regs around, since there's a static variable.
- Added lots of debug dprintfs.
- Fixed setting the timer interrupt to edge
- Timer is initialized once.
- Use the timer 0 instead of 2.
- Renamed register definitions to be more readable
- Use 64 bits registers and unions where applicable.
- Other things I don't remember
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33345 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also shortened some defines using "TN" instead of "TIMER". It's also
the same scheme used in the specs
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33334 a95241bf-73f2-0310-859d-f6bbb57e9c96
Revert back start of kernel space to the usual place, no need to differ from other archs here.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32401 a95241bf-73f2-0310-859d-f6bbb57e9c96
Start of framebuffer initialization for the Verdex board.
For now it points to the data section as framebuffer for testing and shows an RGB pattern.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32352 a95241bf-73f2-0310-859d-f6bbb57e9c96
- moved board/ folder around again, it probably belongs only to kernel stuff,
- added board_config.h templates for gumstix boards.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32197 a95241bf-73f2-0310-859d-f6bbb57e9c96
ROUNDUP to use '*' and '/' -- the compiler will optimize that for powers of
two anyway and this implementation works for other numbers as well.
* The thread::fault_handler use in C[++] code was broken with gcc 4. At least
when other functions were invoked. Trying to trick the compiler wasn't a
particularly good idea anyway, since the next compiler version could break
the trick again. So the general policy is to use the fault handlers only in
assembly code where we have full control. Changed that for x86 (save for the
vm86 mode, which has a similar mechanism), but not for the other
architectures.
* Introduced fault_handler, fault_handler_stack_pointer, and fault_jump_buffer
fields in the cpu_ent structure, which must be used instead of
thread::fault_handler in the kernel debugger. Consequently user_memcpy() must
not be used in the kernel debugger either. Introduced a debug_memcpy()
instead.
* Introduced debug_call_with_fault_handler() function which calls a function
in a setjmp() and fault handler context. The architecture specific backend
arch_debug_call_with_fault_handler() has only been implemented for x86 yet.
* Introduced debug_is_kernel_memory_accessible() for use in the kernel
debugger. It determines whether a range of memory can be accessed in the
way specified. The architecture specific back end
arch_vm_translation_map_is_kernel_page_accessible() has only been implemented
for x86 yet.
* Added arch_debug_unset_current_thread() (only implemented for x86) to unset
the current thread pointer in the kernel debugger. When entering the kernel
debugger we do some basic sanity checks of the currently set thread structure
and unset it, if they fail. This allows certain commands (most importantly
the stack trace command) to avoid accessing the thread structure.
* x86: When handling a double fault, we do now install a special handler for
page faults. This allows us to gracefully catch faulting commands, even if
e.g. the thread structure is toast.
We are now in much better shape to deal with double faults. Hopefully avoiding
the triple faults that some people have been experiencing on their hardware
and ideally even allowing to use the kernel debugger normally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32073 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SMP:
- Added smp_send_broadcast_ici_interrupts_disabled(), which is basically
equivalent to smp_send_broadcast_ici(), but is only called with interrupts
disabled and gets the CPU index, so it doesn't have to use
smp_get_current_cpu() (which dereferences the current thread).
- Added cpu index parameter to smp_intercpu_int_handler().
* x86:
- arch_int.c -> arch_int.cpp
- Set up an IDT per CPU. We were using a single IDT for all CPUs, but that
can't work, since we need different tasks for the double fault interrupt
vector.
- Set the per CPU double fault task gates correctly.
- Renamed set_intr_gate() to set_interrupt_gate and set_system_gate() to
set_trap_gate() and documented them a bit.
- Renamed double_fault_exception() x86_double_fault_exception() and fixed
it not to use smp_get_current_cpu(). Instead we have the new
x86_double_fault_get_cpu() that deducts the CPU index from the used stack.
- Fixed the double_fault interrupt handler: It no longer calls int_bottom to
avoid accessing the current thread.
* debug.cpp:
- Introduced explicit debug_double_fault() to enter the kernel debugger from
a double fault handler.
- Avoid using smp_get_current_cpu().
- Don't use kprintf() before sDebuggerOnCPU is set. Otherwise
acquire_spinlock() is invoked by arch_debug_serial_puts().
Things look a bit better when the current thread pointer is broken -- we run
into kernel_debugger_loop() and successfully print the "Welcome to KDL"
message -- but we still dereference the thread pointer afterwards, so that we
don't get a usable kernel debugger yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added x86_double_fault_get_cpu(), a save way to get the CPU index when in
the double fault handler. smp_get_current_cpu() requires at least a somewhat
intact thread structure, so we rather want to avoid it when handling a double
fault. There are a lot more of those dependencies in the KDL entry code.
Working on it...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32028 a95241bf-73f2-0310-859d-f6bbb57e9c96
there are prefixed with the respective architecture name. Useful for remote
debugging a different architecture.
* <x86/arch_debugger.h>: Introduced a structure for the FPU state, so that it
isn't left to the debugger.
* Removed the _kern_get_thread_cpu_state() syscall. Was originally intended for
bdb compatiblity, but isn't really needed.
* Kernel x86 arch_get_debug_cpu_state(): The use of fnsave was broken, since
it reinits the FPU after saving the state. This resulted in weird results
when debugging functions using the FPU. We now use fxsave, if available.
Otherwise fnsave + frstor should be used -- not fully implemented yet.
Same for arch_set_debug_cpu_state().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31682 a95241bf-73f2-0310-859d-f6bbb57e9c96
is a syscall iframe.
* User debugger support: Don't to call BreakpointManager::PrepareToContinue(),
if the thread returns from a syscall. We don't want to skip breakpoints in
that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31223 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The bulk of the work -- i.e. juggling the software and hardware breakpoints,
watchpoints, and memory reads/writes -- is done in the new class
BreakpointManager.
* For the architectures a few capability macros have to be defined, one
pointing to the software breakpoint instruction opcode. Done for x86.
* Some more simplifications in the user debugger code, made possible by the
recently introduced debugger_changed_condition attribute.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31214 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Generalized address checks. The debugger can now also read the commpage.
* Added new syscall _kern_get_thread_cpu_state() to get the CPU state of a
not running thread. Introduced arch_get_thread_debug_cpu_state() for that
purpose, which is only implemented for x86 ATM (uses the new
i386_get_thread_user_iframe()).
* Don't allow a debugger to change a thread's "esp" anymore. That's the esp
register in the kernel. "user_esp" can still be changed.
* Generally set RF (resume flag) in eflags in interrupt handlers, not only
after a instruction breakpoint debug exception. This should prevent
breakpoints from being triggered more than once (e.g. when the breakpoint is
on an instruction that can cause a page fault). I still saw those with bdb
in VMware, but that might be a VMware bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31045 a95241bf-73f2-0310-859d-f6bbb57e9c96
gcc could apparently assume that the register assigned to the one in the
clobber list would keep its value (as can be observed when disassembling
add_debugger_command_etc()).
Using a dummy output register works around the problem and also avoids the
unnecessary initialization of the register.
Comments explaining the mystery welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30909 a95241bf-73f2-0310-859d-f6bbb57e9c96
allowing optional prepending of a string to the symbol names.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30750 a95241bf-73f2-0310-859d-f6bbb57e9c96
will return consistent values. This helps with debug measurements for the time
being. Obviously we'll have to think of something different when we support
speed-stepping on models with frequency-dependent TSCs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30287 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mostly at least). Also disables -Werror for the binutils, but those should
be fixed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29804 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is not necessary, since userland teams' page directories also
contain the kernel mappings, and avoids unnecessary TLB flushes. To make
that possible the vm_translation_map_arch_info objects are reference
counted now.
This optimization reduces the kernel time of the Haiku build on my
machine with SMP disabled a few percent, but interestingly the total
time decreases only marginally. Haven't tested with SMP yet, but for
full impact CPU affinity would be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28287 a95241bf-73f2-0310-859d-f6bbb57e9c96
added vm_memcpy_from_physical() and vm_memcpy_physical_page(), and
added respective functions to the vm_translation_map operations. The
architecture specific implementation can now decide how to implement
them most efficiently. Added generic implementations that can be used,
though.
* Changed vm_{get,put}_physical_page(). The former no longer accepts
flags (the only flag PHYSICAL_PAGE_DONT_WAIT wasn't needed anymore).
Instead it returns an implementation-specific handle that has to be
passed to the latter. Added vm_{get,put}_physical_page_current_cpu()
and *_debug() variants, that work only for the current CPU,
respectively when in the kernel debugger. Also adjusted the
vm_translation_map operations accordingly.
* Made consequent use of the physical memory operations in the source
tree.
* Also adjusted the m68k and ppc implementations with respect to the
vm_translation_map operation changes, but they are probably broken,
nevertheless.
* For x86 the generic physical page mapper isn't used anymore. It is
suboptimal in any case. For systems with small memory it is too much
overhead, since one can just map the complete physical memory (that's
not done yet, though). For systems with large memory it counteracts
the VM strategy to reuse the least recently used pages. Since those
pages will most likely not be mapped by the page mapper anymore, it
will keep remapping chunks. This was also the reason why building
Haiku in Haiku was significantly faster with only 256 MB RAM (since
that much could be kept mapped all the time).
Now we're using a different strategy: We have small pools of virtual
page slots per CPU that are used for the physical page operations
(memset_physical(), memcpy_*_physical()) with CPU-pinned thread.
Furthermore we have four slots per translation map, which are used to
map page tables.
These changes speed up the Haiku image build in Haiku significantly. On
my Core2 Duo 2.2 GHz 2 GB machine about 40% to 20 min 40 s (KDEBUG
disabled, block cache debug disabled). Still more than factor 3 slower
than FreeBSD and Linux, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28244 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove dead ppc code
- add support for probing hardware registers the way linux does (early, hook with VBR to trap faults)
- detect MFPs this way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28031 a95241bf-73f2-0310-859d-f6bbb57e9c96
* memset() is now available through the commpage.
* CPU modules can provide a model-optimized memset().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27952 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_vm_aspace_swap().
* The x86 implementation does now maintain a bit mask per
vm_translation_map_arch_info indicating on which CPUs the address
space is active. This allows flush_tmap() to avoid ICI for user
address spaces when the team isn't currently running on any other CPU.
In this context ICI is relatively expensive, particularly since we map
most pages via vm_map_page() and therefore invoke flush_tmap() pretty
much for every single page.
This optimization speeds up a "hello world" compilation about 20% on
my machine (KDEBUG turned off, freshly booted), but interestingly it
has virtually no effect on the "-j2" haiku build time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27912 a95241bf-73f2-0310-859d-f6bbb57e9c96
many iframes are supposed to be skipped before recording the stack
trace. Currently implemented for x86 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27529 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used now. Tested only with VMware so far.
* apm_shutdown() is now called with interrupts turned on.
* Renamed arch_cpu.c to arch_cpu.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27404 a95241bf-73f2-0310-859d-f6bbb57e9c96
referencing iframe registers. Their prefix is "$". E.g. "$eax" refers to
the eax register of the current iframe. The features cooperates with the
"in_context" command, i.e. "in_context 92 $eip = 0" will set the eip
register of thread 92 to 0 (thus sealing its fate ;-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27192 a95241bf-73f2-0310-859d-f6bbb57e9c96
PC of the innermost iframe.
* The "in_context" command does now set the currently debugged thread
respectively.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27166 a95241bf-73f2-0310-859d-f6bbb57e9c96
and size of the double fault stack.
* is_kernel_stack_address() does now also check whether the given
address is on the double fault stack. This fixes stack traces on
double faults, which were broken (i.e. went only to the double fault
iframe) since we started checking whether the addresses are on the
kernel stack at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26775 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Dumping the features as string is now a one time thing, that only happens
when DUMP_FEATURE_STRING is defined to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26733 a95241bf-73f2-0310-859d-f6bbb57e9c96
- add 040 cpu and mmu stuff
- use leftover from the page root table to put interrupt vector table to set VBR to
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26627 a95241bf-73f2-0310-859d-f6bbb57e9c96
- rewrote early_query() to use the TT0 mapping to remove the page_hole stuff.
- fixed natfeat, using a page set up from the bootloader for now as it wants physical address. At least it's enough to see from the debugger:
load kernel...
kernel entry at 8003711a
Welcome to kernel debugger output!
Haiku revision: 26582
PANIC: unknown cpu_type 68040
Welcome to Kernel Debugging Land...
Running on CPU 0
kdebug>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26599 a95241bf-73f2-0310-859d-f6bbb57e9c96
bootloader's smp init and into its own unit.
ACPI tables can now generally be found with acpi_find_table(signature).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26538 a95241bf-73f2-0310-859d-f6bbb57e9c96
- bitfield definitions of page dirs were reversed... 040 is still wrong though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26528 a95241bf-73f2-0310-859d-f6bbb57e9c96
- move part of mmu handling to mmu-dependant files and extend ops
- implemented 040 mmu init. doing so I spotted a bug in ARAnyM which ignored [ID]TT0. Linux likely doesn't use them but I was too lazy touse temporary page tables. I also noticed bitfields were in wrong order, to be fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26527 a95241bf-73f2-0310-859d-f6bbb57e9c96
though until we use ACPI for proper PCI IRQ routing through the IO APIC.
Therefore the IO APIC code path is not yet enabled and the IO APIC isn't used.
ISA interrupts would work though, as would PCI interrupts if you'd hardcode
them for your specific configuration.
Note that this change also modifies some parts in the bootloader and in the PIC
setup to make local APICs available even on non-SMP systems. This causes APIC
timers to be used instead the normal PIT if it is available (also on non-SMP
configurations).
Also fixes some general errors in SMP and PIC code as well as some code cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26492 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically selected at boot time. Pit and Apic timers are implemented
for now. Thanks Dustin!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26265 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use the platform object to determine the platform type in system_info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26166 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove unneeded include to make those usable by bootloader.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26117 a95241bf-73f2-0310-859d-f6bbb57e9c96
- kernel_m68K almost links now, jsut bails out on the linker script...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26096 a95241bf-73f2-0310-859d-f6bbb57e9c96
