* add edid info storage to display
* pass i2c/ddc information to common i2c code
* add code to read/write i2c/ddc
* i2c/ddc read/write code works 'in theory', needs tested
* detect monitors based on presence of edid on connector
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42718 a95241bf-73f2-0310-859d-f6bbb57e9c96
* rename decode_* to get_*
* clean up get_* text when unknown connector/encoder
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42717 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Progress bar is 8 pixels away fom bottom, right, and icon stripe
* Icon is horizontally positionned like in BAlert
* Move text a bit more to the right
Thanks to diver for the great suggestion mockups.
Note : some of the settings in Notification preflet are now ignored ("title above icon" comes to mind). I think they don't make much sense
anyway, anyone cares if they get removed ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42716 a95241bf-73f2-0310-859d-f6bbb57e9c96
to a panic at boot.
* Make the panic message more explicit when there is no more room left.
This should hopefully fix#7869.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42715 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrite the positionning code properly. There's a remaining bug when deskbar is on the left, but I think it comes from DecoratorFrame()
Tweak the position of UI elements :
* Shift the close cross a bit
* Make the icon stripe the same as in alerts, and align the icon the same way
* Adjust the text position, too
AppGroupView:
* remove the remaining "lines" in collapsed mode (looked like artifacts)
* Grey out the title in collapsed mode
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42714 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Setup the interrupt endpoint on device setup, not start
* Fixup some flags I was setting wrong
* Add even more debug traces
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42712 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use a BStatusBar for progress.
* Smaller icon stripe on the left
* Shift the message title aligned with the rest of the message
* Fix drawing bugs at the right of the window
Thanks to diver for the suggestion mockups!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42710 a95241bf-73f2-0310-859d-f6bbb57e9c96
* few tab fixes
* add Axel as author as the base i2c stuff is from intel_extreme
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42709 a95241bf-73f2-0310-859d-f6bbb57e9c96
* given the rise of other 4G wwan technology such as lte, this
seems cleaner and better matches wlan directory for wifi.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42707 a95241bf-73f2-0310-859d-f6bbb57e9c96
* each active gDisplay references a gConnector index
* add atombios DAC sense.. this really won't be the main call used...
AtomBIOS expects you to attempt an EDID read to detect connected displays
* remove old manual DACSense
* next we attempt to add ddc / edid
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42705 a95241bf-73f2-0310-859d-f6bbb57e9c96
* determine first day of week and draw calendarview accordingly
* some cleanup: drop superfluous DateTimeView::Draw()
* automatic whitespace cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42697 a95241bf-73f2-0310-859d-f6bbb57e9c96
Generic UVC USB Webcam.
* Added my own Logitech HD Pro C910, which publish a compound device class, not an UVC class.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42693 a95241bf-73f2-0310-859d-f6bbb57e9c96
my not so visually inclined taste - we now use a gradient which IMHO gives much
more pleasant results
* add TODO about whether or not code for drawing drop target inidicators should be
added to ControlLook (or some other class with similar purpose)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* following a hint by Stephan: implement drawing of a drop target indicator,
a global one (bounds) for the available languages and an individual drop target
indicator ("between" the items) for the preferred languages
* fix drag'n'drop within preferred languages listview
* finish support for manipulating multiple items in preferred languages listview
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* need to break out connector and encoder addition into seperate functions as
the linux kernel did... that function is getting pretty large and deep.
* my card seems to map everything as TV DAC or TMDS... weird.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42684 a95241bf-73f2-0310-859d-f6bbb57e9c96
uint8 vs a void pointer.
* guys at AMD confirmed that the method looking directly at the object table
should be the only method used on modern cards (r600 or later)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42683 a95241bf-73f2-0310-859d-f6bbb57e9c96
are the same (Eclipse was complaining about 'assignment to self', which got me
looking at the code ...)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42682 a95241bf-73f2-0310-859d-f6bbb57e9c96
it incorporate now "em" and "lem" freebsd drivers.
Note: if_igb is not used - too much "undeclared"
stuff required from the compatibility layer. :-(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42680 a95241bf-73f2-0310-859d-f6bbb57e9c96
* introduces fNextStartingFrame to keep track of the next frame to use on next submit.
* set the IOC bit for the last ITD
* computes multiply field of the ITD based on the packed size (1, 2 or 3).
* use locking around linking of ITD
* free descriptors on errors
* on finishing, whenever a non success status is found, set actual length to zero
* on finishing, when copying data to the Transfer object, copy starting on packet boundaries (skipping unused bytes).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42679 a95241bf-73f2-0310-859d-f6bbb57e9c96
(.c to keep compatibility with older C accelerants)
* use functions for decoding video_electronics
* thanks for the guidance Axel!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42668 a95241bf-73f2-0310-859d-f6bbb57e9c96
* separate LanguageListItemWithFlag from LanguageListItem
* draw the flag in front of the text instead of at wherever the right bounds happen to
be, fixing the drawing artefacts when scrolling
* size the flag to match the size of the list item, which looks much better when
using a largish default font
* use StringItem::BaselineOffset() instead of manually computed (and wrong) offset
when drawing the text
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42667 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also get right of the ugly raster default app icon that was still used and visible in
memory & teams/threads submenus.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42660 a95241bf-73f2-0310-859d-f6bbb57e9c96
NULL-terminated list of driver_t* entries instead of single entry.
That allows to combine multiple FreeBSD drivers into single Haiku
driver add-ons;
* Support for DEC 21140 (Tulip) chipsets (provided by the 'de' driver)
incorporated into dec21xxx driver. That brings network connectivity to
Haiku systems running in MS Virtual PC VMs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42658 a95241bf-73f2-0310-859d-f6bbb57e9c96
Using team_info.args as before was not safe: when truncated, the
entry_ref could be an intermediate folder, which display a folder
icon as team's icon!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42653 a95241bf-73f2-0310-859d-f6bbb57e9c96
* malloc storage for mc state info
* redo pll range struct
* change to ATOM_ENCODER_MODE for connector info
* redo pll calculations to match AtomBIOS requirements
* some structure changes
* no longer init already posted AtomBIOS as it
causes an infinite loop of AtomBIOS calls
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42644 a95241bf-73f2-0310-859d-f6bbb57e9c96
/etc/irs.conf. Untested.
* There are more config files, but I'm not even sure what they are used for.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42643 a95241bf-73f2-0310-859d-f6bbb57e9c96
for message formatting
* adjust LocaleKit to use namespace 'icu', as ICU has been configured to no longer
use a version specific namespace
* adjust LocaleKit to general API changes in ICU 4.8
Note: all software using ICU (like WebPositive) needs to be rebuilt!
Note: the ICU package for PPC needs to be updated before it can be used!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42638 a95241bf-73f2-0310-859d-f6bbb57e9c96
See http://www.acpica.org/download/changes.txt done after 2010-10-13 for info on ACPI changes.
* Adapted the embedded controller to match current FreeBSD one.
There will probably be some issues with these changes initially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42637 a95241bf-73f2-0310-859d-f6bbb57e9c96
* backport fixes to ATOM_IIO_MOVE_ register offsets
* small bit of style correction
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42624 a95241bf-73f2-0310-859d-f6bbb57e9c96
* when TRACE_ATOM is enabled in bios.c, we dump
each accelerant instance of the AtomBIOS rom
to disk in /boot/common/cache/tmp/ (next to usb
hid descriptors in the same file name format)
* these images can be parsed with the AtomDis application
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42622 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory of a file without traversing leaf links (just like lstat()).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42620 a95241bf-73f2-0310-859d-f6bbb57e9c96
include all supported video modes. Fixes#4166.
Note that this change will probably show several weird resolution is some
configurations. They are all valid resolutions but are not commom so we need
a way to filter those out.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42600 a95241bf-73f2-0310-859d-f6bbb57e9c96
faster than before.
* This also solves a TODO in dladdr(), although I did not use
get_library_symbol() as I didn't quite see how that could fit as the comment
suggested; there is now a new function get_symbol_at_address() for this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42598 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add igp property to pciid map
* add disabled bios pull for r700 and ni cards
* refactor model numbering as >R700 AMD switched
to named card families
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42596 a95241bf-73f2-0310-859d-f6bbb57e9c96
semaphore is created :)
* delete semaphore on AtomBIOS destroy
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42590 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add atom_parse_cmd|table_header functions to evaluate
data structure versions
* convert asic function to status_t and reflect
execute_table result
* cleanup logic in destroy atombios parser function
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42589 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use it in notification window for better positionning.
Thanks augiedoggie for reporting the problem !
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42588 a95241bf-73f2-0310-859d-f6bbb57e9c96
* backport additional bugfixes from drm version
* add logic to detect infinite execution loops
* add a semephore to prevent multiple executions on
non-thread safe code ( this needs testing )
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42585 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add missing header for some radeon registers
* begin removing now un-needed direct register calls
* move and refactor crtc functions
* fix function naming to be clearer
* create more AtomBIOS style calls
* this will eat your cat at the moment, don't bother testing
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42582 a95241bf-73f2-0310-859d-f6bbb57e9c96
(we aren't taking ownership of this one.. yikes)
* add first AtomBIOS call to test the waters
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42578 a95241bf-73f2-0310-859d-f6bbb57e9c96
* only create_area if we found a valid AtomBIOS
* lock down write access to kernel AtomBIOS area after populating
* remove locking on kernel AtomBIOS area as it's not needed
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42573 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove some un-needed log messages
* memset area from create_area just incase
* add enabled bios read in addition to disabled one
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42566 a95241bf-73f2-0310-859d-f6bbb57e9c96
* AtomBIOS is now loaded and passed into the radeon_hd accelerant
* correct pointer passing in bios_init
* AtomBIOS is now read and initialized by AtomBIOS parser
* feel free to start testing the driver again :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42564 a95241bf-73f2-0310-859d-f6bbb57e9c96
* better error checking
* the driver can now locate the AtomBIOS on real hw!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42558 a95241bf-73f2-0310-859d-f6bbb57e9c96
* implement various methods to pull AtomBIOS from card
* add some missing registers to headers from linux drm driver
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42553 a95241bf-73f2-0310-859d-f6bbb57e9c96
* clone VGA rom shared area in accelerant
* enable access, and make a copy of the VGA bios
* give malloc'ed VGA bios pointer to AtomBIOS parser
* Still invalid BIOS magic
* TODO : Move atomBIOS pointer and reorganize some stuff
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42550 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Point AtomBIOS to PCI rom mapped in memory
* Things no longer crash, but we get an Invalid BIOS Magic error
in the logs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42543 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pull pci_rom base address from pci subsystem
* Point AtomBIOS parser to pci rom address
to set up and malloc atom_context
* This is untested! Don't run on an
expensive card until I test it on a cheaper
one!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42541 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactor AtomBIOS parser to use non-linux-kernel calls
(normally I would keep it as-is and do wrappers, but the
AtomBIOS parser has been rewritten from scratch twice
by its creator in the last 5 years.. so eh.
* Refactor AtomBIOS parser to be more haiku-like stylewise
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42538 a95241bf-73f2-0310-859d-f6bbb57e9c96
effect), and since the test was a bit too constraining (I have an LVDS panel on head A), it would prevent setting colors for the CMAP modes.
This finally gets the \n demo working from the original binary from BeOS, without any change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42523 a95241bf-73f2-0310-859d-f6bbb57e9c96
Makes it useable in applications and less confusing. Fixes#6468.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42521 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactor MCFBsetup to be a little simpler for now
* Implement radeon accelerant_device_info for screen preflet
* Re-add CRT Power calls to display code.
* Disable blanking setting for now... just can't figure out
what AMD wants for this.
* Remove some un-needed locking in the scaling code
* Be sure to disable VGA when set_display_mode is called
* Refactor mode setting code to loop over all possible displays
and set the provided mode on the attached ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42515 a95241bf-73f2-0310-859d-f6bbb57e9c96
* xhci controller start operation
* command ring and event ring initialization
* No-Op Command test and real xhci irq handle
* xhci root hub support
* add Super Speed enumeration and xhci_rh.cpp into jamfile
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42511 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add missing Idle call for connectors
* Reformulate blanking.. this should match what the
register is after the GTF vesa call
* Set FrameBuffer to card internal address
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fix crash situation if no monitors detected
* Assume TMDSB if no monitors sensed (temporary)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42508 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fix a few spots where we *should* of been checking for NULL
to prevent referencing a null pointer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42505 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename of_support.h/cpp back to support.cpp as per Axel
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42498 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename a few variables to make more sense
* OF_FAILED is a signed int.. fix return of of_address_cells
* OF_FAILED is a signed int.. fix return of of_size_cells
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42497 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add an option to draw the button directly, i.e. when they are clicked.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42493 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add header file to support of_support.cpp
* Add support functions to obtain address and size cell lengths
* Small style cleanups
* Add support for G5 PowerPC cpus...
* Refactor memory region code to be aware of 64-bit OF addresses.
As-is the boot loader wouldn't start on G5 systems because
OpenFirmware memory base addresses are stored as two 32-bit
unsigned int 'cells' vs one 32-bit unsigned int 'cell' on G3/G4.
I removed the static struct and replaced it with a template
and pass uint32 or uint64 depending on the address cell size.
Thanks for the idea DeadYak!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Each Window has a reference counted WindowStack class which can be shared between stacked Windows. To keep the Decorator separated from Window there is another tab list in the Decorator now. The index of the stacked Window in the window stack is the same as the index of the tab in the Decorator. Properties like title or window focus are managed on a per tab basis now. This mean when you set the title in the Decorator you also have to specify the tab id which is equal to the window position in the stack.
* When drawing the decorator its important that only the top window is doing the drawing. Also the top window drawing engine should be used.
Actually that is only a problem directly after a window is stacked and the other window has still a none empty dirty region. In this case we clear the dirty region of this window and stop the drawing (the top window will draw everything).
* Track if shifting of a tab is still ongoing, i.e. mouse still down.
* The key event filter called the DesktopListener without holding the window write lock. This probably caused #7801 and #7796.
* Commented out assert's in Window::SetScreen and Window::Screen. Add TODO because I'm not sure about the screen access.
This breaks all existing decorators again, sorry guys! Haven't looked into any other then the default decorator (and the SAT decorator). Will not fix the others in the near future so go for it! Since applications should be able to rely on S&T features the other decorator must be able to handle multiple tabs as well. A simple solution would be to draw all title bars in multiple rows. That probably looks quit poorly. Think the better solution would be to draw a tab interface in the title bar, e.g. like in KDE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42478 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove a superfluously assert which sends the app server into the debugger. More fixes following.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42472 a95241bf-73f2-0310-859d-f6bbb57e9c96
can make use of it, and adjust existing callers.
* For nodes that need child creation to be deferred until after value
resolution succeeds, send a request to the view to restore their view state
once child creation is complete. This gets the view state working again
for things like BPoints and other complex structures embedded in a BMessage.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42469 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Create new display.c/h for display management
* Rename global gCRT to gDisplay
* Add CRT connection type into gDisplay
* Add CRT connection index into gDisplay
* Refactor registers for each display into gDisplay via regs
* We now shouldn't freak out too badly on multi-monitors
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42462 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Style fixes as per Axel
* Reintroduce removed OF_FAIL checks
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42460 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Detect OpenBIOS used in QEMU and set machine flag
(OpenBIOS isn't 1:1 Apple OpenFirmware)
* Show at boot which machine type is detected
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42459 a95241bf-73f2-0310-859d-f6bbb57e9c96
requested once the deferred load has been complete, otherwise their values
would never be loaded if their parent node was already expanded while stepping
through the debugger. There still remains an issue with saving/restoring view
state for such nodes though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42457 a95241bf-73f2-0310-859d-f6bbb57e9c96
have been introduced, and also support for interlace mode had been removed.
* Instead, the Screen preferences are now using the common accelerant code for
this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42451 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed excessive debug output, and values that aren't needed for the timing
computation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42450 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Clean up messge and error text
* Begin use B_PRI* macros
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42449 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add "Arrange By" submenu in Window menu.
* You can arrange by the same fields you can sort by in list view. Changing your sorting order in list view will change the Arrange By choice when you enter icon view and vice-versa.
* Support ReverseSort order.
* Keep the clean-up feature, but it's now under the Arrange By menu.
Fixing ticket #1349.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42448 a95241bf-73f2-0310-859d-f6bbb57e9c96
new asynchronous mouse tracking. Sorry for the delay. Up to now it was needing
mouse moves to autoscroll, it now behaves as before.
* Removed check that was disabling regular drag'n'drop auto-scrolling when
inactive. I don't see an obvious reason why that was done, as it's just handy
and is consistent with the other behaviors when inactive.
Note, i gotta love those comments that do anything but help, good example of
how not to comment :) i.e don't comment about what will happen when the
adjacent code won't be executed (especially in a case that can't happen).
My brain almost exploded a second time trying to explain that!
// selection scrolling will also work if the window is inactive
Should read:
// disable drag'n'drop auto scrolling when window is inactive
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42447 a95241bf-73f2-0310-859d-f6bbb57e9c96
- When using the graphical debugger by default, fall back
to setting up gdb handover if the GUI is unavailable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42446 a95241bf-73f2-0310-859d-f6bbb57e9c96
teams to the native debugger instead. This assumes the latter is installed
in /boot/system/apps.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42445 a95241bf-73f2-0310-859d-f6bbb57e9c96
This especially avoid bringing tracker windows up to front when staying idle
over a tracker window while holding down a button. This could happen when
hovering while still holding a scroll thumb of another overlapping window.
Fixes regression #7829 introduced in r41892
* Also properly reinitialise the cached dragMessage on B_EXITED_VIEW,
otherwise it would still think it is dragging and thus still pass through my
above fix.
I'd like to cleanup the drag message caching mechanism as it's not
pretty in my opinion. Possibly even adding it to BView.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42441 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Keep track of the correct number of initial modes available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42438 a95241bf-73f2-0310-859d-f6bbb57e9c96
trace view, but we have a call frame matching that function, then jump
to that frame in the stack trace view as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42437 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Since it now doesn't crash anymore; set it as default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42436 a95241bf-73f2-0310-859d-f6bbb57e9c96
* I got the downsampling version completely wrong. It should now be much better.
* A small bug in the delta calculation sometimes caused an off-by-one read to the source and a crash of the media add-on server
Effect of this resampler can be heard very clearly using the following setup in Cortex :
* Demo Audio producer producing a sinewave at any frequency (sampling rate is hardcoded at 44100Hz)
* Audio output set to 48000 Hz
* system mixer in between
select either resampler in the mixer and you'll hear the difference immediately.
Should finally fix#1351.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42435 a95241bf-73f2-0310-859d-f6bbb57e9c96
exception table address at the wrong location, leading to totally bogus values
for the alignment factors and return register, which ultimately resulted in
failing to reconstruct the CFI. (.eh_frame Format reference:
http://refspecs.freestandards.org/LSB_3.0.0/LSB-Core-generic/LSB-Core-generic/ehframechpt.html )
Fixes#7818.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42434 a95241bf-73f2-0310-859d-f6bbb57e9c96
preflet. Replacing B_TRANSLATE with B_TRANSLATE_COMMENT to better discern "never" and
"Never".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42426 a95241bf-73f2-0310-859d-f6bbb57e9c96
This gets sliders with custom, non-rectangle thumbs, like the one in APlayer or the example in the BeBook, working properly.
I hope it doesn't break anything - it doesn't seem to but I may have overlooked some pixels.
Fixes#7817.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42425 a95241bf-73f2-0310-859d-f6bbb57e9c96
added to the mode list (in 60 Hz, but that doesn't really matter).
* It does this by iterating over the modes found, and computes the
display_timings from them using the GTF code.
* This should help with one of the problems of ticket #7751.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42421 a95241bf-73f2-0310-859d-f6bbb57e9c96
into a usable function - this has some coding style issues I did not care to
fix.
* _AddBaseMode() now computes the mode in case it is not present in the list
yet.
* This should help with bug #7787.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove read32MC as it doesn't apply to radeon cards >= r600
* Add tmds.cpp for tmds connected monitor management (current radeons
only have TMDSA for the moment) still needs TDMSPower, etc.
* Add some MC calls to mode.cpp, causes KDL so commented out atm.
* Add command to idle all DACs (although POWER_RESET doesn't do
anything on DACs, we should be consistent)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42416 a95241bf-73f2-0310-859d-f6bbb57e9c96
