TraceOutput for output options instead.
* Added "traced" option --difftime. Instead of the absolute system time
it prints the difference time to the previously printed entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23864 a95241bf-73f2-0310-859d-f6bbb57e9c96
for finding this. This should fix bug #1734.
* Removed unused BWindow members and the temporary PrintToStream() method.
* Indentation cleanup (DirectWindow.h had some spaces instead of tabs).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23863 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added sigmask() macro.
* Fixed libutil.h I broke yesterday: it's thought to add functions only if
you've included some other headers before; added the correct header guard
we're using for our sys/param.h.
* Added pidfile.c to the build.
* Fixed warning in realhostname.c, and pidfile.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23840 a95241bf-73f2-0310-859d-f6bbb57e9c96
When specified it desigantes that the interrupt handler should not lock the
vector with a spinlock when executing the installed interrupt handlers. This
is necessary to allow the same interrupt vector to be handled in parallel on
different CPUs. And it is required for the CPU halt to work synchronously when
there is more than one AP CPU. Though the acquire_spinlock() should cause IPIs
to be processed, only this fixed the SMP_MSG_FLAG_SYNC problem for me.
Not locking is safe as long as it is guaranteed that no interrupt handler is
registered or removed while the interrupt handler is running. We can guarantee
this for the SMP interrupt handlers we install in arch_smp_init() as they are
never uninstalled. Probably this flag should be made private though.
Restored the SMP_MSG_FLAG_SYNC when entering the kernel debugger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23838 a95241bf-73f2-0310-859d-f6bbb57e9c96
(must also compare to BSD; I've looked at their sources, but I might have
missed something).
* Added sys/file.h and the flock() system call.
* common_fcntl() could forget to put back the file descriptor on some error
conditions (I guess we should introduce and use a DescriptorGetter class).
* Cleaned up fcntl.h, moved the BSD extensions S_IREAD and S_IWRITE to
sys/stat.h where they belong, and added the missing S_IEXEC to them.
* Added some more comments.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added {get|set|end}usershell() functions.
* Define MAXLOGNAME, and L_SET, L_INCR, and L_XTND.
* The pidfile stuff in libutil.h is now included, too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23827 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added optional tracing for the main operations
* fixed bad pointer arithmetic when reallocating/moving the object's data
* it was impossible to remove the very first space via _RemoveSpaces()
* added a little more variaty to error return codes for some
functions to make them a little more helpful
-> This fixes the bogus space values in DriveSetup (#1737)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23824 a95241bf-73f2-0310-859d-f6bbb57e9c96
HaikuBuildCompatibility.h; this fixes building agp_gart and the intel
extreme driver for BeOS.
* Added sockaddr_storage to HaikuBuildCompatibility.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23823 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While this is not a really good idea for a lock with supposedly little
contention, but it'll fix bug #1731. I haven't tested it yet, but will
do so in a minute :-)
* I will need to rework the slab anyway so that it's possible to use it
as a replacement for our heap, and then I'll switch back to a benaphore
again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23822 a95241bf-73f2-0310-859d-f6bbb57e9c96
destination of the message and it's "what" field are stored. It might be
nice to also get some info about its fields -- maybe as an additional
option.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23810 a95241bf-73f2-0310-859d-f6bbb57e9c96
we now always only use the primary ring buffer.
* Removed secondary ring buffer allocation and member fields.
* Increased size of the primary ring buffer to 65536 bytes.
* The bytes per row register is computed differently for 9xx chips.
* On G33, the overlay does not need a physical address anymore, so we
don't pass B_APERTURE_NEED_PHYSICAL to the allocation anymore for that
device.
* intel_free_memory() accidently added the aperture base to the allocation
and would therefore never free any memory.
* INTEL_RING_BUFFER_SIZE_MASK was shifted one bit to the right, didn't
cause any harm with our buffer sizes, yet, though.
* With these changes, the driver runs stable on a G33 chipset (I have not
yet tested the hardware cursor, though, it might need some work, too).
The only known issue left is that overlay flickers a bit if its buffer
is partially backed up by reserved and allocated memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23798 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed "physical" parameter of GART's bind_aperture() - I don't think this
be of use to anyone.
* Fixed binding/unbinding pages in the Intel GART driver; I accidently shifted
the page offset twice.
* Actually forgot handling of allocated memory in Aperture::BindMemory().
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel now opens up to 8 debugger modules (and puts them into an array;
maybe we'll want to switch to a doubly linked list when there is the need).
* Implemented an example debugger module that prints a stack trace of the
current thread when the kernel debugger is entered (not included in the
image).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23794 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now uses the AGP GART module for memory management. This greatly simplifies
the memory handling, and memory is now actually allocated on demand,
instead of a fixed size (stolen memory is not freed, though).
* The Intel GART module should now also work with older chipsets.
* No longer remove the GTT size from the stolen memory; this appears to have
been a mistake in the X driver. Not sure about the BIOS popup yet.
* The AGP module (in combination with the Intel GART module) is now mandatory
to use the Intel driver.
* Removed now superfluous settings (like memory size). Only enabling/disabling
the hardware cursor is still supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23781 a95241bf-73f2-0310-859d-f6bbb57e9c96
(I guess frenchies are guilty here, as mmu_man's ThemeAddOn have the same disease...)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23757 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It now also serves as a generic GART manager and accepts bus modules as well
as custom modules of graphics drivers if they want to (could be used for the
Radeon PCI GART stuff, for example).
* Implemented GART support module for Intel i965 and G33 chipsets (the other
Intel chips will come later).
* Renamed agp bus manager to agp_gart to reflect its new functionality (even
though the AGP functionality is already outdated (due to PCIe), the GART
stuff remains current).
* Adapted existing users of the AGP bus manager to the API changes.
* Not very well tested yet...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23754 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some defines needed when playing with the bridge controller.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23753 a95241bf-73f2-0310-859d-f6bbb57e9c96
work on haiku... let's start reverting some headers changes I did,
although these don't look harmful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23729 a95241bf-73f2-0310-859d-f6bbb57e9c96
move it to its own file, but it's not implemented yet... we'll see.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23717 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set_gtt_entry() used the wrong index to fill the GTT - this could have never
worked correctly when you specified more memory than the amount of stolen
memory.
* Implementing maintaining resources for emulating overlay using the 3D engine
on i965. I don't yet commit the actual overlay code, as that is a) ugly, and
b) does not work yet.
* Moved AreaKeeper into its own header.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23709 a95241bf-73f2-0310-859d-f6bbb57e9c96
For commands with this flag set, the parser won't parse the
arguments provided (it will only check for matching parentheses and
brackets), but will pass the unparsed argument list string to the
command instead.
* Set the new flag for the "expr" command, so one doesn't have to quote
the expression to evaluate anymore (or put it in parentheses).
* Fixed tokenizing of quoted and unquoted strings in expression mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the public hash_grow() function again (at least for now, it's only
private).
* Removed the newSize argument from hash_grow(); it will compute the new size
automatically.
* The block cache is now using hash_insert_grow() instead of hash_insert()
which should make hash lookups much faster with some 10 thousand blocks,
also increased the initial table size from 32 to 1024...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23692 a95241bf-73f2-0310-859d-f6bbb57e9c96
kSyscallParametersInfos to kExtendedSyscallInfos) and added "name"
field. Now the classes for syscall kernel tracing don't need to lookup
the syscall function symbol anymore, which speeds up printing/filtering
of those entries dramatically.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23687 a95241bf-73f2-0310-859d-f6bbb57e9c96
is recorded in a kernel trace entry (if tracing is enabled).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "printteam" switch to "traced" command, enabling the printing of
the team ID.
* Added "team" filter to the "traced" command expression language.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23684 a95241bf-73f2-0310-859d-f6bbb57e9c96
write code aligned to what one has written in the comment (or the
other way around).
* Made trace_entry structure doubly linked, by introducing a
previous_size member. By using bit fields, shrinking the flags field
to 4 bits, and not saving the lower two bits of size and previous_size
(which are always 0 due to alignment), the structure remains 4 byte
sized and can still address the same entry size.
* kBufferSize is no longer one less than it could be.
* "traced" command:
- Use static variable for the iteration state rather then cluttering
the temporary debug variable name space.
- The <count> parameter can now be negative, in which case the entries
before (and including) <start> are printed.
- Added a new optional parameter, specifying the maximal number of
entries to be filtered. Filtered iteration is beautifully
comfortable now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23678 a95241bf-73f2-0310-859d-f6bbb57e9c96
command usage texts, which can be too long for kprintf().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23677 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add platform methods for timer as it is platform dependent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23673 a95241bf-73f2-0310-859d-f6bbb57e9c96
Implemented palette mode and fixed bugs listed at ticket #1701. Thanks
for your work!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23671 a95241bf-73f2-0310-859d-f6bbb57e9c96
boolean operators ("not", "and", "or") and filters matching thread IDs
or contained strings.
I'm still not fully happy with the command. It should be possible to
define a filter and then comfortably scroll through the matching
entries. Currently having to specify an index range of the unfiltered
entries is rather unhandy in combination with filtering.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23658 a95241bf-73f2-0310-859d-f6bbb57e9c96
So now there's a central place to enable tracing in general and for
individual components.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23645 a95241bf-73f2-0310-859d-f6bbb57e9c96
used it for an hour or so, I really wonder how we could live without it.
:-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23640 a95241bf-73f2-0310-859d-f6bbb57e9c96
about syscall parameters. Particularly interesting is a type_code field
for each parameter. The mechanism isn't very accurate, but we can
classify everything in string, pointer, and integer types.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23618 a95241bf-73f2-0310-859d-f6bbb57e9c96
blocks into the new transaction, but it would set that transaction on all
blocks of the old transaction, too. Also, it did not correctly update the
num_blocks/sub_num_blocks fields of the old transaction. Even worse, it did
return B_OK instead of the ID of the new transaction...
* get_writable_cached_block() did not correctly maintain the number of blocks
in the sub transaction.
* write_cached_block() did not free the original_data of a block when it wrote
it back as part of a previous transaction.
* Changed "cookie" for cache_next_block_in_transaction() to "long", so it will
be 64 bits when needed.
* Improved the API for detaching sub transactions: you can now get the blocks
of only the main (parent) transaction as well, added new
cache_block_in_main_transaction() function.
* BFS now flushes the log when there is no space left for the current
transaction.
* _WriteTransactionToLog() allocated a "vecs" array, but never freed it.
* _WriteTransactionToLog() now also supports detaching the current sub
transaction if the whole thing is getting too large (it will now also panic
if that doesn't work out).
* Removed a useless optimization: making the blocks available in the cache
isn't really needed, as all blocks in a transaction are locked into the
cache, anyway.
* Implemented Transaction::WriteBlocks().
* Minor cleanup, removed some dead code, fixed warnings in the fs_shell's
block_cache when compiled with debug output on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23610 a95241bf-73f2-0310-859d-f6bbb57e9c96
add_debugger_command(), but additionally takes parameters "usage"
and "flags".
* Added add_debugger_command_alias() which creates another name for an
existing command.
* Added print_debugger_command_usage() to print a command's usage.
* invoke_debugger_command() intercepts invocations with "--help" and
prints the command's usage text, if it is known. If unknown, the
command will be called normally.
* Made use of the new functions in debug.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23573 a95241bf-73f2-0310-859d-f6bbb57e9c96
a command is executed anymore. Instead the least recently used
temporary variable is overwritten, if there's no free slot for a new
temporary variable.
* Removed the special handling for the command result variable ("_"). It
just works like any other temporary variable, now.
* Individual temporary variables can be removed (e.g. using the "unset"
command).
* Added unset_all_debug_variables() and "unset_all" command to unset
all persistent and temporary variables.
* Removed remove_all_temporary_debug_variables and renamed
remove_debug_variable() to unset_debug_variable().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23568 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As a temporary work-around for the current slab allocator's area usage,
I added the CACHE_LARGE_SLAB flag, which will force the allocator to
use larger areas.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23564 a95241bf-73f2-0310-859d-f6bbb57e9c96
that is a little more powerful than BeOS'. It features:
- Persistent and temporary uint64 variables. The former kind is set
only by the user. The latter (those prefixed "_") can be set
automatically by commands, thus e.g. making it easier to access
members of a dumped structure. They are unset when the next command
is invoked. The special temporary variable "_" is defined as a
command's return value.
- Expressions can contain nested command invocations using brackets
("[ ... ]").
- Command lines are parsed by the expression parser, too. They can
contain command invocations (in brackets) and expressions (in
parentheses).
* Added debugger commands:
- expr: Evaluates the given expression and prints the result.
- unset: Undefines a variable.
- vars: Prints the values of all defined variables.
* Moved debugger command code into its own source file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23546 a95241bf-73f2-0310-859d-f6bbb57e9c96
(suggested by stippi). The movement threshold will be subject to
changes, as I only tested on vmware and it's probably too high.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23528 a95241bf-73f2-0310-859d-f6bbb57e9c96
transaction ends or has been aborted.
* BFS now listens for transactions when it created an inode to see if
the transaction will be aborted without freeing the inode (in which
case it will panic for now).
* Started implementing tracing support, but it's not working yet.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23492 a95241bf-73f2-0310-859d-f6bbb57e9c96
As (our) gcc unfortunately uses atexit() to clean up lazily initialized static
variables inside functions we have to ensure that we do the right thing with
unloadable shared objects. In case a shared object was unloaded that installed
an atexit() hook the application would crash on exit. We now implement a
callback into libroot that is used to call all the atexit() hooks of a
component that is to be unloaded. Most prominently this fixes the media_server
crash at shutdown.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added function to allocate space in the buffer.
* Dump() now fills a buffer instead of printing its data directly.
* This allows the new "#pattern" argument of the "traced" command to
work. When you're using that, the index of the trace entry is printed
out, too, so that you can then get a full dump around the hits.
* Added an AddDump() method to the AbstractTraceEntry class so that
there is no need to call the inherited function anymore.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23479 a95241bf-73f2-0310-859d-f6bbb57e9c96
will not accept if the allocator returns NULL and crashes instead
(ie. not compiling in tracing would have crashed if some module tried
to use it).
* Added total entries count to the KDL command output.
* Fixed computing the start index of the KDL command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23460 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented an optional tracing layer that can be used in the kernel.
Nice to use if you don't have serial output or need something that doesn't
slow down the system as much.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23447 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Move most of MIME database support out of libbe and into registrar
* Use the (async) MessageDeliverer instead of a synchronous SendMessage in _SendMonitorUpdate
This fixes a deadlock when the message port of a MIME database watching
application gets full as documented in bug #1311.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23423 a95241bf-73f2-0310-859d-f6bbb57e9c96
which already existed in the region backend ported from XOrg
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23394 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
resized but still had dirty pages to be written back,
vm_cache_resize() (which is called with the inode lock being held)
deadlocked with the page writer.
* Now, I reintroduced busy_writing: it'll be set by everything that
writes back pages (vm_page_write_modified(), and the page writer),
and will be checked for in vm_cache_resize() - other functions are not
affected for now, AFAICT.
* vm_cache_resize() will clear that flag, and the writer will check it
again after it wrote back the page (which will fail when it's outside
the file bounds), and if it's cleared, it will get rid of the page
(if the file has been resized again in the mean time, writing it will
succeed then, and we'll keep the page around).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23334 a95241bf-73f2-0310-859d-f6bbb57e9c96
appear: when freeing a modified page, it wouldn't have a cache
anymore, but set_page_state_nolock() depended on it.
* To work around this, I added a vm_page_free() function, which the
caches that free modified pages have to call (but others may, too).
It will correctly maintain the sModifiedTemporaryPages counter in case
the cache has already been removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23318 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved GetMouse() calls near the check for exit conditions.
Reorganized a bit the code, and hopefully simplified it in some places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23229 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented mapping the GTT area for i9xx chips other than the i965. This should also fix the
driver working with these chips at all.
* The memory used by the driver now take the GTT area into account - before the GTT could be
overwritten theoretically...
* Added fix for some i965 quirks from the X driver.
* Added some overlay definitions for the i965.
* Started support for G33 overlay (not complete yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23220 a95241bf-73f2-0310-859d-f6bbb57e9c96
Replaced IDE_ADAPTER_IS_PRIMARY by IDE_ADAPTER_CHANNEL_INDEX to support more than 2 bus master channels,
and made ide_adapter aware of 3rd and 4th channel when calculating bus master dma address.
Fixed bus master DMA support in legacy_sata driver for tertiary and quaternary channel, channel 3 and 4
were using the DMA engine of primary and secondary channels (that might have destroyed your data).
Use PCI_address_io_mask instead of ~PCI_address_space (no functional change).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23207 a95241bf-73f2-0310-859d-f6bbb57e9c96
_LoadDefaultSettings() if no settings were loaded already, in order to
return valid values. Renamed private methods to fit our guidelines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23204 a95241bf-73f2-0310-859d-f6bbb57e9c96
- in order to set cursor position SVGA_CURSOR_ON_SHOW has to be written to register SVGA_REG_CURSOR_ON.
- do not use alpha cursor because it does not support inverting of source pixels.
- Fixed wrong usage of if-statement inside switch-statement
- Sync at end of SCREEN_TO_SCREEN_BLIT so that app_server does not write to frame buffer while accelerated operation is still running.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23193 a95241bf-73f2-0310-859d-f6bbb57e9c96
* improved naming of some private BView functions and used our underscore
prefix
* added a _DrawAfterChildren method to BView which does the necessary setup
and calls the DrawAfterChildren hook
* call the new _DrawAfterChildren method in the BWindow implementation, this
was easy since the view tokens are already hierachically sorted
* implement support for B_DRAW_ON_CHILDREN in the app_server's ViewLayer, it
simply means that children are ignored for the views clipping region, any
drawing methods will paint over children (therefor the B_DRAW_ON_CHILDREN
flag is even properly named)
With these changes, support for B_DRAW_ON_CHILDREN and the DrawAfterChildren()
hook are implemented and behave exactly as on R5 as far as I can tell, also
for the view background painting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23154 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented MakeSpace() (not yet tested).
* Changed intel_wait_engine_idle() to spin() between reads and to timeout
after 1 second of waiting (could probably be done way earlier).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23120 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI is evaluated first as it also handles things like multi core or hyper threading setups
* Removed other (disabled) hyper threading code per the notes in the corresponding ToDo
* Limit the detected CPU count to 2 for now as I wasn't able to get it working in either emulation nor real hardware with more than 2 CPUs
* Added a reserved byte to the mp_config_table struct, it worked only by luck as the compiler did padding there to get to the same size
I can now boot my Core 2 Quad with two out of four processors active :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23100 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Therefore, I've added an I/O control that let's it update the boot block
part of this block, so that makebootable can use it on a mounted volume
(this will probably be moved into a disk system API later).
* Added user_memcpy() to the fs_shell.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23082 a95241bf-73f2-0310-859d-f6bbb57e9c96
exit status of (non-main) threads of a team. Fixes bug #1644.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23009 a95241bf-73f2-0310-859d-f6bbb57e9c96
passes that information on to the kernel. This should fix wrong bytes per row with
certain resolutions and graphics cards.
* The boot loader now recognizes 15 bit modes that are advertised as 16 bit modes.
This should fix wrong colors in 16 bit modes on some cards.
* Reenabled setting MTRR for VESA mode - don't remember why I disabled it, but it
works fine on my test machines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23006 a95241bf-73f2-0310-859d-f6bbb57e9c96
serial output, and puts it into the new kernel_args::debug_output field.
* syslog_init() will now check if there is anything in kernel_args::debug_output
and will put that into the syslog buffer.
* dump_block() now also prints an offset.
* Fixed warning in mmu.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23003 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The debug_server now sends the registrar messages whenever the debug alert
is shown, and also, if the user wants to debug the team.
* In the latter case, the registrar will now cancel a shutdown process.
* Also, it will now wait with the shutdown process until the user has
acknowledged the debugger alert.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22926 a95241bf-73f2-0310-859d-f6bbb57e9c96
* it now updates the partition data,
* the flags,
* and the disk geometry - and that now allows the session add-on to actually
detect a newly inserted CD.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22918 a95241bf-73f2-0310-859d-f6bbb57e9c96
the complete extent info or not.
* file_map_translate() now cuts down the request to the file bounds.
* Adjusted BFS and FAT to the API changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22913 a95241bf-73f2-0310-859d-f6bbb57e9c96
device geometry.
* If SetTo() reports no media, and GetGeometry() fails, the device geometry
is now reset as well.
* KDiskDeviceManager::_ScanPartition() no longer unmarks the partition busy;
this is now done by the caller, and done independently from the outcome of
_ScanPartition(). This also fixes the problem that devices with no media
were never marked unbusy (and thus were ignored subsequently).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22912 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added vfs_unmount(), which allows unmounting by dev_t (used by the DDM).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22910 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Unmount when uninitializing a partition.
* Finished the media checker implementation, i.e. we rescan when a media
was inserted and uninitialize when ejected.
* Turned the disk device media checker from a kernel daemon into a thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22909 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can be used by file systems.
* Changed the way the file cache works: instead of reading/writing to the
underlying device directly, it can now be used for any data source, ie.
also network file systems.
* As a result, the former pages_io() moved to the VFS layer, and can now be
called by a file system via {read|write}_file_io_vec_pages() (naming
suggestions are always welcomed :-)). It now gets an FD, and uses that to
communicate with the device (via its fs_{read|write}_pages() hooks).
* The file_cache_{read|write}() functions must now be called without holding
an I/O relevant file system lock. That allows the file cache to prepare the
pages without colliding with the page writer, IOW the "mayBlock" flag can
go into the attic again (yay!).
* This also results in a much better performance when the system does I/O and
is low on memory, as the page writer can now finally write back some pages,
and that even without maxing out the CPU :)
* The API changes put slightly more burden on the fs_{read|write}_pages()
hooks, but in combination with the file_map it's still pretty straight
forward. It just will have to dispatch the call to the underlying device
directly, usually it will just call its fs_{read|write}_pages() hooks
via the above mentioned calls.
* Ported BFS and FAT to the new API, the latter has not been tested, though.
* Also ported the API changes to the fs_shell. I also completely removed its
file cache level page handling - the downside is that device access is no
longer cached (ie. depends on the host OS now), the upside is that the code
is greatly simplified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22886 a95241bf-73f2-0310-859d-f6bbb57e9c96
system by pretty name (not only module name) now.
* _user_initialize_partition() loads the disk system by pretty name.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22880 a95241bf-73f2-0310-859d-f6bbb57e9c96
think it wasn't a really good idea. The alignment of shortcut
charachters and submenu symbols could use some more work, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22849 a95241bf-73f2-0310-859d-f6bbb57e9c96
actually forgot to commit the changes I made to the ide_adapter...
* the IDE bus master command/status stuff is now used via flags; it's no
bitfield anymore.
* Changed a few constants to upper case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22842 a95241bf-73f2-0310-859d-f6bbb57e9c96
K{Disk,File,Partitioning}System writing methods. It is now required
that the caller has marked the concerned partitions busy, hence we can
(read-)access them without needing a lock. The module interfaces will
will be changed to take advantage of the fact as well. The methods take a
disk_job_id instead of a KDiskDeviceJob* now, though I haven't quite
decided, whether we need it at all or just want to add a special
handling in the cases where notifications during the operation make
sense.
* Reimplemented the disk device write support syscalls (save
_user_move_partition() for which other module hooks are needed). They
call the KDiskSystem methods, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22832 a95241bf-73f2-0310-859d-f6bbb57e9c96
weren't in sync with the non-inline version in libroot anymore, and aren't
really performance-critical anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22827 a95241bf-73f2-0310-859d-f6bbb57e9c96
Abstracted cpu and mmu version dependant stuff (compatibility where are you) into ops like func arrays.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22821 a95241bf-73f2-0310-859d-f6bbb57e9c96
synchronous scanning is supported.
* Removed the disk device job support from the disk device manager.
* K{Disk,File,Partitioning}System:
- Remove querying and validation methods.
- Commented out the modification methods until their fate is decided.
* Removed obsolete _user_get_partitionable_spaces().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22799 a95241bf-73f2-0310-859d-f6bbb57e9c96
(_kern_{supports,validate}_*(), etc.).
* Adjusted the prototypes of the disk device modification syscalls.
Commented out their implementations for the time -- they'll mostly
have to be rewritten completely.
* Implemented the userland disk device jobs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22781 a95241bf-73f2-0310-859d-f6bbb57e9c96
acceleration works fine, but overlay doesn't - that's next on my list.
Turns out the i965 differentiates between RGB-32 and RGB-32-alpha, and
didn't like trying to use the latter as display mode (the i865 didn't
care at all)... finding that took me *way* too long, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22780 a95241bf-73f2-0310-859d-f6bbb57e9c96
Mac is there already (TODO: rename some stuff from apple to mac).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22770 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added missing job classes (they don't do anything yet, though) and
completed the implementation of the job generator.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22767 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove DOS CR from some files.
Add setjmp stuff for m68k (unfinished).
Moved arch specific stuff out of signal.h to arch/<arch>/signal.h
Added m68k vreg for signal.h (unfinished).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22703 a95241bf-73f2-0310-859d-f6bbb57e9c96
We will use SRP (supervisor root pointer) register to hold the current thread pointer.
Its use by the pmmu is optional and I don't plan on using it.
There are 32 other bits left.
Wonder if weshouldn't use it for system_time() instead... will see, but there are no other usable regs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22696 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote TextView.h
* Renamed all private methods to have the underscore prefix.
And also:
* Whitespace and line width cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22688 a95241bf-73f2-0310-859d-f6bbb57e9c96
next/prev link order - that messed up the DoublyLinkedListCLink adapter.
* Since it's more likely that someone messes with the C version, the C++ version
now uses the same order than that one.
* This fixes a bug when TCP's BufferQueue tried to iterate over a list, messing
up its integrity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22676 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should help to reduce the number of warnings imported code will throw
during compilation (helps a lot with tcpdump, for example).
* Since long is 64 bit on 64 bit platforms, we might want to think about doing
that change for the Haiku types int32 and uint32 as well.
* Fixed several occurences of hidden type problems.
* Fixed build of the stack and TCP under BeOS.
* Fixed incorrect typedef in socket_interface.h.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22643 a95241bf-73f2-0310-859d-f6bbb57e9c96
Small change and notes on standard compliance by myself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22628 a95241bf-73f2-0310-859d-f6bbb57e9c96
(yes I still use that), but there are more problems, regarding
for example BPrivateScreen definition and the disk device API stuff,
I am kind of clueless regarding those. :-(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22623 a95241bf-73f2-0310-859d-f6bbb57e9c96
status checker now only tries to lock the manager, it won't wait anymore.
* Added MediaChanged() and UpdateMediaStatusIfNeeded() methods to KDiskDevice.
* KDiskDeviceManager::_CheckMediaStatus() now uses these new methods; it should
no longer detect removed media more than once :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22621 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added private _ChildAt() and _CountChildren(), which don't ask the
delegate, thus reflecting the hierarchy as it was before changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22610 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the kernel anymore. The respective functionality will be moved into
the userland. Depending on how we want the API user to interface with
it, we may want to reintroduce a similar class later.
* Cleared remaining references to shadow partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22606 a95241bf-73f2-0310-859d-f6bbb57e9c96
{Prepare,Commit,Cancel}Modifications() using the userland add-on
backend. IsModified() and CommitModifications() are little more than
stubs ATM.
* Made BPartition::VisitEachChild()/VisitEachDescendant() const.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22602 a95241bf-73f2-0310-859d-f6bbb57e9c96
BDiskSystem to BPartition and reimplemented them using the userland
add-on backend instead of syscalls. As a side effect this solves the
TODO I recently added in GetNextSupportedType().
* Reimplemented BDiskSystem::GetTypeForContentType() using the userland
add-on backend instead of a syscall.
* Moved GetTypeForContentType() and IsSubSystemFor() from
BPartitionHandle to BDiskSystemAddOn. They were misplaced.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22592 a95241bf-73f2-0310-859d-f6bbb57e9c96
will happen on earlier i9xx chips for now...). Not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22589 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed Background.h - to be replaced by the one in be_apps (which has OT license)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22579 a95241bf-73f2-0310-859d-f6bbb57e9c96
accelerant (or the app_server via EDID info). It's still experimental
API, and opinions are welcome.
* Moved BPrivateScreen into the BPrivate namespace.
* Rewrote Screen.h.
* Introduced a BScreen::GetMonitorInfo() method, and implemented it in the
app server as well (ie. AS_GET_MONITOR_INFO).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22563 a95241bf-73f2-0310-859d-f6bbb57e9c96
and van Flandern (1968), instead of those inefficient loops we had before.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22557 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now supports the new B_GET_EDID_INFO hook under Haiku.
* Fixed build under BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22551 a95241bf-73f2-0310-859d-f6bbb57e9c96
collection of no-op methods, which could as well be implemented in
BPartition itself. This makes the Delegate hierarchy unnecessary:
MutableDelegate becomes Delegate, and we save a few casts as a side
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22547 a95241bf-73f2-0310-859d-f6bbb57e9c96
builds the object hierarchy, the second will (in case of MutableDelegate)
let the disk systems do their initialization. This way the disk systems
already find a fully functional object hierarchy they can work with.
* Child creation also takes a partition name as a parameter, now.
* Implemented BMutablePartition child creation/deletion.
* The BDiskSystemAddOn/BPartitionHandle::Validate*() methods return a
status_t instead of a bool, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22540 a95241bf-73f2-0310-859d-f6bbb57e9c96
system add-ons. First work to make this class usable for them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22539 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed private AutoDeleter class. The shared ArrayDeleter is used instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22538 a95241bf-73f2-0310-859d-f6bbb57e9c96
the accelerant, as well as its EDID info. B_GET_PREFERRED_DISPLAY_MODE and
B_GET_EDID_INFO are both optional. The preferred mode will be taken from the
EDID info if only the latter hook is implemented, or the former returned an
error.
* Currently, the app_server should correctly set the preferred mode on start,
but no accelerant supports that yet, so it's not really tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22520 a95241bf-73f2-0310-859d-f6bbb57e9c96
to create their mode list. Once it's done, it should cover all possible cases,
and allow the base mode list to reside in the app_server (under Haiku, at least),
so that all drivers will benefit from an updated list.
Right now, it might already work to a degree, but it's not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22517 a95241bf-73f2-0310-859d-f6bbb57e9c96
can be used (and is, by _init_interface_kit()) to initialize the ...
er... default instance of
PaletteConverter using the system color map, thus avoid building the
list of colors, which takes some time. Fixes bug #505.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22508 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page_reserve_pages() and vm_page_allocate_page() will now steal pages from
the inactive queue as needed.
* We currently never steal active pages anymore, but this might need to be
revised later (therefore, the page scanner never waits anymore, but uses
mutex_trylock() to lock a cache).
* The page scanner and writer now both run at normal priority - let's see how
that will work out.
* Introduced an inactive queue.
* Instead of shuffling pages around in the queue (and therefore destroying LRU)
the page stealing mechanism now uses a marker page to be able to release the
page lock without losing its position in the queue.
* The page writer now always grabs the whole release count of the semaphore, so
that there won't be a huge backlog to catch up with.
* vm_page_num_free_pages() now also includes the inactive queue as well as the
reserved pages (they are no longer regarded as free pages).
* Added a insert_page_after() function that inserts a page after another one,
needed by the marker code.
* clear_page() now gets a vm_page instead of a physical address which simplified
some code.
* Removed superfluous initialization of the queues (if those aren't zeroed on
start, we would have serious problems, anyway).
* Removed old and unimplemented dump_free_page_table() ("free_pages") KDL
command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22506 a95241bf-73f2-0310-859d-f6bbb57e9c96
it intended to. That resulted in more writable pages where you wouldn't want
them (ie. allowing the area to change pages in lower caches).
* We were losing modified pages: vm_unmap_pages() sometimes has to preserve
the modified flag (eg. when called from page fault).
* Both of these were responsible that stealing active pages would crash
applications - even if less likely, this could also have happened when
stealing inactive pages. Therefore, I've activated stealing active pages
again.
* The page writer now pushes the pages of busy vnodes to the end of the queue,
so that it won't pick them up again too soon (the vnode destruction would
be in the process of writing those pages back, anyway).
* The page thief now triggers the page writer to run once it has to steal
active pages. This might be a bit too aggressive, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22495 a95241bf-73f2-0310-859d-f6bbb57e9c96
hence CancelInputMethod()), but it implements part of it. To avoid code
duplication, I added a private _SetRunArray() call, which does most of
the work, except cancelling the input method, and calling Refresh().
Removed some unneeded code from CancelInputMethod(), some small changes
in HandleInputMethodChanged.
-Questa linea, e quelle sotto di essa, saranno ignorate--
M src/kits/interface/TextView.cpp
M headers/os/interface/TextView.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22489 a95241bf-73f2-0310-859d-f6bbb57e9c96
busy vnodes.
* dir_create_entry_ref() used get_vnode() incorrectly (and could therefore
potentially prevent a file system from doing proper locking when called
from the kernel).
* The vnode_store now uses this for its acquire_unreferenced_ref()
implementation (and therefore for the page writer).
* read_into_cache() and write_to_cache() were still marked inline.
* The system will now wait 10 secs for a busy vnode before returning an error.
* It will also no longer panic in that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22485 a95241bf-73f2-0310-859d-f6bbb57e9c96
functionality of the kernel add-ons will be moved into userland, which
will simplify the kernel-side significantly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22481 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional partition_data* child parameter now.
* _user_get_partitionable_spaces() doesn't need to copy the buffer into
the kernel, since it is no input parameter. It also copies back the
actual partitionable spaces count on error, now -- B_BUFFER_OVERFLOW
is returned when the buffer was too small, but then the count must be
returned too.
* Fixed several instances of syscall implementations that unloaded a disk
system, although they didn't load it in the first place. This screwed
up the load count with undesirable consequences.
* _user_create_child_partition() would set the size to the supplied
offset.
* Fixed broken loop in KPhysicalPartition::CreateShadowPartition().
* KPartition::RemoveChild() notified the listeners about the wrong
event.
* Intel partitioning module:
- The *_get_partitionable_spaces() correctly return B_BUFFER_OVERFLOW
now, if the supplied buffer is too small.
- Implemented a part of pm_shadow_changed(), which creates and updates
the PartitionMap, so that the validate_*() hooks have a chance to
work at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22475 a95241bf-73f2-0310-859d-f6bbb57e9c96
physical partition, unlike get_partition() which returns the shadow
partition, if it exists.
* Added B_PARTITION_SHADOW[_CHILD] partition pseudo operation values for
the shadow_changed() hook, notifying a disk system, that a shadow
partition has been created.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22472 a95241bf-73f2-0310-859d-f6bbb57e9c96
BPartition structure with the data retrieved from the kernel. For new
partitions the field is not set in the next step and later code would
use an initialized pointer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22471 a95241bf-73f2-0310-859d-f6bbb57e9c96
* his has to be used by the page writer to make sure the vnode is still valid.
* This should have been the final nail on the Luposian bug - I haven't tested
it yet, but we'll certainly see :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22462 a95241bf-73f2-0310-859d-f6bbb57e9c96
interfere with the page thief, we always need to have reserved a page for
this upfront. I introduced a function to the vm_translation_map layer that
estimates how much pages a mapping might need at maximum. All functions that
map a page now call this and reserve the needed pages upfront.
It might not be a nice solution, but it works.
* The page thief could run into a panic when trying to call vm_cache_release_ref()
on a non-existing (NULL) cache.
* Also, it will now ignore wired active pages.
* There is still a race condition between the page writer and the vnode
destruction - writing a page back needs a valid vnode, but that might just
have been deleted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22455 a95241bf-73f2-0310-859d-f6bbb57e9c96
system initialize() hooks. It's often the only info about the
partition one needs and thus locking the partition just to get it is
no longer necessary.
* intel partitioning system:
- Removed passing around block sizes. We require 512 byte sectors
anyway. In fact using the parent partition's block size was even
wrong.
- Simplified writing the partition map sector.
- Simplified and corrected the partition map initialization.
- We don't fail identifying a partition anymore, if the partition map
contains no partitions. We would never identify a freshly
initialized partition map before.
- Made pm_identify() more intelligent: It determines the priority to
return depending on whether the partition is the device itself and
whether we have recognized child partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22447 a95241bf-73f2-0310-859d-f6bbb57e9c96
does no longer give partitioning systems precedence over file systems.
The one with the greater identification priority wins. ATM, if a file
system wins, we still mount the first file system that recognized the
partition at all, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22446 a95241bf-73f2-0310-859d-f6bbb57e9c96
the unmapped page.
* This is needed by everyone who calls this to make sure modifications to a
page aren't ignored. Namely, the page scanner and the page thief were
affected.
* Cleaned up locking the page's cache a bit in page_thief(); there is now
a helper class that takes care of everything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22438 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the page writer don't allow to block, while all other writers do. This fixes
bug #1509. The reason the page writer needs this is because it marks several
pages from different caches as busy.
* Fixed a warning about ASSERT being defined already in BFS, since
util/DoublyLinkedList.h now includes debug.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22434 a95241bf-73f2-0310-859d-f6bbb57e9c96
dprintf() with the exception that it doesn't write anything to the
syslog. The reason is that syslog_write() releases a semaphore and can
therefore not be invoked when the thread spinlock is held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22428 a95241bf-73f2-0310-859d-f6bbb57e9c96
vfs_select.h, respectively moved most of it into the new kernel
private header wait_for_objects.h.
* Added new experimental API functions wait_for_objects[_etc](). They
work pretty much like poll(), but also for semaphores, ports, and
threads.
* Removed the "ref" parameter from notify_select_events() and the
select_sync_pool functions as well as from fd_ops::fd_[de]select(). It
is no longer needed. The FS interface select() hook still has it,
though -- the VFS will always pass 0.
* de]select_fd() take a select_info* instead of a select_sync* + ref
pair, now. Added respective functions for semaphores, ports, and
threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22416 a95241bf-73f2-0310-859d-f6bbb57e9c96
and thread spinlock was reverse in Wait() and Notify(). The thread lock
is now the outer lock -- this way it is still possible to call Notify()
with the thread lock being held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22401 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked the select support:
- The io_context additionally stores a table of lists of select_infos,
which enables it to deselect events of a pending select() when
closing a FD. This prevents a race condition potentially causing a
write to stale memory.
- The opaque selectsync* passed to FSs is now actually a select_info*.
This was necessary, since the FDs deselect() hook (unlike the
select() hook) doesn't take a "ref" argument and deselecting a
single info (e.g. caused by a premature close()) was not possible.
The select() hook's "ref" argument has become superfluous.
- It should now be relatively easy to implement a poll_on_steroids()
that can also wait for objects other than FDs (e.g. semaphores,
ports, threads etc.).
* Set/reset the signal mask in common_select(). This makes pselect()
work as required.
* Reorganized vfs_resize_fd_table().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22391 a95241bf-73f2-0310-859d-f6bbb57e9c96
characters first, and then falls back to take everything. fTrigger is now
uint32 and works with all unicode characters; unlike in BeOS, the
MenuTriggerTest application now works correctly in Haiku.
* fTriggerIndex is now a character position, not a byte position of the label;
this allows BMenuItem::DrawContent() to draw the trigger at the correct
position, even if there are multi-byte UTF-8 characters.
* The above fixed bug #1506; triggers are still not working, though.
* Rewrote Menu.h header.
* Renamed all private methods (that are not called by BWindow) to have the
underscore prefix.
* Removed unused methods.
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22384 a95241bf-73f2-0310-859d-f6bbb57e9c96
components - now, we divide the initialization of that service into two parts
which allows this (before, most handlers were gone after boot).
* Added debugger command that dumps the low memory handlers.
* The slab allocator now registers its low memory handler with a higher
priority, so that it'll run before the potentially heavier ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22374 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We now have a page writer that takes some pages from the modified queue
and writes it back every few seconds. It can be triggered by the page
scanner to do that more often, though. That mechanism can be greatly
improved once we have our I/O scheduler working.
* Removed vm_page_write_modified_page() again - it was all "eaten up" by
the page writer.
* Reworked vm_page_write_modified_pages() a bit: it now uses
vm_test_map_modification() and vm_clear_map_flags() instead of the
iterating over all areas which wouldn't even work correctly.
The code is much simpler now, too.
* You usually put something to the tail of a queue, and remove the contents
from the head, not vice versa - changed queue implementation to reflect this.
* Additionally, there is now a enqueue_page_to_head() if you actually want the
opposite.
* vm_page_requeue() allows you to move a page in a queue to the head or tail.
* Replaced vm_clear_map_activation() with vm_clear_map_flags() which allows
you to clear other flags than PAGE_ACCESSED.
* The page scanner dumps now some arguments with each run.
* Removed the old disabled pageout_daemon() from NewOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22348 a95241bf-73f2-0310-859d-f6bbb57e9c96
arguments into vm.h.
* This should fix the broken build from earlier - thanks Stefano for the note!
* That also allowed to clean some other includes a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22331 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the private VM types are including vm_types.h now.
* Removed vm_page, vm_area, vm_cache, and vm_address_space typedefs; it's
cleaner this way, and the actual types are only used in C++ files now,
anyway.
* And that caused changes in many files...
* Made commpage.h self-containing.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22329 a95241bf-73f2-0310-859d-f6bbb57e9c96
opaque types for C.
* As a result, I've renamed some more source files to .cpp, and fixed
all warnings caused by that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22326 a95241bf-73f2-0310-859d-f6bbb57e9c96
If a Tab is partially out of the window, clicking on it to make it the
active tab will scroll it to be completely visible.
The best solution would probably be having a way to scroll through the
whole list of tabs, or something like this. But for now, at least, makes
the tabbed terminal a bit more useful.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22325 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduced a new vm_page_write_modified_page().
* Resolved a TODO: vm_page_write_modified_pages() did not mark a to be
written page busy but unlocked its cache which could let someone else
steal that page in the mean time.
* Moved the logic when to move a page to the active or inactive queue to
a new function move_page_to_active_or_inactive_queue().
* Moved page_state_to_string() to vm_page(); it's now also used by the
"page" and "page_queue" KDL commands.
* Made the output of the "page_queue list" command more useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22323 a95241bf-73f2-0310-859d-f6bbb57e9c96
