rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
16 bit sun checksum. This flag is needed when making iso 9660 images which
are bootable on both sparc and pmax machines.
this addresses PR port-pmax/10929
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
can not cross a page boundary. This fixes a problem when a dump(8) buffer
just crossed a page boundary and bus_dmamap_load() would coalesce the
the overlap onto the first segment. The NEXTPTR value would get set to
-1 when starting the DMA transfer and the residual data for unaligned
transfers would be copied to physical address 0x1ffffffc. On the R3000,
this would result in corrupted data, and on the R4000 would usually result
in a hard system hang.
both the primary and the secondary caches. MachFlushDCache() will not
invalidate the correct secondary cache lines for KSEG2 addresses.
R4000 systems should now be able to boot and run.
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
sync comments in */version with i386
add a hack to ${PROG} target so that symlinks machine, pmax, mips are
created properly even when building on NetBSD/pmax 1.4.1
device and the id string is not found in option ROM string, but
ULTRIX/OSF1 call it so anyway.
- Squash IOASIC DMA buffer allocation into device attach() sequence.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)
portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
change these from bp->b_un.b_addr to bp->b_data, as well. This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
incorrectly added as a union member which overlaid the keyboard
state structure. Fixed by moving the callout structure into to
keyboard state structure.
rcons_ttyinit() was never added to the pmax rasterconsole stuff. Output
to the display using /dev/console has not been working since then. Adding
the call to rcons_ttyinit() makes this work again.
processor is unlikely able to boot the kernel.
- Correct comments about what mach_init() and cpu_startup() do.
- Relocate cn_tab = &promcd to make ROM console printf() work in the
earliest stage of boot.
variable and cpu_intr() body in machdep.c. Reorder and rename
model specific interrupt handler arguments. Fixup machine/intr.h and
machine/cpu.h appropriately.
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
cpu_fork() mistakenly created processes forked by proc0, including
kthreads, in splhigh condition, because [1] proc0's PCB was zero
cleared during initialization, and [2] value 0 in status register
field made processes to have splhigh condition when CPU tick was
assigned for them. This mostly doesn't matter as forked processes
dive immediately into user mode through proc_trampoline code path,
however, kthreads never do that and remain in splhigh.
Reported by Ethan Solomita <ethan@geocast.com>.
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
This one is more in the spirit of incorrect version which was trying
to shorten the interrupt path. This probably isn't quite as fast as
using a switch() statement to dispatch the interrupts, but should be
a little faster than testing for each of the possible 6 interrupt
conditions.
than one interrupt bit is set (unless you do some fancy case values).
Check each interrupt bit individually and process the interrupt if set.
5000/200 doesn't hang shortly after booting now.
device. Works on a 3100 with both old and MI SCSI, on a 5000/25 built-in
IOASIC with both old and MI SCSI, on the 5000/25 PMAZ TC option card
with both old and MI SCSI, and with tftp boot on the 5000/25.
configured, but after all adapters have been configured. When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot. The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller. Then when the disks are configured, dk_establish()
matches the appropriate controller. Also change the rz boot device test
to include a check for the adapter so that it works when booting from a
disk on adapters other than the first one.
disks are now usable with the MI SCSI sd devices.
The install mini-root adjustment and the default partitioning still needs
to be moved into readdisklabel().
interrupt handlers into intrtab[] array, rather than the idea of devices
in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
interrupt handlers into intrtab[] array, rather than the idea of devices
in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
