81f67879f9
Add vendor ID for Socket Communications, and product ID for the
...
Socket Communcations Dual RS232 card.
1998-08-15 18:55:25 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
7ce9726a7d
Oops, don't forget to tick the MII once a second.
1998-08-15 17:04:52 +00:00
1bbc572701
Fix typos in last commit.
1998-08-15 16:58:53 +00:00
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
53d231dae3
correct indent.
1998-08-15 16:49:33 +00:00
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
3ca5e496cc
Fix a brain'o that caused the 3c589 to not match.
1998-08-15 16:09:46 +00:00
305a943ba7
Use scsi style geometry printout
1998-08-15 15:05:22 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
228f894ea2
This code was written by Jason.
1998-08-15 10:38:03 +00:00
530fef3c8d
Assign my copyrights to TNF.
1998-08-15 10:34:43 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
7d0d0346fa
Define the RoadRunner FIFO count registers.
1998-08-15 08:28:22 +00:00
4b02e4134c
Initialize and enable an interrupt handler, which currently doesn't
...
actually do anything.
1998-08-15 07:42:50 +00:00
ccf620bfab
Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
...
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers. (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
4c88513d7d
Look up the PCMCIA 3Com products in a table-driven fashion, like the
...
PCI products.
1998-08-15 07:25:15 +00:00
d5b735ae79
In the NewMedia callback, make sure we have a LAN Node ID tuple.
1998-08-15 06:56:12 +00:00
2be6d344ab
Use the symbolic name for the tuple code used to find the Ethernet
...
address.
1998-08-15 06:46:33 +00:00
bf886f2029
Assign my copyrights to TNF.
1998-08-15 05:19:50 +00:00
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
c9a799adf6
Assign my copyrights to TNF.
1998-08-15 04:57:50 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
cdf829a998
Assign copyrights to TNF.
1998-08-15 04:22:45 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
239bc62b37
Add a makefile.
1998-08-15 03:57:58 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
08ab3f8338
I didn't write any of this.
1998-08-15 03:36:34 +00:00
06b7eb9001
Explicitly dereference the route timer expiration function pointer.
1998-08-15 03:17:21 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
2b869a383f
Use _CS_OFISA_MD_* callbacks for old, broken OpenFirmware builds.
1998-08-15 02:59:01 +00:00
2a48768678
Debug inst_unconditional_flow_transfer and next_instr_address
...
macros so that single stepping works correctly.
1998-08-15 02:57:28 +00:00
dd769acbfb
Name some constants consistently between drivers.
1998-08-15 02:37:50 +00:00
cc84859459
Map the EISA registers correctly!
1998-08-15 02:30:56 +00:00
196dfd7597
Always map the EISA configuration registers.
1998-08-15 02:26:31 +00:00
e9c5407d64
Only map the amount of space the device actually occupies.
...
Part of PR #5279 , Martin Musemann.
1998-08-15 01:59:25 +00:00
93eb06f9f2
Don't bother with the num_memspace check. It makes some otherwise-working
...
cards (e.g. Xircom CM33) fail needlessly.
From Jan van Doorn <jdoorn@nc.com>, PR #5580 .
1998-08-15 01:41:31 +00:00
582d4a7856
Should not use SCSI_POLL if the system is not cold.
1998-08-15 01:32:55 +00:00
9646d7f100
Add support for the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>,
...
PR #5691 .
1998-08-15 01:20:05 +00:00
7ea79f1cb2
Regen.
1998-08-15 01:18:06 +00:00
be8a202a21
Add the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>, PR #5691 .
1998-08-15 01:17:51 +00:00
b3b533c44d
Keep track if the disk has had done i/o, making it dirty. On last close,
...
or at shutdown, flush the cache if the disk is still dirty and it support
cache flushing. Fixes PRs #5588 (Jim Bernard) and #5589 (Justin Gibbs).
1998-08-15 01:10:54 +00:00
c291189ae9
Have to fix the `(int)curproc' lossage now; kernel builds die here on alpha.
...
BTW, KNF requires the additional, not-technically-need `!= NULL'.
1998-08-15 00:04:00 +00:00
1f4b4ceda6
Add support for the NewMedia BASICS Ethernet. Device info provided by
...
Stefan Grefen in PR #5902 .
1998-08-14 23:31:22 +00:00
5fa0fd5087
Regen.
1998-08-14 22:59:54 +00:00
924090ec6d
Add vendor ID for NewMedia Corporation, and product ID for NewMedia
...
BASICS Ethernet. From Stefan Grefen, PR 5902.
1998-08-14 22:59:35 +00:00
cea8e0a23f
explicitely select the master before trying to access its registers
1998-08-14 20:39:04 +00:00
a8d0a43ffa
2 changes to pciide_probe_wdc() (used in compatibility mode to check
...
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
1998-08-14 20:35:40 +00:00
a5f4270a21
Print program name when entering the debugger
1998-08-14 19:57:01 +00:00
a124d362a5
Minor code cleanups, KNF a couple of bits that got missed and remove
...
register keywords.
1998-08-14 18:04:04 +00:00
d5df55112a
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-14 16:50:00 +00:00
97e83f6e0b
Change the "vm_offset_t"s to "u_long"s for now; eventually, we can make
...
them vaddr_t and paddr_t, as appropriate (after scouring the RPB docs
to know which are phys and virt addresses).
1998-08-14 16:46:09 +00:00
308117258b
Add filecorefs so we get the header files installed.
1998-08-14 13:05:37 +00:00
e3e7e1673f
Fix the NEXT_IA_WITH_SAME_ADDR macro introduced in 1.27: it was finding
...
the first in_ifaddr structure with a different internet address! Reverse
the sense of the test. Spotted by and fix from Eric Haszlakiewicz.
1998-08-14 06:57:54 +00:00
170eadd04c
Add FILECORE filesystem.
1998-08-14 03:56:21 +00:00
0641969cd0
Added a vnode type for filecore fs (VT_FILECORE).
1998-08-14 03:31:16 +00:00
10198359c6
Define filecore mount and filecore node memory types.
1998-08-14 03:29:49 +00:00
922fa73143
Define the filecore filesystem MOUNT_FILECORE.
1998-08-14 03:28:56 +00:00
69244872a4
deffs FILECORE
...
Added filecorefs files.
1998-08-14 03:27:51 +00:00
faf4eed3e3
Initial commit of Andrew McMurry's Acorn Filecore filesystem.
...
This is a read only implementation of the filecore filesystem found
on Acorn RiscPC machines (arm32).
1998-08-14 03:26:12 +00:00
4283228f33
Make message less confusing
1998-08-14 02:20:07 +00:00
183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
ae8bdb1e72
Make sure CIMDIS is set and FLINK is clear in the PCR.
1998-08-14 00:23:26 +00:00
f41c00629b
Garbage-collect vm_offset_t and vm_size_t.
1998-08-13 21:36:27 +00:00
330d142f16
vm_offset_t -> {vaddr_t,paddr_t}, vm_size_t -> vsize_t
1998-08-13 21:36:02 +00:00
aedf80a6e9
Oops, lots of missed vm_offset_t -> vaddr_t changes.
1998-08-13 21:20:47 +00:00
057d49dba3
Second arg of vm_map_insert() is/was a vm_object_t.
1998-08-13 21:12:15 +00:00
09efdbb42d
Oops, this got missed in the vm_offset_t -> vaddr_t change.
1998-08-13 19:15:33 +00:00
e829016cba
Keep d_ncylinders correct
1998-08-13 18:18:54 +00:00
48bf26949f
Report "true" disk geometry; like sd disks do
1998-08-13 18:16:53 +00:00
d0153a96fe
The sense of the pccons_is_console test is backwards
1998-08-13 18:00:05 +00:00
0430a2cf75
Include db_dbgregs.s for ddb
1998-08-13 17:55:41 +00:00
1ae4d7da86
Allow inb/outb and friends to be called from debugger.
...
Crude access to x86 hdw "debug" registers.
1998-08-13 17:54:15 +00:00
67390e1ee2
Make serial line debugging easier to enable and use
1998-08-13 17:41:10 +00:00
9b25897ec0
minor consistency nit: the page index into an anon object is always
...
assigned to from integer types, and it is compared to integers. So
let it be an integer instead of vsize_t.
1998-08-13 17:32:46 +00:00
523a2c670a
Make sure to turn off timeout flag when doing untimeout().
1998-08-13 15:50:57 +00:00
33a864ee58
Fix typo.
1998-08-13 15:15:28 +00:00
55491ea367
Rototill match algorithim. New scheme:
...
1. Does the function claim to be a serial port?
2. Does the function's configuration table present all four
standard ISA com port ranges?
3. Is the device in our table?
New serial devices do not need to be added to the table unless they
fail both (1) and (2).
1998-08-13 15:08:54 +00:00
a461703d7f
Use PCMCIA_FUNCTION definitions.
...
Initialize function ID in new pcmcia_function structures to
PCMCIA_FUNCTION_UNSPEC, not PCMCIA_FUNCTION_MULTIFUNCTION (0).
1998-08-13 15:03:06 +00:00
5417a1681d
Add PCMCIA_FUNCTION_* macros, for function types defined by
...
PCMCIA_CISTPL_FUNCID.
1998-08-13 15:00:02 +00:00
18b4602fd5
Add a comment regarding the broken behavior of the DAFB v7.
1998-08-13 13:45:33 +00:00
dd1665ce4b
Fix typo in SYSEX code.
1998-08-13 12:40:20 +00:00
5350df2953
Per POSIX, fail with EINVAL if advisory locking is attempted on a file type
...
that doesn't support it, rather than using a homegrown EBADF or EOPNOTSUPP.
1998-08-13 10:06:31 +00:00
bf1863d17b
Add genfs_einval(), which does the obvious thing.
1998-08-13 09:59:52 +00:00
7165d3f691
change the value of audio_prinfo.seek from u_long to u_int before it causes
...
too much damange. everything else here is the same in a 64bit vs. 32bit
world, so keep it all simple. the alpha was the only port to have any real
affect for this, and it only very recently begun to support some audio
devices so it doesn't really apply here. 1.3/alpha did not support audio..
1998-08-13 06:28:41 +00:00
0acc329dad
Remove ``#define ovbcopy bcopy''. This exists in sys/systm.h now.
1998-08-13 06:21:38 +00:00
a750861e5d
Mask interrupt by hardware register if possible.
1998-08-13 06:18:27 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
c987d23146
Remove some leftover fluff.
...
Make sure there is no outstanding timeout when the sequencer is closed.
1998-08-13 00:13:56 +00:00
331bfdf5a0
Fix byte order bug I accidentally introduced.
1998-08-13 00:08:53 +00:00
798cb235bc
Oops, I forgot aliases for some old names (10baseT/UTP, 10base2/BNC,
...
and 10base5/AUI).
1998-08-12 23:23:29 +00:00
94e489e277
If the autonegotiation is enabled, the PAR doesn't indicate duplex mode
...
properly! Work around this by determing current active media by taking
the highest-order common bit of our advertised capabilites and the link
partner's.
If the link partner doens't do autonegotiation, then parallel detection will
pick up the media type, which will never be full-duplex, so reading the PAR
is ok in this case.
Bug pointed out by Matthias Drochner, work-around inspired by reading
the dp83840 manual, section 3.9 (IEEE 802.3u auto-negotiation).
1998-08-12 22:41:21 +00:00
d95a6e9dec
Make a variable name reflect a register name.
1998-08-12 22:27:42 +00:00
d4a5a3d0ef
Run the shutdown hook w/ SCSI_AUTOCONF.
1998-08-12 22:15:57 +00:00
58e0098fef
Shut up after close().
1998-08-12 21:36:21 +00:00
b7dab0b3f7
Add SYSEX.
1998-08-12 21:33:43 +00:00
391ef355d5
Handle SYSEX messages.
1998-08-12 21:31:28 +00:00
651d704733
Lower buffer size.
1998-08-12 21:29:29 +00:00
981f0cd0d0
If autonegotiation is enabled in the BMSR, and the BMCR doens't claim
...
that it has completed, report "none" as the active media type.
1998-08-12 20:56:34 +00:00
a24f6f77bf
Ugh, don't print out "autonegotiation failed to complete" if it did.
...
We get these once a second if we're in auto mode, the interface is up,
and there's no carrier.
1998-08-12 20:46:47 +00:00
3292aee22b
Separate special character handling from normal output so that they
...
are obeyed even during an escape sequence.
This is how the original VT100 behaves.
1998-08-12 20:09:47 +00:00
8e12b6c020
stricter parameter check for scrolling regions
...
(PR kern/5954 by Dave Huang <khym@bga.com>)
1998-08-12 20:04:12 +00:00
8b950c2a65
Get rid of AMIGA_UPTBASE.
...
Replace it by a variable, which is initialized in amiga_init.c.
This will make the kernel actually work even if we have lots of Zorro-III
(or DraCo direct bus) i/o space.
1998-08-12 19:46:12 +00:00
c587bae132
Nit: space -> tab conversion. No functional change.
1998-08-12 19:16:24 +00:00
5c76b6a944
The mic preamp is really a property of the input stage, and affects both
...
pass-through and recording.
1998-08-12 19:13:14 +00:00
a5ace63ee2
Associate the preamp with the mic volume in the input class.
1998-08-12 19:09:55 +00:00
916c60de3e
Oops; fix typos.
1998-08-12 18:55:03 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
a2f1d5b822
Add a knob to enable/disable the mic preamp.
1998-08-12 18:47:43 +00:00
f903600948
Add audio at ess.
1998-08-12 18:32:18 +00:00
8415989ddf
Add the PC speaker MIDI attachment.
1998-08-12 18:17:55 +00:00
fa39959a5e
Add a MIDI driver for the PC speaker. This is mostly of hack value,
...
but, hey, lotsa people got a MIDI device now! (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
881b4053a6
Remove some white space.
1998-08-12 18:15:04 +00:00
50ab480a8c
Add a layer to handle emulation of MIDI for synthesizers.
...
It handles decoding of MIDI commands, voice allocation, and translation
it notes to frequencies.
1998-08-12 18:14:01 +00:00
27c5df27d1
Tidy up and rename some functions in the MIDI driver.
1998-08-12 18:11:53 +00:00
5bec554354
Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
...
some 3c905-TX?). Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
5a94869995
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 06:58:42 +00:00
3e40b6ff15
A simple, obvious optimization, now that the loop has been
...
removed from zshard(). Pointed out by Bill Studenmund.
1998-08-12 06:55:24 +00:00
7f2ca20fd9
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 06:52:56 +00:00
b2dc905572
The Performa/LC 58x have a Valkyrie, not the DAFB.
1998-08-12 06:50:37 +00:00
69c09f978c
Be ever so slightly more careful when determining where and what size
...
the frame buffer is.
1998-08-12 06:48:05 +00:00
3e2efa4365
Fix a prototype tyop spotted by Bill Studenmund: s/clnintr/clnlintr/
1998-08-12 06:46:57 +00:00
7d09ad09b4
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 05:42:44 +00:00
3979b06d00
enhanced -> preamp
1998-08-12 03:18:34 +00:00
63526c1ff1
New and improved console framebuffer initialization and autoconfig. This
...
resolves a great many issues, including Performa 58x interrupt handling
and offset displays on some models.
Programs that depend on the old (pre-NetBSD 1.1) grf interface may break.
That's actually a separate issue uncovered by this code, not caused by it.
1998-08-12 02:36:36 +00:00
3ad4ac45f9
Reworked interrupt blocking and unblocking to improve interrupt latencies
...
during context switches.
1998-08-12 01:10:29 +00:00
b0b082ba68
Give the "ep" driver the "mii" attribute.
1998-08-12 00:45:37 +00:00
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
8e7a73c40d
Oops, change previous to use the registered name found in the System V ABI,
...
draft edition as of April 29, 1998.
1998-08-11 21:11:51 +00:00
b3e5811a08
Patch from Takashi NAKAMURA <QZM00427@nifty.ne.jp> to support the
...
Contour 3-button mouse from the Contour Design Corp.
It looks like a Microspeed mouse.
1998-08-11 20:07:59 +00:00
f3dd6e430b
Pull in files.mii
1998-08-11 18:52:52 +00:00
2c639fb882
Cache and microsecond clock resolution on KA46.
1998-08-11 17:52:57 +00:00
cffd2f29ae
Add machine identifier for the PA.
1998-08-11 17:01:41 +00:00
557c338959
Add CCITT & NATM interrupt handlers. (Jonathan Stone).
1998-08-11 12:22:57 +00:00
1f5c14d8ef
ess_audio_channel:active is now used even when DIAGNOSTICS is not defined.
1998-08-11 12:16:22 +00:00
6617ede128
KERNEL_RELOC -> RELOC_KERNEL (Entropy)
1998-08-11 07:05:46 +00:00
a6e73a5576
Actually set all the logical filter bits. Doh!
1998-08-11 05:57:40 +00:00
396881cc5d
Eliminate a potential (but not common) NULL dereference.
1998-08-11 05:47:43 +00:00
271d3df6f3
Fix an obvious bug that caused the multicast filter to always be all 0s.
1998-08-11 04:18:25 +00:00
9b46e98b21
Adapt to attribute name change. Also, deal with 3Com PHYs that report
...
0/0 as their oui/model IDs.
1998-08-11 00:41:44 +00:00
cf231bf251
Adapt to MII changes.
1998-08-11 00:28:53 +00:00
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
d812ed6db7
G/c the 83840 register definitions.
1998-08-11 00:12:20 +00:00
1301693108
Adapt to new MII code.
1998-08-11 00:11:39 +00:00
b1fb3ecb0f
Adapt to the new MII code. This required splitting some structures into
...
if_tlvar.h, since the ThunderLAN PHY driver needs to know some things
about it's parent (and since it can only attach to a ThunderLAN chip,
this is the easiest way).
1998-08-11 00:09:26 +00:00
36db6106a8
Adapt "tl" driver to the new MII code, and add the "mii" attribute to
...
the "fxp" driver.
1998-08-11 00:08:23 +00:00
7779e1dfaa
miibus -> mii, and give it a locator "phy".
1998-08-11 00:06:12 +00:00
f0d19c2ee1
Change the name of the attribute to "mii".
1998-08-11 00:05:36 +00:00
e7643533b6
Adapt to MII layer changes.
1998-08-11 00:03:12 +00:00
e8e237ffc6
Device driver for the Quality Semiconductor QS6612 PHY, found in
...
SMC EtherPower-II cards.
1998-08-11 00:01:03 +00:00
6bae1a0bea
Device driver for the Intel i82555 PHY.
1998-08-11 00:00:28 +00:00
045a100420
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
XXX There is still some work to do wrt. autonegotiation and the
BNC/AUI support in the ThunderLAN PHY.
1998-08-10 23:59:58 +00:00
f66f3b1ba9
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
1998-08-10 23:58:39 +00:00
ad00a98756
Initial generation.
1998-08-10 23:56:19 +00:00
3f8be46d4d
Near complete rewrite of the MII layer to present an interface compatible
...
with BSDI's MII layer to device drivers.
1998-08-10 23:55:16 +00:00
8fd79afcf8
Add machine identifier for ARM. Add (commented out) real ident
...
for Alpha as well.
1998-08-10 22:20:18 +00:00
8ba8e2056b
Remove unused field (sc_ih) in ess_softc (interrupt handlers are kept
...
in a per-direction structure).
1998-08-10 20:24:26 +00:00
f8dd65f3f5
Fix ommision in last backout.
1998-08-10 20:23:50 +00:00
b034eb97bf
Fix typo.
1998-08-10 20:02:48 +00:00
c81476c89d
ISDN Blaster / Master: ZBus attachment / SUPIO driver.
1998-08-10 18:53:31 +00:00
e5439fc15b
Back out last change --- it doesn't work this way
1998-08-10 18:43:06 +00:00
345530343a
Responding to an issue brought to my attention- when the device is
...
opened norewind and 2 filemarks are written at the end a phantom file
is left (just what I was afraid of, but I didn't think about it in
the last delta because somehow I had managed to convince myself that
this was a nonissue. It's not.).
So- in stdone clear ST_WRITTEN for regular reads. In st_close, preserve
the state of ST_WRITTEN, and if no error and 2FM@EOD for this device and
this is a no-rewind open, backspace one filemark. This should preserve
(for this mount session) FILE - FMK - FILE - FMK - FILE ... FILE FMK FMK EOD
sequencing.
This doesn't clean up the case of EOM appends- in this case you *will* still
get (after an MTEOM operation and a write of a file) a phantom empty file,
e.g. FILE - FMK FMK - FILE - FMK FMK EOD *unless* you follow the EOM operation
with an explicit backspace. The trouble is that this makes it difficult for
seamless interchange with other systems which don't necessarily follow.
The preferrable alternative would be to eliminate the 2FM@EOD except for
1/2" Reel tapes, but that has been pretty much nixed within developers.
1998-08-10 16:56:25 +00:00
7fca135b1b
Use the new trigger interface.
1998-08-10 15:32:18 +00:00
0a1a20bd29
Recognise STRH, STRSH and STRSB instructions as store instructions when
...
determining page protections for [u]vm_fault(). Fixes bug spotted by
Richard Earnshaw.
1998-08-10 15:15:49 +00:00
9f13823e62
Support for VS4000/60. Some needs-count -> needs-flag.
1998-08-10 14:48:53 +00:00
c355f4a0ed
Support for VS4000/60.
1998-08-10 14:47:16 +00:00
2ff84b0fe4
Kickoff xmit interrupts, needed on chip DC7201.
1998-08-10 14:41:16 +00:00
972b94efc4
Basic support for VS4000/60.
1998-08-10 14:31:07 +00:00
920e7c7d5d
Fix a race involving determination of pollmode. This is not known to be
...
associated with any observed lossage...it was just noticed while reading
ncr_start().
g/c some now-unreachable code produced by the earlier race condition fix.
1998-08-10 13:10:33 +00:00
574106c52b
create miscfs/genfs/genfs_vnops.c:genfs_enoioctl and make all the other
...
filesystems use it instead of a private version.
1998-08-10 08:11:10 +00:00
060f81eb62
Minor change.
1998-08-10 02:19:18 +00:00
93703857ca
Slow down, Wilbur.
1998-08-10 02:13:44 +00:00
7514d511f7
Fix a typo I introduced in the MIDI code.
1998-08-10 02:12:30 +00:00
86fe068843
Add ess at isapnp.
1998-08-10 01:54:59 +00:00
1c6dea16fa
For consistency, only do the rate coupling in full-duplex mode.
1998-08-10 01:27:34 +00:00
8d77cae1b4
For models prior to the SB16, there is only one clock divider, so couple the
...
sample rates. However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
20ec08b84e
Oops.
1998-08-10 01:17:33 +00:00
10148394d2
Call set_params if usemode changes.
1998-08-10 01:13:20 +00:00
3dcff6581b
Use the new trigger_{in,out}put interface.
...
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block. This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
ca7ad3aff1
make this compile in a not SUN4M world.
1998-08-09 23:37:12 +00:00
2c8717021d
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 22:36:37 +00:00
878203d616
Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3".
1998-08-09 22:25:18 +00:00
cf7abcbe64
Minor cleanup to debugging cruft.
1998-08-09 22:11:48 +00:00
98f1a01dec
Actually probe the hardware.
...
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
1998-08-09 22:08:40 +00:00
e6886047c9
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 21:58:52 +00:00
592b1dd587
But seriously...
1998-08-09 21:41:45 +00:00
a85ed63924
Oops; the previous was wrong on little-endian machines.
1998-08-09 21:35:03 +00:00
4522c799a1
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:51:08 +00:00
e1601dc2ca
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:36:58 +00:00
4ffebebb25
Several things:
...
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
1998-08-09 20:32:34 +00:00
17431823fb
Add trigger_output and trigger_input entry points, which replace
...
init_{in,out}put and start_{in,out}put, and are only called once.
1998-08-09 20:28:07 +00:00
27ca6798df
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:15:38 +00:00
8cbcfa0df2
Add mulaw_to_slinear16 and alaw_to_slinear16.
1998-08-09 19:22:15 +00:00
b1bb9aa490
Oops. We do still need to set t_dev in the first open part of zsopen,
...
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
64e4a1fa7d
Support video interrupt for GrandVimage 17iL video card.
1998-08-09 18:19:09 +00:00
e9ef31ed72
msdosfs -> adosfs
1998-08-09 17:54:50 +00:00
b872f9b8e7
avoid lint error.
1998-08-09 12:47:27 +00:00
4a75265273
defopt PFIL_HOOKS.
1998-08-09 08:58:18 +00:00
a2fc689833
Make sure output is thoroughly halted on close, and remember that we stopped
...
it.
1998-08-09 07:25:58 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
26e55969e4
Initialize the struct tty's t_dev field at attach rather than first open.
...
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
9bedf069cd
Mask off extra usemode bits.
1998-08-09 05:44:51 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
b3853549b3
Always copy back both the record and play parameters, in case the driver had
...
to change one behind our back.
1998-08-09 04:54:44 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
5d236ade07
minr KNF nit ..
1998-08-09 03:16:23 +00:00
fe3c14b64d
use __sparc__ not sparc
1998-08-09 03:12:39 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
093a8daf6b
Go to splhigh in the debugger.
1998-08-09 00:00:57 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
7795559d04
Use splaudio on the arm32 port.
1998-08-08 23:40:03 +00:00
d5eb56b2c2
Move splclock and splaudio outside splimp.
1998-08-08 23:39:38 +00:00
f996a2e194
Define IFM_INST_MAX, the largest possible "instance" value.
1998-08-08 22:12:30 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
09502c9fb2
Fix -Werror compilation failure due to lack of a couple of 'const's.
1998-08-08 20:57:55 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
88191aeeee
Reduce this file as done in the Alpha RAMDISK configuration, which makes
...
keeping it in sync less prone to errors.
1998-08-08 12:59:43 +00:00
4d9c340f85
Pathconf: for V2 mounts, revert back to failing with EINVAL if an RPC would
...
be necessary to obtain the information, as this fits the pathconf semantics
of `no association supported' better than `no limit available.'
1998-08-08 11:39:20 +00:00
8fdb1c8ebe
Lots of kernlib functions rewritten as inline macros.
1998-08-08 11:18:32 +00:00
94e9a8651a
Forgotten to commit this in last change.
1998-08-08 11:00:33 +00:00
815f9f2445
1. Untangle preprocessor conditionals for sanity and {} balance
...
2. Fix a race between the first callout and the first non-polled ncr_start()
1998-08-08 00:14:08 +00:00
86233eeede
Regen again, to indicate which master revision these were generated from.
1998-08-07 17:21:35 +00:00
a6b5ab0c92
Moved parioctl.h to the system header directory.
1998-08-07 16:16:36 +00:00
4c4cdda003
Switched to MI zs driver.
1998-08-07 11:19:13 +00:00
e081a838b5
Add client pathconf support.
1998-08-07 11:02:39 +00:00
dabc8eb436
Implement the 'i' flag which makes the bootloader ask for the file to
...
load (as in OSF/1).
Useful for netboot where "-file" doesn't work as needed.
1998-08-07 10:38:37 +00:00
49637cda8d
use an md keyboard beep replacement function on alpha too
1998-08-07 10:28:36 +00:00
e8564df3b9
implemt a simple "beep" device to access the ISA speaker
1998-08-07 10:26:38 +00:00
026fbbe2db
Match PCI-ISA bridges on class/subclass instead of vendor/device.
...
2 reasons:
-no need to keep a list of all known parts
-there is at least 1 bridge (ACC micro 2051) which reports the same
device ID for its various subfunctions; this would require an additional
check in the match function
(keep the old list inside #if 0 in case one of the historical bridges
doesn't report the right class/subclass - I can't check them all)
1998-08-07 10:15:32 +00:00
9bb616c621
Regen.
1998-08-07 06:59:31 +00:00
88c6239026
Add product IDs for the 3Com Cyclone-based PCI Ethernet devices,
...
the 3c90xB DMA-only cards.
1998-08-07 06:58:57 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
202c97c54d
Add an isapnp frontend for the ess driver. It somewhat works
...
(sounds is made but one buffer is played continuously).
1998-08-07 00:53:23 +00:00
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
51bb504a6e
Report a sensible MIDI device name.
1998-08-07 00:28:20 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
741d372539
Like for NFSv2, add a pointer to the NFSv3 RFC, too.
1998-08-06 19:44:28 +00:00
ddb9746a51
Define the minimum and maximum "network type" values. These values are
...
incremented by the minimum to interate through them.
1998-08-06 19:16:37 +00:00
d082dd3db4
Moved grfioctl.h and iteioctl.h to the public include directory.
1998-08-06 14:08:53 +00:00
02c9ad1755
And fix pastos.
1998-08-06 12:26:51 +00:00
a79bb0d7ae
Fix tyop.
1998-08-06 12:23:39 +00:00
546365a27e
_POSIX_SOURCE -> _POSIX_C_SOURCE
1998-08-06 11:25:04 +00:00
709dda58f8
_POSIX_SOURCE -> _POSIX_C_SOURCE, and add missing protection bits.
1998-08-06 11:22:57 +00:00
e2a2525203
fix incorrect length of LOCATE CDB (reported in PR kern/5306 by
...
Dave Huang <khym@bga.com>)
1998-08-06 10:20:38 +00:00
62cff0207c
comment out the prototypes for bcopy, ovbcopy, bzero, and bcmp.
...
uncomment macros transforming into memcpy, memmove, memset and memcmp.
the prototypes should be deleted from the file some time soon.
1998-08-06 04:50:14 +00:00
b84f472652
Sigh. "consts in prototypes can be quite a drag..."
...
fix last two fixes one more time, this time dealing with ugly
prototype issues, including the fact that the bcopy returns nothing,
but memcpy returns a void *. Never mind that we don't use it...
1998-08-06 04:37:57 +00:00
9f63941cfa
Fix botched prototype decl in last fix.
1998-08-06 04:25:55 +00:00
df410f33db
Convert bcopy,bzero to memcpy,memset
...
This was semi-nontrivial, since a function pointer to bcopy gets used
in this file.
Note #1 : The catchpacket routine, which takes a function pointer to
bpf_mcpy or memcpy, should probably be converted to take a
flag that just says which is used, so memcpy can be inlined.
Note #2 : The code is heavily #ifdef'ed to run on older operating
systems. We probably want to clean that cruft out, unless
someone is planning a new release of the code at LBL (doubtful.)
1998-08-06 04:24:25 +00:00
7ba85a8779
if syscall_debug & compat_sunos, include sunos_syscalls.c
1998-08-06 02:58:44 +00:00
dd588c0660
Add a macro to create a media word from type, subtype, options, and instance.
1998-08-06 02:38:19 +00:00
b04ded7264
Completely rewrite the way media descriptions are represented. The same
...
data structure is used, but a much saner matching mechanism is used, one
which allows greater ease in adding new types.
1998-08-06 02:19:34 +00:00
e2a897639d
KNF (only include one of <sys/{param,types}.h>).
1998-08-05 16:50:39 +00:00
0c6791d804
Add macro to test iobase validity.
1998-08-05 16:40:22 +00:00
28e2d6024a
Clarify a comment.
1998-08-05 16:38:09 +00:00
d8582601c5
Make panic message a little more explicit.
1998-08-05 16:34:36 +00:00
32fce55082
Improve generation of default disklabels:
...
-store printable product ID in cd's and sd's softc, use it as "typename"
-for this, add a "destination buffer length" argument to scsipi_strvis()
-return ATAPI device type for ATAPI devices
1998-08-05 16:29:04 +00:00
4df8f47ebc
Switched to MI zs driver.
1998-08-05 16:08:33 +00:00
e8551dcab3
Fixed stray pointer access reported by Yasufumi Itoh.
1998-08-05 15:57:43 +00:00
89f91f85fa
Fixed typo.
1998-08-05 14:40:20 +00:00
a0aeff98c4
Fix two pastos.
1998-08-05 10:16:25 +00:00
c3579ce3f5
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-05 02:45:08 +00:00
54f97ab9d1
bzero->memset, bcopy->memcpy
1998-08-05 02:28:26 +00:00
584757c02b
bzero->memset
1998-08-05 02:11:00 +00:00
bf0943278c
Fix a problem first noticed by a user with a screwed up real time
...
clock past the End of Time.
If time_t is 32 bits, then the "End of Time" is Jan 18/19 2038
(depending on time zone).
This code copes with RTC's past the end of time if time_t is an int32
or less. It just forces the time back to 2037. This will let users
with screwed up clocks to at least boot and function long enough to
set their clocks to something sane.
This kludge is conditioned on an
if (sizeof(time_t) <= sizeof(int32_t))
which will automatically optimize the code out once we switch time_t
to a 64 bit quantity, which should happen well before 2037.
Patch based on code from Michael C. Richardson, with help from
Allen Briggs who pointed out a fencepost error.
1998-08-05 01:21:54 +00:00
f15ade7552
enable nanosleep in linux emul, per pr-5906 from Soren S. Jorvang
1998-08-05 00:44:32 +00:00
9186d2da5c
Simple instrumentation of pmap_steal_memory().
1998-08-04 22:40:17 +00:00
71c8693225
Add missing "-a" to mkdep line for pmax locore_machdep.S.
...
From Noriyuki Soda.
1998-08-04 20:17:09 +00:00
25997dd19d
IPL_TTY -> IPL_SERIAL.
1998-08-04 20:09:37 +00:00
7b07ad780a
Per XNS Issue 5, calling recvmsg(2) or sendmsg(2) with an msg.msg_iovlen less
...
than or equal to 0 shall fail with EMSGSIZE; the latter condition was not being
checked for. Also, document the msg.msg_iovlen > {IOV_MAX} case.
1998-08-04 19:48:34 +00:00
b6ffd3a85e
Don't call cpu_tlb_flushID() from the pmap_update macro.
1998-08-04 19:11:29 +00:00
e9545cf241
Fixed memory probe for color turbo machines.
1998-08-04 19:08:23 +00:00
167a777474
Drop in the lastest round of optimisations from Neil Carson.
...
The cache cleaning code in pmap_copy_page() and pmap_zero_page()
has been rewritten and uses a new function pmap_clean_page().
pmap_remove() has been completely rewritten to make it more efficient
when there are only a few pages that actually need to be removed.
1998-08-04 19:02:19 +00:00
b72d8d17f9
__BROKEN_INDIRECT_CONFIG fixes.
1998-08-04 16:51:51 +00:00
ea7f1dbe36
Some files were not deleted with make clean.
...
Keymap files are now installed in /usr/share/keymaps/x68k.
1998-08-04 16:39:55 +00:00
47ac4421e0
In setregs(), only pass the stack value in r12 if COMPAT_1[123] is defined.
1998-08-04 16:25:28 +00:00
4b14908352
Fix the validation of source addresses in db_read_bytes() so that
...
memory ranges mapped with L1 section mappings do not cause aborts
due to lack of L2 page table.
1998-08-04 16:19:54 +00:00
e9c872cd6b
Define a macro L1_MASK to mask out the level 1 pde type bits.
1998-08-04 16:16:22 +00:00
aced90770c
Message fixes.
1998-08-04 16:10:45 +00:00
233cd5d60b
RB_POWERDOWN is now supported.
...
Check if the power switch is open (off) in the shutdown_hook,
and try removing the power in cpu_reboot.
poffd default action is now shutdown -p.
1998-08-04 16:07:53 +00:00
f76fb48283
Use looping DMA for play channel.
...
More cleanup.
1998-08-04 13:14:42 +00:00
c6ef57702d
UIO_MAXIOV -> IOV_MAX
1998-08-04 12:19:15 +00:00
5b057ab09f
Allow option AUDIO_INTR_TIME even if the platform does not support
...
FP in the kernel.
1998-08-04 11:26:14 +00:00
3dc1e8147c
Kill "options FIFO" - they're mandatory now.
1998-08-04 11:19:02 +00:00
242ff31b91
update bzero.c to stub from libc/string
1998-08-04 06:27:08 +00:00
974739923b
replace several special targets with stub .c files, as in libc/string
1998-08-04 05:01:58 +00:00
275d1554aa
Abolition of bcopy, ovbcopy, bcmp, and bzero, phase one.
...
bcopy(x, y, z) -> memcpy(y, x, z)
ovbcopy(x, y, z) -> memmove(y, x, z)
bcmp(x, y, z) -> memcmp(x, y, z)
bzero(x, y) -> memset(x, 0, y)
1998-08-04 04:03:10 +00:00
4d4aa090e9
add memcmp.c
1998-08-04 03:40:43 +00:00
16039920c8
remove memcpy.c -- I forgot this gets built anyway
1998-08-04 03:40:12 +00:00
612c53d05f
add memcmp.c
1998-08-04 03:39:49 +00:00
0b8f8ffda2
remove memmove.c -- I forgot this gets built anyway
1998-08-04 03:38:28 +00:00
58af7a969a
add memcmp.c memcpy.c memmove.c
1998-08-04 03:37:03 +00:00
a611b37e29
add memcmp.S memmove.S
1998-08-04 03:35:59 +00:00
6ee9cbf929
add memcmp.S memmove.S
1998-08-04 03:30:30 +00:00
5ede68eddb
add memcmp.c memmove.S
1998-08-04 03:17:39 +00:00
e0f41ebe62
add memmove.S
1998-08-04 03:16:19 +00:00
d91830b032
Namespace cleanup. Prefix all the JMPBUF* macros with _JB.
1998-08-04 02:01:17 +00:00
542f66b672
add memmove.S
1998-08-04 01:41:26 +00:00
6ea886d397
add memcmp.S
1998-08-04 01:40:57 +00:00
a8627d22ba
Fix formatting, and add memmove.S
1998-08-04 01:14:36 +00:00
534fb67f27
fix silly comment typo
1998-08-03 20:32:48 +00:00
3d9b4a4320
Fix two off-by-one bugs, both present in each recvmsg(2) and sendmsg(2):
...
* the first one would cause an unnecessary malloc() of iovec storage for
a msg_iovlen of UIO_SMALLIOV although the required amount of memory has
been allocated on the stack.
* the second one would cause a recvmsg() or sendmsg() with a msg_iovlen of
UIO_MAXIOV to fail with EMSGSIZE, which is also a violation of XNS5.
1998-08-03 15:15:58 +00:00
c68582d64b
UIO_MAXIOV -> IOV_MAX
1998-08-03 15:01:00 +00:00
5404ba4886
Add support to query the
...
* availability of POSIX Synchronized I/O (kern.synchronized_io),
* maximum number of iovec structures to be used in readv(2) etc. (kern.iov_max)
via sysctl().
1998-08-03 14:38:20 +00:00
93897b8303
Per XSH5, define IOV_MAX which is provided via <limits.h>, and declare
...
UIO_MAXIOV deprecated.
1998-08-03 14:27:50 +00:00
af261318d9
Now that we have it, add a conversion for _PC_SYNC_IO.
1998-08-03 14:23:30 +00:00
12a866151b
Recognize _PC_SYNC_IO.
1998-08-03 14:19:57 +00:00
d2753d235a
Add _POSIX_SYNCHRONIZED_IO, _SC_SYNCHRONIZED_IO, _SC_IOV_MAX and _PC_SYNC_IO.
...
Fix a typo.
1998-08-03 14:16:04 +00:00
5429ccda94
Pass the dma_tag to _bus_dmamap_load_buffer.
1998-08-03 13:09:01 +00:00
1b58f59205
Add IFM_10_FL - 10baseFL (fiber)
1998-08-03 12:42:26 +00:00
ac2b25e392
Improve some error messages.
...
Make some preparations for isochronous transfers.
1998-08-02 22:30:52 +00:00
607075abc6
Use wskbd enable function.
1998-08-02 22:27:01 +00:00
70fe6c76a1
Pass ps_strings in r0 when execing processes.
...
Use macros rather than absolute values in zero_page_read*() functions.
1998-08-02 21:50:31 +00:00
005ae749a7
Oops, make a sentence added in previous commit parseable.
1998-08-02 19:42:35 +00:00
e719e2f606
Bump version to 1.3G:
...
- mbuf interface change from poolification (removal of m_clalloc).
- vnode IO_SYNC/IO_DSYNC interface change.
1998-08-02 19:19:11 +00:00
85b7cfc8c3
Make sure we initialize pr_nidle.
1998-08-02 19:07:47 +00:00
933111f98f
Implement support for IEEE Std 1003.1b-1993 synchronous I/O:
...
* in the read vnode operator, check for IO_SYNC being set in the ioflag and
synchronously update the file's meta-data if appropriate.
* in the write vnode operator, update the appropriate checks for IO_SYNC being
set in the ioflag to reflect that IO_DSYNC is now inclusive-or'ed into
IO_SYNC, and require all IO_SYNC bits to be set for operations defined by
synchronized I/O file integrity completion but not by synchronized I/O data
integrity completion.
1998-08-02 18:57:23 +00:00
b7877d3fc0
Implement support for IEEE Std 1003.1b-1993 syncronous I/O:
...
* if synchronized I/O file integrity completion of read operations was
requested, set IO_SYNC in the ioflag passed to the read vnode operator.
* if synchronized I/O data integrity completion of write operations was
requested, set IO_DSYNC in the ioflag passed to the write vnode operator.
1998-08-02 18:39:14 +00:00
d8b09acbf7
Per IEEE Std 1003.1b-1993, Synchronous I/O Option, add O_DSYNC (synchronized
...
I/O data integrity completion) and O_RSYNC (complete read operations at the
same level of integrity requested for write operations).
1998-08-02 18:31:09 +00:00
5e466df173
Add a new I/O flag, IO_DSYNC, which requests the operation do to synchronized
...
I/O data integrity completion and change IO_SYNC (synchronized I/O file
integrity completion) do inclusive-or it, since it's a superset of the former.
1998-08-02 18:26:30 +00:00
6ee9772e54
Fix PR5898: ppp delays last packet.
1998-08-02 15:09:50 +00:00
0dc548ce7d
Adapt to wskbd interface changes; add dummy enable/disable function.
1998-08-02 14:22:25 +00:00
86b0985e69
Adapt to wskbd interface changes; implement enable/disable function.
...
Disable the keyboard on attach if not console.
1998-08-02 14:21:02 +00:00
4ee71fe4f4
Split the wskbd_attach arguments into console and autoconfiguration parts
...
(again); put some constant data into shared structures. This makes it
more look like the mouse part, and it helps USB integration.
Implement wskbd_enable() to enable/disable the keyboard.
1998-08-02 14:18:07 +00:00
a4c7bab10e
Use the pool allocator for sockets.
1998-08-02 04:53:11 +00:00
0e28b643e9
Use a pool for proc structures.
1998-08-02 04:41:32 +00:00
6f739e1a66
Fix a braino in the idle page instrumentation.
1998-08-02 04:34:46 +00:00
833061914a
Use the pool allocator for tcpcbs.
1998-08-02 00:36:19 +00:00
d319e4b419
Use the pool allocator for syn_cache entries.
1998-08-02 00:35:51 +00:00
47e9dcf841
Use the pool allocator for inpcbs.
1998-08-02 00:35:31 +00:00
7c61b8cdd8
Instrument "idle pages" (i.e. pages which have no items allocated from
...
them, and could thus be freed back to the system).
1998-08-01 23:44:20 +00:00
bf8f319d0e
Remove some lint.
1998-08-01 21:12:32 +00:00
eba74b9369
Abort interrupt pipe on disconnect.
1998-08-01 20:52:45 +00:00
8eeb95fce4
Implement pci_intr_disestablish().
1998-08-01 20:25:12 +00:00
6aff95b06c
Make sure to abort the interrupt pipe on disconnect of a mouse or keyboard.
...
Improve some error messages.
1998-08-01 20:11:38 +00:00
92fa3a68ad
In sio_intr_disestablish, also make sure that IRQs 0, 1, 8, and 13
...
default to edge-triggered, just like in the setup.
1998-08-01 19:38:29 +00:00
0b60fda7c8
Implement sio_intr_disestablish(), and ensure that an initially-enabled
...
interrupt is never disabled and an initially-level-triggered interrupt
never becomes untyped.
1998-08-01 18:54:21 +00:00
528dab6808
Implement alpha_shared_intr_disestablish(). Simply removes the handler
...
fromthe list, allowing the caller to manipulate the sharing type,
if appropriate.
1998-08-01 18:52:36 +00:00
f654e0188e
Switch from a global flag to tell if the host controller should use
...
polling to a local one for each controller.
1998-08-01 18:16:19 +00:00
5a1f4dd6bc
Complete the scancode conversion table.
...
Tell the keyboard not to send idle reports.
1998-08-01 17:46:22 +00:00
aec399e36f
Changes to keep lint happy.
...
In particular, fix some Makefiles so the include
paths are passed to lint.
1998-08-01 11:22:51 +00:00
3c658f1f41
Don't call the protocol drain routines if how == M_NOWAIT, which typically
...
means we're in interrupt context. Since we can be called from a network
hardware interrupt, we could corrupt the protocol queues we try to drain
them at that time.
1998-08-01 01:47:24 +00:00
45d17e02f7
We need to be able to specify a uvm_object to the pool page allocator, too.
1998-08-01 01:39:03 +00:00
c56c24f4fd
Initialize the mbuf allocator _before_ autoconfiguration; it might be
...
called when devices attach, take two.
Note that it is necessary that mbinit() NOT allocate memory, since it
is called before mb_map is created. This is not a problem with the
pool allocator that is now used for mbufs and mbuf clusters.
1998-08-01 01:36:35 +00:00
e7521693c1
Use the pool allocator for mbufs and mbufs clusters (two pools, one for
...
each). Partially from pk@netbsd.org .
1998-08-01 01:35:20 +00:00
e8b92fa131
Oops, back out previous. I need to attack that problem differently.
1998-08-01 01:20:43 +00:00
ce69d417a2
Make it compile without DIAGNOSTIC
1998-07-31 23:54:09 +00:00
2b8a659f68
make libkern build memmove() properly
1998-07-31 23:44:41 +00:00
730baa7431
fix sizeofs so they comply with the KNF style guide. yes, it is pedantic.
1998-07-31 22:50:48 +00:00
6c727e1651
dvma_malloc(), dvma_mapin() and dvma_mapout() are gone; all drivers
...
the use bus_dma(9) interface now.
1998-07-31 22:35:07 +00:00
359cf8c23d
Move `dvma_cachealign' here from vm_machdep.c
1998-07-31 22:23:30 +00:00
a0818b4b8b
Use bus_dmamem_alloc/bus_dmamem_map.
1998-07-31 22:21:35 +00:00
17e88cf50e
Initialize the mbuf allocator _before_ autoconfiguration; it might be
...
called when devices attach.
1998-07-31 21:59:55 +00:00
fe7696eacb
Un-static pool_head; vmstat wants to find it.
1998-07-31 21:55:09 +00:00
55bf1fd9ad
Allow an alternate splimp-protected map to be specified in the pool page
...
allocator routines.
1998-07-31 20:46:36 +00:00
6e34b79e01
Suggestion from Matthias Drochner: If at close you decide to write
...
filemark 'coz you opened write only and didn't do anything else,
call st_check_eod to possibly write TWO furshlugginer filemarks.
Also- return any errors from writing filemarks out of stclose.
1998-07-31 17:25:55 +00:00
0869d8f714
Blargh, deal with some fallout from the ISA PnP goo, this will go away once
...
we can pull in files.isa properly.
1998-07-31 16:42:01 +00:00
519f1f7f0e
Convert to bus dma.
1998-07-31 15:53:11 +00:00
17de9df6c1
Reject an iovcnt argument of 0 to readv(), writev(), preadv() and pwritev()
...
as invalid. This has been stated by the respective manual pages at least
since Net/2, and is the behaviour specified by XSH5.
1998-07-31 15:38:58 +00:00
22554e01a9
Following discussions with eeh and mrg, change most of these types so
...
that they should make an ILP32 setup with an ILP32 compiler and an LP64
setup if run through an LP64 compiler. None of the data sizes actually
change right now, and any type errors that show up would have to be fixed
eventually anyway.
1998-07-31 15:30:40 +00:00
6b407a79c6
Major cleanup of the ESS driver. It now sorta works. More to come.
1998-07-31 15:17:17 +00:00
a24dbc8065
(Always) (practice) (safe) (macro expansion).
1998-07-31 15:07:41 +00:00
c206cad36e
Convert to bus_dma.
1998-07-31 12:45:48 +00:00
53878c1925
Change one word to be consistent w/ a previous message.
1998-07-31 05:37:02 +00:00
99d64ae1ca
Oops, unused variable.
1998-07-31 05:29:48 +00:00
4ea9132164
Rearrange isapnp_callback() slightly.
1998-07-31 05:28:24 +00:00
c489673819
Ensure we're probed only once per ISA bus.
1998-07-31 05:26:15 +00:00
06761b1ed4
Merge in a register definition mentioned only in passing in one place in
...
the Zilog docs.
1998-07-31 05:08:38 +00:00
6ec566abd2
Add BeBox support.
1998-07-31 04:56:55 +00:00
46c7e2fa53
ISA PnP goo.
1998-07-31 04:55:30 +00:00
2e33e4c2fa
First-cut support for ISA PnP for NetBSD/bebox.
1998-07-31 04:54:38 +00:00
c46ad7a0cc
Add NetBSD/arm32 support.
1998-07-31 04:50:54 +00:00
29ad6dac50
ISA PnP goo.
1998-07-31 04:50:01 +00:00
6f3b1afe37
First-cut ISA PnP support for NetBSD/arm32.
1998-07-31 04:48:42 +00:00
171cebde9c
Actually add support for the Atari.
1998-07-31 04:45:01 +00:00
92d42c0871
Add a comment about why we can (and must) use bus_space_{,un}map() directly
...
in this file.
1998-07-31 04:44:10 +00:00
75db93cec2
Pull in files.isapnp here; the two busses are linked together quite closely
...
(more than we'd like maybe, but don't we wish ISA didn't suck...)
1998-07-31 04:40:39 +00:00
a138b68143
Don't include files.isapnp here.
1998-07-31 04:39:23 +00:00
9589268364
Add unused zskbd and zsms entries, and ISA PnP entry.
1998-07-31 04:38:51 +00:00
e2ce6c8a28
Machine-dependent ISA PnP goo for NetBSD/alpha.
1998-07-31 04:38:04 +00:00
f948e430bb
Provide a hook for bypassing space accounting, needed to support ISA PnP
...
for now.
1998-07-31 04:37:02 +00:00
54de49fcb9
Add support for NetBSD/alpha.
1998-07-31 04:35:22 +00:00
f40a42d5c4
Use config_defer() to scan for ISA PnP cards.
1998-07-31 04:00:35 +00:00
b90b2a3798
Several more changes. First of all, move CTRL_MODE to have I/O behaviour
...
like a no-rewind device. Secondly figure out whether the initial TUR
for a CTRL_MODE open resulted in a tape being actually found (if so,
then do a mount session).
Move the 'sun compatibility' behaviour into stdone && stclose- don't
mark a tape as having been written in stopenm, fer gosh sakes.
1998-07-31 04:00:22 +00:00
03ffe0a516
Use the pool allocator for scsipi_xfer structures.
1998-07-31 03:00:51 +00:00
310dc86986
Add PR_NOWAIT (0) for symmetry.
1998-07-31 02:53:34 +00:00
6056af462f
Use the pool allocator for vndxfer and vndbuf structures.
1998-07-31 02:24:26 +00:00
dcfe0e1506
Back out part of previous; it is perfectly reasonable, and desirable, to
...
print out debugging info ifdef DEBUG.
1998-07-31 02:14:40 +00:00
ecf815f930
Back out previous; it is perfectly reasonable, and desirable, to print out
...
debugging info ifdef DEBUG.
1998-07-31 02:10:12 +00:00
bec14b0ce3
Part A (Cosmetic nonsense):
...
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
1998-07-31 02:08:16 +00:00
thorpej