Adapt to the new MII layer. This PHY driver now properly supports

802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.

XXX There is still some work to do wrt. autonegotiation and the
BNC/AUI support in the ThunderLAN PHY.
This commit is contained in:
thorpej 1998-08-10 23:59:58 +00:00
parent f66f3b1ba9
commit 045a100420
3 changed files with 430 additions and 158 deletions

View File

@ -1,5 +1,42 @@
/* $NetBSD: tlphy.c,v 1.6 1998/06/09 07:30:44 thorpej Exp $ */
/* $NetBSD: tlphy.c,v 1.7 1998/08/10 23:59:58 thorpej Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
*
@ -29,49 +66,75 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* Driver for Texas Instruments's ThunderLAN internal PHY */
/*
* Driver for Texas Instruments's ThunderLAN PHYs
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/socket.h>
#include <machine/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <net/if_ether.h>
#include <dev/mii/mii_adapter.h>
#include <dev/mii/mii_adapters_id.h>
#include <dev/mii/mii_phy.h>
#include <dev/mii/generic_phy.h>
#include <dev/mii/tlphy.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/miidevs.h>
static int tlphy_up __P((struct phy_softc *sc));
void tlphy_pdown __P((void *v));
int tlphy_media_set __P((int, void *));
int tlphy_media_set_aui __P((struct phy_softc *));
int tlphy_status __P((int, void*));
#include <dev/i2c/i2c_bus.h>
#include <dev/mii/tlphyreg.h>
#include <dev/mii/tlphyvar.h>
/* ThunderLAN PHY can only be on a ThunderLAN */
#include <dev/pci/if_tlvar.h>
struct tlphy_softc {
struct mii_softc sc_mii; /* generic PHY */
int sc_capabilities;
int sc_ticks;
int sc_tlphycap;
int sc_active;
};
int tlphymatch __P((struct device *, struct cfdata *, void *));
void tlphyattach __P((struct device *, struct device *, void *));
struct cfattach tlphy_ca = {
sizeof(struct phy_softc), tlphymatch, tlphyattach
sizeof(struct tlphy_softc), tlphymatch, tlphyattach
};
#define TLPHY_READ(sc, reg) \
(*(sc)->sc_mii.mii_pdata->mii_readreg)((sc)->sc_mii.mii_dev.dv_parent, \
(sc)->sc_mii.mii_phy, (reg))
#define TLPHY_WRITE(sc, reg, val) \
(*(sc)->sc_mii.mii_pdata->mii_writereg)((sc)->sc_mii.mii_dev.dv_parent, \
(sc)->sc_mii.mii_phy, (reg), (val))
int tlphy_service __P((struct mii_softc *, struct mii_data *, int));
void tlphy_reset __P((struct tlphy_softc *));
void tlphy_auto __P((struct tlphy_softc *));
void tlphy_status __P((struct tlphy_softc *));
int
tlphymatch(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
mii_phy_t *phy = aux;
struct mii_attach_args *ma = aux;
if (phy->phy_id == 0x40005013 || phy->phy_id == 0x40005014 ||
phy->phy_id == 0x40005015)
if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_TI &&
MII_MODEL(ma->mii_id2) == MII_MODEL_TI_TLAN10T)
return (1);
return (0);
}
@ -80,150 +143,293 @@ tlphyattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct phy_softc *sc = (struct phy_softc *)self;
struct tlphy_softc *sc = (struct tlphy_softc *)self;
struct tl_softc *tlsc = (struct tl_softc *)self->dv_parent;
struct mii_attach_args *ma = aux;
struct mii_data *mii = ma->mii_data;
const char *sep = "";
sc->phy_link = aux;
sc->phy_link->phy_softc = sc;
sc->phy_link->phy_media_set = tlphy_media_set;
sc->phy_link->phy_status = tlphy_status;
sc->phy_link->phy_pdown = tlphy_pdown;
printf(": %s, rev. %d\n", MII_STR_TI_TLAN10T,
MII_REV(ma->mii_id2));
phy_reset(sc);
sc->sc_mii.mii_inst = mii->mii_instance;
sc->sc_mii.mii_phy = ma->mii_phyno;
sc->sc_mii.mii_service = tlphy_service;
sc->sc_mii.mii_pdata = mii;
switch (sc->phy_link->adapter_id) {
case COMPAQ_INT_NETLIGENT_10_100:
sc->phy_link->phy_media = PHY_BNC;
break;
case COMPAQ_NETLIGENT_10_100:
sc->phy_link->phy_media = 0;
break;
case COMPAQ_INT_NETFLEX:
case COMPAQ_NETFLEX_BNC:
sc->phy_link->phy_media = PHY_BNC | PHY_10baseT;
break;
case TI_TLAN:
sc->phy_link->phy_media = PHY_10baseT;
break;
default:
sc->phy_link->phy_media = PHY_AUI;
if (phy_media_probe(sc) != 0) {
printf(" (autoconfig failed)");
break;
tlphy_reset(sc);
/*
* Note that if we're on a device that also supports 100baseTX,
* we are not going to want to use the built-in 10baseT port,
* since there will be another PHY on the MII wired up to the
* UTP connector. The parent indicates this to us by specifying
* the TLPHY_MEDIA_NO_10_T bit.
*/
sc->sc_tlphycap = tlsc->tl_product->tp_tlphymedia;
if ((sc->sc_tlphycap & TLPHY_MEDIA_NO_10_T) == 0)
sc->sc_capabilities =
TLPHY_READ(sc, MII_BMSR) & ma->mii_capmask;
else
sc->sc_capabilities = 0;
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->sc_mii.mii_inst),
BMCR_ISO);
if ((sc->sc_tlphycap & TLPHY_MEDIA_NO_10_T) == 0)
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_LOOP,
sc->sc_mii.mii_inst), BMCR_LOOP);
#define PRINT(s) printf("%s%s", sep, s); sep = ", "
printf("%s: ", sc->sc_mii.mii_dev.dv_xname);
if (sc->sc_tlphycap) {
if (sc->sc_tlphycap == TLPHY_MEDIA_10_2) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0,
sc->sc_mii.mii_inst), 0);
PRINT("10base2/BNC");
} else {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_5, 0,
sc->sc_mii.mii_inst), 0);
PRINT("10base5/AUI");
}
}
if (sc->phy_link->phy_media) {
printf(": ");
phy_media_print(sc->phy_link->phy_media);
}
if (sc->sc_capabilities & BMSR_MEDIAMASK) {
printf(sep);
mii_add_media(mii, sc->sc_capabilities, sc->sc_mii.mii_inst);
} else if (sc->sc_tlphycap == 0)
printf("no media present");
printf("\n");
#undef ADD
#undef PRINT
}
int
tlphy_service(self, mii, cmd)
struct mii_softc *self;
struct mii_data *mii;
int cmd;
{
struct tlphy_softc *sc = (struct tlphy_softc *)self;
int reg;
switch (cmd) {
case MII_POLLSTAT:
/*
* If we're not polling our PHY instance, just return.
*/
if (IFM_INST(mii->mii_media.ifm_media) !=
sc->sc_mii.mii_inst)
return (0);
break;
case MII_MEDIACHG:
/*
* If the media indicates a different PHY instance,
* isolate ourselves.
*/
if (IFM_INST(mii->mii_media.ifm_media) !=
sc->sc_mii.mii_inst) {
reg = TLPHY_READ(sc, MII_BMCR);
TLPHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
return (0);
}
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
switch (IFM_SUBTYPE(mii->mii_media.ifm_media)) {
case IFM_AUTO:
/*
* The ThunderLAN PHY doesn't self-configure after
* an autonegotiation cycle, so there's no such
* thing as "already in auto mode".
*/
tlphy_auto(sc);
break;
case IFM_10_2:
case IFM_10_5:
TLPHY_WRITE(sc, MII_BMCR, 0);
TLPHY_WRITE(sc, MII_TLPHY_CTRL, CTRL_AUISEL);
delay(100000);
break;
default:
TLPHY_WRITE(sc, MII_TLPHY_CTRL, 0);
delay(100000);
TLPHY_WRITE(sc, MII_ANAR,
mii_anar(mii->mii_media.ifm_media));
TLPHY_WRITE(sc, MII_BMCR,
mii->mii_media.ifm_cur->ifm_data);
}
break;
case MII_TICK:
/*
* If we're not currently selected, just return.
*/
if (IFM_INST(mii->mii_media.ifm_media) !=
sc->sc_mii.mii_inst)
return (0);
/*
* Only used for autonegotiation.
*/
if (IFM_SUBTYPE(mii->mii_media.ifm_media) != IFM_AUTO)
return (0);
/*
* Is the interface even up?
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return (0);
/*
* Check to see if we have link. If we do, we don't
* need to restart the autonegotiation process. Read
* the BMSR twice in case it's latched.
*
* XXX WHAT ABOUT CHECKING LINK ON THE BNC/AUI?!
*/
reg = TLPHY_READ(sc, MII_BMSR) | TLPHY_READ(sc, MII_BMSR);
if (reg & BMSR_LINK)
return (0);
/*
* Only retry autonegotiation every 5 seconds.
*/
if (++sc->sc_ticks != 5)
return (0);
sc->sc_ticks = 0;
tlphy_reset(sc);
tlphy_auto(sc);
break;
}
/* Update the media status. */
tlphy_status(sc);
/* Callback if something changed. */
if (sc->sc_active != mii->mii_media_active || cmd == MII_MEDIACHG) {
(*mii->mii_statchg)(sc->sc_mii.mii_dev.dv_parent);
sc->sc_active = mii->mii_media_active;
}
return (0);
}
void
tlphy_pdown(v)
void *v;
tlphy_status(sc)
struct tlphy_softc *sc;
{
struct phy_softc *sc = v;
mii_phy_t *phy_link = sc->phy_link;
struct mii_data *mii = sc->sc_mii.mii_pdata;
int bmsr, bmcr, tlctrl;
mii_writereg(phy_link->mii_softc, phy_link->dev, PHY_CONTROL,
CTRL_ISO | CTRL_PDOWN);
}
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
static int
tlphy_up(sc)
struct phy_softc *sc;
{
int s;
mii_phy_t *phy_link = sc->phy_link;
int control, i;
bmsr = TLPHY_READ(sc, MII_BMSR) | TLPHY_READ(sc, MII_BMSR);
if (bmsr & BMSR_LINK)
mii->mii_media_status |= IFM_ACTIVE;
s = splnet();
/* set control registers to a reasonable value, wait for power_up */
mii_writereg(phy_link->mii_softc, phy_link->dev, PHY_CONTROL,
CTRL_LOOPBK);
mii_writereg(phy_link->mii_softc, phy_link->dev, PHY_TL_CTRL, 0);
i = 0;
do {
DELAY(100000);
control = mii_readreg(phy_link->mii_softc, phy_link->dev,
PHY_TL_ST);
} while ((control < 0 || (control & TL_ST_PHOK) == 0) && ++i < 10);
if (control < 0 || (control & TL_ST_PHOK) == 0) {
splx(s);
printf("%s: power-up failed\n", sc->sc_dev.dv_xname);
return (0);
bmcr = TLPHY_READ(sc, MII_BMCR);
if (bmcr & BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (phy_reset(sc) == 0) {
splx(s);
return (0);
}
splx(s);
return (1);
}
int
tlphy_media_set(media, v)
int media;
void *v;
{
struct phy_softc *sc = v;
int subtype;
if (IFM_TYPE(media) != IFM_ETHER)
return (EINVAL);
if (tlphy_up(sc) == 0)
return (EIO);
subtype = IFM_SUBTYPE(media);
switch (subtype) {
case IFM_10_2:
case IFM_10_5:
if ((subtype == IFM_10_2 &&
(sc->phy_link->phy_media & PHY_BNC)) ||
(subtype == IFM_10_5 &&
(sc->phy_link->phy_media & PHY_AUI)))
return (tlphy_media_set_aui(sc));
tlctrl = TLPHY_READ(sc, MII_TLPHY_CTRL);
if (tlctrl & CTRL_AUISEL) {
if (sc->sc_tlphycap == TLPHY_MEDIA_10_2)
mii->mii_media_status |= IFM_10_2;
else
return (EINVAL);
case IFM_10_T:
return (phy_media_set_10_100(sc, media));
case IFM_AUTO:
return (ENODEV);
default:
return (EINVAL);
mii->mii_media_status |= IFM_10_5;
/* XXX Can we sense carrier here? */
mii->mii_media_status = 0;
return;
}
if (bmcr & BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
/*
* Grr, braindead ThunderLAN PHY doesn't have any way to
* tell which media is actually active. (Note it also
* doesn't self-configure after autonegotiation.) We
* just have to report what's in the BMCR.
*/
if (bmcr & BMCR_FDX)
mii->mii_media_active |= IFM_FDX;
mii->mii_media_active |= IFM_10_T;
}
int
tlphy_media_set_aui(sc)
struct phy_softc *sc;
void
tlphy_auto(sc)
struct tlphy_softc *sc;
{
mii_phy_t *phy_link = sc->phy_link;
int aner, anlpar, bmsr, i;
mii_writereg(phy_link->mii_softc, phy_link->dev,
PHY_CONTROL, 0);
mii_writereg(phy_link->mii_softc, phy_link->dev,
PHY_TL_CTRL, TL_CTRL_AUISEL);
DELAY(100000);
return (0);
TLPHY_WRITE(sc, MII_ANAR,
BMSR_MEDIA_TO_ANAR(sc->sc_capabilities) | ANAR_CSMA);
TLPHY_WRITE(sc, MII_BMCR, BMCR_AUTOEN | BMCR_STARTNEG);
/* Wait 500ms for it to complete. */
for (i = 0; i < 500; i++) {
if ((bmsr = TLPHY_READ(sc, MII_BMSR)) & BMSR_ACOMP)
return;
delay(1000);
}
if ((bmsr & BMSR_ACOMP) == 0) {
printf("%s: autonegotiation failed to complete\n",
sc->sc_mii.mii_dev.dv_xname);
return;
}
/*
* Grr, braindead ThunderLAN PHY doesn't self-configure
* after autonegotiation. We have to do it ourselves
* based on the link partner status.
*/
aner = TLPHY_READ(sc, MII_ANER);
if (aner & ANER_LPAN) {
anlpar = TLPHY_READ(sc, MII_ANLPAR) &
TLPHY_READ(sc, MII_ANAR);
if (anlpar & ANAR_10_FD) {
TLPHY_WRITE(sc, MII_BMCR, BMCR_FDX);
return;
}
}
/*
* Just assume we're not in full-duplex mode.
* XXX Check link and try AUI/BNC?
*/
TLPHY_WRITE(sc, MII_BMCR, 0);
}
int
tlphy_status(media, v)
int media;
void *v;
void
tlphy_reset(sc)
struct tlphy_softc *sc;
{
struct phy_softc *sc = v;
int reg;
if (IFM_SUBTYPE(media) == IFM_10_T)
return (phy_status(media, sc));
reg = mii_readreg(sc->phy_link->mii_softc, sc->phy_link->dev,
PHY_TL_ST);
if ((reg & PHY_TL_ST) == 0)
return (ENETDOWN);
return (0);
int reg, i;
TLPHY_WRITE(sc, MII_BMCR, BMCR_RESET|BMCR_ISO);
/* Wait 100ms for it to complete. */
for (i = 0; i < 100; i++) {
reg = TLPHY_READ(sc, MII_BMCR);
if ((reg & BMCR_RESET) == 0)
break;
delay(1000);
}
/* Make sure the PHY is isolated. */
if (sc->sc_mii.mii_inst != 0)
TLPHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
}

View File

@ -1,4 +1,4 @@
/* $NetBSD: tlphy.h,v 1.3 1997/11/17 09:08:26 thorpej Exp $ */
/* $NetBSD: tlphyreg.h,v 1.1 1998/08/10 23:59:58 thorpej Exp $ */
/*
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
@ -29,21 +29,29 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* control register */
# define CTRL_PDOWN 0x0800 /* power down */
#ifndef _DEV_MII_TLPHYREG_H_
#define _DEV_MII_TLPHYREG_H_
/* ThunderLAN specific registers */
#define PHY_TL_CTRL 0x11 /* Read/Write */
# define TL_CTRL_ILINK 0x8000 /* Ignore link */
# define TL_CTRL_SWPOL 0x4000 /* swap polarity */
# define TL_CTRL_AUISEL 0x2000 /* Select AUI */
# define TL_CTRL_SQEEN 0x1000 /* Enable SQE */
# define TL_CTRL_NFEW 0x0004 /* Not far end wrap */
# define TL_CTRL_INTEN 0x0002 /* Interrupts enable */
# define TL_CTRL_TINT 0x0001 /* Test Interrupts */
/*
* Registers for the TI ThunderLAN internal PHY.
*/
#define PHY_TL_ST 0x12 /* Read Only */
# define TL_ST_MII_Int 0x8000 /* MII interrupt */
# define TL_ST_PHOK 0x4000 /* Power higth OK */
# define TL_ST_PolOK 0x2000 /* Polarity OK */
# define TL_ST_TPE 0x1000 /* Twisted pair energy */
#define MII_TLPHY_ID 0x10 /* ThunderLAN PHY ID */
#define ID_10BASETAUI 0x0001 /* 10baseT/AUI PHY */
#define MII_TLPHY_CTRL 0x11 /* Control regiseter */
#define CTRL_ILINK 0x8000 /* Ignore link */
#define CTRL_SWPOL 0x4000 /* swap polarity */
#define CTRL_AUISEL 0x2000 /* Select AUI */
#define CTRL_SQEEN 0x1000 /* Enable SQE */
#define CTRL_NFEW 0x0004 /* Not far end wrap */
#define CTRL_INTEN 0x0002 /* Interrupts enable */
#define CTRL_TINT 0x0001 /* Test Interrupts */
#define MII_TLPHY_ST 0x12 /* Status register */
#define ST_MII_INT 0x8000 /* MII interrupt */
#define ST_PHOK 0x4000 /* Power high OK */
#define ST_POLOK 0x2000 /* Polarity OK */
#define ST_TPE 0x1000 /* Twisted pair energy */
#endif /* _DEV_MII_TLPHYREG_H_ */

58
sys/dev/mii/tlphyvar.h Normal file
View File

@ -0,0 +1,58 @@
/* $NetBSD: tlphyvar.h,v 1.1 1998/08/10 23:59:58 thorpej Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_MII_TLPHYVAR_H_
#define _DEV_MII_TLPHYVAR_H_
/*
* Constants used by the ThunderLAN driver to notify the PHY
* layer which media this particular interface supports on the PHY.
* There can be only one of BNC or AUI (since the same line driver
* is used).
*
* For cards using the ThunderLAN PHY that also support 100baseTX,
* they often want to bypass the 10baseT support on the ThunderLAN
* PHY (because the UTP is wired up to another PHY). That is what
* the NO_10_T bit is for.
*/
#define TLPHY_MEDIA_10_2 0x01 /* 10base2 (BNC) */
#define TLPHY_MEDIA_10_5 0x02 /* 10base5 (AUI) */
#define TLPHY_MEDIA_NO_10_T 0x04 /* don't use the 10baseT (UTP) */
#endif /* _DEV_MII_TLPHYVAR_H_ */