COP0_SYNC
In R5900 mtc0, tlbr, tlbp, tlbwi, tlbwr must be followed by sync.p.
if defined MIPS3_5900, COP0_SYNC is defined as sync.p. else nothing.
IPL_ICU_MASK
mask interrupt directly ICU instead of SR.IM.
I've added this feature to support software interrupt for R5900.
and this option may be useful for platform which has cascaded ICU.
distinguished by SYSID register in the system controller. Note
that PRiD 0x20 is for a standalone RC32364 processor which has the
same 32300 core inside. Rather better to name them MIPS32 ISA.
and data cache sizes). R4000 uses 2^(12+IC) and 2^(12+DC). IDT32364
uses 2^(9+IC) and 2^(9+DC).
abstract around the problem by making the base a parameter to the
MIPS3_CONFIG_CACHE_SIZE macro. we pass the base down from mips_vector_init
to mips3_vector_init and to mips3_ConfigCache (where it is used).
XXX: someone with an MIPS3_4100 should switch to this and get rid
of the ugly ifdefs in cpuregs.h
and rename it to MIPS3_TLB_WIRED_UPAGES.
The value of wired register becomes variable on arc port,
and arc is the only mips3 port which uses the wired TLB entries 2..7.
Support VR4100.
Support 16KB page.
Support CPU without FPU.
Fix virtual alias problem(physio() case).
[new options]
options MIPS3_4100 /* VR4100 core */
options MIPS_16K_PAGE /* enable kernel support for 16k pages */
options SOFTFLOAT /* No FPU; avoid touching FPU registers */
* commit isapnpvar.h changes required for ARC to support plain isa.
* fixup mistake over mips/include/cpuregs.h.
* mips/mips_machdep.c:
set L2 cache-size for arc, cleanup use of L2cache present
vs L2 cache-size variables. check for no L2 cache on kernels
configured to require one. misc cleanups.
* mips/mpis/trap.c: more locore stack-traceback label cleanup.
XXX Locore callbacks for mips3, mips4, r4600 cacheflush need more work.
Adds (most) support for ARC platform to port-independent mips code.
Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.
Open issues:
* Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
Code derived from Per Fogelstrom's OpenBSD source doesn't work
on mips3 pmaxes with L2 cache.
* Still some port-specific #ifdefs, for interrupt enable and
pmax L2 cache-size. Needs more thought, but overlaps with
work-in-progress by Tohru and Tsubai on spl()s and related stuff.
* cpuregs.h:
rename remaining VMMACH_xxx TLB macros to MIPS_TLB_xxx.
Add compile-time MIPS3-only, compile-time MIPS1-only, and
runtime (both) definitions for number of TLB ASIDs (tlb pids)
and shift count to extract a TLB pid.
* locore.h:
Delete unused vector slot for indexed TLB writes.
mips1 and mips3 TLBs are different enough that we have
to break them out at the caller anyway.
* Add compile-time MIPS3-only andcompile-time MIPS1-only
macros to call locore functions directly by name.
Use the existing method table only if
* mips/mips_machdep.c, mips/trap.c, mips/pmap.c, pmax/machdep.c:
Use MIPS3_ or MIPS1_ specific names for TLB pids in
mips3 and mips1 specific code paths (e.g., creating the kernel stack
for process 0).
Add `options MIPS3' to pmax/conf/GENERIC.
* cpuregs.h:
Delete unused VMMACH_ names (e.g., duplicates of PTE bits in pte.h).
Change remaining VMMACH_xxx names to MIPS1_xxx or MIPS3_xx.
Fold remaining compile-time definitions into a single #ifdef MIPS3.
* Use MIPS1_ names in locore_r2000.S, mips3_ names in locore_r4000.S
* Garbage-collect MachHitFlushDCache()
* psl.h:
use MIPS1_, MIPS3_ symbolic names for Cause register bits.
change _R3K to MIPS1_, _R4K to MIPS3. Conditionalize for mips1 only,
mips3 only, or when both are defined, use runtime CPUISMIPS3 test.
* add "MIPS_3k_" for the MIPS-I r[23]000-specific register definitions.
* add "MIPS_4k_" for the MIPS-II/III r4000-specific register definitions.
* add #defines that provide the old values for locore and user
code, so the existing code continues to compile.
Regression-tested against the old headers by grepping for #define's,
editing out the defined symbols, and preprocessing with both the previous
machConst.h headers and this version.
Some unused symbols (CPU and FPU must-be-zero constants) are no longer defined.
Pica interrupt masks are now constant expressions instead of constant
values.
TODO:
* factor out the common #defines into src/sys/arch/mips.
* Get rid of the Sprite coding-style names (MACH_xxx).
* Separate out the r3k/r4k differences from the Pica/pmax differences.
* Figure out how to have a run-time choice of r3k vs. r4k support,
instead of a compile-time choice.
uch