597194532e
Add a capability bit that indicates support for Gigabit Ethernet
...
jumbo frames, and use it in SIOCSIFMTU.
2001-06-03 03:07:39 +00:00
70b2367cfd
1.5W -- hardware IPv4/TCP/UDP checksumming support.
2001-06-03 02:48:45 +00:00
c8642d34a1
let kernfs_mmap() use the default error method.
2001-06-03 02:23:31 +00:00
27e388d697
let portalfs_mmap() use the default error method.
2001-06-03 02:22:40 +00:00
6e2828061f
procfs_bmap() should never be called, make it a "bad op".
...
let procfs_mmap() use the default error method.
2001-06-03 02:21:35 +00:00
f0f999ee47
Skip the pseudo-header checksum if nxt == 0.
2001-06-03 01:37:28 +00:00
9086deaf4d
Default to kernel_map if no addr is available.
2001-06-03 00:32:25 +00:00
6a32761143
Now that cpu_dataabt_fixup() can fail, print slightly more useful information
...
(address and disassembly of the instruction that aborted) when it does so.
2001-06-02 22:48:40 +00:00
3c88c46567
In {early,late}_abort_fixup(), return ABORT_FIXUP_FAILED, rather than
...
panic'ing, if we hit an instruction we can't fix up. This saves 250-odd bytes
of code, and should allow the caller to print a more useful message.
2001-06-02 22:30:07 +00:00
f594a52dae
late_abort_fixup: Get the indentation right!
2001-06-02 22:08:11 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
424f7a1e65
Make PHY matching all table-driven.
2001-06-02 21:39:38 +00:00
0c870e10e0
Convert bus_space_{read,write}_multi_1() into macros, since they're just
...
wrappers round {read,write}_multi_1() anyway.
2001-06-02 21:31:02 +00:00
54a986d7fc
Replace arm6_dataabt_fixup() and arm7_dataabt_fixup() with early_abort_fixup()
...
and late_abort_fixup(), based on the abort model in use, rather than the CPU
type. This cleans up the code and makes it smaller. Only tested on an
ARM6 -- I can't find my ARM710a card right now.
2001-06-02 21:03:32 +00:00
947699688a
Create hcscreg.h, and put a couple of magic numbers in there.
2001-06-02 20:13:50 +00:00
7089595665
Initial cpufunc operations for ARM3. Not actually used yet.
2001-06-02 19:01:03 +00:00
821ec03ed9
replace vm_map{,_entry}_t with struct vm_map{,_entry} *.
2001-06-02 18:09:08 +00:00
90b4d889db
Silent gcc 3.0 warnings that multi-line string literals are deprecated (and
...
these literals should not be multi-line. It looks like they became that way
when a developer got a bit carried away when KNFing the code...)
2001-06-02 17:29:46 +00:00
0319a3d7bf
Add a missing line from i386/i386/pmap.c to make this work again.
2001-06-02 16:47:17 +00:00
ad9d3794b0
Implement support for IP/TCP/UDP checksum offloading provided by
...
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 16:17:09 +00:00
ca4d373730
Implement support for IP/TCP/UDP checksum offloading provided by
...
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 16:17:06 +00:00
9590a56496
Use bus_space_{read,write}_multi_stream_2 where available.
2001-06-02 15:49:16 +00:00
4db9600c94
use hd0a instead sd0a in 'help' command example
2001-06-02 14:56:13 +00:00
4788337ddb
Fixed a rough buf in ptrace SETFPREGS (was using regs instead of fpregs)
2001-06-02 13:49:44 +00:00
af667cdd42
The io offsets in arm32/isa/timerreg.h included the IO_TIMER1 offset.
...
With dev/ic/i8253reg.h this is not the case.
Add IO_TIMER1 to all offsets used in inb and outb. This fixes port-arm32/13009.
2001-06-02 12:51:28 +00:00
fd7e9d6d32
Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are
...
unique anyway. Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
2001-06-02 12:07:34 +00:00
58467b0a9d
Slighly improve the PTRACE_CONT comment
2001-06-02 11:46:09 +00:00
e9ff9b9d73
Enable disconnect/reselect (now that it works) and parity checking.
2001-06-02 11:43:40 +00:00
68035f55f1
In DEBUG kernels, catch page faults in interrupt handlers early.
2001-06-02 11:17:32 +00:00
c81d426dcf
Save R14 (in a proper stack frame) around {read,write}_multi_1, since page
...
faults can corrupt it on arm26.
2001-06-02 11:15:56 +00:00
447793851c
Add hcsc to every configuration that has SCSI podules.
2001-06-02 10:48:54 +00:00
972ef526d2
Add hcsc, scsibus and some SCSI devices.
...
Also, add some useful compiler options to FOURMEG.
2001-06-02 10:47:55 +00:00
2d35661e6a
Use write_munti_1() to implement bus_space_write_multi_1().
2001-06-02 10:45:43 +00:00
ac0d39dfe8
Add write_multi_1().
2001-06-02 10:44:56 +00:00
3df8e425e7
Correct permissions on vmapbuf'ed pages. A read from a device is a write to
...
memory, and vice versa.
2001-06-02 10:44:02 +00:00
40033835d8
Comment DIAGNOSTIC, DEBUG out
...
Use the 'root on ? type ?' config by default, leave the nfs one commented out,
add line for root on ed0a
2001-06-02 10:37:27 +00:00
549a254824
It is misleading that the kernel outputs "DHCP server:" followed by
...
the value of "next-server" from the DHCP (or BOOTP) reply. This is
not the DHCP server's IP address (except by chance), so instead of
"server" make it print "next-server".
2001-06-02 01:52:10 +00:00
9bde6cff5c
remove bogus curly braces from a structure forward-declaration.
2001-06-02 01:19:29 +00:00
2da55b9a39
Define some extra configuration block bits used on the i82550 (a.k.a.
...
PRO 100/S), including the extended RFA format. Don't hard-code the
RFA size to allow us to use the extended format in the future.
2001-06-02 01:04:01 +00:00
f6af05f407
Back the last revision off, upon Bill Sommerfeld's request
2001-06-02 00:46:00 +00:00
5dbe622e77
When polling, raise priority level to tty, to block keyboard interrupts
...
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.
Discussed on tech-kern@.
2001-06-02 00:01:04 +00:00
b001ce9b90
g/c COMPAT_OLDBOOT from bootblocks, sprinkle some const
...
bump bootblock version to 2.10
2001-06-01 23:26:30 +00:00
09afb2735c
Add recently added linux_time.c to list
2001-06-01 23:02:55 +00:00
7e716e6849
Memory map and register definitions for the Algorithmics BONITO
...
MIPS memory and PCI controller. This file is provided by Algorithmics.
2001-06-01 20:29:33 +00:00
2b5df8b7ff
vm_page_t -> struct vm_page *
2001-06-01 19:52:54 +00:00
5fbaedc40d
sync with GENERIC 1.405
2001-06-01 16:50:31 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
71cb790fb5
Add support for the Algorithmics P-4032 board. This is totally
...
untested, since I have no P-4032 board, but it's no worse than
the current situation, which is "totally non-working P-4032
support in the ARC port, of all places".
2001-06-01 16:00:03 +00:00
23a3dc1508
If a bus doens't want to use an extent, don't force it to.
2001-06-01 15:57:31 +00:00
356699e86b
Fat-trimming.
2001-06-01 15:30:11 +00:00
c702830c42
The P-4032 has no ISA bridge/bus, so remove all P-4032 conditionals.
2001-06-01 15:20:06 +00:00
07187f8a43
Nuke FRAMEBUF_HW_BASE. This value is provided by the bootloader.
2001-06-01 14:08:35 +00:00
6349d0ae81
Nuke FRAMEBUF_{HW_,}BASE. This hack does no good.
2001-06-01 14:06:43 +00:00
ea77ec5725
Move some low-level code (SVC mode switching and PID address translation
...
disabling) which was written using inlined asm in initarm() to just after
the kernel entry point.
2001-06-01 14:04:29 +00:00
1331bcc296
cardbusvar.h is divided into two files: cardbusvar.h and cardbusreg.h.
2001-06-01 10:30:37 +00:00
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
78aad8f79e
Mark evcnt(9) item as done.
2001-06-01 08:31:07 +00:00
781f6920ab
use default hoplimit when incoming interface is not given to icmp6_reflect.
...
sync with kame
2001-06-01 05:54:19 +00:00
37326d639b
Rename assembly files that are pre-processed by cpp to use an S suffix.
2001-06-01 04:20:04 +00:00
9f159a8918
Remove 4096-byte gap between .reginfo and .data, suggested by
...
Ian Taylor <ian@zembu.com>.
2001-06-01 03:55:30 +00:00
f4f6c1dd1c
Enable SCSI.
2001-06-01 03:53:29 +00:00
76b3b49bb8
Add support for jornada720's framebuffer.
...
The functionality is almost same as bivideo, and hardware rasops and
power saving are not yet supported.
2001-06-01 02:51:03 +00:00
b3e7ecfd97
Delete the XXX'd includes of <dev/isa/isavar.h> and <sys/kernel.h>.
...
These aren't needed. Tested on i386 and alpha.
2001-06-01 00:38:31 +00:00
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
f57a0847d2
fix off by one error. extra one page is needed for the case where
...
buffer is not page aligned (e.g. raw i/o case).
2001-05-31 20:56:29 +00:00
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
ea2e5754dd
missing opt_inet.h
2001-05-31 19:56:13 +00:00
9bac50748f
"opt_ddb.h" should be included at the beginning of source file,
...
because some headers (in this case <systm.h>) refers symbols (e.g. DDB)
defined in the opt_ddb.h
2001-05-31 19:41:57 +00:00
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
59ba4788ce
Deprecate intrcnt/intrnames in favour of the generic evcnt(9) interface.
2001-05-31 18:46:07 +00:00
2128d9199a
Enable frobbing the 1000baseT control register on Gig-E PHYs,
...
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
2001-05-31 18:44:48 +00:00
a6e732946b
Add an Ethernet option bit for master mode (for 1000baseTX, the link
...
master provides the clock -- this is normally the switch, but if you
are doing back-to-back NICs, you need to tell one side to be the master).
2001-05-31 16:30:04 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
ea1aed7db2
Make the number of ticks between auto-negotiation tries PHY-specific,
...
and default every PHY to 5 seconds (what we used before). If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
2001-05-31 16:02:29 +00:00
f4afeda420
Reduce the delay when polling so that dumps go faster.
2001-05-31 11:31:43 +00:00
1a891f65d4
One more gcc-2.95 issue.
2001-05-31 09:19:25 +00:00
283e406cb0
drop to prom on "halt" as well.
2001-05-31 08:55:19 +00:00
4d3b32a658
Cosmetic change.
2001-05-31 08:33:40 +00:00
da8f8f1e72
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
...
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.
2001-05-31 07:37:01 +00:00
1f4f9ae5c2
Fix minor typos.
2001-05-31 07:24:23 +00:00
ad090e7062
Regen; added NatSemi DP83891.
2001-05-31 03:32:38 +00:00
3ae72855b1
Add product ID for the NatSemi DP83891 1000baseTX PHY.
2001-05-31 03:32:20 +00:00
9f63d3cd86
Typo in last.
2001-05-31 03:07:14 +00:00
f07f44812d
The 1000baseT CR and SR are overlapped with the 100base-T2 CR and SR.
...
Note this in a comment. Add the 1000baseT CR and SR bits.
2001-05-31 03:06:46 +00:00
f998b62e15
Fix commnet; hpcmips isn't x86 architecture.
2001-05-31 02:30:04 +00:00
299159546d
s/Alpha/MIPS/ in comment.
2001-05-31 02:20:55 +00:00
c227148511
PRiD 0x18 is shared by RC32334, 332 and 355. These SoCs are
...
distinguished by SYSID register in the system controller. Note
that PRiD 0x20 is for a standalone RC32364 processor which has the
same 32300 core inside. Rather better to name them MIPS32 ISA.
2001-05-31 02:06:26 +00:00
e7c225d7b2
Regen; product IDs for IDT RC32334 and RC32332 systeml controllers.
2001-05-31 01:13:33 +00:00
811d8d9102
Add product IDs for IDT RC32234 and RC32334 system controllers.
2001-05-31 01:10:34 +00:00
ba87a6d444
Add gcc-2.95 version.
2001-05-30 20:37:48 +00:00
3fccfbf68d
Uninitialised variables, from Krister Walfridsson: in umass_scsipi_request()
...
initialize cmd before using it. Now that it's initialised earlier, use it
instead of xs->cmd
2001-05-30 20:31:39 +00:00
6973b27309
Uninitialised variable (from Krister Walfridsson): in acard_chip_map()
...
drop compatchan and use the real channel number instead.
2001-05-30 20:30:02 +00:00
708bb529d3
uninitialised variable (from Krister Walfridsson):
...
in st_cmprss(), init flags to 0 (never changed, but this should change soon
anyway, for ATAPI tapes support)
2001-05-30 20:28:17 +00:00
23395d5017
build faith(4) only if INET and INET6 are specified.
...
From: joda@pdc.kth.se (Johan Danielsson) on tech-net
2001-05-30 17:50:46 +00:00
96a42a18dc
fix mbuf leak due to meaningless MGETHDR. from niels provos
2001-05-30 16:42:02 +00:00
d84d2c6c85
add missing #include "opt_kgdb.h"
2001-05-30 15:24:23 +00:00
e2c5f5866f
Use sys/arch/arm/arm/blockio.S.
...
Actually, these functions aren't used by hpcarm but is necessary to be
able to link sys/arch/arm/mainbus thing.
2001-05-30 14:39:19 +00:00
49927dd845
Add itepoll() prototype as suggested by 'maximum entropy' (pr#13047).
2001-05-30 14:25:07 +00:00
2eae10adb5
Inline bswap{16,32} when the argument is constant.
2001-05-30 13:08:34 +00:00
72943f1165
Pasto.
2001-05-30 12:52:06 +00:00
67afbd6270
use _KERNEL_OPT
2001-05-30 11:57:16 +00:00
09cf52ad81
regen.
2001-05-30 11:48:07 +00:00
c13e3a6693
use _KERNEL_OPT
2001-05-30 11:40:35 +00:00
6a89288a37
use _KERNEL_OPT.
2001-05-30 11:37:21 +00:00
72d327d434
use _KERNEL_OPT not _KERNEL&&|_LKM
2001-05-30 11:27:46 +00:00
f591dd2f9d
Cosmetic change.
2001-05-30 09:21:47 +00:00
f32430d518
Add a case clause for IDT RC32332/RC32334 processor personality
...
inside a commented-out block.
2001-05-30 09:06:28 +00:00
16a60efd2c
Add PRiD 0x18 for IDT RC32332/RC32334 processors.
2001-05-30 07:21:51 +00:00
c973d6a0eb
Skip the pseudo-header if nxt == 0. This is already documented
...
in in6_cksum(9) and is also the behavior of the i386 optimized
version.
2001-05-30 03:06:56 +00:00
2d632efc89
Start using the blockio functions. This makes raw reads from hcsc 20% faster
...
(is that all?).
2001-05-30 00:19:43 +00:00
f15491e9d3
Move the declarations of blockio.S functions from katelib.h to a new, exciting
...
<arm/blockio.h>. katelib.h includes it for compatibility.
2001-05-30 00:16:36 +00:00
d51c27dfa8
Add read_multi_1() which does what it says fairly fast.
2001-05-30 00:14:09 +00:00
966a1b86f8
initialize the b_dep field in malloc()'d buffers. fixes PR 13065.
2001-05-29 23:08:06 +00:00
7d9a4dbad7
Move blockio.S from sys/arch/arm32/arm32 to sys/arch/arm/arm, since I want to
...
start using it on arm26.
hpcarm gets to keep its own version, since it's not identical and I haven't
got an hpcarm box to test.
2001-05-29 23:03:20 +00:00
d674a69f7a
And now we're running!
2001-05-29 21:55:00 +00:00
2de1ab0486
Add ci_cpuid.
...
Change the CLKF_ macros because the idle loop is now running at IPL1.
2001-05-29 21:29:32 +00:00
3b4d7a2948
Must lock kernel when softclock is called from outside hardclock.
2001-05-29 21:28:14 +00:00
1cf7a84a88
Add a bunch of locking code for MP systems.
2001-05-29 21:27:25 +00:00
c20a10d57d
Call proc_trampoline_mp() after fork in multiprocessor environment.
2001-05-29 21:26:44 +00:00
6492868388
Change Swtch so that the old process context is stored directly and the
...
idle loop is on the interrupt stack instead of the last running process'
stack. This is needed to work in a multiprocessor environment.
2001-05-29 21:25:11 +00:00
f0c1fb1bb2
Initialize DDB at boot time and break into it if the "d" argument
...
is specified to the kernel.
XXX PMON doen't load symbols for us -- need a dbsym(1) for ELF.
2001-05-29 18:40:25 +00:00
5331656107
The QED RM7000 can use the same idle routine as the QED RM52xx.
2001-05-29 18:19:20 +00:00
74fa4349ae
Install power-saving idle routines at the end of cpu_identify(). We
...
currently handle the QED RM52xx here.
2001-05-29 17:54:56 +00:00
c8988c2caa
Add an idle loop routine for the QED RM52xx family. This uses the
...
RM52xx `wait' insn to power down the pipeline.
2001-05-29 17:51:55 +00:00
3c596b34a3
We need the fonts for pci_vga too...
2001-05-29 10:39:56 +00:00
9c1aa86e46
One less item (MD siop driver is no more).
2001-05-29 08:20:42 +00:00
bb159c932e
Regen.
2001-05-29 06:45:56 +00:00
dbacb7c9b6
Move over to pciide. My CDROM drive wouldn't work with the wdcisa attachment,
...
but it does work with the pciide attachment.
2001-05-29 06:42:21 +00:00
49009d088a
Import pciide_machdep.c from i386.
2001-05-29 06:26:08 +00:00
60c1352cd4
Prototype milan_vga_init()
2001-05-29 06:02:26 +00:00
73cc88a7dd
Whoops, where did the include of vga_pci.h go?
2001-05-29 06:01:27 +00:00
0f3cd124db
Fix compile error.
2001-05-29 05:58:18 +00:00
3783ca5d30
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
...
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.
2001-05-29 02:20:20 +00:00
ffcbc851a0
fix some problems in sddump() with uninitialized variables.
2001-05-29 01:02:39 +00:00
f2800b2299
Don't have conf.h (pasto).
2001-05-28 23:25:25 +00:00
c5260261ba
Use the pseudo-DMA facilities of the HCCS SCSI podule. Code largely derived
...
from the pc532 "ncr" driver.
This gets me up to 300 KB/s from /dev/rsd0a on my A310. I think
bus_space_{read,write}_multi_1 and copy{in,out} are the bottlenecks now.
2001-05-28 22:54:10 +00:00
9e78300eda
remove check for too-small MSGBUFOFF now that the reason for it is gone.
2001-05-28 22:47:05 +00:00
9d8dc820a8
Forgot bsd.kinc.mk
2001-05-28 22:34:25 +00:00
187cadcb77
don't define bpendtsleep in profiling kernels since it confuses gprof.
2001-05-28 22:20:03 +00:00
ae0ddea4f6
in pagemove(), use pmap_k{enter_pa,remove} instead of pmap_{enter,remove}
...
since buffer cache pages aren't really managed by UVM.
2001-05-28 22:16:17 +00:00
21b70bf745
assert that pmap_extract() succeeds.
2001-05-28 22:11:45 +00:00
8c221ed505
style cleanup.
2001-05-28 22:00:12 +00:00
e49a700498
remove a useless call to uvm_map_protect(). the kernel text is already
...
mapped read-only in pmap_bootstrap() and the comment which tried to
explain why this might be needed anyway didn't make any sense.
2001-05-28 21:54:26 +00:00
1cedb649d4
move the spl*() and IPL_* definitions to intr.h.
2001-05-28 21:06:18 +00:00
a8651c4b09
make sun3x work again after the recent change to the m68k cpu_kcore_hdr:
...
allocate a page for dumps like the sun3 does rather than using part of
the msgbuf page. this also lets the msgbuf use the full msgbuf page.
2001-05-28 20:56:54 +00:00
a83346f337
don't abuse cf_unit.
2001-05-28 20:52:34 +00:00
83da433ada
fix for UX96 (and all Yamaha specific devices, hopefully).
...
- fix how to get endpoint addresses.
- fix allocate count of pipes.
- add necessary null checks for asymmetry jacks.
2001-05-28 20:52:06 +00:00
d5c72b21e5
s/ncsrc/osiop.
...
While I'm here, ditch some excess baggage which is useless for
the RAMDISK kernel.
2001-05-28 18:39:45 +00:00
5505749bb1
add new device; Yamaha UX96 USB MIDI I/F.
2001-05-28 18:28:04 +00:00
47ae105daa
Add Makefile snippets to install netboot in installation/netboot
...
under ``make release''.
2001-05-28 18:21:12 +00:00
af63f8979c
D'oh, clear the soft interrupt bits in CAUSE *before* servicing
...
soft interrupts, rather than after, so that soft interrupts scheduled
by other soft interrupts don't get lost.
2001-05-28 18:19:27 +00:00
442a329915
Statically-initialize `allevents' so that events can be registered
...
very early (before main() is called).
2001-05-28 16:40:31 +00:00
16b9c60621
A port to the Algorithmics MIPS evaluation boards. We currently
...
support the P-5064, which has a QED RM5xxx CPU soldered on.
There is some skeletal support for the P-4032 (an older board, which
had an R4xxx CPU). There are some placeholders for the P-6032, which
is their newest board, but no real code yet (the P-6032 has a different
PCI controller, the Algorithmics BONITO).
There are still some (apprently softintr-related) problems with the
algor kernel, but it works well-enough to self-host.
Kudos to Allegro Networks for loaning me a P-5064 board on which to do
the port.
2001-05-28 16:22:13 +00:00
7918542181
Need <lib/libkern/libkern.h>.
2001-05-28 15:53:51 +00:00
ed8360b3d7
Add missing semicolon.
2001-05-28 14:40:49 +00:00
eb9637dd7e
Add COMPAT_15 and comment out COMPAT_SUNOS. (It's hardly used and saves
...
a bit of space on low memory models).
2001-05-28 11:14:41 +00:00
36ea8f0ed5
Fixed a potential security problem (copyout after an error)
2001-05-28 10:51:20 +00:00
2bcf7a5971
Add 'prev_sr' argument to milan_isa_intr() so we can properly defer interrupts
...
that come in at the wrong time.
2001-05-28 08:41:37 +00:00
b1ff453ae9
Add Milan console initialisation code.
2001-05-28 08:30:03 +00:00
722a3ab56b
Add VGA console probes.
2001-05-28 08:12:47 +00:00
a82df0faed
Pass iot and memt to check_for_vga()
2001-05-28 07:22:37 +00:00
78dbcfe665
Add bus_space_vaddr().
2001-05-28 07:16:11 +00:00
be288018e2
PCI_VGA_SIZE -> PCI_MEM_SIZE. (Plus some comments on those constants).
2001-05-28 06:43:19 +00:00
2d8c98280c
Cleanup. Addresses port-x68k/13051.
2001-05-28 06:18:20 +00:00
45701591c6
add a genfs_mmap() and change all of the disk-based filesystems
...
to implement VOP_MMAP() with the genfs version, in preparation for
actually using this VOP.
2001-05-28 02:50:51 +00:00
a62b5c1e2e
add a comment why IFF_PROMISC is handled separately for SIOCSIFFLAGS:
...
Handle special case for IFF_PROMISC. If only IFF_PROMISC
flag is changed, do not call an_init() to avoid initiating
reassociation to another access point. It is really
helpful for tcpdump(8).
2001-05-28 00:46:35 +00:00
0a3911863f
Use structure assignment instead of bcopy.
2001-05-28 00:15:10 +00:00
8fb5853698
Change the bcopy's to structure assignments.
2001-05-28 00:12:21 +00:00
3686c30f46
Add RTC_OFFSET=0 line.
2001-05-27 23:52:41 +00:00
e44d476e4e
typo in comment
2001-05-27 23:46:51 +00:00
c4633b8744
Add RTC_OFFSET line (see port-macppc/10265).
2001-05-27 23:39:03 +00:00
8676d3773e
Honour RTC_OFFSET. Patches from Y. Takizawa <you@nightbreak.org> via
...
SUNAGAWA Keiki in port-macppc/10265. Also addresses port-macppc/10949.
2001-05-27 23:38:12 +00:00
7046b15b3d
Fixed the return value of ptrace for PEEKTEXT and PEEKDATA: return value must
...
be a pointer to data, which holds the result. Linux's glibc undo this odd
operation to bring the standard ptrace behavior to userland.
2001-05-27 21:17:16 +00:00
befe23c119
Implements correctly PEEKUSER and fixes various serious bugs. The status
...
of this file is not "officially broken" any more (gdb works).
2001-05-27 21:15:07 +00:00
383c1b6319
Fixed two typo in comments
2001-05-27 21:11:12 +00:00
ebf9e47c26
Add quirks for the Algorithmics P-5064 on-board 21143, and a way to
...
get the Ethernet address from it (they don't have an SROM).
XXX The latter should be replaced with devprops when they exist.
2001-05-27 21:00:33 +00:00
aad64f942b
!_LKM inclusion protection for opt_kgdb.h
2001-05-27 20:59:22 +00:00
e2148768dc
Change _MACHINE_PIO_H to _POWERPC_PIO_H
2001-05-27 20:59:15 +00:00
45effccbef
make the defopted "LEV6_DEFER" work for LKMs, too.
2001-05-27 20:22:57 +00:00
667dd41596
Remove ethernet CRC on received packets.
2001-05-27 19:36:06 +00:00
b7fc0b163a
Compare arguments must have correct order, won't work as expected otherwise.
2001-05-27 19:33:20 +00:00
47745a094d
Add support for the Algorithmics ISA floppy controller.
2001-05-27 18:16:21 +00:00
ce289cc293
Handle non-contiguous BARs. Needed to be able to configure e.g.
...
IDE and USB on a PIIX3.
2001-05-27 17:50:40 +00:00
e91c2ce847
remove debug printfs, which can be too noisy. sync with kame.
2001-05-27 17:36:07 +00:00
aee2068e10
Don't install machine/loadfile_machdep.h; per PR#12666.
2001-05-27 15:37:06 +00:00
7d1ef74930
Fix kern/13049: missing unlock on failure exit from pmap_enter()
2001-05-27 14:31:27 +00:00
4aaf078a4a
Assorted microtime fixes (similar to fixes I made yesterday when
...
porting this code to i386mp branch):
- call microset() early on each cpu so that calls to microtime()
before the first clock interrupt don't return trash. this manifested
itself as garbage runtimes in "ps" for kernel threads.
- avoid races between hardclock updating "time" and microset on a
different cpu reading it by adding a "microset_time" global which is
initialized from "time" on the primary cpu.
- call microset every hz ticks, not every hz+1 (cosmetic)
2001-05-27 13:53:24 +00:00
021d12d997
Add 35401A drive (not picker) support; from Jarkko Teppo in PR
...
port-hp300/11183.
2001-05-27 09:09:05 +00:00
7520514a5e
don't abuse cf_unit.
2001-05-27 06:30:27 +00:00
d8e8c90c8a
don't abuse cf_unit.
2001-05-27 06:19:39 +00:00
fadbc7d451
- remove dependency on libsa by mkboot since it is a host tool.
...
- adjust for endianness of host.
Cross-compiling of ELF bootblocks now works.
2001-05-27 05:35:11 +00:00
e8c65098f6
Protect against possible alignment problems.
2001-05-27 05:31:58 +00:00
f94a9b7669
Alignment for on ELF systems. ELF bootblocks now work.
2001-05-27 05:30:41 +00:00
d0403f9f11
Add missing line in recording. Copy & paste error...
2001-05-27 05:30:02 +00:00
9be5657e02
Alignment fix. rd disks now work on ELF systems.
2001-05-27 05:29:48 +00:00
cbfe174737
Reset dx_nextoff and dx_nextsize before transfer.
2001-05-27 02:18:07 +00:00
78458be84d
correct binary key material handling. sync with kame
2001-05-27 01:40:16 +00:00
c77ddb45b8
more fun with QUEUEDEBUG: include the file and line number in panics
...
and set the list pointers in elements to NULL after removing the element
from the list.
2001-05-27 01:36:47 +00:00
9ec2953eef
Make "reboot" an option at the root device/filesystem prompt (we
...
already had a "halt").
2001-05-27 01:29:50 +00:00
00e5ad3408
remove files we no longer need/maintain. sync with kame
2001-05-27 01:03:53 +00:00
6ebe782061
mcount() is named __mcount() on ELF, do the right thing.
2001-05-27 01:01:08 +00:00
f5065c9c55
change the one non-extended asm back to using a single % before a
...
register name. the rule is that extended asms should have the
regsiter-prefix %s escaped by doubling them, but non-extended asms
don't do the escaping thing, so there the %s should not be doubled.
2001-05-27 00:58:57 +00:00
cbea766fd0
Add hcsc.
2001-05-26 23:02:06 +00:00
5cc459efcc
Quick hack of a driver for the HCCS 8-bit SCSI podule, based on the Oak driver.
...
Tested to the extent that it finds my disc.
2001-05-26 23:01:19 +00:00
524a19371f
Make t_flags a u_int instead of u_short. It's followed by a mbuf pointer
...
so there's padding around it already. And it increases the amount of bits
available for TF_* flags.
2001-05-26 22:02:57 +00:00
ebf4596009
regen
2001-05-26 21:48:31 +00:00
eb6eb503f1
Fix typo in last commit.
2001-05-26 21:48:21 +00:00
7b0faa44c9
regen
2001-05-26 21:47:30 +00:00
d5ecc6c516
Add the 8-bit podules I got at Wakefield (except the A3000 Nexus,
...
which seems not to work).
2001-05-26 21:47:09 +00:00
24f26c957e
Add TCP_MD5SIGNATURE option.
2001-05-26 21:40:55 +00:00
c90ead639a
regen.
2001-05-26 21:34:04 +00:00
07cabef8a2
replace vm_page_t with struct vm_page *.
2001-05-26 21:33:11 +00:00
423279efd8
Honor rtc_offset.
2001-05-26 21:32:30 +00:00
7952ffd61f
defined(vax) -> defined(__vax__). This may fix PR#12919.
2001-05-26 21:29:45 +00:00
11a9651c8f
replace vm_page_t with struct vm_page *.
2001-05-26 21:27:10 +00:00
474bc8ee6d
Remove one #ifdef vax, bugfix another. Should probably be #ifdef i386 also.
2001-05-26 21:27:09 +00:00
e44e9dec8a
replace vm_page_t with struct vm_page *.
2001-05-26 21:27:02 +00:00
41faed1386
Use cdev_decl() instead of local prototyping.
2001-05-26 21:24:38 +00:00
6d8a82ebc2
Use bus_space on arm26.
...
Update the comment to match list of bus_space-using ports.
Delete oak from list of drivers that need converting.
2001-05-26 20:55:48 +00:00
ab0637016a
Support NCR5380_USE_BUS_SPACE.
...
Add comments explaining the card a bit (and how badly we support it).
Add in-core RCSID.
2001-05-26 20:53:53 +00:00
e90e316b11
Changed maple device to attach per function instead of per unit.
...
Raw maple unit access is now possible through /dev/maple*.
2001-05-26 19:04:39 +00:00
772a964bef
fix typo.
2001-05-26 18:16:01 +00:00
bab53421c4
"oak" is now MI.
2001-05-26 17:50:30 +00:00
c7a388d937
Turn "oak" into an MI podulebus driver. Tested on my new A310.
2001-05-26 17:49:46 +00:00
f0ebb6c5a8
Add a comment about acemidi.
2001-05-26 17:47:45 +00:00
bdecf91bef
Add infrastructure to allow ports to override build of in6_cksum.c by
...
enabling the INET6_MD_CKSUM option, which is defopted into opt_inet.h.
Supply an i386 assembly version of in6_cksum in in_cksum.s; on
P6-family cpu's, this is is roughly 20% faster than the C code in
sys/netinet6 for ethernet-mtu-sized mbufs in L1 cache. Turn on
INET6_MD_CKSUM in i386/conf/std.i386
While we're here, also nuke some now-obsolete XXX comments from
in_cksum.s.
2001-05-26 17:46:11 +00:00
118ddca24a
replace {simple_,}lock{_data,}_t with struct {simple,}lock {,*}.
2001-05-26 16:32:40 +00:00
e4e4a4a982
Fix "Unknown or missing variable at line 3210". I'm sure this isn't the first
...
time I've fixed this bug.
2001-05-26 15:58:26 +00:00
e95e804c2f
Pull in "opt_kgdb.h"; see PR#13036.
2001-05-26 10:22:32 +00:00
2a70c2afdd
Fix pte_size values changed by my misunderstanding in the previous.
2001-05-25 23:57:06 +00:00
e2a08caf68
Replicate pte unmap change from i386 pmap.c
...
(fix kern/12554 workaround).
2001-05-25 23:34:44 +00:00
c9de53f96e
Create a kernel thread for Fibre Channel cards. This is the new
...
way of doing business- modulo some startup spasms and peculiarities
of the way kthreads are started (*after* configuration, weird) and
some strangeness with the freeze/thaw code, what now happens is
that any of Loop Down, LIP, Loop Reset or Port Datbase or Name
Server Database Changed ASYNC events cause the queues to freeze
for this channel. The arrival of a Loop UP is not relevant.
What *is* relevant is that the Port Datbase or Name Server Changed
async event indicate that it's okay to go and (re)evaluate the
state of the FC link and (re)probe local loop and fabric membership.
We have a kthread do this because it's *sooooo* much nicer to be
able to sleep while doing the 130-250 mailbox commands it'll take
to re-evaluate things.
When the state is well known again, we can unfreeze the channel
queues. Then, as commands start arriving, we simply can start them
or bounce them with XS_SELTIMEOUT (if the device in question has
gone away). Previously, we did lazy evaluation, which meant that
if a change occurred, we would wait until the very *next* command
to go rebuild stuff.
The reason this is not sensible is:
a) Even with sleeping, you can hang up your system because you might be
making some poor stat(2) call pay the price of re-evaluating the whole
fabric.
b) If we ever really want to get to dynamic attachment/detachment, we
should find out sooner, rather than later, where things get to.
Split off ispminphys_1020 from ispminphys- a 1020 has a 24 bit limit-
not anything newer.
Re-enable LIPs and Loop Resets as async events- this allows the outer
layer to set policy about them.
Roll platform major && minor. Remove bogus waitq (no longer used).
Remove callout entry in softc (no longer used). Define some shorthands
for channels. Clean up a variety of cruft left over from the
thorpej_scsipi changeover.
2001-05-25 21:45:55 +00:00
5b51f5ebe2
fix forgotten/malformed initialization of some variables.
...
(pointed out by Krister Walfridsson.)
2001-05-25 19:33:36 +00:00
339a9c8de2
Fix two typos in the BYTE_ORDER != LITTLE_ENDIAN case.
2001-05-25 08:54:40 +00:00
0cc97f1b55
Fixed panic on the cpu made by unknown vendor,
...
such as Transmeta Crusoe.
2001-05-25 04:39:33 +00:00
3845302904
remove trailing whitespace.
2001-05-25 04:06:11 +00:00
7ae7504033
Added a 'break' on the last line in a switch statement, since the ISO
...
C standard do not permit labels at the end of compound statements.
2001-05-24 10:49:31 +00:00
76475ad726
Removed an incorrect use of __CONCAT when formatting panic messages.
...
The ISO C standard says in 6.10.3.3 that if the result of using the
'##' operator "is not a valid preprocessing token, the behaviour is
undefined." Gcc 3.0 warns about this.
2001-05-24 10:33:08 +00:00
fc644273cd
print more diag message on in6_addmulti() failures.
2001-05-24 08:17:22 +00:00
6229248ec0
minor style
2001-05-24 08:12:28 +00:00
85efd7edb1
correct multicast filter handling. without this, we cannot run IPv6 on an*.
2001-05-24 08:06:04 +00:00
a7596d1912
call icmp6_mtudisc_update(foo, 0) even if ICMPv6 messages are very short.
...
let icmp6 layer decide whether we take PMTUD routes or not.
2001-05-24 07:22:27 +00:00
c9b9613b3e
for FIOGETOWN, only change the sign of *data if fo_ioctl returned without error
2001-05-24 06:52:43 +00:00
0fd012d03b
regen for whitespace cleanup
2001-05-24 06:44:30 +00:00
7dd0515e15
Use ffs asm routine in arm32 context switch code.
2001-05-23 21:49:57 +00:00
f220cad8dd
Use ffs like routine in the footbridge irq handling. It is now very similair to the iomd irq handler.
...
Note that I've kept the existing quirk of still passing the irq to the next handler even if the irq handler returned 1. I need to investigate why we do this.
2001-05-23 21:23:54 +00:00
cbf8e0eb95
Add a files.footbridge for inclusion by cats and netwinder. This is to make moving of the footbridge dir easier (when it eventually moves from arm32)
...
Also remove EBSA285 defopt from the netwinder file as the netwinder isn't an eval board.
2001-05-23 21:21:42 +00:00
8901caf8ff
Create an asm based version of in4_cksum based on the sparc version.
...
Also don't compute psuedo header for nxt == 0
2001-05-23 19:33:48 +00:00
thorpej