fc427776a7
Add stuff for I/O mapping.
1995-07-27 00:29:02 +00:00
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
d8e7ea659c
restore a deleted semicolon
1995-07-24 09:03:00 +00:00
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
4d0bd10d53
kill structure offest comments in non-fixed-size structures.
...
In some of our worlds, pointers just Aren't 4 bytes.
1995-07-24 07:08:14 +00:00
3301cf82fd
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 06:55:37 +00:00
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
979cf41d87
merge changes from update
1995-07-24 05:26:53 +00:00
607e071f1b
Fix pasto.
1995-07-24 04:34:51 +00:00
8170afdb2d
Copy changes from ISA version.
1995-07-24 04:15:35 +00:00
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
267dd7012f
merge updated version from Matt Thomas, which includes dc21041 support.
...
There are a couple of questionable changes in here, that i'm going to
hammer out of him in the next week or so...
1995-07-24 03:54:14 +00:00
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
f8b400c446
Change DEBUG-->AUDIO_DEBUG. PR# port-sparc/1241
1995-07-19 19:50:16 +00:00
0b469d4a12
add/change a few quirks:
...
(1) all Chinon CDS-431 CD-ROMs (regardless of revision)
are forced to only having LUN 0, at the suggestion
of Michael Hitch.
(2) _force_ searching of extra LUNs for the Emulex MD21/S2
ESDI bridge. It's pre-SCSI 1, but knows about LUNs.
"amazing." From Jason Thorpe.
(3) recognize an Emulex tape adapter in front of a QIC-36
tape, and have it forced to only LUN 0. This is
an odd one; vendor, name, and rev strings are all
spaces. Anything that mathes this is very likely
broken, anyway, so might as well give it a shot.
Again from Jason Thorpe.
1995-07-12 09:56:09 +00:00
d8fe81c04c
implement SDEV_FORCELUNS flag, as suggested by Jason Thorpe.
1995-07-12 09:43:29 +00:00
f60db5f02a
add a SDEV_FORCELUNS flag, as suggested by Jason Thorpe, to force
...
the SCSI code to look for LUNs on prehistoric (pre-SCSI 1) drives &
controllers, where normally it would not.
1995-07-12 09:42:00 +00:00
880567e771
fix from Onno van der Linden for large-file read timeouts on double-speed
...
drives. A different read command must be used on double-speed drives.
It boggles my mind that people could design hardware this stupid.
1995-07-10 01:27:24 +00:00
5b671ea6a8
Morningstar SnapLink -> SDEV_NOLUNS, per Peter Galbavy in pr 1192.
1995-07-09 09:44:57 +00:00
21b6db23b7
play the alphabetization game
1995-07-09 09:43:07 +00:00
5a5eb678c9
QUANTUM P105S 910-10-94x A.3 -> SDEV_NOLUNS
1995-07-09 09:30:42 +00:00
c5ad4c85f0
ncr5380 chip definitions and MI part of driver.
1995-07-08 21:30:41 +00:00
e574814605
insert missing call to splx() when {aha,bt}_send_mbo() returns null.
...
from enami@sys.ptg.sony.co.jp .
1995-07-08 00:34:16 +00:00
4b4b3ee81a
Cleanup
1995-07-07 02:19:48 +00:00
dd3d2e28ed
Setup irq correctly (PR#1179)
1995-07-07 02:15:12 +00:00
0bdd4aa7c2
add support for cs4231
1995-07-07 02:11:45 +00:00
106dafc42e
Common splaudio and ISA_IPL_AUDIO
1995-07-07 01:58:04 +00:00
0589b5a222
Make mode a flag set. Full-dpulex fixes from John Kohl.
1995-07-07 01:52:30 +00:00
9624704e02
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-05 02:32:53 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
eb99dcc09a
Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit
...
the case of no pending input in compoll().
1995-07-04 06:47:18 +00:00
f4b5f723e0
Remove references to if_addrlist.
1995-07-02 00:16:00 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
28cbee6941
move to more appropriate (...reg.h) names.
1995-06-28 04:02:13 +00:00
bbe407930b
header file got renamed
1995-06-28 03:26:36 +00:00
40e29d5890
sync with my current Alpha sources
1995-06-28 02:44:51 +00:00
50937bb63a
add charles's mostly-machine-independent lance driver, which is used
...
by the Alpha port.
1995-06-28 02:24:50 +00:00
c319ff6546
these have moved to more appropriate names
1995-06-28 02:23:27 +00:00
1c5d265cad
another CD-ROM quirk, a la PR 1166
1995-06-27 20:42:45 +00:00
5ad7f31079
udpate to match ifnets new use of sys/queue.h
1995-06-27 13:13:32 +00:00
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
d093e5d8b8
make dump stubs consistent
1995-06-26 05:15:33 +00:00
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
d8264613c8
add entry for another tweaked Texel CD-ROM. from pr 1151
1995-06-24 01:22:30 +00:00
6907f7f64d
fix reference to incorrect struct (paste-o)
1995-06-21 03:56:09 +00:00
9526317aa1
vendor IDs for Acer and SIS
1995-06-20 04:50:43 +00:00
a68aae96fc
David Leonard (leonard@dstc.edu.au) noticed an embedded comment
...
delimiter in a comment within a #define (ZSWR14_DTR_REQ). Inserted
spaces in case someone wants to use this define at some point.
1995-06-19 13:15:08 +00:00
6664ae1ddd
Add another CD-ROM drive to The List.
1995-06-18 05:13:09 +00:00
4f7335a75a
macros to split out various parts of PCI registers, adjust constants
...
to match. (now, comparisons are comparisons, code doing them doesn't
have to mask.) define types for the various parts of the registers'
contents, where practical.
1995-06-18 01:34:01 +00:00
c4640b104d
define and call "pci_devinfo()", which creates a string from the
...
vendor & product IDs and class information, which is printed if device
isn't found. Optionally (via "PCIVERBOSE" option) does table lookup
to try to see if it knows what the device really is (informational only...).
1995-06-18 01:28:23 +00:00
e86a68a339
prototype for pci_devinfo function
1995-06-18 01:26:50 +00:00
c644446a99
add include for the alpha, alphabetize
1995-06-18 01:24:40 +00:00
8ced60f181
make a comment reflect the way things should be done
1995-06-18 01:23:11 +00:00
2cfceff6b5
built from pcidevs list
1995-06-18 01:09:14 +00:00
27adbb1130
learn about some PCI vendor and product numbers. not yet used
1995-06-18 01:07:04 +00:00
ae76c070ec
oops; forgot this in last commit
1995-06-17 23:06:44 +00:00
6f13f2448a
more appropriate name, as this only has PCI support subroutines.
1995-06-17 22:40:26 +00:00
7aaf918c75
d_reset reference removed. Calling of ubareset must be solved.
1995-06-16 15:26:11 +00:00
d9fc8ef092
Remove check for if_addrlist == 0; if_attach() always puts one address on
...
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
e6c81430d2
Add missing `break;'s.
1995-06-09 18:09:27 +00:00
da5b5dfa63
make match/attach routines and cfdriver struct mi
1995-06-07 06:46:04 +00:00
5a29222f9c
prototype isascan, spacing
1995-06-07 06:45:44 +00:00
d4f62dcb69
update from Ignatios Souvatzis
1995-06-07 00:13:52 +00:00
3349ad1b56
update from matt thomas
1995-06-06 23:31:24 +00:00
4bfd7749ad
Various:
...
* Check for CTS in the correct register.
* Only do a selwakeup() if we output something.
* Don't make assumptions about what TTYDISC does.
1995-06-05 19:08:09 +00:00
dede989b85
enable the de driver
1995-06-05 01:03:45 +00:00
d0d9fe6333
set a shutdown hook
1995-06-05 01:03:30 +00:00
89c30bb2e3
do the right thing with fixed-size types.
1995-06-05 00:49:45 +00:00
96caf354eb
kill old Id, add NetBSD Id
1995-06-05 00:47:42 +00:00
c71cccacde
kill old Id and Log. add NetBSD Id
1995-06-05 00:46:30 +00:00
551bcffab9
dc21040 driver, from Matt Thomas
1995-06-05 00:38:18 +00:00
5b37a8fded
Handle BREAK correctly when not entering DDB.
1995-06-04 20:50:14 +00:00
38847d04c0
Add an input FIFO, and fix several flow control problems. Based on code from
...
Felix A. Croes.
1995-06-04 20:39:22 +00:00
cea924779e
call hw->setfd with param not ptr to it
1995-06-04 15:33:50 +00:00
7d18c2534d
Add `Maxtor LXT-213S', this time without a Sun OEM addition.
1995-06-02 21:44:11 +00:00
d045544ebd
Changed ns82450 to ns8250 and dropped ns82550 from probe console messages.
1995-06-01 21:26:51 +00:00
488bc82ac3
Fix multicast filter calculation.
1995-05-28 11:29:46 +00:00
addaff473b
Only use the `no pending interrupt' bit in the IIR; the other bits
...
are too unreliable on clone chips.
1995-05-28 03:26:37 +00:00
bad826164e
split single-subdevice lookup & attachment into a subroutine
...
(pci_attach_subdev()). remove pciattach() function and the pcicd cfdriver
struct, the former because thre are a lot of attachment actions which really
are machine-dependent (perhaps even "most"), and the latter because now that
both pcimatch() and pciattach() are machine-dependent it's bad style to
declare them here and it gains nothing.
1995-05-23 03:43:06 +00:00
3ebc44f6e1
isa softc structs are larger than 'struct device'
1995-05-17 02:07:03 +00:00
c821cb684a
(1) conditionalize debugger usage in comeint with DDB, not COMCONSOLE;
...
latter would lead to undefined symbols if DDB not defined.
(2) check for break on console, and therefore debugger entry (if ddb
in kernel) earlier, so that the device doesn't need to be open.
(3) return immediately after breaking into the debugger in comeint().
(4) only do the normal character input routine in comintr if receive
mask yeilds _EXACLTY_ LSR_RXRDY. if there's only a receive
error, or there's a receive error _and_ a received character,
do comeint().
(former two by me. latter two from Bob Baron <rvb@cs.cmu.edu>.)
1995-05-12 17:54:41 +00:00
8aa6c376b6
KERNEL -> _KERNEL
1995-05-11 16:52:54 +00:00
8742c18c06
Update for slightly modified ARP handling.
1995-05-10 14:04:14 +00:00
c68110e043
Remove strings
1995-05-08 22:01:34 +00:00
2d93a58abd
Don't call hardware close in mixer_close(). From Rolf Grossmann <grossman@informatik.tu-muenchen.de>
1995-05-08 17:42:07 +00:00
05f27a97ce
Fix holes in device index space. PR#1028
1995-05-08 17:28:51 +00:00
f5675abf16
Set mixer type for rec and play level set. PR#1027
1995-05-08 16:06:38 +00:00
8951a20fe2
Auto-select open mode when opened half-duplex. From John Kohl. PR#1006
1995-05-05 22:36:14 +00:00
7d244351cf
Add `evcnt' field.
1995-05-04 19:43:27 +00:00
5d25b2c50e
machine-independent definitions for the Motorola MC146818A Real Time Clock
...
and compatible chips, including the Dallas Semicontuctor DS1287A.
This chip is used in PC's, DECstations, and Alphas, at least...
1995-05-04 19:31:18 +00:00
011aa68805
looks like some extra ')'s were left in here.
1995-05-03 21:38:57 +00:00
1d2f0bce2a
Make the byte-shifting code consistent.
1995-05-03 19:38:45 +00:00
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
8d90aefeb0
New audio driver from Rolf Grossmann.
1995-04-25 20:05:32 +00:00
e49b0de53f
short -> int (alignment)
1995-04-24 21:34:04 +00:00
6404739df8
AMD9730 telephony chip (used to be sparc/dev/bsd_audioreg.h).
1995-04-24 19:17:17 +00:00
30f71c550f
A couple of fixes frm Rolf Grossmann.
1995-04-24 19:13:52 +00:00
bfab570cda
Add constants for some keyboard controller commands.
1995-04-21 09:16:16 +00:00
cb856a9a4d
Watchdog now takes an int, not a short.
1995-04-19 22:42:51 +00:00
9e28a35469
Fix thinko in previous change.
1995-04-19 22:04:33 +00:00
53d73c77a5
Garbage collect #includes.
1995-04-19 19:10:35 +00:00
4c28b7cb87
Change `needs-count' to `needs-flag'.
1995-04-19 19:02:54 +00:00
e1315808a7
Implement comtty().
1995-04-19 18:59:27 +00:00
496acd4619
Correct a couple of things, and add a `fe' device.
1995-04-19 02:11:10 +00:00
800b1f371a
Fix obvious bug in reading from SB_MIC_PORT.
1995-04-17 23:48:06 +00:00
fa37f29dc8
Make some functions non-static.
1995-04-17 23:04:31 +00:00
15552a0e17
if_le conflicts with the Alpha; move description back to i386
1995-04-17 20:23:32 +00:00
af67271a66
try to actually (gasp!) describe the drivers.
1995-04-17 17:54:15 +00:00
d61eaf6f6d
ISA config.new files description.
1995-04-17 16:58:30 +00:00
fac8a6879e
MI EISA config.new file lists
1995-04-17 16:15:48 +00:00
982230db44
update for new locations
1995-04-17 15:48:20 +00:00
8a640328ed
clean up several ISA device interfaces: autoconfiguration, header
...
inclusion, and interrupt configuration. more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
5f252bb8ea
config.new files description for PCI mi files.
1995-04-17 07:46:10 +00:00
224a7f4533
config.new description of SCSI mi files.
1995-04-17 07:15:40 +00:00
edc749be89
cleanup; mostly KNF.
1995-04-15 10:35:24 +00:00
04e937dcbd
Don't boundary check I/O to the `raw' partition.
1995-04-15 05:01:26 +00:00
ed0da4a701
couple small changes plus a new watchdog timer from Ignatios Souvatzis <is@beverly.rhein.de>
1995-04-14 16:57:19 +00:00
d8b4389dc3
cast pointer to long when converting to integer type
1995-04-13 04:16:16 +00:00
d57b9b75ba
Take endianness into account in ed_ring.
1995-04-12 16:12:42 +00:00
333a55a4ce
Remove duplicate definition of `constty'.
1995-04-11 22:08:06 +00:00
a04aa1397a
fix up some changes
1995-04-11 18:51:55 +00:00
57289e2cf2
Split cninit from cons so ports that can't use it don't have to include it.
1995-04-11 10:06:38 +00:00
893d53414a
Sync with the rest of the world. Various additional cleanup.
1995-04-11 05:46:53 +00:00
c7a7d5c262
Sync with the rest of the world.
1995-04-11 05:10:20 +00:00
8d8af964a7
Move NIC register definitions to a global location.
1995-04-11 04:45:26 +00:00
6e9015b37a
This is deprecated.
1995-04-11 04:44:44 +00:00
b703c76655
Update for if.h. Define helper macros for accessing NIC registers. Optimize
...
edrint() a little more.
1995-04-11 04:38:42 +00:00
d4b1924adb
LANCE register definitions, plus some utility macros for the machine-
...
independent driver.
1995-04-11 04:17:50 +00:00
24a8feea65
Adjust for endianness, and move CHAN_[AB] out of here.
1995-04-11 02:35:18 +00:00
9b0d3f54e8
Move this into a generic location.
1995-04-11 02:29:25 +00:00
70839d3b04
Change start and watchdog return values to void.
1995-04-10 18:21:42 +00:00
68c8c80929
kernel_pmap --> pmap_kernel()
1995-04-10 16:48:27 +00:00
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
6e992fcd83
Add a dummy cnstop().
1995-04-10 06:30:52 +00:00
95c5c4f79f
Most of the console functions return void. Also change interrupt logic
...
slightly.
1995-04-10 01:05:55 +00:00
affcd0e2c8
Properly prototype the switch table functions. Add conf.h-like macros for
...
defining the switch tables.
1995-04-10 00:50:27 +00:00
87d43afd46
Clean up to match common code, and fix a typo.
1995-04-07 22:27:42 +00:00
3836533fc6
Add another broken CD-ROM drive to The List.
1995-04-04 05:44:32 +00:00
0e67f2a78e
Rename a few constants to match the chip documentation.
1995-04-04 01:59:28 +00:00
13ac06ec6a
More debugging printf()s, from Rafal Boni.
1995-04-04 01:44:23 +00:00
c04ae31e95
Prototype iexmit().
1995-04-03 21:22:37 +00:00
9085715229
Some pseudo-random cleanup, and try to start transmitting packets quicker.
1995-04-03 21:17:13 +00:00
7e2dabf972
Add a missing unlock.
1995-04-01 10:29:41 +00:00
508897dfcc
Insert a missing unlock.
1995-04-01 10:27:56 +00:00
03e3548ec7
Change the locking protocol to match other drivers.
1995-04-01 08:45:33 +00:00
5ef3b8b957
Always load the TOC. Turn off the TOC bit in the mode register so the busy
...
light goes off.
1995-04-01 08:40:11 +00:00
a95842832d
Bug fixes of interrupt handlers.
1995-03-30 20:55:23 +00:00
e17c63cee6
Revamp the locking mechanism slightly. Update some outdated comments, and add
...
a few new ones.
1995-03-29 23:36:27 +00:00
1d568eab9a
Revamp the locking mechanism slightly.
1995-03-29 23:04:39 +00:00
0884490297
KERNEL -> _KERNEL.
1995-03-29 21:56:46 +00:00
db0046c14d
KERNEL -> _KERNEL
1995-03-28 19:59:56 +00:00
71ab4ed9dc
KERNEL -> _KERNEL
1995-03-28 18:13:48 +00:00
aff93b44b4
Remove unused variable.
1995-03-27 21:44:11 +00:00
657ddd6fde
Remove a tiny bit of redundant code.
1995-03-27 18:08:34 +00:00
0a3d4f358a
It's not necessary to do a GETSTAT before each read.
1995-03-27 16:48:45 +00:00
c61cb27f9c
Small garbage collection, and turn off debugging info by default.
1995-03-27 16:04:07 +00:00
306af9bd89
Largely rewritten by me, with some input from Dave Burgess. Implement most of
...
the CDIOC* calls correctly, improve performance by 10x when interrupts work,
and implement the same generic disk framework as other drivers.
Needs some more work.
1995-03-27 15:45:20 +00:00
7c04233887
KERNEL -> _KERNEL
1995-03-26 20:23:52 +00:00
b51403f60d
Remove the write protect check altogether, and rely on the drive to do it.
1995-03-25 19:45:18 +00:00
12a1b9ad67
Add a rogue entry for the ANRITSU DMT780.
1995-03-25 18:41:42 +00:00
ff6c206c3f
Use void* rather than caddr_t in many places.
1995-03-25 00:00:53 +00:00
911fbf48fa
fix syntax error. Andreas Gustafsson <gson@clinet.fi>
1995-03-24 20:17:15 +00:00
cba4b405e4
don't let args default, return values, add protos
1995-03-24 15:29:46 +00:00
990077ba88
Don't bother with DIOCWLABEL.
1995-03-23 12:13:37 +00:00
06d0a67a07
Check for read-only media in open(), not write().
1995-03-23 12:11:07 +00:00
d21add8356
Revert cdsize() to do nothing.
1995-03-23 11:51:22 +00:00
4712cd33dc
Rearrange DIOCWDINFO a little; closer to wd.c.
1995-03-23 11:43:09 +00:00
562ca7760b
Fix typo.
1995-03-23 11:37:51 +00:00
02df08a47e
Allow DIOCWDINFO even if label is not `writable'.
1995-03-23 11:33:18 +00:00
331f0252c6
Fix probing of slave devices and remove unneeded ffs()'s
1995-03-21 14:05:28 +00:00
8193ffc379
Add support for PAS 16 basic
1995-03-15 18:45:58 +00:00
af46d07f24
fix compilation error. don't bother checking for IRQ2
1995-03-15 16:43:09 +00:00
36fa07bde5
Fixes defect port-i386/860 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. Kernel will not link with only ProAudio Spectrum driver
specified.
1995-03-14 18:43:19 +00:00
f3226ad49e
Fixes defect port-i386/864 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. pas.c doesn't recognize ProAudio Spectrum 16 Basic card.
1995-03-14 18:41:36 +00:00
37c67f3481
Turn off two diagnostic printfs by default.
1995-03-14 02:35:11 +00:00
7ce1465911
Fix SB8 playback. From David Gluss <david@pure.com>
1995-03-13 14:37:12 +00:00
1c9582b63e
Add IRQ 9 as a valid IRQ
1995-03-13 14:29:11 +00:00
f6589edbc7
spaces -> tab
1995-03-09 02:20:34 +00:00
83fffa3985
Cleanup for SB16 (From Jan Sparud)
1995-03-08 18:27:35 +00:00
e203e49ef5
Correct spelling of `fictitious'. Add patterns for optical memory devices.
...
From Alistair Crooks.
1995-03-07 21:46:06 +00:00
a55b765dd3
some cleanup..
1995-03-02 09:12:27 +00:00
a44a276543
from jason thorpe: add ccdclose(), make it work with the MI scsi code,
...
and add knowledge of i386 disk device names (XXX).
1995-03-02 06:40:38 +00:00
f694af6712
don't overload buffer structs; allocate and use a 'super-struct' instead.
1995-03-02 06:38:11 +00:00
e3c2563328
Fixup (c)'s and ids.
1995-03-01 11:34:02 +00:00
2ef7b2e7db
new arcnet (2060) device from is@Beverly.Rhein.DE (Ignatios Souvatzis)
1995-02-28 22:03:59 +00:00
63d3904bce
Use irq directly not as a mask
1995-02-28 21:47:42 +00:00
8f6f7fb7c9
use a buf-within-struct to avoid overloading b_pfcent.
1995-02-27 19:31:00 +00:00
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
389584724a
Support for uVAXII, new tmscp driver added.
1995-02-23 17:53:16 +00:00
2986fc2fd0
Be less picky about revision numbers for some broken devices.
1995-02-22 19:32:33 +00:00
559df5705c
PSS driver; needs testing with config.new
1995-02-21 04:15:03 +00:00
39b8de8e12
Driver for Windows sound system; not extensively tested
1995-02-21 02:28:42 +00:00
32eec53a2d
SoundBlaster driver for SB, SB16 and SBPRO
1995-02-21 02:28:06 +00:00
a70ae7273c
PAS driver; uses SB emulation for now
1995-02-21 02:27:18 +00:00
977594d1a9
Driver for ad1848 codec
1995-02-21 02:26:39 +00:00
1f5bdc75a9
New audio subsystem
1995-02-21 01:35:58 +00:00
8b834a58ca
Display more information when we get bogus data off the card.
1995-02-19 18:05:45 +00:00
0f894be19c
Rearrange epintr() to insure proper edge-trigger of the interrupt latch.
1995-02-19 06:13:53 +00:00
431121d46f
Fixes for new config.
1995-02-13 00:44:21 +00:00
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
e560d77223
Another Maxtor botch.
1995-02-09 10:23:14 +00:00
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
d8743f51a2
Add Exabyte 8200 to the list.
1995-02-01 09:37:54 +00:00
c937d3b9f2
Patch from Wolfgang to fix a missing spl.
1995-02-01 09:32:45 +00:00
52bacd79d6
Fix invocation of scsi_scsi_cmd(), per John Kohl.
1995-01-30 15:54:42 +00:00
1076165d07
All revisions of the TDC 3600 are rogues.
1995-01-30 15:39:33 +00:00
7639253b70
Finish last change.
1995-01-30 11:50:23 +00:00
321b00bd07
Some drives don't grok START with LoEj=1, either.
1995-01-30 11:47:56 +00:00
0ece1143f6
Set the LoadEject bit when issuing a START.
1995-01-30 11:37:17 +00:00
9085638020
Some devices really do require the START before the PREVENT. This makes no
...
sense.
1995-01-30 11:34:25 +00:00
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
87ed227cb4
include files from the correct places.
1995-01-27 05:44:29 +00:00
1611df6ae0
Update copyrights.
1995-01-26 12:05:49 +00:00
b76a328caa
Redo the `wait for spin up' code. The Mach 3 method clearly doesn't work.
...
Also, rearrange the first open sequences a bit; SDEV_OPEN is no longer magic.
1995-01-26 11:56:51 +00:00
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
95afef4f1d
kill _PATH_VNTAB; it's no longer used by anything.
1995-01-25 04:46:30 +00:00
66785ec427
Clean up deleted files.
1995-01-25 04:45:41 +00:00
d9f7c9f9be
vn -> vnd renaming, for consistency
1995-01-25 04:45:38 +00:00
726fa4e94f
Do the PREVENT before the START.
1995-01-23 18:17:22 +00:00
feb5b29596
Remove old, misleading comment.
1995-01-23 17:56:26 +00:00
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
3dddacd1ce
Rearrange tests so `offline' has higher priority than `out of paper'.
1995-01-22 00:12:39 +00:00
68c1a35cd9
Initialize host_stat and target_stat properly.
1995-01-18 04:20:16 +00:00
52f079131b
Incorporate recent changes from Wolfgang. Recognize the 815.
1995-01-16 21:48:35 +00:00
a6e7fe0d2a
If the disk reports a block size of 0, assume it really meant 512.
1995-01-16 21:40:17 +00:00
4a1e51751b
Trivial simplification.
1995-01-16 21:34:10 +00:00
e71e917e9d
Remove unused macros.
1995-01-16 21:31:34 +00:00
85532dd4ce
Don't clear the debug flags when copying the prototype scsi_link.
1995-01-16 21:13:40 +00:00
fcdbd2bd7b
Remove outdated comment.
1995-01-16 10:36:26 +00:00
87d587e640
Simplify some sanity checks.
1995-01-13 14:46:44 +00:00
28775a6a5d
Add a DIAGNOSTIC check.
1995-01-13 14:38:13 +00:00
1e5cd9212d
(Almost) allow sector sizes other than 512 bytes. Reduce some expensive operations.
1995-01-13 12:30:59 +00:00
7650bd97fc
Always boundary check I/O.
1995-01-13 10:46:32 +00:00
0033c975c6
Fix another bug in the DMA code.
1995-01-13 10:22:58 +00:00
4abdb375bc
Minor rearrangement.
1995-01-13 09:40:21 +00:00
c2bc310a37
Change the way sc_skip is used. Fix a bug in the (incomplete) DMA code. Add a
...
new sc_blkno (which will be useful later).
1995-01-13 08:58:16 +00:00
83a1c4799e
Add two more broken devices.
1995-01-12 10:25:44 +00:00
0a22930d97
Explicitly test the RXRDY status bit on incoming characters.
1995-01-11 09:56:40 +00:00
06b0414491
Actually, do the ID reset in elink_reset().
1995-01-07 21:37:54 +00:00
37e16c5747
Don't print line numbers in most of the diagnostics.
1995-01-07 06:49:35 +00:00
d4f91d51a9
Fix a race condition between normal I/O and wd_get_parms().
1995-01-07 03:07:22 +00:00
7f61bec5cd
Cosmetic changes, to look more like the new esp.c will.
1995-01-07 01:51:07 +00:00
ba288b4ae1
Do the reset in the individual drivers, not in elink_idseq().
1995-01-06 21:41:26 +00:00
290ed068ab
Remove many of the `static's, to facilitate debugging.
1995-01-04 09:02:32 +00:00
6125e1b551
Fix oversight in previous.
1995-01-04 00:47:53 +00:00
9e499d41b3
\
...
These files have been 99% rewritten from the original ast driver. Add an
appropriate copyright notice.
1995-01-03 22:38:54 +00:00
0349c5b9e0
Add a multiplexer for BOCA serial boards.
1995-01-03 22:26:36 +00:00
09834a5bd3
This is correct according to the docs on both cards.
...
Doesn't seem to make any difference to the known problems though.
1995-01-03 05:04:04 +00:00
b6c8a9a4e9
Update intr_establish() prototype.
1995-01-03 03:14:35 +00:00
93a0c4a258
Add interrupt sharing types.
1995-01-03 01:42:11 +00:00
b5cf1b5ddd
Add interrupt sharing types.
1995-01-03 01:30:14 +00:00
326830c1ba
Use direct config for subdevices.
1995-01-02 22:27:46 +00:00
e148dc7a64
Move setting of sc_maddr so soft config works.
1995-01-02 22:01:05 +00:00
a774fa6fe5
Use soft configuration when possible.
1995-01-02 21:57:04 +00:00
3a967fcbb6
More cleanup.
1995-01-02 21:27:27 +00:00
72dec3b548
Various cleanup.
1995-01-02 20:54:01 +00:00
3a74796b3e
Need isareg.h.
1995-01-02 20:39:35 +00:00
894bb9145f
Use soft configuration where possible.
1995-01-02 20:32:55 +00:00
2d5b04744a
Don't assume ia_maddr is in the hole.
1995-01-02 20:06:29 +00:00
dff292c275
Put Dan's broken tape drive in The List.
1995-01-01 11:37:03 +00:00
76b0b02cc3
Fix non-serious typo.
1994-12-31 05:34:00 +00:00
bfd9901daf
Fix some oversights in the debugging code.
1994-12-30 05:33:06 +00:00
d78ddddef6
Update the rogue entry for ancient drivers to match reality.
1994-12-30 05:23:49 +00:00
6e9d6a0d75
And a little better...
1994-12-30 05:20:22 +00:00
0a83cd8c57
Deal with short inquiry response a little better.
1994-12-30 05:14:52 +00:00
5d3bd57538
Fix a couple of things in the sense printing code.
1994-12-29 13:49:57 +00:00
f2909dc62b
Increase the st_space() timeout.
1994-12-28 19:55:50 +00:00
8fd135209c
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 19:42:47 +00:00
262b425866
temporary warning until I get new docs.
1994-12-28 16:47:50 +00:00
a596d50f29
various cleanups for -Wall, suggested by James Jegers.
1994-12-24 14:05:51 +00:00
ce06e718ad
Fix flags to isa_dmastart().
1994-12-17 18:45:11 +00:00
3e7afdbe8a
Remove DIOCSBAD handling. It's not actually handled, so why recognize it?
1994-12-16 04:38:30 +00:00
a395d884d5
Remove extra arg to d_open and vn_open().
1994-12-14 19:09:13 +00:00
ca65f2ce5d
Remove dkbad.h.
1994-12-14 15:17:22 +00:00
e694663b46
Make the diagnostics less cryptic.
1994-12-12 04:43:51 +00:00
3e4a358e28
Patch from Thomas Eberhardt to make PCnet-32 chips work.
1994-12-12 04:39:52 +00:00
303841c92e
3c509 fixes to avoid adapter getting stuck in high traffic conditions.
...
I don't particularly like the fixes, but at least now the 3c509 never
gets stuck. On the other hand, performance still sucks in some cases.
1994-12-10 14:52:02 +00:00
793e542f89
Fix format of attach message.
1994-12-10 05:55:26 +00:00
50c5dd6f0d
fix problem with disconnects (Ralph Campbell)
1994-12-05 19:11:12 +00:00
ba0ac0e803
added missing #ifdef DEBUG
1994-12-01 16:41:05 +00:00
1b372b7e96
Remove some redundant code.
1994-12-01 13:07:28 +00:00
0109779d43
Remove unneeded override of SCSI_NOSLEEP.
1994-12-01 12:45:25 +00:00
c1cbd9c635
Set UIO residual count.
1994-12-01 12:36:35 +00:00
71ab8bb627
Always set the device number correctly, even though we don't need it.
1994-12-01 12:26:37 +00:00
d18cbacd88
Redux.
1994-12-01 12:12:08 +00:00
1066219897
Uncomment call to scsi_user_done(), and remove a duplicate biodone() (and
...
another si_free()).
1994-12-01 12:04:43 +00:00
a10cbd7179
Remove the silly statically allocated array, and simply malloc the data
...
structures as needed. Also, put the buf in the malloc()ed area. Remove a
duplicate si_free() (though this was harmless before).
1994-12-01 11:53:56 +00:00
211b002017
Ignore ERR during diagnostics.
1994-12-01 10:45:26 +00:00
867ebf1d84
Clear the controller active flag after a timeout.
1994-11-30 02:32:03 +00:00
5584ff927f
Don't stall the queue on CHECK SENSE if we get a reselect while selecting.
1994-11-30 02:08:01 +00:00
639a64de08
Fix a null pointer reference.
1994-11-29 21:35:13 +00:00
51bed8d804
Add an assertion mechanism to check for more abnormal conditions.
1994-11-29 21:29:56 +00:00
58cb5339d6
For consistency...
1994-11-29 20:57:28 +00:00
41b26a6dfd
Handle BUS FREE phase a little differently, to get better error detection. Other
...
cleanup.
1994-11-29 20:08:27 +00:00
bb90feebac
Disable debugging breakpoints by default.
1994-11-29 17:56:49 +00:00
5ac2484d95
* Redo most of the message and phase state machines. Multiple pending
...
message outs should now work correctly (including retransmissions).
Multiple messages ins should be more efficient. Missing REQ after
reselection phase should now (correctly) cause a wait with ENREQINIT
set.
* Abstract out the reselection out sequence, and use it directly to
get sense info. (This is somewhat faster than the generic done/sched
sequence.)
* If there are no ACBs available, wait interruptibly for one.
* Leave the interrupt registers alone during message in/out; just
watch for phase change. Don't (incorrectly) reenable interrupts
during data in/out; defer that to aicintr().
* Handle command pointer per SCSI 2 spec.
* Other minor coding improvements.
1994-11-29 17:50:39 +00:00
fcf0991366
new asc.c from Ralph Campbell
1994-11-28 19:05:54 +00:00
6a2c060851
fix unary plus typo :-)
1994-11-25 23:19:03 +00:00
299c14af0c
New handling of pte:s for physio.
1994-11-25 19:09:31 +00:00
cba32aa25f
Minor update for new autoconfig.
1994-11-25 08:17:21 +00:00
0649f37219
Officially credit Onno.
1994-11-23 22:00:08 +00:00
2058abab15
Forgot to commit this as part of the LBA changes.
1994-11-23 07:56:52 +00:00
cc44b4600c
There's no point in bothering to unlock what we didn't lock.
1994-11-23 07:54:15 +00:00
6dda55519e
Fix an outdated comment.
1994-11-23 03:11:01 +00:00
a3fc466734
Use logical block addressing if available. Be a little more careful about
...
maintaining timeouts. Clean up wddump() a bit.
1994-11-23 01:35:43 +00:00
525fc36e19
Implement 32-bit reads and writes, but for now assume 16-bit mode.
1994-11-22 10:20:16 +00:00
3a99ddf172
Add a missing newline in some error messages.
1994-11-22 09:36:56 +00:00
db3bde9525
Implement EIDE multi-sector PIO and DMA modes, based on code from Onno van
...
der Linden. Also, various structural cleanup, and fix two bogons that crept
in, and remove all of the old clustering nonsense.
1994-11-22 09:33:59 +00:00
1e01855683
Minor fix to debugging code.
1994-11-22 05:50:48 +00:00
85826f0fbe
Fudge a couple more fields for ancient disks.
1994-11-22 05:39:16 +00:00
e1a7bac628
Change some constant names, etc., to better match the ATA spec.
1994-11-22 05:34:49 +00:00
95edd299b0
Add still more locking.
1994-11-22 03:23:49 +00:00
284d17e8f0
Complete last change.
1994-11-22 00:14:24 +00:00
0c36dd6762
C botch repair from bostic
1994-11-22 00:05:36 +00:00
c81c637ee3
Return EIO when the drive is empty.
1994-11-21 11:37:26 +00:00
7a1dcbfac6
Clean up open and close routines somewhat.
1994-11-21 11:28:47 +00:00
fd32202948
Replace dev_unit with device_softc in scsi_link. Change argument to foostart()
...
to void*.
1994-11-21 10:39:09 +00:00
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
9a3840f2f0
Stylistic changes.
1994-11-18 22:25:12 +00:00
61800cfa25
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 22:07:32 +00:00
35cdd801e6
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 21:57:40 +00:00
38483bbbf0
Enough Chinese torture already
1994-11-15 23:00:23 +00:00
393ee3693c
Surrounded call to debug routine with #ifdef DEBUG
1994-11-15 18:59:40 +00:00
a2727ec558
Check IRQ 9, not IRQ 2.
1994-11-15 00:00:24 +00:00
b341f7a8c0
Map IRQ 2 to IRQ 9.
1994-11-14 23:58:56 +00:00
c2c3dce760
added extra argument to vn_open
1994-11-14 06:00:10 +00:00
21e911d911
Update for new autoconfig.
1994-11-07 09:03:48 +00:00
2a9b6f7959
Fix stupid bug in last change.
1994-11-04 23:30:15 +00:00
4ec6774e12
Add a simplified version of wdcommand() that can be used in some cases.
...
Avoid needing a wd_softc inside wdprobe().
1994-11-04 23:18:06 +00:00
3df6bf0c0e
Trivial stylistic changes.
1994-11-04 21:32:23 +00:00
854d8d96dc
Rearrange slightly.
1994-11-04 19:25:34 +00:00
cfc4633919
Remove outdated comment.
1994-11-04 19:17:47 +00:00
b7acf321cd
No longer needs icu.h.
1994-11-04 18:59:34 +00:00
195574a7de
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:57:15 +00:00
29414c5a0a
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:34:50 +00:00
f8183b2d0e
Make a wrapper match function to check the bus and device numbers, rather
...
than insisting that every driver do it.
1994-11-04 09:42:18 +00:00
9af4fee97d
Use kvtop() rather than address arithmetic in a couple of places.
1994-11-04 08:55:53 +00:00
1948fcb3fa
Add a new function config_scan(), which just calls a particular function
...
with each plausibly cfdata, ignoring the priority mechanism completely.
1994-11-04 06:40:11 +00:00
2e8ae560f6
Commit incest with the config system for this one specific case.
1994-11-04 03:57:32 +00:00
fa769b0e97
Set ia_irq correctly.
1994-11-04 02:55:32 +00:00
7773b21b74
Correct an oversight.
1994-11-04 00:53:06 +00:00
d4dd538296
Oops; forgot isacd.
1994-11-04 00:07:39 +00:00
3fca7e771a
New version using standard config_*() functions.
1994-11-03 23:53:19 +00:00
ebbdd6473b
Update to match autoconfig code.
1994-11-03 23:26:03 +00:00
19fc9d55c8
*intr() arg does not need to be void*.
1994-11-03 23:23:38 +00:00
d0163400d1
Update to match autoconfig code.
1994-11-03 23:21:24 +00:00
54cc63645d
Update to match autoconfig code.
1994-11-03 23:08:27 +00:00
d23d1e83dc
Use indirect config for subdevices, and add dkdrivers where missing.
1994-11-03 22:55:58 +00:00
94cde915db
Rename pciprobe() to pcimatch(), and move it to pci_machdep.c.
1994-11-03 22:27:16 +00:00
e06bd72a85
Always use direct configuration.
1994-11-03 22:15:19 +00:00
d8561ad477
Oops; update scsibusmatch() arg list.
1994-11-03 22:09:00 +00:00
ef0c18e1cf
Always use direct configuration for SCSI devices.
1994-11-03 22:05:08 +00:00
54608f7ea0
Remove a couple of i386-specific hacks, and make a couple of others #ifdef
...
CONFIG_INDIRECT instead.
1994-11-03 20:24:21 +00:00
283745574f
Commit this, though it really does need work.
1994-11-03 16:55:57 +00:00
1c76bf7aa1
Add a nullcnpollc(), for people who don't want to deal.
1994-10-30 22:16:37 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
9769a6a6f7
Various:
...
* Forget all cached info when opening a new disc.
* If the disc is removed, flush the buffer queue rather than stalling it.
* Set the default label after getting the disc size, and fill in the info
for RAW_PART also.
* Change another use of the unit number to a softc pointer.
* Use a dkdevice to hold the label and open partition masks.
* Force the partition offset to 0 for RAW_PART, regardless of the label.
* Nuke MCDPHYS() and MCDREADRAW; they had a silly bug that caused the code
to not work, and they aren't useful anyway.
Some other minor cleanup.
1994-10-28 23:39:59 +00:00
022ee8f7fe
new RCS ID format.
1994-10-27 04:14:23 +00:00
5a13863a4b
Default to decent performance.
1994-10-27 02:04:18 +00:00
fc67924047
Merge changes from Wolfgang Stanglmeier's 941012 release.
1994-10-27 02:02:00 +00:00
a63beafc2b
new RCS ID format.
1994-10-26 21:08:38 +00:00
556a119342
Implement *cnpollc().
1994-10-26 18:06:30 +00:00
511d2732a3
Implement cnpollc().
1994-10-26 17:56:53 +00:00
d62187c043
new RCS ID format.
1994-10-26 08:01:33 +00:00
260ddbefb7
Rearrange ed_init() slightly, to better correspond to the National manual.
...
Optimize ed_rint() slightly in the case of multiple packets. (Avoid an outb
and an inb for each packet).
1994-10-23 23:24:56 +00:00
603fe7b5a6
Slight optimization.
1994-10-23 21:38:00 +00:00
0114159848
Fix the packet length correction for buggy chips so that it actually works,
...
and always use it (otherwise short packets could still be corrupted). Also
produce a diagnostic message if DIAGNOSTIC, since it *is* a hardware bug.
Add an ED_PAGE_SHIFT constant, and use it, to avoid GCC doing horrendous
things with divides and multiplies.
1994-10-23 21:22:13 +00:00
28cbceeec7
Make this more likely to work.
1994-10-23 19:24:01 +00:00
e5d974c51f
First cut at making user-level SCSI commands work. This is untested.
...
Partly from John Brezak.
1994-10-20 20:31:23 +00:00
3e30a415ae
Be careful not to stack multiple timeouts.
1994-10-20 19:22:01 +00:00
4d072c5435
Remove the local timeout mechanism, and just use explicit timeout()/untimeout()
...
calls.
1994-10-20 18:37:45 +00:00
c11a06cbc2
Always set d_secsize to 512 for now.
1994-10-20 17:03:09 +00:00
b8ab5f65d1
Back out change to print geometry from label at boot; can't do this reliably.
1994-10-20 16:54:44 +00:00
0862d07daf
Don't switch to single-sector mode just because we got a corrected error.
1994-10-20 16:36:21 +00:00
d4153fff4d
Rearrange wdcstart() in a more logical fashion, and eliminate many redundant
...
calculations. Also, speed up bad block searching a little.
1994-10-20 16:19:08 +00:00
7d391c250d
Fix minor omission.
1994-10-20 14:10:18 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
bb12b9c8a2
Trivial stylistic changes.
1994-10-20 14:05:08 +00:00
caaeda044b
Similar changes to sd.c.
1994-10-20 14:03:38 +00:00
b1568d887e
Use the block size in the label in most cases.
1994-10-20 13:50:38 +00:00
cae71ba91d
Various changes:
...
* Add a dkdevice; move sc_*openpart, sc_label, and sc_cpulabel into it.
* Turn sc_wlabel into a flag, and don't set it automatically in DIOCWLABEL.
* If there is no label, disallow all I/O except to the raw partition.
* Don't allow I/O to `unused' partitions.
* Beginnings of support for block sizes other than 512 bytes.
Other minor changes.
1994-10-20 13:44:46 +00:00
d5b3572f5c
Various changes:
...
* Get rid of unused `partflags'.
* Use dk_openpart, and remove `openparts'. Also, allow an open on both
the block and characters devices at the same time.
* If there was a label, print the geometry from the label at boot time.
* Turn `wlabel' into a flag, and *don't* set it automatically in
DIOCWLABEL; disklabel(8) does that.
Other minor changes.
1994-10-20 13:33:36 +00:00
8ae8b4ab29
Bug fixes from Rafal Boni:
...
* Set promiscuous mode flag before configuring card, so it actually works.
* Handle failed TDR commands correctly.
* Remove some apparently defunct and bogus code.
(This driver needs more work.)
1994-10-18 13:40:30 +00:00
320359f8e2
change, requested by Jarle Greipsland
1994-10-17 00:08:29 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
6f5794ecba
Fix bugs in dealing with odd-length mbufs in ed_pio_write_mbufs(). From
...
John Hood.
1994-10-14 13:05:13 +00:00
7c01f7ce51
Changes from DG to deal with some old chips that corrupt the packet length.
1994-10-12 13:42:00 +00:00
4252ca6644
Correct multicast filter calculation.
1994-10-09 21:19:04 +00:00
236f105ccd
Remove unneeded #includes.
1994-10-09 15:06:23 +00:00
5a58654e8a
Fixed bugs according to old memory system.
1994-10-08 15:46:15 +00:00
b90985ee3d
Don't poll the BUSY bit until the SDH register is set.
1994-10-07 11:34:52 +00:00
1eaa03e7dc
Fix initial allocation of dev array, and simplify the code
...
slightly.
1994-10-07 09:08:29 +00:00
86e7908a72
Make some comments more clear.
1994-10-01 07:19:32 +00:00
f7b0f89811
Various minor changes to sync better with DG's version.
1994-10-01 07:13:32 +00:00
6ddbe860c2
Update from Wolfgang Stanglemeier.
1994-10-01 06:27:56 +00:00
0e28696023
Add IO_PPI.
1994-10-01 03:52:46 +00:00
e32c213d35
Add IO_PMP[12] and IO_PMPSIZE.
1994-10-01 03:48:49 +00:00
b7cc64e049
Check the SB Pro IRQ and DRQ correctly. From Jason Thorpe.
1994-09-16 23:48:22 +00:00
c7003d37d3
Only reset FIFO if changing baud rate. From John Kohl (slightly edited).
1994-09-16 02:50:39 +00:00
8dd2c63b08
Turn off the delay debugging messages again.
1994-09-12 20:29:08 +00:00
584de55692
Missed an iobase that should be u_short.
1994-09-05 00:21:40 +00:00
5aa2f1e6bb
remove an un-aligned access
1994-08-30 17:01:57 +00:00
a13c1b15cc
Minor.
1994-08-26 12:43:17 +00:00
de20d2cf67
Re-enable EISA reset code -- definately needed now. do RX_DISCARD_TOP_PACK
...
before leaving splhigh(), to give incoming packets a better chance.
1994-08-26 12:11:44 +00:00
6c2b49032b
fix debugging stuff, from dean
1994-08-25 20:18:25 +00:00
f32f66a23b
fix (bogus) default ioctl return.
1994-08-24 16:49:16 +00:00
5e4a51278b
Set the FIFO threshold based on the receive speed, per Mark Weaver.
1994-08-24 07:25:18 +00:00
c4eac0f370
Some cleanup, checked by Dean.
1994-08-23 23:40:55 +00:00
8ac5e10c5d
Various code cleanup.
1994-08-23 19:30:12 +00:00
666f228bab
add `eg' driver for the 3c505 by <dean@fsa.ca>
1994-08-23 17:59:33 +00:00
996b2b5c54
Disable EISA reset, for now.
1994-08-22 21:53:23 +00:00
71c5da7bfb
Fix typo in WDCS_BITS.
1994-08-22 21:43:35 +00:00
8b8390a4bb
Look for MDMBUF in cflag, not lflag.
1994-08-21 15:04:37 +00:00
256353ef62
multicast
1994-08-17 06:04:49 +00:00
5f27568164
Eliminate struct pte and struct pde.
1994-08-15 14:46:45 +00:00
36975ff354
Don't use altsts. Sigh.
1994-08-15 08:22:20 +00:00
a618f9d915
Slight optimization, and don't go bonkers if one of the sub-devices is not
...
configured.
1994-08-14 14:13:25 +00:00
a570fcd929
Re-enable EISA reset.
1994-08-14 09:43:59 +00:00
cd2f7cc8a0
Clean up a little.
1994-08-14 09:24:55 +00:00
06476a4e53
ccdevsw --> cdevsw
1994-08-14 07:41:08 +00:00
692c724215
un-aligned access is not cool on some processors
1994-08-12 08:57:18 +00:00
da79c879cd
On probe or open, retry the READ CAPACITY once if the drive reports NOT READY.
1994-08-11 23:51:26 +00:00
3c3258eb6d
Make this work.
1994-08-11 04:54:13 +00:00
55b11feb0a
Update some comments.
1994-08-10 04:37:52 +00:00
8dbfcf9e2e
Add NCR 53c8XX driver, originally from Wolfgang Stanglmeier.
1994-08-09 22:20:44 +00:00
3e685aec5c
Change ST_Q_NEEDS_PAGE_0 to something more generic.
1994-08-09 18:50:17 +00:00
6df721be97
Add PCI autoconfiguration support.
1994-08-09 00:47:46 +00:00
061c42c22d
Minor update.
1994-08-08 07:09:31 +00:00
59de58a39b
Count up the silo overflows and only log a warning at most once per minute.
1994-08-07 11:27:51 +00:00
9c8afcf191
Avoid using DFIFOHF, which doesn't exist on 6260 chips. Turn off
...
AIC_USE_DWORDS by default.
1994-08-07 10:51:40 +00:00
b0db502d9c
Remove diagnostic.
1994-08-07 10:49:06 +00:00
d9a996a92e
Add multiplexer for RT 4-port serial cards.
1994-08-07 10:45:53 +00:00
b6e9bf14c8
Simplify the DEPCA memory test, and fix a problem with using the alternate
...
PROM address.
1994-08-07 00:56:04 +00:00
ebd23fe5e0
cleanup
1994-08-06 23:19:39 +00:00
558c00c001
Fix spelling of `STEREO'.
1994-08-05 22:56:19 +00:00
cefefb25ca
cleanup, working 32 bit IO on the 3c579, and memory alignment of insl/insw
...
for better performance.
1994-08-05 21:16:33 +00:00
b5c5c47f92
Obey the command queue size for the controller.
1994-08-04 09:52:47 +00:00
9d7eefb176
Change iosize to 16.
1994-08-03 09:17:12 +00:00
a17171c0a2
Add a missing splx() and increase the reset delay during probe, as suggested
...
by Juergen Keil. Add a diagnostic message if the controller info is not what
we expect.
1994-08-03 08:57:59 +00:00
8026fb53f2
Initial VAX port merging.
1994-08-02 20:18:46 +00:00
45b0217c1e
Fix up u14_find() a bit; mainly, don't include a DRQ for the 34f.
1994-07-31 19:21:40 +00:00
a00c5fdb91
Add some missing newlines in the attach messages.
1994-07-31 18:25:50 +00:00
8a9df6389d
Bug fixes from Mark Weaver.
1994-07-31 11:34:38 +00:00
53f3b61cdc
Redux.
1994-07-28 19:57:31 +00:00
c405e84a24
port --> iobase
1994-07-28 09:50:33 +00:00
d02e11d543
Make the EISA reset code like the other drivers.
1994-07-28 08:44:47 +00:00
fb500c4d07
Redo some of the EISA config stuff.
1994-07-28 02:39:21 +00:00
c1a5741a3b
Remove unused macros.
1994-07-27 15:02:59 +00:00
5e04cfb942
Fix typo.
1994-07-27 13:24:17 +00:00
4ac4810048
Normalize.
1994-07-27 13:14:14 +00:00
1939acdbd2
Fix the DMA setup.
1994-07-27 13:10:33 +00:00
1a9c6d05a3
Enable IRQ probing, and fix the DMA setup.
1994-07-27 12:57:02 +00:00
dffcd8ea8d
Enable IRQ probing.
1994-07-27 03:09:21 +00:00
16878bf2f9
Enable IRQ probing.
1994-07-27 01:50:57 +00:00
35b4db3030
Add IRQUNK.
1994-07-27 01:50:15 +00:00
863c736e39
Normalize label handling.
1994-07-26 19:39:19 +00:00
b5ce4d0cdd
Normalize label handling.
1994-07-26 19:36:06 +00:00
a18c0c0d83
Look for errors in the right place in a transmit descriptor, and count
...
collisions.
1994-07-25 22:54:58 +00:00
220a5a5095
Add missing splbio()s, pointed out by Gene Stark.
1994-07-25 04:29:56 +00:00
1c46c460ee
Return EINVAL if the requested transfer size is weird.
1994-07-21 23:44:16 +00:00
7fca65c005
Remove something which cannot possibly be correct.
1994-07-21 04:15:05 +00:00
37dc11891c
Fix a typo.
1994-07-21 03:40:53 +00:00
4469aea569
Do the EISA probing a little differently.
1994-07-21 03:30:18 +00:00
3013b3fdbc
check if eisa card exists before tromping on dma
1994-07-21 02:51:53 +00:00
cc9da7d69f
Fix failed probe message.
1994-07-16 13:45:59 +00:00
e88e13f3bb
Fix a bogon relating to >16-bit addresses that I introduced. Fix up BPF
...
support for received packets.
1994-07-15 21:20:48 +00:00
db0e00db86
Clean up a bit.
1994-07-10 17:53:12 +00:00
668c4747b3
Rename flags; clean up a bit.
1994-07-05 21:20:20 +00:00
b10a5d5fac
change to support other MAXPARTITIONS vals aside from 8
1994-07-04 20:39:46 +00:00
3214723fcf
These should have been the 4.4Lite versions. duh.
1994-07-02 06:03:47 +00:00
801d30952a
ISDEBUG --> LEDEBUG, and fix some ugly code.
1994-07-02 04:13:16 +00:00
943735dc41
modifications to the threshold and nicer error checking from christos
...
and .. splhigh() around insw/outsw code.. yetch
1994-07-01 23:08:11 +00:00
73aca695ac
Make sure we don't leave the interrupt masked after some errors.
1994-07-01 21:38:19 +00:00
2f609096e4
Inline le{rd,wr}csr().
1994-07-01 21:34:40 +00:00
bf74fc41d1
Add prototype.
1994-07-01 21:33:20 +00:00
f62bc452ca
Correct some comments.
1994-07-01 21:31:14 +00:00
66e72cdf4b
Rename is to le, and add support for some models of DEPCA.
1994-07-01 20:25:25 +00:00
fd7c79353e
knf
1994-06-29 23:32:42 +00:00
fccfa11af5
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:39:25 +00:00
cf92afd66e
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:29:24 +00:00
89e331dcad
new standard, minimally intrusive ID format
1994-06-27 19:40:57 +00:00
6f9db1ee2d
Concat disk driver moved from hp300/dev to here.
1994-06-24 14:11:02 +00:00
72679b6801
Fix a comment.
1994-06-19 03:29:37 +00:00
7d3285c3d4
resolve confusion over who owns the buf after calling scsi_scsi_cmd()
1994-06-16 15:57:39 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
72cf8eaa9d
kill some pre-lite code that was #ifdef'd appropriately
1994-06-14 00:25:43 +00:00
f4a9e46aaf
Fix unimportant typos.
1994-06-13 18:54:41 +00:00
ff9c5cdde5
Set `uio_procp' field in case we ever need it.
1994-06-09 20:00:13 +00:00
3b4b77ca23
Reverse sense of vfinddev().
1994-06-08 11:19:41 +00:00
bb4ba15c7f
Add (experimental) 24f handling.
1994-06-08 11:16:49 +00:00
00eb72f54b
two fixes from christos
1994-06-04 01:52:28 +00:00
9bc7771492
Allow the probe to succeed again on 445S cards.
1994-06-03 15:56:18 +00:00
6b63c739f3
bsd 4.4-lite pmax port as ported to NetBSD
1994-05-27 08:57:32 +00:00
37c76e16d1
Only print the blasted messages *once* per error.
1994-05-27 08:54:52 +00:00
377b097932
upgrade to bsd 4.4-lite code base. only mod is rcsids
1994-05-27 08:39:00 +00:00
30c08c899f
Copyright foo.
1994-05-25 20:41:53 +00:00
0645f8963f
Check the bus type, and don't attempt to enable the round-robin algorithm
...
on early boards. As suggested by Atsushi Murai.
1994-05-24 13:39:15 +00:00
a9376b883a
MIN --> min
1994-05-24 07:31:12 +00:00
ebcaebd335
MIN -> min, MAX -> max
1994-05-24 02:35:53 +00:00
cf1b01e3cc
provide upgrade notice
1994-05-24 01:05:33 +00:00
057dc4deec
quiet compiler warnings
1994-05-23 03:02:13 +00:00
e47989d1e5
turn off spontaneous printing of messages when DEBUG turned on
1994-05-23 02:33:23 +00:00
18dab72811
32bit eisa does not work now, do not even try
1994-05-21 05:34:02 +00:00
922959fd05
Reverse the order of disabling shared memory and turning off 16-bit mode
...
where necessary, per Steve Wallace.
1994-05-19 07:47:34 +00:00
949b970c95
Use ether_ifattach() rather than doing the same thing in each driver.
1994-05-13 06:13:43 +00:00
d023a319a4
Nuke some junk in scsi_link, as pointed out by Gordon.
1994-05-12 22:16:04 +00:00
7040f728a9
Fill in some more struct ifnet fields.
1994-05-11 12:09:17 +00:00
19017044cf
Get rid of the private vnread() and vnwrite(); they are the same as rawread()
...
and rawwrite().
1994-05-11 10:03:59 +00:00
02ec14c597
Add dummy *dump() routines.
1994-05-11 09:49:17 +00:00
ef8ba60d24
Device strategy functions return void again.
1994-05-11 04:26:17 +00:00
bd96a072fd
Nothing of consequence.
1994-05-11 02:28:42 +00:00
95faa87c60
remove union's from sense_data struct, conditionaly define RAW_PART
1994-05-09 07:40:47 +00:00
fcdc2b3f3f
Remove now-bogus cast.
1994-05-05 08:31:44 +00:00
5f478330e8
Remove now-bogus casts.
1994-05-05 08:31:00 +00:00
04df00527c
Retool the state machine is a sane way.
1994-05-05 08:26:13 +00:00
685508a6b4
Remove now-bogus cast.
1994-05-05 07:52:53 +00:00
a211907a8b
Remove now-bogus cast.
1994-05-05 07:41:44 +00:00
a0a7429482
lots of changes: prototype migration, move lots of variables, definitions,
...
and structure elements around. kill some unnecessary type and macro
definitions. standardize clock handling. More changes than you'd want.
1994-05-05 05:35:42 +00:00
a9c3f137b5
Don't frob the connector type if the card doesn't grok soft config.
1994-05-05 02:20:44 +00:00
e5c1d566ef
Really fix the Buslogic/DTC problem.
1994-05-03 20:53:54 +00:00
0ee51c2c8b
Forgot to munge the #includes in last commit.
1994-05-03 20:32:22 +00:00
884168ce49
Move beep junk to clock.c.
1994-05-03 08:23:55 +00:00
36a9bcce8d
Fix argument to aic_sched_msgout() is several places, and condense some code.
1994-05-03 08:20:43 +00:00
394be046a5
insw takes a word count
1994-05-02 06:37:10 +00:00
e0db92993a
change timeout/untimeout/wakeup/sleep/tsleep args to void *
1994-04-29 23:15:51 +00:00
39718a43cc
Enable/disable shared memory access on all WD/SMC boards. Add support for
...
software selection of AUI or BNC connectors using LINK0.
1994-04-28 04:53:09 +00:00
fc844e1797
Style nits.
1994-04-26 03:43:26 +00:00
62773fc6f8
Add Adaptec 6360 driver from Jarle Greipsland, with some changes by me.
1994-04-26 00:05:56 +00:00
0e689f0375
Fix uninitialized pointer, pointed out by Michael VanLoon.
1994-04-25 03:16:03 +00:00
efbbf1b09f
Deal with variable-length drives that don't specify a maximum block size.
...
c.f. SCSI 2 protocol definition.
1994-04-24 05:40:05 +00:00
30c24e4508
bit better now, fixes from me & charles. squishy squishy squishy. HI ADAM!
1994-04-24 02:48:10 +00:00
2f66816d8b
Rename two files.
1994-04-24 01:34:05 +00:00
84752ce046
Don't need isa.h.
1994-04-24 01:29:56 +00:00
0ef8000051
Some changes from Charles, Adam and Christos Zoulas.
1994-04-23 04:31:12 +00:00
eb036e74c5
Don't need isa.h.
1994-04-22 23:02:40 +00:00
221b25fd9d
Separate DMA functions.
1994-04-22 22:58:50 +00:00
160fbf23ec
Fix typo.
1994-04-21 04:26:37 +00:00
584cd2e4c9
Clean up the TUNE_1542 code.
1994-04-21 03:37:19 +00:00
245097a031
Fix return of I/O space size from wtprobe(), as reported by Rafal Boni.
1994-04-21 00:41:52 +00:00
689156a240
Change structure member names.
1994-04-20 22:39:33 +00:00
df873c8545
Maintain the xs free list with LIST_*().
1994-04-20 22:13:33 +00:00
893be926ec
Use TAILQ_*() to maintain the drive activation queues.
1994-04-20 07:23:52 +00:00
28aa66d455
update from hibler
1994-04-20 05:01:22 +00:00
0d93a0839c
queue up 8 mbuf chains once again, perhaps this will help?
...
read packets of the card before attempting to transmit (should improve speed)
1994-04-18 12:40:39 +00:00
4816eedf31
first attempt at EISA 32bit IO support. it still doesn't work so it's
...
disabled.
1994-04-16 09:53:45 +00:00
8aca9c1cbc
support multicast and promiscious mode
...
correct mbuf queue bugs, cleanup some extra symbols
try to let link0/link1 change while running, will this work?
1994-04-15 10:51:28 +00:00
07b3588735
Patches from David Greenman to eliminate magic constants and add delays when
...
switching to and fro 16-bit access for 790s.
1994-04-14 03:54:07 +00:00
920c317ff9
deallocate mbuf cache on ifconfig down.
1994-04-13 06:09:00 +00:00
eee893f9ea
Various cleanup, but no functional differences.
1994-04-13 05:43:19 +00:00
49b3055feb
undo that last
1994-04-11 21:53:54 +00:00
34ac381d05
don't cdevvp() if a vnode for the dev already exists. Note that that's
...
conceptually icky; you end up ref'ing a 'real' vnode, and hence perhaps
tying down a file system; should be able to reference a 'fake' one,
but i doesn't appear save to cdevvp() if vnode for same dev is already
around... also, mark vfinddev()s XXX (for later).
1994-04-11 19:53:29 +00:00
e7eb2d4831
support multiple eisa/isa cards.
1994-04-11 11:09:00 +00:00
58dfc9dffc
Fix various types. Remove some outdated flags.
1994-04-11 03:53:58 +00:00
c01cb5c454
Fix various types. Remove some outdated flags. Actually sleep a bit if
...
there are too many commands pending on the controller.
1994-04-11 03:53:45 +00:00
8b10b2cd18
Combine scsi_start_unit() and scsi_stop_unit(), and increase the start
...
timeout (again).
1994-04-11 02:23:41 +00:00
e872e13605
allow MDMBUF flags to be set (oops)
1994-04-10 10:29:06 +00:00
17378eaf33
and fix the other case. ugly fix, but it works
1994-04-10 01:11:28 +00:00
f16c2e25f8
Add another rogue...
1994-04-10 00:07:02 +00:00
cabd481fa9
Don't print a duplicate message about stray interrupts.
1994-04-09 03:43:36 +00:00
mycroft