12bfe2e68e
Must change `u_long' to `u_int32_t' as Jason pointed out.
1995-11-29 22:03:53 +00:00
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
523c12167c
fix definition of nullcnpollc, and add a prototype for it.
1995-11-25 00:03:35 +00:00
540ab1b88d
since 'long's in this code are meant to be exactly 32-bits wide, use
...
'int32_t's instead, so that this code is usable on the alpha.
1995-11-24 23:50:51 +00:00
13bf4371ae
delete extra (blank) line in comment block
1995-11-24 23:45:40 +00:00
97fc3b8321
get size of softc right
1995-11-17 23:33:34 +00:00
d125a07adb
My previous changes broke the pcmcia support. For now assume that all non
...
PCI cards look identical to ISA cards.
1995-11-13 20:50:22 +00:00
7a68425190
Don't use the softc at probe time on pci devices because it has not been
...
allocated yet. Thanks Charles...
1995-11-12 20:55:26 +00:00
fbecb8d22b
Remove the gratuitous code to check for a disc at boot time.
1995-11-11 20:07:57 +00:00
e4c4e9cb07
Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition
...
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
1995-11-10 19:39:21 +00:00
ffa8bfeda1
pcidevs was changed
1995-11-10 19:36:29 +00:00
c3ae59171a
- pcidevs: add 3c590 and adaptec ultra
...
- aic7xxx.c: fix the probe routines to use pcidevs.h
1995-11-10 19:36:08 +00:00
f51faf62ac
Dynamic allocate uba_softc and interrupt vectors.
...
Allow for more that one uba.
1995-11-10 19:25:46 +00:00
d3c61be30b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 05:01:05 +00:00
38a7c4b007
Correct the format of some diagnostics.
1995-11-10 04:41:58 +00:00
d8f6a1896b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 04:30:36 +00:00
20783f6b85
Bring in several changes from the ccd:
...
* Be a bit better with prototypes
* Use struct dkdevice in vnd_softc.
* Prevent the unit from being unconfigured while open.
* Implement a simple locking mechanism and use it for sanity's
sake.
Still needs more work; needs to support disklabels and the like.
1995-11-06 20:28:09 +00:00
664cb04670
Fix a race condition where if a process is asleep waiting on an
...
exclusive lock of a ccd device while another process is unconfiguring
that same device, the first process would never awaken (unless interrupted).
1995-11-06 19:58:01 +00:00
f85819bc44
In ccdstart(), only translate the block number from partition-relative
...
to absolute if part != RAW_PART.
1995-11-03 02:35:54 +00:00
8d78a257c0
More rogues.
1995-11-01 01:15:07 +00:00
4671e1d753
Add coyright, id string; fix comments
1995-10-26 15:46:24 +00:00
c35fd76e91
Fix a comment
1995-10-26 15:38:45 +00:00
4ad1c05d71
DV_NULL should be DV_DULL.
1995-10-23 15:42:50 +00:00
bcff7be6b7
DV_DISK => DV_NULL (from Mike Long; PR#1607).
1995-10-22 20:45:07 +00:00
2f9169d20b
Correct NE7CMD_FORMAT command (from John Kohl; PR#1637).
1995-10-20 00:02:20 +00:00
cbef9e5129
Add missing spindle synch control, rotational offset, and RPM members
...
to the rigid geometry mode page. These missing members are at the
end of the page, in space wich was previously marked "reserved".
1995-10-15 23:32:02 +00:00
f096f370fb
Use SET(), CLR(), and ISSET() macros.
...
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
1995-10-15 19:43:04 +00:00
444e2789c6
Add quirk entries for Wangtek SCSI tapes. Also, add entry for
...
Tandberg 3800 (fixes PR#1592 - from Jochen Pohl).
1995-10-13 20:01:03 +00:00
89d4987e5d
Fix bad pointer deref, memory leak, and geometry calculation, pointed
...
out by Jochen Pohl in PR #1588 . Change the interleave index to an
array of ints rather than an array of chars to avoid losing in the event
one has more than 127 components.
1995-10-12 21:28:32 +00:00
dbce1a97aa
Add specs for ahc driver.
1995-10-10 12:16:54 +00:00
3450507404
Make sure we only schedule one timeout to refill the mbuf queue.
1995-10-10 03:11:28 +00:00
92221a1399
Return EINVAL if something other than a whole number of blocks is requested.
1995-10-10 02:52:56 +00:00
78bd894529
add prototypes for isr stuff fixes pr# 1284 and 1569
1995-10-09 15:19:58 +00:00
3973aeb080
fix hang bug from Ignatios Souvatzis <ignatios@theory.cs.uni-bonn.de>
1995-10-09 14:05:24 +00:00
b216bead49
Add an Adaptec 2940 driver, by John Aycock and Justin Gibbs, ported to NetBSD by Stefan
...
Grefen, with several bug fixes by me.
1995-10-09 09:49:30 +00:00
a1bc374083
Batting 1.000: fix a potential panic situation in ccdioctl() that can occur
...
if ccdinit() fails.
1995-10-09 05:37:57 +00:00
ab0109ad89
Fix up a couple of comments.
1995-10-09 05:21:09 +00:00
4e3112d39b
Add the partition offset to the block number in ccdstart() as opposed
...
to ccdstrategy(), and do it in a way that doesn't corrupt the block number
for residuals. (What was I _thinking_?!)
1995-10-09 01:45:34 +00:00
b8dcfbd303
Implement a simple locking mechanism and use it, for sanity's sake.
...
In ccdopen(), don't update the disklabel if any partition is already open.
Prevents race bewteen ccdstrategy() and ccdgetdisklabel().
1995-10-09 00:46:45 +00:00
9a79c5a043
Machine-independent RAM-disk driver.
1995-10-08 23:30:57 +00:00
85285f6ead
Add a shutdown hook.
1995-10-07 09:19:13 +00:00
476de93402
Remove `rc_font_ascent' from structure.
1995-10-05 13:17:51 +00:00
d40c1f54bd
Lock the underlying vnode around VOP_BMAP() and VOP_READ(). From John Kohl.
1995-10-05 06:20:57 +00:00
6a7edf0b56
Move font defs back into machine-dependent area (per Jonathan Stone).
...
Integrate patches from der Mouse (8-bit cleanliness, FULLSCREEN option,
SMALLFONT option).
The (MD) caller of rcons_init() is now responsible for initialising `rc_font'.
1995-10-04 23:57:17 +00:00
0e646ae994
Move RCONSOLE files here and rename option to RASTERCONSOLE.
1995-10-04 23:35:31 +00:00
86939fd839
Fix typo.
1995-10-04 00:35:07 +00:00
393a69d6db
Modularize the CCB/MSCP/ACB/ECB handling a little. No functional changes.
1995-10-03 20:58:56 +00:00
0bc6ad73eb
Fix an oversight in the minphys routine.
1995-10-02 16:48:36 +00:00
b5beeaaca9
Incorporate recent changes from Wolfgang and Stefan.
1995-10-01 20:51:34 +00:00
db0107b895
Specify SCSI_DATA_OUT in sddump() (from John Kohl; PR#1482).
1995-09-30 22:57:19 +00:00
b93138b93d
Add another broken NEC CD-ROM drive to The List. Fixes PR #1451 .
1995-09-26 23:37:50 +00:00
a47ab73248
memcmp -> bcmp. Fixes PR #1518 .
1995-09-26 22:56:54 +00:00
601a054fb3
Remove a sun3-ism.
1995-09-26 21:04:27 +00:00
26419c5a8b
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:31:15 +00:00
249cddaaa7
Don't declare Debugger(). It's handled in <sys/systm.h>.
...
#include <sys/systm.h> where necessary, as suggested by Jonathan Stone.
Fixes PR #1511 .
1995-09-26 19:26:48 +00:00
dd2f3dddef
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:24:26 +00:00
ddbb956f35
fixes a typo, the case where iomem is specified, but iosize is not, and
...
moves a couple of ee16 specific calls into a 'if ee16' protected block.
From Andrew Gillham <gillham@Digitron.COM>
1995-09-26 13:24:48 +00:00
a8e925d362
rcons (Raster CONSole) brought over here from the sparc area.
...
sparc device dependencies have been removed, as well as all references
to `struct fbdevice's. Clients need to #include <dev/rcons/rcons.h>.
1995-09-17 19:56:30 +00:00
0fbf2ca04a
Make *print() a message if no scsibus was attached. Also, return something
...
valid.
1995-09-14 20:43:09 +00:00
abe82a6680
Etherexpress-16 driver collision by Andrew Gillham <gillham@Digitron.COM>.
1995-09-14 12:41:32 +00:00
d7b9b56e07
Rename the old pmax SCSI driver's "struct scsi_device" to
...
"struct pmax_scsi_device", to avoid name conflicts with the sys/dev/scsi
SCSI driver.
1995-09-13 19:35:53 +00:00
dec12b783d
Initialization and keymapping code for DEC LK-201 and successor keyboards,
...
abstrated out of the pmax scc and dc7085 drivers.
1995-09-11 21:23:07 +00:00
23366c17ff
Rename the old 4.4bsd/pmax old-style config "struct device" to
...
"struct pmax_device" to avoid conflict with <sys/device.h>.
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
1995-09-11 08:29:11 +00:00
7e85a5a412
Fix misplaced #ifdef.
1995-09-06 04:15:59 +00:00
589d83d6a8
Patches from Jason Thorpe to deal with 4/110 scsi (PR#1422).
...
Also repairs a problem noted by David Jones: detect scsi phase correctly.
1995-09-03 22:26:02 +00:00
0696b30519
Wrap dk stats stuff in `#ifdef WORKING_DISK_STATISTICS'. Takes care
...
of PR #1388 until such time as dk stats works on all ports. XXX !!
1995-08-29 23:13:44 +00:00
d6160bdc1b
Fix typo in comment, from Chris P. Ross.
1995-08-23 01:08:10 +00:00
97cf65df4a
Change pmax ASC driver to use dynamically-allocated softc structures.
...
Concomitant changes to code that prints driver/unit name: use dv_xname
and dv_unit, instead of doing pointer arithmetic on elements of the static
softc array.
Remove support for old config. The old-config "driver" structure
is still present, because the pmax non-MI SCSI driver needs it.
Merge some off Per Fogelstrom's changes for the Pica driver,
which uses the machine-independent SCSI code. This is #ifdef'ed
out until the DMA is fixed to work on Decstations, too.
1995-08-21 21:22:43 +00:00
a2db2c1899
Fix typo, pointed out by cross@va.pubnix.com (Chris P. Ross).
1995-08-21 18:25:52 +00:00
d9e37f2bc7
Set the scsi link before calling config_attach(), so target/lun info is
...
available to, say, dk_establish().
1995-08-21 09:30:09 +00:00
b7680d7c14
Select the right register structure for the Atari. Although it's big-endian,
...
it uses the odd bytes. Also make the registers volatile.
1995-08-20 13:24:05 +00:00
4fec83b441
Fix oversights in previous change.
...
Remove ugly casts and correct spelling.
1995-08-19 04:58:44 +00:00
b0dc5d3d7f
local adaptations, and fix a could of compilation errors
1995-08-19 04:35:18 +00:00
1c8b202de7
use I/O ports on the i386
1995-08-19 04:27:31 +00:00
01597582c1
fix botch in one of my previous imports
1995-08-19 04:15:29 +00:00
9980150670
Generic FDDI support by Matt Thomas. Support for DEC "PDQ" FDDI chipset
...
and for the PCI attachment of said chipset ("if_fpa"), also from Matt Thomas.
Arguably, pdq* doesn't belong in sys/dev/ic, but it's going to be shared by
various bus attachment devices at some point in the future, and there's no
other place that seems to fit as well.
1995-08-19 00:59:47 +00:00
8b417fd28b
add 'fpa' for Matt Thomas's driver for DEC PCI FDDI boards. alphabetize.
1995-08-19 00:44:48 +00:00
c9dbf2d1d2
clean up 7/26 de snapshot import
1995-08-17 18:04:55 +00:00
77d85de272
New version of ccd. Allows dynamic run-time configuration and
...
unconfiguration and supports disklabels.
1995-08-17 16:31:30 +00:00
a2e0a97608
check for null subclass pointer. From Todd Mummert
1995-08-16 04:54:50 +00:00
3560df43af
CHINON CDS-535 version Q117 also needs NOLUNS. Assume all 535s do.
1995-08-14 13:01:42 +00:00
19f3c3099f
Another SDEV_NOLUNS device from paul@pgoyette.bdt.com (Paul Goyette).
1995-08-13 17:48:57 +00:00
8887de9230
opri --> s
1995-08-12 22:58:01 +00:00
240560e9fd
ia_irq has not been a power of 2 for a long time...
1995-08-12 22:37:58 +00:00
8a9880e714
Fix oversight in previous.
1995-08-12 21:36:46 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
88b9b7eb4a
Update DECstation drivers to use new-style config, removing
...
old-style config support, except for SCSI disks and tapes.
1995-08-10 04:21:35 +00:00
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
f657f5bf3e
Make this interface simplex. It's more efficient, and sidesteps the
...
problem of receiving our own multicasts in promiscuous mode. Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
92637a6d42
Add another Seagate disk to the list, and make all the disks match any
...
firmware revision.
1995-08-06 00:04:00 +00:00
6567855472
Count collisions and errors better.
1995-08-05 23:53:18 +00:00
82b6eec41c
Use an intermediate variable to shorten label initialization code.
...
Make wddump() work on more machines.
1995-08-05 23:50:23 +00:00
24a5e56396
Use an intermediate variable to shorten label initialization code.
1995-08-05 23:47:52 +00:00
1bacfdc2dd
Add preliminary support for new-style configuration: struct cfdriver,
...
and match and attach code. Still use the static softc so that drivers
work with kernels configured with either new or old config.
1995-08-04 00:26:35 +00:00
60d2d483ca
Turn off the mbi diagnostics completely.
1995-07-29 23:04:54 +00:00
a4fcbe857d
Don't loop if we're out of CCBs/SCBs/MSCPs.
1995-07-28 22:49:56 +00:00
38036ed16e
Fix an oversight in the previous.
1995-07-27 05:01:08 +00:00
e04a2a7a7f
Add needs-flags for pci_subr.c.
1995-07-27 04:43:19 +00:00
c9f7b2a185
Add PCI-specific configuration for PCnet-PCI.
1995-07-27 04:39:05 +00:00
7ba8b413d9
Disable diagnostics related to expected mbi race condition.
1995-07-27 01:00:11 +00:00
fc427776a7
Add stuff for I/O mapping.
1995-07-27 00:29:02 +00:00
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
d8e7ea659c
restore a deleted semicolon
1995-07-24 09:03:00 +00:00
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
4d0bd10d53
kill structure offest comments in non-fixed-size structures.
...
In some of our worlds, pointers just Aren't 4 bytes.
1995-07-24 07:08:14 +00:00
3301cf82fd
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 06:55:37 +00:00
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
979cf41d87
merge changes from update
1995-07-24 05:26:53 +00:00
607e071f1b
Fix pasto.
1995-07-24 04:34:51 +00:00
8170afdb2d
Copy changes from ISA version.
1995-07-24 04:15:35 +00:00
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
267dd7012f
merge updated version from Matt Thomas, which includes dc21041 support.
...
There are a couple of questionable changes in here, that i'm going to
hammer out of him in the next week or so...
1995-07-24 03:54:14 +00:00
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
f8b400c446
Change DEBUG-->AUDIO_DEBUG. PR# port-sparc/1241
1995-07-19 19:50:16 +00:00
0b469d4a12
add/change a few quirks:
...
(1) all Chinon CDS-431 CD-ROMs (regardless of revision)
are forced to only having LUN 0, at the suggestion
of Michael Hitch.
(2) _force_ searching of extra LUNs for the Emulex MD21/S2
ESDI bridge. It's pre-SCSI 1, but knows about LUNs.
"amazing." From Jason Thorpe.
(3) recognize an Emulex tape adapter in front of a QIC-36
tape, and have it forced to only LUN 0. This is
an odd one; vendor, name, and rev strings are all
spaces. Anything that mathes this is very likely
broken, anyway, so might as well give it a shot.
Again from Jason Thorpe.
1995-07-12 09:56:09 +00:00
d8fe81c04c
implement SDEV_FORCELUNS flag, as suggested by Jason Thorpe.
1995-07-12 09:43:29 +00:00
f60db5f02a
add a SDEV_FORCELUNS flag, as suggested by Jason Thorpe, to force
...
the SCSI code to look for LUNs on prehistoric (pre-SCSI 1) drives &
controllers, where normally it would not.
1995-07-12 09:42:00 +00:00
880567e771
fix from Onno van der Linden for large-file read timeouts on double-speed
...
drives. A different read command must be used on double-speed drives.
It boggles my mind that people could design hardware this stupid.
1995-07-10 01:27:24 +00:00
5b671ea6a8
Morningstar SnapLink -> SDEV_NOLUNS, per Peter Galbavy in pr 1192.
1995-07-09 09:44:57 +00:00
21b6db23b7
play the alphabetization game
1995-07-09 09:43:07 +00:00
5a5eb678c9
QUANTUM P105S 910-10-94x A.3 -> SDEV_NOLUNS
1995-07-09 09:30:42 +00:00
c5ad4c85f0
ncr5380 chip definitions and MI part of driver.
1995-07-08 21:30:41 +00:00
e574814605
insert missing call to splx() when {aha,bt}_send_mbo() returns null.
...
from enami@sys.ptg.sony.co.jp .
1995-07-08 00:34:16 +00:00
4b4b3ee81a
Cleanup
1995-07-07 02:19:48 +00:00
dd3d2e28ed
Setup irq correctly (PR#1179)
1995-07-07 02:15:12 +00:00
0bdd4aa7c2
add support for cs4231
1995-07-07 02:11:45 +00:00
106dafc42e
Common splaudio and ISA_IPL_AUDIO
1995-07-07 01:58:04 +00:00
0589b5a222
Make mode a flag set. Full-dpulex fixes from John Kohl.
1995-07-07 01:52:30 +00:00
9624704e02
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-05 02:32:53 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
eb99dcc09a
Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit
...
the case of no pending input in compoll().
1995-07-04 06:47:18 +00:00
f4b5f723e0
Remove references to if_addrlist.
1995-07-02 00:16:00 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
28cbee6941
move to more appropriate (...reg.h) names.
1995-06-28 04:02:13 +00:00
bbe407930b
header file got renamed
1995-06-28 03:26:36 +00:00
40e29d5890
sync with my current Alpha sources
1995-06-28 02:44:51 +00:00
50937bb63a
add charles's mostly-machine-independent lance driver, which is used
...
by the Alpha port.
1995-06-28 02:24:50 +00:00
c319ff6546
these have moved to more appropriate names
1995-06-28 02:23:27 +00:00
1c5d265cad
another CD-ROM quirk, a la PR 1166
1995-06-27 20:42:45 +00:00
5ad7f31079
udpate to match ifnets new use of sys/queue.h
1995-06-27 13:13:32 +00:00
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
d093e5d8b8
make dump stubs consistent
1995-06-26 05:15:33 +00:00
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
d8264613c8
add entry for another tweaked Texel CD-ROM. from pr 1151
1995-06-24 01:22:30 +00:00
6907f7f64d
fix reference to incorrect struct (paste-o)
1995-06-21 03:56:09 +00:00
9526317aa1
vendor IDs for Acer and SIS
1995-06-20 04:50:43 +00:00
a68aae96fc
David Leonard (leonard@dstc.edu.au) noticed an embedded comment
...
delimiter in a comment within a #define (ZSWR14_DTR_REQ). Inserted
spaces in case someone wants to use this define at some point.
1995-06-19 13:15:08 +00:00
6664ae1ddd
Add another CD-ROM drive to The List.
1995-06-18 05:13:09 +00:00
4f7335a75a
macros to split out various parts of PCI registers, adjust constants
...
to match. (now, comparisons are comparisons, code doing them doesn't
have to mask.) define types for the various parts of the registers'
contents, where practical.
1995-06-18 01:34:01 +00:00
c4640b104d
define and call "pci_devinfo()", which creates a string from the
...
vendor & product IDs and class information, which is printed if device
isn't found. Optionally (via "PCIVERBOSE" option) does table lookup
to try to see if it knows what the device really is (informational only...).
1995-06-18 01:28:23 +00:00
e86a68a339
prototype for pci_devinfo function
1995-06-18 01:26:50 +00:00
c644446a99
add include for the alpha, alphabetize
1995-06-18 01:24:40 +00:00
8ced60f181
make a comment reflect the way things should be done
1995-06-18 01:23:11 +00:00
2cfceff6b5
built from pcidevs list
1995-06-18 01:09:14 +00:00
27adbb1130
learn about some PCI vendor and product numbers. not yet used
1995-06-18 01:07:04 +00:00
ae76c070ec
oops; forgot this in last commit
1995-06-17 23:06:44 +00:00
6f13f2448a
more appropriate name, as this only has PCI support subroutines.
1995-06-17 22:40:26 +00:00
7aaf918c75
d_reset reference removed. Calling of ubareset must be solved.
1995-06-16 15:26:11 +00:00
d9fc8ef092
Remove check for if_addrlist == 0; if_attach() always puts one address on
...
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
e6c81430d2
Add missing `break;'s.
1995-06-09 18:09:27 +00:00
da5b5dfa63
make match/attach routines and cfdriver struct mi
1995-06-07 06:46:04 +00:00
5a29222f9c
prototype isascan, spacing
1995-06-07 06:45:44 +00:00
d4f62dcb69
update from Ignatios Souvatzis
1995-06-07 00:13:52 +00:00
3349ad1b56
update from matt thomas
1995-06-06 23:31:24 +00:00
4bfd7749ad
Various:
...
* Check for CTS in the correct register.
* Only do a selwakeup() if we output something.
* Don't make assumptions about what TTYDISC does.
1995-06-05 19:08:09 +00:00
dede989b85
enable the de driver
1995-06-05 01:03:45 +00:00
d0d9fe6333
set a shutdown hook
1995-06-05 01:03:30 +00:00
89c30bb2e3
do the right thing with fixed-size types.
1995-06-05 00:49:45 +00:00
96caf354eb
kill old Id, add NetBSD Id
1995-06-05 00:47:42 +00:00
c71cccacde
kill old Id and Log. add NetBSD Id
1995-06-05 00:46:30 +00:00
551bcffab9
dc21040 driver, from Matt Thomas
1995-06-05 00:38:18 +00:00
5b37a8fded
Handle BREAK correctly when not entering DDB.
1995-06-04 20:50:14 +00:00
38847d04c0
Add an input FIFO, and fix several flow control problems. Based on code from
...
Felix A. Croes.
1995-06-04 20:39:22 +00:00
cea924779e
call hw->setfd with param not ptr to it
1995-06-04 15:33:50 +00:00
7d18c2534d
Add `Maxtor LXT-213S', this time without a Sun OEM addition.
1995-06-02 21:44:11 +00:00
d045544ebd
Changed ns82450 to ns8250 and dropped ns82550 from probe console messages.
1995-06-01 21:26:51 +00:00
488bc82ac3
Fix multicast filter calculation.
1995-05-28 11:29:46 +00:00
addaff473b
Only use the `no pending interrupt' bit in the IIR; the other bits
...
are too unreliable on clone chips.
1995-05-28 03:26:37 +00:00
bad826164e
split single-subdevice lookup & attachment into a subroutine
...
(pci_attach_subdev()). remove pciattach() function and the pcicd cfdriver
struct, the former because thre are a lot of attachment actions which really
are machine-dependent (perhaps even "most"), and the latter because now that
both pcimatch() and pciattach() are machine-dependent it's bad style to
declare them here and it gains nothing.
1995-05-23 03:43:06 +00:00
3ebc44f6e1
isa softc structs are larger than 'struct device'
1995-05-17 02:07:03 +00:00
c821cb684a
(1) conditionalize debugger usage in comeint with DDB, not COMCONSOLE;
...
latter would lead to undefined symbols if DDB not defined.
(2) check for break on console, and therefore debugger entry (if ddb
in kernel) earlier, so that the device doesn't need to be open.
(3) return immediately after breaking into the debugger in comeint().
(4) only do the normal character input routine in comintr if receive
mask yeilds _EXACLTY_ LSR_RXRDY. if there's only a receive
error, or there's a receive error _and_ a received character,
do comeint().
(former two by me. latter two from Bob Baron <rvb@cs.cmu.edu>.)
1995-05-12 17:54:41 +00:00
8aa6c376b6
KERNEL -> _KERNEL
1995-05-11 16:52:54 +00:00
8742c18c06
Update for slightly modified ARP handling.
1995-05-10 14:04:14 +00:00
c68110e043
Remove strings
1995-05-08 22:01:34 +00:00
2d93a58abd
Don't call hardware close in mixer_close(). From Rolf Grossmann <grossman@informatik.tu-muenchen.de>
1995-05-08 17:42:07 +00:00
05f27a97ce
Fix holes in device index space. PR#1028
1995-05-08 17:28:51 +00:00
f5675abf16
Set mixer type for rec and play level set. PR#1027
1995-05-08 16:06:38 +00:00
8951a20fe2
Auto-select open mode when opened half-duplex. From John Kohl. PR#1006
1995-05-05 22:36:14 +00:00
7d244351cf
Add `evcnt' field.
1995-05-04 19:43:27 +00:00
5d25b2c50e
machine-independent definitions for the Motorola MC146818A Real Time Clock
...
and compatible chips, including the Dallas Semicontuctor DS1287A.
This chip is used in PC's, DECstations, and Alphas, at least...
1995-05-04 19:31:18 +00:00
011aa68805
looks like some extra ')'s were left in here.
1995-05-03 21:38:57 +00:00
1d2f0bce2a
Make the byte-shifting code consistent.
1995-05-03 19:38:45 +00:00
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
8d90aefeb0
New audio driver from Rolf Grossmann.
1995-04-25 20:05:32 +00:00
e49b0de53f
short -> int (alignment)
1995-04-24 21:34:04 +00:00
6404739df8
AMD9730 telephony chip (used to be sparc/dev/bsd_audioreg.h).
1995-04-24 19:17:17 +00:00
30f71c550f
A couple of fixes frm Rolf Grossmann.
1995-04-24 19:13:52 +00:00
bfab570cda
Add constants for some keyboard controller commands.
1995-04-21 09:16:16 +00:00
cb856a9a4d
Watchdog now takes an int, not a short.
1995-04-19 22:42:51 +00:00
9e28a35469
Fix thinko in previous change.
1995-04-19 22:04:33 +00:00
53d73c77a5
Garbage collect #includes.
1995-04-19 19:10:35 +00:00
4c28b7cb87
Change `needs-count' to `needs-flag'.
1995-04-19 19:02:54 +00:00
e1315808a7
Implement comtty().
1995-04-19 18:59:27 +00:00
496acd4619
Correct a couple of things, and add a `fe' device.
1995-04-19 02:11:10 +00:00
800b1f371a
Fix obvious bug in reading from SB_MIC_PORT.
1995-04-17 23:48:06 +00:00
fa37f29dc8
Make some functions non-static.
1995-04-17 23:04:31 +00:00
15552a0e17
if_le conflicts with the Alpha; move description back to i386
1995-04-17 20:23:32 +00:00
af67271a66
try to actually (gasp!) describe the drivers.
1995-04-17 17:54:15 +00:00
d61eaf6f6d
ISA config.new files description.
1995-04-17 16:58:30 +00:00
fac8a6879e
MI EISA config.new file lists
1995-04-17 16:15:48 +00:00
982230db44
update for new locations
1995-04-17 15:48:20 +00:00
8a640328ed
clean up several ISA device interfaces: autoconfiguration, header
...
inclusion, and interrupt configuration. more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
5f252bb8ea
config.new files description for PCI mi files.
1995-04-17 07:46:10 +00:00
224a7f4533
config.new description of SCSI mi files.
1995-04-17 07:15:40 +00:00
edc749be89
cleanup; mostly KNF.
1995-04-15 10:35:24 +00:00
04e937dcbd
Don't boundary check I/O to the `raw' partition.
1995-04-15 05:01:26 +00:00
ed0da4a701
couple small changes plus a new watchdog timer from Ignatios Souvatzis <is@beverly.rhein.de>
1995-04-14 16:57:19 +00:00
d8b4389dc3
cast pointer to long when converting to integer type
1995-04-13 04:16:16 +00:00
d57b9b75ba
Take endianness into account in ed_ring.
1995-04-12 16:12:42 +00:00
333a55a4ce
Remove duplicate definition of `constty'.
1995-04-11 22:08:06 +00:00
a04aa1397a
fix up some changes
1995-04-11 18:51:55 +00:00
57289e2cf2
Split cninit from cons so ports that can't use it don't have to include it.
1995-04-11 10:06:38 +00:00
893d53414a
Sync with the rest of the world. Various additional cleanup.
1995-04-11 05:46:53 +00:00
c7a7d5c262
Sync with the rest of the world.
1995-04-11 05:10:20 +00:00
8d8af964a7
Move NIC register definitions to a global location.
1995-04-11 04:45:26 +00:00
6e9015b37a
This is deprecated.
1995-04-11 04:44:44 +00:00
b703c76655
Update for if.h. Define helper macros for accessing NIC registers. Optimize
...
edrint() a little more.
1995-04-11 04:38:42 +00:00
d4b1924adb
LANCE register definitions, plus some utility macros for the machine-
...
independent driver.
1995-04-11 04:17:50 +00:00
24a8feea65
Adjust for endianness, and move CHAN_[AB] out of here.
1995-04-11 02:35:18 +00:00
9b0d3f54e8
Move this into a generic location.
1995-04-11 02:29:25 +00:00
70839d3b04
Change start and watchdog return values to void.
1995-04-10 18:21:42 +00:00
68c8c80929
kernel_pmap --> pmap_kernel()
1995-04-10 16:48:27 +00:00
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
6e992fcd83
Add a dummy cnstop().
1995-04-10 06:30:52 +00:00
95c5c4f79f
Most of the console functions return void. Also change interrupt logic
...
slightly.
1995-04-10 01:05:55 +00:00
affcd0e2c8
Properly prototype the switch table functions. Add conf.h-like macros for
...
defining the switch tables.
1995-04-10 00:50:27 +00:00
87d43afd46
Clean up to match common code, and fix a typo.
1995-04-07 22:27:42 +00:00
3836533fc6
Add another broken CD-ROM drive to The List.
1995-04-04 05:44:32 +00:00
0e67f2a78e
Rename a few constants to match the chip documentation.
1995-04-04 01:59:28 +00:00
13ac06ec6a
More debugging printf()s, from Rafal Boni.
1995-04-04 01:44:23 +00:00
c04ae31e95
Prototype iexmit().
1995-04-03 21:22:37 +00:00
9085715229
Some pseudo-random cleanup, and try to start transmitting packets quicker.
1995-04-03 21:17:13 +00:00
7e2dabf972
Add a missing unlock.
1995-04-01 10:29:41 +00:00
508897dfcc
Insert a missing unlock.
1995-04-01 10:27:56 +00:00
03e3548ec7
Change the locking protocol to match other drivers.
1995-04-01 08:45:33 +00:00
5ef3b8b957
Always load the TOC. Turn off the TOC bit in the mode register so the busy
...
light goes off.
1995-04-01 08:40:11 +00:00
a95842832d
Bug fixes of interrupt handlers.
1995-03-30 20:55:23 +00:00
e17c63cee6
Revamp the locking mechanism slightly. Update some outdated comments, and add
...
a few new ones.
1995-03-29 23:36:27 +00:00
1d568eab9a
Revamp the locking mechanism slightly.
1995-03-29 23:04:39 +00:00
0884490297
KERNEL -> _KERNEL.
1995-03-29 21:56:46 +00:00
db0046c14d
KERNEL -> _KERNEL
1995-03-28 19:59:56 +00:00
71ab4ed9dc
KERNEL -> _KERNEL
1995-03-28 18:13:48 +00:00
aff93b44b4
Remove unused variable.
1995-03-27 21:44:11 +00:00
657ddd6fde
Remove a tiny bit of redundant code.
1995-03-27 18:08:34 +00:00
0a3d4f358a
It's not necessary to do a GETSTAT before each read.
1995-03-27 16:48:45 +00:00
c61cb27f9c
Small garbage collection, and turn off debugging info by default.
1995-03-27 16:04:07 +00:00
306af9bd89
Largely rewritten by me, with some input from Dave Burgess. Implement most of
...
the CDIOC* calls correctly, improve performance by 10x when interrupts work,
and implement the same generic disk framework as other drivers.
Needs some more work.
1995-03-27 15:45:20 +00:00
7c04233887
KERNEL -> _KERNEL
1995-03-26 20:23:52 +00:00
b51403f60d
Remove the write protect check altogether, and rely on the drive to do it.
1995-03-25 19:45:18 +00:00
12a1b9ad67
Add a rogue entry for the ANRITSU DMT780.
1995-03-25 18:41:42 +00:00
ff6c206c3f
Use void* rather than caddr_t in many places.
1995-03-25 00:00:53 +00:00
911fbf48fa
fix syntax error. Andreas Gustafsson <gson@clinet.fi>
1995-03-24 20:17:15 +00:00
cba4b405e4
don't let args default, return values, add protos
1995-03-24 15:29:46 +00:00
990077ba88
Don't bother with DIOCWLABEL.
1995-03-23 12:13:37 +00:00
06d0a67a07
Check for read-only media in open(), not write().
1995-03-23 12:11:07 +00:00
d21add8356
Revert cdsize() to do nothing.
1995-03-23 11:51:22 +00:00
4712cd33dc
Rearrange DIOCWDINFO a little; closer to wd.c.
1995-03-23 11:43:09 +00:00
562ca7760b
Fix typo.
1995-03-23 11:37:51 +00:00
02df08a47e
Allow DIOCWDINFO even if label is not `writable'.
1995-03-23 11:33:18 +00:00
331f0252c6
Fix probing of slave devices and remove unneeded ffs()'s
1995-03-21 14:05:28 +00:00
8193ffc379
Add support for PAS 16 basic
1995-03-15 18:45:58 +00:00
af46d07f24
fix compilation error. don't bother checking for IRQ2
1995-03-15 16:43:09 +00:00
36fa07bde5
Fixes defect port-i386/860 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. Kernel will not link with only ProAudio Spectrum driver
specified.
1995-03-14 18:43:19 +00:00
f3226ad49e
Fixes defect port-i386/864 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. pas.c doesn't recognize ProAudio Spectrum 16 Basic card.
1995-03-14 18:41:36 +00:00
37c67f3481
Turn off two diagnostic printfs by default.
1995-03-14 02:35:11 +00:00
7ce1465911
Fix SB8 playback. From David Gluss <david@pure.com>
1995-03-13 14:37:12 +00:00
1c9582b63e
Add IRQ 9 as a valid IRQ
1995-03-13 14:29:11 +00:00
f6589edbc7
spaces -> tab
1995-03-09 02:20:34 +00:00
83fffa3985
Cleanup for SB16 (From Jan Sparud)
1995-03-08 18:27:35 +00:00
e203e49ef5
Correct spelling of `fictitious'. Add patterns for optical memory devices.
...
From Alistair Crooks.
1995-03-07 21:46:06 +00:00
a55b765dd3
some cleanup..
1995-03-02 09:12:27 +00:00
a44a276543
from jason thorpe: add ccdclose(), make it work with the MI scsi code,
...
and add knowledge of i386 disk device names (XXX).
1995-03-02 06:40:38 +00:00
f694af6712
don't overload buffer structs; allocate and use a 'super-struct' instead.
1995-03-02 06:38:11 +00:00
e3c2563328
Fixup (c)'s and ids.
1995-03-01 11:34:02 +00:00
2ef7b2e7db
new arcnet (2060) device from is@Beverly.Rhein.DE (Ignatios Souvatzis)
1995-02-28 22:03:59 +00:00
63d3904bce
Use irq directly not as a mask
1995-02-28 21:47:42 +00:00
8f6f7fb7c9
use a buf-within-struct to avoid overloading b_pfcent.
1995-02-27 19:31:00 +00:00
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
389584724a
Support for uVAXII, new tmscp driver added.
1995-02-23 17:53:16 +00:00
2986fc2fd0
Be less picky about revision numbers for some broken devices.
1995-02-22 19:32:33 +00:00
559df5705c
PSS driver; needs testing with config.new
1995-02-21 04:15:03 +00:00
39b8de8e12
Driver for Windows sound system; not extensively tested
1995-02-21 02:28:42 +00:00
32eec53a2d
SoundBlaster driver for SB, SB16 and SBPRO
1995-02-21 02:28:06 +00:00
a70ae7273c
PAS driver; uses SB emulation for now
1995-02-21 02:27:18 +00:00
977594d1a9
Driver for ad1848 codec
1995-02-21 02:26:39 +00:00
1f5bdc75a9
New audio subsystem
1995-02-21 01:35:58 +00:00
8b834a58ca
Display more information when we get bogus data off the card.
1995-02-19 18:05:45 +00:00
0f894be19c
Rearrange epintr() to insure proper edge-trigger of the interrupt latch.
1995-02-19 06:13:53 +00:00
431121d46f
Fixes for new config.
1995-02-13 00:44:21 +00:00
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
e560d77223
Another Maxtor botch.
1995-02-09 10:23:14 +00:00
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
d8743f51a2
Add Exabyte 8200 to the list.
1995-02-01 09:37:54 +00:00
c937d3b9f2
Patch from Wolfgang to fix a missing spl.
1995-02-01 09:32:45 +00:00
52bacd79d6
Fix invocation of scsi_scsi_cmd(), per John Kohl.
1995-01-30 15:54:42 +00:00
1076165d07
All revisions of the TDC 3600 are rogues.
1995-01-30 15:39:33 +00:00
7639253b70
Finish last change.
1995-01-30 11:50:23 +00:00
321b00bd07
Some drives don't grok START with LoEj=1, either.
1995-01-30 11:47:56 +00:00
0ece1143f6
Set the LoadEject bit when issuing a START.
1995-01-30 11:37:17 +00:00
9085638020
Some devices really do require the START before the PREVENT. This makes no
...
sense.
1995-01-30 11:34:25 +00:00
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
87ed227cb4
include files from the correct places.
1995-01-27 05:44:29 +00:00
1611df6ae0
Update copyrights.
1995-01-26 12:05:49 +00:00
b76a328caa
Redo the `wait for spin up' code. The Mach 3 method clearly doesn't work.
...
Also, rearrange the first open sequences a bit; SDEV_OPEN is no longer magic.
1995-01-26 11:56:51 +00:00
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
95afef4f1d
kill _PATH_VNTAB; it's no longer used by anything.
1995-01-25 04:46:30 +00:00
66785ec427
Clean up deleted files.
1995-01-25 04:45:41 +00:00
d9f7c9f9be
vn -> vnd renaming, for consistency
1995-01-25 04:45:38 +00:00
726fa4e94f
Do the PREVENT before the START.
1995-01-23 18:17:22 +00:00
feb5b29596
Remove old, misleading comment.
1995-01-23 17:56:26 +00:00
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
3dddacd1ce
Rearrange tests so `offline' has higher priority than `out of paper'.
1995-01-22 00:12:39 +00:00
68c1a35cd9
Initialize host_stat and target_stat properly.
1995-01-18 04:20:16 +00:00
52f079131b
Incorporate recent changes from Wolfgang. Recognize the 815.
1995-01-16 21:48:35 +00:00
a6e7fe0d2a
If the disk reports a block size of 0, assume it really meant 512.
1995-01-16 21:40:17 +00:00
4a1e51751b
Trivial simplification.
1995-01-16 21:34:10 +00:00
e71e917e9d
Remove unused macros.
1995-01-16 21:31:34 +00:00
85532dd4ce
Don't clear the debug flags when copying the prototype scsi_link.
1995-01-16 21:13:40 +00:00
fcdbd2bd7b
Remove outdated comment.
1995-01-16 10:36:26 +00:00
87d587e640
Simplify some sanity checks.
1995-01-13 14:46:44 +00:00
28775a6a5d
Add a DIAGNOSTIC check.
1995-01-13 14:38:13 +00:00
1e5cd9212d
(Almost) allow sector sizes other than 512 bytes. Reduce some expensive operations.
1995-01-13 12:30:59 +00:00
7650bd97fc
Always boundary check I/O.
1995-01-13 10:46:32 +00:00
0033c975c6
Fix another bug in the DMA code.
1995-01-13 10:22:58 +00:00
4abdb375bc
Minor rearrangement.
1995-01-13 09:40:21 +00:00
c2bc310a37
Change the way sc_skip is used. Fix a bug in the (incomplete) DMA code. Add a
...
new sc_blkno (which will be useful later).
1995-01-13 08:58:16 +00:00
83a1c4799e
Add two more broken devices.
1995-01-12 10:25:44 +00:00
0a22930d97
Explicitly test the RXRDY status bit on incoming characters.
1995-01-11 09:56:40 +00:00
06b0414491
Actually, do the ID reset in elink_reset().
1995-01-07 21:37:54 +00:00
37e16c5747
Don't print line numbers in most of the diagnostics.
1995-01-07 06:49:35 +00:00
d4f91d51a9
Fix a race condition between normal I/O and wd_get_parms().
1995-01-07 03:07:22 +00:00
7f61bec5cd
Cosmetic changes, to look more like the new esp.c will.
1995-01-07 01:51:07 +00:00
ba288b4ae1
Do the reset in the individual drivers, not in elink_idseq().
1995-01-06 21:41:26 +00:00
290ed068ab
Remove many of the `static's, to facilitate debugging.
1995-01-04 09:02:32 +00:00
6125e1b551
Fix oversight in previous.
1995-01-04 00:47:53 +00:00
9e499d41b3
\
...
These files have been 99% rewritten from the original ast driver. Add an
appropriate copyright notice.
1995-01-03 22:38:54 +00:00
0349c5b9e0
Add a multiplexer for BOCA serial boards.
1995-01-03 22:26:36 +00:00
09834a5bd3
This is correct according to the docs on both cards.
...
Doesn't seem to make any difference to the known problems though.
1995-01-03 05:04:04 +00:00
b6c8a9a4e9
Update intr_establish() prototype.
1995-01-03 03:14:35 +00:00
93a0c4a258
Add interrupt sharing types.
1995-01-03 01:42:11 +00:00
b5cf1b5ddd
Add interrupt sharing types.
1995-01-03 01:30:14 +00:00
326830c1ba
Use direct config for subdevices.
1995-01-02 22:27:46 +00:00
e148dc7a64
Move setting of sc_maddr so soft config works.
1995-01-02 22:01:05 +00:00
a774fa6fe5
Use soft configuration when possible.
1995-01-02 21:57:04 +00:00
3a967fcbb6
More cleanup.
1995-01-02 21:27:27 +00:00
72dec3b548
Various cleanup.
1995-01-02 20:54:01 +00:00
3a74796b3e
Need isareg.h.
1995-01-02 20:39:35 +00:00
894bb9145f
Use soft configuration where possible.
1995-01-02 20:32:55 +00:00
2d5b04744a
Don't assume ia_maddr is in the hole.
1995-01-02 20:06:29 +00:00
dff292c275
Put Dan's broken tape drive in The List.
1995-01-01 11:37:03 +00:00
76b0b02cc3
Fix non-serious typo.
1994-12-31 05:34:00 +00:00
bfd9901daf
Fix some oversights in the debugging code.
1994-12-30 05:33:06 +00:00
d78ddddef6
Update the rogue entry for ancient drivers to match reality.
1994-12-30 05:23:49 +00:00
6e9d6a0d75
And a little better...
1994-12-30 05:20:22 +00:00
0a83cd8c57
Deal with short inquiry response a little better.
1994-12-30 05:14:52 +00:00
5d3bd57538
Fix a couple of things in the sense printing code.
1994-12-29 13:49:57 +00:00
f2909dc62b
Increase the st_space() timeout.
1994-12-28 19:55:50 +00:00
8fd135209c
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 19:42:47 +00:00
262b425866
temporary warning until I get new docs.
1994-12-28 16:47:50 +00:00
a596d50f29
various cleanups for -Wall, suggested by James Jegers.
1994-12-24 14:05:51 +00:00
ce06e718ad
Fix flags to isa_dmastart().
1994-12-17 18:45:11 +00:00
3e7afdbe8a
Remove DIOCSBAD handling. It's not actually handled, so why recognize it?
1994-12-16 04:38:30 +00:00
a395d884d5
Remove extra arg to d_open and vn_open().
1994-12-14 19:09:13 +00:00
ca65f2ce5d
Remove dkbad.h.
1994-12-14 15:17:22 +00:00
e694663b46
Make the diagnostics less cryptic.
1994-12-12 04:43:51 +00:00
3e4a358e28
Patch from Thomas Eberhardt to make PCnet-32 chips work.
1994-12-12 04:39:52 +00:00
303841c92e
3c509 fixes to avoid adapter getting stuck in high traffic conditions.
...
I don't particularly like the fixes, but at least now the 3c509 never
gets stuck. On the other hand, performance still sucks in some cases.
1994-12-10 14:52:02 +00:00
793e542f89
Fix format of attach message.
1994-12-10 05:55:26 +00:00
50c5dd6f0d
fix problem with disconnects (Ralph Campbell)
1994-12-05 19:11:12 +00:00
ba0ac0e803
added missing #ifdef DEBUG
1994-12-01 16:41:05 +00:00
1b372b7e96
Remove some redundant code.
1994-12-01 13:07:28 +00:00
0109779d43
Remove unneeded override of SCSI_NOSLEEP.
1994-12-01 12:45:25 +00:00
c1cbd9c635
Set UIO residual count.
1994-12-01 12:36:35 +00:00
71ab8bb627
Always set the device number correctly, even though we don't need it.
1994-12-01 12:26:37 +00:00
d18cbacd88
Redux.
1994-12-01 12:12:08 +00:00
1066219897
Uncomment call to scsi_user_done(), and remove a duplicate biodone() (and
...
another si_free()).
1994-12-01 12:04:43 +00:00
a10cbd7179
Remove the silly statically allocated array, and simply malloc the data
...
structures as needed. Also, put the buf in the malloc()ed area. Remove a
duplicate si_free() (though this was harmless before).
1994-12-01 11:53:56 +00:00
211b002017
Ignore ERR during diagnostics.
1994-12-01 10:45:26 +00:00
867ebf1d84
Clear the controller active flag after a timeout.
1994-11-30 02:32:03 +00:00
5584ff927f
Don't stall the queue on CHECK SENSE if we get a reselect while selecting.
1994-11-30 02:08:01 +00:00
639a64de08
Fix a null pointer reference.
1994-11-29 21:35:13 +00:00
51bed8d804
Add an assertion mechanism to check for more abnormal conditions.
1994-11-29 21:29:56 +00:00
58cb5339d6
For consistency...
1994-11-29 20:57:28 +00:00
41b26a6dfd
Handle BUS FREE phase a little differently, to get better error detection. Other
...
cleanup.
1994-11-29 20:08:27 +00:00
bb90feebac
Disable debugging breakpoints by default.
1994-11-29 17:56:49 +00:00
5ac2484d95
* Redo most of the message and phase state machines. Multiple pending
...
message outs should now work correctly (including retransmissions).
Multiple messages ins should be more efficient. Missing REQ after
reselection phase should now (correctly) cause a wait with ENREQINIT
set.
* Abstract out the reselection out sequence, and use it directly to
get sense info. (This is somewhat faster than the generic done/sched
sequence.)
* If there are no ACBs available, wait interruptibly for one.
* Leave the interrupt registers alone during message in/out; just
watch for phase change. Don't (incorrectly) reenable interrupts
during data in/out; defer that to aicintr().
* Handle command pointer per SCSI 2 spec.
* Other minor coding improvements.
1994-11-29 17:50:39 +00:00
fcf0991366
new asc.c from Ralph Campbell
1994-11-28 19:05:54 +00:00
6a2c060851
fix unary plus typo :-)
1994-11-25 23:19:03 +00:00
299c14af0c
New handling of pte:s for physio.
1994-11-25 19:09:31 +00:00
cba32aa25f
Minor update for new autoconfig.
1994-11-25 08:17:21 +00:00
0649f37219
Officially credit Onno.
1994-11-23 22:00:08 +00:00
2058abab15
Forgot to commit this as part of the LBA changes.
1994-11-23 07:56:52 +00:00
cc44b4600c
There's no point in bothering to unlock what we didn't lock.
1994-11-23 07:54:15 +00:00
6dda55519e
Fix an outdated comment.
1994-11-23 03:11:01 +00:00
a3fc466734
Use logical block addressing if available. Be a little more careful about
...
maintaining timeouts. Clean up wddump() a bit.
1994-11-23 01:35:43 +00:00
525fc36e19
Implement 32-bit reads and writes, but for now assume 16-bit mode.
1994-11-22 10:20:16 +00:00
3a99ddf172
Add a missing newline in some error messages.
1994-11-22 09:36:56 +00:00
db3bde9525
Implement EIDE multi-sector PIO and DMA modes, based on code from Onno van
...
der Linden. Also, various structural cleanup, and fix two bogons that crept
in, and remove all of the old clustering nonsense.
1994-11-22 09:33:59 +00:00
1e01855683
Minor fix to debugging code.
1994-11-22 05:50:48 +00:00
85826f0fbe
Fudge a couple more fields for ancient disks.
1994-11-22 05:39:16 +00:00
e1a7bac628
Change some constant names, etc., to better match the ATA spec.
1994-11-22 05:34:49 +00:00
95edd299b0
Add still more locking.
1994-11-22 03:23:49 +00:00
284d17e8f0
Complete last change.
1994-11-22 00:14:24 +00:00
0c36dd6762
C botch repair from bostic
1994-11-22 00:05:36 +00:00
c81c637ee3
Return EIO when the drive is empty.
1994-11-21 11:37:26 +00:00
7a1dcbfac6
Clean up open and close routines somewhat.
1994-11-21 11:28:47 +00:00
fd32202948
Replace dev_unit with device_softc in scsi_link. Change argument to foostart()
...
to void*.
1994-11-21 10:39:09 +00:00
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
9a3840f2f0
Stylistic changes.
1994-11-18 22:25:12 +00:00
61800cfa25
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 22:07:32 +00:00
35cdd801e6
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 21:57:40 +00:00
38483bbbf0
Enough Chinese torture already
1994-11-15 23:00:23 +00:00
393ee3693c
Surrounded call to debug routine with #ifdef DEBUG
1994-11-15 18:59:40 +00:00
a2727ec558
Check IRQ 9, not IRQ 2.
1994-11-15 00:00:24 +00:00
b341f7a8c0
Map IRQ 2 to IRQ 9.
1994-11-14 23:58:56 +00:00
c2c3dce760
added extra argument to vn_open
1994-11-14 06:00:10 +00:00
21e911d911
Update for new autoconfig.
1994-11-07 09:03:48 +00:00
2a9b6f7959
Fix stupid bug in last change.
1994-11-04 23:30:15 +00:00
4ec6774e12
Add a simplified version of wdcommand() that can be used in some cases.
...
Avoid needing a wd_softc inside wdprobe().
1994-11-04 23:18:06 +00:00
3df6bf0c0e
Trivial stylistic changes.
1994-11-04 21:32:23 +00:00
854d8d96dc
Rearrange slightly.
1994-11-04 19:25:34 +00:00
cfc4633919
Remove outdated comment.
1994-11-04 19:17:47 +00:00
b7acf321cd
No longer needs icu.h.
1994-11-04 18:59:34 +00:00
195574a7de
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:57:15 +00:00
29414c5a0a
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:34:50 +00:00
f8183b2d0e
Make a wrapper match function to check the bus and device numbers, rather
...
than insisting that every driver do it.
1994-11-04 09:42:18 +00:00
9af4fee97d
Use kvtop() rather than address arithmetic in a couple of places.
1994-11-04 08:55:53 +00:00
1948fcb3fa
Add a new function config_scan(), which just calls a particular function
...
with each plausibly cfdata, ignoring the priority mechanism completely.
1994-11-04 06:40:11 +00:00
2e8ae560f6
Commit incest with the config system for this one specific case.
1994-11-04 03:57:32 +00:00
fa769b0e97
Set ia_irq correctly.
1994-11-04 02:55:32 +00:00
7773b21b74
Correct an oversight.
1994-11-04 00:53:06 +00:00
d4dd538296
Oops; forgot isacd.
1994-11-04 00:07:39 +00:00
3fca7e771a
New version using standard config_*() functions.
1994-11-03 23:53:19 +00:00
ebbdd6473b
Update to match autoconfig code.
1994-11-03 23:26:03 +00:00
19fc9d55c8
*intr() arg does not need to be void*.
1994-11-03 23:23:38 +00:00
d0163400d1
Update to match autoconfig code.
1994-11-03 23:21:24 +00:00
54cc63645d
Update to match autoconfig code.
1994-11-03 23:08:27 +00:00
d23d1e83dc
Use indirect config for subdevices, and add dkdrivers where missing.
1994-11-03 22:55:58 +00:00
94cde915db
Rename pciprobe() to pcimatch(), and move it to pci_machdep.c.
1994-11-03 22:27:16 +00:00
e06bd72a85
Always use direct configuration.
1994-11-03 22:15:19 +00:00
d8561ad477
Oops; update scsibusmatch() arg list.
1994-11-03 22:09:00 +00:00
ef0c18e1cf
Always use direct configuration for SCSI devices.
1994-11-03 22:05:08 +00:00
54608f7ea0
Remove a couple of i386-specific hacks, and make a couple of others #ifdef
...
CONFIG_INDIRECT instead.
1994-11-03 20:24:21 +00:00
283745574f
Commit this, though it really does need work.
1994-11-03 16:55:57 +00:00
1c76bf7aa1
Add a nullcnpollc(), for people who don't want to deal.
1994-10-30 22:16:37 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
9769a6a6f7
Various:
...
* Forget all cached info when opening a new disc.
* If the disc is removed, flush the buffer queue rather than stalling it.
* Set the default label after getting the disc size, and fill in the info
for RAW_PART also.
* Change another use of the unit number to a softc pointer.
* Use a dkdevice to hold the label and open partition masks.
* Force the partition offset to 0 for RAW_PART, regardless of the label.
* Nuke MCDPHYS() and MCDREADRAW; they had a silly bug that caused the code
to not work, and they aren't useful anyway.
Some other minor cleanup.
1994-10-28 23:39:59 +00:00
022ee8f7fe
new RCS ID format.
1994-10-27 04:14:23 +00:00
5a13863a4b
Default to decent performance.
1994-10-27 02:04:18 +00:00
pk