0945bf58b0
Add examples for including the kernel crypto bits from either crypto-us
...
or crypto-intl, commented out, with instructions to use only one, and
adjust the prefix as necessary.
1999-07-09 18:55:33 +00:00
ecdad0ec33
clean up a bit after jason :)
...
- fix emitrules() like emitfiles() to deal with the prefix (otherwise it
would attempt to find the file in the normal base for the NORMAL_C rule).
- add emitincludes() which adds include directives for each prefix to the
$INCLUDES variable in the makefile.
- add %INCLUDES to each Makefile.arch to deal with the above.
this makes "prefix" actually work in a usable manner, and now i can move
on to fixing compiler warnings (errors) in the ESP code. :)
1999-07-09 09:52:55 +00:00
3ebbe095e0
Change the pmap_extract() interface to:
...
boolean_t pmap_extract(pmap_t, vaddr_t, paddr_t *);
This makes it possible for the pmap to map physical address 0.
1999-07-08 18:05:21 +00:00
c4d8d19db9
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 00:05:28 +00:00
80c284f9bb
-Wuninitialized is not used in the NetBSD tree, explicitly.
1999-07-02 20:55:19 +00:00
5effafcaa6
kernel configuration for IPv6/IPsec. should be in GENERIC in the future.
...
(source code will be committed soon)
1999-07-01 07:00:12 +00:00
aa5b341705
Kill duplicate RCS ID line at top of file.
1999-06-29 21:00:27 +00:00
29f88d843b
Since we know the start and end addresses of the symbol table, subtract
...
these and pass as the first parameter of ddb_init(). We used to pass
the contents of the start of the symbol table cast to an int, which for
an ELF kernel is "0x7f ELF" - not quite the symbol table size! How this
used to ever work I dunno...
1999-06-26 17:03:48 +00:00
118d1e7afa
Remove a few entries for nonexistant TC graphics boards.
1999-06-24 18:47:58 +00:00
7824f40e5f
Add a '#include <sys/resourcevar.h>' to each of these to allow them
...
to compile again.
1999-06-22 14:51:57 +00:00
7a71d12944
Clear out 'struct fbdevice' cruft; it represents bitrot on pmax. Add
...
#ifdef'ed out definition for 'struct fbsoftc', the way forward until
[nisimura-pmax-wscons] is merged.
1999-06-21 19:21:10 +00:00
5756acc071
Cleanup.
1999-06-21 19:07:16 +00:00
ebd6cdffde
px.c requires that qvss_compat.c be compiled in.
1999-06-21 19:05:10 +00:00
9e9f068f43
Add the guts of mlockall(MCL_FUTURE). This requires that a process's
...
"memlock" resource limit to uvm_mmap(). Update all calls accordingly.
1999-06-18 05:13:45 +00:00
9a3291290d
- Correct errorneous comments for kn*_wbflush() routines.
1999-06-10 01:37:10 +00:00
0ebace83f4
- Remove local declaration of 'dev_name2blk[]'.
...
- Minor formatting correction and removal of defunct debug lines.
1999-06-10 01:06:40 +00:00
981a3b4cb2
- Nuke declarations for now obsolete implementations of spl()s.
1999-06-09 07:33:29 +00:00
6a949cddfb
Include <pmax/pmax/machdep.h> instead of declaring our own prom_*()
...
prototypes.
1999-06-08 23:42:36 +00:00
b7a2ec3f01
+ Call prom_scsiid() to found out what the host SCSI ID should
...
be instead of hardcoding values.
+ Print the host SCSI ID in siiattach().
XXX - probably should do the same to the ASC driver?? The manuals for
the 5000 series machines don't mention the scsiidN env variable, but it
is present on all the models I've looked at...
1999-06-08 23:41:59 +00:00
7eb995464d
+ Add prototypes from the prom_*() callback routines.
...
+ Remove leading "extern" from function declarations.
+ CG unused latched_cycle_cnt.
1999-06-08 23:40:42 +00:00
661c94c72c
+ Add prom_getenv(), and use it instead off calling callv->_getenv.
...
+ Add prom_scsiid() to read and decode the prom scsiidN environment
variable that says what the host SCSI id should be.
+ Include <pmax/pmax/machdep.h> instead of declaring our own
prom_*() prototypes.
1999-06-08 23:40:19 +00:00
2c35c7bd03
Only declare block major numbers for devices which can be the root device.
1999-06-07 20:31:27 +00:00
d76e7b8c6d
Don't pass a nam2blk around at all; just have setroot() and friends reference
...
dev_name2blk[] directly. Addresses PR #7622 (ITOH Yasufumi), although
in a different way.
1999-06-07 20:16:08 +00:00
8286166c86
- Call _splnone() explicitely after auto config. was well done to make
...
sure SOFT_INTs cleared before interrupt processing is started.
1999-05-31 07:42:56 +00:00
fcd9e7edb9
- Correct uninitialized pointer issue I made.
...
- Put a comment why the original prodtype detection logic made no trouble.
1999-05-29 09:31:02 +00:00
59dfa57be9
Move initialisation of ioasic_base to dec_3maxplus_init() - it is used
...
in this function before dec_3maxplus_os_init() gets called.
1999-05-29 07:10:36 +00:00
f62bb2b791
Add CD9660 filesystem - useful for installing from CD-ROMs :-)
1999-05-28 08:07:12 +00:00
9b5cf7b4de
- Save MIPS1 only configuration for 3min, pointed by Erik Bertelsen
...
<erik@mediator.uni-c.dk>
1999-05-27 06:43:50 +00:00
2580d306ab
Change the vm_map's "entries_pageable" member to a r/o flags member, which
...
has PAGEABLE and INTRSAFE flags. PAGEABLE now really means "pageable",
not "allocate vm_map_entry's from non-static pool", so update all map
creations to reflect that. INTRSAFE maps are maps that are used in
interrupt context (e.g. kmem_map, mb_map), and thus use the static
map entry pool (XXX as does kernel_map, for now). This will eventually
change now these maps are locked, as well.
1999-05-26 19:16:28 +00:00
1922144399
- Remove now obsolete function declaration.
1999-05-26 04:27:27 +00:00
d7a56fd7fa
- Continue on branch merge, incrementally.
...
- Catch up filename changes escaped to be fixed.
1999-05-26 04:23:58 +00:00
5832084eaf
bus_dmamem_map() maps DMA safe memory, which is usually one or more
...
managed pages, into KVA space. Since the pages are managed, we should
use pmap_enter(), not pmap_kenter_pa().
Also, when entering the mappings, enter with an access_type of
VM_PROT_READ | VM_PROT_WRITE. We do this for a couple of reasons:
(1) On systems that have H/W mod/ref attributes, the hardware
may not be able to track mod/ref done by a bus master.
(2) On systems that have to do mod/ref emulation, this prevents
a mod/ref page fault from potentially happening while in an
interrupt context, which can be problematic.
This latter change is fairly important if we ever want to be able to
transfer DMA-safe memory pages to anonymous memory objects; we will need
to know that the pages are modified, or else data could be lost!
Note that while the pages are unowned (i.e. "just DMA-safe memory pages"),
they won't consume any swap resources, as the mappings are wired, and
the pages aren't on the active or inactive queues.
1999-05-25 23:14:03 +00:00
fec53c08d6
- Use dev_name2blk[] array prepared by config(8) instead of handcrafting
...
local data.
1999-05-25 09:32:27 +00:00
058f5a1517
- Continue to import a development branch.
...
- Minor formatting fix.
1999-05-25 07:37:08 +00:00
014ba724c0
- Rework spl(9) implementation. Use _spl*() processor mask manipulating
...
routines now reside in locore.S. No functional difference is expected.
- Replace abused splx() abuse with _splset() to change MIPS processor
interrupt mask bit. 'mips/trap.c' side will be fixed soon.
1999-05-25 04:17:57 +00:00
080560c8c6
- Setting initial position of cursor is up to caller.
...
- Set cursor position properly for SPARC. From Juergen Hannken-Illjes.
1999-05-23 17:59:39 +00:00
9cfc8d7736
- Track filename changes.
1999-05-21 01:10:49 +00:00
04aeaae250
- Rename file names;
...
dec_3max_subr.c -> memc_3max.c, dec_kn02_subr.c -> memc_3min.c
1999-05-21 01:09:48 +00:00
c0c79283f3
Moved from dec_kn02_subr.c
1999-05-20 14:15:57 +00:00
a5b668be64
Moved from dec_3max_subr.c
1999-05-20 14:14:39 +00:00
e4a87aa1a9
* convert to using MI allocsys(). most ports were using an MD allocsys(),
...
although a couple still used the old pre-4.4-lite (?) mechanism.
* use format_bytes() to format the various printf()s that print out memory sizes
1999-05-20 08:21:42 +00:00
02bc362e3e
Add arg to rcons_init() that when set causes screen to be cleared.
1999-05-19 20:34:19 +00:00
39db587e6f
Cleanup.
1999-05-19 20:14:46 +00:00
bb3a510fa2
Assign ownership & copyright to TNF. There is probably a procedure for this
...
that I am unaware of. Also some KNF.
1999-05-18 21:51:57 +00:00
c99765853f
- Move MachSetPID(1) call to pmap_bootstrap() adajacent to kernel pmap
...
initialization code.
- Abandon mips_init_proc0() and do the 4 lines straightly in MD mach_init().
- Restore a block of code accidentally lost in prevous commit.
- Change the term 'tlbpid' to a MIPS3 nomenclature 'asid'.
- Hide PTE size exposures by symbolic names in locore.S
1999-05-18 01:36:51 +00:00
3b602e5afa
Panic if rasops_init() fails us (should never be the case).
1999-05-15 13:04:03 +00:00
e37110cfef
Add some instructions.
1999-05-13 08:40:08 +00:00
bb592db897
Standalone program that contains a compressed kernel image suitable for
...
netbooting on machines that can't netboot a fullsize kernel.
This is only a stop-gap solution until the pmax gets a working two stage
netboot, and is not enabled by default.
1999-05-13 08:38:05 +00:00
a10adaf5aa
- Utilities of DECstation PROM call were moved to 'promcall.c' and
...
take a bit care about findcons.c console support kitchen sink.
1999-05-11 05:15:54 +00:00
d85f3411a7
- Have 'promcall.c' for various utilities by PROM calls.
...
- Adjust files.pmax.
1999-05-11 05:06:35 +00:00
d5ce574eee
Fix tyop in comment, and keep comment lines to less that 80 chars.
1999-05-10 12:36:16 +00:00
2105341c9f
Back out part of previous commit - we really only support one px at
...
the moment. From Andy Doran.
1999-05-10 12:18:57 +00:00
4cd55c6082
Change {cfb,mfb,sfb,px}0 to {cfb,mfb,sfb,px}*.
1999-05-10 04:52:34 +00:00
a70ad445f3
The comment says we support up to 3 framebuffers, make it so...
1999-05-10 04:49:24 +00:00
c7ad933ffa
Add a second memory free list, which holds the first 8M of RAM. This is
...
so that devices which must allocate DMA memory in this range (e.g.
PixelStamp graphics boards) have a better chance of doing so, without
an awful hack.
1999-05-07 18:04:36 +00:00
4ce0e8e16f
- Nuke '_splset' alternative entry point mistakenly added.
1999-05-07 06:18:56 +00:00
1f4085fb66
Fix spruious false matches in px_match().
1999-05-06 01:50:56 +00:00
3801a05ffb
Add cookie for wsfont to px_info. Don't try to get/lock a font if we
...
are not the console.
1999-04-29 02:50:25 +00:00
49a60fee19
Add loadfile_machdep.h
1999-04-28 09:19:35 +00:00
c22a8166d9
use new loadfile
1999-04-28 09:18:47 +00:00
3e9afa8b4d
- Save Mach_splX() calls which don't fit well with DECstation. MIPS
...
spl machinary will be reworked, someday.
1999-04-27 08:07:26 +00:00
aa89ae23ba
Last fix broke kbd and mouse input under X for the console device. Fixed.
1999-04-26 23:26:11 +00:00
0c221127eb
More fixes to get the PXG working and keep the PX happy.
1999-04-26 12:05:11 +00:00
e54fa8abad
Fix silly bug where fbconnect() doesn't realize that it's already been
...
called during early console initalization, then pouts because there appears
to be n+1 framebuffers. This whole thing is a mess.
1999-04-26 12:03:53 +00:00
9e798fbe20
- Forgot to commit these two.
1999-04-26 09:36:05 +00:00
c33ad91e49
- Sweep machdep.c; mostly imported from a development branch. Little
...
exposure of TC device any more. Correct comments which are no longer
feasible. Reorder declarations and definitions. Introduce 'clkread'
pointer to pull up model dependent high resolution timer value. Have
prom_systype() call.
- Place routines for model dependent high resolution timer.
- Program IOASIC registers inside os_init() call and nuke ioasic_init().
1999-04-26 09:23:21 +00:00
d52e1e73df
Add cdev declaration for `px', major 98.
1999-04-26 04:42:10 +00:00
4e3888516e
Many fixes to support PXG, PXG+ and PXG+ Turbo. Interrupt handling is
...
totally broken for the PXG and will remain so until more documentation is
available. This destroys the queueing, hardware clipping, and VDAC update
mechanisms on the PXG.
1999-04-26 04:37:33 +00:00
6db752a5c1
"px.h" requires inclusion.
1999-04-26 04:34:00 +00:00
98fc8dbc76
`pm' device can also be 8bpp - fix dependancy line.
1999-04-26 04:32:05 +00:00
b83c863839
Fixed to match rasops config glue.
1999-04-26 04:30:26 +00:00
9c39aaeeca
Add common SYSV* options (from i386).
...
Add "options LKM", since with ELF/ECOFF format kernels it should now work.
1999-04-26 02:20:02 +00:00
666e14b944
pmax kernels now compile with -Wuninitialized.
1999-04-25 04:04:53 +00:00
59df0560f4
Set the colormap index before checking it!
1999-04-25 04:04:16 +00:00
d2bd346fb8
Shut 'gcc -Wuninitialized' up (including a real case I missed with ddb
...
symbol initialisation).
1999-04-25 03:20:45 +00:00
f676307241
Include "px.h" - rcons_connect_native is only compiled in of NPX > 0.
...
Fixes PR port-pmax/7456 from Jason Thorpe.
1999-04-24 15:22:45 +00:00
dc1d3940db
Nuke register and remove trailling white space.
1999-04-24 08:01:01 +00:00
6f6573cb10
Move BOOTINFO_ADDR up to 0x8001fc00, and reduce the maximum size of a
...
bootinfo record to 1kB (we are using less than 200 bytes now) so that it
doesn't run into addition PROM memory.
At 0x8001f00 the bootinfo record was stomping on some memory used by the
SFB cards for font information.
1999-04-22 01:52:54 +00:00
a895fbfd58
Define rcons_connect() only if (NFB > 0). Define rcons_connect_native() only
...
if (NPX > 0). Needed for fixed `rasops' config glue.
1999-04-22 00:33:30 +00:00
ca39efe84c
Remove misplaced comment.
1999-04-22 00:29:59 +00:00
25715bb0f2
Comment out 'config nfsnetbsd'.
1999-04-21 12:53:56 +00:00
24323d7ef4
In cpu_startup():
...
+ Initialise minaddr to the start of the file I/O buffers.
+ Check for overallocation of RAM for these buffers.
+ Change function name in panic message to match reality.
Code taken from almost every other port, and fixes the:
uvm_km_suballoc: unable to allocate space in parent map
panic that some people have been experiencing.
1999-04-21 02:03:24 +00:00
ad52a7fe49
make this compile again with no rcons.
1999-04-20 06:42:54 +00:00
dc3b870fce
Add NFS_BOOT_DHCP so that netboot kernels can find the root filesystem.
1999-04-20 05:56:52 +00:00
1065cb27a3
s/NFS_BOOT_BOOTP/NFS_BOOT_DHCP/
...
DHCP is a superset of BOOTP, and still works with BOOTP servers.
1999-04-20 05:54:44 +00:00
cbd32a724f
Sync with rev 1.9 of sys/arch/i386/stand/lib/loadfile.c:
...
another nit in error handling: don't try to print out a NULL
filename (which means "use default" and is dealt with properly
by open())
1999-04-17 11:24:16 +00:00
0993fa2727
Add configuration glue needed by rasops, wsfont, rcons and the px driver.
1999-04-13 18:53:27 +00:00
cf19d10b2a
Added console initalization glue to allow `px' device to function as the
...
console.
1999-04-13 18:50:51 +00:00
8cd2881c35
Save colormap when fb device is opened, and restore upon close. Do not
...
fbconnect() 'pm' device again at attach time if it is the console.
1999-04-13 03:22:00 +00:00
46dcc25b4a
Map keypad 'Enter' to 'Return' for console operation. Change error messages
...
in MouseInit() to allow gcc to fold the strings.
1999-04-13 03:19:28 +00:00
7940da64de
Define PMAX_FBTYPE_PX. Changes to allow fbvar.h to be included with
...
dev/rcons/rcons.h.
1999-04-13 03:14:03 +00:00
de43e7cc8d
Fixed licensing due to a foobar on my behalf.
1999-04-13 00:40:07 +00:00
b30fc08f22
Initial import of `PX' driver.
1999-04-13 00:30:08 +00:00
b13e5d1469
Quote "AS IS" as in the majority of Carnegy Mellon notices.
1999-04-12 20:38:17 +00:00
b84e038e4b
Bump version number to 1.1 for default kernel names.
1999-04-12 05:46:57 +00:00
71c3fc3251
If only a device name is specified with no kernel name, try to load a
...
kernel from a default list of names. This list is netbsd, netbsd.bak,
netbsd.old, onetbsd and gennetbsd - all without and with a .gz
extension.
1999-04-12 05:19:25 +00:00
ab3de4de0e
Make the bootpath "N/rzY" with no trailing '/' valid by adding the extra
...
'/' before appending 'boot' to the path.
1999-04-12 05:14:51 +00:00
520c13bcc8
Fix an off-by-32 error - space was padded out to the 96th byte for the
...
DEC disk boot block header, but it's only 64 bytes long. Gives us
another 32 bytes in the first stage.
Don't use a roll-your-own START_FRAME size and offsets for the stack
and ra - use the <mips/asm.h> provided CALLFRAME_SIZ, CALLFRAME_RA and
CALLFRAME_SP
1999-04-12 03:53:13 +00:00
0a7e699d22
Add "WARNS?= 1" - woohoo!
1999-04-11 04:31:02 +00:00
cdc059d0d0
Use BOOTRZ instead of BOOTXX.
...
Add -DLIBSA_NO_DEV_IOCTL.
1999-04-11 04:28:14 +00:00
6247c771c1
Use BOOTRZ instead of BOOTXX.
...
Add a PROM callback for prom_close if not LIBSA_NO_DEV_CLOSE.
1999-04-11 04:27:53 +00:00
deb30f311a
Include <common.h> to get prototypes for PROM callbacks.
...
Use LIBSA_NO_DEV_CLOSE and BOOTRZ instead of SMALL.
In rzclose() call prom_close() on the descriptor if we're on a
pre-REX machine.
1999-04-11 04:27:30 +00:00
b2706c76c1
s/vmunix/netbsd/
...
Use BOOTRZ instead of SMALL.
1999-04-11 04:26:31 +00:00
558e5709dd
Use LIBSA_NO_DEV_CLOSE and LIBSA_NO_DEV_IOCTL instead of SMALL.
1999-04-11 04:26:06 +00:00
bc48dfc927
Clean up prototypes.
...
Print a message on failure to load or execute kernel.
1999-04-11 04:25:47 +00:00
f1e493608f
Move MKMAN to ../Makefile.inc.
1999-04-11 04:25:15 +00:00
c8ba78a09e
Move BINDIR, BINMODE to Makefile.inc.
...
Remove -DSMALL.
Define an empty LIBZ if building first stage bootblocks since LIBZ
defaults to /usr/lib/libz.a.
1999-04-11 04:24:41 +00:00
96fba8337e
Define BINDIR, BINMODE and MKMAN in the "standard" place.
1999-04-11 04:19:56 +00:00
9498a6da95
Clean up prototypes and entry variable usage.
1999-04-11 04:08:25 +00:00
2fb264a52e
Declare some prototypes for the pmax-specific libsa functions.
1999-04-11 04:05:46 +00:00
f455dd6596
add a `flags' argument to uvm_pagealloc_strat().
...
define a flag UVM_PGA_USERESERVE to allow non-kernel object
allocations to use pages from the reserve.
use the new flag for allocations in pmap modules.
1999-04-11 04:04:04 +00:00
39b90701da
Include <stand.h> so we get a putchar() prototype.
1999-04-11 04:03:29 +00:00
cda54b761e
Apply rev 1.8 of sys/arch/i386/stand/lib/loadfile.c:
...
fix error handling: almost all errors were ignored
YES, this will be made MI soon...
1999-04-10 01:52:33 +00:00
be4160066d
Allow the fake installation diskimage to be 2MB as well as 32MB in size.
1999-04-08 13:55:37 +00:00
dd8e585cec
- MIPS processors do not require to have memory barrier prior to read ops.
1999-04-08 03:14:35 +00:00
c40eb1cd97
Fix a pasto in copyright text which has been procreating like rabbits..
1999-04-06 20:09:18 +00:00
b1ec416993
Don't build a.out kernels anymore.
1999-04-06 06:16:07 +00:00
e6ab4443a2
Mention a few other (not implemented) space saving ideas in case we
...
get desparate in the future.
1999-04-01 08:47:38 +00:00
f36bd65f46
Build the full MI libsa for the first stage bootblocks rather than
...
picking the bits we wanted explicitly, taking advantage of some of the
recent code-size trimming from cgd. There's now no duplication if libsa
code in sys/arch/pmax/stand.
As a bonus, we now have 416 bytes free in stage one (up from 80), and
will all of Chris' space saving options enabled (these are commented out
in scsiboot/Makefile), theres over a 1kB free.
1999-04-01 06:05:04 +00:00
971284a4ed
Add support for LIBSA_SINGLE_DEVICE and LIBSA_SINGLE_FILESYSTEM.
1999-04-01 05:52:38 +00:00
967b8c433c
Don't call configure() from cpu_startup().
1999-04-01 00:17:45 +00:00
ff2206f6df
G/C UFS_NOSYMLINK, UFS_NOCLOSE and UFS_NOWRITE and use new LIBSA_NO_FS_*.
1999-03-31 07:43:39 +00:00
4c9bbd20fb
Don't define errno expliticly, use libsa/errno.c in first stage and
...
${LIBSA} in the second stage.
1999-03-31 07:23:27 +00:00
febdc0ddf2
Use recent LIBSA_NO_TWIDDLE support.
1999-03-31 04:30:11 +00:00
0f4c2803ca
Create/build vers.c/vers.o inside the final link stage so that the build
...
datestamp get's updated each build.
1999-03-31 03:10:56 +00:00
5fbc10c671
Reorder ${LIBS} so that we don't need to explicitly pull in bcmp.c
...
and bzero.c from libkern.
1999-03-31 02:35:14 +00:00
2f9a4a8d93
regdef.h is back
1999-03-30 18:38:32 +00:00
45b35a036e
regdef.h is back
1999-03-30 14:20:43 +00:00
a63b96d0c4
Don't install sysconf.h - nothing is exported to userland in this file.
1999-03-30 02:19:02 +00:00
a487471f7c
Remove bogus comment.
1999-03-29 13:48:25 +00:00
1902d11a08
- Minor formating knots. No functional change.
1999-03-29 05:56:29 +00:00
9c02b3c942
Add enabled options NETATALK and IPFILTER_LOG, and disabled PPP_BSDCOMP,
...
PPP_DEFLATE, PPP_FILTER and PFIL_HOOKS
Partial fix for kern/7264 from Greg Woods. Too much variance in all
ports GENERIC config files to do across the board right now.
1999-03-28 06:17:40 +00:00
9d77f4eb40
Use COPTS="-Os -mmemcpy" for INSTALL kernels - saves ~15kB in text.
1999-03-28 05:46:53 +00:00
dcc82eccf1
Also comment out inclusion of "builtin.5100" to stop pulling in 5100
...
devices.
1999-03-28 03:02:49 +00:00
10ab7f42f7
Protect the variables used during the DDB symbol calculations with
...
an "#ifdef DDB".
1999-03-28 01:56:41 +00:00
1a74785d0a
Remove "md" - we have a specific INSTALL kernel, so we don't need "md"
...
on the GENERIC kernel. Pointed out by Erik Fair.
1999-03-27 15:31:50 +00:00
4436f7ad26
Uncomment ipfilter and rnd, add md.
1999-03-27 11:10:25 +00:00
28b36b37a5
Remove trailing white-space.
1999-03-27 08:15:29 +00:00
25cde9b010
Disable 5100's for now - it doesn't work yet, so we may as save a little
...
bit of space...
1999-03-27 07:40:08 +00:00
516865d17c
Enable now that "make depend" works properly.
1999-03-27 07:39:06 +00:00
d44e9483b0
Go back to a Makefile.booters scheme, like most other ports do. No
...
more problems for "make depend" - tested with and without obj dirs.
1999-03-27 07:17:50 +00:00
ef619b1714
The ECC handling was broken when the common handling was split out of dec_3max.c
...
and dec_3maxplus.c. The ERRSYN/CHKSYN register contains data, not an address.
Pass the address of the register rather than the contents to dec_mtasic_err()
instead of the register contents so it can read/write the register.
Correctable memory errors won't trap in dec_mtasic_err() anymore.
1999-03-27 03:27:09 +00:00
9c6b797796
Changes for modified pmap_enter() API:
...
* Map the message buffer with access_type = VM_PROT_READ|VM_PROT_WRITE `just
because'.
* Map the file system buffers with access_type = VM_PROT_READ|VM_PROT_WRITE to
avoid possible problems with pagemove().
* Do not use VM_PROT_EXEC with either of the above.
* Map pages for /dev/mem with access_type = prot. Also, DO NOT use
pmap_kenter() for this, as we DO NOT want to lose modification information.
* Map pages in dumpsys() with VM_PROT_READ.
* Map pages in m68k mappedcopyin()/mappedcopyout() and writeback() with
access_type = prot.
* For now, bus_dma*(), pmap_map(), vmapbuf(), and similar functions still use
access_type = 0. This should probably be revisited.
1999-03-26 23:41:25 +00:00
d0e107a1a5
Update copyrights.
1999-03-26 05:23:58 +00:00
4fefe2cb37
Conditionally set BINMODE and BINDIR so lower level Makefiles can override
...
the location or modes.
Fix up the machine and mips symlink creation.
1999-03-26 02:12:17 +00:00
461afc9079
Explictly set BINMODE to 555 so that ../Makefile.inc doesn't override it.
1999-03-26 02:07:55 +00:00
567cda0537
Don't bother allocating mb_map on these systems. Mbuf clusters are
...
allocated from a pool, and the MIPS and Alpha use KSEG to map pool
pages. So, mb_map wasn't actually being used. Saves around 4MB of
kernel virtual address space in a typical configuration.
Garbage-collect the related VM_MBUF_SIZE constant.
1999-03-26 00:15:04 +00:00
1132034fe8
If the clock speed is less than 15MHz, we're on a 2100, otherwise a 3100.
1999-03-25 19:55:37 +00:00
e432668f46
callvec.c moved in stand again...
1999-03-25 12:56:18 +00:00
aff677bcae
Updates for new bootblocks.
1999-03-25 12:24:56 +00:00
5010ae76c0
Remove old (not-enabled) local support for loading kernels.
1999-03-25 12:16:04 +00:00
b295b577e1
Second stage bootblocks based on original single stage blocks.
1999-03-25 12:11:41 +00:00
2dde1643c2
Makefile for /boot.
1999-03-25 12:10:12 +00:00
7c060ce391
Version info for bootblocks.
1999-03-25 11:57:41 +00:00
26098f27a2
Emtpy twiddle() to save space in stage 1 bootblocks
1999-03-25 05:28:36 +00:00
b9b7830d05
Unused now.
1999-03-25 05:27:00 +00:00
1e80ec96a0
Only include the dec disklabel at the start of BOOTXX is defined.
1999-03-25 05:23:48 +00:00
fb11e9e236
Remove unused debugging code, and clean up an error message.
1999-03-25 05:22:44 +00:00
f490a639c9
Not needed at the moment - may be resurrected when netboot comes along.
1999-03-25 05:19:44 +00:00
a160a47e1b
Fix header botch in previous.
1999-03-25 05:17:49 +00:00
e213504efd
Call main instead of _main.
1999-03-25 05:17:27 +00:00
c80fb4ccb8
Change from loading an a.out kernel to an ELF /boot.
1999-03-25 05:16:06 +00:00
0e44e536a0
Include <machine/stdarg.h> and not <stdarg.h> - found by adding
...
-nostdinc to CPPFLAGS.
1999-03-25 05:13:15 +00:00
7607cac7b3
CVS repository copy to bootxx.c
1999-03-25 04:42:06 +00:00
70bc63765d
CVS repositary copied to ../scsiboot. These are small routines and/or
...
PROM callbacks used only by the first-stage disk bootblocks. Other
bootloaders use libsa/libkern.
1999-03-25 04:34:03 +00:00
ec6b2370d9
CVS repositary copied to ../lib.
1999-03-25 04:22:04 +00:00
e6469a71aa
Makefile* of pmax specific SA library - based on i386/stand/lib Makefile.
1999-03-25 04:16:15 +00:00
88eed19213
Oops, forgot RCS header and copyright.
1999-03-25 04:14:03 +00:00
50e9ee5706
Assembly routine that takes an entry point, new stack pointer address
...
and six extra arguments. Sets up the stack pointer with the arguments
in the right registers/stack positions and calls the entry point.
1999-03-25 04:08:59 +00:00
c7c8021a29
Basic putchar() implentation in terms of the PROM's printf() callback.
...
Not really effecient, but there isn't that much printf'ing down by SA
programs and we can use the libsa printf() so things like "%ld" work.
1999-03-25 04:02:57 +00:00
0f203c7d99
Use "make ... echo ${MACHINE}" to get the machine name so
...
that this script is MI. Just need to find the right place
for it now - suggestions welcome...
1999-03-25 03:56:00 +00:00
246f0aacde
Copy of sys/arch/sparc/common/newvers.sh.
1999-03-25 03:52:12 +00:00
c06d325aaa
Copy of sys/arch/i386/lib/loadfile.h with tweaks for the pmax.
1999-03-25 03:41:58 +00:00
6c24c1c864
When loading an a.out kernel and keeping the exec header, if it's OMAGIC
...
put the exec header below kernel text.
1999-03-25 03:38:53 +00:00
4ba6c44ef4
s/BOOTINFO_MAXSIZE/BOOTINFO_SIZE/
1999-03-25 03:35:39 +00:00
afc2e41e04
Change multiple spaces to tabs.
1999-03-25 03:34:28 +00:00
be62523806
Remove trailing whitespace.
1999-03-25 03:33:58 +00:00
674c1ff8f1
Check KN03_INTR_PROD_JUMPER in the IOASIC INTR register to test if we
...
are running on a 5000/2x0 or a 5900, and set cpu_model accordingly.
(Test from Tohru Nishimura).
1999-03-25 03:03:59 +00:00
3a2b42eeca
Add KN03_INTR_PROD_JUMPER (from Tohru Nishimura).
1999-03-25 03:00:18 +00:00
03ca5d05cf
Remove trailing whitespace.
1999-03-25 01:17:51 +00:00
50897b84e0
Direct copy of sys/arch/i386/stand/lib/loadfile.c.
...
XXX: This should probably be MI in sys/lib/libsa. After 1.4...
1999-03-24 23:51:26 +00:00
b4848d6b90
Code to initialise and add bootinfo records.
1999-03-24 23:47:37 +00:00
71bb7683db
Initiailise to bootinfo pointer to NULL. In lookup_bootinfo(), if the
...
bootinfo pointer is NULL, just return instead of trying to make use of it.
1999-03-24 12:59:15 +00:00
ca5f9685bb
clean up kernel/config files files for machVM lossage.
1999-03-24 06:06:09 +00:00
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
0ba02670be
New bootblock directory structure.
1999-03-24 02:07:22 +00:00
0074502b0a
o Add bootinfo support by checking the fifth and sixth arguments for a
...
magic number and a pointer to the bootinfo data.
XXX: A bootinfo_magic record is not checked for at the moment, even
though test bootblocks initialise the bootinfo data with one.
o Use the bootinfo symtab information in preference to searching for a
valid a.out exec header after _end for initialising DDB.
XXX: Should retire a.out exec header support altogether. Loosing the
ability to load symbols from old bootblocks isn't much of a loss.
After 1.4?
o Add "booted kernel" machdep sysctl.
1999-03-24 01:49:10 +00:00
729eda4324
Define a bootinfo record and initial structures that the pmax will use.
...
Modeled on i386 and bebox bootinfo.h.
1999-03-23 22:53:02 +00:00
c9e3b47a0f
Don't build anything while bootblocks are being updated.
1999-03-23 22:23:11 +00:00
41febd3a3c
Move DB_{AOUT,ELF}_SYMBOLS (and DB_ELFSIZE) definition to port-specific
...
db_machdep.h file.
1999-03-23 22:07:06 +00:00
76fa1751fe
Add a macro to check for sufficient pointer alignment in bus.h context,
...
"BUS_SPACE_ALIGNED_POINTER()".
Equal to the param.h "ALIGNED_POINTER()" normally, but obeys additional
requirements of the bus_space_xxx_n() macros. (BUS_SPACE_DEBUG)
1999-03-23 21:29:03 +00:00
8fcaa99d1b
KNF nits.
1999-03-22 13:08:51 +00:00
3ce634a350
Added support for cursor keys, function keys and friends. kbdMapChar now
...
returns 'char *' to do this. Codes returned for the various keys match
what 'rcons' termcap entry expects.
1999-03-22 03:25:29 +00:00
46c6663ce4
Don't prototype ioasicprint() - the prototype is now in
...
dev/tc/ioasicvar.h and we don't use it here anyway.
1999-03-18 06:37:35 +00:00
bc533621ed
defopt MINIROOTSIZE
1999-03-17 18:59:21 +00:00
ed09809062
- Final cut of TC decoulping.
1999-03-16 05:59:01 +00:00
bfdc9ed402
- Remove a verbose local variable.
1999-03-15 12:03:50 +00:00
eed42e945e
- 'DECstation 5100' -> 'DECsysytem 5100'.
1999-03-15 11:45:16 +00:00
5871c2b95d
- Fix config option name for 3MAX+.
1999-03-15 11:41:25 +00:00
c72be5c489
Eliminate a divide by 40 from the microtime() path on 50Mhz decstatinos
...
by approximation using 41/2048. Gains one bit in NTP precision.
1999-03-15 09:47:36 +00:00
5965639381
Do lk201 non-keyclick setup even when LK_KEY_CLICK not configured.
1999-03-15 09:40:56 +00:00
6335e6c176
- Rearrangement for TC decoupling with some typo fixes.
1999-03-15 07:52:05 +00:00
210ea7eabe
- Decouple "ibus" from TURBOchannel.
...
- Nuke mainbus_softc definition (it's empty).
1999-03-15 07:43:05 +00:00
10b5625b87
- Nuke old leftover; round three. Remove never-used functions.
...
XXX Needs to eliminate TURBOchannel exposure here.
1999-03-15 01:54:56 +00:00
ef79649fc1
MI ioasic softc and child-device structs, gc duplicate struct definitions.
...
Add MI ioasic functions, but dont enable on alpha until tested.
1999-03-15 01:25:26 +00:00
c1122adb50
delete netbsd.aout and netbsd.ecoff in "make clean"
1999-03-15 01:12:00 +00:00
78bc84c223
Clean up initializers for pmax ioasic children. Use same struct as alpha.
1999-03-14 23:59:53 +00:00
e662ad5ecc
Clean up names for SCC interrupt bits.
1999-03-14 23:59:03 +00:00
e4dd1abb05
Merge contents of filesystem.c into conf.c, and remove declaration of
...
errno from conf.c and put it in boot.c.
1999-03-14 00:57:06 +00:00
7482575685
regdef.h is gone
1999-03-13 11:24:59 +00:00
0265284ce4
This file is unneeded since <mips/regdef.h> went into <mips/asm.h>.
1999-03-13 11:24:11 +00:00
2b8eb20358
Remove unneeded <mips/regdef.h>. Its contents went into asm.h while ago.
1999-03-13 11:20:55 +00:00
e846ee9b9b
- Nuke old leftover; round two. XXX Still there 3MAX's IOASIC disguise.
...
Rework will be done in conf/files.pmax, anyway.
1999-03-12 08:15:27 +00:00
57edf91cbc
- Nuke old leftover bogocities, round one; externs for non-existent
...
functions, less-intuitive #define's in inappropriate header files.
1999-03-12 07:13:14 +00:00
f875c6618a
- Exclude 'tc_machdep.h' from installed in /usr/include/machine/ directory.
1999-03-12 07:03:21 +00:00
3ca216fd8a
fix NRND usage
1999-03-09 00:37:01 +00:00
7c40ddedec
- Nuke old leftover. This has no useful information and not used by any
...
other files.
1999-03-04 01:48:09 +00:00
5129c4fcd5
Fix spel in comment.
1999-03-03 06:46:02 +00:00
74c847de33
Fix up eliding nested interrupts.
1999-03-02 12:23:58 +00:00
19ad1c6c19
Re-enable 3MIN clock intrs after servicing. Prepare to do same for ttys.
1999-03-02 09:37:35 +00:00
004971519d
Do callouts for IOCTL asic lance interrupts before SCSI callouts.
1999-03-02 09:24:17 +00:00
d9c1c30e0e
If we get an error (file or bootblocks too big), unlink xxboot and
...
bootxx and exit(1) so a make will fail. Especially in the too big
case, we don't want a make to work!
1999-03-01 11:52:34 +00:00
19893da01b
Add a callback to the PROM routine clear_cache. Not needed now, but
...
used in two-stage bootblocks.
1999-03-01 04:05:18 +00:00
33fe56f80f
Fix prototype for clear_cache (takes an address and length, not void).
1999-03-01 04:01:50 +00:00
19221fa28e
A 5800 is a kn5800.
1999-03-01 00:18:13 +00:00
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
e73260106c
This stuff is _hopelessly_ out of date, and will almost certainly never
...
be used again. (Famous last words :-)
1999-02-24 14:26:25 +00:00
61b327c2ac
Remove bootconf.c from CLEANFILES; not used anymore.
1999-02-24 13:54:54 +00:00
68a5ad19be
Fix off-by-one width: 220, not 221. confirmed against PROM setup.
1999-02-23 01:35:56 +00:00
381c553a53
Use -Os to reduce code size (from Krister Walfridsson).
1999-02-23 01:23:26 +00:00
ffa92484e2
Update cpp defines to current reality.
1999-02-22 11:57:18 +00:00
74f2d414ef
Load the bootblocks at 0x8070000 so that ramdisk kernels don't
...
overwrite the beginning of the bootblocks.
1999-02-22 11:53:57 +00:00
69ba0d255c
Update list of source files to reflect reality.
1999-02-22 11:31:46 +00:00
c3baaf3ba5
Lightweight memset routine.
1999-02-22 11:26:15 +00:00
31f50e4868
Assembly stubs to PROM callback routines.
1999-02-22 11:22:40 +00:00
80ef484669
Use sys/lib/libsa/ routines now.
1999-02-22 11:21:21 +00:00
74df4f53e0
Allow code in sector zero (from Michael Hitch).
...
Also in start.S:
+ Removed unused printf routine.
+ Removed unused dummy __main for gcc.
+ s/bzero/memset/.
1999-02-22 11:01:43 +00:00
09cca9e076
Don't use the conf.c->bootconf.c guff, remove last tape support,
...
and actually install the bootblocks.
1999-02-22 10:53:13 +00:00
3d6a630813
Break single read and printf of text+data into two separate reads and
...
printfs. Better aesthetically, especially with a twiddle.
1999-02-22 10:23:53 +00:00
63e306cbe7
Use "#ifdef UFS_NOCLOSE/UFS_NOWRITE" instead of "#ifdef SMALL".
1999-02-22 10:18:40 +00:00
6932c61287
Use memset() instead of bzero().
1999-02-22 10:16:52 +00:00
e87d6bf17e
More tape support not needed.
1999-02-22 09:25:16 +00:00
50ae7be229
Don't implicitly type the devopen() function.
...
Don't include machine/dec_prom.h.
1999-02-22 08:24:47 +00:00
2e4a4cb289
Revert to a simple memcpy implementation - a memcpy() PROM callback is not
...
available on all DECstation models.
1999-02-22 08:22:21 +00:00
2407241a09
Sync with sys/lib/libsa/ufs.c. Now the same except for the memset/memcpy
...
#defines at the top.
1999-02-22 08:16:57 +00:00
ddf48f18a0
Remove traces of tape support - we're nowhere near handling it at the
...
moment.
1999-02-22 07:17:44 +00:00
6e065bd434
Use cpu_spl3() for all device-level spls, not splhigh().
...
Lets reset button work when stuck at device spl.
1999-02-18 10:24:16 +00:00
ce3b5f2c3f
Adjust cursor offests so that cursor position reported by X applications
...
agrees with pointer. Fron PR 6648 (not verified at all resolutions.)
1999-02-17 01:04:10 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
e07978e871
Split the "mips" MACHINE_ARCH for 1.4. newsmips is "mipseb"; pmax is
...
"mipsel".
1999-02-09 17:15:51 +00:00
3fa9c3ec91
garbage-collect `options MULTICAST'. IP multicast is no longer an option.
1999-02-07 07:14:21 +00:00
ac38e160d1
Add `strip' line for testing Ricochet modems at 115200 bps.
1999-02-07 07:12:19 +00:00
9ec88780aa
size_t and void*-arithmetic changes from sys/libsa/ufs.c.
1999-02-01 03:08:05 +00:00
45f13be5cb
use memcpy, not bcopy, for non-overlapping copies.
1999-02-01 02:46:59 +00:00
22cbe4abc1
Add a comment that the bcopy #define that uses the PROM's memset don't
...
handle overlapping copies. From Jonathan Stone.
1999-02-01 02:18:46 +00:00
52bd8c333b
- Nuke USPACE for now-defunct 'nullproc' pcb (8KB saving).
1999-02-01 00:32:18 +00:00
cbbad6d2b2
Add bzero/bcopy defines to use PROM memset/memcpy.
...
Change test to include defines from
#ifndef _KERNEL
to
#if defined(_STANDALONE) && !defined(_NO_PROM_DEFINES)
1999-01-31 13:49:40 +00:00
d0ca7993a0
Remove genpubasym.cf stuff
1999-01-31 01:01:12 +00:00
53e963b5ef
Add -mmemcpy (from Jonathan Stone) and bump -G to 128. Bootblocks now
...
fit! Still needs more testing, so we don't actually install them yet...
1999-01-30 12:57:58 +00:00
98ceefb712
Actually depend on libsa now.
1999-01-30 12:39:28 +00:00
555cdd32e5
Don't define an ioctl routine for the rz driver, nor pull in the empty
...
routines in libsa/dev.c.
1999-01-30 12:30:57 +00:00
1047f11c01
Remove unused callvec stubs and libsa routines, add memcpy.c.
1999-01-30 12:23:10 +00:00
db342dee15
Add memcpy callvec stub, copied from strcat.c
1999-01-30 11:54:31 +00:00
a9f9300b78
Tell how many bytes of code are available, and print a warning if the
...
bootblocks are too large - from Michael Hitch.
1999-01-30 10:14:45 +00:00
500353b4c3
Use DEC_REX_MAGIC instead of a undocumented magic number
1999-01-30 00:40:38 +00:00
e1167d2415
Add REX magic number
1999-01-30 00:36:10 +00:00
ddd6d4cef1
Add some more PROM entry points
1999-01-29 12:05:02 +00:00
15afeeecca
Remove an incorrect (but harmless) comment.
1999-01-29 08:42:27 +00:00
916b809a51
Make a `machine' symlink to ..../pmax/include to locate new location of
...
the dec_????.h files. Gleaned from other ports' stand/Makefile.inc's.
1999-01-29 05:51:15 +00:00
9a3172af0e
Include dec_{boot,exec,prom}.h from <machine/...>, not <stand/libsa/...>
1999-01-29 05:37:45 +00:00
0b2a74160d
Include dec_{boot,exec,prom}.h from <machine/...>, not <stand/libsa/...>
...
Remove unused include files.
1999-01-29 05:33:49 +00:00
3675e80580
Removed unused include file
1999-01-29 05:31:23 +00:00
fe1bdc0a06
Move via repository copy to pmax/include - the kernel uses these
...
includes too.
1999-01-29 05:28:59 +00:00
7bfe0eabb6
Use lk_bell() for audible bell.
1999-01-28 10:35:53 +00:00
9c2700d2b8
Jason Thorpe's changes from PR#6848. Makes 115200 bps work on some systems.
...
Reverse sense of #ifdef to disable 76.8k and 115.2k until we can verify
it works on all 8530 chips (similar changes didnt work on a /240 in 1996).
1999-01-28 10:28:43 +00:00
1962954796
LK201 changes from PR#4519:
...
Add lk_bell() to ring keyboard audible bell (for rcons bell).
Add LK_KEY_CLICK option to reset keyboard and enable keyclick.
(off by default since theres no way to control it from userland yet).
1999-01-28 10:20:10 +00:00
ce856af2ef
Include dec_prom.h with `full' path if being included by kernel.
...
XXX: Should these headers used by the kernel be in pmax/include instead
of pmax/stand?
1999-01-27 05:52:31 +00:00
51dc8fb666
Change location of pmax/stand/*.h include files to pmax/stand/libsa/*.h
...
My bad - wasn't expecting the kernel proper to pull stuff in from stand...
1999-01-27 03:12:24 +00:00
384f5d9970
Remove unused pmax/stand/dec_*.h include files.
1999-01-27 03:03:51 +00:00
3e6e3322d8
Format consistency.
1999-01-24 12:56:51 +00:00
3566c2a4a4
Add NetBSD RCS ids
1999-01-22 14:27:31 +00:00
65fca13b07
More Makefile cleanups:
...
+ Don't use our own "clean" and "depend" targets
+ "make depend" works
+ Only include each include path once on compile lines
+ Clean up include file names
+ Don't build a separate libdrive.a, just specify driver source files
+ Use "make print-objdir" instead of old "printf ... | make -f-"
+ Remove more unnecessary targets, variables and other cruft
Still builds identical bootblocks to 1.3.3 with gcc, still too large
with egcs.
dec_boot.h, dec_exec.h & dec_prom.h were copied via respository
copy to sys/arch/pmax/stand/libsa.
1999-01-22 14:05:05 +00:00
76764712c1
Round one of the Makefile clean up:
...
+ dependency on libsa works
+ set and use BINDIR/BINMODE
+ don't pull in sys/lib/lib{sa,kern}/Makefile.inc (``make clean''
doesn't make empty lib/{sa,kern} directories in each
directory/obj dir).
+ remove unnecessary targets, variables and other cruft
+ wrap lines at 80 chars
Re-ordering SRCS line in libsa/Makefile to a more logical sequence
(alphabetical by source dir) results in a libsa.a with archive members
in a different order, and a resultant bootrz that differs from the 1.3.3
bootrz. Untested as yet, so left in but commented out.
Also, _don't_ install the bootblocks (as per intent of previous commit)
or our own small libsa(!).
1999-01-21 14:16:52 +00:00
ab18b23eba
Add dkcksum.c (pulled in from libsa) and remove local copy of
...
disklabel.c (with it's own copy of the same dkcksum routine). Output
code still identical.
1999-01-21 12:43:11 +00:00
6c2628b5d0
Almost working bootblocks for the pmax. This compiles fine with gcc
...
2.7.2.2-myc2 (and produces _identical_ bootblocks with the 1.3.3
bootblocks which weren't in the tree), but egcs 1.1.1 builds a ufs.o
that's about a 100 bytes too big, and it busts the 7.5k we've got for
bootrz.
Still needs cleanup - the Makefiles could be better/cleaner, and doesn't
install yet (because of above problem). At least there's something to
work with now.
Note that we have our own versions of a lot of the sys/lib/libsa
routines which are less functional/smaller.
1999-01-21 12:33:39 +00:00
64b6a85f9c
Remove obsolete README and dec_label program
1999-01-20 13:37:56 +00:00
47c28b03d8
Move via repository copy to sys/arch/pmax/stand/scsiboot
1999-01-20 12:03:56 +00:00
34410d5d0c
- Fixup imcomplete vm_offset_t purge work...
1999-01-16 07:05:05 +00:00
f714e02733
- Fixup for recent change in arch/mips.
1999-01-16 02:36:01 +00:00
8922647c58
Some minor, mostly costmetic, changes to CPPFLAGS/CFLAGS.
1999-01-15 23:37:05 +00:00
dc306354b0
Move the bswap functions from libutil to libc (this bups the
...
minor of libc and the major of libutil). For little-endian architectures
merge the bnswap() assembly versions with nto* and hton* using symbols
aliasing. Use symbol renaming for the bswap function in this case to avoid
namespace pollution.
Declare bswap* in machine/bswap.h, not machine/endian.h. For little-endian
machines, common code for inline macros go in machine/byte_swap.h
Sync libkern with libc.
Adjust #include in kernel sources for machine/bswap.h.
1999-01-15 13:31:15 +00:00
45a22daf10
allow generated kernel includes and support mips pubassym.cf mechanism
1999-01-15 10:57:36 +00:00
c729b2ffeb
add support for locore_mips[13].S
1999-01-15 10:33:11 +00:00
e598335d1c
Garbage-collect `mbutl'.
1999-01-09 22:10:12 +00:00
fc5f9ee81d
Add -Wpointer-arith warning since `void *' arithmetic is not ANSI C.
1999-01-08 19:26:12 +00:00
9df51b1b1f
- Complete vm_offset_t purge for DECstation.
1999-01-06 04:18:53 +00:00
fa0ee282ff
Read icsr in interrupt handler (from development tree).
1998-11-29 00:58:06 +00:00
34fe177e8e
* Use dc_tty_init() to set serial-console line state both for boot-time
...
console setup and driver attach-time.
* Dont wire potential console lines as CLOCAL; use softcar.
* #ifdef tests on #ifdef NRASTERCONSOLE, not HAVE_RCONS.
1998-11-29 00:28:29 +00:00
cdc3ba978c
Remove last vestiges of console special-case handling:
...
* use dc_coldparam() in dc_tty_init(), dc_kbd_init().
* use dc_tty_init() to set line for serial console in dc_consinit()
* only call dc_mouse_init() if the console major-number is RCONSDEV.
1998-11-28 09:52:55 +00:00
e931618c25
Don't do a mkdep on SFILES if it is empty. Stops an annoying:
...
cc: Warning: `-x assembler-with-cpp' after last input file has no effect
cc: No input files
message.
1998-11-27 01:01:40 +00:00
8eef08e4ae
fix another white space botch
1998-11-27 00:44:46 +00:00
bf95b924c9
White space and comment formatting police
1998-11-27 00:09:33 +00:00
59acb69be1
Add (commented out) 'gre' pseudo device line. Feedback is welcome.
...
Inspired by Klaus Klein.
1998-11-25 20:30:44 +00:00
89cad55ba4
Make rcons work, if configured, even when using serial console:
...
do rcons_connect() even if using a serial console.
identify first attached framebuffer as being `rcons' output device.
1998-11-23 04:26:15 +00:00
475a5c2afd
RZ25 disks seem to need a short delay after a start command; the test unit
...
ready right afterward succeeds, but the getsize following that failed with
a "not ready".
1998-11-20 06:24:02 +00:00
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
20cf682664
kernel config file for pmax install via ramdisk.
1998-11-19 06:05:11 +00:00
fe83804dea
Add md (memory disk) hooks for pmax. ecoff kernel with 2MB ramdisk
...
tftp-boots on new PROMs. (3MB is too large).
1998-11-17 22:41:05 +00:00
cf5710c839
Added a (commented out) configuration line for the RAIDframe device driver.
1998-11-16 16:44:55 +00:00
a3a77d9561
Add skeleton code to defer rcons console output to soft-interrupt time.
...
ifdef'ed out for now.
1998-11-16 00:10:39 +00:00
03b30a046d
* make scc_tty_init() callable when very cold: call scc_coldparam() directly.
...
Use scc_tty_init() in scc_consinit(). Declare scc_consinit() in sccvar.h.
* Remove last vestige of special-case console handling in sccparam() code.
* Call scc_consinit() from findcons scc_serial() console-setup.
Dont PROM for scc serial console at all.
1998-11-15 11:21:52 +00:00
b6111d03f9
Add mainbus0 and cpu* lines to R4000 config.
1998-11-15 06:27:11 +00:00
5ddadfcc95
Remove old model-specific config files.
1998-11-15 06:22:25 +00:00
6317908feb
UVM is now the standard VM system on NetBSD/pmax.
1998-11-15 05:43:32 +00:00
c74d32c5fc
Updating of bdev's and cdev's to support RAIDframe.
1998-11-13 04:47:03 +00:00
7b16048c5a
Fix the Right-Shift on the LK501 keyboard in a different way. My previous
...
attempt results in the up and down arrows not repeating in the X server.
The keyboard division table is modified to place the Right-Shift keycode
into division 6 along with the Left-Shift and Control. A corresponding
change to the X server lk201 keyboard handler is also required.
1998-11-13 01:59:51 +00:00
010e90e0ca
Cursor position offsets need different values for an sfb board with an
...
alternate clock that does lower resolution.
1998-11-06 03:53:40 +00:00
a7f70a5fbc
Fix problem when using non-DEC CDROMS with blocksize other than 512 bytes.
...
This got lost when disk geometry processing was updated.
Also move the CDROM check from rzread() to rzwrite() - it doesn't make
much sense to report a read-only filesystem error when trying to read a
CDROM.
1998-11-06 01:59:25 +00:00
ba531b48c6
Use console_debugger() hook to enter DDB.
1998-10-29 21:25:17 +00:00
5211fed3ab
Michael Hitch's fix to dtop handler:
...
make handler FSM robust enough to not lose its place after data overrun.
stops keyboard from going catatonic.
1998-10-29 04:54:20 +00:00
e9441f3a72
Garbage-collect obsolete "field" intpri from ibus_attach_args.
...
clean up initalizers to use correct, in-range values for ia_cookie,
which is what ibus children passed down to ibus_intr_establish.
1998-10-23 23:01:44 +00:00
0582e98991
Treat Wangtek QIC-150 SCSI tapes the same as Viper, so they work on
...
3100s as well as with the asc driver.
1998-10-22 23:01:45 +00:00
e35fe182af
Remove commented out OPTIONS DEC_5100 line - there was already an
...
uncommented line above for the 5100.
Mention "kn04" (the 5000/150) on the DEC_3MIN options line.
1998-10-20 03:03:04 +00:00
2468738337
change handling of libkern:
...
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way
1998-10-15 18:37:13 +00:00
908cdfe4e3
Add scsibus entry points to the cdevsw[].
1998-10-10 02:00:49 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
d681cf055a
configure() prototype is in <sys/device.h>
1998-10-06 20:50:15 +00:00
463301afbf
Use common date conversion functions - not runtime efficient, but
...
brain-efficient...
1998-09-26 21:02:56 +00:00
1826b0bca2
Use the RTC chip as time-of-year clock, as the PROM console and Ultrix do.
1998-09-26 20:59:42 +00:00
2671c2fa42
Make bus_dmamap_load_uio() work, from Kevin Lahey <kml@nas.nasa.gov>.
1998-09-21 22:51:56 +00:00
008816ea4f
Changes to sys/arch/mips from ARC port, from Noriyuki Soda <soda@sra.co.jp>.
...
Adds (most) support for ARC platform to port-independent mips code.
Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.
Open issues:
* Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
Code derived from Per Fogelstrom's OpenBSD source doesn't work
on mips3 pmaxes with L2 cache.
* Still some port-specific #ifdefs, for interrupt enable and
pmax L2 cache-size. Needs more thought, but overlaps with
work-in-progress by Tohru and Tsubai on spl()s and related stuff.
1998-09-11 16:46:31 +00:00
97acdd4415
A minor error. kn5800, a MIPS SMP machine, was codenamed "ISIS."
1998-09-11 00:06:12 +00:00
d6afdbc88b
Complete to fix errors introduced by HX screen dimension detection.
1998-09-10 10:00:39 +00:00
2c412f42bb
scc_softCAR is a bit array, so set it accordingly for a serial console
...
port (instead of using the scc line number).
1998-09-07 19:54:15 +00:00
a91d61bced
Can't use fi->fi_base to access the resolution registers: it hasn't been
...
initialized yet. Use the base variable, and also use the symbolic symbols
to acdess the registers. Also, the console max_rows is based on the
display height, not the width.
1998-09-07 19:52:49 +00:00
c9db84ecc9
distclean is a synonym for cleandir
1998-09-05 15:15:14 +00:00
a3d9c9bd87
- Clearify what ioasic_init() is for. No runtime difference because
...
NetBSD/pmax does not fully utilize the hardware features.
1998-09-05 05:54:15 +00:00
368fcbd069
- Remove lines make not effects from mainbus.c
...
- Remove direct device driver calls from dec_3100.c. Close PR#5522.
1998-09-05 04:11:04 +00:00
ff9b85d338
cdevsw[] and chrtoblktbl[] arrays were not in sync. Add missing the
...
two entries in chrtoblktbl[] as pointed out by Greg Oster PR#5715.
1998-09-03 07:12:43 +00:00
78aedb2cd3
- kernel boot flag 'd' now means "enter DDB asap" like as other ports.
...
- bump cpu_model[] length as the longest name occupies over 30 characters.
- place machine_arch[] beside machine[] for clearity.
- nuke useless #include directives.
- small scale cleanup in vm_machdep.c
1998-09-02 06:41:22 +00:00
08528c6bd2
remove unnecessary "extern int ncpus" (was also causing egcs warning)
1998-08-29 16:24:25 +00:00
892ab683dc
minor minor KNF nit.
1998-08-29 16:24:03 +00:00
06a7946b7d
register -> int or nothing & egcs warnings cleanup.
1998-08-29 16:21:20 +00:00
ac9132322e
minor minor KNF nit.
1998-08-29 16:16:37 +00:00
af81b233e1
remove unnecessary "extern int tickadj" (was also causing egcs warning)
1998-08-29 16:15:53 +00:00
6b1d637705
add "int" type to interrupt handler typedefs (egcs warning)
1998-08-29 16:15:11 +00:00
3d26a04acb
add "int" type to static tzops array (egcs warning)
1998-08-29 16:14:15 +00:00
e37ce1c5b6
Make spl(9) rountines target port dependent. delay() is also port
...
dependent anticipating a target with high resolution timer available
for on-the-fly re-programming. Enum decstation_t was removed from MI
trap.c.
1998-08-25 01:55:38 +00:00
71c8693225
Add missing "-a" to mkdep line for pmax locore_machdep.S.
...
From Noriyuki Soda.
1998-08-04 20:17:09 +00:00
8ed2fad5f9
Add missing trailing $ to $NetBSD$ line (PR #5530 ).
1998-07-26 09:47:22 +00:00
b454e7c097
Add mainbus0 and cpu definitions, remove extra DS_5100 option.
1998-07-26 09:45:25 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
2fc1260cc0
Implement bus_dmamap_load_uio().
1998-07-17 21:09:59 +00:00
e2ff73afa7
Compute SFB pixel dimensions at attach time for PMAGB-BB users.
...
(qvss-compat needs revision, but should be replaced with wscons anyway.)
1998-07-12 06:26:37 +00:00
d47ea67c1f
Define one page free list, and put all pages on it.
1998-07-08 04:43:18 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
bb85c60cdc
Add "mainbus0" and "cpu*" entries that used to be in std.pmax. GENERIC
...
should now 'config' without errors.
1998-07-03 20:06:09 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
21592147a1
defopt COMPAT_ULTRIX
1998-06-25 23:27:56 +00:00
df7a377771
Correct the ioasic interrupt symbol definitions for MAXINE ISDN.
1998-06-22 11:57:47 +00:00
4f688e084b
* Garbage-collect ancient 4.4bsd model-specific aliases for
...
ioctl asic interrupt masks.
* include sys/dev/tc/ioasicreg.h, not pmax asic.h (as prep for merge).
1998-06-22 09:37:40 +00:00
5d58262d89
* Update pmax db_init() to match db_aout.c rev 1.19 (tv's Shark changes).
...
Add headers to get prototype of db_init().
* Copy i386 logic for entering Debugger() if RB_KDB set on entry.
1998-06-19 22:44:48 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
0b25bb43b3
Adjust bus_dmamap_sync() for the R4000; in that case, use the stashed
...
virtual address for the segment, rather than the physical address, and
adjust the cache call appropriately.
1998-06-03 05:10:23 +00:00
63be85fc62
Fill in the virtual address of each DMA segment as we load the map.
1998-06-03 04:41:30 +00:00
691e8af708
Add a "virtual address" private member to the pmax bus_dma_segment_t, for
...
use in R4000 cache flush operations in bus_dmamap_sync().
1998-06-03 04:38:41 +00:00
47724b2eb9
Sync w/ i386 port.
1998-06-03 04:33:28 +00:00
c13f81fd52
Correct some comments.
1998-06-01 19:33:59 +00:00
a7f360c6c9
Specify a non-profiling C rule.
1998-05-31 23:25:41 +00:00
5c082547cd
Add fat since it now works.
1998-05-28 00:57:55 +00:00
e208d8972b
Ouch, key debugging printfs off BUS_DMA_DEBUG, not DEBUG ... noisy!
1998-05-27 03:57:49 +00:00
3dc4f22908
A few fixes to make it really work.
1998-05-27 01:16:47 +00:00
4631dca956
Rewrite at least the R{2,3}000 case for bus_dmamap_sync(), in hopes of
...
making performance of bus_dma drivers not completely suck on the DECstation.
XXX R4000 case is still abysmal, because some other data structure
modification is required to deal with the virtually-indexed R4000 cache.
1998-05-26 18:21:10 +00:00
7a1e3fe2ea
Allow serial consoles *without* any graphics devices.
1998-05-23 18:21:43 +00:00
c8092e5d3b
Provide bus_space and bus_dma data structures to the TurboChannel bus.
1998-05-22 21:14:40 +00:00
7a9c58e1b1
Complete from-scratch rewrite of the DECstation bus.h, brining it
...
up-to-date with the current API, and implementing preliminary
support for bus_dma.
1998-05-22 21:14:04 +00:00
bd9ed5a6fd
STANDALONE->_STANDALONE (cpp definition)
...
closes PR kern/5481 (Erik Bertelsen <erik@q610.ebe.uni-c.dk>)
1998-05-22 12:56:35 +00:00
aaf43a156e
Make this build for a 3MAX-only kernel.
1998-05-21 17:41:29 +00:00
76e48472e6
Include pmax/pmax/pmaxtype.h for definition of DS_PMAX
1998-05-19 04:31:27 +00:00
469658d533
- Allow all valid SCSI id's to work on the SII and first two ASC
...
controllers (including SCSI id 7 on the 2100/3100).
- On the pmax (2100,3100) set the host SCSI id to 6.
- Move disk and tape config for the second ASC controller from the GENERIC
config file to scsi.pmax so all configurations can use the second
controller.
1998-05-08 00:05:19 +00:00
1686aca01d
Pull in opt_gateway.h as appropriate.
1998-04-29 23:11:00 +00:00
8afb70fa32
Pull in declaration for the variable "cold" in dec_5100_memintr().
1998-04-27 06:10:32 +00:00
cb015e952e
Resync 3max (kn02) support.
1998-04-25 16:29:06 +00:00
6c0abe64fc
defopt NTP and PPS_SYNC, in preparation for adding PPS support.
1998-04-22 07:08:11 +00:00
bd51370674
Fix indexing bug in bt459 colourmap update.
...
Causes symptoms in PR# port-pmax/4174.
1998-04-20 05:24:17 +00:00
bdf3cb0884
* Fix typo in ROM name of mfb (PMAG-AA)
...
* Use TC_ROM_LLEN instead of constant, add space for sentinel.
* Don't print fb dimensions at console-probe time.
1998-04-20 02:46:59 +00:00
fc2608c7a2
Define TC_KV(), TC_C() here for benefit of model-specific TCbus initializers.
1998-04-19 11:16:18 +00:00
bab2163883
Remove kn01var.h. Superseded by ibus.
1998-04-19 10:57:23 +00:00
cf6765a49c
Attach ibus to mainbus.
...
Commit updated dec_3100.c with interrupt-enable code for ibus.
1998-04-19 10:54:54 +00:00
1a283ae18b
Use new ibus attach args.
1998-04-19 10:47:06 +00:00
6525db3fdb
Update dc_ds.c to use new ibus attach args.
...
Garbage collect obsolete front-end from dc.c backend.
Partially clean up console init code.
1998-04-19 10:44:41 +00:00
1116cb8578
Cleanup comment typos.
1998-04-19 10:22:45 +00:00
c7597ae8b8
Rework, based loosely on suggestions from Tohru Nisimura..
1998-04-19 10:18:20 +00:00
02e88fb06e
ibus devices and 5100 attachment.
1998-04-19 08:47:54 +00:00
539856584c
Garbage collect obsolete motherboard options from non-GENERIC kernels.
...
Add "ibus" to configs with 3100 support.
1998-04-19 08:46:50 +00:00
d47bc69126
Rework pmax kernel config:
...
* ibus (virtual bus for baseboard direct-attach deviecs)
* 5100 support, using ibus
* rename "clock" to mcclock for future support of Qbus machiens
* use sys/dev/dec mcclock_pad32 machinery for pmax mcclock
* reworked TC config code.
1998-04-19 08:39:42 +00:00
59125ec0c9
Define delay() for pmax asc driver, mips_mcclock.
1998-04-19 08:22:22 +00:00
85e00b2364
Add -D__pmax__. Leave -Dpmax until all uses changed to __pmax__.
1998-04-19 08:01:01 +00:00
9caaf18836
Rework pmax turbochannel config, as suggested by Jason Thorpe.
...
Also make TC framebuffer-console search table-driven.
Does not yet include "tcasic" layer; there's no such hardware on DECstations
and nothing for a tcasic layer to do.
1998-04-19 07:59:13 +00:00
e487483678
oops, diffs to use dev/dec/mcclock_pad32 were in a different tree. Fix.
1998-04-19 07:54:45 +00:00
c84f4e94d9
Copy alpha/tc/mcclock_ioasic.c (duplicated in pmax/tc/mcclock_ioasic.c)
...
into sys/dev/dec and split into a clockfns layer and a "middle" layer
for other DEC systems which use mcclocks with each onchip byte
register padded out to a 32-bit word.
Clone alpha/alpha/mcclock (also duplicated in pmax port) into
sys/dev/dec, and ifdef for default clockrates on pmax and alpha.
Use new machinery on pmax for ibus,ioasic attached mcclocks.
1998-04-19 07:50:25 +00:00
9873ee237f
Add dependencies on Makefile for SYSVSHM, SYSVIPC options.
1998-04-19 04:51:18 +00:00
d4a24f85d6
Support shared Decstation 3100 and Decsystem 5100 baseboard devices
...
using a virtual "ibus" for baseboard devices.
1998-04-19 02:52:45 +00:00
53c671e26c
Add locore assembler functions to read mips3 cycle counter, and
...
read and write compare register (controls cycle-driven periodic interrupt).
Use cycle counter for microsecond time on mips3, but for now only on
3min motherboards (5000/150). the MAXINE baseboard microsecond
counter is more stable and I don't ave no 5000/260 to test.
XXX clkread() is a mess, it should be rewritten.
XXX should add nanotime() to give inkernel nanosecond resolution,
and then microtime() reworked to use nanotime().
1998-04-19 01:48:34 +00:00
4ea6444493
Decsystem 5100 (aka mipsmate aka kn230) support:
...
* dec_5100.c: sysconf, interrupt, and motherboard (drain writebuffer)
support for 5100.
* support for hardware kludge in 5100: sii DMA buffer is hardware
padded to alternate 32-bit words, not alternating 16-bit halfwords.
* 5100 has no framebuffer, console is wired to serial port 0.
With ibus support, boots as far as exec'ing init, and hangs.
1998-04-19 01:27:02 +00:00
b21bfbde11
Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
...
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
1998-04-12 23:47:41 +00:00
d850158a7e
Garbage-collect pmax_boardtype. Remoe pmaxtype.h includes from TC
...
framebuffer code. Elsewhere, use systype.
1998-03-31 11:32:52 +00:00
e485e43d44
Add writebuffer-flush for Decstation 5400, 5100 which use
...
coprocessor 3 for writebuffer control.
1998-03-31 11:04:10 +00:00
88d943c976
Add emtpy entries for unused systypes between 5400 (0x6) and 5500 (0xb)
1998-03-31 11:00:01 +00:00
57f61ecbbd
Modify TK50 check to also check for a TZ30 tape, and adjust the modesense
...
data length accordingly.
1998-03-30 19:50:47 +00:00
ba4e7c74a9
Remove ancient non-MI pmax/tc/tc.c code.
1998-03-30 10:41:34 +00:00
2f23758d46
garbage-collect "extern int systype"
1998-03-30 09:52:11 +00:00
9d3e5cca36
garbage-collect old integrated frontend from sii backend.
1998-03-30 09:47:51 +00:00
05bfc158d1
Undo previous rev; systype is declared extern in pmaxtype.h (while it lasts).
1998-03-30 09:44:03 +00:00
fff42c01c8
Define IPL_ constants for pmax.
1998-03-30 09:07:08 +00:00
920f9e8dc9
Declarations for shared 3max(kn02)/3maxplus(kn03/kn05) memory
...
subsystem and NVRAM code.
1998-03-30 09:02:03 +00:00
e7e94824b9
Move sprintf() of model string after call to model-specific *_os_init()
...
routine, so that cpu_mhz is set.
1998-03-30 06:45:37 +00:00
ca86fc945e
<pmax/pmax/trap.h> has been obsoleted...
1998-03-30 04:45:50 +00:00
b800227f95
Garbage-collect old code for direct attachment.
1998-03-30 02:34:25 +00:00
e7312dce1d
* Mouse reset blocks waiting for response for mouse.
...
Only initialize the mouse if we are using rcons as the console device.
1998-03-30 02:15:37 +00:00
0e0d7a04aa
Split 3max (kn02) and 3maxplus (kn03, kn05) memory-error handling out
...
dec_3max.c into a shared file. These models have compatible memory
subsystems, the same memory slots, and (apparently) the same error reporting.
Add markers for where MNN probes for configurations with a mixture of
RAM sizes and for Prestoserve NVRAM (in normal RAM slots) should go.
1998-03-29 01:12:14 +00:00
6b2d0fa8a0
* Create /sys/arch/mips/include/intr.h, with extern declaration of
...
interrupt-callout vector from mips locore dispatch code to port code.
* Move branch-emulation declaration to mips/include/trap.h.
* Garbage-collect pmax/pmax/trap.h.
Not needed now pmax/pmax_trap.c is gone, and after above tidy-up.
1998-03-26 12:46:33 +00:00
01be9f533f
Add extern declaration of old "systype" global variable holding model type,
...
until all pmax code uses platform support.
1998-03-26 11:44:28 +00:00
4d3f17a9f7
Garbage-collect oldstyle model-select options from GENERIC.
1998-03-26 11:35:42 +00:00
dd3d062237
Delete a couple of gratuitous printfs.
1998-03-26 06:36:36 +00:00
8a86fd47be
It's Just Wrong to configure a KN02 system slot as an IOCTL ASIC, but
...
since it's currently done that way, nuke the gratuitous printf that
reports the behavior.
1998-03-26 06:35:27 +00:00
38d5126caf
Set cpu_model in the dec_foo_init() functions, make them consistent and
...
descriptive, and print the model before reporting physical memory size.
1998-03-26 06:32:37 +00:00
b6fca1a9c8
The line between "family" and "model" are ... very fuzzy on the DECstation.
...
So, don't bother.
1998-03-26 06:27:57 +00:00
d654444e88
Right now all platforms use the tc_slot_info[] stuff, so put it in a place
...
where everyone can get at it.
1998-03-26 03:12:05 +00:00
17513c206c
make this compile
1998-03-26 01:09:04 +00:00
60e832dc24
Make this compile.
1998-03-26 01:01:13 +00:00
b40a3c98f5
Use an MD name for the FPU-interrupt mask, as in PR # 4399.
...
mips-based Sony news wire the FPU to hard-interrupt 3, rather than 5
as recommended in Kane.
1998-03-25 08:35:39 +00:00
5456233e69
Garbage-collect old warnings.
...
Cvs: ----------------------------------------------------------------------
1998-03-25 07:43:12 +00:00
5aa93520b5
Pause after failing to find the same driver as the PROM.
1998-03-25 07:35:05 +00:00
a47a813037
Reinstate workaround for old PROM (3100) return values.
1998-03-25 07:30:28 +00:00
5dbbcd7d4d
Garbage-collect BRAINDAMAGEd code (see pr 4438).
...
Attachment of keyboards and mice needs more work.
1998-03-25 06:27:32 +00:00
383ff0cb59
* Use new defopt model-specific options and opt files.
...
Replace all DS5000_* and DS3100 ifdefs with ifdefs on DEC_ options.
* Use MI declarations, not pmax-specific, in model-specific init
that uses baseboard (ioasic) registers.
* Further cleanup of machdep.c. Clock-tick still needs more thought.
* Use 'ibus' names for 3100 baseboard devices in MI code.
1998-03-25 06:22:19 +00:00
ee65226ab6
Declarations for shared 3min/maxine memory handler.
1998-03-25 06:04:31 +00:00
dace384659
Update config files after splitting model support.
1998-03-25 04:17:08 +00:00
7c6a97f474
Update GENERIC and R4000 configs after splitting model-speciifc support.
1998-03-25 04:05:35 +00:00
6975dc93a9
Split sys/arch/pmaxpmax/{machdep.c,trap.c} as suggested by Jason Thorpe:
...
* add "Platform" support inpmax/pmax/sysconf.c and pmax/include/sysconf.h
(based on Alpha cpuconf.[ch], with a namechange to avoid clashes with
support for models of MIPS cpus. They differ more than Alphas).
* For each supported model of DECstation, create a separate file
with the support for that model. Use model codenames, since
support is really baseboard-specific and CPU daugherboards can change.
Move code from machdep.c and pmax_trap.c,
Add sysconf (nee "cpuconf") support.
* Rename model-specific functions to match sysconf names.
* Clean up autoconf.c. Use platform callbacks.
* Retire pmax_trap.c.
Leaves I/O bus configuration and console configuration untouched.
1998-03-25 03:57:53 +00:00
6a3abc10f7
Create in rconsvar.h, with exported variables and RCONSDEV.
1998-03-24 09:51:23 +00:00
1c0730217a
Rewrite pmax console-probing code from scratch
...
as pmax/dev/findcons.c:
* Follow the same logic: look for the device the PROM is using.
* If it's a framebuffer and we don't have a driver for it, try other
* framebuffers in PROM search order.
* If no match found, warn user and fall over to serial console.
* if no serial console found, go back to PROM.
Rework tc/scc.c attach routine to give cleaner initialization semantics.
Prune out old 'braindamage' code.
1998-03-24 08:39:02 +00:00
3172e096d3
Move pmax PROM-console I/O callbacks out of pmax/pmax/cpu_cons.c
...
into pmax/dev/promio.c, with decls in promiovar.h.
Remove obsolete cpu_cons.c and old pmax console-probe code.
1998-03-24 08:31:34 +00:00
fd312c64ee
Fix off-by-one botch in cdevsw entries which broke ipf, tun.
...
Rearrange to match existing MAKEDEV entries. Add lkm back in.
1998-03-24 04:17:58 +00:00
6d836436ac
Commit snapshot of pmax console rework as basepoint for 1.3.2 pullup:
...
* Do rcons output properly, using cn_tab->cn_dev which points
at rcons cdevsw entrypoints.
* The pmadx console code was using keyboard (serial) device
(major,minor) for raster consoles with special code in the keyboard
drivers to catch output intended for consoles, pull it off the device
queue, and print them via cnputc().
Ifdef out RCONS_BRAINDAMAGE.
* Other minor cleanup to pmax scc driver.
1998-03-24 00:23:55 +00:00
9a8dbd75df
Clone lk20.h (keycode definitions) to /sys/dev/dec.
...
Update source pmax files accordingly.
cvs remove old pmax/dev/lk201.h.
1998-03-22 09:27:07 +00:00
e1cc91fde3
Elimiate whitespace KNF botches due to emacs/X cut-and-paste.
1998-03-22 07:56:28 +00:00
456c5d02c4
oops, forgot more whitespace changs and alpha_mb() -> tc_mb().
1998-03-22 07:25:40 +00:00
5cfab7fb5b
Whitespace, cosmetic changes against alpha/tc/scc.c 1.40.
1998-03-22 07:15:20 +00:00
6e3073d769
More tty dialin/dialout changes (t_wopen).
...
NB: dtop is a keyboard/mouse bus and doesn't support dialout.
1998-03-22 07:04:13 +00:00
9f50fca1fd
Add commented out "options FFS_EI"
1998-03-18 16:34:41 +00:00
e3bda606eb
Add support for UVM.
1998-03-12 05:45:04 +00:00
92abc814ff
Clean this up a bit.
1998-03-06 00:21:40 +00:00
da3c8e52f1
Make this work with DEBUG="-g"
1998-03-03 07:38:40 +00:00
f02b1a7a33
Make this compile again in light of Lite2 merge. (Yuck.)
1998-03-02 23:17:19 +00:00
8d0d59284b
Use allocsys(), mips_init_msgbuf(), and mips_init_proc0(), plus small
...
changes for MACHINE_NEW_NONCONTIG.
1998-02-25 23:31:29 +00:00
d6085102e9
DECstations have one physical memory segment.
1998-02-25 23:31:03 +00:00
7198bb7811
Set the VM page size after clearing the BSS segment.
1998-02-23 20:05:09 +00:00
a3a297cc40
Two purely cosmetic whitespace changes.
1998-02-23 18:45:44 +00:00
f7bd3a0119
Move existing contextsw-avoidance code in rzdump() earlier, since rzready()
...
also calls biowait().
Some drives seek to modepage on every modepage geometry-sense in rzready()
cache dev_t of last readied device in rzdump() to elide rzready() calls.
2x speedup of dumps on rz25 and 20x-30x speedup on some IBM OEM 4gig drives.
1998-02-21 20:20:55 +00:00
17eae81dc5
Use the generic NetBSD/mips crash dump code.
1998-02-19 23:13:33 +00:00
50f58080f4
Rewrite rzdump(); the previous one was completely broken.
1998-02-19 23:04:41 +00:00
258bdac2d5
Include the MFS option header.
1998-02-19 00:32:11 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
68f29b9316
Increase delay between mouse reset/self-test and autoreport commands
...
from DELAY(100) to DELAY(150). The newer accurate DELAY() calibration
left some mice (mostly VSXXX-GA square, not VSXXX-AA hockeypuck)
ignoring the MOUSE_INCREMENTAL command.
The 150ms delay is verified to work on 3100s on both kinds of mice.
1998-02-05 05:19:45 +00:00
580a0a4d12
Add local `extern' declaration of ioasic_cd, as in alpha/tc/scc.c.
...
Missed here after the removal of ioasic_cd decl from ioasicvar.h.
1998-02-05 01:57:35 +00:00
5ca978e981
Use correct name ("ioasic") when checking parent bus.
1998-02-01 02:25:34 +00:00
a34a81d49b
fix change made in rev 1.5: clock was moved to ioasic, but ioasic
...
_requires_ offset locator (which may be wildcarded). No offset locator
was supplied, so kernel configs using this file would fail.
1998-01-27 18:17:39 +00:00
15ae963bea
When dumping, print out the device number as major,minor.
1998-01-24 16:46:23 +00:00
ac937aafed
Fix clock attachment to match (pseudo) ioasic attachment in 5000/200 kernel.
1998-01-21 02:38:26 +00:00
0475e09198
Update for changes to config.
1998-01-12 20:04:24 +00:00
6f57e5c573
multiple include protect machine/limits.h, fixes pr 4473 (from Mika Nystrom)
1998-01-09 22:23:44 +00:00
408be2261c
Compile in BOOTP support for diskless boot.
1998-01-09 17:25:30 +00:00
35718a7622
Use of BOOTP or BOOTPARAM can be conntrolled by config option now.
1998-01-09 17:21:10 +00:00
b46484bb8a
RCSID Police.
1998-01-05 20:51:25 +00:00
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
3550b22654
Commit patch for PMAG-A (mfb) pixel inversion accientally left out of 1.3.
...
See PR# port-pmax/4724.
1997-12-22 02:39:28 +00:00
c87631771e
Add COMPAT_13.
1997-12-01 14:52:51 +00:00
4d03a7d4d0
Fix typo in bus_space_barrier definition. See PR 4488.
1997-11-28 00:33:53 +00:00
1863572e04
Add a check for the DO key to enter ddb on the Personal DECstations.
1997-11-23 18:20:11 +00:00
4f4912d825
If DDB is defined, and RBUF_FERR occurs on a serial console port, enter ddb.
...
Fixes PR 4173.
1997-11-21 17:26:29 +00:00
315f8de9c2
add pseudo-device rnd, commented out
1997-11-20 08:11:14 +00:00
f027428995
Cursor is supposed to be turned on when unblanking the screen.
1997-11-18 20:16:28 +00:00
1c7a3c901e
Apply version of cursor for bt431 cursor chip on mfb:
...
Fix cursor sprite for X11 startup/exit:
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
1997-11-17 11:44:50 +00:00
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
45ad7fb3e5
Fix cursor sprite for X11 startup/exit:
...
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
1997-11-16 10:17:53 +00:00
0c7ac6dc71
Initialize 3100 cursor to off, for rcons text mode.
...
(Minimal-distance fix for 1.3 release).
1997-11-14 02:01:22 +00:00
a5449ca17c
Back out read-side DELAY() in previous revision added on advice of
...
tech-kern. Reported by Sean Davidson to cause erroneous doubling of
keyboard input on a 5000/50 under load.
Increasing the DELAY() from 2 to 30 doesn't help. Remove it for the
1.3 release. May cause problems with low-speed serial input, but
console keyboards work properly.
1997-11-14 01:38:57 +00:00
7984f5ce3a
The scsi command length was not being set in rz_command(), which caused
...
the SII driver to fail when trying to get the drive geometry.
Remove extraneous newline when printing out the disk geometry during device
probes.
1997-11-13 03:56:49 +00:00
ce4c770f88
Make sure CPP, AR, AS, and RANLIB are defined.
1997-11-12 23:11:50 +00:00
a421995756
Define LORDER, NM, and TSORT here, like we do the rest of the tools.
1997-11-12 22:25:31 +00:00
b0367937cb
Fix typo: NRASTERRCONSOLE -> NRASTERCONSOLE
1997-11-10 21:59:18 +00:00
9dee06e184
Add px placebo driver to standard pmax options.
1997-11-10 08:26:33 +00:00
c176a3646e
Fix kernel divide-by-zero errors and other bugs with removable devices:
...
* Add code to query CDs for size, from MI scsi cd.c. Use it on CDs.
* Set C partition size for CDs. 4.4bsd/pmax code only set `a' partition
size and required users to mount `a' partition, breking raw-device
access like "disklabel rz?".
* Avoid possible divide-by-zero call to howmany() from rzstart(),
on removable media that aren't ready at device-open time.
Verified to work on rrz42.
1997-11-09 03:08:23 +00:00
9e1d749da4
Initialize nfs_boot_rfc_951 to 1. Makes pmax kernels to use bootp,
...
not RARP/bootparams, to get diskless-boot config info.
Decstation PROMs already use BOOTP so we lose nothing.
1997-11-09 02:03:50 +00:00
0f41aef4b9
Workaround for port-pmax/4438 (pmax kernel glass-tty console code is broken)
...
until a proper fix is available:
Perpetuate the 4.4bsd design even further. Change keyboard-driver
open routines to check for an active raster console. If active, set the
keyboard struct tty's t_winsize from the rcons t_winsize on first open.
See pr 4438 for remaining problems and discussion of a complete fix.
1997-11-08 21:55:05 +00:00
1dfe80f178
Add MODE SENSE code from MI scsi sd.c to rz.c.
...
* add includes for sys/dev/scsipi headers.
* cut-and-paste mode_sense and disk-geometry sense code from sd.c,
with name changes sd -> rz.
* Write `rz_command()' to send SCSI sense commands based on
existing rz size-sensing code.
* get geometry info with page 4 and page 5 mode sense.
* use resulting geom info for default label, fake label, and when
using ultrix labels. (ultrix labels have no geometry info).
Fixes incrrect-label bugs with using sysinst to install onto
Ultrix-labelled disks.
1997-11-08 11:28:10 +00:00
fbac6ffd1b
Delete ancient warning printf() from when this code hadn't been
...
tested on 3MIN or MAXINE motherboards. Add __KERNEL_RSID while we're here.
1997-11-08 07:15:35 +00:00
2d21148a91
Remove long-unused MD pmax console code.
1997-11-03 00:19:30 +00:00
thorpej