By not doing so, a very obscure bug followed where the config search
stuff stopped at the bridge (pceb) and didn't even call match for the
two Qlogic ISP cards that followed.
version has 2GB direct map starting at 2GB, and either 256MB or 1GB
S/G starting at 1MB. I've done *some* testing on this, but I'm not
quite happy with it yet.
out how much s/g ram is available. Can't really use the 128K entry S/G
ram yet- but I'll fix that later. More importantly, add in a dwlpx_iointr
handler that will try and figure out what the DWLPX error is and at
least print out what is happening- I actually found it useful in S/G
entry debugging as it could tell me that I had some bad S/G entries.
bus_dma's appearance in the tree) to support sram bounce buffers.
When a busified if_de.c appears, this module can join awd.c at the
end of that long walk on a short pier.
a function) which specifies how many lines will be skipped when scrolling
up when the bottom of the screen is reached. Dumb framebuffers skip 10
lines (as before) because the copies are s ... l ... o ... w, but it's
silly to skip 10 lines on VGA, since the copies are much faster, so we
only skip one in that case.
reads. This is necessary because of newer AlphaStation firmware doing
the Wrong Thing with target aborts behind PCI-PCI bridges, much like they
do the Wrong Thing with master aborts. Reported by Matthias Drochner.
PCI master aborts as eb164 firmware, so use the same workaround mechanism
on all system types (clear error register's master abort bit, and check
it after accessing configuration space), not just eb164's.
This also fixes a bug on eb164's - when making the Alpha port compile
again, I made an error that caused this to not be used on eb164 systems,
either. Thanks to Matt Jacob for pointing out this goof.
don't expect/provide pci_decompose_tag to be a MI, public function. It
wasn't intended to be to begin with, and uses of it (e.g. the one in the
'de' driver) are quite likely to be incorrect.
packets. It's not clear whether latency will be affected much. It could be.
However, for the time being, getting full rates out of HIPPI or SCSI are what
interests us at NASA, so we'll hew to this bias.
the PCIA revision, and whether or not the STD I/O EISA bridge is
present. Decode, but don't bother displaying, the power consumption
information for each PCI slot.
compliation without DEBUG and/or DIAGNOSTIC happens without errors.
Note that all such initializations in the Alpha port are marked with "XXX
gcc -Wuninitialized". As far as I'm concerned, the one or two times
-Wuninitialized has saved me from problems are worth the (very minor) cost
involved with the initializations, esp. if it's noted why the
initializations are done. This was prompted by PR#3690, from Ted Lemon.
(1) object code can be shared (where the hardware makes that possible), and
(2) so that the file names better describe the systems which use them. (the
pci_swiz* files are for machines whose PCI interfaces require address
"swizzling." Later, there will be probably be other sets, e.g. pci_bwx*
for machines whose chipsets can easily deal with the Alpha BWX extensions
when doing device accesses.)
arguments, so that a device can tell if its memory and I/O spaces are
enabled. The flags are cleared, depending on the contents of devices CSR
registers, in the machine-independent PCI bus code.
This can be disabled (to save a bit of space) with the NO_KERNEL_RCSIDS
options, which is present but commented out in the ALPHA config file.
In ELF-format kernels, these strings are present in the kernel binary but
are not loaded into memory. (In ECOFF-format kernels, there's no easy way
to keep them from being loaded, so they _are_ loaded into memory.)
extent storage per interface unit (e.g. dwlpx, where there can be multiple
units per machine) to do so. Inspired by discussion with and changes from
Matt Jacob.
the chipset space init functions multiple times, since that would clobber
extent allocations made between the two calls. Also, deal with the
fact that the APECS and LCA no longer shared common chipset functions.
the same things, but the extent maps have to be managed differently,
since the two chipsets provide different memory and I/O region mapping
possibilities.
don't machine check when a PCI Master Abort is signalled. This can
happen, for instance, when configuration space for a device that isn't
present is examined. When this is detected, act like we normally would
when machine checks are posted while examining nonexistant devices.
even if PCI and the IDs are right), just for sanity, before declaring
success. Split the single 0x3b0 -> 0x3df allocation into three seperate
ones: 0x3b0 -> 0x3bc (leaving the 4 ports available for lpt),
0x3c0 -> 0x3cf, and 0x3d0 -> 0x3df. The former chunk has to be split
off if the lpt can exist there, and it's sort-of pretty to have each
group (based on second hex digit) have its own handle.
front-ends. Unfortunately, because of the way ISA and PCI are currently
probed, if you have a PCI VGA board in your machine and both drivers
in your kernel, the ISA VGA driver may accidentally match the PCI board.
For now, the only solution to this is to not put both drivers in
the GENERIC kernels.
the Digital Semiconductor AlphaPC 164 Motherboard Technical Reference
Manual. This may not work, but it's the best i can do with the
documentation I have.
21164 + 21172 box, with Yet Another Way of doing interrupts. The
interrupt mapping and handling code hasn't been written yet, and none
of this code has been tested. (Checkpoint of work in progress.)
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
figure out the correct IRQ for the ethernet on the AlphaStation 500.
That code is enabled via KN20AA_BOGUS_IRQ_FROB (but hopefully won't be
needed any time soon, and won't link w/o slight changes to other code).
Basically, when establishing an interrupt that we don't know what to
do with, prompt the user for what interrupt line to enable. If you
get stray interrupts when you try to use the device (but not before),
then you've got the right line.
found on the AlphaStation 600), and interrupts on interrupt line 13.
Thanks to Andrew Gallatin for booting a test kernel 32 times (trying
each interrupt line, looking for the right one) to find this.
mapping code. (instead of using a "slot" and multiplying by 4 and adding the
pin number later to get the IRQ, just use base IRQ value and add the pin
number.)
mjacob