Added support the new instructions defined in the ARM V4 Architecture
Reference manual (long multiplies, half word load and stores,
half word/byte signed loads).
Added support for the ARM810 IMB architecture defined SWIs.
Fixed bug in calculating some immediate constants.
Added support for the wfs, rfs, wfc, rfc instructions
Added support for the floating point compare instructions
Added ldf, stf, ldc and stc instructions.
Fixed mis-disassembly of some msr/mrs instructions.
The ldm and stm instructions will modify the direction identifier to
use the stack variations if the base register is r13.
variant of the CG4 (the one with the AMD colormap DACs). This has
been tested only on the "Type B" H/W at this point (Brooktree DACs).
Thanks to Ezra Story and Scott Ellis for the "Type A" support.
some guesses for the machines that have two of these buggers (I don't have
such a machine). This driver is a copy of the sparc/alpha esp with a
minimum of changes--after we get it performing a bit more respectably,
we should see about re-normalizing the sources.
- add a missing return; at the end of a case, leading to wrong disassembly
of the next few instructions after fmovem.
- while we're here, correct the same bug in PBcc.
XXX there are a few other dubious fallthroughs in this file (which are
not explicitly marked with /* FALLTHROUGH */), which I didn't yet analyze.
* Fix other FMOVEM interpretation bugs:
- correct printing of FP data register lists if all are used (only FP0
would be mentioned)
- correct printing of FP data register lists in the case the list is reversed
(would have printed nothing)
- correct mapping of fp0-fp7 to register list bits (was reversed)
- correct printing of FP control register lists (this list is never reversed)
- correct printing of FMOVEM with FP control registers (the data direction
was interpreted the wrong way)
* While we're here, enhance the comments in MOVC's list of cpu control
registers
second on Sun4m machines. Although this was in the noise of the unstable
Sun clock crystals before, the discrepancy amounted to about 100 ppm, and
thus made NTP perform poorly. NTP now works happily on my SS20...
struct member cn_nameptr 'const', since they should never be used to
modify the path name. (Only the pathname buffer, cn_pnbuf, should be
modified.) Propagate the const poisoning to code that uses the namei
and componentname structs.
- Sync with hp300 version.
Machdep.c:
- Notify the vm-system that kernel-text is read/execute
- Notify the vm-system that page zero isn't mapped
[ Grrr.. How do you cancel a check-in when you find out too late they
should have different comments ]
not used by anything, for now), and implement MNT_NOCOREDUMP by checking
whether or not MNT_NOCOREDUMP is set on the file system where the dump
would land (i.e. the file system of the process's current working
directory), and disallowing the core dump if it's set.
management by itself. But when it gets a start unit request, it keeps
the floppy motor running all the time. This adds code for dealing with
yet another quirk (SDEV_NOSTARTUNIT) that prevents sd.c from sending
start unit requests. A entry for the Teac FC-1 is added to the quirk
table.
comment to note that this printf still isn't quite right (possibly
because this is now a pseudodevice), and the autoconf printout when
mounting root on a ramdisk isn't right, either. This should both be
fixed.
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
in. Unfortunately, the BPF-only code called a label that wan't also
being #if'ed, and this made the compiler bitch. Now that we compile
with -Werror, this prevented the thing from compiling at all! (sigh)
- Try V3 first for diskless booting. Fall back to V2 if V3 fails.
- optionally (option NFS_BOOT_TCP) try a TCP mount first
for diskless booting. Fall back to UDP if it fails.
- Enable switching between UDP and TCP for remounts.
VM_PROT_READ|VM_PROT_EXECUTE. The previous default (VM_PROT_ALL)
would cause the following scenario:
- someone attempts to write kernel text (my test was writing
to an offset of /dev/kmem which was known to be in the text
segment, while in single-user mode).
- enter trap() with MMU fault (because of RO pte).
- trap() calls vm_fault(), which looks up vm_map_entry for
fauling address.
- vm_fault interprets write fault and VM_PROT_WRITE (in VM_PROT_ALL)
as COW; new page allocated, data copied to new page, new page
mapped in at trunc_page(<faulting va>).
- wow, look at the fireworks!
Fixes two potential symptoms:
- kernacc() returns TRUE when checking for permission to write
an offset in kernel text, which is bogus, since the text has
been mapped RO by pmap_bootstrap().
- Handling of a stray pointer that attempted to scribble into
kernel text would not be executed properly.
don't do this, kernacc() will bogusly return TRUE for page 0, causing a
NULL pointer dereference in uiomove() when reading /dev/kmem.
Thanks to Scott Reynolds for noticing the problem.
Still untested on -1260/-1230, and hangs when enforcing SFAS_NO_DMA on 2060;
but works with DMA on the latter.
Still untested in a NetBSD-12A environment. (Sorry, don't have the hardware
myself.)
Thanks to Laurent Baroukh for being the guinea pig, and to Jerome Lovy
for forwarding the hardware information Phase V gave him, and to Phase
V for providing it.
- Rename EX_NOBLOB to EX_NOCOALESCE; it's much more descriptive of
what's going on.
- Use ALIGN(), rather than our homegrown EXTENT_ALIGN(), when dealing
with map overhead. Privatize the EXTENT_ALIGN() macro; there's no need
to export it.
- Implement EX_BOUNDZERO flag. This changes the boundary line policy in
extent_alloc() and extent_alloc_subregion(); boundary lines are
computed relative to 0, rather then the start of the extent.
- Add a new flag to specify that it's ok to wait for space in the
extent: EX_WAITSPACE.
- Add some whitespace in the function prototypes.
- Rename EX_NOBLOB to EX_NOCOALESCE; it's much more descriptive of
what's going on.
- In extent_free_region_descriptor(), if we're a fixed extent,
freeing a dynamically allocated region descriptor, and someone
is waiting on the freelist, let the waiter have it, rather than
free'ing it back to the system.
- Use ALIGN(), rather than our homegrown EXTENT_ALIGN(), when dealing
with map overhead. Privatize the EXTENT_ALIGN() macro; there's no need
to export it.
- Implement EX_BOUNDZERO flag. This changes the boundary line policy in
extent_alloc() and extent_alloc_subregion(); boundary lines are
computed relative to 0, rather then the start of the extent.
- Fix a nasty race between multiple participants doing region and
descriptor allocation.
- Add a new flag to specify that it's ok to wait for space in the
extent: EX_WAITSPACE.
- Blow away an unnecessary splhigh()/splx().
- Put a bunch of sanity code inside #ifdef DIAGNOSTIC/#endif.
- Fix up usage of MBD_ISPID(). (from Jason Thorpe)
- Be careful not to deref bad pointers in the MMU fault handler. (ditto)
- Ensure trap() never deals with a NULL proc, and if our proc has
no pcb, punt. (Suggested by Gordon Ross)
- Initialize proc0.p_addr just after setting up the kernel stack, to avoid
getting NULL pointers in trap(). Change suggested by Gordon Ross.
- Panic if main() returns.
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess. Marked XXX for future reference.
create an assembly label, and SYSCALLNUM to convert a syscall name into
the macro that's defined to be its number. Add a CALLSYS_NOERROR macro
which invokes the named system call. (CALLSYS_NOERROR is here since
it's used in locore, for sigcode.)
restart if we get multiple status interrupts before the softintr()
routine gets a chance to run. The fix is to determine and accumulate
status line changes at the H/W interrupt level, and then check and zero
the accumulated changes when the softint() finally runs. Many thanks
to Bill Studenmund <wrstuden@loki.stanford.edu> for finding and fixing.
gwr