(_BYTE_ORDER, _BIG_ENDIAN, _LITTLE_ENDIAN).
Define old names from the ANSI ones if not _POSIX_SOURCE.
* Define _QUAD_HIGHWORD and _QUAD_LOWWORD properly when
_BYTE_ORDER == _BIG_ENDIAN.
Only assembly version for i386 bswap16 and bswap32 for now (bswap64 uses
bswap32). Contribution of assembly versions of these are welcome.
Add byte-swapping of ext2fs metadata for big-endian systems.
Tested on i386 and sparc.
* prototype and definition for pmap_activate(p). Updates the segtab,
and changes the active ASID if p == curproc.
* Make reserved fixed-address (UADDR) kernelstack PTEs global,
so we still have a kernel stack after pmap_activate() on curproc.
* make KSEG2 mappings for p_addr global (see above.)
Seems to detune contextswitch and NTP resolution (by 60 ms), but
thepmap_activate() interface is mandatory. Needs more thought.
undone by rev 1.7:
>redo pmax/include/reg.h
>so that the definitions needed by locore.S are in a separate file,
>pmax/include/regnum.h.
* Add explicit `#include <mips/regnum.h>' where symbolic offsets
into a mips trapframe or struct reg are used..
Add DDB interface to /sys/arch/mips/mips..
Rework heuristic stack traceback to work with DDB.
Add hooks to print exception log from DDB.
Add hooks from pmax console drivers: call Debugger()
after break from serial console, or 'DO' key from LK-xxx.
* cpuregs.h:
rename remaining VMMACH_xxx TLB macros to MIPS_TLB_xxx.
Add compile-time MIPS3-only, compile-time MIPS1-only, and
runtime (both) definitions for number of TLB ASIDs (tlb pids)
and shift count to extract a TLB pid.
* locore.h:
Delete unused vector slot for indexed TLB writes.
mips1 and mips3 TLBs are different enough that we have
to break them out at the caller anyway.
* Add compile-time MIPS3-only andcompile-time MIPS1-only
macros to call locore functions directly by name.
Use the existing method table only if
* mips/mips_machdep.c, mips/trap.c, mips/pmap.c, pmax/machdep.c:
Use MIPS3_ or MIPS1_ specific names for TLB pids in
mips3 and mips1 specific code paths (e.g., creating the kernel stack
for process 0).
Add `options MIPS3' to pmax/conf/GENERIC.
* cpuregs.h:
Delete unused VMMACH_ names (e.g., duplicates of PTE bits in pte.h).
Change remaining VMMACH_xxx names to MIPS1_xxx or MIPS3_xx.
Fold remaining compile-time definitions into a single #ifdef MIPS3.
* Use MIPS1_ names in locore_r2000.S, mips3_ names in locore_r4000.S
* Garbage-collect MachHitFlushDCache()
* psl.h:
use MIPS1_, MIPS3_ symbolic names for Cause register bits.
change _R3K to MIPS1_, _R4K to MIPS3. Conditionalize for mips1 only,
mips3 only, or when both are defined, use runtime CPUISMIPS3 test.
Remove cpu-specific routines from locore.S and add them to locore_r2000.S
and locore_r4000.S. Add entries in locore jump vector table for switch_exit()
and the cpu_switch() context resume.
Add offsets into the jump vector to genassym.cf for use in locore.S.
similar design and code by Jason Thorpe and Jonathan Stone.
NOTE: the kernel-stack-switching code and cacheflush() calls in
locore.S still use #ifdef MIPS3 and need more work.
mips/include/cpu.h:
Add CPUISMIPS3 for run-time tests of what CPU architecture level
we're running on.
mips/include/locore.h:
Add declarations of locore cache-size variables for ref/def toolchain.
mips/include/mips1_pte.h:
mips1 TLB bit definitions.
mips/include/mips3_pte.h:
mips3 TLB bit definitions.
mips/include/pte.h:
define accesor macros for TLB bits (e.g., mips_pg_m_bit(),
that expand to CPU constants if only one CPU arch is configured,
or to inline functions if both MIPS1 and MIPS3 are configured.
mips/mips/locore_r2000.S:
Use MIPS1_PG_xxx constants inside mips1-specific code.
mips/mips/locore_r4000.S:
Use MIPS3_PG_xxx constants inside mips3-specific code.
mips/mips/locore.S:
Use MIPS1_PG_xxx constants inside mips3-specific code.
Use MIPS1_PG_xxx constants inside mips1-specific code.
(Needs more work!)
mips/mips/{pmap.c,vm_machdep.c,trap.c}, pmax/pmax/machdep.c:
Use MIPS3_PG_xxx constants inside mips3-specific functions,
and MIPS1_PG_XXX inside mips1-specific code.
Otherwise, use mips_pg_XXX_bit() macros where they apply,
and use "if (CPUISMIPS3) { ... } else {... }" where they don't.
mips/mips/mips_machdep.c:
Import Michael Hitch's fixes from the pmax locore-init code
into mips_vector_init().
pmax/pmax/machdep.c:
Use generic mips_vector_init() locore vector-init function.
Move mips-specific pmap definitions (PMAP_PREFER for mips3, declaratin
of pmap_bootstrap() for the system-specific machdep.c) from
arch/pmax/include/pmap.h to arch/mips/include/pmap.h.
* Move declaration of locore communcation variables (CPU family,
cache sizes, etc) to mips/include/locore.h. Delete from
pmax/include/cpu.h and older versions from pica/include/cpu.h.
* Move definitions of CLKF_BASEPRI, CLKF_USERMODE to mips/include/cpu.
* Delete duplicate definitions in pica/include/cpu.h, pmax/include/cpu.h.
Change pmax/include/psl.h to just do #include <mips/psl.h>.
pmax/include/psl.h would go away completely if it wasn't stil required
by compat/common/kern_exit_43.c.
Fixes profiling for non-underscore-prepending toolchains
(elf, e.g., shared libs), and breaks a.out/ecoff toolchains.
May break mips kernel profiling too. Needs more thought, since the
original intent of __mcount vs ___mcount on mips date back to pre-1.0 days.
* handle interpreters with nonzero virtual address of entry-point:
subtract p_vaddr from computed entrypoint, as the mips elf exec did.
* Add #ifdef ELF_INTERP_NON_RELOCATABLE/#endif around the code
that tries to choose a `good' address at which to load an interpreter,
if none was set by the emul probe function.
(the address chosen could be improved to avoid fragmenting the
process virtual address space).
* define ELF_INTERP_NON_RELOCATABLE in machine/elf_machdep.h for mips CPUs,
which currently use a GNU-derived ld.so.
ELF_INTERP_NON_RELOCATABLE is not necessary for native NetBSD/alpha ELF
binaries. It may be required for GNU-derived ELF dynamic loaders (Linux/i386?)
mips_r2000_, mips_R2000_ -> mips1_
mips_r4000_, mips_R4000_ -> mips3_
(which are also, for mnemonic reasons, consistent with gcc flag usage,
rather than using mipsI_ and mipsIII_).
* Move mips-I pte (TLBlo) definitions from pmax/include/pte.h
to mips/include/mips1_pte.h
* Move mips-III pte (TLBlo) definitions from pica/include/pte.h
to mips/include/mips3_pte.h
* Add new mips/include/pte.h, which includes exactly one of
mips1_pte.h or mips3_pte.h (which still have namespace collisions),
depending on "options MIPS1" or "options MIPS3". (hack).
Move soft kvtopte(), ptetovk() definitions to mips/include/pte.h
* Add macro PTE_TO_PADDR() to hide the different hardware TLB formats
when mapping from pte to physical address.
* Add macro PTE_READONLY() to hide lack of SW read-only bit in mips-III
tlb. (mips1 pmap uses a sw bit in the PTE, mips3 looks up RO bit in
the kernel pmap.)
* Use macros (not direct TLB frobbing) in mips/trap.c, to make it
mips-1/mips-III indepenndet.
* Change {pmax,pica}/include/pte.h to just do #include <mips/pte.h>.
consistency with the way machdep headers for other things are done.
(the creation of the ecoff_machdep.h files was done on the CVS server, to
keep the RCS logs intact.)
macros to use to remove #ifdefs from the machine ID case check.
Eventually, these headers will contain other information, e.g.
machine-dependent relocation information, etc.
definitions.
* Include <mips/cpuregs.h> in <cpu.h> so kern_clock.c has user/kernel
status bits in scope. Still needs work; r2k/r4k previous-mode bits
are different.
* Include <mips/mips_param.h> in pica/include/param.h, for locore declarations,
and definitions of vm and other constants that should be shared across
NetBSD/mips systems to esnsure user-level binary compatibility.
to the mips tree.
* Add declarations of functions used by vm_machdep.c.
* Add declarations of functions printed by name in stack tracebacks.
* Add declarations of functions used by the model-independnet mips machdep.c
code.
an vector (struct) of function pointers. Add prototype declarations for
each vector entry.
Add declarations for the r2000 (MIPS-I) and r4000 (MIPS-III) locore
versions of the relevant functions.
Replace impliclty-sized types (u_long, u_short) used in
declarations of byteorder functions witho explicitly sized types
(u_int32_t, u_int16_t).
Avoids problems with using ntohl(foo) as (eg) an argument to printf().
Do not define __BDEVSW_DUMP_OLD_TYPE, as it breaks prototyping
of device dump functions, and should be port-dependent in any case.
The pmax 4.4bsd/pmax-derived drivers are being fixed, and the pica port
uses the MI scsi drivers already.
* add "MIPS_3k_" for the MIPS-I r[23]000-specific register definitions.
* add "MIPS_4k_" for the MIPS-II/III r4000-specific register definitions.
* add #defines that provide the old values for locore and user
code, so the existing code continues to compile.
Regression-tested against the old headers by grepping for #define's,
editing out the defined symbols, and preprocessing with both the previous
machConst.h headers and this version.
Some unused symbols (CPU and FPU must-be-zero constants) are no longer defined.
Pica interrupt masks are now constant expressions instead of constant
values.
TODO:
* factor out the common #defines into src/sys/arch/mips.
* Get rid of the Sprite coding-style names (MACH_xxx).
* Separate out the r3k/r4k differences from the Pica/pmax differences.
* Figure out how to have a run-time choice of r3k vs. r4k support,
instead of a compile-time choice.
Update the include-idempotency preprocessor token to match.
References to machAsmDefs in vendor (sprite, 4.4bsd) headers left unchanged,
for historical accuracy.
provide r3k and r4k versions of each, and move to sys/arch/mips/include.
Note in comments where each mips-based port should provide
definitions in its own cpu.h after including this file.
opcodes from the Pica port. Per Fogelstrom claims the latter are all
supposedly MIPS-II (r6000) instructions, rather than MIPS-III (R4000),
but we haven't checked to be sure. Are LL/SC really in MIPS-II?
CVS:: ----------------------------------------------------------------------
versions work correctly; at some point between then and the immediately
preceding revisions, the "stylistic" changes to one (or both) stdarg.h
and varargs.h broke passing doubles to printf().
* define PT_GETREGS and PT_SETREGS in pmax/include/ptrace.h
* Flesh out the stubs in pmax/pmax/process_machdep.c to handle
those requests.
* Now that "struct reg" is actually used, remove the bogus
#ifdef LANGUAGE_C around its definition, and redo pmax/include/reg.h
so that the definitions needed by locore.S are in a separate file,
pmax/include/regnum.h.
* update locore.S to match.
consistent with the (default) prepending of underscores to identifiers.
Because this reference is inside an ASM string it's too hairy to
conditionalize to support different toolchains that don't prepend underscores.
(Just don't do profiling with such toolchains.)
such as __warn_references() and __weak_reference() which are actually
machine dependant. This will make it easier for ports that are being
bootstraped with ELF and ECOFF based toolchains.
This change also introduces a new macro, _C_LABEL(x). _C_LABEL expands
its argument, an identifier, to a character string of the identifier
name as it is represented in an object file.
For most ports, _C_LABEL(x) will expand to "_x", for ELF based ports
_C_LABEL(x) will expand to "x".
