0e3a0a7f80
Once a fragmented IP packet has been reassembled, recompute the packet
...
length before passing it up the stack. From FreeBSD.
1998-11-13 03:24:22 +00:00
7b16048c5a
Fix the Right-Shift on the LK501 keyboard in a different way. My previous
...
attempt results in the up and down arrows not repeating in the X server.
The keyboard division table is modified to place the Right-Shift keycode
into division 6 along with the Left-Shift and Control. A corresponding
change to the X server lk201 keyboard handler is also required.
1998-11-13 01:59:51 +00:00
de234f5dda
Pseudo-device definition and files for RAIDframe, CMU PDL's RAID 0, 1, 4, 5,
...
6 implementation + simulator.
From Greg Oster <oster@netbsd.org>.
1998-11-13 01:16:19 +00:00
17bfc42d6d
Add DTYPE_RAID.
1998-11-13 01:05:51 +00:00
d272bb0024
Handle the case where ccdbuffer() fails due to memory shortage. Build
...
a fifo of component buffers, and free them if ccdbuffer() fails. Once
all component buffers are build, run through the fifo and fire off the
requests to the components.
1998-11-13 01:00:15 +00:00
092c201932
Simplify calling of ccdbuffer() now that the mirroring code is nuked.
1998-11-13 00:35:57 +00:00
ab27c3f89c
Return EINVAL if invalid flags are passed.
1998-11-13 00:31:02 +00:00
00172c10d5
Nuke the mirroring code. RAIDframe is about to go in, and is a much
...
better mirroring solution.
The ccd driver will stay, even in the presence of RAIDframe, for applications
where just RAID-0 is needed (much smaller code footprint).
1998-11-13 00:26:19 +00:00
b6ac7c9b6b
Must use PR_NOWAIT when allocating component buffers.
1998-11-12 22:39:57 +00:00
fb1a849339
Use different names for the "nfscon" label to tsleep(), so that it can
...
be seen in which one a process is sleeping.
1998-11-12 22:31:02 +00:00
b148b1ea84
Oops, I didn't mean to let that last commit get out. Though
...
maybe Havard should look at the changes (to make INSTALL smaller)
and see if any are general/reasonable for everyone.
1998-11-12 21:51:02 +00:00
05c4e40b41
defopt the APM options.
1998-11-12 21:32:16 +00:00
7f2a4a5331
Perry said I should ... enable pms0 for GENERIC
1998-11-12 21:12:34 +00:00
1fcae7f1be
defopt FFS_EI
1998-11-12 19:51:10 +00:00
e78e086623
change the id arg of ftok from char to int.
1998-11-12 16:15:45 +00:00
551ff5c2a0
use one define per static array instead of defining all three with DKTYPENAMES
1998-11-12 15:52:21 +00:00
56107b8e10
Force PCI_COMMAND_MASTER_ENABLE if DMA has been setup properly. The BIOS is
...
supposed to do it but who knows ...
1998-11-12 15:05:29 +00:00
a16b0cc7db
regen
1998-11-12 14:09:20 +00:00
0c0b302fba
-add an NE2000 clone, info from PR kern/6430
...
-add comment for PCNET/isapnp (ID is vendor specific)
1998-11-12 14:06:34 +00:00
99d394c267
Typo
1998-11-12 14:00:06 +00:00
8146c925da
If we get a TX interrupt with no packets buffered, ignore it. This can occur
...
if the chip is reset while transmitting.
XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted. All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
1998-11-12 13:18:26 +00:00
b8974fbf40
Fix yet another bogon in the multicast filter calculation.
1998-11-12 13:03:51 +00:00
b29c33e2a0
Update for the new state of the world: pciide, wscons, and a slight
...
change in how PCI-Host bridges are matched.
1998-11-12 01:04:06 +00:00
76a221aca5
Sync with "GENERIC".
1998-11-12 00:57:29 +00:00
ad77ef01b4
Add kern/kern_kthread.c
1998-11-11 22:46:32 +00:00
920a1ace5b
fork_kthread() -> kthread_create(). Set P_NOCLDWAIT on kernel threads,
...
which will cause any of their children to be reparented to init(8) (which
is already prepared to wait out orphaned processes).
1998-11-11 22:45:32 +00:00
a0fac8a7bc
Move fork_kthread() to a new file, kern_kthread.c, and rename it to
...
kthread_create(). Implement kthread_exit() (causes a thrad to exit).
Set P_NOCLDWAIT on kernel threads, which will cause any of their children
to be reparented to init(8) (which is already prepared to wait out orphaned
processes).
1998-11-11 22:44:24 +00:00
04dc9a8878
Remove some code accidentally readded when Christos implement P_NOCLDWAIT.
1998-11-11 22:37:13 +00:00
17509cc037
Add the Ariadne II.
1998-11-11 22:28:32 +00:00
1449b87b11
New driver for the Ariadne II.
1998-11-11 22:26:27 +00:00
6b1ed04840
Correct the calls (use AllocVec() and FreeVec()),
...
in case somebody ever needs free().
1998-11-11 21:43:18 +00:00
c0782a3653
more printf cleanups
1998-11-11 21:40:38 +00:00
f02a3ccb3e
Switch off the cache later.
...
Apparently, this avoids a problem on DraCos with HyperCom boards.
1998-11-11 20:57:33 +00:00
1e71e76d6c
- clearify the boot messages (features supported vs features used). Thanks to
...
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
1998-11-11 19:38:27 +00:00
b951d6c0cd
Lookup now passes up an extra flag. But old veni will
...
be ok; new veni will check /dev/cfs0 to make sure that a new
kernel is running.
Also, a bug in vc_nb_close iff CODA_SIGNAL's were seen has been
fixed.
1998-11-11 19:22:08 +00:00
18f9174133
Some BIOSs insist on patching the Bios Parameter Block for some drives
...
(e.g. LS-120). Make room for this.
1998-11-11 16:46:38 +00:00
3e6d4553d9
Make DHCP/BOOTP the default for VAX net booting
1998-11-11 15:49:02 +00:00
cabecee13c
Changes to support fork_kthread():
...
- cpu_set_kpc() now takes void *arg third argument, passed to the
entry point.
- cpu_fork() allows parent to be non-curproc iff parent is proc0.
When forking non-curproc, assume its state has already been saved.
- Adjust various pieces of machine-dependent code to account of all of this.
1998-11-11 06:43:49 +00:00
49c62c4336
Changes to support fork_kthread():
...
- cpu_set_kpc() now takes void *arg third argument, passed to the
entry point.
- cpu_fork() allows parent to be non-curproc iff parent is proc0.
When forking non-curproc, assume its state has already been saved.
- Adjust various pieces of machine-dependent code to account of all of this.
1998-11-11 06:41:23 +00:00
6956a57584
Initial version of API for creating kernel threads (likely to change somewhat
...
in the future):
- New function, fork_kthread(), takes entry point, argument for entry point,
and comment for new proc. May be called by any context, will fork the
thread from proc0 (requires slight changes to cpu_fork()).
- cpu_set_kpc() now takes a third argument, a void *arg to pass to the
thread entry point. Thread entry point now takes void * instead of
struct proc *.
- Create the pagedaemon and reaper kernel threads using fork_kthread().
1998-11-11 06:34:43 +00:00
8ed3c420dc
- Withdraw a duplicated file. This has never been a part of distribution.
1998-11-11 05:00:42 +00:00
f66c79c11e
Turn off debugging.
1998-11-11 02:04:23 +00:00
bef3f7ec18
FCode bootblock and friends.
1998-11-11 01:57:32 +00:00
277322402c
Sync'ed more files and routines with mvme port in prepartion for UVM.
...
Now use generic m68k cachops everywhere rather than defining them in locore.s
1998-11-10 22:45:44 +00:00
5f9fa9aaaa
Add and enable the pciide driver.
1998-11-10 14:09:15 +00:00
610fe40379
Only allow access to physical RAM.
1998-11-10 07:29:59 +00:00
1a5d2ce537
File is obsolete.
1998-11-10 05:56:31 +00:00
85d4fddd28
Use the footbridge pci bus space tags when attaching a vga console so
...
that the wscons code will recognise them later and correctly setup
cn_tab when the wsdisplay device is attached.
1998-11-10 04:34:05 +00:00
c082b04018
Implement a separate function to set up the pci io and mem bus space
...
tags.
1998-11-10 04:32:03 +00:00
e695fe5347
Implement bus_space_copy_region_2() for footbridge tags.
1998-11-10 04:29:21 +00:00
1b8620b9fb
Cleanup media set on Alpha. ring txpoll after setting proper tx
...
interrupt mask.
1998-11-09 23:41:14 +00:00
a1b2be7e1d
Const poisoning.
1998-11-09 23:12:48 +00:00
9f20ff377a
Make the device lookup table-driven, like if_ep_pci.c.
1998-11-09 23:12:18 +00:00
e7f0c5989f
Change the way unmounting happens to guarantee that the
...
client programs are allowed to finish up (coda_call is
forced to complete) and release their locks. Thus there
is a reasonable chance that the vflush implicit in the
unmount will not get hung on held locks.
1998-11-09 16:36:16 +00:00
a894e3a493
Add braces to make egcs happy.
1998-11-09 15:53:51 +00:00
b6576d4d72
fix typo: nativ_to_hpux_errno -> native_to_hpux_errno.
1998-11-09 15:35:16 +00:00
4aeff0488e
Need <sys/featuretest.h> for previous commit's use of _POSIX_C_SOURCE to work
...
as expected.
1998-11-09 13:00:41 +00:00
432a301fc6
Support for the CMD PCI064{3,6}. Tested on a 0646 with a
...
"wd0: PIO mode 4, DMA mode 2, UDMA mode 2" device.
1998-11-09 09:21:09 +00:00
21e1b057bc
Sorry, I forgot to revert "#if 0".
1998-11-09 07:01:47 +00:00
9e2545068d
compat_ultrix wants MSG_COMPAT/COMPAT_OLDSOCK: don't depend on COMPAT_43
1998-11-09 04:01:55 +00:00
9d716ec821
- Fix many errors in cursor image manipulation. Hardware expect 2
...
bit/pixel format, not planer format. Assign MSB for cursor mask and
LSB for cursor image, where 10 means mask color and 11 for image color.
Image bit order of Bt431 and Bt459 are opposite to MIPS/Alpha processors
while IMS G332 and DC503 (PCC) are indentical.
- Assume that cursor images are 32 pixel padded as ULTRIX/DU ws interface
do. It's natural to X server.
- XXX Vast majority of codes are duplicated between mfb<->tfb and cfb<->sfb.
Code sharing might be achieved in the context of TGA/SFB+ merge.
1998-11-09 03:58:05 +00:00
d4026f6eb5
GC the B_CACHE bit.
1998-11-09 01:18:34 +00:00
2749e8b74a
We don't need the pci headers here.
1998-11-08 22:02:25 +00:00
9916260262
- declare method arrays in bus.h
...
- add interleaved_wordaccess method array
1998-11-08 21:09:27 +00:00
967a4693f2
Set the B_NOCACHE bit so that NFSv3 will not try to do async writes.
1998-11-08 19:45:17 +00:00
7c037b7009
Clear B_NOCACHE when we're done with the buffer -- although this is probably
...
pointless.
1998-11-08 19:41:49 +00:00
6422baa1c0
Set the B_NOCACHE bit so that NFSv3 will not try to do async writes.
1998-11-08 19:37:12 +00:00
36918f312f
Rework cluster_rbuild() to use buffers with the file system block size.
...
From Alasdair Baird.
1998-11-08 18:18:31 +00:00
6957bd875c
Do not permit the u area for nfsd or nfsiod to be swapped out.
1998-11-08 15:57:44 +00:00
d878e9efc8
Rely on priority match to resolve conflict with the ex driver, not on
...
a define.
1998-11-07 23:06:26 +00:00
ba74edf69b
Fix typo.
1998-11-07 22:50:25 +00:00
fd3b226223
We didn't really implement bus_space_{read,write}_stream_N, but
...
bus_space_{read,write}_region_stream_N. Correct the names.
1998-11-07 22:44:36 +00:00
f040374f11
Support for KA820 console RX50. From 4.4, ported to NetBSD by Sergey Svishchev.
1998-11-07 20:58:09 +00:00
1f23f4e047
add poll entry for (optional add-on) i4b raw device
1998-11-07 17:28:57 +00:00
b6158fa5e3
EGCS fixes. Implement htons as a C macro instead of asm; generates as
...
good code as the asm implementation _and_ can be optimized.
1998-11-07 17:22:58 +00:00
f213d2f96a
use common code for extended capability (power management)
...
let "match" return 2 (> ep_pci)
1998-11-07 16:53:19 +00:00
bbe9d71415
add support for "extended capabilities" (new in PCI spec 2.2)
1998-11-07 16:47:22 +00:00
7c0d69c3ab
minor KNF nits
1998-11-07 05:50:19 +00:00
cdd3abe7a9
Pull MBR-scanning code and NetbSD-partition-finding into a separate
...
function, rathe than duplicating in readdisklabel() and writedisklabel().
XXX should really make MBR code MI, and share with other MBR-using ports
(e.g., arc, arm32 MBR label-scanning code).
1998-11-07 04:39:03 +00:00
a581370fce
apply previous change to writedisklabel() as well as readdisklabel().
1998-11-07 01:30:57 +00:00
45aa097296
Change COMPAT_386BSD_MBRPART: don't break on match, so that if there's more
...
than one DOSTYP_386BSD partition, we pick the last one, not the first.
That's what our install tools do/did with multiple ID-165 partitions.
1998-11-07 01:08:00 +00:00
515148e0a3
cast arg to dbtob to u_quad_t; consisent, and fixed size unnecessary
1998-11-06 23:03:06 +00:00
af24dfc946
argument to dbtob needs to be cast to u_quad_t here to avoid shift lossage
1998-11-06 23:02:12 +00:00
63b722221a
Sync with "GENERIC".
1998-11-06 20:29:52 +00:00
23c04fa375
Add color debug code for DraCos.
1998-11-06 20:08:20 +00:00
010e90e0ca
Cursor position offsets need different values for an sfb board with an
...
alternate clock that does lower resolution.
1998-11-06 03:53:40 +00:00
a7f70a5fbc
Fix problem when using non-DEC CDROMS with blocksize other than 512 bytes.
...
This got lost when disk geometry processing was updated.
Also move the CDROM check from rzread() to rzwrite() - it doesn't make
much sense to report a read-only filesystem error when trying to read a
CDROM.
1998-11-06 01:59:25 +00:00
fb020850a0
Increase compiled-in default bpf buffer size from 4096 to 8192.
...
(the libpcap API provides no way to resize the inkernel buffe,r and
4096 is too small to capture maximum-sized FDDI frames.)
1998-11-05 22:50:15 +00:00
e58cf6b359
Add definitions for the ATA power management commands
1998-11-05 22:49:09 +00:00
bda913305b
Make sure the interpreter string is long enough to check against.
1998-11-05 22:19:25 +00:00
fbed93d50d
EGCS fixes.
1998-11-05 19:48:04 +00:00
bee167375f
EGCS fixes + TU81 fix.
1998-11-05 19:47:20 +00:00
3467859667
EGCS fixes.
1998-11-05 19:46:18 +00:00
3cc58a69cc
Fix a signed/unsigned thinko (this is cgd's fix)
1998-11-05 15:59:00 +00:00
b1122614c3
Add braces to make egcs happy.
1998-11-05 14:13:59 +00:00
03c64513e6
hpux_error.c got removed, add hpux_errno.c instead.
1998-11-05 12:42:46 +00:00
1bf603b543
Sync to mac68k.
1998-11-05 11:46:07 +00:00
37bbf03777
fix pcic_chip_socket_enable() to works on more machines.
1998-11-05 07:55:48 +00:00
2b695df1dc
Common code for media-from-bmcr.
1998-11-05 04:08:01 +00:00
aabf2a0809
In the status routine, always use the media selected in the BMCR if
...
autonegotiation is not enabled. This is more reliable on many PHYs,
and requires fewer register reads.
1998-11-05 04:01:32 +00:00
c755434d9d
Regen.
1998-11-05 03:43:57 +00:00
84def70194
Add AMD's OUI, and the model number for the AMD 79C873 10/100 Ethernet PHY.
1998-11-05 03:43:43 +00:00
a6f004d383
Corrected incorrect definition of child_return(). It only accepts one
...
argument.
1998-11-05 03:40:57 +00:00
74b81e824e
Add "ukphy".
1998-11-05 00:38:10 +00:00
567710942c
Add a driver for "generic unknown PHYs", meant as a catch-all for
...
PHYs we don't have specific drivers for. While this will not give
optimum operation, it will allow network interface drivers to at least
function while drivers for their specific PHYs are written.
1998-11-05 00:36:48 +00:00
7d76571fd1
Tidy up the message from mii_print() somewhat.
1998-11-05 00:30:44 +00:00
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
8634976fb2
Move conversion of PRAM-time to UNIX-time to clock.c (like mac68k).
1998-11-04 15:06:13 +00:00
28411139b3
be consistent with locking of amaps and anons when freeing them.
1998-11-04 07:07:22 +00:00
e4c4ea06b4
remove outdated comment.
1998-11-04 07:06:05 +00:00
2d3363a6d0
regen.
1998-11-04 06:41:57 +00:00
b0e0dc2101
(manufacturer, product) = (0x149, 0x265) is used both
...
"Linksys EthernetCard" and some new versions of "D-Link DE-650".
Changed the product string as such.
1998-11-04 06:40:54 +00:00
5bf12ef4b9
Allow newer versions of D-Link DE650 cards (the manufacturer and
...
the product are valid and the same as Linksys EthernetCard's) work
with the current ne driver.
Somewhat kludgy.
1998-11-04 06:37:09 +00:00
23ed4b5656
we must unlock a vp's object's lock before calling vrele().
1998-11-04 06:21:40 +00:00
61458d7dfa
LOCKDEBUG enhancements for non-MP:
...
keep a list of locked locks.
use this to print where the lock was locked
when we either go to sleep with a lock held
or try to free a locked lock.
1998-11-04 06:19:55 +00:00
42921bd66d
Add the ex driver.
1998-11-04 00:40:03 +00:00
21ab4a980a
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards.
1998-11-04 00:31:59 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
28221c24db
Add info for ex driver.
1998-11-04 00:28:05 +00:00
6768f892cc
Add sqphy.
1998-11-03 23:52:50 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
46f5a5f507
Make "src/sys/arch/i386/stand" compile again.
1998-11-03 22:00:37 +00:00
873f0be1cd
Sync with files in "src/lib/libz".
1998-11-03 15:49:39 +00:00
4401599ff3
These should have been added together with leo.c a long while ago :-( Thanks
...
to 'entropy' for keeping an eye on me...
1998-11-03 14:50:15 +00:00
0b3665db48
Add "Paddington" ID.
1998-11-03 12:15:57 +00:00
44dfb8ea2c
Define the size of the members of utsname in terms of _SYS_NMLN, and
...
define SYS_NMLN if not POSIX or XOPEN source.
1998-11-03 10:08:32 +00:00
7fe67ebc21
Add support for the Seeq 80c24 AutoDUPLEX media interface which was nuked
...
when this driver was changed to use the MAC-independent MII code. This
"PHY" does not have a programming interface, but simply senses the duplex
mode from the link partner. Since it is not possible to read the 80c24
to determine the link type or status, we consider this to be "manual".
1998-11-03 05:47:38 +00:00
cbcaaa3bc3
Make sure that a delay loop actually has some delay in it, and use IFF_OACTIVE
...
as appropriate.
1998-11-03 05:04:49 +00:00
49d750db09
Regen.
1998-11-03 05:02:25 +00:00
8adfcb5246
Define the model ID of the Seeq 84220 10/100 PHY.
1998-11-03 05:01:49 +00:00
19fd5d178f
3Com PHY can't be isolated, so don't allow IFM_NONE.
1998-11-03 00:18:18 +00:00
ec38cdc6d9
Add icsphy*.
1998-11-03 00:12:45 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
1f074c785d
When doing a media change service request, use the media word from the
...
current ifmedia_entry, not from the user-supplied media word. The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.
Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
1998-11-02 22:31:36 +00:00
be4ce8c3f4
Add "10baseT-FDX" and "100baseTX-FDX" aliases to the end of the subtype
...
table. These are actually subtype+option combos, but these are the
strings displayed by the MII code to indicate 10Mbps full-duplex and
100Mbps full-duplex respectively, and it's Nice that ifconfig(8) can
grok them.
1998-11-02 22:10:26 +00:00
67f74ebee4
Implement the new BUFCACHE option.
1998-11-02 07:43:37 +00:00
cee6f4a531
Implement the new BUFCACHE option.
1998-11-02 04:43:23 +00:00
d9b5b0b01a
Sync with files in "src/lib/libz".
1998-11-01 21:28:51 +00:00
e45fa5e3bb
add version for libkeycap
1998-11-01 17:14:27 +00:00
eccf9ccdd8
s|share/misc|share/pcvt|
1998-11-01 16:37:06 +00:00
d04b2d9043
implement BUFCACHE, which sets the size of the buffer cache to BUFCACHE %
...
of physmem. if not set (or == 0), falls back to old sizing method.
1998-11-01 09:51:09 +00:00
1cfb41e0d6
make this compile again (missing semi-colon)
1998-11-01 01:04:48 +00:00
3bcd2ef84d
fix botched printout format
1998-11-01 00:03:08 +00:00
82b48f66b6
If NSIO not defined, compile errors.
1998-10-31 23:51:05 +00:00
e4d73206ab
Make the exec header an automatic variable, instead of malloc()ed space.
...
Saves 60 bytes of code.
1998-10-31 22:40:27 +00:00
d08eb2a32b
Add code to detect a RealTek 8019 chip, and use the media selection
...
support if present.
1998-10-31 01:44:16 +00:00
32a315ff7c
Use the so_send and so_receive funcptrs in the socket instead of calling
...
sosend/soreceive directly. [I've been meaning to commit these for months.]
1998-10-31 01:18:41 +00:00
7d4ee06d3e
Use the rtl80x9 common code for media selection.
1998-10-31 00:45:48 +00:00
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
266aaad811
Define the "rtl80x9" attribute, to pull in code common to RealTek 8019
...
and 8029 NE2000-compatible Ethernet chips.
1998-10-31 00:43:19 +00:00
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
de14bf4f80
Manuel confirms that defaulting to AUTO is ok, to Do It.
1998-10-30 23:30:16 +00:00
2e00799098
Conditionalize include of <lib/libkern/libkern.h> with _STANDALONE (like
...
libsa/nfs.c does). Fixes VAX libsa build problem.
1998-10-30 16:56:30 +00:00
80e1cdcee7
s/milieconds/milliseconds/
1998-10-30 13:47:02 +00:00
2791cf041a
Fix a thinko which still prevented this to run on non-int13-ext machines.
...
Thanks to entropy@zippy.bernstein.com for pointing this out and testing the fix.
1998-10-30 12:16:59 +00:00
9d3eea92f4
Add DOS partition handling, from Ken Nakata in PR 4999, with
...
only slight tweaking by me.
XXX - does not currently handle NetBSD/i386 or 386BSD/FreeBSD partitions.
1998-10-30 06:48:51 +00:00
c8546bdb7b
Enforce a lower bound of (RAW_PART + 1) on the number of partitions
...
read from the Mac partition table. From Ken Nakata in PR 4999.
1998-10-30 05:27:15 +00:00
ed473183ef
Define the FORMAT UNIT command, and several related structures.
1998-10-30 02:07:15 +00:00
6020153959
- Assign copyright terms.
1998-10-30 00:53:12 +00:00
074bc27605
- Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
...
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
7cc47ae9b9
Pay attention to the share_size field in the filecore boot block in
...
filecore_map(). From Andrew McMurry.
Closes PR 6343
1998-10-29 23:18:57 +00:00
ba531b48c6
Use console_debugger() hook to enter DDB.
1998-10-29 21:25:17 +00:00
3ac3cbcfb8
Add options DDB_FROMCONSOLE and sysctl ddb.fromconsole, analagous to
...
DDB_ONPANIC. Lets user ignore breaks but enter DDB on panic. Intended
for machines where debug on panic is useful, but DDB entry is not,
(public-access console, or terminal-servers which send spurious breaks)
Add new ddb hook, console_debugger(), which decides whether or not to
ignore console ddb requests. Console drivers should be updated to call
console_debugger(), not Debugger(), in response to serial-console
break or ddb keyboard sequence.
1998-10-29 21:22:32 +00:00
e29350c92c
- Introduce MI NWSCONS drivers for TURBOchannel framebuffer option cards.
...
N.B., Digital UNIX never supports neither PMAG-AA (mfb) nor PMAG-BA (cfb)
for TC Alphas. PMAG-DV (xcfb) is Personal DECstation built in. All should
be good for console, but need much works for cursor/colormap completeness.
1998-10-29 12:24:24 +00:00
9ddbeaedbb
- match if the function just probing is disk and its interface is ATA.
...
- use product table only for the card which requires quirks or doesn't
have disk device interface tuple.
1998-10-29 09:49:51 +00:00
3f3c763b1b
Define some constants for function extension tuple of disk function.
1998-10-29 09:45:52 +00:00
634f1b5bf7
fix typo and some indentation.
1998-10-29 09:42:45 +00:00
5211fed3ab
Michael Hitch's fix to dtop handler:
...
make handler FSM robust enough to not lose its place after data overrun.
stops keyboard from going catatonic.
1998-10-29 04:54:20 +00:00
d103f66935
Switch the Amiga port to UVM.
1998-10-28 22:41:24 +00:00
27e57114e1
Add support for macppc
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 21:06:27 +00:00
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
626749ed68
Venus must be passed O_CREAT flag on VOP_OPEN iff this is
...
a creat so that we can will allow a mode 444 file to be
written into. Sync with the latest coda.h and deal with
collateral damage.
1998-10-28 19:54:47 +00:00
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
bc70dd6bc5
Cleanup includes-installation, ACK'd by Matthias Drochner.
1998-10-28 14:14:45 +00:00
afd8d9361f
Add call to splsoftnet() in rt_timer_timer to avoid possible race
...
condition in deleting timer queue (PMTU) entries.
1998-10-28 05:01:11 +00:00
558bc32937
Add missing braces pointed out by egcs.
1998-10-28 04:28:32 +00:00
dd735283c1
Add `struct proc;' to keep egcs warnings happy in userland.
...
XXX why are kernel prototypes visible here at all?
1998-10-28 04:26:52 +00:00
096ffe523f
Fix a couple of string buffer overruns in lpt_ofisa_md_match()
...
From Richard Earnshaw, fixes PR6210.
1998-10-28 04:21:57 +00:00
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
7b111b4229
Support frame buffer console with Matrox Millennium(probably, and II).
...
But, NetBSD/bebox kernel doesn't support yet.
1998-10-28 02:47:35 +00:00
c884556c3d
Prevent loop caused by custom includes-target
1998-10-28 01:46:46 +00:00
04c995f517
Add support for media selection to the PCI front-end of the NE2000
...
driver. Currently supports:
RealTek 8029: 10base2, 10baseT, 10baseT-FDX, auto detect (but not FDX).
1998-10-28 00:15:54 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
13daec0fb1
Several things:
...
* Change the usage of B_DONE so that it is only set when a buffer is in sync
with the data on disk.
* If a buffer is being waited for, don't put it on the age queue.
* Make sure to clear B_DONE when pages are stolen from a buffer.
* Make sure to clear B_CACHE after each use.
* If we find a buffer for the block we want with valid data, but it is too
small, panic. (This isn't supposed to happen.)
Fixes potential file corruption problems with clustering.
1998-10-27 23:48:22 +00:00
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
925077cfb9
Holy smokes, batman! Actually fill in the "init_card" entry point!
1998-10-27 22:45:13 +00:00
a45667c4c3
Add register definitions for PCI NE2000-compatible extenstions, allowing
...
control over e.g. full-duplex mode, media, etc.
Currently, only extensions for the RealTek 8029 are defined.
1998-10-27 22:30:56 +00:00
1a5b9c6c30
Do not corrupt file flags when file system is full!
1998-10-27 21:32:58 +00:00
b26897f295
Initial bus_space support routines (should be common across
...
all platforms and buses).
1998-10-27 21:19:48 +00:00
4cbbe0abff
Latent support for revamped "local bus" support.
1998-10-27 21:18:52 +00:00
e5c050d79c
Cosmetic changes in product lookup, to match other drivers.
1998-10-27 19:49:37 +00:00
12fd61ebc9
PR/6356: Hubert Feyer: Linux emulation has problem w/ pipes
...
On linux we don't have syscalls that use retval[1] (edx). So don't
corrupt edx, because the compiler assumes that it has the same
value as before the syscall. Also, compute if we are running under
linux emulation in one place. XXX: Someday we should have a syscall
function per emulation and avoid the mess.
1998-10-27 18:04:27 +00:00
6463d10c79
Fix typo which prevented this from working
...
on disks without int13-extension support.
1998-10-27 14:08:55 +00:00
a541c86a76
Update version number and mention int13 extension support
...
(sorry, forgot this on the recent commit of the above).
1998-10-27 12:59:02 +00:00
2fd1cb5817
Regen.
1998-10-27 00:55:46 +00:00
64acdc1e7a
Product ID for Xircom CreditCard CE2 10base-T Ethernet.
1998-10-27 00:55:30 +00:00
890be8e6d7
Whoops! When looking at the return value from ptest040(), be sure
...
to handle the case of a TTx register hit.
1998-10-26 23:17:54 +00:00
7e430fc3fd
Install programs & files for pcvt.
1998-10-26 21:01:28 +00:00
ab941faefb
Make the kernel compile when the ALTXBUTTONS option is set.
...
Fixes PR#6363 from Frederick Bruckman (fb@enteract.com )
1998-10-26 19:20:00 +00:00
116ab7954f
This file has no real dependancies on SYSV ipc gunk.. so don't drag in headers
1998-10-26 19:11:57 +00:00
6f6b09a92a
s/SunOS/Ultrix/ in comment
1998-10-26 18:31:01 +00:00
ede30e2813
Fix a buglet when looking up an interface for multicast:
...
Zero out the routing structure before calling the route lookup code
in order to correctly match addresses.
1998-10-26 17:31:01 +00:00
9eb94a0c03
Must protect user-land from cpuvar.h; noticed by Juergen Hannken-Illjes.
1998-10-26 08:16:08 +00:00
f3c1682c65
No need for `#ifdef SUN4M' protection.
1998-10-26 08:12:15 +00:00
a83dff9c40
Make it compile for MRG_ADB kernels.
1998-10-26 07:09:37 +00:00
974ff0e869
Use the <machine/asm.h> macros, and don't call code that we haven't
...
included.
1998-10-26 07:07:34 +00:00
5af0d2da90
Don't hide the ADB hardware types when we're building an MRG_ADB kernel;
...
we really do need them around, anyway.
1998-10-26 07:06:41 +00:00
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
92d5be6614
Explicitly test Intel 82371AB PCI-ISA bridge since *some* of them
...
identify themselves as miscellaneous bridge rather than isa bridge.
1998-10-26 03:47:19 +00:00
c8a28ce872
Cosmetic change; use tab for basic indentation rather than four space.
1998-10-26 03:43:52 +00:00
709dd80ed0
Support frame buffer console initialized by the BootRom of the BeBox.
...
But, NetBSD/bebox kernel doesn't support yet.
1998-10-26 00:45:47 +00:00
ffe41a4f8f
Remove unused sc_iot/sc_ioh fields.
1998-10-25 23:48:56 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
c6457000db
Fix obvious typo in DEBUG code
1998-10-25 21:58:25 +00:00
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
6e73d89afc
PR/6274: John Ruschmeyer: Add isa/i386 ncr53c80 driver.
...
XXX: Needs work. We need to fix the probe/find goo, and add support for the
pas16 cards.
1998-10-25 18:41:56 +00:00
62b06e44c3
Add nca driver goo.
1998-10-25 18:40:17 +00:00
d6ebbdb79a
Fix -Wpointer-arith warning.
1998-10-25 17:39:52 +00:00
906db1e920
PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386.
1998-10-25 17:26:41 +00:00
262ba9ad95
Fix miscounting of length in syncicache().
1998-10-25 10:13:21 +00:00
70961a3e4c
mark native_to_svr4_errno as extern (avoids compiler warning).
1998-10-24 19:35:36 +00:00
e5d2a186e0
Finish Eric's changes.
1998-10-24 19:04:19 +00:00
7d7a80a8fd
Allow kdump to compile again.
1998-10-24 19:03:53 +00:00
da85408cb0
Define _REENTRANT if appropriate.
1998-10-24 16:30:56 +00:00
eec814ba1c
Remove argument name from function declaration.
1998-10-24 16:22:58 +00:00
bba8470ccb
KNF a missing bit. remove register.
1998-10-24 13:32:34 +00:00
9177fc99a7
Oops. People without I4B should still be able to compile a kernel.
1998-10-24 11:09:29 +00:00
4a961f034b
All m680?0 User Manuals claim that trap vectors are fetched from the data
...
cache, if found there (but not allocated in the data cache on trap).
No need to flush the data cache.
1998-10-24 10:48:34 +00:00
de51cf3531
Define and use CPU pause/resume IPI messages (until such times that I know
...
what the prom supplied versions actually do).
1998-10-24 08:12:55 +00:00
c85c920d03
Duh.. condition codes are not preserved when writing directly into %psr.
...
Also, we need to deal with bus latency when turning off bits in the
interrupt status register.
1998-10-24 08:04:07 +00:00
04062f718c
Cleanup kdbpeek() definition as noted in PR port-mips/5252.
1998-10-24 01:36:09 +00:00
e68e8297d2
Fix stacktrace alignment, in case of 64-bit stores into stackframes.
...
From pr port-mips/5536 from Castor Fu <castor@geocast.com>
1998-10-24 01:14:26 +00:00
bfc8ed8a50
Add "exphy" and "lxtphy" drivers.
1998-10-24 00:46:17 +00:00
86fca03a0d
Driver for the Level One LXT-970 10/100 Ethernet PHY.
1998-10-24 00:33:17 +00:00
67be755f17
DTRT if sfb is not configured in the kernel.
1998-10-23 23:49:31 +00:00
009398587b
This time, really add i4b to cdevsw[].
1998-10-23 23:03:02 +00:00
e9441f3a72
Garbage-collect obsolete "field" intpri from ibus_attach_args.
...
clean up initalizers to use correct, in-range values for ia_cookie,
which is what ibus children passed down to ibus_intr_establish.
1998-10-23 23:01:44 +00:00
732bba6038
oops, commit error. undo.
1998-10-23 22:38:26 +00:00
d90afeeba0
Call m_reclaim() in MCLGET() if initial pool allocation fails. Accidentally
...
removed when mbuf clusters were pool'ified.
1998-10-23 22:36:17 +00:00
8a6428e6be
Add entries for i4b devices / placeholders, like in i386 and Atari.
1998-10-23 22:14:27 +00:00
3de1dbaf24
add missing include that defined native_to_ibcs2_errno
1998-10-23 19:45:59 +00:00
9a06d5e2a6
Compute compile-time value of old-VM parameter MAX_KMAPENT from NPROC
...
(2x NPROC plus slop) unless expclitly set. Use current constant value
(100) as a lower bound, as suggested by Chuck Cranor.
Move NPROC and other parameter definitions from param.c to param.h so
they are visible to vm/vm_map.h.
Systems with hand-tuned NPROC should now support that many processes.
1998-10-23 19:37:32 +00:00
150020cdf2
add missing include that defined native_to_svr4_errno
1998-10-23 19:36:03 +00:00
thorpej