c755434d9d
Regen.
1998-11-05 03:43:57 +00:00
84def70194
Add AMD's OUI, and the model number for the AMD 79C873 10/100 Ethernet PHY.
1998-11-05 03:43:43 +00:00
a6f004d383
Corrected incorrect definition of child_return(). It only accepts one
...
argument.
1998-11-05 03:40:57 +00:00
74b81e824e
Add "ukphy".
1998-11-05 00:38:10 +00:00
567710942c
Add a driver for "generic unknown PHYs", meant as a catch-all for
...
PHYs we don't have specific drivers for. While this will not give
optimum operation, it will allow network interface drivers to at least
function while drivers for their specific PHYs are written.
1998-11-05 00:36:48 +00:00
7d76571fd1
Tidy up the message from mii_print() somewhat.
1998-11-05 00:30:44 +00:00
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
8634976fb2
Move conversion of PRAM-time to UNIX-time to clock.c (like mac68k).
1998-11-04 15:06:13 +00:00
28411139b3
be consistent with locking of amaps and anons when freeing them.
1998-11-04 07:07:22 +00:00
e4c4ea06b4
remove outdated comment.
1998-11-04 07:06:05 +00:00
2d3363a6d0
regen.
1998-11-04 06:41:57 +00:00
b0e0dc2101
(manufacturer, product) = (0x149, 0x265) is used both
...
"Linksys EthernetCard" and some new versions of "D-Link DE-650".
Changed the product string as such.
1998-11-04 06:40:54 +00:00
5bf12ef4b9
Allow newer versions of D-Link DE650 cards (the manufacturer and
...
the product are valid and the same as Linksys EthernetCard's) work
with the current ne driver.
Somewhat kludgy.
1998-11-04 06:37:09 +00:00
23ed4b5656
we must unlock a vp's object's lock before calling vrele().
1998-11-04 06:21:40 +00:00
61458d7dfa
LOCKDEBUG enhancements for non-MP:
...
keep a list of locked locks.
use this to print where the lock was locked
when we either go to sleep with a lock held
or try to free a locked lock.
1998-11-04 06:19:55 +00:00
42921bd66d
Add the ex driver.
1998-11-04 00:40:03 +00:00
21ab4a980a
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards.
1998-11-04 00:31:59 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
28221c24db
Add info for ex driver.
1998-11-04 00:28:05 +00:00
6768f892cc
Add sqphy.
1998-11-03 23:52:50 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
46f5a5f507
Make "src/sys/arch/i386/stand" compile again.
1998-11-03 22:00:37 +00:00
873f0be1cd
Sync with files in "src/lib/libz".
1998-11-03 15:49:39 +00:00
4401599ff3
These should have been added together with leo.c a long while ago :-( Thanks
...
to 'entropy' for keeping an eye on me...
1998-11-03 14:50:15 +00:00
0b3665db48
Add "Paddington" ID.
1998-11-03 12:15:57 +00:00
44dfb8ea2c
Define the size of the members of utsname in terms of _SYS_NMLN, and
...
define SYS_NMLN if not POSIX or XOPEN source.
1998-11-03 10:08:32 +00:00
7fe67ebc21
Add support for the Seeq 80c24 AutoDUPLEX media interface which was nuked
...
when this driver was changed to use the MAC-independent MII code. This
"PHY" does not have a programming interface, but simply senses the duplex
mode from the link partner. Since it is not possible to read the 80c24
to determine the link type or status, we consider this to be "manual".
1998-11-03 05:47:38 +00:00
cbcaaa3bc3
Make sure that a delay loop actually has some delay in it, and use IFF_OACTIVE
...
as appropriate.
1998-11-03 05:04:49 +00:00
49d750db09
Regen.
1998-11-03 05:02:25 +00:00
8adfcb5246
Define the model ID of the Seeq 84220 10/100 PHY.
1998-11-03 05:01:49 +00:00
19fd5d178f
3Com PHY can't be isolated, so don't allow IFM_NONE.
1998-11-03 00:18:18 +00:00
ec38cdc6d9
Add icsphy*.
1998-11-03 00:12:45 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
1f074c785d
When doing a media change service request, use the media word from the
...
current ifmedia_entry, not from the user-supplied media word. The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.
Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
1998-11-02 22:31:36 +00:00
be4ce8c3f4
Add "10baseT-FDX" and "100baseTX-FDX" aliases to the end of the subtype
...
table. These are actually subtype+option combos, but these are the
strings displayed by the MII code to indicate 10Mbps full-duplex and
100Mbps full-duplex respectively, and it's Nice that ifconfig(8) can
grok them.
1998-11-02 22:10:26 +00:00
67f74ebee4
Implement the new BUFCACHE option.
1998-11-02 07:43:37 +00:00
cee6f4a531
Implement the new BUFCACHE option.
1998-11-02 04:43:23 +00:00
d9b5b0b01a
Sync with files in "src/lib/libz".
1998-11-01 21:28:51 +00:00
e45fa5e3bb
add version for libkeycap
1998-11-01 17:14:27 +00:00
eccf9ccdd8
s|share/misc|share/pcvt|
1998-11-01 16:37:06 +00:00
d04b2d9043
implement BUFCACHE, which sets the size of the buffer cache to BUFCACHE %
...
of physmem. if not set (or == 0), falls back to old sizing method.
1998-11-01 09:51:09 +00:00
1cfb41e0d6
make this compile again (missing semi-colon)
1998-11-01 01:04:48 +00:00
3bcd2ef84d
fix botched printout format
1998-11-01 00:03:08 +00:00
82b48f66b6
If NSIO not defined, compile errors.
1998-10-31 23:51:05 +00:00
e4d73206ab
Make the exec header an automatic variable, instead of malloc()ed space.
...
Saves 60 bytes of code.
1998-10-31 22:40:27 +00:00
d08eb2a32b
Add code to detect a RealTek 8019 chip, and use the media selection
...
support if present.
1998-10-31 01:44:16 +00:00
32a315ff7c
Use the so_send and so_receive funcptrs in the socket instead of calling
...
sosend/soreceive directly. [I've been meaning to commit these for months.]
1998-10-31 01:18:41 +00:00
7d4ee06d3e
Use the rtl80x9 common code for media selection.
1998-10-31 00:45:48 +00:00
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
266aaad811
Define the "rtl80x9" attribute, to pull in code common to RealTek 8019
...
and 8029 NE2000-compatible Ethernet chips.
1998-10-31 00:43:19 +00:00
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
de14bf4f80
Manuel confirms that defaulting to AUTO is ok, to Do It.
1998-10-30 23:30:16 +00:00
2e00799098
Conditionalize include of <lib/libkern/libkern.h> with _STANDALONE (like
...
libsa/nfs.c does). Fixes VAX libsa build problem.
1998-10-30 16:56:30 +00:00
80e1cdcee7
s/milieconds/milliseconds/
1998-10-30 13:47:02 +00:00
2791cf041a
Fix a thinko which still prevented this to run on non-int13-ext machines.
...
Thanks to entropy@zippy.bernstein.com for pointing this out and testing the fix.
1998-10-30 12:16:59 +00:00
9d3eea92f4
Add DOS partition handling, from Ken Nakata in PR 4999, with
...
only slight tweaking by me.
XXX - does not currently handle NetBSD/i386 or 386BSD/FreeBSD partitions.
1998-10-30 06:48:51 +00:00
c8546bdb7b
Enforce a lower bound of (RAW_PART + 1) on the number of partitions
...
read from the Mac partition table. From Ken Nakata in PR 4999.
1998-10-30 05:27:15 +00:00
ed473183ef
Define the FORMAT UNIT command, and several related structures.
1998-10-30 02:07:15 +00:00
6020153959
- Assign copyright terms.
1998-10-30 00:53:12 +00:00
074bc27605
- Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
...
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
7cc47ae9b9
Pay attention to the share_size field in the filecore boot block in
...
filecore_map(). From Andrew McMurry.
Closes PR 6343
1998-10-29 23:18:57 +00:00
ba531b48c6
Use console_debugger() hook to enter DDB.
1998-10-29 21:25:17 +00:00
3ac3cbcfb8
Add options DDB_FROMCONSOLE and sysctl ddb.fromconsole, analagous to
...
DDB_ONPANIC. Lets user ignore breaks but enter DDB on panic. Intended
for machines where debug on panic is useful, but DDB entry is not,
(public-access console, or terminal-servers which send spurious breaks)
Add new ddb hook, console_debugger(), which decides whether or not to
ignore console ddb requests. Console drivers should be updated to call
console_debugger(), not Debugger(), in response to serial-console
break or ddb keyboard sequence.
1998-10-29 21:22:32 +00:00
e29350c92c
- Introduce MI NWSCONS drivers for TURBOchannel framebuffer option cards.
...
N.B., Digital UNIX never supports neither PMAG-AA (mfb) nor PMAG-BA (cfb)
for TC Alphas. PMAG-DV (xcfb) is Personal DECstation built in. All should
be good for console, but need much works for cursor/colormap completeness.
1998-10-29 12:24:24 +00:00
9ddbeaedbb
- match if the function just probing is disk and its interface is ATA.
...
- use product table only for the card which requires quirks or doesn't
have disk device interface tuple.
1998-10-29 09:49:51 +00:00
3f3c763b1b
Define some constants for function extension tuple of disk function.
1998-10-29 09:45:52 +00:00
634f1b5bf7
fix typo and some indentation.
1998-10-29 09:42:45 +00:00
5211fed3ab
Michael Hitch's fix to dtop handler:
...
make handler FSM robust enough to not lose its place after data overrun.
stops keyboard from going catatonic.
1998-10-29 04:54:20 +00:00
d103f66935
Switch the Amiga port to UVM.
1998-10-28 22:41:24 +00:00
27e57114e1
Add support for macppc
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 21:06:27 +00:00
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
626749ed68
Venus must be passed O_CREAT flag on VOP_OPEN iff this is
...
a creat so that we can will allow a mode 444 file to be
written into. Sync with the latest coda.h and deal with
collateral damage.
1998-10-28 19:54:47 +00:00
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
bc70dd6bc5
Cleanup includes-installation, ACK'd by Matthias Drochner.
1998-10-28 14:14:45 +00:00
afd8d9361f
Add call to splsoftnet() in rt_timer_timer to avoid possible race
...
condition in deleting timer queue (PMTU) entries.
1998-10-28 05:01:11 +00:00
558bc32937
Add missing braces pointed out by egcs.
1998-10-28 04:28:32 +00:00
dd735283c1
Add `struct proc;' to keep egcs warnings happy in userland.
...
XXX why are kernel prototypes visible here at all?
1998-10-28 04:26:52 +00:00
096ffe523f
Fix a couple of string buffer overruns in lpt_ofisa_md_match()
...
From Richard Earnshaw, fixes PR6210.
1998-10-28 04:21:57 +00:00
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
7b111b4229
Support frame buffer console with Matrox Millennium(probably, and II).
...
But, NetBSD/bebox kernel doesn't support yet.
1998-10-28 02:47:35 +00:00
c884556c3d
Prevent loop caused by custom includes-target
1998-10-28 01:46:46 +00:00
04c995f517
Add support for media selection to the PCI front-end of the NE2000
...
driver. Currently supports:
RealTek 8029: 10base2, 10baseT, 10baseT-FDX, auto detect (but not FDX).
1998-10-28 00:15:54 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
13daec0fb1
Several things:
...
* Change the usage of B_DONE so that it is only set when a buffer is in sync
with the data on disk.
* If a buffer is being waited for, don't put it on the age queue.
* Make sure to clear B_DONE when pages are stolen from a buffer.
* Make sure to clear B_CACHE after each use.
* If we find a buffer for the block we want with valid data, but it is too
small, panic. (This isn't supposed to happen.)
Fixes potential file corruption problems with clustering.
1998-10-27 23:48:22 +00:00
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
925077cfb9
Holy smokes, batman! Actually fill in the "init_card" entry point!
1998-10-27 22:45:13 +00:00
a45667c4c3
Add register definitions for PCI NE2000-compatible extenstions, allowing
...
control over e.g. full-duplex mode, media, etc.
Currently, only extensions for the RealTek 8029 are defined.
1998-10-27 22:30:56 +00:00
1a5b9c6c30
Do not corrupt file flags when file system is full!
1998-10-27 21:32:58 +00:00
b26897f295
Initial bus_space support routines (should be common across
...
all platforms and buses).
1998-10-27 21:19:48 +00:00
4cbbe0abff
Latent support for revamped "local bus" support.
1998-10-27 21:18:52 +00:00
e5c050d79c
Cosmetic changes in product lookup, to match other drivers.
1998-10-27 19:49:37 +00:00
12fd61ebc9
PR/6356: Hubert Feyer: Linux emulation has problem w/ pipes
...
On linux we don't have syscalls that use retval[1] (edx). So don't
corrupt edx, because the compiler assumes that it has the same
value as before the syscall. Also, compute if we are running under
linux emulation in one place. XXX: Someday we should have a syscall
function per emulation and avoid the mess.
1998-10-27 18:04:27 +00:00
6463d10c79
Fix typo which prevented this from working
...
on disks without int13-extension support.
1998-10-27 14:08:55 +00:00
a541c86a76
Update version number and mention int13 extension support
...
(sorry, forgot this on the recent commit of the above).
1998-10-27 12:59:02 +00:00
2fd1cb5817
Regen.
1998-10-27 00:55:46 +00:00
64acdc1e7a
Product ID for Xircom CreditCard CE2 10base-T Ethernet.
1998-10-27 00:55:30 +00:00
890be8e6d7
Whoops! When looking at the return value from ptest040(), be sure
...
to handle the case of a TTx register hit.
1998-10-26 23:17:54 +00:00
7e430fc3fd
Install programs & files for pcvt.
1998-10-26 21:01:28 +00:00
ab941faefb
Make the kernel compile when the ALTXBUTTONS option is set.
...
Fixes PR#6363 from Frederick Bruckman (fb@enteract.com )
1998-10-26 19:20:00 +00:00
116ab7954f
This file has no real dependancies on SYSV ipc gunk.. so don't drag in headers
1998-10-26 19:11:57 +00:00
6f6b09a92a
s/SunOS/Ultrix/ in comment
1998-10-26 18:31:01 +00:00
ede30e2813
Fix a buglet when looking up an interface for multicast:
...
Zero out the routing structure before calling the route lookup code
in order to correctly match addresses.
1998-10-26 17:31:01 +00:00
9eb94a0c03
Must protect user-land from cpuvar.h; noticed by Juergen Hannken-Illjes.
1998-10-26 08:16:08 +00:00
f3c1682c65
No need for `#ifdef SUN4M' protection.
1998-10-26 08:12:15 +00:00
a83dff9c40
Make it compile for MRG_ADB kernels.
1998-10-26 07:09:37 +00:00
974ff0e869
Use the <machine/asm.h> macros, and don't call code that we haven't
...
included.
1998-10-26 07:07:34 +00:00
5af0d2da90
Don't hide the ADB hardware types when we're building an MRG_ADB kernel;
...
we really do need them around, anyway.
1998-10-26 07:06:41 +00:00
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
92d5be6614
Explicitly test Intel 82371AB PCI-ISA bridge since *some* of them
...
identify themselves as miscellaneous bridge rather than isa bridge.
1998-10-26 03:47:19 +00:00
c8a28ce872
Cosmetic change; use tab for basic indentation rather than four space.
1998-10-26 03:43:52 +00:00
709dd80ed0
Support frame buffer console initialized by the BootRom of the BeBox.
...
But, NetBSD/bebox kernel doesn't support yet.
1998-10-26 00:45:47 +00:00
ffe41a4f8f
Remove unused sc_iot/sc_ioh fields.
1998-10-25 23:48:56 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
c6457000db
Fix obvious typo in DEBUG code
1998-10-25 21:58:25 +00:00
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
6e73d89afc
PR/6274: John Ruschmeyer: Add isa/i386 ncr53c80 driver.
...
XXX: Needs work. We need to fix the probe/find goo, and add support for the
pas16 cards.
1998-10-25 18:41:56 +00:00
62b06e44c3
Add nca driver goo.
1998-10-25 18:40:17 +00:00
d6ebbdb79a
Fix -Wpointer-arith warning.
1998-10-25 17:39:52 +00:00
906db1e920
PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386.
1998-10-25 17:26:41 +00:00
262ba9ad95
Fix miscounting of length in syncicache().
1998-10-25 10:13:21 +00:00
70961a3e4c
mark native_to_svr4_errno as extern (avoids compiler warning).
1998-10-24 19:35:36 +00:00
e5d2a186e0
Finish Eric's changes.
1998-10-24 19:04:19 +00:00
7d7a80a8fd
Allow kdump to compile again.
1998-10-24 19:03:53 +00:00
da85408cb0
Define _REENTRANT if appropriate.
1998-10-24 16:30:56 +00:00
eec814ba1c
Remove argument name from function declaration.
1998-10-24 16:22:58 +00:00
bba8470ccb
KNF a missing bit. remove register.
1998-10-24 13:32:34 +00:00
9177fc99a7
Oops. People without I4B should still be able to compile a kernel.
1998-10-24 11:09:29 +00:00
4a961f034b
All m680?0 User Manuals claim that trap vectors are fetched from the data
...
cache, if found there (but not allocated in the data cache on trap).
No need to flush the data cache.
1998-10-24 10:48:34 +00:00
de51cf3531
Define and use CPU pause/resume IPI messages (until such times that I know
...
what the prom supplied versions actually do).
1998-10-24 08:12:55 +00:00
c85c920d03
Duh.. condition codes are not preserved when writing directly into %psr.
...
Also, we need to deal with bus latency when turning off bits in the
interrupt status register.
1998-10-24 08:04:07 +00:00
04062f718c
Cleanup kdbpeek() definition as noted in PR port-mips/5252.
1998-10-24 01:36:09 +00:00
e68e8297d2
Fix stacktrace alignment, in case of 64-bit stores into stackframes.
...
From pr port-mips/5536 from Castor Fu <castor@geocast.com>
1998-10-24 01:14:26 +00:00
bfc8ed8a50
Add "exphy" and "lxtphy" drivers.
1998-10-24 00:46:17 +00:00
86fca03a0d
Driver for the Level One LXT-970 10/100 Ethernet PHY.
1998-10-24 00:33:17 +00:00
67be755f17
DTRT if sfb is not configured in the kernel.
1998-10-23 23:49:31 +00:00
009398587b
This time, really add i4b to cdevsw[].
1998-10-23 23:03:02 +00:00
e9441f3a72
Garbage-collect obsolete "field" intpri from ibus_attach_args.
...
clean up initalizers to use correct, in-range values for ia_cookie,
which is what ibus children passed down to ibus_intr_establish.
1998-10-23 23:01:44 +00:00
732bba6038
oops, commit error. undo.
1998-10-23 22:38:26 +00:00
d90afeeba0
Call m_reclaim() in MCLGET() if initial pool allocation fails. Accidentally
...
removed when mbuf clusters were pool'ified.
1998-10-23 22:36:17 +00:00
8a6428e6be
Add entries for i4b devices / placeholders, like in i386 and Atari.
1998-10-23 22:14:27 +00:00
3de1dbaf24
add missing include that defined native_to_ibcs2_errno
1998-10-23 19:45:59 +00:00
9a06d5e2a6
Compute compile-time value of old-VM parameter MAX_KMAPENT from NPROC
...
(2x NPROC plus slop) unless expclitly set. Use current constant value
(100) as a lower bound, as suggested by Chuck Cranor.
Move NPROC and other parameter definitions from param.c to param.h so
they are visible to vm/vm_map.h.
Systems with hand-tuned NPROC should now support that many processes.
1998-10-23 19:37:32 +00:00
150020cdf2
add missing include that defined native_to_svr4_errno
1998-10-23 19:36:03 +00:00
354f32509f
Pass the rigth argument to wdcintr(). Closes PR 6342.
1998-10-23 13:58:17 +00:00
4c127bdcd4
Include linux_errno.h to fix the recent error->errno losage.
1998-10-23 10:54:58 +00:00
813dd6128b
Rename svr4_error to native_to_svr4_errno.
1998-10-23 04:06:00 +00:00
177a7fac85
Moved to svr4_errno.c,v
1998-10-23 04:02:18 +00:00
436999b6cd
Moved from svr4_error.c,v
1998-10-23 04:02:17 +00:00
907ec5233d
linux_error.c moved to linux_errno.c
1998-10-23 03:56:22 +00:00
8b351f0104
Change linux_error to native_to_linux_errno. Add some (unrelated) debugging printfs.
1998-10-23 03:53:18 +00:00
76aa1f4bcf
Moved to linux_errno.c,v
1998-10-23 03:46:25 +00:00
a766015254
Moved from linux_error.c,v
1998-10-23 03:45:37 +00:00
36d1163663
Move ibcs2_error.c back to ibcs2_errno.c. Old name was more descriptive. Make it more so and use "native_to_ibcs2_errno".
1998-10-23 03:22:59 +00:00
afbf922a93
Don't print the revision of the 3c905B-TX's internal PHY; it's meaningless.
1998-10-23 01:52:50 +00:00
322ba3cc84
Make sure the parent is an `ex'. The 3c905B-TX's internal PHY isn't
...
the only one w/ non-existent ID registers. SIGH.
1998-10-23 01:43:09 +00:00
2055d846f9
New ADB "bus" interface:
...
o Separate ms and kbd drivers
o aed device for compatibility
o debug message cleanup in hardware direct support (from scottr)
1998-10-23 01:16:22 +00:00
978c3d97f5
For consistency w/ FFS/LFS, define EXT2_DINODE_SIZE, and use it instead
...
of pointer arithmetic and/or sizeof(struct ext2fs_dinode).
1998-10-23 00:33:23 +00:00
5ecbc50348
Use DINODE_SIZE rather than sizeof(struct dinode).
1998-10-23 00:32:35 +00:00
f7948d05a1
Use DINODE_SIZE rather than pointer arithmetic.
1998-10-23 00:31:28 +00:00
c8a2232a27
Define a symbolic constant to represent the size of a dinode.
1998-10-23 00:28:45 +00:00
0582e98991
Treat Wangtek QIC-150 SCSI tapes the same as Viper, so they work on
...
3100s as well as with the asc driver.
1998-10-22 23:01:45 +00:00
b301435840
back out last change - this file in unrelated to wscons stuff
1998-10-22 18:50:17 +00:00
01d6f66b07
adapt to keyboard driver changes
1998-10-22 18:37:57 +00:00
dd1e5f373e
Define LINUX_GCC_SIGNATURE.
1998-10-22 18:13:02 +00:00
00d699282f
separate keyboard handling from serial interface handling some more,
...
improve bell handling, initialize kbd on powerup
1998-10-22 17:55:20 +00:00
31dec5ddc5
Add config flags for pciide: 0x001 forces the use of DMA when the driver
...
don't know how to set the controller's modes.
1998-10-22 15:11:39 +00:00
f6490fe309
- General cleanups for NWSCONS zskbd.c and zsms.c Comments for
...
future improvement work.
1998-10-22 08:37:16 +00:00
5cb5f44921
Defopt ALTXBUTTONS, DISABLE_EXT_CACHE, and ZS_CONSOLE_ABORT.
1998-10-22 04:36:50 +00:00
b70011edac
wscons mouse interface for DEC mice off the Zilog SCC.
...
Ported from dev/sun/ms.c by Takuya Koumoto <takuya-k@is.aist-nara.ac.jp>.
1998-10-22 01:56:55 +00:00
2db4e51dad
Kernel config for wscons/serial console support for TC alphas, based on
...
GENERIC. This can go away when NEW_SCC_DRIVER hits prime-time.
1998-10-22 01:05:36 +00:00
ab9470909c
Preliminary support for both serial consoles and kbd/display wscons
...
consoles for TC alphas. Based on code from Takuya Koumoto
<takuya-k@is.aist-nara.ac.jp> as well as some parts of Toru Nishimura's
and Matthias Drochner's work on pmax wscons. This relies on the
NEW_SCC_DRIVER.
1998-10-22 01:03:07 +00:00
605b15b723
Code from Toru Nishimura and Matthias Drochner work on pmax wscons in a
...
very slightly modified form for wscons support on the TC alpha.
XXX This could use some more work, but this code should be sharable
among the alpha and pmax systems as-is.
1998-10-22 00:53:24 +00:00
a8950dafc6
Updates from Takuya Kuomoto for wscons support for TC alphas.
1998-10-22 00:50:00 +00:00
bac6bb6bf2
No need to get definition of "SYSV..." from "opt_sysv.h" because they
...
must be set if these files are compiled.
1998-10-21 22:24:28 +00:00
42ed21663a
Make boot recognize MSCP disks on VAX8200. From Sergey Svishchev.
1998-10-21 20:16:33 +00:00
88d1b8138c
If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
...
splbio.
1998-10-21 09:12:46 +00:00
325ecdada1
Use PCI function number correctly.
1998-10-21 08:58:36 +00:00
890e54bee0
Pull in cpuvar.h to get definition of `curproc'.
1998-10-21 07:11:47 +00:00
c0ba12768e
Fix a sight open flags buglet pointed out by Matthias Scheler.
1998-10-20 22:26:04 +00:00
a2386d4325
fully implement soft callback usage
1998-10-20 22:18:13 +00:00
8aaec6d337
Fix typo.
1998-10-20 21:28:32 +00:00
1074ab2039
Make seq_input_event() static to avoid a name clash with the (commercial)
...
OSS audio LKM.
1998-10-20 21:19:22 +00:00
1456b01d77
Fix for Apollo DMA mode (not UDMA): DMA mode = PIO mode - 2, not PIO mode + 2 !
1998-10-20 18:47:45 +00:00
ce89209d42
when transmitting we cannot totally fill the circular buffer (i.e.
...
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter. spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
794fadcf0a
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
7bdbb5c993
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt(). Also use interrupts for wd_get_params in wdopen().
1998-10-20 17:00:25 +00:00
a7c841cfbc
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:24 +00:00
e6efdfc6af
Add via-pmu support.
1998-10-20 15:13:14 +00:00
330d14c254
Oops, forgot to add them.
1998-10-20 14:59:16 +00:00
6f402eb495
Add via-pmu support (only PowerBook 2400c/180 is tested).
1998-10-20 14:56:30 +00:00
e35fe182af
Remove commented out OPTIONS DEC_5100 line - there was already an
...
uncommented line above for the 5100.
Mention "kn04" (the 5000/150) on the DEC_3MIN options line.
1998-10-20 03:03:04 +00:00
3ad026ac87
vax -> __vax__ (and mips to __mips__ in ultrix_misc.c)
1998-10-20 01:46:27 +00:00
167e694c99
Regen.
1998-10-20 01:39:41 +00:00
1715793000
Add RealTek 8129 and 8139 10/100Mb Ethernet IDs.
1998-10-20 01:38:57 +00:00
f69c40b8be
Fix a memory leak in fxp_stop(), from the FreeBSD driver.
1998-10-19 23:51:15 +00:00
eb17acb9b3
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:43:58 +00:00
f8bd8df018
Regen.
1998-10-19 22:43:25 +00:00
597d72777a
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:43:00 +00:00
79239684ae
Regen.
1998-10-19 22:41:06 +00:00
8eca167a73
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:40:29 +00:00
7453aacea0
Regen.
1998-10-19 22:39:49 +00:00
120e9f4e91
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:37:53 +00:00
c716a334aa
Regen.
1998-10-19 22:36:29 +00:00
6d456ade27
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:34:49 +00:00
3c8085dd6e
Regen.
1998-10-19 22:32:51 +00:00
e8603a0b66
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:31:50 +00:00
3461a6eb39
Regen.
1998-10-19 22:28:16 +00:00
ccb04baa10
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:26:39 +00:00
76a0f5408b
Regen.
1998-10-19 22:25:55 +00:00
c71ccab136
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:21:19 +00:00
b24a609bde
1.72:Regen.
1998-10-19 22:19:28 +00:00
e0a4ca3026
1.92:Regen.
1998-10-19 22:19:27 +00:00
bb56b72356
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:19:27 +00:00
f87a1b6e7a
1.93:Regen.
1998-10-19 22:19:26 +00:00
fe8170d1b1
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:19:26 +00:00
06fb47025e
1.99:Regen.
1998-10-19 22:19:25 +00:00
39876df951
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:14:54 +00:00
b296275bb4
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:09:13 +00:00
3ebe847640
Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided
...
after more sleep.
1998-10-19 22:00:14 +00:00
249f0890d0
Sync with "GENERIC".
1998-10-19 18:19:55 +00:00
ec954fdc40
Add 'uk at atapibus'.
1998-10-19 12:29:55 +00:00
f6f8ba3446
Allow uk to attach at atapibus.
1998-10-19 12:28:52 +00:00
5f723da8af
Move the "warning: bcount value is %d after io" message in a WDCDEBUG_PRINT.
...
Ifdef DIAGNOSTIC, print the above message only if bcount is < 0.
1998-10-19 12:28:03 +00:00
22acea3cb7
Fix a comment.
1998-10-19 12:26:22 +00:00
c90c4b829b
Add support for the second flavour of the VIA IDE chip (which has UDMA).
...
Don't claim DMA support if we don't have explicit support for this chip.
They're to may way to loose when trying to use DMA without configuring the
controller and disks.
1998-10-19 12:24:33 +00:00
04bdcc421c
Regen.
1998-10-19 12:13:57 +00:00
682ee5fdf3
Yet another attemp at getting the VIA tech. product name/ID's rigth.
...
It seems that different products have the same name (sigh).
1998-10-19 12:11:50 +00:00
59000618ac
Remove useless 'flags' for wdc ata isapnp.
1998-10-19 12:06:55 +00:00
f0529fccf5
Maintain a current process (`curproc') a per CPU.
1998-10-19 11:56:43 +00:00
2d45ece0e7
Allow `curproc' to be defined in <machine/proc.h> to enable a transition
...
to SMP support.
1998-10-19 11:51:53 +00:00
ba0625f1f5
vm_offset_t no longer exists. Change to paddr_t, vaddr_t, and psize_t.
1998-10-19 00:32:44 +00:00
549cd579e5
shift by PAGE_SHIFT instead of multiplying or dividing by PAGE_SIZE.
1998-10-18 23:49:59 +00:00
eaafa2dbd1
Zero-initialize the initial u-area. This cures the "random process killed
...
by SIGPROF or SIGVTALRM" syndrome.
1998-10-18 22:00:17 +00:00
18b6b32a67
Support for DWBUA (BI to Unibus adapter) and KLESI-B (TMSCP tape ctlr) added.
1998-10-18 18:47:18 +00:00
49dd2f5055
Need <sys/device.h>
1998-10-18 18:39:43 +00:00
adc5eb3a57
Fix a thinko in previous.
1998-10-18 17:15:04 +00:00
c2339a1799
Make error array look like ibcs2, svr4, and linux
1998-10-18 17:00:32 +00:00
e26890e06b
Rename ibcs2_errno.c -> ibcs2_error.c to match with linux and svr4
1998-10-18 16:59:14 +00:00
09285b1171
PR/6311: By me... There was a bug unloading the dmamap:
...
addr = map->dm_segs[0].ds_addr & ~PGOFSET;
len = map->dm_segs[0].ds_len;
len = ((addr & PGOFSET) + len + PGOFSET) & ~PGOFSET;
addr &= ~PGOFSET;
Notice that the & ~PGOFSET in the first line should be gone. This fixes
the newfs large disk panic.
1998-10-18 16:02:34 +00:00
8a9206b6fd
Add CAPS_IS_CTL option
1998-10-18 12:21:51 +00:00
07e2c44982
Make compilable without aed.
1998-10-18 09:52:16 +00:00
541bc2d3d7
Add wsmouse support.
1998-10-18 09:31:40 +00:00
2a9addf6dc
Remove unwanted reference to "_trap1" if !defined(COMPAT_13).
1998-10-18 04:42:17 +00:00
c4ffdb9200
dumpsize == 0 also indicates failure to figure out where to dump
...
(e.g. dump partition too small), so complain in that case when trying to
dump
1998-10-17 00:07:11 +00:00
0bf09a4ae7
Drop cpuinfo's `L1_ptps'; instead keep a per CPU segment (level 2) page
...
table descriptor that is used to patch up a region (level 1) page table
associated with a user pmap at context switch time.
1998-10-16 22:39:17 +00:00
000978aaca
Check for gcc the Right way when quashing -Wuninitialized goop.
1998-10-16 19:34:57 +00:00
d65dc0de3b
Make ourseg visible to the outside similar to bootsect/start_bootsect.S
...
(Thanks to hannken@eis.cs.tu-bs.de for pointing this out).
1998-10-16 18:07:35 +00:00
bf32feec28
More >2Gb fixes, from Constantine Sapuntzakis.
1998-10-16 14:29:40 +00:00
79a031f9d3
Configuration for new CVS server.
1998-10-16 00:30:53 +00:00
3707ad314c
History. INSTALL is now used on the floppy set and combo CD/HD/tape image.
1998-10-16 00:15:15 +00:00
5bdff43727
Initialize default disklabel properly: Whole disk is RAW_PART, not 'a'.
1998-10-15 19:08:33 +00:00
337bfd46a5
change handling of libkern:
...
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
1998-10-15 18:46:37 +00:00
2468738337
change handling of libkern:
...
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way
1998-10-15 18:37:13 +00:00
34f348a9e4
Work around gcc warning.
1998-10-15 18:01:49 +00:00
f82918b49b
Add int13 extension support
1998-10-15 15:28:22 +00:00
50aa1b9d51
Add the IDT WinChip C6 to the cpu type table.
1998-10-15 15:26:01 +00:00
3b892dd579
/chaos/control support. (tested 640x480 mode only)
1998-10-15 14:48:47 +00:00
810fcde7eb
Set PCI bus number correctly.
1998-10-15 14:39:53 +00:00
28b3386649
Add CPUVENDOR_IDT and CPU_C6.
1998-10-15 13:40:33 +00:00
999d5323c0
Make CPURESET_DELAY a patcheable variable, as sugested by Chris G. Demetriou.
1998-10-15 11:41:28 +00:00
96a0812fd8
Kill an extra printf("\n").
1998-10-15 11:38:04 +00:00
d153ad6324
Some const poisioning.
1998-10-15 07:06:47 +00:00
a9a911bdba
Add .type pseudo-ops needed for shared libraries.
1998-10-15 06:01:11 +00:00
859b5d88a6
Protect kernel prototypes w/ #ifdef _KERNEL.
1998-10-15 05:11:52 +00:00
2ebdceb3f7
Forward decl of struct proc.
1998-10-15 05:10:20 +00:00
ee042cb008
Disable the I/O address, DRQ and IRQ validation; assume that the config file
...
is sane.
1998-10-15 04:05:53 +00:00
d2d873481a
pcic_wait_ready(): If we didn't get READY, print out the current status.
1998-10-15 04:04:43 +00:00
0450169fae
1. Avoid snarfing label areas unless necessary; read with monotonically
...
increasing block numbers and don't reread cylinder 0.
2. Recognize the USTAR.... meta-info file...kind of like a super-block,
it makes the volume size and label info programmable.
1998-10-15 01:11:46 +00:00
3e35915bc3
Don't use big 16K blocks for the -b contiguous secondary boot installation.
...
It leads to confusion about where the end of the image is on tape boots.
1998-10-15 01:05:20 +00:00
16bf3552bb
Save a0 during bss clear.
1998-10-15 01:02:55 +00:00
9f7ca48f3b
Delete prom_open() wrapper routine. Other clients of prom_open
...
can use the prom.h dispatch macros instead, especially since they
all presently expect the raw return bits.
1998-10-15 01:02:15 +00:00
c84b7f501e
Delete bogus prom_open() prototype.
1998-10-15 01:00:56 +00:00
412f6ae85b
Grab booted_dev_fd parameter from bootxx. It won't be there for netboot
...
but there should be no harm done.
1998-10-15 01:00:07 +00:00
6336abe01a
const'ify
1998-10-15 00:56:56 +00:00
df51a43618
Rototill the primary boot for...
...
1. much faster speed
2. support of more media types
1998-10-15 00:55:48 +00:00
c33589db84
Consult osrelease.sh and pass down NETBSD_VERS
1998-10-15 00:52:38 +00:00
74f36b2497
Try the ustarfs open first...it's the only one that can't necessarily
...
seek. We might be reading a tape and the extra superblock reads will
eat up tape records.
1998-10-15 00:51:22 +00:00
9c29657a67
Extern def for raw prom disk file descriptor.
1998-10-15 00:49:34 +00:00
b0367fb980
Don't actually do the raw prom open here.
1998-10-15 00:48:55 +00:00
8447dd624c
1. STANDALONE -> _STANDALONE
...
2. Key raw prom interfaces defes on ENABLEPROM
3. Define the prom "ioctl" magtape functions.
1998-10-15 00:47:28 +00:00
d4e2b18bb1
Define ENABLEPROM, which turns on the raw prom interface defs.
1998-10-15 00:45:52 +00:00
8caffffa3e
Activate cleandir (and distclean), as suggested in PR 6244 by
...
Frederick Bruckman.
1998-10-14 20:45:43 +00:00
6413810bf3
Stop spurious lpt messages from being printed -- approved by fvdl.
1998-10-14 20:09:06 +00:00
495a4bdb2c
Sync with new IDE support (e.g. pciide changes)
1998-10-14 18:31:34 +00:00
8f460d30f6
Nuke spurious ;
1998-10-14 18:05:45 +00:00
f8e4127109
Remove pciide definitions in files.alpha since they are now in files.pci
1998-10-14 18:00:11 +00:00
fd966585a1
Turn on the counter at each CPU (we fear nothing..)
1998-10-14 14:53:36 +00:00
afcfa7d7fa
Let all CPUs spin at spl0.
1998-10-14 14:47:20 +00:00
631a48776f
Don't allocate two stacks per CPU.
...
Minor attach-time message change.
1998-10-14 14:22:18 +00:00
4f4676e9c0
Sync to ``POWERMAC'' config.
1998-10-14 13:54:09 +00:00
773dc968ad
Remove some debugging printf
1998-10-14 13:28:47 +00:00
635d4ae57a
Fix typo.
1998-10-14 13:21:10 +00:00
c539169765
wskbd support.
1998-10-14 12:56:19 +00:00
f6f8f9b3f5
Oops, remove ite/grf.
1998-10-14 12:31:34 +00:00
461a9c9361
Add wsdisplay/wskbd.
1998-10-14 12:28:54 +00:00
ced4fd09b4
Add wsdisplay.
1998-10-14 12:27:03 +00:00
20e56a7571
Add wsdisplay (, wskbd, and wsmouse).
1998-10-14 12:21:21 +00:00
9fdd9b72df
Implement PCI tag to OpenFirmware device convert function (pcidev_to_ofdev).
1998-10-14 12:18:20 +00:00
b6e7cc68c6
akbd: wskbd support.
...
ofb: OpenFirmware generic framebuffer.
1998-10-14 12:15:10 +00:00
03de6ac37b
Physical addresses are paddr_t, not vaddr_t
1998-10-14 11:45:16 +00:00
797eea8ae5
Add a sequencer pseuso device since we have a MIDI device.
1998-10-14 11:13:14 +00:00
c65c55af6f
Disable the daft PAUSE() macro, which manages to skip all the relevant
...
code in lockmgr() most of the time. This a no doubt a case of Bad Coding Style.
1998-10-14 09:41:21 +00:00
de1d4ba9b0
Change the way uCode is loaded into board LRAM, to let it work on macppc.
1998-10-13 22:57:26 +00:00
e6c0a03f90
`ncpu != 0' doesn't make much sense when deciding what CP info to print.
1998-10-13 21:08:48 +00:00
bf7ace9074
CLKF_INTR() needs to have a MULTIPROCESSOR version.
1998-10-13 20:53:02 +00:00
e8322de657
Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
...
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
3a86ff1e67
Fix a stupid bug -- an if that was supposed to be nested but wasn't.
1998-10-13 15:14:13 +00:00
7545a59b8c
In debug message, always print controller:channel:drive
1998-10-13 15:02:41 +00:00
802248ee1c
We use MULTIPROCESSOR explicitly here, so pull in "opt_multiprocessor.h".
1998-10-13 13:37:14 +00:00
14a3acbd47
srmmu_cache_flush(): handle small (< NBPG) ranges more efficiently.
1998-10-13 13:34:06 +00:00
7d9356dcca
Fix cut-and-paste miss...
1998-10-13 13:15:29 +00:00
1e0064d5d6
EINTSTACK => EINTSTACKP
1998-10-13 12:05:44 +00:00
10788ef1be
Add a CPURESET_DELAY options which specifies the delay (in milliseconds)
...
between the "rebooting" message and the hardware reset. If set to 0, the call
to delay() is disabled. Default is 2s.
1998-10-13 11:43:50 +00:00
cee25f5a9c
Since libc is not ready for enabling weak symbol support yet, disable the
...
WEAK_ALIAS() macro for now (like cdefs.h).
1998-10-13 11:39:26 +00:00
d5e94d4fb2
Add missing `return'.
1998-10-13 11:33:36 +00:00
ffb3220169
Don't panic when pmap_remove_pv even if pa is not managed.
...
(i.e. I/O device. framebuffer etc.)
1998-10-13 11:30:47 +00:00
b373c846b4
ADB change.
1998-10-13 11:25:26 +00:00
7756c05cc4
Split ADB driver to aed (ADB event device), akbd (ADB keyboard),
...
and ams (ADB mouse). adb is a bus now. (from Colin Wood)
1998-10-13 11:21:20 +00:00
ff0134b99f
Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
...
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
da5d0a6f17
pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
...
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
39c8c94fa5
make it compile with GWETHER again.
1998-10-13 08:33:05 +00:00
dc7cfafe4c
Default to "no debugging messages" (still patchable).
1998-10-13 05:39:01 +00:00
470c2f6696
Remove space at the end of line.
1998-10-13 03:57:27 +00:00
e34aa44c14
Put back ETHERTALK_AT (but I did convert *all* code to ETHERTYPE_ATALK),
...
so if vendors (or something) used it, it is still found. Also added short
comments for each alias to explain why they are there.
1998-10-13 02:55:18 +00:00
cd7e3136ad
Use ETHERTYPE_ATALK instead of ETHERTYPE_AT. The former seems more common.
...
Our other constants also use "ATALK".
Added many new ETHERTYPE constants to sys/net/ethertypes.h, including the
ones from libpcap and tcpdump "ethertype.h" files.
1998-10-13 02:34:31 +00:00
13b8051475
Make this file compile again with -DATAPI_DEBUG_PROBE.
1998-10-13 02:09:47 +00:00
8511a94f26
Oops, USPACE does not in 13 bits.. repair and save one instruction
...
in a non-SMP kernel.
1998-10-12 22:05:17 +00:00
4e322893fa
Make the data pointer of the write_multi, write_region and write_stream
...
methods const *.
1998-10-12 22:02:43 +00:00
c27a8760b7
In switchexit(), switch to the current CPU's idle u.area.
1998-10-12 21:51:54 +00:00
dff4866141
Add offset of `cpuinfo.idle_u'.
1998-10-12 21:50:22 +00:00
5d124ce774
Move around a few PTE-manipulating macros.
1998-10-12 21:17:28 +00:00
842fbdf4d2
- add bus_space_{copy,set}_region_{1,2} support and implementation for
...
_1 and for _2 in the contiguous and interleaved case.
- while we're here, reorganize bus.h into sections, and use the defined
convenience functions everywhere.
1998-10-12 21:15:54 +00:00
83b671e23d
Make `cpcb' (current u.area) a per-CPU variable.
...
Brace some MP-only code with `#ifdef MULTIPROCESSOR'.
1998-10-12 20:56:48 +00:00
46aa11acac
Adjust include list.
1998-10-12 19:50:09 +00:00
d6748769a5
Cut down slightly by reducing md size and commenting out ext2fs
...
support.
(From Havard.Eidnes@runit.sintef.no )
1998-10-12 16:37:44 +00:00
6b858b9573
kernels for 4Mbyte main memory machines (from Havard.Eidnes@runit.sintef.no)
1998-10-12 16:36:18 +00:00
aaa8f8b183
Patch from Mark Brinicombe for arm32 config with the new ide system.
1998-10-12 16:13:03 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
37cb095897
1) Change "dectohexdec" and "hexdectodec" to "bintobcd" and
...
"bcdtobin". The old names were bogus.
2) Make the code grok the NVRAM's century field. This code is, to say
the least, poorly tested. It should make NetBSD play nicer with other
OSes that care about the century field, however.
1998-10-12 15:41:11 +00:00
6791d7f713
Make `_cpcb' (pointer to current user area) a per-CPU variable.
...
This cpuinfo field is initialized here in locore before calling bootstrap(),
since it must be valid before entering the window overflow/underflow handlers.
Fix miscalculation in the MULTIPROCESSOR version of INTR_SETUP().
1998-10-12 14:39:10 +00:00
523892012a
`cpcb' (pointer to current u.area) is now a per-CPU variable.
1998-10-12 14:32:14 +00:00
fbbc2eeedd
`cpuinfo' is now cleared in locore.
1998-10-12 14:15:13 +00:00
6fc7a5b45a
Define `sizeof(struct cpu_info)'.
1998-10-12 14:03:22 +00:00
thorpej