15f2f5d901
Take emulated button state into account before handing off mouse events.
...
Fixes part of PR 6444. Tested by Frederick Bruckman (fb@enteract.com ).
1998-11-24 08:34:37 +00:00
f917584d54
Add more delay in adb_reinit().
1998-11-24 08:26:50 +00:00
0a67f72c26
uncommented the "intrnames" definitions used by vmstat to
...
label interrupt counts.
1998-11-24 07:02:10 +00:00
28c9fd0c8c
Fix no check for negative offset in mmap.
1998-11-24 06:34:10 +00:00
3660a1e953
make sure we do not write more than 7.5k of bootblock.
1998-11-24 00:03:19 +00:00
1f676cda09
Implement the AT_READREG flag. This is needed for the CHECK POWER MODE
...
ATA command (among others).
1998-11-23 23:02:11 +00:00
48f2e0ae6c
Add a new flag to wdc_command: ATA_READREG. This will indicate that all
...
device registers should be read back into the wdc_command structure after
successfull command completion. Use this this in wdioctl() for
ATAIOCCOMMAND.
1998-11-23 23:00:26 +00:00
42d7790133
Add a new flag: ATACMD_READREG
1998-11-23 22:58:23 +00:00
4cb534cca1
added 82443BX_AGP_NOT as per kern/5847
1998-11-23 22:54:02 +00:00
f0559087e0
Changes to deal with mac serial ports having clock sources on DCD or CTS.
...
- When doing a first open, don't enable receive & status interupts before
the MD layer has had a chance to set things up.
- Enable logic to only enable DCD/CTS interupts if we are looking for/
expecting interupts on those pins. Disable otherwise.
- in zs_param, only pass up the state of ZSRR0_DCD if we have enabled
interupts on that pin.
Henry Hotz (<hotz@jpl.nasa.gov>) and Greg walsh <gwalsh@artec.com> have
tried these changes to get certain printers from hanging at boot. They
work in a 1.3.2 kernel for Greg.
1998-11-23 22:10:09 +00:00
3ebca7fd4e
regen
1998-11-23 20:49:20 +00:00
bb7d20f01a
add adaptec aha attachment
1998-11-23 20:48:34 +00:00
f2bd402051
add adaptec aha attachment.
1998-11-23 20:47:51 +00:00
1eebc10d76
add aha at isapnp?
1998-11-23 20:47:03 +00:00
6861b95582
Get rid of memset() prototype, it's not used and egcs doesn't like it.
1998-11-23 20:45:26 +00:00
84826f1771
add installboot
1998-11-23 08:16:10 +00:00
cd3e42513b
add a sparc64 installboot script. just dd the bootblk to the right part of the disk. can be improved...
1998-11-23 08:15:11 +00:00
89cad55ba4
Make rcons work, if configured, even when using serial console:
...
do rcons_connect() even if using a serial console.
identify first attached framebuffer as being `rcons' output device.
1998-11-23 04:26:15 +00:00
fdbb273f39
fix some warnings, and some not DEBUG problems.
1998-11-22 23:56:49 +00:00
701d8366f0
Define `interrupt priority levels'.
...
XXX - for now, these arbitrary identifiers; NO INTERPRETATION IS DEFINED YET
1998-11-22 23:53:24 +00:00
4cf9a921c9
Move allocsys() back to cpu_startup(). We're no longer allocating it from
...
the locked 4MB TLB entry, but it solves the problem where large memory machines
overflow the 4MB TLB entry.
1998-11-22 23:38:53 +00:00
cecf78e09d
Connect the PCMCIA bus.
1998-11-22 23:36:42 +00:00
4dd9bebb58
add two more prototypes. noted missing by mjacob.
1998-11-22 23:30:36 +00:00
e40c5c3c20
Add busses: PCMCIA, MII, ATA
1998-11-22 23:22:26 +00:00
2814b02ec8
Define STP4020 chipset driver by its nickname `nell'.
...
XXX - also define a `pcic' attribute here, so we can attach a pcmcia bus
1998-11-22 22:17:27 +00:00
5e4ad115c3
The beginnings of a driver for the Sbus <=> PCMCIA bridge chipset STP4020.
1998-11-22 22:14:35 +00:00
0f7176ff24
Remove unwanted inclusion of an isa header file.
1998-11-22 21:58:50 +00:00
0800aaa223
Move the `wdc' device into `conf/files'.
1998-11-22 21:57:47 +00:00
bc98f448b8
Turn the passed tag into "used" arguments.
1998-11-22 21:52:24 +00:00
82fe9b4f90
The last fix in trap.c missed R2.
...
And correct the size of the fault buffer while being here.
1998-11-22 21:21:32 +00:00
32dd1a1d5a
Make sure the Endpoint Descriptor gets the correct maximum packet size.
1998-11-22 20:21:22 +00:00
3bb71e68c6
ofwboot.elf is now ofwboot.
1998-11-22 17:22:50 +00:00
2f274f97e5
Don't ask the firmware to find our partition because it doesn't understand
...
NetBSD disklabels and gets horribly confused.
1998-11-22 16:21:02 +00:00
01a2fb8424
Fix typo.
1998-11-22 15:57:37 +00:00
dd377fd943
Remove erroneous duplicate lines in cdev_sw[]. Now things are lined
...
up right and RAIDframe can find it's block device again.
1998-11-22 15:51:04 +00:00
1c0cc94837
Update for INT13 support.
...
XXX We can't easily emulate this here due to the 16-bit-pointer
call interface.
1998-11-22 15:44:03 +00:00
78db9d7d95
merge ipf 3.2.10
1998-11-22 15:17:18 +00:00
c48ea35c91
include missing SYSV option header - PR kern/6479 by Urban Boquist
1998-11-22 15:00:47 +00:00
1e2b2f29f2
one more (last?) wdc_channels adaption
1998-11-22 14:55:29 +00:00
d3224441a0
merge ipf 3.2.10
1998-11-22 14:41:29 +00:00
e1244719fd
oops - forget update for wdc_channels definition change
1998-11-22 14:36:38 +00:00
a8e48ccd6e
Fix RAIDframe typo. (Reported by msaitoh@netbsd.org)
1998-11-21 23:41:13 +00:00
c312dc3f08
Avoid looping forever with cards that can only use one I/O address,
...
and specify a 0 alignment.
1998-11-21 23:38:11 +00:00
28b6542336
Fix misplaced comma...
1998-11-21 20:37:06 +00:00
491966b273
When DSI occurs and pcb_onfault != 0, registers are incorrectly restored.
...
Fix this.
1998-11-21 20:18:47 +00:00
c73add02ca
Fix some typos.
1998-11-21 18:57:09 +00:00
152d52c171
headers for new hardware support in pciide.c. from Manuel.
1998-11-21 16:06:45 +00:00
9effbbe436
some restructuring, more or less to get support for weird IDE controllers,
...
eg the Cypress ISA bridge:
-put channel mapping into the chip specific part, unify with
channel_probe() into channel_map()
-use pointer to channel data as function call argument wherever possible
instead of the channel number
-allow the "compat" channel number to differ from the per-controller
channel number - for mapping and interrupt functions
-add support for SiS5598 and Cypress 82C693 chips
Mostly done by Manuel, I only contributed to the first 2 items.
1998-11-21 15:55:31 +00:00
3e38051bc5
in wdc_softc: access the per-channel data via a pointer array instead of
...
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
1998-11-21 15:41:41 +00:00
13a8c73bb6
Flush write buffer in ZS_DELAY().
1998-11-21 14:57:59 +00:00
ender