These variables will be much more useful in the following commit.
The indentation is off to avoid future diff noise.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Now weston actually supports putting the panel at the bottom of the
screen.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes compilation error introduced by 43cea54c:
libweston/gl-renderer.c:2862:2: error: ‘for’ loop initial declarations
are only allowed in C99 mode
for (unsigned i = 0; i < ARRAY_LENGTH(swap_damage_ext_to_entrypoint);
i++) {
^
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
v2:
- Keep wl_shell code around until xdg_shell is declared stable.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This patch allow gl-renderer to accept WL_SHM_FORMAT_YUYV buffers.
This is the pixel format supported by most of the USB webcams.
v2:
- fix hsub Vs vsub inversion
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Do a minimalistic teardown at program exist.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Might be a bit of an overkill, but still. One should cleanup after
themselves.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
... over a direct eglDestroySurface call. Provides symmetry in the
create/destroy paths.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
... over a direct eglDestroySurface call. Provides symmetry in the
create/destroy paths.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Introduce the weston_platform_destroy_egl_surface() wrapper to
complement the weston_platform_create_egl_surface() one.
We'll use the former with the next patches trhoughout weston to
consistently destroy the surface as needed.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Extension is identical to the EXT one, yet we need to check for the KHR
abbreviated extension name + entry-point.
v2: s/foo/swap_damage_ext_to_entrypoint/ (Eric, Daniel)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Daniel Stone <daniels@collabora.com>
Functionally identical to the EXT version of the extension.
v2: s/foo/swap_damage_ext_to_entrypoint/ (Eric, Daniel)
v3: do the above sed for real (Frank)
[daniels: Fixed signed vs. unsigned warning.]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Daniel Stone <daniels@collabora.com>
In Fedora, bash is configured to display a desktop notification when a command
finishes (and the terminal is not focused). weston-terminal complains about it;
let's silence it.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
The X11 lock file was somewhat opaque. Into a sized array of 16
characters, we previously read 11 bytes. 61beda653b fixed the parsing of
this input to ensure that we only considered the first 10 bytes: this
has the effect of culling a LF byte at the end of the string.
This commit more explicitly NULLs the entire string before reading, and
trims trailing LF characters only.
It also adds some documentation by way of resizing pid, an explicit size
check on snprintf's return, and comments.
Verified manually that it emits lock files with a trailing \n, as Xorg
does. Also verified manually that it ignores misformatted lock files,
but accepts either \n or \0 in the trailing position.
Related Mutter issue: https://bugzilla.gnome.org/show_bug.cgi?id=774613
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
If we destroy the text_input (e.g. due to surface deactivation) whilst
the IM manager (the client holding the input_method_context resource,
usually weston-keyboard) sends an event, we can hit a segfault in
text-backend. This is because we free the text_input structure, but
don't actually clear the context->input structure even when we send the
deactivate event.
This is clearly intended to be catered for, since context->input is
always checked for NULL before we relay any events.
This is enough to fix one cause of text-test failing, but it's
ultimately error-prone until we have a no-op test-shell; there is still
a race where weston-desktop-shell can launch weston-keyboard before
text-test manages to bind zwp_text_input_manager.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Maniphest Tasks: https://phabricator.freedesktop.org/T7615
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Starting an xterm with no input device led to a crash
because weston_wm_pick_seat() was returning garbage and
weston_wm_selection_init() was trying to use the garbage.
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Patch 139fcabe7c "xwayland: Improve error
checking for strtol call" caused a regression in the X11 unix socket
lock file parsing. Before that patch, only the first 10 characters were
considered for parsing. After the patch, the newline as the 11th
character caused strtol() to stop parsing at the 10th character which
was then considered an error as not the whole input was consumed.
The effect of the regression was that no X11 lock files were ever deemed
stale, hence stale lock files were never removed. Up till now, I have
accumulated 37 lock files, and Weston complaining for each of them on
every start it cannot parse them.
Fix this by terminating the string at the expected newline character.
Also, it looks like 'pid' was being used uninitialized, risking strtol()
reading past the end of the array. This patch fixes that too.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It's currently unused, and there's actually no way to use it correctly.
The caller cannot free the menu that was created:
- the function only returns the window, not the menu
- there's no public API to destroy a menu object
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
clients/terminal.c: In function 'redraw_handler':
clients/terminal.c:213:28: warning: 'machine.unicode' may be used
uninitialized in this function [-Wmaybe-uninitialized]
struct utf8_state_machine machine;
^~~~~~~
clients/terminal.c: In function 'handle_char':
clients/terminal.c:213:28: warning: 'machine.unicode' may be used
uninitialized in this function [-Wmaybe-uninitialized]
Warning produced by GCC 5.3 and 6.1, with -O3.
'I found it weird that the compiler wouldn’t see that, so I re-checked
the code.
I think with -O3, this specific "for" is compile-time unlooped, and
utf8_next_char inlined. And there is *one* path that can keep
machine.state to utf8state_start, thus triggering the warning.
Without -O3, the function is globally tagged as “changing unicode”, so
no warning is produced.
[...]
Side note: I picked 0 as the default value, but maybe in this case
0xfffd would be better?'
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Other compositors such as mutter update the keyboard serial for both key
press and key release, unlike weston which updates it only on key press.
When dealing with popup windows which require a match in serials, if the
event that caused the popup to be shown is a key release, then the popup
would be dismissed.
This occurs when navigating gtk+ sub-menus using the keyboard.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=768017
This patch makes use of recently implemented
EGL_KHR_no_config_context extension in Mesa,
which superseeds EGL_MESA_configless_context.
See also (and the follow-up patch):
https://lists.freedesktop.org/archives/mesa-dev/2016-September/128510.html
v2:
- Extend existing infrastructure for EGL_MESA_configless_context
per suggestion from Emmanuel Gil Peyrot.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
If only the source of a viewport is set, the width and height must
be integer or the protocol mandates that the compositor generate an
error. This is because using only the source is a crop, and the
width and height become the surface size - all surface sizes must
be integer.
Weston was fixed to generate this error in bb32ccc0, however the
test app continued to use fractional co-ordinates when run as
weston-scaler -s (which only sets the viewport source)
This leaves fractional width/height for the other cases, but uses
integer for the crop-only mode. The descriptions in the help text
are still accurate with this change, but weston-scaler -s no longer
exits with an error.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
According to the xdg-shell v6 protocol a positioner object is only
complete if both the size and its anchor rectangle are set. Ensure the
weston clients do this and let weston be more strict on checking if a
client has done so.
This also fixes weston-terminal popups not showing up on gnome-shell
3.22.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
I wrote comments on which list they are used with
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: fix surface_list to layer_list, add ivi_layout_transition_set::transition_list]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
I removed unused members of ivi_layout* data
structs.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This change refactors gl_renderer_output_window_create() to separate out
window surface creation code from output common creation code.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
[Pekka: rebased and removed unused 'gr' and 'ec']
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This change adds <platform_attribs> parameter to
gl_renderer_display_create() in case we ever want to pass non-NULL.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
[Pekka: removed notes about EGLOutput]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This change modifies egl_choose_config() to accept a non-NULL but empty
<visual_id> array (i.e. n_ids == 0)
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This change renames <attribs> parameter of gl_renderer_display_create()
and gl_renderer_output_window_create() to <config_attribs> to explain
which attribs it is.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
[Pekka: remove notes about EGLOutput]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
No functional change. This patch renames gl_renderer_output_create() to
gl_renderer_output_window_create(), which is something more descriptive
of what the function does.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
No functional change. This patch only renames gl_renderer_create() to
gl_renderer_display_create(), which is something more descriptive of
what the function does.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
While gl_renderer_attach, query_buffer should be call only if the
query_buffer function exists ie when has_bind_display is true.
v2:
- Take into account Giulio's remark. Use has_bind_display viariable to test if
EGL_WL_bind_wayland_display extension is supported.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
weston-egl-ext.h has been include in compositor-xx.c file in order to
define EGL_PLATFORM_xxx_KHR extensions used by the compositors.
But in case EGL support is not enabled, all EGL related definition must
be skipped except EGL_PLATFORM_xxx_KHR that must be still defined to
allow compositor-xx.c to build.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Quentin Glidic