This was used from the crash handlers, which do not exist anymore.
Nothing calls restore, so delete the dead code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add support for using the atomic-modesetting API to apply output state.
Unlike previous series, this commit does not unflip sprites_are_broken,
until further work has been done with assign_planes to make it reliable.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Co-authored-by: Louis-Francis Ratté-Boulianne <louis-francis.ratte-boulianne@collabora.com>
Co-authored-by: Derek Foreman <derek.foreman@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
For atomic modesetting support, the mode is identified by a blob
property ID, rather than being passed inline. Add a blob_id member to
drm_mode to handle this, including refactoring mode destruction into a
helper function.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Set the atomic client cap, where it exists, and use this to discover the
plane/CRTC/connector properties we require for atomic modesetting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When leaving Weston, don't attempt to restore the previous CRTC
settings. The framebuffer may well have disappeared, and in every
likelihood, whoever gets the KMS device afterwards will be repainting
anyway.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than a smattering of error handlers, use consistent jump labels
for error paths in create_output_for_connector().
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than open-coding it ourselves, use the new apply_state helper in
drm_output_start_repaint.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Fabien DESSENNE <fabien.dessenne@st.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Split repaint into two stages, as implied by the grouped-repaint
interface: drm_output_repaint generates the repaint state only, and
drm_repaint_flush applies it.
This also moves DPMS into output state. Previously, the usual way to
DPMS off was that repaint would be called and apply its state, followed
by set_dpms being called afterwards to push the DPMS state separately.
As this happens before the repaint_flush hook, with no change to DPMS we
would set DPMS off, then immediately re-enable the output by posting the
repaint. Not ideal.
Moving DPMS application at the same time complicates this patch, but I
couldn't find a way to split it; if we keep set_dpms before begin_flush
then we break DPMS off, or if we try to move DPMS to output state before
using the repaint flush, we get stuck as the repaint hook generates an
asynchronous state update, followed immediately by set_dpms generating a
synchronous state update.
In drm_output_update_complete, the *_pending flags are cleared
before any of the pending actions are taken; this ensures that the
actions cannot recurse.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we have an unused CRTC or connector, explicitly disable it during the
end of the repaint cycle, or when we get VT-switched back in.
This commit moves state_invalid from an output property to a backend
property, as the unused CRTCs or connectors are likely not tracked by
drm_outputs. This matches the mechanics of later commits, where we move
to a global repaint-flush hook, applying the state for all outputs in
one go.
The output state_invalid flag originally provoked full changes on output
creation (via setting the flag at output enable time) and session enter.
For the new-output case, we will not have any FB in output->state_cur,
so we still take the same path in repaint as if state_invalid were set.
At session enter, we preserve the existing behaviour: as
start_repaint_loop will fail when state_invalid is set, all outputs will
be scheduled for repaint together, and state_invalid will not be cleared
until after all outputs have been repainted, inside repaint_flush.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than a more piecemeal approach at backend creation, explicitly
track connectors and CRTCs we do not intend to use, so we can ensure
they are disabled where appropriate.
When we have an updated list of connector and CRTC IDs, we add any which
are not owned by an enabled drm_output to the list. We remove them from
the list when drm_output_repaint() is called for that output, and re-add
them when the output is disabled or destroyed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Much like we already have to_drm_output and to_drm_backend.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we don't have any damage for the primary plane, then don't force a
repaint; simply reuse the old buffer we already have.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Calling switch_mode with no output or mode never makes any sense. Drop
the NULL checks.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use a real drm_plane to back the scanout plane, displacing
output->fb_{last,cur,pending} to their plane-tracked equivalents.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change the type of cursor_plane from a weston_plane (base tracking
structure) to a drm_plane (wrapper containing additional DRM-specific
details), and make it a dynamically-allocated pointer.
Using the standard drm_plane allows us to reuse code which already deals
with drm_planes, e.g. a common cleanup function.
This patch introduces a 'special plane' helper, creating a drm_plane
either from a real KMS plane when using universal planes, or a fake plane
otherwise. Without universal planes, the cursor and primary planes are
hidden from us; this helper allows us to pretend otherwise.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Helper for the pattern of checking whether or not a plane can be used on
an output during the current repaint cycle.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Track dynamic plane state (CRTC, FB, position) in separate structures,
rather than as part of the plane. This will make it easier to handle
state management later, and much more closely tracks what the kernel
does with atomic modesets.
The fb_last pointer previously used in drm_plane now becomes part of
output->state_last, and is not directly visible from the plane itself.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently this doesn't actually really do anything, but will be used in
the future to track the state for both modeset and repaint requests.
Completion of the request gives us a single request-completion path for
both pageflip and vblank events.
This merges the timing paths for scanout and plane-but-but-atomic-plane
content.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Does what it says on the box: is true when the compositor is shutting
down.
When we begin to use universal planes, we need divergent destruction
paths. With universal planes, the drm_planes are created at backend
initialisation time, and destroyed with the backend. However, without
universal planes, we create per-output drm_planes to hold the
primary/scanout and cursor planes, whose lifetime is tied to the output.
We will use the new shutting_down flag to determine if output
destruction is hot-unplug or compositor shutdown, and make a decision on
whether or not to destroy the special planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Developers with testing rigs having multiple graphics cards plugged in
often want to test things on a specific card. We have ways to choose a
card through seat assignments, but configuring that run by run is
awkward.
Add a new DRM backend option to try to open a specific device, and quit
if it fails.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
As discussed in the following thread:
https://lists.freedesktop.org/archives/wayland-devel/2017-August/034755.html
the existing plane assignment in the DRM backend is vulnerable to
accidental masking of the intended fullscreen surface. This change
adds a simple stateful memory to the plane assignment algorithm
to prevent that.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Stop suggesting to run Weston as root, it is only meant for debugging.
Instead, mention the two supported ways to run Weston on DRM and fbdev:
weston-launch helper and logind service.
Cc: "Ucan, Emre (ADITG/ESB)" <eucan@de.adit-jv.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: added forgotten "using" word.]
Change code related to key events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a test environment variable to allow disabling universal planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change all backends to set the core backend pointer early.
This is necessary for libweston core to be able to access the backend
vfuncs before the backend init function returns. Particularly,
weston_output_init() will be needing to inspect the backend vfuncs to
see if the backend has been converted to a new API. Backends that create
outputs as part of their init would fail without setting the pointer
earlier.
For consistency, all backends are modified instead of just those that
could hit an issue.
Libweston core will take care of resetting the backend pointer to NULL
in case of error since "libweston: ensure backend is not loaded twice".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
'release' is a more appropriate name because the function does not free
the underlying memory. The main reason for this is that we need the name
weston_output_destroy() for new API that actually will free also the
underlying memory.
Since the function is only used in backends and external backends are
not a thing, this does not cause libweston major version bump, even
though it does change the ABI. There is no way external users could have
successfully used this function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Move the remaining scattered setup of the fixed properties into
create_output_for_connector(). All these are already known and they
cannot change.
This helps future refactoring.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
This fixes a regression where monitor make and model would always be
advertised as "unknown" to Wayland clients. The EDID strings were parsed
at create_output_for_connector() time, but the fallback "unknown" values
were set in weston_drm_output_api::set_mode vfunc later. This made the
correct monitor info be shown in the log, but not sent to clients.
The purpose of the "unknown" assignments is to give fallback values in
case EDID is not providing them.
Fix all that by moving all setting of the make, model and serial into
create_output_for_connector(). These values cannot change afterwards
anyway. While at it, document find_and_parse_output_edid().
The ugly casts in create_output_for_connector() are required to silence
compositor warnings from ignoring const attribute. This is temporary,
and a future refactoring will get rid of the casts.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Add 'name' argument to weston_output_init(). This is much more obvious
than the assert inside weston_output_init() to ensure the caller has set
a field in weston_output first.
Now weston_output_init() will strdup() the name itself, which means we
can drop a whole bunch of strdup()s in the backends. This matches
weston_output_destroy() which was already calling free() on the name.
All backends are slightly reordered to call weston_output_init() before
accessing any fields of weston_output, except the Wayland backend which
would make it a little awkward to do it in this patch. Mind, that
weston_output_init() still does not reset the struct to zero - it is
presumed the caller has done it, since weston_output is embedded in the
backend output structs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: David Fort <contact@hardening-consulting.com>
[Daniel: document name copying]
Acked-by Daniel Stone <daniels@collabora.com>
Initialize the list in weston_output_init() instead of doing it
separately in each backend.
One would expect weston_output_init() to initialize all weston_output
members, at least those that are not NULL.
We rely on the set_size() functions to be called only once, as is
assert()'d. If set_size() becomes callable multiple times, this patch
will force them to be fixed to properly manage the mode list instead of
losing all members.
compositor-wayland.c is strange in
wayland_output_create_for_parent_output(): it first called
wayland_output_set_size() that initialized the mode list with a single
mode manufactured from width and height and set that mode as current.
Then it continued to reset the mode list and adding the list of modes
from the parent output, leaving the current mode left to point to a mode
struct that is no longer in the mode list and with a broken 'link'
element. This patch changes things such that the manufactured mode is
left in the list, and the parent mode list is added. This is probably
not quite right either.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Gets rid of the constant size char array.
While here, document the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Remove the option, because it is hard to use.
Drm connector ids are hard to reach for users,
and they can change when kernel or device tree
is modified.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: bump WESTON_DRM_BACKEND_CONFIG_VERSION]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
drm_pending_state is currently skeletal, but will be used to retain
data through begin_repaint -> assign_planes -> repaint -> repaint_flush.
The flush and cancel functions are currently identical, only freeing the
state, but they will be used for different purposes in later patches.
Specifically, the intent is to apply any pending output changes (through
PageFlip/SetCrtc, or the atomic ioctls) in flush, and only free the
state in cancel.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Retain drm_plane tracking objects for all actual DRM planes when using
universal planes, not just overlay planes. Rename uses of 'sprite' to
'plane' to make it clear that it can now be any kind of plane, not just
an overlay/sprite.
These are currently unused.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add awareness of, rather than support for, universal planes. Activate
the client cap when we start if possible, and if this is activated,
studiously ignore non-overlay planes. For now.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Co-authored-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a cache for DRM property IDs and values, and use it for the two
connector properties we currently update: DPMS and EDID.
As DRM property ID values are not stable, we need to do a name -> ID
lookup each run in order to discover the property IDs and enum values to
use for those properties. Rather than open-coding this, add a property
cache which we can use across multiple different object types.
This patch takes substantial work from the universal planes support
originally authored by Pekka Paalanen, though it has been heavily
reworked.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All planes being displayed have a framebuffer. What makes 'fb_plane'
special is that it's being displayed as the primary plane by KMS.
Previous patchsets renamed this to 'primary_plane' to match the KMS
terminology, namely the CRTC's base plane, which is controlled by
drmModeSetCrtc in the legacy API, and identified by PLANE_TYPE ==
"Primary" in the universal-plane API.
However, Weston uses 'primary_plane' internally to refer to the case
where client content is _not_ directly displayed on a plane, but
composited via the renderer, with the result of the compositing then
shown.
Rename to 'scanout_plane' as our least-ambiguous name, and document it a
bit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
This moves the single sprite creation code from create_sprites() into a
new function. The readability clean-up is small, but my intention is to
write an alternate version of create_sprites(), and sharing the single
sprite creation code is useful.
The removal code now actually removes the plane from the list.
In doing this, the gymnastics required to exact the CRTC ID the plane
was last on when making a disabling drmModeSetPlane call have been
removed; specifying the CRTC is not necessary when disabling a plane.
(The atomic API goes a step further, mandating it be zero.)
[daniels: Genericised from drm_sprite to drm_plane, moving some of the
logic back into create_sprites(), also symmetrical
drm_plane_destroy.]
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Fix a regression with VT-switching away from Weston and then back
causing drmModePageFlip() to fail with ENOSPC or EINVAL, leaving one or
more outputs not updated. The regression appeared in
47224cc931:
compositor-drm: Delete drm_backend_set_modes
Fix it by forcing a drmModeSetCrtc() on all outputs both initially
created and after VT-switch in.
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: moved state_invalid=true from create_output_for_connector() to
drm_output_enable()
Reviewed-by: Daniel Stone <daniels@collabora.com>
commit a7cba1d4cd changed the way
the cursor plane is setup. Previously it was pre-emptively set
disabled for the next frame, and that would be changed at next
frame time if the cursor plane was to be used. It was changed
to be disabled at plane assignment time.
We disable the use of planes entirely by setting disable_planes to
a non-zero value, which bypasses all calls to assign_planes - so
if the plane was set-up in the previous frame it will retain its
state post-disable.
This leads to desktop zoom leaving the cursor plane in place when
it sets disable_planes.
This patch clears any stale cursor plane state from the redraw
handler if disable_planes is set so drm_output_set_cursor()
will do the right thing.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reported-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
We make the differentiation where planes are an abstract framebuffer
with a position within a CRTC/output, and sprites are special cases of
planes that are neither the primary (base/framebuffer) nor cursor plane.
drm_sprite, OTOH, contains nothing that's actually specific to sprites,
and we end up duplicating a lot of code to deal with them, especially
when we come to use an entirely plane-based interface with atomic
modesetting.
Rename drm_sprite to drm_plane, to reflect that it's actually generic.
No functional changes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: dropped the removal of an unrelated comment]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
page_flip_pending is only be set when do a pageflip to a newly-rendered
buffer; if the flag is not set, we have landed in the start_repaint_loop
path where the vblank query fails, and thus we must pageflip to the same
buffer.
This test was not sufficient for what it was supposed to guard:
releasing framebuffers back. When using client-supplied framebuffers, it
is possible to reuse the same buffer multiple times, and we would send a
framebuffer-release event too early.
However, since we have a properly reference-counted drm_fb now, we can
just drop this test, and rely on the reference counting to prevent
too-early release of client framebuffers.
page_flip_pending now becomes exactly what the name suggests: a flag
which indicates whether or not we are expecting a pageflip event. Add
asserts here to verify that we never receive a pageflip event we weren't
expecting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
vblank_pending is currently a bool, which is reset on every vblank
requests (i.e. sprite pageflip). This can occur more than once per
frame, so turn it into a callback, so we only fire frame-done when we've
collected all the events.
This fixes unexpected behaviour when multiple views per output have been
promoted to DRM planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previously, framebuffers were stored as fb_current and fb_pending.
In this scheme, current was the last buffer that the kernel/hardware had
acknowledged displaying: a framebuffer would be created, set as
fb_pending, and Weston would request the kernel display it. When the
kernel signals that the request was completed and the hardware had made
the buffer current (i.e. page_flip_handler / vblank_handler), we would
unreference the old fb_current, and promote fb_pending to fb_current.
In other words, the view is 'which buffer has turned to light?'.
This patch changes them to a tristate of fb_last, fb_current and
fb_pending, based around the kernel's view of the current state.
fb_pending is used purely as a staging area for request construction;
when the kernel acknowledges a request (e.g. drmModePageFlip returns 0),
the previous buffer is moved to fb_last, and this new buffer to
fb_current. When the kernel signals that the request has completed and
the hardware has made the buffer current, we simply unreference and
clear fb_last, without touching fb_current/fb_pending.
The view here is now 'which state is current in the kernel?'.
As all state changes are incremental on the last state submitted to the
kernel, even if the hardware has not yet been able to make it current,
this simplifies state tracking: all state submissions will always be
relative to fb_current, rather than the previous
(fb_pending) ? fb_pending : fb_current.
The use of fb_pending is strictly bounded between a repaint cycle
(including a grouped set of repaints) beginning, and those repaints
being flushed to the kernel.
fb_current will always be valid between an output's first repaint
flush, and when a disable/destroy request has been processed. For a
plane, it will be valid when a repaint cycle enabling that plane has
been flushed, and when a repaint cycle disabling that plane has been
flushed.
fb_last is only present when a repaint request for the output/plane has
been submitted, but not yet completed by the hardware.
This is the same set of constructs which will be used for storing
plane/output state objects in future patches.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We implement v2 so use that instead of the DRM_EVENT_CONTEXT_VERSION
macro.
The latter defines the version of the drmEventContext struct declared in
the header [used in the current build] and can be 2, 3 or even 1000.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of setting state members directly in the drm_output_render
functions (to paint using Pixman or GL), just return a drm_fb, and let
the core function place it in state.
This brings damage handling in line with repaint state, so we do not
clear damage if repaint fails.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Call drm_output_render unconditionally, doing an early exit if we're
already rendering a client buffer on the primary plane.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
'next' is used as a framebuffer which has either been rendered but not
had a configuration request (pageflip or CRTC set) applied to it, or
when for a framebuffer that has had configuration requested but not
applied (delayed pageflip where the event has not been applied).
'current' is used as the last framebuffer for which we know
configuration has been fully applied, i.e. CRTC set executed or pageflip
requested and event received.
Rename these members to fb_current and fb_pending, doing some small
reordering of drm_output whilst in the vicinity.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now that we have better types in drm_fb, use it for cursor buffers as
well. This gives us easier refcounting for our cursors, as well as a
unified buffer-destruction path.
Currently this makes no difference, as the KMS legacy cursor update API
uses GEM names directly, and never touches DRM FBs. However, the cursor
plane becomes a regular KMS plane under atomic, at which point we
require DRM FBs.
Take the opportunity to move to drm_fb ahead of time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Sometimes we need to duplicate an existing drm_fb, e.g. when
pageflipping to the same buffer to kickstart the repaint loop. To handle
situations like these, and simplify resource management for dumb and
cursor buffers, refcount drm_fb.
drm_fb_get_from_bo has a path where it may reuse a drm_fb, if the BO has
been imported and not released yet. As drm_fb_unref now relies on actual
refcounting (backed up by asserts), we add a balancing drm_fb_ref() to
the path where we return a reused drm_fb.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We only need it for the GBM surface the FB was originally created
against; a mismatch here is very bad indeed, so no reason to pass it in
explictly every time rather than store it.
Following patches change drm_fb to be explicitly reference counted; in
order to reduce churn, rename drm_output_release_fb to drm_fb_unref
whilst changing its call signature here, even though it does not yet
actually perform reference counting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The drm_fb destroy callback to mostly the same thing regardless of
whether the buffer is a dumb buffer or gbm buffer. This patch refactors
the common parts into a new function that can be called for both cases.
[daniels: Rebased on top of fb->fd changes, cosmetic changes.]
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This uses the new pixel-format helpers, so we can also replace depth/bpp
with these.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalaneN@collabora.co.uk>
Rather than magically trying to infer what the buffer is and what we
should do with it when we go to destroy it, add an explicit type
instead.
In doing so, the test for dumb images (destroying them, but only if
they're not the 'live' ones) is removed. This was dead code, as the only
path which could cause us to shuffle images is drm_output_switch_mode.
This calls drm_output_release_fb before the images are reallocated in
drm_output_fini_pixman / drm_output_init_pixman, with the reallocation
unconditionally destroying the images, so can never be hit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Make drm_output_set_cursor more deterministic, by calculating more state
and performing more plane manipulation, inside
drm_output_prepare_cursor_view.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Implement new repaint_begin and repaint_flush hooks inside
weston_backend, allowing backends to gang together repaints which
trigger at the same time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
On startup, we cannot lock on to the repaint timer because it is unknown
to us. We deal with this by claiming that the moment of entry into the
repaint loop is the moment a frame returned, causing finish_frame to
delay our initial repaint to (refresh_time - repaint_delay), typically
around 9ms of utterly wasted time.
Add an explicit stamp == NULL, to determine that we are just beginning
our repaint loop, that the timings are in fact totally invalid, and that
it would be beneficial to repaint the output immediately. This will only
trigger when the display had previously been disabled or the previous
state is unknown, e.g. at startup, or coming back from DPMS off.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Weston will not repaint until previous update has been acked by a
pageflip event coming from the drm driver. However, some buggy drivers
won’t return those events or will stop sending them at some point and
Weston output repaints will completely freeze. To ease developers’ task
in testing their drivers, this patch makes compositor-drm use a timer
to detect cases where those pageflip events stop coming.
This timeout implementation is software only and includes basic
features usually found in a watchdog. We simply exit Weston gracefully
with a log message and an exit code when the timout is reached.
The timeout value can be set via weston.ini by adding a
pageflip-timeout=<MILLISECONDS> entry under [core]
section. Setting it to 0 disables the timeout feature.
v2:
- Made sure we would get both the pageflip and the vblank events before
stopping the timer.
- Reordered the error and success cases in
drm_output_pageflip_timer_create() to be more in line with the rest
of the code.
v3:
- Reordered (de)arming of the timer with the code around it to avoid it
being rearmed before the current dearming.
- Return the proper value for the dispatcher in the pageflip_timeout
callback.
- Also display the output name in case the timer fires.
v4:
- Reordered a forgotten timer rearming after its drmModePageFlip().
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=83884
Signed-off-by: Frederic Plourde <frederic.plourde at collabora.co.uk>
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Don't import buffers which span multiple outputs, short-cut any attempt
to import SHM buffers, and ignore buffers with a global alpha set.
I'm not convinced all of these conditions entirely make sense, but this
at least makes them equally nonsensical.
Differential Revision: https://phabricator.freedesktop.org/D1414
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
And properly deconstruct it in drm_output_destroy.
Might be useful for finding out which modes are supported
before even setting them, in case we want to extend the
modesetting API.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Previously in picking CRTC -> encoder -> connecting routing, we went for
the first triplet we found which claimed to work.
Preserving the existing routing means that startup will be faster: on a
multi-head system, changing the routing implies disabling both CRTCs,
then re-enabling them with a new configuration, which may involve
retraining links etc.
Furthermore, the existing routing may be set for a reason; each
CRTC/encoder is not necessarily as capable as the other, so the routing
may be configured to stay within such device limits.
Try where possible to respect the routing we pick up, rather than
blithely configuring our own.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Given that we can have render-only devices, or vgem in a class of its
own, ignore any non-KMS devices in compositor-drm's device selection.
For x86 platforms, this is mostly a non-issue since we look at the udev
boot_vga issue, but other architectures which lack this, and have
multiple KMS devices present, will hit this.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Thierry Reding <treding@nvidia.com>
Reported-by: Daniel Vetter <daniel.vetter@intel.com>
Remove the last usage of connector_allocator, which was to check for
displays which have been hot-unplugged, and replace it with an array
which doesn't rely on the connector IDs remaining below 32 (or 64).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
Rather than using connector_allocator to determine whether an output is
newly connected or not, use a list walk across all outputs instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
crtc_allocator was used as a bitmask of CRTC IDs, so we didn't try to
use the same CRTC for multiple outputs. Unfortunately, this only works
to the extent that CRTC object IDs fit within the bitmask; though they
were previously, they are not guaranteed to be under 32 or even 64.
Replace the only use of crtc_allocator with a list walk across outputs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reported-by: Peter Senna Tschudin <peter.senna@collabora.com>
The connector option is a part of drm_backend struct.
Therefore, it is not needed to pass it as an argument
to create_outputs function.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
weston can be started with --connector option to be initialized
with a particular output. But in the update_outputs this option
is not considered and output is created for all the available
connectors. This patch fixes this issue by considering
the option for connectors in the update_outputs.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
This patch checks the attribute flags on incoming dmabufs and refuses to
put them overlays if they have any of the flags set (currently:
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_Y_INVERT,
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_INTERLACED and
ZWP_LINUX_BUFFER_PARAMS_V1_FLAGS_BOTTOM_FIRST), instead defaulting to
the gl-renderer which can handle some of the flags.
This check should be superceded by buffer transforms, when they become
available.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It got lost during the porting to the config API.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents loading a backend as a simple module. This will avoid
messing up with backends when we will introduce libweston common
modules.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
As an option, allow to specify a mode (from the configuration file) by
its refresh rate.
Example of valid syntax:
- "mode=1920x1080" Select a 1920x1080 mode, refresh rate undefined.
- "mode=1920x1080@60" Select the (or one of the) 1920x1080 60 Hz mode.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Try to harmonise the various plane-import paths a little bit, starting
with reshuffling and commenting the conditions to do so.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1413
This always changes the state to ACTIVE when we enter the session,
whereas the previous implementation preserved the state (i.e. if state
was SLEEPING on exit, it would be restored to SLEEPING, but also with a
repaint). This seems more helpful behaviour, however: if you enter a
session, it's probably in order to interact with it.
Differential Revision: https://phabricator.freedesktop.org/D1482
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Even if we do have a framebuffer matching the mode, we immediately
schedule a repaint, meaning we either do work for no reason, or show
stale content before we bring up the new content.
Delete this and just let repaint deal with it.
Differential Revision: https://phabricator.freedesktop.org/D1481
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
This will be used so we can later determine the compatibility of drm_fbs
without needing to introspect external state.
Differential Revision: https://phabricator.freedesktop.org/D1487
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
This makes it sign-compatible with weston_output->{width,height}.
Differential Revision: https://phabricator.freedesktop.org/D1486
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Everyone else uses fb->fd rather than pulling the FD back out of GBM.
Use that in the destroy callback too.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1406
No functional change.
Differential Revision: https://phabricator.freedesktop.org/D1484
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
No need to walk the CRTC list every time looking for CRTC indices, when we
already have the CRTC index stashed away. Taking the plane as an argument
also simplifies things a little for callers, and future-proofs for a
potential future KMS API which passes a list of supported CRTC IDs rather
than a bitmask of supported CRTC indices.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1407
Clarify the difference between crtc_id (DRM object) and pipe (index into
drmModeRes->crtcs array, possible_crtcs bitmask).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1405
This change adds <platform_attribs> parameter to
gl_renderer_display_create() in case we ever want to pass non-NULL.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
[Pekka: removed notes about EGLOutput]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
No functional change. This patch renames gl_renderer_output_create() to
gl_renderer_output_window_create(), which is something more descriptive
of what the function does.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
No functional change. This patch only renames gl_renderer_create() to
gl_renderer_display_create(), which is something more descriptive of
what the function does.
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
As to what is done for gl-renderer.c, weston-egl-ext.h should be
include in compositor-drm.c, compositor-x11.c and compositor-wayland.c.
This fix building issue with GPU that does not have EGL_PLATFORM_xxx_KHR
in their extension header file eglext.h.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is a complete port of the DRM backend that uses
the recently added output handling API for output
configuration.
Output can be configured at runtime by passing the
necessary configuration parameters, which can be
filled in manually or obtained from the configuration
file using previously added functionality. It is
required that the scale and transform values are set
using the previously added functionality.
After everything has been set, output needs to be
enabled manually using weston_output_enable().
v2:
- Added missing drmModeFreeCrtc() to drm_output_enable()
cleanup list in case of failure.
- Split drm_backend_disable() into drm_backend_deinit()
to accomodate for changes in the first patch in the
series. Moved restoring original crtc to
drm_output_destroy().
v3:
- Moved origcrtc allocation to drm_output_set_mode().
- Swapped connector_get_current_mode() and
drm_output_add_mode() calls in drm_output_set_mode()
to match current weston.
- Moved crtc_allocator and connector_allocator update
from drm_output_enable() to create_output_for_connector()
to avoid problems when more than one monitor is connected
at startup and crtc allocator wasn't updated before
create_output_for_connector() was called second time,
resulting in one screen being turned off.
- Moved crtc_allocator and connector_allocator update from
drm_output_deinit() to drm_output_destroy(), as it
should not be called on drm_output_disable().
- Use weston_compositor_add_pending_output().
- Bump weston_drm_backend_config version to 2.
v4:
- Reset output->original_crtc to NULL if drm_output_set_mode()
fails.
- Remove unneeded log message when disabling an output when a
pageflip is pending.
- Document that create_output_for_connector() takes ownership
of the connector.
- Free the connector if create output conditionals are not met
in create_outputs() and update_outputs().
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Valgrind noticed that we send uninit data to drmModeAddFB2. While
the kernel should never read this (because of the plane format),
it's probably still nicer to zero the data before we send it.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.
v2:
- Remove unneeded cast
- Remove unneeded line breaks
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When there are no outputs left after a hotplug event, weston
will terminate. This isn't desired when trying to get weston
to work with zero outputs.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Returning an error when there are no connectors results in
weston terminating after that. That's not expected when
trying to get weston to start with zero drm outputs.
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This clarifies what is supposed to be the libweston code.
v2: screen-share.c is already in compositor/ instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
