These instructions have implicit reads from p0, so we don't want
them in helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-6-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-5-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-4-tsimpson@quicinc.com>
Add DisasContext arg to gen_log_reg_write_pair also
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-3-tsimpson@quicinc.com>
The following instructions are added
J2_callrh
J2_junprh
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-9-tsimpson@quicinc.com>
The following instructions are added
V6_vasrvuhubrndsat
V6_vasrvuhubsat
V6_vasrvwuhrndsat
V6_vasrvwuhsat
V6_vassign_tmp
V6_vcombine_tmp
V6_vmpyuhvs
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-7-tsimpson@quicinc.com>
The following instructions are added
V6_v6mpyvubs10_vxx
V6_v6mpyhubs10_vxx
V6_v6mpyvubs10
V6_v6mpyhubs10
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-5-tsimpson@quicinc.com>
The following instructions are added
L2_loadw_aq
L4_loadd_aq
R6_release_at_vi
R6_release_st_vi
S2_storew_rl_at_vi
S4_stored_rl_at_vi
S2_storew_rl_st_vi
S4_stored_rl_st_vi
The release instructions are nop's in qemu. The others behave as
loads/stores.
The encodings for these instructions changed some "don't care" bits
L2_loadw_locked
L4_loadd_locked
S2_storew_locked
S4_stored_locked
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-3-tsimpson@quicinc.com>
Add support for the ELF flags
Move target/hexagon/cpu.[ch] to be v73
Change the compiler flag used by "make check-tcg"
The decbin instruction is removed in Hexagon v73, so check the
version before trying to compile the instruction.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-2-tsimpson@quicinc.com>
Convert away from the old interface with the implicit
MemOp argument. Importantly, this removes some incorrect
casts generated by idef-parser's gen_load().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230502135741.1158035-4-richard.henderson@linaro.org>
Most of these are not modelled in QEMU, so save the overhead of
calling a helper.
The only exception is dczeroa. It assigns to hex_dczero_addr, which
is handled during packet commit.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230410202402.2856852-1-tsimpson@quicinc.com>
The slot variable in helpers was only passed to log_reg_write function
where the argument is unused.
- Remove declaration from generated helper functions
- Remove slot argument from log_reg_write
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407204521.357244-1-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230405164211.30015-3-tsimpson@quicinc.com>
The following instructions are overriden
S2_ct0 Count trailing zeros
S2_ct1 Count trailing ones
S2_ct0p Count trailing zeros (register pair)
S2_ct1p Count trailing ones (register pair)
These instructions are not handled by idef-parser because the
imported semantics uses bit-reverse. However, they are
straightforward to implement in TCG with tcg_gen_ctzi_*
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405164211.30015-1-tsimpson@quicinc.com>
Reducing the number of arguments reduces the overhead of the helper
call
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405164211.30015-2-tsimpson@quicinc.com>
Remove the following macros (remnants of the old generator design)
READ_REG
READ_PREG
WRITE_RREG
WRITE_PREG
Modify macros that rely on the above
The following are unused
READ_IREG
fGET_FIELD
fSET_FIELD
fREAD_P3
fREAD_NPC
fWRITE_LC0
fWRITE_LC1
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405183048.147767-1-tsimpson@quicinc.com>
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-3-quic_mliebel@quicinc.com>
Replace python 2 format string with f-strings
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-2-quic_mliebel@quicinc.com>
When there is a conditional change of flow or an endloop instruction, we
preload HEX_REG_PC with ctx->next_PC at gen_start_packet(). Nonetheless,
we still generate TCG code to do this update again at gen_goto_tb() when
the condition for the COF is not met, thus producing redundant
instructions. This can be seen with the following packet:
0x004002e4: 0x5c20d000 { if (!P0) jump:t PC+0 }
Which generates this TCG code:
---- 004002e4
-> mov_i32 pc,$0x4002e8
and_i32 loc9,p0,$0x1
mov_i32 branch_taken,loc9
add_i32 pkt_cnt,pkt_cnt,$0x2
add_i32 insn_cnt,insn_cnt,$0x2
brcond_i32 branch_taken,$0x0,ne,$L1
goto_tb $0x0
mov_i32 pc,$0x4002e4
exit_tb $0x7fb0c36e5200
set_label $L1
goto_tb $0x1
-> mov_i32 pc,$0x4002e8
exit_tb $0x7fb0c36e5201
set_label $L0
exit_tb $0x7fb0c36e5203
Note that even after optimizations, the redundant PC update is still
present:
---- 004002e4
-> mov_i32 pc,$0x4002e8 sync: 0 dead: 0 1 pref=0xffff
mov_i32 branch_taken,$0x1 sync: 0 dead: 0 1 pref=0xffff
add_i32 pkt_cnt,pkt_cnt,$0x2 sync: 0 dead: 0 1 pref=0xffff
add_i32 insn_cnt,insn_cnt,$0x2 sync: 0 dead: 0 1 2 pref=0xffff
goto_tb $0x1
-> mov_i32 pc,$0x4002e8 sync: 0 dead: 0 1 pref=0xffff
exit_tb $0x7fb0c36e5201
set_label $L0
exit_tb $0x7fb0c36e5203
With this patch, the second redundant update is properly discarded.
Note that we need the additional "move_to_pc" flag instead of just
avoiding the update whenever `dest == ctx->next_PC`, as that could
potentially skip updates from a COF with met condition, whose
ctx->branch_dest just happens to be equal to ctx->next_PC.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <fc059153c3f0526d97b7f13450c02b276b0908e1.1679519341.git.quic_mathbern@quicinc.com>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230306175230.7110-7-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
Hexagon's idef-parser machinery uses some bison features that are not
available at older versions. The most preeminent example (as it can
be used as a sentinel) is "%define parse.error verbose". This was
introduced in version 3.0 of the tool, which is able to compile
qemu-hexagon just fine. However, compilation fails with the previous
minor bison release, v2.7. So let's assert the minimum version at
meson.build to give a more comprehensive error message for those trying
to compile QEMU.
[1]: https://www.gnu.org/software/bison/manual/html_node/_0025define-Summary.html#index-_0025define-parse_002eerror
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alessandro Di Federico <ale@rev.ng>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <a6763f9f7b89ea310ab86f9a2b311a05254a1acd.1675779233.git.quic_mathbern@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The following improvements are made for predicated HVX instructions
During gen_commit_hvx, unconditionally move the "new" value into
the dest
Don't set slot_cancelled
Remove runtime bookkeeping of which registers were updated
Reduce the cases where gen_log_vreg_write[_pair] is called
It's only needed for special operands VxxV and VyV
Remove gen_log_qreg_write
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-15-tsimpson@quicinc.com>
We only need to track slot for predicated stores and predicated HVX
instructions.
Add arguments to the probe helper functions to indicate if the slot
is predicated.
Here is a simple example of the differences in the TCG code generated:
IN:
0x00400094: 0xf900c102 { if (P0) R2 = and(R0,R1) }
BEFORE
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 new_r2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
mov_i32 r2,new_r2
AFTER
---- 00400094
mov_i32 new_r2,r2
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 new_r2,tmp0
br $L2
set_label $L1
set_label $L2
mov_i32 r2,new_r2
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-14-tsimpson@quicinc.com>
We assign the instruction destination register to hex_new_value[num]
instead of a TCG temp that gets copied back to hex_new_value[num].
We introduce new functions get_result_gpr[_pair] to facilitate getting
the proper destination register.
Since we preload hex_new_value for predicated instructions, we don't
need the check for slot_cancelled. So, we call gen_log_reg_write instead.
We update the helper function generation and gen_tcg.h to maintain the
disable-hexagon-idef-parser configuration.
Here is a simple example of the differences in the TCG code generated:
IN:
0x00400094: 0xf900c102 { if (P0) R2 = and(R0,R1) }
BEFORE
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
mov_i32 loc2,$0x0
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 loc2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
and_i32 tmp0,slot_cancelled,$0x8
movcond_i32 new_r2,tmp0,$0x0,loc2,new_r2,eq
mov_i32 r2,new_r2
AFTER
---- 00400094
mov_i32 slot_cancelled,$0x0
mov_i32 new_r2,r2
and_i32 tmp0,p0,$0x1
brcond_i32 tmp0,$0x0,eq,$L1
and_i32 tmp0,r0,r1
mov_i32 new_r2,tmp0
br $L2
set_label $L1
or_i32 slot_cancelled,slot_cancelled,$0x8
set_label $L2
mov_i32 r2,new_r2
We'll remove the unnecessary manipulation of slot_cancelled in a
subsequent patch.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-13-tsimpson@quicinc.com>
The F2_sffms instruction [r0 -= sfmpy(r1, r2)] doesn't properly
handle -0. Previously we would negate the input operand by subtracting
from zero. Instead, we negate by changing the sign bit.
Test case added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-12-tsimpson@quicinc.com>
Extend the analyze_<tag> functions for HVX vector and predicate writes
Remove calls to ctx_log_vreg_write[_pair] from gen_tcg_funcs.py
During gen_start_packet, reload the predicated HVX registers into
fugure_VRegs and tmp_VRegs
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-8-tsimpson@quicinc.com>
The pkt_has_store_s1 field in CPUHexagonState is only needed in generated
helpers for scalar load instructions. See check_noshuf and mem_load[1248]
in op_helper.c.
We add logic in gen_analyze_funcs.py to set need_pkt_has_store_s1 in
DisasContext when it is needed at runtime.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-7-tsimpson@quicinc.com>
We create a new generator that creates an analyze_<tag> function for
each instruction. Currently, these functions record the writes to
R, P, and C registers by calling ctx_log_reg_write[_pair] or
ctx_log_pred_write.
During gen_start_packet, we invoke the analyze_<tag> function for
each instruction in the packet, and we mark the implicit register
and predicate writes.
Doing the analysis up front has several advantages
- We remove calls to ctx_log_* from gen_tcg_funcs.py and genptr.c
- After the analysis is performed, we can initialize hex_new_value
for each of the predicated assignments rather than during TCG
generation for the instructions
- This is a stepping stone for future work where the analysis will
include the set of registers that are read. In cases where
the packet doesn't have an overlap between the registers that are
written and registers that are read, we can avoid the intermediate
step of writing to hex_new_value. Note that other checks will also
be needed (e.g., no instructions can raise an exception).
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-6-tsimpson@quicinc.com>
These instructions perform a deallocframe+return (jumpr r31)
Add overrides for
L4_return
SL2_return
L4_return_t
L4_return_f
L4_return_tnew_pt
L4_return_fnew_pt
L4_return_tnew_pnt
L4_return_fnew_pnt
SL2_return_t
SL2_return_f
SL2_return_tnew
SL2_return_fnew
This patch eliminates the last helper that uses write_new_pc, so we
remove it from op_helper.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-5-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-4-tsimpson@quicinc.com>
Add overrides for
J2_callr
J2_callrt
J2_callrf
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-3-tsimpson@quicinc.com>
Removes code paths used by COF instructions, which are no longer
processed by idef-parser.
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230131223133.8592-1-anjo@rev.ng>
Merge mov with andi.
Suggested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230306225724.2105263-1-richard.henderson@linaro.org>
The --disable-hexagon-idef-parser configuration was broken by this patch
2feacf60c23ba6 (target/hexagon: Drop tcg_temp_free from C code)
That config is not tested by CI
Fix is simple: Mark a few TCGv variables as unused
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230306172515.346813-1-tsimpson@quicinc.com>
We already have a temporary, res, which we can use for the intermediate
shift result. Simplify the constant to -1 instead of 0xf*f.
This was the last use of gen_tmp_value, so remove it.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The allocation is immediately followed by either tcg_gen_mov_i32
or gen_read_preg (which contains tcg_gen_mov_i32), so the zero
initialization is immediately discarded.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The allocation is immediately followed by tcg_gen_mov_i32,
so the initial assignment of zero is discarded.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The GET_USR_FIELD macro initializes the output, so the initial assignment
of zero is discarded. This is the only use of get_tmp_value outside of
parser-helper.c, so make it static.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename from gen_tmp_value_from_imm to match gen_constant vs gen_tmp.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
This removes gen_rvalue_free, gen_rvalue_free_manual and
free_variables, whose only purpose was to emit tcg_temp_free.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now equivalent to gen_tmp.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new_* is now identical, use those.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230227135202.9710-25-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Changes to standalone programs dropped, because these intentionally
don't use qemu/osdep.h:
target/hexagon/gen_dectree_import.c
target/hexagon/gen_semantics.c
target/hexagon/idef-parser/idef-parser.h
target/hexagon/idef-parser/parser-helpers.c
target/hexagon/idef-parser/parser-helpers.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-14-armbru@redhat.com>
Some registers are defined to have immutable bits, this commit
will implement that behavior.
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230105102349.2181856-1-quic_mliebel@quicinc.com>
This patch manually suppresses a warning for an unused variable
(yynerrs) emitted by bison.
This warning has been triggered for the first time by clang 15.
This patch also disables `-Wextra`, which is not usually adopted in
QEMU. However, clang 15 triggers the warning fixed in this patch even in
absence of `-Wextra`.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221221155327.1504117-1-ale@rev.ng>
The patch renames the identifier of the 32bit register
HEX_REG_P3_0 to HEX_REG_P3_0_ALIASED.
This change is to intended to provide some warning that
HEX_REG_P3_0 is an aliased register which has multiple
representations in CPU state and therefore might require
special handling in some contexts. The hope is to prevent
accidental misuse of this register e.g the issue reported
for the signals tests failure [here][1].
[1]: https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01102.html
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221229092006.10709-3-quic_mthiyaga@quicinc.com>
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmOc2BEACgkQewJE+xLe
RCKqFwf/U/uWaQiF59OXyLHj9PR/bTf7PmZL12g8MTrntzmtIpRiTQb7ajJaLwyn
TcCG9j9Ss6kWBq+LH5TBvstnSN9/3qEgnj2b26y6EAn85mSh6fai4foUPjXFUy7m
2Of0kuc2WKmwxN9C2iw6Hm6pbL3FSnYzKtBuSFzYyAIS0doLFT97zE97XnBtTQ4C
49JdNgQW9CKt7cCpKTcQA4N3ZO8LdARdvOtTShX1++qd4Trm0haTGRdaygSrTlS7
Eeqs4nbakKEE6VH2iltPGKX+KHbMCf2ZW7lefxHi+EuzE0DBIVoM64UnalyFfcSU
hVMGF15HgAIAjecim0Y4AbPB/zVlEw==
=PC9+
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20221216-1' of https://github.com/quic/qemu into staging
1)
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
# gpg: Signature made Fri 16 Dec 2022 20:41:53 GMT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20221216-1' of https://github.com/quic/qemu: (21 commits)
target/hexagon: import additional tests
target/hexagon: call idef-parser functions
target/hexagon: import parser for idef-parser
target/hexagon: import lexer for idef-parser
target/hexagon: prepare input for the idef-parser
target/hexagon: introduce new helper functions
target/hexagon: make helper functions non-static
target/hexagon: make slot number an unsigned
target/hexagon: import README for idef-parser
target/hexagon: update MAINTAINERS for idef-parser
Hexagon (target/hexagon) Use direct block chaining for tight loops
Hexagon (target/hexagon) Use direct block chaining for direct jump/branch
Hexagon (target/hexagon) Add overrides for various forms of jump
Hexagon (target/hexagon) Add overrides for compound compare and jump
Hexagon (target/hexagon) Add overrides for direct call instructions
Hexagon (target/hexagon) Remove next_PC from runtime state
Hexagon (target/hexagon) Remove PC from the runtime state
Hexagon (target/hexagon) Only use branch_taken when packet has multi cof
Hexagon (target/hexagon) Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
Hexagon (target/hexagon) Fix predicated assignment to .tmp and .cur
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend gen_tcg_funcs.py in order to emit calls to the functions emitted
by the idef-parser, if available.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-11-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-10-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-9-anjo@rev.ng>
Introduce infrastructure necessary to produce a file suitable for being
parsed by the idef-parser. A build option is also added to fully disable
the output of idef-parser, which is useful for debugging.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-8-anjo@rev.ng>
These helpers will be employed by the idef-parser generated code, to
correctly implement instruction semantics. "Helper" functions, in the
context of this patch, refers to functions which provide a manual TCG
implementation of certain features.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Niccolò Izzo <nizzo@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-6-anjo@rev.ng>
Make certain helper functions non-static, making them available outside
genptr.c. These functions are required by code generated by the
idef-parser.
This commit also makes some functions in op_helper.c non-static in order
to avoid having them marked as unused when using the idef-parser
generated code.
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-5-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Paolo Montesel <babush@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-4-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-3-anjo@rev.ng>
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Hexagon inner loops end with the endloop0 instruction
To go back to the beginning of the loop, this instructions writes to PC
from register SA0 (start address 0). To use direct block chaining, we
have to assign PC with a constant value. So, we specialize the code
generation when the start of the translation block is equal to SA0.
When this is the case, we defer the compare/branch from endloop0 to
gen_end_tb. When this is done, we can assign the start address of the TB
to PC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-12-tsimpson@quicinc.com>
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Recall that Hexagon allows packets with multiple jumps where only the
first one with a true predicate will actually jump. We can use
tcg_gen_goto_tb/tcg_gen_exit_tb when the packet contains a single
PC-relative branch or jump. If not, we use tcg_gen_lookup_and_goto_ptr.
We add the following to DisasContext in order to delay the branching
until the end of packet commit (in gen_end_tb)
branch_cond
The TCGCond condition under which the branch is taken
When branch_cond == TCG_COND_NEVER, there isn't a single
direct branch in this packet.
When branch_cond != TCG_COND_ALWAYS, the value is in
hex_branch_taken
branch_dest
The destination of the branch
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-11-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-10-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-9-tsimpson@quicinc.com>
The imported files don't properly mark all CONDEXEC instructions, so
we add some logic to hex_common.py to add the attribute.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-7-tsimpson@quicinc.com>
Add pc field to Packet structure
For helpers that need PC, pass an extra argument
Remove slot arg from conditional jump helpers
On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-6-tsimpson@quicinc.com>
When a packet has more than one change-of-flow instruction, only the first
one to branch is considered. We use the branch_taken variable to keep
track of this.
However, when there is a single cof instruction, we don't need the same
amount of bookkeeping.
We add the pkt_has_multi_cof member to the Packet structure, and pass this
information to the needed functions.
When there is a generated helper function with cof, the generator will
pass this pkt_has_multi_cof as a runtime value.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-5-tsimpson@quicinc.com>
These instructions will not be generated by idef-parser, so we override
them manually.
Test cases added to tests/tcg/hexagon/usr.c
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221108162906.3166-4-tsimpson@quicinc.com>
Here are example instructions with a predicated .tmp/.cur assignment
if (p1) v12.tmp = vmem(r7 + #0)
if (p0) v12.cur = vmem(r9 + #0)
The .tmp/.cur indicates that references to v12 in the same packet
take the result of the load. However, when the predicate is false,
the value at the start of the packet should be used. After the packet
commits, the .tmp value is dropped, but the .cur value is maintained.
To fix this bug, we preload the original value from the HVX register
into the temporary used for the result.
Test cases added to tests/tcg/hexagon/hvx_misc.c
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-3-tsimpson@quicinc.com>
This enables us to reduce the number of parameters to many functions
In particular, the generated functions previously took all 3 as arguments
Not only does this simplify the code, it improves the translation time
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-2-tsimpson@quicinc.com>
Convert the hexagon CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20221124115023.2437291-6-peter.maydell@linaro.org
Bug fix in gen_tcg_funcs.py
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmM7JS4ACgkQewJE+xLe
RCJXxQf9ESfI6LVoB1VBsMs69WOHqhy1HUEVzM4Ku+CgDCNaFRRz7xFoy/sv4FOX
D7h5aYVuCLrX/KfttV6V+1GXX/XIyjMN81uZZ8/eiCvjt7D/9fkrUxp9E1Gh6KlV
Dci21OYjh4aStd4tXin0vPHN5wG+IuuYuSzj0Xvu8SzRjFYKsFkjfxPrVsm1zWvN
G1FfiUJ6AveRf9SJVuMTmLHY7jo9hg0/tpm7YpnxlIgzDVZbZDa1yDwaLEg/m6AT
GFHli/nOEsL1c6mbYmvVnGoSupjEj0+MfNIeOUrn8D5Gd66OgvU+FVVFBJQ4ZKi6
ZuckxBjBE3d5XKyxCVryRA3at+WLYA==
=ron6
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20221003' of https://github.com/quic/qemu into staging
Make store handling faster and more robust
Bug fix in gen_tcg_funcs.py
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmM7JS4ACgkQewJE+xLe
# RCJXxQf9ESfI6LVoB1VBsMs69WOHqhy1HUEVzM4Ku+CgDCNaFRRz7xFoy/sv4FOX
# D7h5aYVuCLrX/KfttV6V+1GXX/XIyjMN81uZZ8/eiCvjt7D/9fkrUxp9E1Gh6KlV
# Dci21OYjh4aStd4tXin0vPHN5wG+IuuYuSzj0Xvu8SzRjFYKsFkjfxPrVsm1zWvN
# G1FfiUJ6AveRf9SJVuMTmLHY7jo9hg0/tpm7YpnxlIgzDVZbZDa1yDwaLEg/m6AT
# GFHli/nOEsL1c6mbYmvVnGoSupjEj0+MfNIeOUrn8D5Gd66OgvU+FVVFBJQ4ZKi6
# ZuckxBjBE3d5XKyxCVryRA3at+WLYA==
# =ron6
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Oct 2022 14:08:46 EDT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20221003' of https://github.com/quic/qemu:
Hexagon (gen_tcg_funcs.py): avoid duplicated tcg code on A_CVI_NEW
Hexagon (target/hexagon) move store size tracking to translation
Hexagon (target/hexagon) Change decision to set pkt_has_store_s[01]
Hexagon (target/hexagon) add instruction attributes from archlib
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hexagon instructions with the A_CVI_NEW attribute produce a vector value
that can be used in the same packet. The python function responsible for
generating code for such instructions has a typo ("if" instead of
"elif"), which makes genptr_dst_write_ext() be executed twice, thus also
generating the same tcg code twice. Fortunately, this doesn't cause any
problems for correctness, but it is less efficient than it could be. Fix
it by using an "elif" and avoiding the unnecessary extra code gen.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <fa706b192b2a3a0ffbd399fa8dbf0d5b2c5b82d9.1664568492.git.quic_mathbern@quicinc.com>
The store width is needed for packet commit, so it is stored in
ctx->store_width. Currently, it is set when a store has a TCG
override instead of a QEMU helper. In the QEMU helper case, the
ctx->store_width is not set, we invoke a helper during packet commit
that uses the runtime store width.
This patch ensures ctx->store_width is set for all store instructions,
so performance is improved because packet commit can generate the proper
TCG store rather than the generic helper.
We do this by
- Use the attributes from the instructions during translation to
set ctx->store_width
- Remove setting of ctx->store_width from genptr.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220920080746.26791-3-tsimpson@quicinc.com>
We have found cases where pkt_has_store_s[01] is set incorrectly.
This leads to generating an unnecessary store that is left over
from a previous packet.
Add an attribute to determine if an instruction is a scalar store
The attribute is attached to the fSTORE macro (hex_common.py)
Update the logic in decode.c that sets pkt_has_store_s[01]
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220920080746.26791-4-tsimpson@quicinc.com>
The imported files from the architecture library have added some
instruction attributes. Some of these will be used in a subsequent
patch for determing the size of a store.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220920080746.26791-2-tsimpson@quicinc.com>
Remove encodings guarded by ifdef that is not defined
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220606222327.7682-4-tsimpson@quicinc.com>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VyV operand is only used in the vshuff and vdeal instructions. These
instructions write to both VyV and VxV operands. In the case where
both operands are the same register, we need a separate location for
VyV. We use the existing vtmp field in CPUHexagonState.
Test case added in tests/tcg/hexagon/hvx_misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220718230320.24444-2-tsimpson@quicinc.com>
The semantics of a mem_noshuf packet are that the store effectively
happens before the load. However, in cases where the load raises an
exception, we cannot simply execute the store first.
This change adds a probe to check that the load will not raise an
exception before executing the store.
If the load is predicated, this requires special handling. We check
the condition before performing the probe. Since, we need the EA to
perform the check, we move the GET_EA portion inside CHECK_NOSHUF_PRED.
Test case added in tests/tcg/hexagon/mem_noshuf_exception.c
Suggested-by: Alessandro Di Federico <ale@rev.ng>
Suggested-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220707210546.15985-3-tsimpson@quicinc.com>
Call the CHECK_NOSHUF macro multiple times: once in the
fGEN_TCG_PRED_LOAD() and again in fLOAD().
Before this commit, a packet with a store and a predicated
load with mem_noshuf that gets encoded like this:
{ P0 = cmp.eq(R17,#0x0)
memw(R18+#0x0) = R2
if (!P0.new) R3 = memw(R17+#0x4) }
... would end up generating a branch over both the load
and the store like so:
...
brcond_i32 loc17,$0x0,eq,$L1
mov_i32 loc18,store_addr_1
qemu_st_i32 store_val32_1,store_addr_1,leul,0
qemu_ld_i32 loc16,loc7,leul,0
set_label $L1
...
Test cases added to tests/tcg/hexagon/mem_noshuf.c
Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220707210546.15985-2-tsimpson@quicinc.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
This code appears to be trying to make sure there is a logfile.
But that's already true -- the logfile will either be set by -D,
or will be stderr. In either case, not appropriate here.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-3-richard.henderson@linaro.org>
When building with clang version 13.0.0 (eg. Fedora 13.0.0-3.fc35),
two unused variables introduced by macro GATHER_FUNCTION and
SCATTER_FUNCTION will cause building process failure due to
[-Werror -Wunused-variable].
Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/831
Message-Id: <20220124064339.56027-1-zongyuan.li@smartx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
On Hexagon, c4 is an alias for predicate registers P3:0. If we assign to
c4 inside a packet with reads from predicate registers, the predicate
reads should get the old values.
Test case added to tests/tcg/hexagon/preg_alias.c
Co-authored-by: Michael Lambert <mlambert@cuicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-13-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix typo that checked for 32 bit nan instead of 64 bit
Test case added in tests/tcg/hexagon/usr.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-11-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The float??_minnum implementation differs from Hexagon for SNaN,
it returns NaN, but Hexagon returns the other input. So, we use
float??_minimum_number.
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220308190410.22355-1-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
