"exec/cpu-common.h" is meant to contain the declarations
related to CPU usable with any accelerator / target
combination.
tcg_flush_jmp_cache() is specific to TCG, so restrict its
declaration by moving it to "exec/tb-flush.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-2-philmd@linaro.org>
Store bytes under a mask is fundamentally a cmpxchg, not a straight store.
Use HAVE_CMPXCHG128 instead of HAVE_ATOMIC128_RW.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-8-richard.henderson@linaro.org>
We handled the HAVE_ATOMIC128_RW case with atomic16_set at the top of
the function; the only thing left for a host without that support is
to fall through to cpu_loop_exit_atomic.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-7-richard.henderson@linaro.org>
Move all of it into accel/tcg/monitor.c. This puts everything
about tcg that is only used by the monitor in the same place.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
copy_call() has an unused parameter so remove it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231019101030.128431-7-akihiko.odaki@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231029145033.592566-19-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since we now assume that ioeventfds are present, kvm_io_listener is always
registered. Merge it with kvm_coalesced_pio_listener in a single
listener. Since PIO space does not have KVM memslots attached to it,
the priority is irrelevant.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NR_IOBUS_DEVS was increased to 200 in Linux 2.6.34. By Linux 3.5 it had
increased to 1000 and later ioeventfds were changed to not count against
the limit. But the earlier limit of 200 would already be enough for
kvm_check_many_ioeventfds() to be true, so remove the check.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a remnant of pre-VFIO device assignment; it is not defined
anymore by Linux and not used by QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We can require it unconditionally.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was introduced in KVM in Linux 3.5, we can require it unconditionally
in kvm_irqchip_send_msi(). However, not all architectures have to implement
it so check it only in x86, the only architecture that ever had MSI injection
but not KVM_CAP_SIGNAL_MSI.
ARM uses it to detect the presence of the ITS emulation in the kernel,
introduced in Linux 4.8. Assume that it's there and possibly fail when
realizing the arm-its-kvm device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was introduced in KVM in Linux 2.6.33, we can require it unconditionally.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is only invoked from hw/intc/s390_flic_kvm.c, and therefore
only if CONFIG_KVM is defined.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We'll need the stub soon from memory device context.
While at it, use "unsigned int" as return value and place the
declaration next to kvm_get_free_memslots().
Message-ID: <20230926185738.277351-11-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's return the number of free slots instead of only checking if there
is a free slot. While at it, check all address spaces, which will also
consider SMM under x86 correctly.
This is a preparation for memory devices that consume multiple memslots.
Message-ID: <20230926185738.277351-5-david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Translation logic may partially decode an instruction, then abort and
remove the instruction from the TB. This can happen for example when an
instruction spans two pages. In this case, plugins may get an incorrect
result when calling qemu_plugin_tb_n_insns to query for the number of
instructions in the TB. This patch updates plugin_gen_tb_end to set the
final instruction count.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
[AJB: added g_assert to defed API]
Message-Id: <CADc=-s5RwGViNTR-h5cq3np673W3RRFfhr4vCGJp0EoDUxvhog@mail.gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-23-alex.bennee@linaro.org>
The softmmu/ directory contains files specific to system
emulation. Rename it as system/. Update meson rules, the
MAINTAINERS file and all the documentation and comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename accel.softmmu -> accel.system in file paths
and the register_types() method.
Rename sysemu_stubs_ss -> system_stubs_ss in meson
following the pattern used on other source set names.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-7-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_in_serial_context() is not target specific,
move it declaration to "internal-common.h" (which
we include in the 4 source files modified).
Remove the unused "exec/exec-all.h" header from
cpu-exec-common.c. There is no more target specific
code in this file: make it target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-12-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the unused "exec/exec-all.h" header. There is
no more target specific code in it: make it target
agnostic (rename using the '-common' suffix). Since
it is TCG specific, move it to accel/tcg, updating
MAINTAINERS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-11-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target-agnostic declarations from "internal-target.h"
to a new "internal-common.h" header.
monitor.c now don't include target specific headers and can
be compiled once in system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/internal.h contains target specific declarations.
Unit files including it become "target tainted": they can not
be compiled as target agnostic. Rename using the '-target'
suffix to make this explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the '-common.c' suffix for target agnostic units.
This file is target specific, rename it using the '-target'
suffix.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel-blocker.c is not target specific, move it to system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 00c9a5c2c3 ("accel/tcg: Restrict 'qapi-commands-machine.h'
to system emulation") we moved the definition to accel/tcg/ which is
where this function is called. No need to expose it outside.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A large chunk of ld/st functions are moved from cputlb.c and user-exec.c
to ldst_common.c.inc as their implementation is the same between both
modes.
Eventually, ldst_common.c.inc could be compiled into a separate
target-specific compilation unit, and be linked in with the targets.
Keeping CPUArchState usage out of cputlb.c (CPUArchState is primarily
used to access the mmu index in these functions).
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-12-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The prototype of do_[st|ld]*_mmu() is unified between system- and
user-mode allowing a large chunk of helper_[st|ld]*() and cpu_[st|ld]*()
functions to be expressed in same manner between both modes. These
functions will be moved to ldst_common.c.inc in a following commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-11-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes ldst_atomicity.c.inc almost target-independent, with the exception
of TARGET_PAGE_MASK, which will be addressed in a future patch.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-8-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The goal is to (in the future) allow for per-target compilation of
functions in atomic_template.h whilst atomic_mmu_lookup() and cputlb.c
are compiled once-per user- or system mode.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_[ld|st]*() and mmu_lookup*() are changed to use CPUState over
CPUArchState, moving the target-dependence to the target-facing facing
cpu_[ld|st] functions.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-6-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb; cpu_env instead of env_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_internal() is changed to instead take the generic CPUState
over CPUArchState, in order to lessen the target-specific coupling of
cputlb.c. Note: probe_access*() also don't need the full CPUArchState,
but aren't touched in this patch as they are target-facing.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-5-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes tlb_*() functions to take CPUState instead of CPUArchState, as
they don't require the full CPUArchState. This makes it easier to
decouple target-(in)dependent code.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-4-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that there is no padding between CPUNegativeOffsetState
and CPUArchState, this value is constant across all targets.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that CPUNegativeOffsetState is part of CPUState,
we can reference it directly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Minimize the displacement to can_do_io, since it may
be touched at the start of each TranslationBlock.
It fits into other padding within the substructure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't need to expose these TCG-specific methods to the
whole code base. Register them as AccelClass handlers, they
will be called by the generic accel_cpu_[un]realize() methods.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20231003123026.99229-8-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have tcg_exec_realizefn() return
a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20231003123026.99229-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently accel_cpu_realize() only performs target-specific
realization. Introduce the cpu_common_[un]realize fields in
the base AccelClass to be able to perform target-agnostic
[un]realization of vCPUs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare the stub for parity with accel_cpu_common_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel_cpu_realize() is a generic function working with CPUs
from any target. Rename it using '_common_' to emphasis it is
not target specific.
Suggested-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The AccelCPUClass::cpu_realizefn handler is meant for target
specific code, rename it using '_target_' to emphasis it.
Suggested-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003123026.99229-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the '*fn' suffix for handlers, this is a public method.
Drop the suffix.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20231003123026.99229-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* fix for KVM on Apple M2
* introduce machine property "audiodev"
* ui/vnc: Require audiodev= to enable audio
* audio: remove QEMU_AUDIO_* and -audio-help support
* audio: forbid using default audiodev backend with -audiodev and -nodefaults
* remove compatibility code for old machine types
* make-release: do not ship dtc sources
* build system cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUb0QgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOpnAf9EFXfGkXpqQ5Q8ZbVlVc5GQKofMHW
OZwamTBlp/c07+QcQiMxwLhIW0iyDhrfdCjoFSUaTA8O10FM1YrFv4SkUryYb9B3
bmoTl4NeLvmkxpC47GEeaaBfjyM0G/9Ip9Zsuqx3u+gSzwTbkEstA2u7gcsN0tL9
VlhMSiV82uHhRC/DJYLxr+8bRYSIm1AeuI8K/O1yags85Kztf3UiQUhePIKLznMH
BdORjD+i46xM1dE8ifpdsunm462cDWz/faAnIH0YVKBlshnQHXKTO+GDA/Fbfl51
wFfupZXo93wwgawS7elAUzI+gwaKCPRHA8NDcukeO91hTzk6i14y04u5SQ==
=nv64
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fix from optionrom build
* fix for KVM on Apple M2
* introduce machine property "audiodev"
* ui/vnc: Require audiodev= to enable audio
* audio: remove QEMU_AUDIO_* and -audio-help support
* audio: forbid using default audiodev backend with -audiodev and -nodefaults
* remove compatibility code for old machine types
* make-release: do not ship dtc sources
* build system cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUb0QgUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOpnAf9EFXfGkXpqQ5Q8ZbVlVc5GQKofMHW
# OZwamTBlp/c07+QcQiMxwLhIW0iyDhrfdCjoFSUaTA8O10FM1YrFv4SkUryYb9B3
# bmoTl4NeLvmkxpC47GEeaaBfjyM0G/9Ip9Zsuqx3u+gSzwTbkEstA2u7gcsN0tL9
# VlhMSiV82uHhRC/DJYLxr+8bRYSIm1AeuI8K/O1yags85Kztf3UiQUhePIKLznMH
# BdORjD+i46xM1dE8ifpdsunm462cDWz/faAnIH0YVKBlshnQHXKTO+GDA/Fbfl51
# wFfupZXo93wwgawS7elAUzI+gwaKCPRHA8NDcukeO91hTzk6i14y04u5SQ==
# =nv64
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 03 Oct 2023 04:30:00 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
audio: forbid default audiodev backend with -nodefaults
audio: propagate Error * out of audio_init
vt82c686 machines: Support machine-default audiodev with fallback
hw/ppc: Support machine-default audiodev with fallback
hw/arm: Support machine-default audiodev with fallback
Introduce machine property "audiodev"
audio: remove QEMU_AUDIO_* and -audio-help support
audio: simplify flow in audio_init
audio: commonize voice initialization
audio: return Error ** from audio_state_by_name
audio: allow returning an error from the driver init
audio: Require AudioState in AUD_add_capture
ui/vnc: Require audiodev= to enable audio
crypto: only include tls-cipher-suites in emulators
scsi-disk: ensure that FORMAT UNIT commands are terminated
esp: restrict non-DMA transfer length to that of available data
esp: use correct type for esp_dma_enable() in sysbus_esp_gpio_demux()
Makefile: build plugins before running TCG tests
meson: clean up static_library keyword arguments
make-release: do not ship dtc sources
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix:
tcg/tcg.c:2551:27: error: declaration shadows a local variable [-Werror,-Wshadow]
MemOp op = get_memop(oi);
^
tcg/tcg.c:2437:12: note: previous declaration is here
TCGOp *op;
^
accel/tcg/tb-maint.c:245:18: error: declaration shadows a local variable [-Werror,-Wshadow]
for (int i = 0; i < V_L2_SIZE; i++) {
^
accel/tcg/tb-maint.c:210:9: note: previous declaration is here
int i;
^
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-2-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A register access error typically means something seriously wrong
happened so that anything bad can happen after that and recovery is
impossible.
Even failing one register access is catastorophic as
architecture-specific code are not written so that it torelates such
failures.
Make sure the VM stop and nothing worse happens if such an error occurs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20221201102728.69751-1-akihiko.odaki@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Require i/o as the last insn of a TranslationBlock always,
not only with icount. This is required for i/o that alters
the address space, such as a pci config space write.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1866
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Without this we can get see loops through cpu_io_recompile,
in which the cpu makes no progress.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize can_do_io to true if this the TB has CF_LAST_IO
and will consist of a single instruction. This avoids a
set to 0 followed immediately by a set to 1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify translator_io_start by recording the current
known value of can_do_io within DisasContextBase.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The condition checked is loop invariant; check it only once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With CF_NOIRQ and without !CF_USE_ICOUNT, the load isn't used.
Avoid emitting it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
enable_cpu_pm is only used by softmmu-specific code, namely target/i386/host-cpu.c
and target/i386/kvm/*. It does not need a stub definition anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out int_st_mmio_leN, to be used by both do_st_mmio_leN
and do_st16_mmio_leN. Move the locks down into the two
functions, since each one now covers all accesses to once page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out int_ld_mmio_beN, to be used by both do_ld_mmio_beN
and do_ld16_mmio_beN. Move the locks down into the two
functions, since each one now covers all accesses to once page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid multiple calls to io_prepare for unaligned acceses.
One call to do_st_mmio_leN will never cross pages.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid multiple calls to io_prepare for unaligned acceses.
One call to do_ld_mmio_beN will never cross pages.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Push computation down into the if statements to the point
the data is used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than saving MemoryRegionSection and offset,
save phys_addr and MemoryRegion. This matches up
much closer with the plugin api.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the introduction of CPUTLBEntryFull, we can recover
the full cpu address space physical address without having
to examine the MemoryRegionSection.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are common code from io_readx and io_writex.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we defer address space update and tlb_flush until
the next async_run_on_cpu, the plugin run at the end of the
instruction no longer has to contend with a flushed tlb.
Therefore, delete SavedIOTLB entirely.
Properly return false from tlb_plugin_lookup when we do
not have a tlb match.
Fixes a bug in which SavedIOTLB had stale data, because
there were multiple i/o accesses within a single insn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230831030904.1194667-2-richard.henderson@linaro.org>
When memory region is ram, the lower TARGET_PAGE_BITS is not the
physical section number. Instead, its value is always 0.
Add comment and assert to make it clear.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230901060118.379-1-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
mttcg asserts that an execution ending with EXCP_HALTED must have
cpu->halted. However between the event or instruction that sets
cpu->halted and requests exit and the assertion here, an
asynchronous event could clear cpu->halted.
This leads to crashes running AIX on ppc/pseries because it uses
H_CEDE/H_PROD hcalls, where H_CEDE sets self->halted = 1 and
H_PROD sets other cpu->halted = 0 and kicks it.
H_PROD could be turned into an interrupt to wake, but several other
places in ppc, sparc, and semihosting follow what looks like a similar
pattern setting halted = 0 directly. So remove this assertion.
Reported-by: Ivan Warren <ivan@vmfacility.fr>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230829010658.8252-1-npiggin@gmail.com>
[rth: Keep the case label and adjust the comment.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have Eager Page Split support added for ARM in the kernel,
enable it in Qemu. This adds,
-eager-split-size to -accel sub-options to set the eager page split chunk size.
-enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20230905091246.1931-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While the option still needs to be parsed in the configure script
(it's needed by tests/tcg, and also to decide about recursing
into contrib/plugins), passing it to Meson can be done with -D
instead of using config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HAX is deprecated since commits 73741fda6c ("MAINTAINERS: Abort
HAXM maintenance") and 90c167a1da ("docs/about/deprecated: Mark
HAXM in QEMU as deprecated"), released in v8.0.0.
Per the latest HAXM release (v7.8 [*]), the latest QEMU supported
is v7.2:
Note: Up to this release, HAXM supports QEMU from 2.9.0 to 7.2.0.
The next commit (https://github.com/intel/haxm/commit/da1b8ec072)
added:
HAXM v7.8.0 is our last release and we will not accept
pull requests or respond to issues after this.
It became very hard to build and test HAXM. Its previous
maintainers made it clear they won't help. It doesn't seem to be
a very good use of QEMU maintainers to spend their time in a dead
project. Save our time by removing this orphan zombie code.
[*] https://github.com/intel/haxm/releases/tag/v7.8.0
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230831082016.60885-1-philmd@linaro.org>
After system startup, run the update to memory_dispatch
and the tlb_flush on the cpu. This eliminates a race,
wherein a running cpu sees the memory_dispatch change
but has not yet seen the tlb_flush.
Since the update now happens on the cpu, we need not use
qatomic_rcu_read to protect the read of memory_dispatch.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1826
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1834
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1846
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As we are now using vaddr for representing guest addresses, update the
static assert to check that vaddr fits in the run_on_cpu_data union.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes the address type of the guest memory read/write functions from
target_ulong to abi_ptr. (abi_ptr is currently typedef'd to target_ulong
but that will change in a following commit.) This will reduce the
coupling between accel/ and target/.
Note: Function pointers that point to cpu_[st|ld]*() in target/riscv and
target/rx are also updated in this commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Widens the pc and saved_insn fields of hvf_sw_breakpoint from
target_ulong to vaddr. Other hvf_* functions accessing hvf_sw_breakpoint
are also widened to match.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-3-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Widens the pc and saved_insn fields of kvm_sw_breakpoint from
target_ulong to vaddr. The pc argument of kvm_find_sw_breakpoint is also
widened to match.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The returned value was always zero and had no meaning.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-7-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
An error may occur after s->as is allocated, for example if the
KVM_CREATE_VM ioctl call fails.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-6-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On MIPS, kvm_arch_get_default_type() returns a negative value when an
error occurred so handle the case. Also, let other machines return
negative values when errors occur and declare returning a negative
value as the correct way to propagate an error that happened when
determining KVM type.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-5-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.
For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.
If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apply save_iotlb_data() to io_readx() as well as to io_writex().
This fixes SEGFAULT on qemu_plugin_hwaddr_phys_addr() call plugins
for addresses inside of MMIO region.
Signed-off-by: Dmitriy Solovev <d.solovev@yadro.com>
Signed-off-by: Mikhail Tyutin <m.tyutin@yadro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230804110903.19968-1-m.tyutin@yadro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the single-page case we were issuing misaligned i/o to
the memory subsystem, which does not handle it properly.
Split such accesses via do_{ld,st}_mmio_*.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1800
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the address and size are aligned, send larger chunks
to the memory subsystem. This will be required to make
more use of these helpers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace MMULookupPageData* with CPUTLBEntryFull, addr, size.
Move QEMU_IOTHREAD_LOCK_GUARD to the caller.
This simplifies the usage from do_ld16_beN and do_st16_leN, where
we weren't locking the entire operation, and required hoop jumping
for passing addr and size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On overflow of code_gen_buffer, we unlock the guest pages we had been
translating, but failed to clear gen_tb. On restart, if we cannot
allocate a TB, we exit to the main loop to perform the flush of all
TBs as soon as possible. With garbage in gen_tb, we hit an assert:
../src/accel/tcg/tb-maint.c:348:page_unlock__debug: \
assertion failed: (page_is_locked(pd))
Fixes: deba78709a ("accel/tcg: Always lock pages before translation")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Runs into core dump on arm64 and the backtrace extracted from the
core dump is shown as below. It's caused by accessing uninitialized
@kvm_state in kvm_flush_coalesced_mmio_buffer() due to commit 176d073029
("hw/arm/virt: Use machine_memory_devices_init()"), where the machine's
memory region is added earlier than before.
main
qemu_init
configure_accelerators
qemu_opts_foreach
do_configure_accelerator
accel_init_machine
kvm_init
virt_kvm_type
virt_set_memmap
machine_memory_devices_init
memory_region_add_subregion
memory_region_add_subregion_common
memory_region_update_container_subregions
memory_region_transaction_begin
qemu_flush_coalesced_mmio_buffer
kvm_flush_coalesced_mmio_buffer
Fix it by bailing early in kvm_flush_coalesced_mmio_buffer() on the
uninitialized @kvm_state. With this applied, no crash is observed on
arm64.
Fixes: 176d073029 ("hw/arm/virt: Use machine_memory_devices_init()")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230731125946.2038742-1-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These should match 'start' as target_ulong, not target_long.
On 32bit targets, the parameter was sign-extended to uint64_t,
so only the first mmap within the upper 2GB memory can succeed.
Signed-off-by: Luca Bonissi <qemu@bonslack.org>
Message-Id: <327460e2-0ebd-9edb-426b-1df80d16c32a@bonslack.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In replacing target_ulong with vaddr and TARGET_FMT_lx with VADDR_PRIx,
the zero-padding of TARGET_FMT_lx got lost. Readd 16-wide zero-padding
for logging consistency.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230713120746.26897-1-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only, the probe for page writability may race with another
thread's mprotect. Take the mmap_lock around the operation. This
is still faster than the start/end_exclusive fallback.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the initial commit, cdfac37be0, the sense of the test is incorrect,
as the -1/0 return was confusing. In bef6f008b9, we mechanically
invert all callers while changing to false/true return, preserving the
incorrectness of the test.
Now that the return sense is sane, it's easy to see that if !write,
then the page is not modifiable (i.e. most likely read-only, with
PROT_NONE handled via SIGSEGV).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit f0a08b0913 we changed the type of the PC from
target_ulong to vaddr. In doing so we inadvertently dropped the
zero-padding on the PC in trace lines (the second item inside the []
in these lines). They used to look like this on AArch64, for
instance:
Trace 0: 0x7f2260000100 [00000000/0000000040000000/00000061/ff200000]
and now they look like this:
Trace 0: 0x7f4f50000100 [00000000/40000000/00000061/ff200000]
and if the PC happens to be somewhere low like 0x5000
then the field is shown as /5000/.
This is because TARGET_FMT_lx is a "%08x" or "%016x" specifier,
depending on TARGET_LONG_SIZE, whereas VADDR_PRIx is just PRIx64
with no width specifier.
Restore the zero-padding by adding an 016 width specifier to
this tracing and a couple of others that were similarly recently
changed to use VADDR_PRIx without a width specifier.
We can't unfortunately restore the "32-bit guests are padded to
8 hex digits and 64-bit guests to 16 hex digits" behaviour so
easily.
Fixes: f0a08b0913 ("accel/tcg/cpu-exec.c: Widen pc to vaddr")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-id: 20230711165434.4123674-1-peter.maydell@linaro.org
We adjust CONFIG_ATOMIC128 and CONFIG_CMPXCHG128 with
CONFIG_ATOMIC128_OPT in atomic128.h. It is difficult
to tell when those changes have been applied with the
ifdef we must use with CONFIG_CMPXCHG128. So instead
use HAVE_CMPXCHG128, which triggers -Werror-undef when
the proper header has not been included.
Improves tcg_gen_atomic_cmpxchg_i128 for s390x host, which
requires CONFIG_ATOMIC128_OPT. Without this we fall back
to EXCP_ATOMIC to single-step 128-bit atomics, which is
slow enough to cause some tests to time out.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had done this for user-mode by invoking page_protect
within the translator loop. Extend this to handle system
mode as well. Move page locking out of tb_link_page.
Reported-by: Liren Wei <lrwei@bupt.edu.cn>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
Only PAGE_WRITE needs special attention, all others can be
handled as we do for PAGE_READ. Adjust the mask.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230707204054.8792-24-richard.henderson@linaro.org>
Use the interval tree to locate an unused range in the VM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-17-richard.henderson@linaro.org>
Examine the interval tree to validate that a region
has no existing mappings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-10-richard.henderson@linaro.org>
Share the setjmp cleanup between cpu_exec_step_atomic
and cpu_exec_setjmp.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
Ensure that that both the start and last addresses are within
the same guest page.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230629082522.606219-3-mark.cave-ayland@ilande.co.uk>
[rth: Use tcg_debug_assert, simplify the expression]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Due to a copy-paste error in tb_invalidate_phys_range, the wrong
start address was passed to tb_invalidate_phys_page_range__locked.
Correct is to use the start of each page in turn.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: e506ad6a05 ("accel/tcg: Pass last not end to tb_invalidate_phys_range")
Message-Id: <20230629082522.606219-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add MEMORY_LISTNER_PRIORITY_MIN for the symbolic value for the min value of
the memory listener instead of the hard-coded magic value 0. Add explicit
initialization.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <29f88477fe82eb774bcfcae7f65ea21995f865f2.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MEMORY_LISTENER_PRIORITY_DEV_BACKEND for the symbolic value
for memory listener to replace the hard-coded value 10 for the
device backend.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <8314d91688030d7004e96958f12e2c83fb889245.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MEMORY_LISTNER_PRIORITY_ACCEL for the symbolic value for the memory
listener to replace the hard-coded value 10 for accel.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <feebe423becc6e2aa375f59f6abce9a85bc15abb.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Avoid when calling kvm_direct_msi_enabled() from
arm_gicv3_its_common.c the next commit:
Undefined symbols for architecture arm64:
"_kvm_direct_msi_allowed", referenced from:
_its_class_name in hw_intc_arm_gicv3_its_common.c.o
ld: symbol(s) not found for architecture arm64
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405160454.97436-3-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState.
Rename the 'hvf_vcpu_state' structure as 'AccelCPUState'.
Use the generic 'accel' field of CPUState instead of 'hvf'.
Replace g_malloc0() by g_new0() for readability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-17-philmd@linaro.org>
On Windows hosts, cpu->hThread is assigned but never accessed:
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-4-philmd@linaro.org>
This frees up one bit of the primary tlb flags without
impacting the TLB_NOTDIRTY logic.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have run out of bits we can use within the CPUTLBEntry comparators,
as TLB_FLAGS_MASK cannot overlap alignment.
Store slow_flags[] in CPUTLBEntryFull, and merge with the flags from
the comparator. A new TLB_FORCE_SLOW bit is set within the comparator
as an indication that the slow path must be used.
Move TLB_BSWAP to TLB_SLOW_FLAGS_MASK. Since we are out of bits,
we cannot create a new bit without moving an old one.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now issue host memory barriers to match the guest memory order.
Continue to disable MTTCG only if the guest has not been ported.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bring the helpers into line with the rest of tcg in respecting
guest memory ordering.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TBStats will be introduced to replace CONFIG_PROFILER totally, here
remove all CONFIG_PROFILER related stuffs first.
Signed-off-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230607122411.3394702-2-fei2.wu@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use vaddr for guest virtual address in translator_use_goto_tb() and
translator_loop().
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-11-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update atomic_mmu_lookup() and cpu_mmu_lookup() to take the guest
virtual address as a vaddr instead of a target_ulong.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Functions for probing memory accesses (and functions that call these)
are updated to take a vaddr for guest virtual addresses over
target_ulong.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Related functions dealing with the jump cache are also updated.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-8-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-7-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Functions accessing MMULookupPageData are also updated.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-5-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-3-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replaces target_ulong with vaddr for guest virtual addresses in tlb_*()
functions and auxilliary structs.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-2-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A regression has been detected in latency testing of KVM guests.
More specifically, it was observed that the cyclictest
numbers inside of an isolated vcpu (running on isolated pcpu) are:
Where a maximum of 50us is acceptable.
The implementation of KVM_GET_STATS_FD uses run_on_cpu to query
per vcpu statistics, which interrupts the vcpu (and is unnecessary).
To fix this, open the per vcpu stats fd on vcpu initialization,
and read from that fd from QEMU's main thread.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only need lookup_tb_ptr() prototype.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230611085846.21415-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Invert some if() ladders for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Otherwise we hit the default assert not reached.
Handle it as MO_ATOM_NONE, because of size and misalignment.
We already handle this correctly in do_ld16_beN.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
-----BEGIN PGP SIGNATURE-----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=fOTc
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 8.1
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
# gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
# LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
# F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
# jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
# WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
# Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
# N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
# Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
# zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
# Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
# uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
# =fOTc
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits)
hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only.
target/riscv: Smepmp: Return error when access permission not allowed in PMP
target/riscv/vector_helper.c: Remove the check for extra tail elements
target/riscv/vector_helper.c: clean up reference of MTYPE
target/riscv: Fix initialized value for cur_pmmask
util/log: Add vector registers to log
docs/system: riscv: Add pflash usage details
riscv/virt: Support using pflash via -blockdev option
hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none"
target/riscv: Remove pc_succ_insn from DisasContext
target/riscv: Enable PC-relative translation
target/riscv: Use true diff for gen_pc_plus_diff
target/riscv: Change gen_set_pc_imm to gen_update_pc
target/riscv: Change gen_goto_tb to work on displacements
target/riscv: Introduce cur_insn_len into DisasContext
target/riscv: Fix target address to update badaddr
disas/riscv.c: Remove redundant parentheses
disas/riscv.c: Fix lines with over 80 characters
disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions
disas/riscv.c: Support disas for Z*inx extensions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On MacOS 11 and subsequent versions, in case the resulting binary is not
signed with the proper entitlement, handle and report the HV_DENIED
error.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Message-Id: <20230608123014.28715-1-quic_acaggian@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The computation is documented as unused in this case,
but triggers an ubsan error:
../accel/tcg/ldst_atomicity.c.inc:837:33: runtime error: shift exponent -32 is negative
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../accel/tcg/ldst_atomicity.c.inc:837:33 in
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230606171629.98157-1-richard.henderson@linaro.org>
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains that perf_marker is never unmapped.
Fix by unmapping it in perf_exit().
Fixes: Coverity CID 1507929
Fixes: 5584e2dbe8 ("tcg: add perfmap and jitdump")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605114134.1169974-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is only used in translator.c, and uses a
target-specific typedef: abi_ptr.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This finally paves the way for tcg/ to be built once per mode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce the header to only bswap.h and cpu_ldst.h.
Move exec/translate-all.h to translator.c.
Reduce tcg.h and tcg-op.h to tcg-op-common.h.
Remove otherwise unused headers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is used by exactly one host in extraordinary circumstances.
This means that translator.h need not include plugin-gen.h;
translator.c already includes plugin-gen.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only usage of gen_tb_start and gen_tb_end are here.
Move the static icount_start_insn variable into a local
within translator_loop. Simplify the two subroutines
by passing in the existing local cflags variable.
Leave only the declaration of gen_io_start in gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes TranslationBlock agnostic to the address size of the guest.
Use vaddr for pc, since that's always a virtual address.
Use uint64_t for cs_base, since usage varies between guests.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From this remove, it's no longer clear what this is attempting
to protect. The last time a use of this define was added to
the source tree, as opposed to merely moved around, was 2008.
There have been many cleanups since that time and this is
no longer required for the build to succeed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This replaces of TCG_GUEST_DEFAULT_MO in tcg-op-ldst.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_INSN_START_WORDS in tcg.c.
Split out "tcg/insn-start-words.h" and use it in target/.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-proto-common.h without the target specific portion.
Use that in tcg-op-common.h. Include helper-proto.h in target/arm
and target/hexagon before helper-info.c.inc; all other targets are
already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move a use of TARGET_LONG_BITS out of tcg/tcg.h.
Include the new file only where required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been pulled in from exec/cpu_ldst.h, via exec/exec-all.h,
but the include of tcg.h will be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Removes the only use of TARGET_LONG_BITS from tcg.h, which is to be
target independent. Move the symbol to a define in tcg-op.h, which
will continue to be target dependent. Rather than complicate matters
for the use in tb_gen_code(), expand the definition there.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now we no longer have dynamic state affecting things we can remove the
additional fields in cpu.h and simplify the TB hash calculation.
For the benchmark:
hyperfine -w 2 -m 20 \
"./arm-softmmu/qemu-system-arm -cpu cortex-a15 \
-machine type=virt,highmem=off \
-display none -m 2048 \
-serial mon:stdio \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-pci,netdev=unet \
-device virtio-scsi-pci \
-blockdev driver=raw,node-name=hd,discard=unmap,file.driver=host_device,file.filename=/dev/zen-disk/debian-bullseye-armhf \
-device scsi-hd,drive=hd -smp 4 \
-kernel /home/alex/lsrc/linux.git/builds/arm/arch/arm/boot/zImage \
-append 'console=ttyAMA0 root=/dev/sda2 systemd.unit=benchmark.service' \
-snapshot"
It has a marginal effect on runtime, before:
Time (mean ± σ): 26.279 s ± 2.438 s [User: 41.113 s, System: 1.843 s]
Range (min … max): 24.420 s … 32.565 s 20 runs
after:
Time (mean ± σ): 24.440 s ± 2.885 s [User: 34.474 s, System: 2.028 s]
Range (min … max): 21.663 s … 29.937 s 20 runs
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1358
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-10-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-9-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
PAGE_WRITE is current writability, as modified by TB protection;
PAGE_WRITE_ORG is the original page writability.
Fixes: cdfac37be0 ("accel/tcg: Honor atomicity of loads")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been set since the beginning, is never undefined,
and it would seem to be harmful to debugging to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the locally defined load_atomic16 and store_atomic16,
along with HAVE_al16 and HAVE_al16_fast in favor of the
routines defined in atomic128.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These symbols will shortly become dynamic runtime tests and
therefore not appropriate for the preprocessor. Use the
matching CONFIG_* symbols for that purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that load/store are gone, we're always passing
PAGE_READ | PAGE_WRITE for RMW atomic operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Atomic load/store of 128-byte quantities is now handled
by cpu_{ld,st}16_mmu.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
The only use of the functions with explicit endianness was in
target/sparc64, and that was only to satisfy the assert: the
correct endianness is already built into memop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not only the routines in ldst_atomicity.c.inc need markup,
but also the ones in the headers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In fcdab382c8 we removed a tcg_gen_extu_tl_i64 from gen_empty_mem_cb,
and failed to adjust the associated copy, leading to a failed assert.
Fixes: fcdab382c8 ("accel/tcg: Widen plugin_gen_empty_mem_callback to i64")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230518145813.2940745-1-richard.henderson@linaro.org>
arm64 has different capability from x86 to enable the dirty ring, which
is KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Besides, arm64 also needs the backup
bitmap extension (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) when 'kvm-arm-gicv3'
or 'arm-its-kvm' device is enabled. Here the extension is always enabled
and the unnecessary overhead to do the last stage of dirty log synchronization
when those two devices aren't used is introduced, but the overhead should
be very small and acceptable. The benefit is cover future cases where those
two devices are used without modifying the code.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230509022122.20888-5-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to multiple capabilities associated with the dirty ring for different
architectures: KVM_CAP_DIRTY_{LOG_RING, LOG_RING_ACQ_REL} for x86 and
arm64 separately. There will be more to be done in order to support the
dirty ring for arm64.
Lets add helper kvm_dirty_ring_init() to enable the dirty ring. With this,
the code looks a bit clean.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the last stage of live migration or memory slot removal, the
backup bitmap needs to be synchronized when it has been enabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The global dirty log synchronization is used when KVM and dirty ring
are enabled. There is a particularity for ARM64 where the backup
bitmap is used to track dirty pages in non-running-vcpu situations.
It means the dirty ring works with the combination of ring buffer
and backup bitmap. The dirty bits in the backup bitmap needs to
collected in the last stage of live migration.
In order to identify the last stage of live migration and pass it
down, an extra parameter is added to the relevant functions and
callbacks. This last stage indicator isn't used until the dirty
ring is enabled in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disconnect guest tlb parameters from TCG compilation.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable replacement of TARGET_LONG_BITS within tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we do this inside gen_empty_mem_cb anyway, let's
do this earlier inside tcg expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As do_gen_mem_cb is called once, merge it into gen_empty_mem_cb.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As gen_mem_wrapped is only used in plugin_gen_empty_mem_callback,
we can avoid the curiosity of union mem_gen_fn by inlining it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always pass the target address as uint64_t.
Adjust tcg_out_{ld,st}_helper_args to match.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already pass uint64_t to restore_state_to_opc; this changes all
of the other uses from insn_start through the encoding to decoding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is an edge condition prior to gcc13 for which optimization
is required to generate 16-byte atomic sequences. Detect this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG backends may need to defer to a helper to implement
the atomicity required by a given operation. Mirror the
interface used in system mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create ldst_atomicity.c.inc.
Not required for user-only code loads, because we've ensured that
the page is read-only before beginning to translate code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
