Mark up the sysreg definitions for the system instructions
trapped by HFGITR bits 0..11. These bits cover various
cache maintenance operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-17-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-17-peter.maydell@linaro.org
Mark up the sysreg definitions for the registers trapped
by HDFGRTR/HDFGWTR bits 12..x.
Bits 12..22 and bit 58 are for PMU registers.
The remaining bits in HDFGRTR/HDFGWTR are for traps on
registers that are part of features we don't implement:
Bits 23..32 and 63 : FEAT_SPE
Bits 33..48 : FEAT_ETE
Bits 50..56 : FEAT_TRBE
Bits 59..61 : FEAT_BRBE
Bit 62 : FEAT_SPEv1p2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-16-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-16-peter.maydell@linaro.org
Mark up the sysreg definitons for the registers trapped
by HDFGRTR/HDFGWTR bits 0..11. These cover various debug
related registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-15-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-15-peter.maydell@linaro.org
Mark up the sysreg definitions for the registers trapped
by HFGRTR/HFGWTR bits 36..63.
Of these, some correspond to RAS registers which we implement as
always-UNDEF: these don't need any extra handling for FGT because the
UNDEF-to-EL1 always takes priority over any theoretical
FGT-trap-to-EL2.
Bit 50 (NACCDATA_EL1) is for the ACCDATA_EL1 register which is part
of the FEAT_LS64_ACCDATA feature which we don't yet implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-14-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-14-peter.maydell@linaro.org
Implement the machinery for fine-grained traps on normal sysregs.
Any sysreg with a fine-grained trap will set the new field to
indicate which FGT register bit it should trap on.
FGT traps only happen when an AArch64 EL2 enables them for
an AArch64 EL1. They therefore are only relevant for AArch32
cpregs when the cpreg can be accessed from EL0. The logic
in access_check_cp_reg() will check this, so it is safe to
add a .fgt marking to an ARM_CP_STATE_BOTH ARMCPRegInfo.
The DO_BIT and DO_REV_BIT macros define enum constants FGT_##bitname
which can be used to specify the FGT bit, eg
.fgt = FGT_AFSR0_EL1
(We assume that there is no bit name duplication across the FGT
registers, for brevity's sake.)
Subsequent commits will add the .fgt fields to the relevant register
definitions and define the FGT_nnn values for them.
Note that some of the FGT traps are for instructions that we don't
handle via the cpregs mechanisms (mostly these are instruction traps).
Those we will have to handle separately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-10-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-10-peter.maydell@linaro.org
Define the system registers which are provided by the
FEAT_FGT fine-grained trap architectural feature:
HFGRTR_EL2, HFGWTR_EL2, HDFGRTR_EL2, HDFGWTR_EL2, HFGITR_EL2
All these registers are a set of bit fields, where each bit is set
for a trap and clear to not trap on a particular system register
access. The R and W register pairs are for system registers,
allowing trapping to be done separately for reads and writes; the I
register is for system instructions where trapping is on instruction
execution.
The data storage in the CPU state struct is arranged as a set of
arrays rather than separate fields so that when we're looking up the
bits for a system register access we can just index into the array
rather than having to use a switch to select a named struct member.
The later FEAT_FGT2 will add extra elements to these arrays.
The field definitions for the new registers are in cpregs.h because
in practice the code that needs them is code that also needs
the cpregs information; cpu.h is included in a lot more files.
We're also going to add some FGT-specific definitions to cpregs.h
in the next commit.
We do not implement HAFGRTR_EL2, because we don't implement
FEAT_AMUv1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-9-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-9-peter.maydell@linaro.org
The HSTR_EL2 register is not supposed to have an effect unless EL2 is
enabled in the current security state. We weren't checking for this,
which meant that if the guest set up the HSTR_EL2 register we would
incorrectly trap even for accesses from Secure EL0 and EL1.
Add the missing checks. (Other places where we look at HSTR_EL2
for the not-in-v8A bits TTEE and TJDBX are already checking that
we are in NS EL0 or EL1, so there we alredy know EL2 is enabled.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-8-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-8-peter.maydell@linaro.org
The semantics of HSTR_EL2 require that it traps cpreg accesses
to EL2 for:
* EL1 accesses
* EL0 accesses, if the access is not UNDEFINED when the
trap bit is 0
(You can see this in the I_ZFGJP priority ordering, where HSTR_EL2
traps from EL1 to EL2 are priority 12, UNDEFs are priority 13, and
HSTR_EL2 traps from EL0 are priority 15.)
However, we don't get this right for EL1 accesses which UNDEF because
the register doesn't exist at all or because its ri->access bits
non-configurably forbid the access. At EL1, check for the HSTR_EL2
trap early, before either of these UNDEF reasons.
We have to retain the HSTR_EL2 check in access_check_cp_reg(),
because at EL0 any kind of UNDEF-to-EL1 (including "no such
register", "bad ri->access" and "ri->accessfn returns 'trap to EL1'")
takes precedence over the trap to EL2. But we only need to do that
check for EL0 now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230130182459.3309057-7-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-7-peter.maydell@linaro.org
The HSTR_EL2 register has a collection of trap bits which allow
trapping to EL2 for AArch32 EL0 or EL1 accesses to coprocessor
registers. The specification of these bits is that when the bit is
set we should trap
* EL1 accesses
* EL0 accesses, if the access is not UNDEFINED when the
trap bit is 0
In other words, all UNDEF traps from EL0 to EL1 take precedence over
the HSTR_EL2 trap to EL2. (Since this is all AArch32, the only kind
of trap-to-EL1 is the UNDEF.)
Our implementation doesn't quite get this right -- we check for traps
in the order:
* no such register
* ARMCPRegInfo::access bits
* HSTR_EL2 trap bits
* ARMCPRegInfo::accessfn
So UNDEFs that happen because of the access bits or because the
register doesn't exist at all correctly take priority over the
HSTR_EL2 trap, but where a register can UNDEF at EL0 because of the
accessfn we are incorrectly always taking the HSTR_EL2 trap. There
aren't many of these, but one example is the PMCR; if you look at the
access pseudocode for this register you can see that UNDEFs taken
because of the value of PMUSERENR.EN are checked before the HSTR_EL2
bit.
Rearrange helper_access_check_cp_reg() so that we always call the
accessfn, and use its return value if it indicates that the access
traps to EL0 rather than continuing to do the HSTR_EL2 check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-6-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-6-peter.maydell@linaro.org
Rearrange the code in do_coproc_insn() so that we calculate the
syndrome value for a potential trap early; we're about to add a
second check that wants this value earlier than where it is currently
determined.
(Specifically, a trap to EL2 because of HSTR_EL2 should take
priority over an UNDEF to EL1, even when the UNDEF is because
the register does not exist at all or because its ri->access
bits non-configurably fail the access. So the check we put in
for HSTR_EL2 trapping at EL1 (which needs the syndrome) is
going to have to be done before the check "is the ARMCPRegInfo
pointer NULL".)
This commit is just code motion; the change to HSTR_EL2
handling that will use the 'syndrome' variable is in a
subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-5-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-5-peter.maydell@linaro.org
We added the CPAccessResult values CP_ACCESS_TRAP_UNCATEGORIZED_EL2
and CP_ACCESS_TRAP_UNCATEGORIZED_EL3 purely in order to use them in
the ats_access() function, but doing so was incorrect (a bug fixed in
a previous commit). There aren't any cases where we want an access
function to be able to request a trap to EL2 or EL3 with a zero
syndrome value, so remove these enum values.
As well as cleaning up dead code, the motivation here is that
we'd like to implement fine-grained-trap handling in
helper_access_check_cp_reg(). Although the fine-grained traps
to EL2 are always lower priority than trap-to-same-EL and
higher priority than trap-to-EL3, they are in the middle of
various other kinds of trap-to-EL2. Knowing that a trap-to-EL2
must always for us have the same syndrome (ie that an access
function will return CP_ACCESS_TRAP_EL2 and there is no other
kind of trap-to-EL2 enum value) means we don't have to try
to choose which of the two syndrome values to report if the
access would trap to EL2 both for the fine-grained-trap and
because the access function requires it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-4-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-4-peter.maydell@linaro.org
The AArch32 ATS12NSO* address translation operations are supposed to
trap to either EL2 or EL3 if they're executed at Secure EL1 (which
can only happen if EL3 is AArch64). We implement this, but we got
the syndrome value wrong: like other traps to EL2 or EL3 on an
AArch32 cpreg access, they should report the 0x3 syndrome, not the
0x0 'uncategorized' syndrome. This is clear in the access pseudocode
for these instructions.
Fix the syndrome value for these operations by correcting the
returned value from the ats_access() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-3-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-3-peter.maydell@linaro.org
The encodings 0,0,C7,C9,0 and 0,0,C7,C9,1 are AT SP1E1RP and AT
S1E1WP, but our ARMCPRegInfo definitions for them incorrectly name
them AT S1E1R and AT S1E1W (which are entirely different
instructions). Fix the names.
(This has no guest-visible effect as the names are for debug purposes
only.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-2-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-2-peter.maydell@linaro.org
We currently only support GICv2 emulation. To also support GICv3, we will
need to pass a few system registers into their respective handler functions.
This patch adds support for HVF to call into the TCG callbacks for GICv3
system register handlers. This is safe because the GICv3 TCG code is generic
as long as we limit ourselves to EL0 and EL1 - which are the only modes
supported by HVF.
To make sure nobody trips over that, we also annotate callbacks that don't
work in HVF mode, such as EL state change hooks.
With GICv3 support in place, we can run with more than 8 vCPUs.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20230128224459.70676-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not encode the pointer as a constant in the opcode stream.
This pointer is specific to the cpu that first generated the
translation, which runs into problems with both hot-pluggable
cpus and user-only threads, as cpus are removed. It's also a
potential correctness issue in the theoretical case of a
slightly-heterogenous system, because if CPU 0 generates a
TB and then CPU 1 executes it, CPU 1 will end up using CPU 0's
hash table, which might have a wrong set of registers in it.
(All our current systems are either completely homogenous,
M-profile, or have CPUs sufficiently different that they
wouldn't be sharing TBs anyway because the differences would
show up in the TB flags, so the correctness issue is only
theoretical, not practical.)
Perform the lookup in either helper_access_check_cp_reg,
or a new helper_lookup_cp_reg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230106194451.1213153-3-richard.henderson@linaro.org
[PMM: added note in commit message about correctness issue]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ri == NULL case to the top of the function and return.
This allows the else to be removed and the code unindented.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230106194451.1213153-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qemu doesn't implement Debug Communication Channel, as well as the rest
of external debug interface. However, Microsoft Hyper-V in tries to
access some of those registers during an EL2 context switch.
Since there is no architectural way to not advertise support for external
debug, provide RAZ/WI stubs for OSDTRRX_EL1, OSDTRTX_EL1 and OSECCR_EL1
registers in the same way the rest of DCM is currently done. Do account
for access traps though with access_tda.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230120155929.32384-3-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture does not define any functionality for the CLAIM tag bits.
So we will just keep the raw bits, as per spec.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230120155929.32384-2-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In v7m_exception_taken(), for v8M we set the EXC_RETURN.ES bit if
either the exception targets Secure or if the CPU doesn't implement
the Security Extension. This is incorrect: the v8M Arm ARM specifies
that the ES bit should be RES0 if the Security Extension is not
implemented, and the pseudocode agrees.
Remove the incorrect condition, so that we leave the ES bit 0
if the Security Extension isn't implemented.
This doesn't have any guest-visible effects for our current set of
emulated CPUs, because all our v8M CPUs implement the Security
Extension; but it's worth fixing in case we add a v8M CPU without
the extension in future.
Reported-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Unify the two helper_set_pstate_{sm,za} in this function.
Do not call helper_* functions from svcr_write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230112102436.1913-8-philmd@linaro.org
Message-Id: <20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BASEPRI, FAULTMASK, and their _NS equivalents only exist on devices with
the Main Extension. However, the MRS instruction did not check this,
and the MSR instruction handled it inconsistently (warning BASEPRI, but
silently ignoring writes to BASEPRI_NS). Unify this behavior and always
warn when reading or writing any of these registers if the extension is
not present.
Signed-off-by: David Reiss <dreiss@meta.com>
Message-id: 167330628518.10497.13100425787268927786-0@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a 64-bit register on AArch64, even if the high 44 bits
are RES0. Because this is defined as ARM_CP_STATE_BOTH, we are
asserting that the cpreg field is 64-bits.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1400
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230115171633.3171890-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit
to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu
uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3
write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is
enabled and exposed to the guest. As a result EL3 writes of that bit are
ignored.
Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed. This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.
Specifically, the following new ID registers/fields are exposed to
userspace:
ID_AA64PFR1_EL1.BT: bits 3-0
ID_AA64PFR1_EL1.MTE: bits 11-8
ID_AA64PFR1_EL1.SME: bits 27-24
ID_AA64ZFR0_EL1.SVEver: bits 3-0
ID_AA64ZFR0_EL1.AES: bits 7-4
ID_AA64ZFR0_EL1.BitPerm: bits 19-16
ID_AA64ZFR0_EL1.BF16: bits 23-20
ID_AA64ZFR0_EL1.SHA3: bits 35-32
ID_AA64ZFR0_EL1.SM4: bits 43-40
ID_AA64ZFR0_EL1.I8MM: bits 47-44
ID_AA64ZFR0_EL1.F32MM: bits 55-52
ID_AA64ZFR0_EL1.F64MM: bits 59-56
ID_AA64SMFR0_EL1.F32F32: bit 32
ID_AA64SMFR0_EL1.B16F32: bit 34
ID_AA64SMFR0_EL1.F16F32: bit 35
ID_AA64SMFR0_EL1.I8I32: bits 39-36
ID_AA64SMFR0_EL1.F64F64: bit 48
ID_AA64SMFR0_EL1.I16I64: bits 55-52
ID_AA64SMFR0_EL1.FA64: bit 63
ID_AA64MMFR0_EL1.ECV: bits 63-60
ID_AA64MMFR1_EL1.AFP: bits 47-44
ID_AA64MMFR2_EL1.AT: bits 35-32
ID_AA64ISAR0_EL1.RNDR: bits 63-60
ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16: bits 47-44
ID_AA64ISAR1_EL1.DGH: bits 51-48
ID_AA64ISAR1_EL1.I8MM: bits 55-52
ID_AA64ISAR2_EL1.WFxT: bits 3-0
ID_AA64ISAR2_EL1.RPRES: bits 7-4
ID_AA64ISAR2_EL1.GPA3: bits 11-8
ID_AA64ISAR2_EL1.APA3: bits 15-12
The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.
The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some unused headers.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221213190537.511-7-farosas@suse.de
[added back some includes that are still needed at this point]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the following:
ERROR: spaces required around that '|' (ctx:VxV)
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that '+' (ctx:VxB)
ERROR: space prohibited between function name and open parenthesis '('
(the last two still have some occurrences in macros which I left
behind because it might impact readability)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix these:
WARNING: Block comments use a leading /* on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20221213190537.511-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check semihosting_enabled() wants to know if the guest is
currently in user mode. Unlike the other cases the test was inverted
causing us to block semihosting calls in non-EL0 modes.
Cc: qemu-stable@nongnu.org
Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All constants are taken from the ARM Cortex-R52 Processor TRM Revision: r1p3
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-8-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8-R AArch32 CPUs behave as if TTBCR.EAE is always 1 even
tough they don't have the TTBCR register.
See ARM Architecture Reference Manual Supplement - ARMv8, for the ARMv8-R
AArch32 architecture profile Version:A.c section C1.2.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-5-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The v8R PMSAv8 has a two-stage MPU translation process, but, unlike
VMSAv8, the stage 2 attributes are in the same format as the stage 1
attributes (8-bit MAIR format). Rather than converting the MAIR
format to the format used for VMSA stage 2 (bits [5:2] of a VMSA
stage 2 descriptor) and then converting back to do the attribute
combination, allow combined_attrs_nofwb() to accept s2 attributes
that are already in the MAIR format.
We move the assert() to combined_attrs_fwb(), because that function
really does require a VMSA stage 2 attribute format. (We will never
get there for v8R, because PMSAv8 does not implement FEAT_S2FWB.)
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-4-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RVBAR shadows RVBAR_ELx where x is the highest exception
level if the highest EL is not EL3. This patch also allows
ARMv8 CPUs to change the reset address with
the rvbar property.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221206102504.165775-3-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cores with PMSA have the MPUIR register which has the
same encoding as the MIDR alias with opc2=4. So we only
add that alias if we are not realizing a core that
implements PMSA.
Signed-off-by: Tobias Röhmel <tobias.roehmel@rwth-aachen.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221206102504.165775-2-tobias.roehmel@rwth-aachen.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_twostage() we set the lg_page_size of the result to
the maximum of the stage 1 and stage 2 page sizes. This works for
the case where we do want to create a TLB entry, because we know the
common TLB code only creates entries of the TARGET_PAGE_SIZE and
asking for a size larger than that only means that invalidations
invalidate the whole larger area. However, if lg_page_size is
smaller than TARGET_PAGE_SIZE this effectively means "don't create a
TLB entry"; in this case if either S1 or S2 said "this covers less
than a page and can't go in a TLB" then the final result also should
be marked that way. Set the resulting page size to 0 if either
stage asked for a less-than-a-page entry, and expand the comment
to explain what's going on.
This has no effect for VMSA because currently the VMSA lookup always
returns results that cover at least TARGET_PAGE_SIZE; however when we
add v8R support it will reuse this code path, and for v8R the S1 and
S2 results can be smaller than TARGET_PAGE_SIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221212142708.610090-1-peter.maydell@linaro.org
Convert the Arm CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20221124115023.2437291-3-peter.maydell@linaro.org
When building with --disable-tcg on Darwin we get:
target/arm/cpu.c:725:16: error: incomplete definition of type 'struct TCGCPUOps'
cc->tcg_ops->do_interrupt(cs);
~~~~~~~~~~~^
Commit 083afd18a9 ("target/arm: Restrict cpu_exec_interrupt()
handler to sysemu") limited this block to system emulation,
but neglected to also limit it to TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20221209110823.59495-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as
poisoned in common code, so the files that include this header have to
be added to specific_ss and recompiled for each, qemu-system-arm and
qemu-system-aarch64. However, since the kvm headers are only optionally
used in kvm-constants.h for some sanity checks, we can additionally
check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro,
so kvm-constants.h can also be used from "common" files (without the
sanity checks - which should be OK since they are still done from other
target-specific files instead). This way, and by adjusting some other
include statements in the related files here and there, we can move some
files from specific_ss into softmmu_ss, so that they only need to be
compiled once during the build process.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221202154023.293614-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the ID registers for TCG's '-cpu max' to report the
FEAT_EVT Enhanced Virtualization Traps support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TID4 trap allows trapping of the cache ID
registers CCSIDR_EL1, CCSIDR2_EL1, CLIDR_EL1 and CSSELR_EL1 (and
their AArch32 equivalents). This is a subset of the registers
trapped by HCR_EL2.TID2, which includes all of these and also the
CTR_EL0 register.
Our implementation already uses a separate access function for
CTR_EL0 (ctr_el0_access()), so all of the registers currently using
access_aa64_tid2() should also be checking TID4. Make that function
check both TID2 and TID4, and rename it appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TICAB bit allows trapping of the ICIALLUIS
and IC IALLUIS cache maintenance instructions.
The HCR_EL2.TOCU bit traps all the other cache maintenance
instructions that operate to the point of unification:
AArch64 IC IVAU, IC IALLU, DC CVAU
AArch32 ICIMVAU, ICIALLU, DCCMVAU
The two trap bits between them cover all of the cache maintenance
instructions which must also check the HCR_TPU flag. Turn the old
aa64_cacheop_pou_access() function into a helper function which takes
the set of HCR_EL2 flags to check as an argument, and call it from
new access_ticab() and access_tocu() functions as appropriate for
each cache op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TTLBOS bit allows trapping on EL1
use of TLB maintenance instructions that operate on the
outer shareable domain:
TLBI VMALLE1OS, TLBI VAE1OS, TLBI ASIDE1OS,TLBI VAAE1OS,
TLBI VALE1OS, TLBI VAALE1OS, TLBI RVAE1OS, TLBI RVAAE1OS,
TLBI RVALE1OS, and TLBI RVAALE1OS.
(There are no AArch32 outer-shareable TLB maintenance ops.)
Implement the trapping.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For FEAT_EVT, the HCR_EL2.TTLBIS bit allows trapping on EL1 use of
TLB maintenance instructions that operate on the inner shareable
domain:
AArch64:
TLBI VMALLE1IS, TLBI VAE1IS, TLBI ASIDE1IS, TLBI VAAE1IS,
TLBI VALE1IS, TLBI VAALE1IS, TLBI RVAE1IS, TLBI RVAAE1IS,
TLBI RVALE1IS, and TLBI RVAALE1IS.
AArch32:
TLBIALLIS, TLBIMVAIS, TLBIASIDIS, TLBIMVAAIS, TLBIMVALIS,
and TLBIMVAALIS.
Add the trapping support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FEAT_EVT adds five new bits to the HCR_EL2 register: TTLBIS, TTLBOS,
TICAB, TOCU and TID4. These allow the guest to enable trapping of
various EL1 instructions to EL2. In this commit, add the necessary
code to allow the guest to set these bits if the feature is present;
because the bit is always zero when the feature isn't present we
won't need to use explicit feature checks in the "trap on condition"
tests in the following commits.
Note that although full implementation of the feature (mandatory from
Armv8.5 onward) requires all five trap bits, the ID registers permit
a value indicating that only TICAB, TOCU and TID4 are implemented,
which might be the case for CPUs between Armv8.2 and Armv8.5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Cortex-A55 is one of the newer armv8.2+ CPUs; in particular
it supports the Privileged Access Never (PAN) feature. Add
a model of this CPU, so you can use a CPU type on the virt
board that models a specific real hardware CPU, rather than
having to use the QEMU-specific "max" CPU type.
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Message-id: 20221121150819.2782817-1-tkutergin@gmail.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/machine*.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-16-armbru@redhat.com>
The LPA2 extension implements 52-bit virtual addressing for 4k and 16k
translation granules, and for the former, this means an additional level
of translation is needed. This means we start counting at -1 instead of
0 when doing a walk, and so 'level' is now a signed quantity, and should
be typed as such. So turn it from uint32_t into int32_t.
This avoids a level of -1 getting misinterpreted as being >= 3, and
terminating a page table walk prematurely with a bogus output address.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In get_phys_addr_with_struct(), we call get_phys_addr_twostage() if
the CPU supports EL2. However, we don't check here that stage 2 is
actually enabled. Instead we only check that inside
get_phys_addr_twostage() to skip stage 2 translation. This means
that even if stage 2 is disabled we still tell the stage 1 lookup to
do its page table walks via stage 2.
This works by luck for normal CPU accesses, but it breaks for debug
accesses, which are used by the disassembler and also by semihosting
file reads and writes, because the debug case takes a different code
path inside S1_ptw_translate().
This means that setups that use semihosting for file loads are broken
(a regression since 7.1, introduced in recent ptw refactoring), and
that sometimes disassembly in debug logs reports "unable to read
memory" rather than showing the guest insns.
Fix the bug by hoisting the "is stage 2 enabled?" check up to
get_phys_addr_with_struct(), so that we handle S2 disabled the same
way we do the "no EL2" case, with a simple single stage lookup.
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221121212404.1450382-1-peter.maydell@linaro.org
With LPA2, the effective output address size is at most 48 bits when
TCR.DS == 0. This case is currently unhandled in the page table walker,
where we happily assume LVA/64k granule when outputsize > 48 and
param.ds == 0, resulting in the wrong conversion to be used from a
page table descriptor to a physical address.
if (outputsize > 48) {
if (param.ds) {
descaddr |= extract64(descriptor, 8, 2) << 50;
} else {
descaddr |= extract64(descriptor, 12, 4) << 48;
}
So cap the outputsize to 48 when TCR.DS is cleared, as per the
architecture.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221116170316.259695-1-ardb@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reversed the sense of non-secure in get_phys_addr_lpae,
and failed to initialize attrs.secure for ARMMMUIdx_Phys_S.
Fixes: 48da29e4 ("target/arm: Add ptw_idx to S1Translate")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1293
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to check HCR_E2H and HCR_TGE to select the right MMU index for
the correct translation regime.
To check for EL2&0 translation regime:
- For S1E0*, S1E1* and S12E* ops, check both HCR_E2H and HCR_TGE
- For S1E2* ops, check only HCR_E2H
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-id: 20221101064250.12444-1-ake@igel.co.jp
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With odd_ofs set, we weren't copying enough data.
Fixes: 09eb6d7025 ("target/arm: Move sve zip high_ofs into simd_data")
Reported-by: Idan Horowitz <idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221031054144.3574-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we implemented the PAN support we theoretically wanted
to support it for both AArch32 and AArch64, but in practice
several bugs made it essentially unusable with an AArch32
guest. Fix all those problems:
- Use CPSR.PAN to check for PAN state in aarch32 mode
- throw permission fault during address translation when PAN is
enabled and kernel tries to access user acessible page
- ignore SCTLR_XP bit for armv7 and armv8 (conflicts with SCTLR_SPAN).
Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221027112619.2205229-1-tkutergin@gmail.com
[PMM: tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The HCR_EL2.TTLB bit is supposed to trap all EL1 execution of TLB
maintenance instructions. However we have added new TLB insns for
FEAT_TLBIOS and FEAT_TLBIRANGE, and forgot to set their accessfn to
access_ttlb. Add the missing accessfns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had only been reporting the stage2 page size. This causes
problems if stage1 is using a larger page size (16k, 2M, etc),
but stage2 is using a smaller page size, because cputlb does
not set large_page_{addr,mask} properly.
Fix by using the max of the two page sizes.
Reported-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the atomic update for hardware management of the dirty bit.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the atomic update for hardware management of the access flag.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-13-richard.henderson@linaro.org
[PMM: Fix accidental PROT_WRITE to PAGE_WRITE; add missing
main-loop.h include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace some gotos with some nested if statements.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both GP and DBM are in the upper attribute block.
Extend the computation of attrs to include them,
then simplify the setting of guarded.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leave the upper and lower attributes in the place they originate
from in the descriptor. Shifting them around is confusing, since
one cannot read the bit numbers out of the manual. Also, new
attributes have been added which would alter the shifts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221024051851.3074715-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always overriding fi->type was incorrect, as we would not properly
propagate the fault type from S1_ptw_translate, or arm_ldq_ptw.
Simplify things by providing a new label for a translation fault.
For other faults, store into fi directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The unconditional loop was used both to iterate over levels
and to control parsing of attributes. Use an explicit goto
in both cases.
While this appears less clean for iterating over levels, we
will need to jump back into the middle of this loop for
atomic updates, which is even uglier.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fault type is to be used with FEAT_HAFDBS when
the guest enables hw updates, but places the tables
in memory where atomic updates are unsupported.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Separate S1 translation from the actual lookup.
Will enable lpae hardware updates.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MMFR1 field may indicate support for hardware update of
access flag alone, or access flag and dirty bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist the computation of the mmu_idx for the ptw up to
get_phys_addr_with_struct and get_phys_addr_twostage.
This removes the duplicate check for stage2 disabled
from the middle of the walk, performing it only once.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reduce the amount of typing required for this check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An exception targeting EL2 from lower EL is actually maskable when
HCR_E2H and HCR_TGE are both set. This applies to both secure and
non-secure Security state.
We can remove the conditions that try to suppress masking of
interrupts when we are Secure and the exception targets EL2 and
Secure EL2 is disabled. This is OK because in that situation
arm_phys_excp_target_el() will never return 2 as the target EL. The
'not if secure' check in this function was originally written before
arm_hcr_el2_eff(), and back then the target EL returned by
arm_phys_excp_target_el() could be 2 even if we were in Secure
EL0/EL1; but it is no longer needed.
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-id: 20221017092432.546881-1-ake@igel.co.jp
[PMM: Add commit message paragraph explaining why it's OK to
remove the checks on secure and SCR_EEL2]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_E0PD adds new bits E0PD0 and E0PD1 to TCR_EL1, which allow the
OS to forbid EL0 access to half of the address space. Since this is
an EL0-specific variation on the existing TCR_ELx.{EPD0,EPD1}, we can
implement it entirely in aa64_va_parameters().
This requires moving the existing regime_is_user() to internals.h
so that the code in helper.c can get at it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221021160131.3531787-1-peter.maydell@linaro.org
Since the only user, Arm MTE, always requires allocation,
merge the get and alloc functions to always produce a
non-null result. Also assume that the user has already
checked page validity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a constant target data allocation size for all pages.
This will be necessary to reduce overhead of page tracking.
Since TARGET_PAGE_DATA_SIZE is now required, we can use this
to omit data tracking for targets that don't require it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Since we always pass dc->pc_curr, fold the arithmetic to zero displacement.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on
absolute values by passing in pc difference.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A simple helper to retrieve the length of the current insn.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The return type of the functions is already bool, but in a few
instances we used an integer type with the return statement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So far, limit the change to S1_ptw_translate, arm_ldl_ptw, and
arm_ldq_ptw. Use probe_access_full to find the host address,
and if so use a host load. If the probe fails, we've got our
fault info already. On the off chance that page tables are not
in RAM, continue to use the address_space_ld* functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist this test out of arm_ld[lq]_ptw into S1_ptw_translate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before using softmmu page tables for the ptw, plumb down
a debug parameter so that we can query page table entries
from gdbstub without modifying cpu state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Consolidate most of the inputs and outputs of S1_ptw_translate
into a single structure. Plumb this through arm_ld*_ptw from
the controlling get_phys_addr_* routine.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compare only the VMID field when considering whether we need to flush.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We had been marking this ARM_MMU_IDX_NOTLB, move it to a real tlb.
Flush the tlb when invalidating stage 1+2 translations. Re-use
alle1_tlbmask() for other instances of EL1&0 + Stage2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not yet used, but add mmu indexes for 1-1 mapping
to physical addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a field to TARGET_PAGE_ENTRY_EXTRA to hold the guarded bit.
In is_guarded_page, use probe_access_full instead of just guessing
that the tlb entry is still present. Also handles the FIXME about
executing from device memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUTLBEntryFull structure now stores the original pte attributes, as
well as the physical address. Therefore, we no longer need a separate
bit in MemTxAttrs, nor do we need to walk the tree of memory regions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Copy attrs and shareability, into the TLB. This will eventually
be used by S1_ptw_translate to report stage1 translation failures,
and by do_ats_write to fill in PAR_EL1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU doesn't model micro-architectural details which includes most
chip errata. The ARM_ERRATA_798181 work around in the Linux
kernel (see erratum_a15_798181_init) currently detects QEMU's
cortex-a15 as broken and triggers additional expensive TLB flushes as
a result.
Change the MIDR to report what the latest silicon would (r4p0). We
explicitly set the IMPDEF revidr bits to 0 because we don't need to
set anything other than the silicon revision to indicate these flushes
are not needed. This cuts about 5s from my Debian kernel boot with the
latest 6.0rc1 kernel (29s->24s).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Message-id: 20221010153225.506394-1-alex.bennee@linaro.org
Cc: Arnd Bergmann <arnd@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Message-Id: <20220906172257.2776521-1-alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we have an enum for the granule size, use it in the
ARMVAParameters struct instead of the using16k/using64k bools.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221003162315.2833797-3-peter.maydell@linaro.org
Arm CPUs support some subset of the granule (page) sizes 4K, 16K and
64K. The guest selects the one it wants using bits in the TCR_ELx
registers. If it tries to program these registers with a value that
is either reserved or which requests a size that the CPU does not
implement, the architecture requires that the CPU behaves as if the
field was programmed to some size that has been implemented.
Currently we don't implement this, and instead let the guest use any
granule size, even if the CPU ID register fields say it isn't
present.
Make aa64_va_parameters() check against the supported granule size
and force use of a different one if it is not implemented.
(A subsequent commit will make ARMVAParameters use the new enum
rather than the current pair of using16k/using64k bools.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221003162315.2833797-2-peter.maydell@linaro.org
Adjust GetPhysAddrResult to fill in CPUTLBEntryFull,
so that it may be passed directly to tlb_set_page_full.
The change is large, but mostly mechanical. The major
non-mechanical change is page_size -> lg_page_size.
Most of the time this is obvious, and is related to
TARGET_PAGE_BITS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221001162318.153420-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not apply memattr or shareability for Stage2 translations.
Make sure to apply HCR_{DC,DCT} only to Regime_EL10, per the
pseudocode in AArch64.S1DisabledOutput.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221001162318.153420-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use arm_hcr_el2_eff_secstate instead of arm_hcr_el2_eff, so
that we use is_secure instead of the current security state.
These AT* operations have been broken since arm_hcr_el2_eff
gained a check for "el2 enabled" for Secure EL2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These subroutines did not need ENV for anything except
retrieving the effective value of HCR anyway.
We have computed the effective value of HCR in the callers,
and this will be especially important for interpreting HCR
in a non-current security state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This value is unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221001162318.153420-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the argument to is_secure_ptr, and introduce a
local variable is_secure with the value. We only write
back to the pointer toward the end of the function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For page walking, we may require HCR for a security state
that is not "current".
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The effect of TGE does not only apply to non-secure state,
now that Secure EL2 exists.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a switch on mmu_idx for the a-profile indexes, instead of
three different if's vs regime_el and arm_mmu_idx_is_stage1_of_2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For a-profile aarch64, which does not bank system registers, it takes
quite a lot of code to switch between security states. In the process,
registers such as TCR_EL{1,2} must be swapped, which in itself requires
the flushing of softmmu tlbs. Therefore it doesn't buy us anything to
separate tlbs by security state.
Retain the distinction between Stage2 and Stage2_S.
This will be important as we implement FEAT_RME, and do not wish to
add a third set of mmu indexes for Realm state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use get_phys_addr_with_secure directly. For a-profile, this is the
one place where the value of is_secure may not equal arm_is_secure(env).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the last use of regime_is_secure; remove it
entirely before changing the layout of ARMMMUIdx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the use of regime_is_secure from arm_tr_init_disas_context.
Instead, provide the value of v8m_secure directly from tb_flags.
Rather than use regime_is_secure, use the env->v7m.secure directly,
as per arm_mmu_idx_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the use of regime_is_secure from v7m_read_half_insn, using
the new parameter instead.
As it happens, both callers pass true, propagated from the argument
to arm_v7m_mmu_idx_for_secstate which created the mmu_idx argument,
but that is a detail of v7m_handle_execute_nsc we need not expose
to the callee.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Retain the existing get_phys_addr interface using the security
state derived from mmu_idx. Move the kerneldoc comments to the
header file where they belong.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the use of regime_is_secure from regime_translation_disabled,
using the new parameter instead.
This fixes a bug in S1_ptw_translate and get_phys_addr where we had
passed ARMMMUIdx_Stage2 and not ARMMMUIdx_Stage2_S to determine if
Stage2 is disabled, affecting FEAT_SEL2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the correct stage2 mmu_idx to regime_translation_disabled,
which we computed afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221001162318.153420-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the use of regime_is_secure from get_phys_addr_lpae,
using the new parameter instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the stage2 call to get_phys_addr_lpae should never set
attrs.secure when given a non-secure input, it's just as easy
to make the final update to attrs.secure be unconditional and
false in the case of non-secure input.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221007152159.1414065-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The starting security state comes with the translation regime,
not the current state of arm_is_secure_below_el3().
Create a new local variable, s2walk_secure, which does not need
to be written back to result->attrs.secure -- we compute that
value later, after the S2 walk is complete.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221001162318.153420-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Updates write_scr() to allow setting SCR_EL3.EnTP2 when FEAT_SME is
implemented. SCR_EL3 being a 64-bit register, valid_mask is changed
to uint64_t and the SCR_* constants in target/arm/cpu.h are extended
to 64-bit so that masking and bitwise not (~) behave as expected.
This enables booting Linux with Trusted Firmware-A at EL3 with
"-M virt,secure=on -cpu max".
Cc: qemu-stable@nongnu.org
Fixes: 78cb977666 ("target/arm: Enable SME for -cpu max")
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221004072354.27037-1-jerome.forissier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Occasionally the KVM_CREATE_VM ioctl can return EINTR, even though
there is no pending signal to be taken. In commit 94ccff1338
we added a retry-on-EINTR loop to the KVM_CREATE_VM call in the
generic KVM code. Adopt the same approach for the use of the
ioctl in the Arm-specific KVM code (where we use it to create a
scratch VM for probing for various things).
For more information, see the mailing list thread:
https://lore.kernel.org/qemu-devel/8735e0s1zw.wl-maz@kernel.org/
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-id: 20220930113824.1933293-1-peter.maydell@linaro.org
Several hypervisor capabilities in KVM are target-specific. When exposed
to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they
should not be available for all targets.
Add a hook for targets to add their own properties to -accel kvm, for
now no such property is defined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220929072014.20705-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's always better to convey the type of a pointer if at all
possible. So let's add the DumpState typedef to typedefs.h and move
the dump note functions from the opaque pointers to DumpState
pointers.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Cédric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: Alistair Francis <alistair.francis@wdc.com>
CC: Bin Meng <bin.meng@windriver.com>
CC: Cornelia Huck <cohuck@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Richard Henderson <richard.henderson@linaro.org>
CC: David Hildenbrand <david@redhat.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220811121111.9878-2-frankja@linux.ibm.com>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This structure will shortly contain more than just
data for accessing MMIO. Rename the 'addr' member
to 'xlat_section' to more clearly indicate its purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
SP_EL1 must be kept when EL3 is present but EL2 is not. Therefore mark
it with ARM_CP_EL3_NO_EL2_KEEP.
Cc: qemu-stable@nongnu.org
Fixes: 696ba37718 ("target/arm: Handle cpreg registration for missing EL")
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220927120058.670901-1-jerome.forissier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cpu64.c has ended up in a slightly odd order -- it starts with the
initfns for most of the models-real-hardware CPUs; after that comes a
bunch of support code for SVE, SME, pauth and LPA2 properties. Then
come the initfns for the 'host' and 'max' CPU types, and then after
that one more models-real-hardware CPU initfn, for a64fx. (This
ordering is partly historical and partly required because a64fx needs
the SVE properties.)
Reorder the file into:
* CPU property support functions
* initfns for real hardware CPUs
* initfns for host and max
* class boilerplate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Our SDCR_VALID_MASK doesn't include all of the bits which are defined
by the current architecture. In particular in commit 0b42f4fab9 we
forgot to add SCCD, which meant that an AArch32 guest couldn't
actually use the SCCD bit to disable counting in Secure state.
Add all the currently defined bits; we don't implement all of them,
but this makes them be reads-as-written, which is architecturally
valid and matches how we currently handle most of the others in the
mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-4-peter.maydell@linaro.org
In commit 01765386a8 we fixed a bug where we weren't correctly
bracketing changes to some registers with pmu_op_start() and
pmu_op_finish() calls for changes which affect whether the PMU
counters might be enabled. However, we missed the case of writes to
the AArch64 MDCR_EL3 register, because (unlike its AArch32
counterpart) they are currently done directly to the CPU state struct
without going through the sdcr_write() function.
Give MDCR_EL3 a writefn which handles the PMU start/finish calls.
The SDCR writefn then simplfies to "call the MDCR_EL3 writefn after
masking off the bits which don't exist in the AArch32 register".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-3-peter.maydell@linaro.org
