The guarded bit comes from the stage1 walk.
Fixes: Coverity CID 1507929
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230407185149.3253946-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only perform the extract of GP during the stage1 walk.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230407185149.3253946-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 049edada we added some code to handle HSTR_EL2 traps, which
we did as an inline "conditionally branch over a
gen_exception_insn()". Unfortunately this fails to take account of
the fact that gen_exception_insn() will set s->base.is_jmp to
DISAS_NORETURN. That means that at the end of the TB we won't
generate the necessary code to handle the "branched over the trap and
continued normal execution" codepath. The result is that the TCG
main loop thinks that we stopped execution of the TB due to a
situation that only happens when icount is enabled, and hits an
assertion. Explicitly set is_jmp back to DISAS_NEXT so we generate
the correct code for when execution continues past this insn.
Note that this only happens for cpreg reads; writes will call
gen_lookup_tb() which generates a valid end-of-TB.
Fixes: 049edada ("target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1551
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230330101900.2320380-1-peter.maydell@linaro.org
aarch64_gdb_get_pauth_reg() -- although disabled since commit
5787d17a42 ("target/arm: Don't advertise aarch64-pauth.xml to
gdb") is still compiled in. It calls pauth_ptr_mask() which is
located in target/arm/tcg/pauth_helper.c, a TCG specific helper.
To avoid a linking error when TCG is not enabled:
Undefined symbols for architecture arm64:
"_pauth_ptr_mask", referenced from:
_aarch64_gdb_get_pauth_reg in target_arm_gdbstub64.c.o
ld: symbol(s) not found for architecture arm64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
- Inline pauth_ptr_mask() in aarch64_gdb_get_pauth_reg()
(this is the single user),
- Rename pauth_ptr_mask_internal() as pauth_ptr_mask() and
inline it in "internals.h",
Fixes: e995d5cce4 ("target/arm: Implement gdbstub pauth extension")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230328212516.29592-1-philmd@linaro.org
[PMM: reinstated doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both cpu_check_watchpoint() and cpu_watchpoint_address_matches()
are specific to TCG system emulation. Declare them in "tcg-cpu-ops.h"
to be sure accessing them from non-TCG code is a compilation error.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230328173117.15226-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cortex-M profile is only emulable from TCG accelerator. Restrict
the GDBstub features to its availability in order to avoid a link
error when TCG is not enabled:
Undefined symbols for architecture arm64:
"_arm_v7m_get_sp_ptr", referenced from:
_m_sysreg_get in target_arm_gdbstub.c.o
"_arm_v7m_mrs_control", referenced from:
_arm_gdb_get_m_systemreg in target_arm_gdbstub.c.o
ld: symbol(s) not found for architecture arm64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Fixes: 7d8b28b8b5 ("target/arm: Implement gdbstub m-profile systemreg and secext")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230322142902.69511-3-philmd@linaro.org
[PMM: add #include since I cherry-picked this patch from the series]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unfortunately a bug in older versions of gdb means that they will
crash if QEMU sends them the aarch64-pauth.xml. This bug is fixed in
gdb commit 1ba3a3222039eb25, and there are plans to backport that to
affected gdb release branches, but since the bug affects gdb 9
through 12 it is very widely deployed (for instance by distros).
It is not currently clear what the best way to deal with this is; it
has been proposed to define a new XML feature name that old gdb will
ignore but newer gdb can handle. Since QEMU's 8.0 release is
imminent and at least one of our CI runners is now falling over this,
disable the pauth XML for the moment. We can follow up with a more
considered fix either in time for 8.0 or else for the 8.1 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add implementation defined registers for neoverse-n1 which
would be accessed by TF-A. Since there is no DSU in Qemu,
CPUCFR_EL1.SCU bit is set to 1 to avoid DSU registers definition.
Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230313033936.585669-1-chenbaozi@phytium.com.cn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here it is not trivial to notice first initialization, so explicitly
zero the temps. Use an array for the output, rather than separate
tcg_rd/tcg_rd_hi variables.
Fixes a bug by adding a missing clear_vec_high.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is easy enough to use mov instead of or-with-zero
and relying on the optimizer to fold away the or.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is easy enough to use mov instead of or-with-zero and relying
on the optimizer to fold away the or. Use an array for the output,
rather than separate tcg_res{l,h} variables.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses are in the context of an accumulator conditionally
having a zero input. Split the rda variable to rda_{i,o},
and set rda_i to tcg_constant_foo(0) when required.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This hides the implicit initialization of a variable.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg temporary usage so that we can use tcg_constant_i32.
tcg_gen_deposit_i32 already has a width == 32 special case,
so remove the check here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out common subroutines for handing rounding mode
changes during translation. Use tcg_constant_i32 and
tcg_temp_new_i32 instead of tcg_const_i32.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for extracting new helpers, ensure that
the rounding mode is represented as ARMFPRounding and
not FloatRoundMode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use proper enumeration types for input and output.
Use a const array to perform the mapping, with an
assert that the input is valid.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While this enumerator has been present since the first commit,
it isn't ever used. The first actual use of round-to-odd came
with SVE, which currently uses float_round_to_odd instead of
the arm-specific enumerator.
Amusingly, the comment about unhandled TIEAWAY has been
out of date since the initial commit of translate-a64.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize rmode to -1 instead of keeping two variables.
This is already used elsewhere in translate-a64.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230306175230.7110-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
Integrate neighboring code from get_phys_addr_lpae which computed
starting level, as it is easier to validate when doing both at the
same time. Mirror the checks at the start of AArch{64,32}.S2Walk,
especially S2InvalidSL and S2InconsistentSL.
This reverts 49ba115bb7, which was incorrect -- there is nothing
in the ARM pseudocode that depends on TxSZ, i.e. outputsize; the
pseudocode is consistent in referencing PAMax.
Fixes: 49ba115bb7 ("target/arm: Pass outputsize down to check_s2_mmu_setup")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227225832.816605-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In several places we use arm_is_secure_below_el3 and
arm_is_el3_or_mon separately from arm_is_secure.
These functions make no sense for m-profile, and
would indicate prior incorrect feature testing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227225832.816605-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
M-profile doesn't have HCR_EL2. While we could test features
before each call, zero is a generally safe return value to
disable the code in the caller. This test is required to
avoid an assert in arm_is_secure_below_el3.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227225832.816605-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The upstream gdb xml only implements {MSP,PSP}{,_NS,S}, but
go ahead and implement the other system registers as well.
Since there is significant overlap between the two, implement
them with common code. The only exception is the systemreg
view of CONTROL, which merges the banked bits as per MRS.
Signed-off-by: David Reiss <dreiss@meta.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-15-richard.henderson@linaro.org
[rth: Substatial rewrite using enumerator and shared code.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the function to be used outside of m_helper.c.
Move to be outside of ifndef CONFIG_USER_ONLY block.
Rename from get_v7m_sp_ptr.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Reiss <dreiss@meta.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-14-richard.henderson@linaro.org
[rth: Split out of a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the function to be used outside of m_helper.c.
Rename with an "arm_" prefix.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Reiss <dreiss@meta.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-13-richard.henderson@linaro.org
[rth: Split out of a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The extension is primarily defined by the Linux kernel NT_ARM_PAC_MASK
ptrace register set.
The original gdb feature consists of two masks, data and code, which are
used to mask out the authentication code within a pointer. Following
discussion with Luis Machado, add two more masks in order to support
pointers within the high half of the address space (i.e. TTBR1 vs TTBR0).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1105
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Keep the logic for pauth within pauth_helper.c, and expose
a helper function for use with the gdbstub pac extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Order suf[] by the log8 of the width.
Use ARRAY_SIZE instead of hard-coding 128.
This changes the order of the union definitions,
but retains the order of the union-of-union members.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will make the function usable between SVE and SME.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define svep based on the size of the predicates,
not the primary vector registers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than increment base_reg and num, compute num from the change
to base_reg at the end. Clean up some nearby comments.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a subroutine for creating the union of unions
of the various type sizes that a vector may contain.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is only used for aarch64, so move it to the
file that has the other aarch64 gdbstub stuff. Move the
declaration to internals.h.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is not used outside gdbstub.c.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the form of the function names between fp and sve the same:
- arm_gdb_*_svereg -> aarch64_gdb_*_sve_reg.
- aarch64_fpu_gdb_*_reg -> aarch64_gdb_*_fpu_reg.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227213329.793795-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only the use within cpu_reg requires a writable temp,
so inline new_tmp_a64_zero there. All other uses are
fine with a constant temp, so use tcg_constant_i64(0).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now a simple wrapper for tcg_temp_new_i64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
