Implement the MVE shift-vector-left-by-immediate insns VSHL, VQSHL
and VQSHLU.
The size-and-immediate encoding here is the same as Neon, and we
handle it the same way neon-dp.decode does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-8-peter.maydell@linaro.org
Implement the MVE logical-immediate insns (VMOV, VMVN,
VORR and VBIC). These have essentially the same encoding
as their Neon equivalents, and we implement the decode
in the same way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-7-peter.maydell@linaro.org
Use dup_const() instead of bitfield_replicate() in
disas_simd_mod_imm().
(We can't replace the other use of bitfield_replicate() in this file,
in logic_imm_decode_wmask(), because that location needs to handle 2
and 4 bit elements, which dup_const() cannot.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-6-peter.maydell@linaro.org
The A64 AdvSIMD modified-immediate grouping uses almost the same
constant encoding that A32 Neon does; reuse asimd_imm_const() (to
which we add the AArch64-specific case for cmode 15 op 1) instead of
reimplementing it all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-5-peter.maydell@linaro.org
The function asimd_imm_const() in translate-neon.c is an
implementation of the pseudocode AdvSIMDExpandImm(), which we will
also want for MVE. Move the implementation to translate.c, with a
prototype in translate.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-4-peter.maydell@linaro.org
The initial implementation of the MVE VRMLALDAVH and VRMLSLDAVH
insns had some bugs:
* the 32x32 multiply of elements was being done as 32x32->32,
not 32x32->64
* we were incorrectly maintaining the accumulator in its full
72-bit form across all 4 beats of the insn; in the pseudocode
it is squashed back into the 64 bits of the RdaHi:RdaLo
registers after each beat
In particular, fixing the second of these allows us to recast
the implementation to avoid 128-bit arithmetic entirely.
Since the element size here is always 4, we can also drop the
parameterization of ESIZE to make the code a little more readable.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-3-peter.maydell@linaro.org
In do_ldst(), the calculation of the offset needs to be based on the
size of the memory access, not the size of the elements in the
vector. This meant we were getting it wrong for the widening and
narrowing variants of the various VLDR and VSTR insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210628135835.6690-2-peter.maydell@linaro.org
If the CPU is running in default NaN mode (FPCR.DN == 1) and we execute
FRSQRTE, FRECPE, or FRECPX with a signaling NaN, parts_silence_nan_frac() will
assert due to fpst->default_nan_mode being set.
To avoid this, we check to see what NaN mode we're running in before we call
floatxx_silence_nan().
Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1624662174-175828-2-git-send-email-joe.komlodi@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The new bswap flags can implement the semantics exactly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can eliminate the requirement for a zero-extended output,
because the following store will ignore any garbage high bits.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For the sf version, we are performing two 32-bit bswaps
in either half of the register. This is equivalent to
performing one 64-bit bswap followed by a rotate.
For the non-sf version, we can remove TCG_BSWAP_IZ
and the preceding zero-extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
MTE3 introduces an asymmetric tag checking mode, in which loads are
checked synchronously and stores are checked asynchronously. Add
support for it.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210616195614.11785-1-pcc@google.com
[PMM: Add line to emulation.rst]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In a CPU with MVE, the VMOV (vector lane to general-purpose register)
and VMOV (general-purpose register to vector lane) insns are not
predicated, but they are subject to beatwise execution if they
are not in an IT block.
Since our implementation always executes all 4 beats in one tick,
this means only that we need to handle PSR.ECI:
* we must do the usual check for bad ECI state
* we must advance ECI state if the insn succeeds
* if ECI says we should not be executing the beat corresponding
to the lane of the vector register being accessed then we
should skip performing the move
Note that if PSR.ECI is non-zero then we cannot be in an IT block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-45-peter.maydell@linaro.org
Implement the MVE VADDV insn, which performs an addition
across vector lanes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-44-peter.maydell@linaro.org
Implement the MVE VHCADD insn, which is similar to VCADD
but performs a halving step. This one overlaps with VADC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-43-peter.maydell@linaro.org
Implement the MVE VCADD insn, which performs a complex add with
rotate. Note that the size=0b11 encoding is VSBC.
The architecture grants some leeway for the "destination and Vm
source overlap" case for the size MO_32 case, but we choose not to
make use of it, instead always calculating all 16 bytes worth of
results before setting the destination register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-42-peter.maydell@linaro.org
Implement the MVE VADC and VSBC insns. These perform an
add-with-carry or subtract-with-carry of the 32-bit elements in each
lane of the input vectors, where the carry-out of each add is the
carry-in of the next. The initial carry input is either 1 or is from
FPSCR.C; the carry out at the end is written back to FPSCR.C.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-41-peter.maydell@linaro.org
Implement the MVE VRHADD insn, which performs a rounded halving
addition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-40-peter.maydell@linaro.org
Implement the vector form of the MVE VQDMULL insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-39-peter.maydell@linaro.org
Implement the MVE VQDMLSDH and VQRDMLSDH insns, which are
like VQDMLADH and VQRDMLADH except that products are subtracted
rather than added.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-38-peter.maydell@linaro.org
Implement the MVE VQDMLADH and VQRDMLADH insns. These multiply
elements, and then add pairs of products, double, possibly round,
saturate and return the high half of the result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-37-peter.maydell@linaro.org
Implement the MV VQRSHL (vector) insn. Again, the code to perform
the actual shifts is borrowed from neon_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-34-peter.maydell@linaro.org
Implement the MVE VQSHL insn (encoding T4, which is the
vector-shift-by-vector version).
The DO_SQSHL_OP and DO_UQSHL_OP macros here are derived from
the neon_helper.c code for qshl_u{8,16,32} and qshl_s{8,16,32}.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-33-peter.maydell@linaro.org
Implement the vector forms of the MVE VQADD and VQSUB insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-32-peter.maydell@linaro.org
Implement the vector forms of the MVE VQDMULH and VQRDMULH insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-31-peter.maydell@linaro.org
Implement the MVE VQDMULL scalar insn. This multiplies the top or
bottom half of each element by the scalar, doubles and saturates
to a double-width result.
Note that this encoding overlaps with VQADD and VQSUB; it uses
what in VQADD and VQSUB would be the 'size=0b11' encoding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-30-peter.maydell@linaro.org
Implement the MVE VQDMULH and VQRDMULH scalar insns, which multiply
elements by the scalar, double, possibly round, take the high half
and saturate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-29-peter.maydell@linaro.org
Implement the MVE VQADD and VQSUB insns, which perform saturating
addition of a scalar to each element. Note that individual bytes of
each result element are used or discarded according to the predicate
mask, but FPSCR.QC is only set if the predicate mask for the lowest
byte of the element is set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-28-peter.maydell@linaro.org
Implement the MVE VPST insn, which sets the predicate mask
fields in the VPR to the immediate value encoded in the insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-27-peter.maydell@linaro.org
Implement the MVE VBRSR insn, which reverses a specified
number of bits in each element, setting the rest to zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-26-peter.maydell@linaro.org
Implement the scalar variants of the MVE VHADD and VHSUB insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-25-peter.maydell@linaro.org
Implement the scalar forms of the MVE VSUB and VMUL insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-24-peter.maydell@linaro.org
Implement the scalar form of the MVE VADD insn. This takes the
scalar operand from a general purpose register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-23-peter.maydell@linaro.org
Implement the MVE VRMLALDAVH and VRMLSLDAVH insns, which accumulate
the results of a rounded multiply of pairs of elements into a 72-bit
accumulator, returning the top 64 bits in a pair of general purpose
registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-22-peter.maydell@linaro.org
Implement the MVE insn VMLSLDAV, which multiplies source elements,
alternately adding and subtracting them, and accumulates into a
64-bit result in a pair of general purpose registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-21-peter.maydell@linaro.org
Implement the MVE VMLALDAV insn, which multiplies pairs of integer
elements, accumulating them into a 64-bit result in a pair of
general-purpose registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-20-peter.maydell@linaro.org
Implement the MVE VMULL insn, which multiplies two single
width integer elements to produce a double width result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-19-peter.maydell@linaro.org
Implement MVE VHADD and VHSUB insns, which perform an addition
or subtraction and then halve the result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-18-peter.maydell@linaro.org
Implement the MVE VABD insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-17-peter.maydell@linaro.org
Implement the MVE VMAX and VMIN insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-16-peter.maydell@linaro.org
Implement the MVE VRMULH insn, which performs a rounding multiply
and then returns the high half.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-15-peter.maydell@linaro.org
Implement the MVE VMULH insn, which performs a vector
multiply and returns the high half of the result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-14-peter.maydell@linaro.org
Implement the MVE VADD, VSUB and VMUL insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-13-peter.maydell@linaro.org
Implement the MVE vector logical operations operating
on two registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-12-peter.maydell@linaro.org
Implement the MVE VDUP insn, which duplicates a value from
a general-purpose register into every lane of a vector
register (subject to predication).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-11-peter.maydell@linaro.org
Implement the MVE VNEG insn (both integer and floating point forms).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-9-peter.maydell@linaro.org
Implement the MVE VABS functions (both integer and floating point).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-8-peter.maydell@linaro.org
Implement the MVE VMVN(register) operation. Note that for
predication this operation is byte-by-byte.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-7-peter.maydell@linaro.org
Implement the MVE instructions VREV16, VREV32 and VREV64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-6-peter.maydell@linaro.org
Implement the MVE VCLS insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-5-peter.maydell@linaro.org
Implement the MVE VCLZ insn (and the necessary machinery
for MVE 1-input vector ops).
Note that for non-load instructions predication is always performed
at a byte level granularity regardless of element size (R_ZLSJ),
and so the masking logic here differs from that used in the VLDR
and VSTR helpers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-4-peter.maydell@linaro.org
Implement the variants of MVE VLDR (encodings T1, T2) which perform
"widening" loads where bytes or halfwords are loaded from memory and
zero or sign-extended into halfword or word length vector elements,
and the narrowing MVE VSTR (encodings T1, T2) where bytes or
halfwords are stored from halfword or word elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-3-peter.maydell@linaro.org
Implement the forms of the MVE VLDR and VSTR insns which perform
non-widening loads of bytes, halfwords or words from memory into
vector elements of the same width (encodings T5, T6, T7).
(At the moment we know for MVE and M-profile in general that
vfp_access_check() can never return false, but we include the
conventional return-true-on-failure check for consistency
with non-M-profile translation code.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-2-peter.maydell@linaro.org
Instead of open-coding the "take NOCP exception if FPU disabled,
otherwise call gen_preserve_fp_state()" code in the accessors for
FPCXT_NS, add an argument to vfp_access_check_m() which tells it to
skip the gen_update_fp_context() call, so we can use it for the
FPCXT_NS case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-8-peter.maydell@linaro.org
vfp_access_check and its helper routine full_vfp_access_check() has
gradually grown and is now an awkward mix of A-profile only and
M-profile only pieces. Refactor it into an A-profile only and an
M-profile only version, taking advantage of the fact that now the
only direct call to full_vfp_access_check() is in A-profile-only
code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-7-peter.maydell@linaro.org
Factor the code in full_vfp_access_check() which updates the
ownership of the FP context and creates a new FP context
out into its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-6-peter.maydell@linaro.org
A few subcases of VLDR/VSTR sysreg succeed but do not perform a
memory access:
* VSTR of VPR when unprivileged
* VLDR to VPR when unprivileged
* VLDR to FPCXT_NS when fpInactive
In these cases, even though we don't do the memory access we should
still update the base register and perform the stack limit check if
the insn's addressing mode specifies writeback. Our implementation
failed to do this, because we handle these side-effects inside the
memory_to_fp_sysreg() and fp_sysreg_to_memory() callback functions,
which are only called if there's something to load or store.
Fix this by adding an extra argument to the callbacks which is set to
true to actually perform the access and false to only do side effects
like writeback, and calling the callback with do_access = false
for the three cases listed above.
This produces slightly suboptimal code for the case of a write
to FPCXT_NS when the FPU is inactive and the insn didn't have
side effects (ie no writeback, or via VMSR), in which case we'll
generate a conditional branch over an unconditional branch.
But this doesn't seem to be important enough to merit requiring
the callback to report back whether it generated any code or not.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-5-peter.maydell@linaro.org
The M-profile architecture requires that accesses to FPCXT_NS when
there is no active FP state must not take a NOCP fault even if the
FPU is disabled. We were not implementing this correctly, because
in our decode we catch the NOCP faults early in m-nocp.decode.
Fix this bug by moving all the handling of M-profile FP system
register accesses from vfp.decode into m-nocp.decode and putting
it above the NOCP blocks. This provides the correct behaviour:
* for accesses other than FPCXT_NS the trans functions call
vfp_access_check(), which will check for FPU disabled and
raise a NOCP exception if necessary
* for FPCXT_NS we have the special case code that doesn't
call vfp_access_check()
* when these trans functions want to raise an UNDEF they return
false, so the decoder will fall through into the NOCP blocks.
This means that NOCP correctly takes precedence over UNDEF
for these insns. (This is a difference from the other insns
handled by m-nocp.decode, where UNDEF takes precedence and
which we implement by having those trans functions call
unallocated_encoding() in the appropriate places.)
[Note for backport to stable: this commit has a semantic dependency
on commit 9a486856e9, which was not marked as cc-stable because
we didn't know we'd need it for a for-stable bugfix.]
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-4-peter.maydell@linaro.org
If the guest makes an FPCXT_NS access when the FPU is disabled,
one of two things happens:
* if there is no active FP context, then the insn behaves the
same way as if the FPU was enabled: writes ignored, reads
same value as FPDSCR_NS
* if there is an active FP context, then we take a NOCP
exception
Add code to the sysreg read/write functions which emits
code to take the NOCP exception in the latter case.
At the moment this will never be used, because the NOCP checks in
m-nocp.decode happen first, and so the trans functions are never
called when the FPU is disabled. The code will be needed when we
move the sysreg access insns to before the NOCP patterns in the
following commit.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-3-peter.maydell@linaro.org
In the code for handling VFP system register accesses there is some
stray whitespace after a unary '-' operator, and also some incorrect
indent in a couple of function prototypes. We're about to move this
code to another file, so fix the code style issues first so
checkpatch doesn't complain about the code-movement patch.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210618141019.10671-2-peter.maydell@linaro.org
The virt_is_acpi_enabled() function is specific to the virt board, as
is the check for its 'ras' property. Use the new acpi_ghes_present()
function to check whether we should report memory errors via
acpi_ghes_record_errors().
This avoids a link error if QEMU was built without support for the
virt board, and provides a mechanism that can be used by any future
board models that want to add ACPI memory error reporting support
(they only need to call acpi_ghes_add_fw_cfg()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-4-peter.maydell@linaro.org
Currently the ARM SVE helper code defines locally some utility
functions for swapping 16-bit halfwords within 32-bit or 64-bit
values and for swapping 32-bit words within 64-bit values,
parallel to the byte-swapping bswap16/32/64 functions.
We want these also for the ARM MVE code, and they're potentially
generally useful for other targets, so move them to bitops.h.
(We don't put them in bswap.h with the bswap* functions because
they are implemented in terms of the rotate operations also
defined in bitops.h, and including bitops.h from bswap.h seems
better avoided.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-17-peter.maydell@linaro.org
For MVE, we want to re-use the large data table from expand_pred_b().
Move the data table to vec_helper.c so it is no longer in an SVE
specific source file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-14-peter.maydell@linaro.org
Add the framework for decoding MVE insns, with the necessary new
files and the meson.build rules, but no actual content yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-11-peter.maydell@linaro.org
Implement the MVE LETP insn. This is like the existing LE loop-end
insn, but it must perform an FPU-enabled check, and on loop-exit it
resets LTPSIZE to 4.
To accommodate the requirement to do something on loop-exit, we drop
the use of condlabel and instead manage both the TB exits manually,
in the same way we already do in trans_WLS().
The other MVE-specific change to the LE insn is that we must raise an
INVSTATE UsageFault insn if LTPSIZE is not 4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-10-peter.maydell@linaro.org
Implement the MVE DLSTP insn; this is like the existing DLS
insn, except that it must do an FPU access check and it
sets LTPSIZE to the value specified in the insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-9-peter.maydell@linaro.org
Implement the MVE WLSTP insn; this is like the existing WLS insn,
except that it specifies a size value which is used to set
FPSCR.LTPSIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-8-peter.maydell@linaro.org
Implement the MVE LCTP instruction.
We put its decode and implementation with the other
low-overhead-branch insns because although it is only present if MVE
is implemented it is logically in the same group as the other LOB
insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-7-peter.maydell@linaro.org
In commit a3494d4671 we reworked the M-profile handling of its
checks for when the NOCP exception should be raised because the FPU
is disabled, so that (in line with the architecture) the NOCP check
is done early over a large range of the encoding space, and takes
precedence over UNDEF exceptions. As part of this, we removed the
code from full_vfp_access_check() which raised an exception there for
M-profile with the FPU disabled, because it was no longer reachable.
For MVE, some instructions which are outside the "coprocessor space"
region of the encoding space must nonetheless do "is the FPU enabled"
checks and possibly raise a NOCP exception. (In particular this
covers the MVE-specific low-overhead branch insns LCTP, DLSTP and
WLSTP.) To support these insns, reinstate the code in
full_vfp_access_check(), so that their trans functions can call
vfp_access_check() and get the correct behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-6-peter.maydell@linaro.org
On A-profile, PSR bits [15:10][26:25] are always the IT state bits.
On M-profile, some of the reserved encodings of the IT state are used
to instead indicate partial progress through instructions that were
interrupted partway through by an exception and can be resumed.
These resumable instructions fall into two categories:
(1) load/store multiple instructions, where these bits are called
"ICI" and specify the register in the ldm/stm list where execution
should resume. (Specifically: LDM, STM, VLDM, VSTM, VLLDM, VLSTM,
CLRM, VSCCLRM.)
(2) MVE instructions subject to beatwise execution, where these bits
are called "ECI" and specify which beats in this and possibly also
the following MVE insn have been executed.
There are also a few insns (LE, LETP, and BKPT) which do not use the
ICI/ECI bits but must leave them alone.
Otherwise, we should raise an INVSTATE UsageFault for any attempt to
execute an insn with non-zero ICI/ECI bits.
So far we have been able to ignore ECI/ICI, because the architecture
allows the IMPDEF choice of "always restart load/store multiple from
the beginning regardless of ICI state", so the only thing we have
been missing is that we don't raise the INVSTATE fault for bad guest
code. However, MVE requires that we honour ECI bits and do not
rexecute beats of an insn that have already been executed.
Add the support in the decoder for handling ECI/ICI:
* identify the ECI/ICI case in the CONDEXEC TB flags
* when a load/store multiple insn succeeds, it updates the ECI/ICI
state (both in DisasContext and in the CPU state), and sets a flag
to say that the ECI/ICI state was handled
* if we find that the insn we just decoded did not handle the
ECI/ICI state, we delete all the code that we just generated for
it and instead emit the code to raise the INVFAULT. This allows
us to avoid having to update every non-MVE non-LDM/STM insn to
make it check for "is ECI/ICI set?".
We continue with our existing IMPDEF choice of not caring about the
ICI state for the load/store multiples and simply restarting them
from the beginning. Because we don't allow interrupts in the middle
of an insn, the only way we would see this state is if the guest set
ICI manually on return from an exception handler, so it's a corner
case which doesn't merit optimisation.
ICI update for LDM/STM is simple -- it always zeroes the state. ECI
update for MVE beatwise insns will be a little more complex, since
the ECI state may include information for the following insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-5-peter.maydell@linaro.org
When MVE is supported, the VPR register has a place on the exception
stack frame in a previously reserved slot just above the FPSCR.
It must also be zeroed in various situations when we invalidate
FPU context.
Update the code which handles the stack frames (exception entry and
exit code, VLLDM, and VLSTM) to save/restore VPR.
Update code which invalidates FP registers (mostly also exception
entry and exit code, but also VSCCLRM and the code in
full_vfp_access_check() that corresponds to the ExecuteFPCheck()
pseudocode) to zero VPR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-4-peter.maydell@linaro.org
MVE has an FPSCR.QC bit similar to the A-profile Neon one; when MVE
is implemented make the bit writeable, both in the generic "load and
store FPSCR" helper functions and in the code for handling the NZCVQC
sysreg which we had previously left as "TODO when we implement MVE".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-3-peter.maydell@linaro.org
Currently we provide Hn and H1_n macros for accessing the correct
data within arrays of vector elements of size 1, 2 and 4, accounting
for host endianness. We don't provide any macros for elements of
size 8 because there the host endianness doesn't matter. However,
this does result in awkwardness where we need to pass empty arguments
to macros, because checkpatch complains about them. The empty
argument is a little confusing for humans to read as well.
Add H8() and H1_8() macros and use them where we were previously
passing empty arguments to macros.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-2-peter.maydell@linaro.org
Message-id: 20210610132505.5827-1-peter.maydell@linaro.org
The test was off-by-one, because tag_last points to the
last byte of the tag to check, thus tag_last - prev_page
will equal TARGET_PAGE_SIZE when we use the first byte
of the next page.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/403
Reported-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210612195707.840217-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fprintf+assert has been in place since the beginning.
It is after to the fp_access_check, so we need to move the
check up. Fold that in to the pairwise filter.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The default of this switch is truly unreachable.
The switch selector is 3 bits, and all 8 cases are present.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fprintf+assert has been in place since the beginning.
It is prior to the fp_access_check, so we're still good to
raise sigill here.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210604183506.916654-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disable BF16 again for !have_neon and !have_vfp during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMMLA for both AArch64 AdvSIMD and SVE,
and VMMLA.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFCVT{N,T} for both AArch64 AdvSIMD and SVE,
and VCVT.BF16.F32 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the 64-bit BFCVT and the 32-bit VCVT{B,T}.BF16.F32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that the SVE BFLOAT16 support does not require SVE2,
it is an independent extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sequence cpu_restore_state() + raise_exception() is equivalent to
raise_exception_ra(), so use that instead. (In this case we never
cared about the syndrome value, because M-profile doesn't use the
syndrome; the old code was just written unnecessarily awkwardly.)
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Retain edited version of comment; rewrite commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that raise_exception_ra restores the state before raising the
exception we can use restore_exception_ra to perform the state restore +
exception raising without clobbering the syndrome.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Keep the one line of the comment that is still relevant]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that there are no other users of do_raise_exception, fold it into
raise_exception.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DAIF and PAC checks used raise_exception_ra to raise an exception
and unwind CPU state but raise_exception_ra is currently designed for
handling data aborts as the syndrome is partially precomputed and
encoded in the TB and then merged in merge_syn_data_abort when handling
the data abort. Using raise_exception_ra for DAIF and PAC checks
results in an empty syndrome being retrieved from data[2] in
restore_state_to_opc and setting ESR to 0. This manifested as:
kvm [571]: Unknown exception class: esr: 0x000000 –
Unknown/Uncategorized
when launching a KVM guest when the host qemu used a CPU supporting
EL2+pointer authentication and enabling pointer authentication in the
guest.
Rework raise_exception_ra such that the state is restored before raising
the exception so that the exception is not clobbered by
restore_state_to_opc.
Fixes: 0d43e1a2d2 ("target/arm: Add PAuth helpers")
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: added comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The operands to tcg_gen_atomic_fetch_s{min,max}_i64 must
be signed, so that the inputs are properly extended.
Zero extend the result afterward, as needed.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/364
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210602020720.47679-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we allow board models to specify the initial value of the
Secure VTOR register, using an init-svtor property on the TYPE_ARMV7M
object which is plumbed through to the CPU. Allow board models to
also specify the initial value of the Non-secure VTOR via a similar
init-nsvtor property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-10-peter.maydell@linaro.org
The M-profile FPSCR has an LTPSIZE field, but if MVE is not
implemented it is read-only and always reads as 4; this is how QEMU
currently handles it.
Make the field writable when MVE is implemented.
We can safely add the field to the MVE migration struct because
currently no CPUs enable MVE and so the migration struct is never
used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-8-peter.maydell@linaro.org
If MVE is implemented for an M-profile CPU then it has a VPR
register, which tracks predication information.
Implement the read and write handling of this register, and
the migration of its state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-7-peter.maydell@linaro.org
The fp_sysreg_checks() function is supposed to be returning an
FPSysRegCheckResult, which is an enum with three possible values.
However, three places in the function "return false" (a hangover from
a previous iteration of the design where the function just returned a
bool). Make these return FPSysRegCheckFailed instead (for no
functional change, since both false and FPSysRegCheckFailed are
zero).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-6-peter.maydell@linaro.org
Split out the handling of VMOV_reg_sp and VMOV_reg_dp so that we can
permit the insns if either FP or MVE are present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-5-peter.maydell@linaro.org
The do_vfp_2op_sp() and do_vfp_2op_dp() functions currently check
whether floating point is supported via the aa32_fpdp_v2 and
aa32_fpsp_v2 isar checks. For v8.1M MVE support, the VMOV_reg trans
functions (but not any of the others) need to update this to also
allow the insn if MVE is implemented. Move the check out of the do_
function and into its callsites (which are all implemented via the
DO_VFP_2OP macro), so we have a place to change the check for the
VMOV insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-4-peter.maydell@linaro.org
Some v8M instructions are present if either the floating point
extension or MVE is implemented. Update our implementation of them
to check for MVE as well as for FP.
This is all the insns which use CheckDecodeFaults(ExtType_MveOrFp) or
CheckDecodeFaults(ExtType_MveOrDpFp) in their pseudocode, which are
essentially the loads and stores, moves and sysreg accesses, except
for VMOV_reg_sp and VMOV_reg_dp, which we handle in subsequent
patches because they need a refactor to provide a place to put the
new MVE check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-3-peter.maydell@linaro.org
Add the isar feature check functions we will need for v8.1M MVE:
* a check for MVE present: this corresponds to the pseudocode's
CheckDecodeFaults(ExtType_Mve)
* a check for the optional floating-point part of MVE: this
corresponds to CheckDecodeFaults(ExtType_MveFp)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-2-peter.maydell@linaro.org
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-20-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The write_elf*() handlers are used to dump vmcore images.
This feature is only meaningful for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VirtIO devices are only meaningful with system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-17-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration is specific to system emulation.
- Move the CPUClass::vmsd field to SysemuCPUOps,
- restrict VMSTATE_CPU() macro to sysemu,
- vmstate_dummy is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quoting Peter Maydell [*]:
There are two ways to handle migration for
a CPU object:
(1) like any other device, so it has a dc->vmsd that covers
migration for the whole object. As usual for objects that are a
subclass of a parent that has state, the first entry in the
VMStateDescription field list is VMSTATE_CPU(), which migrates
the cpu_common fields, followed by whatever the CPU's own migration
fields are.
(2) a backwards-compatible mechanism for CPUs that were
originally migrated using manual "write fields to the migration
stream structures". The on-the-wire migration format
for those is based on the 'env' pointer (which isn't a QOM object),
and the cpu_common part of the migration data is elsewhere.
cpu_exec_realizefn() handles both possibilities:
* for type 1, dc->vmsd is set and cc->vmsd is not,
so cpu_exec_realizefn() does nothing, and the standard
"register dc->vmsd for a device" code does everything needed
* for type 2, dc->vmsd is NULL and so we register the
vmstate_cpu_common directly to handle the cpu-common fields,
and the cc->vmsd to handle the per-CPU stuff
You can't change a CPU from one type to the other without breaking
migration compatibility, which is why some guest architectures
are stuck on the cc->vmsd form. New targets should use dc->vmsd.
To avoid new targets to start using type (2), rename cc->vmsd as
cc->legacy_vmsd. The correct field to implement is dc->vmsd (the
DeviceClass one).
See also commit b170fce3dd ("cpu: Register VMStateDescription
through CPUState") for historic background.
[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210517105140.1062037-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disable I8MM again for !have_neon during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-93-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is {S,U,US}MMLA for both AArch64 AdvSIMD and SVE,
and V{S,U,US}MMLA.S8 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-91-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-90-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a common helper, sharing decode does not
save much. Also, this will solve an upcoming naming problem.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-89-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper that can handle the 4-register
format for helpers shared with SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-88-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were extracting the M register twice, once incorrectly
as M:vm and once correctly as rm. Remove the incorrect
name and remove the incorrect decode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-87-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cut and paste error from another pattern.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-86-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out a helper that can handle the 4-register
format for helpers shared with SVE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-85-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-84-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implements both vectored and indexed FMLALB, FMLALT, FMLSLB, FMLSLT
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-83-richard.henderson@linaro.org
Message-Id: <20200504171240.11220-1-steplong@quicinc.com>
[rth: Rearrange to use float16_to_float32_by_bits.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two copies of these, one set of which is not complete.
Move them to a common header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-82-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implements SQSHL/UQSHL, SRSHR/URSHR, and SQSHLU
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-81-richard.henderson@linaro.org
Message-Id: <20200430194159.24064-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-80-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-79-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_constant_i32 for passing the simd descriptor,
as this hashed value does not need to be freed.
Rename dofs to doff to match poff.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-78-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The table used by do_ldrq is a subset of the table used by do_ld_zpa;
we can share them by passing dtype instead of msz to do_ldrq.
The lack of MTE handling in do_ldrq was a bug, fixed by this change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-77-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-76-richard.henderson@linaro.org
Message-Id: <20200430191405.21641-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-75-richard.henderson@linaro.org
Message-Id: <20200428174332.17162-4-steplong@quicinc.com>
[rth: Use do_frint_mode, which avoids a specific runtime helper.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-74-richard.henderson@linaro.org
Message-Id: <20200428174332.17162-3-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-73-richard.henderson@linaro.org
Message-Id: <20200428174332.17162-2-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-72-richard.henderson@linaro.org
Message-Id: <20200428144352.9275-1-steplong@quicinc.com>
[rth: rearrange the macros a little and rebase]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-71-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-70-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-69-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-68-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-67-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to add more variations on this theme.
Accept the inner loop for the _h variants, rather
than keep it unrolled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-66-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to add more variations on this theme.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-65-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-64-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-63-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-62-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-61-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-60-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-59-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-58-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-57-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-56-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-55-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
