According to cxl_interleave_ways_enc(), fw->num_targets is allowed to be up
to 16. This also corresponds to CXL r3.0 spec. So, the fw->target_hbs[]
array is iterated from 0 to 15. But it is statically declared of length 8.
Thus, out of bound array access may occur.
Fixes: c28db9e000 ("hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEV")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Link: https://lore.kernel.org/r/20230913101055.754709-1-frolov@swemel.ru
Cc: qemu-stable@nongnu.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace the magic number 32 with CXL_RAS_ERR_HEADER_NUM for better code
readability and maintainability.
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
"Host Memory Backends" and "Memory devices" queue ("mem"):
- Support and document VM templating with R/O files using a new "rom"
parameter for memory-backend-file
- Some cleanups and fixes around NVDIMMs and R/O file handling for guest
RAM
- Optimize ioeventfd updates by skipping address spaces that are not
applicable
-----BEGIN PGP SIGNATURE-----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=iraT
-----END PGP SIGNATURE-----
Merge tag 'mem-2023-09-19' of https://github.com/davidhildenbrand/qemu into staging
Hi,
"Host Memory Backends" and "Memory devices" queue ("mem"):
- Support and document VM templating with R/O files using a new "rom"
parameter for memory-backend-file
- Some cleanups and fixes around NVDIMMs and R/O file handling for guest
RAM
- Optimize ioeventfd updates by skipping address spaces that are not
applicable
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmUJdykRHGRhdmlkQHJl
# ZGhhdC5jb20ACgkQTd4Q9wD/g1pf2w//akOUoYMuamySGjXtKLVyMKZkjIys+Ama
# k2C0xzsWAHBP572ezwHi8uxf5j9kzAjsw6GxDZ7FAamD9MhiohkEvkecloBx6f/c
# q3fVHblBNkG7v2urtf4+6PJtJvhzOST2SFXfWeYhO/vaA04AYCDgexv82JN3gA6B
# OS8WyOX62b8wILPSY2GLZ8IqpE9XnOYZwzVBn6YB1yo7ZkYEfXO6cA8nykNuNcOE
# vppqDo7uVIX6317FWj8ygxmzFfOaj0WT2MT2XFzEIDfg8BInQN8HC4mTn0hcVKMa
# N1y+eZH733CQKT+uNBRZ5YOeljOi4d6gEEyvkkA/L7e5D3Qg9hIdvHb4uryCFSWX
# Vt07OP1XLBwCZFobOC6sg+2gtTZJxxYK89e6ZzEd0454S24w5bnEteRAaCGOP0XL
# ww9xYULqhtZs55UC4rvZHJwdUAk1fIY4VqynwkeQXegvz6BxedNeEkJiiEU0Tizx
# N2VpsxAJ7H/LLSFeZoCRESo4azrH6U4n7S/eS1tkCniFqibfe2yIQCDoJVfb42ec
# gfg/vThCrDwHkIHzkMmoV8NndA7Q7SIkyMfYeEEBeZMeg8JzYll4DJEw/jQCacxh
# KRUa+AZvGlTJUq0mkvyOVfLki+iaehoIUuY1yvMrmdWijPO8n3YybmP9Ljhr8VdR
# 9MSYZe+I2v8=
# =iraT
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Sep 2023 06:25:45 EDT
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [unknown]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg: aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D FCCA 4DDE 10F7 00FF 835A
* tag 'mem-2023-09-19' of https://github.com/davidhildenbrand/qemu:
memory: avoid updating ioeventfds for some address_space
machine: Improve error message when using default RAM backend id
softmmu/physmem: Hint that "readonly=on,rom=off" exists when opening file R/W for private mapping fails
docs: Start documenting VM templating
docs: Don't mention "-mem-path" in multi-process.rst
softmmu/physmem: Never return directories from file_ram_open()
softmmu/physmem: Fail creation of new files in file_ram_open() with readonly=true
softmmu/physmem: Bail out early in ram_block_discard_range() with readonly files
softmmu/physmem: Remap with proper protection in qemu_ram_remap()
backends/hostmem-file: Add "rom" property to support VM templating with R/O files
softmmu/physmem: Distinguish between file access mode and mmap protection
nvdimm: Reject writing label data to ROM instead of crashing QEMU
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In this short queue we're making two important changes:
- Nicholas Piggin is now the qemu-ppc maintainer. Cédric Le Goater and
Daniel Barboza will act as backup during Nick's transition to this new
role.
- Support for NVIDIA V100 GPU with NVLink2 is dropped from qemu-ppc.
Linux removed the same support back in 5.13, we're following suit now.
A xive Coverity fix is also included.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZQhPnBYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFk5QUBAJJNnCtv/SPP6bQVNGMgtfI9sz2z
MEttDa7SINyLCiVxAP0Y9z8ZHEj6vhztTX0AAv2QubCKWIVbJZbPV5RWrHCEBQ==
=y3nh
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230918' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-09-18:
In this short queue we're making two important changes:
- Nicholas Piggin is now the qemu-ppc maintainer. Cédric Le Goater and
Daniel Barboza will act as backup during Nick's transition to this new
role.
- Support for NVIDIA V100 GPU with NVLink2 is dropped from qemu-ppc.
Linux removed the same support back in 5.13, we're following suit now.
A xive Coverity fix is also included.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZQhPnBYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFk5QUBAJJNnCtv/SPP6bQVNGMgtfI9sz2z
# MEttDa7SINyLCiVxAP0Y9z8ZHEj6vhztTX0AAv2QubCKWIVbJZbPV5RWrHCEBQ==
# =y3nh
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Sep 2023 09:24:44 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230918' of https://gitlab.com/danielhb/qemu:
spapr: Remove support for NVIDIA V100 GPU with NVLink2
ppc/xive: Fix uint32_t overflow
MAINTAINERS: Nick Piggin PPC maintainer, other PPC changes
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, when using a true R/O NVDIMM (ROM memory backend) with a label
area, the VM can easily crash QEMU by trying to write to the label area,
because the ROM memory is mmap'ed without PROT_WRITE.
[root@vm-0 ~]# ndctl disable-region region0
disabled 1 region
[root@vm-0 ~]# ndctl zero-labels nmem0
-> QEMU segfaults
Let's remember whether we have a ROM memory backend and properly
reject the write request:
[root@vm-0 ~]# ndctl disable-region region0
disabled 1 region
[root@vm-0 ~]# ndctl zero-labels nmem0
zeroed 0 nmem
In comparison, on a system with a R/W NVDIMM:
[root@vm-0 ~]# ndctl disable-region region0
disabled 1 region
[root@vm-0 ~]# ndctl zero-labels nmem0
zeroed 1 nmem
For ACPI, just return "unsupported", like if no label exists. For spapr,
return "H_P2", similar to when no label area exists.
Could we rely on the "unarmed" property? Maybe, but it looks cleaner to
only disallow what certainly cannot work.
After all "unarmed=on" primarily means: cannot accept persistent writes. In
theory, there might be setups where devices with "unarmed=on" set could
be used to host non-persistent data (temporary files, system RAM, ...); for
example, in Linux, admins can overwrite the "readonly" setting and still
write to the device -- which will work as long as we're not using ROM.
Allowing writing label data in such configurations can make sense.
Message-ID: <20230906120503.359863-2-david@redhat.com>
Fixes: dbd730e859 ("nvdimm: check -object memory-backend-file, readonly=on option")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
NVLink2 support was removed from the PPC PowerNV platform and VFIO in
Linux 5.13 with commits :
562d1e207d32 ("powerpc/powernv: remove the nvlink support")
b392a1989170 ("vfio/pci: remove vfio_pci_nvlink2")
This was 2.5 years ago. Do the same in QEMU with a revert of commit
ec132efaa8 ("spapr: Support NVIDIA V100 GPU with NVLink2"). Some
adjustements are required on the NUMA part.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230918091717.149950-1-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that we defer address space update and tlb_flush until
the next async_run_on_cpu, the plugin run at the end of the
instruction no longer has to contend with a flushed tlb.
Therefore, delete SavedIOTLB entirely.
Properly return false from tlb_plugin_lookup when we do
not have a tlb match.
Fixes a bug in which SavedIOTLB had stale data, because
there were multiple i/o accesses within a single insn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Small downtime optimisation for VFIO migration
* P2P support for VFIO migration
* Introduction of a save_prepare() handler to fail VFIO migration
* Fix on DMA logging ranges calculation for OVMF enabling dynamic window
-----BEGIN PGP SIGNATURE-----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=44e0
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20230911' of https://github.com/legoater/qemu into staging
vfio queue:
* Small downtime optimisation for VFIO migration
* P2P support for VFIO migration
* Introduction of a save_prepare() handler to fail VFIO migration
* Fix on DMA logging ranges calculation for OVMF enabling dynamic window
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmT+uZQACgkQUaNDx8/7
# 7KGFSw//UIqSet6MUxZZh/t7yfNFUTnxx6iPdChC3BphBaDDh99FCQrw5mPZ8ImF
# 4rz0cIwSaHXraugEsC42TDaGjEmcAmYD0Crz+pSpLU21nKtYyWtZy6+9kyYslMNF
# bUq0UwD0RGTP+ZZi6GBy1hM30y/JbNAGeC6uX8kyJRuK5Korfzoa/X5h+B2XfouW
# 78G1mARHq5eOkGy91+rAJowdjqtkpKrzkfCJu83330Bb035qAT/PEzGs5LxdfTla
# ORNqWHy3W+d8ZBicBQ5vwrk6D5JIZWma7vdXJRhs1wGO615cuyt1L8nWLFr8klW5
# MJl+wM7DZ6UlSODq7r839GtSuWAnQc2j7JKc+iqZuBBk1v9fGXv2tZmtuTGkG2hN
# nYXSQfuq1igu1nGVdxJv6WorDxsK9wzLNO2ckrOcKTT28RFl8oCDNSPPTKpwmfb5
# i5RrGreeXXqRXIw0VHhq5EqpROLjAFwE9tkJndO8765Ag154plxssaKTUWo5wm7/
# kjQVuRuhs5nnMXfL9ixLZkwD1aFn5fWAIaR0psH5vGD0fnB1Pba+Ux9ZzHvxp5D8
# Kg3H6dKlht6VXdQ/qb0Up1LXCGEa70QM6Th2iO924ydZkkmqrSj+CFwGHvBsINa4
# 89fYd77nbRbdwWurj3JIznJYVipau2PmfbjZ/jTed4RxjBQ+fPA=
# =44e0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:54:12 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20230911' of https://github.com/legoater/qemu:
vfio/common: Separate vfio-pci ranges
vfio/migration: Block VFIO migration with background snapshot
vfio/migration: Block VFIO migration with postcopy migration
migration: Add .save_prepare() handler to struct SaveVMHandlers
migration: Move more initializations to migrate_init()
vfio/migration: Fail adding device with enable-migration=on and existing blocker
migration: Add migration prefix to functions in target.c
vfio/migration: Allow migration of multiple P2P supporting devices
vfio/migration: Add P2P support for VFIO migration
vfio/migration: Refactor PRE_COPY and RUNNING state checks
qdev: Add qdev_add_vm_change_state_handler_full()
sysemu: Add prepare callback to struct VMChangeStateEntry
vfio/migration: Move from STOP_COPY to STOP in vfio_save_cleanup()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the PRE_COPY and RUNNING state checks to helper functions.
This is in preparation for adding P2P VFIO migration support, where
these helpers will also test for PRE_COPY_P2P and RUNNING_P2P states.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Connect the Configuration Frame controller (CFRAME_REG) and the
Configuration Frame broadcast controller (CFRAME_BCAST_REG) to the
Versal machine.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-9-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the Configuration Frame Unit (CFU_APB, CFU_FDRO and CFU_SFR) to
the Versal machine.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-8-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame broadcast
controller (CFRAME_BCAST_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-7-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame controller
(CFRAME_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20230831165701.2016397-6-francisco.iglesias@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's Single
Frame Read port (CFU_SFR).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-5-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's data out
port (CFU_FDRO).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-4-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of the software programming interface (CFU_APB) of
Xilinx Versal's Configuration Frame Unit.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-3-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the Xilinx Configuration Frame Interface (CFI) for transmitting
CFI data packets between the Xilinx Configuration Frame Unit models
(CFU_APB, CFU_FDRO and CFU_SFR), the Xilinx CFRAME controller (CFRAME_REG)
and the Xilinx CFRAME broadcast controller (CFRAME_BCAST_REG) models (when
emulating bitstream programming and readback).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230831165701.2016397-2-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Universal Flash Storage (UFS) is a high-performance mass storage device
with a serial interface. It is primarily used as a high-performance
data storage device for embedded applications.
This commit contains code for UFS device to be recognized
as a UFS PCI device.
Patches to handle UFS logical unit and Transfer Request will follow.
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 10232660d462ee5cd10cf673f1a9a1205fc8276c.1693980783.git.jeuk20.kim@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* debug facility improvements
* timebase and decrementer fixes
* record-replay fixes
* TCG fixes
* XIVE model improvements for multichip
-----BEGIN PGP SIGNATURE-----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=BUg6
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230906' of https://github.com/legoater/qemu into staging
ppc queue :
* debug facility improvements
* timebase and decrementer fixes
* record-replay fixes
* TCG fixes
* XIVE model improvements for multichip
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmT4WKoACgkQUaNDx8/7
# 7KHjOg//bwENCptopnvX5XVTdGLRgBKoMWPkQhWPv4aHYz4t+bxHVWopdMU7i0aL
# hge+ZCCkMKsg2rADczbpWytAvC3vo1Pn4zZhZNQuEvYKIpiWVN6hSflmXWP/bN1I
# AGHlptKvNYKlPfGsmzZ2OZ2yItzrOwKFC/PnPSEc6dxjWfe9hEwzApxaAkOfX8wf
# C+oH8DPvFmh3PH3rI4psCn/xYtxAPW1zosBtgT7Ii1XreABMHLIfIpOmPPh1yF0d
# J7BgBdmxIvsN+syH/vh5jTtU4N/gQVorwyds9MX82Y3j0roxBVVLqH8rFjJA3Jsq
# c/g8WTi1hHiDd8G4m1JcLI1VAhsgh1KhqG9pDaSdQXhP0E4p8N/XjxOR5ro+KxM3
# Dz/Q77VoEKuat+AXg71kc68i11CninhTVSyGnjI80ISWWYvHFQ2Sv8J9U6sS/d0m
# +fo6hed7DDgfXg4OMtedF4HMmc6JAfm9eBzHUoanaoIzX0vX6vetXeMfWh6iceYW
# KNcQuUi3Pvvh/AjE36jusqTkbTleP5Yo4OKNJz4pEP4sU2wQPYU32Lo7Kg7p4WPA
# j+emWmWX4gcn9zTvm2LPYwkdgQ5HgigUJzq9i9qlMqfOOCpRwAsE7V0KxyV0NwDT
# cAAOBCdNm4t94Ni3KEING7xuDzERvJ7H2D6uRQjVsre8cMUO0QE=
# =BUg6
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Sep 2023 06:47:06 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20230906' of https://github.com/legoater/qemu: (35 commits)
ppc/xive: Add support for the PC MMIOs
ppc/xive: Handle END triggers between chips with MMIOs
ppc/xive: Introduce a new XiveRouter end_notify() handler
ppc/xive: Use address_space routines to access the machine RAM
target/ppc: Fix the order of kvm_enable judgment about kvmppc_set_interrupt()
hw/ppc/e500: fix broken snapshot replay
target/ppc: Flush inputs to zero with NJ in ppc_store_vscr
target/ppc: Fix LQ, STQ register-pair order for big-endian
tests/avocado: ppc64 reverse debugging tests for pseries and powernv
tests/avocado: reverse-debugging cope with re-executing breakpoints
tests/avocado: boot ppc64 pseries replay-record test to Linux VFS mount
spapr: Fix record-replay machine reset consuming too many events
spapr: Fix machine reset deadlock from replay-record
target/ppc: Fix timebase reset with record-replay
target/ppc: Fix CPU reservation migration for record-replay
hw/ppc: Read time only once to perform decrementer write
hw/ppc: Reset timebase facilities on machine reset
target/ppc: Migrate DECR SPR
hw/ppc: Always store the decrementer value
target/ppc: Sign-extend large decrementer to 64-bits
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fixes for the Aspeed I2C model
* New SDK image for avocado tests
* blockdev support for flash device definition
* SD refactoring preparing ground for eMMC support
-----BEGIN PGP SIGNATURE-----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=ymmX
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixes for the Aspeed I2C model
* New SDK image for avocado tests
* blockdev support for flash device definition
* SD refactoring preparing ground for eMMC support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmTxsaQACgkQUaNDx8/7
# 7KGXmg//XJNisscl/VWSBaGmH5MbQUAg/QCRalXx1V/lJ8rhE/JqwnWKuoPFd4EN
# iDlh3ufpzxPhHFc9boechuM5ytlrJxpLJoCIJ4sw/4qnO3Dy3Q6BCy1t8Ma62D1u
# oE7cAMHsriJ1uTJNHUTFo72VapTaH2XwFN9lFDuQW45d+WWAXtVJsqvRgFETNmw6
# YYnTTpH2gLTZZFEgOixhWpGLh4Ibc/l8U1VzL0ctQmC11xng0bqk3PAqU9NGzcM5
# MJmEGAxg43CnFu9NJI1nMqC/coi/8PFtrM7HprSwE3H8Jkwncs4ePVT+kZQC+VNQ
# 7EaVkksfEGHlN8XP5+eQDrQ5yT6ve+fbHTLQhwULfeyt0GlQ8h1yewvHCDWo/zw3
# XI1ZyOcNZ2yiaenSUrTPzu0LiqZEJQnzRjPCpgTi1fU08ryEMEaPtr176YDLCguQ
# cpRj4QSZHCrGl/Eo9NlkFP/2rQDKTvCcedKPkYLQtsurSiH/36Oj9YvZycNtZ574
# ortKAtru4YV/rglNX4L8JDhdI+nqvy1liifpJsiS/2KBZDpVFaP8PzGIV40HNy3G
# 8/LVTnaggZaScF3ftHhkg84uQumELS9l2dhsNCL9HqdlrNXLQrVAIR6iuQlpOKBa
# 5S/6h7ZXGOb1qNVQjYp4HCrB7X1KIJYksZ3GdUREf8ot5Ds1FhE=
# =ymmX
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 05:40:52 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu: (26 commits)
hw/sd: Introduce a "sd-card" SPI variant model
hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler
hw/sd: Add sd_cmd_SEND_TUNING_BLOCK() handler
hw/sd: Add sd_cmd_SEND_RELATIVE_ADDR() handler
hw/sd: Add sd_cmd_ALL_SEND_CID() handler
hw/sd: Add sd_cmd_SEND_OP_CMD() handler
hw/sd: Add sd_cmd_GO_IDLE_STATE() handler
hw/sd: Add sd_cmd_unimplemented() handler
hw/sd: Add sd_cmd_illegal() handler
hw/sd: Introduce sd_cmd_handler type
hw/sd: Move proto_name to SDProto structure
hw/sd: When card is in wrong state, log which spec version is used
hw/sd: When card is in wrong state, log which state it is
hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01
aspeed: Get the BlockBackend of FMC0 from the flash device
m25p80: Introduce an helper to retrieve the BlockBackend of a device
aspeed: Create flash devices only when defaults are enabled
hw/ssi: Check for duplicate CS indexes
aspeed/smc: Wire CS lines at reset
hw/ssi: Introduce a ssi_get_cs() helper
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It will help us model the END triggers on the PowerNV machine, which
can be rerouted to another interrupt controller.
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
spapr_machine_reset gets a random number to populate the device-tree
rng seed with. When loading a snapshot for record-replay, the machine
is reset again, and that tries to consume the random event record
again, crashing due to inconsistent record
Fix this by saving the seed to populate the device tree with, and
skipping the rng on snapshot load.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When the machine is reset to load a new snapshot while being debugged
with replay-record, it is done from another thread, so the CPU does
not run the register setting operations. Set CPU registers directly in
machine reset.
Cc: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Lower interrupts, delete timers, and set time facility registers
back to initial state on machine reset.
This is not so important for record-replay since timebase and
decrementer are migrated, but it gives a cleaner reset state.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch.pl fixes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
and replace the SDState::spi attribute with a test checking the
SDProto array of commands.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new structure to hold the bus protocol specific
fields: SDProto. The first field is the protocol name.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-4-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It will help in getting rid of some drive_get(IF_MTD) calls by
retrieving the BlockBackend directly from the m25p80 device.
Cc: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Simple routine to retrieve a DeviceState object on a SPI bus using its
CS index. It will be useful for the board to wire the CS lines.
Cc: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Boards will use this new property to identify the device CS line and
wire the SPI controllers accordingly.
Cc: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added support for the buffer organization option in pool buffer control
register.when set to 1,The buffer is split into two parts: Lower 16 bytes
for Tx and higher 16 bytes for Rx.
Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fixed inconsistency between the regisiter bit field definition header file
and the ast2600 datasheet. The reg name is I2CD1C:Pool Buffer Control
Register in old register mode and I2CC0C: Master/Slave Pool Buffer Control
Register in new register mode. They share bit field
[12:8]:Transmit Data Byte Count and bit field
[29:24]:Actual Received Pool Buffer Size according to the datasheet.
According to the ast2600 datasheet,the actual Tx count is
Transmit Data Byte Count plus 1, and the max Rx size is
Receive Pool Buffer Size plus 1, both in Pool Buffer Control Register.
The version before forgot to plus 1, and mistake Rx count for Rx size.
Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn>
Fixes: 3be3d6ccf2 ("aspeed: i2c: Migrate to registerfields API")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
kvmclock_create() is only implemented in hw/i386/kvm/clock.h.
Restrict the "hw/kvm/clock.h" header to i386 by moving it to
hw/i386/.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230620083228.88796-3-philmd@linaro.org>
We shouldn't call kvmclock_create() when KVM is not available
or disabled:
- check for kvm_enabled() before calling it
- assert KVM is enabled once called
Since the call is elided when KVM is not available, we can
remove the stub (it is never compiled).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230620083228.88796-2-philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
By default, C function prototypes declared in headers are visible,
so there is no need to declare them as 'extern' functions.
Remove this redundancy in a single bulk commit; do not modify:
- meson.build (used to check function availability at runtime)
- pc-bios/
- libdecnumber/
- tests/
- *.c
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230605175647.88395-5-philmd@linaro.org>
HAX is deprecated since commits 73741fda6c ("MAINTAINERS: Abort
HAXM maintenance") and 90c167a1da ("docs/about/deprecated: Mark
HAXM in QEMU as deprecated"), released in v8.0.0.
Per the latest HAXM release (v7.8 [*]), the latest QEMU supported
is v7.2:
Note: Up to this release, HAXM supports QEMU from 2.9.0 to 7.2.0.
The next commit (https://github.com/intel/haxm/commit/da1b8ec072)
added:
HAXM v7.8.0 is our last release and we will not accept
pull requests or respond to issues after this.
It became very hard to build and test HAXM. Its previous
maintainers made it clear they won't help. It doesn't seem to be
a very good use of QEMU maintainers to spend their time in a dead
project. Save our time by removing this orphan zombie code.
[*] https://github.com/intel/haxm/releases/tag/v7.8.0
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230831082016.60885-1-philmd@linaro.org>
* Some of the preliminary patches for Cortex-A710 support
* i.MX7 and i.MX6UL refactoring
* Implement SRC device for i.MX7
* Catch illegal-exception-return from EL3 with bad NSE/NS
* Use 64-bit offsets for holding time_t differences in RTC devices
* Model correct number of MPU regions for an505, an521, an524 boards
-----BEGIN PGP SIGNATURE-----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=MFh3
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Some of the preliminary patches for Cortex-A710 support
* i.MX7 and i.MX6UL refactoring
* Implement SRC device for i.MX7
* Catch illegal-exception-return from EL3 with bad NSE/NS
* Use 64-bit offsets for holding time_t differences in RTC devices
* Model correct number of MPU regions for an505, an521, an524 boards
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmTwbukZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3ihBD/wK8Iz0KpTAwZBDAodnSZrh
# tQnJAvYFp8CxA4O8sZ9IeWsZh90gzsTCZi0NqUTTzvWCJfxkB7qTPdlJT5IzVxou
# oEUk2aogSJhRA3XRJzqArXsPlnZGSYDbtwKx4VtfCvOCCH08Y7nhnFaRj1oFnR4Q
# 0PE/8YtGXTBxLHrO8U3tomg7zElzOUP8ZVZtb30BOyw1jtfSD03IZR8dzpA43u1E
# Hh418WvVekmwFoFNh8yUeHzbyXMZufzvbJPuDGJ8pPWwIpvSG6chOnKF8jZll+Ur
# DqOsDkGlQgcBR2QwYfSPClrEkX8yahJ95PBfM6giG+DQC7OiElqXqTiUGZcpgUVo
# uSUbzS4YPsxCnyVV6SBXV+f/8hdXBxOSHTgl7OAFa8X9OwWwspxHJ/v2o/2ibnUT
# hTTkFp/w1nQwVEN8xf1DOUpm/J2Wr8UeH4f776daSrfKAol2BKbHb8dOgGLQCwqb
# G+iDcE4bkzRqly6f+uVk8xSEZDd9P1NYoxKV+gNlV1dTspdHVpTC+rXMa8dRw5hI
# 4KgaAslj++Xa229xkjORXCJ1cICRIebYg7+SjvTtGBYsFV7plsCcYb/R9yLmhVCf
# fKHKKaYe9sQJ82apOIkTc+nnW8BQQx6XUmU/A//iZ8JGLk6DpJcZ8f1m/2rVZTsl
# 9+lsmpBf4w+uR4o+Womhfw==
# =MFh3
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Aug 2023 06:43:53 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20230831' of https://git.linaro.org/people/pmaydell/qemu-arm: (24 commits)
hw/arm: Set number of MPU regions correctly for an505, an521, an524
hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties
target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init
rtc: Use time_t for passing and returning time offsets
hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference
hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec
hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm()
target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS
Add i.MX7 SRC device implementation
Add i.MX7 missing TZ devices and memory regions
Refactor i.MX7 processor code
Add i.MX6UL missing devices.
Refactor i.MX6UL processor code
Remove i.MX7 IOMUX GPR device from i.MX6UL
target/arm: properly document FEAT_CRC32
target/arm: Implement FEAT_HPDS2 as a no-op
target/arm: Suppress FEAT_TRBE (Trace Buffer Extension)
target/arm: Apply access checks to neoverse-v1 special registers
target/arm: Apply access checks to neoverse-n1 special registers
target/arm: Introduce make_ccsidr64
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The
MPS2/MPS3 FPGA images don't override these except in the case of
AN547, which uses 16 MPU regions.
Define properties on the ARMSSE object for the MPU regions (using the
same names as the documented RTL configuration settings, and
following the pattern we already have for this device of using
all-caps names as the RTL does), and set them in the board code.
We don't actually need to override the default except on AN547,
but it's simpler code to have the board code set them always
rather than tracking which board subtypes want to set them to
a non-default value separately from what that value is.
Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524
we now correctly use 8 MPU regions, while mps3-an547 stays at its
current 16 regions.
It's possible some guest code wrongly depended on the previous
incorrectly modeled number of memory regions. (Such guest code
should ideally check the number of regions via the MPU_TYPE
register.) The old behaviour can be obtained with additional
-global arguments to QEMU:
For mps2-an521 and mps2-an524:
-global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16
For mps2-an505:
-global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16
NB that the way the implementation allows this use of -global
is slightly fragile: if the board code explicitly sets the
properties on the sse-200 object, this overrides the -global
command line option. So we rely on:
- the boards that need fixing all happen to use the SSE defaults
- we can write the board code to only set the property if it
is different from the default, rather than having all boards
explicitly set the property
- the board that does need to use a non-default value happens
to need to set it to the same value (16) we previously used
This works, but there are some kinds of refactoring of the
mps2-tz.c code that would break the support for -global here.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org
M-profile CPUs generally allow configuration of the number of MPU
regions that they have. We don't currently model this, so our
implementations of some of the board models provide CPUs with the
wrong number of regions. RTOSes like Zephyr that hardcode the
expected number of regions may therefore not run on the model if they
are set up to run on real hardware.
Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object,
matching the ability of hardware to configure the number of Secure
and NonSecure regions separately. Our actual CPU implementation
doesn't currently support that, and it happens that none of the MPS
boards we model set the number of regions differently for Secure vs
NonSecure, so we provide an interface to the boards and SoCs that
won't need to change if we ever do add that functionality in future,
but make it an error to configure the two properties to different
values.
(The property name on the CPU is the somewhat misnamed-for-M-profile
"pmsav7-dregion", so we don't follow that naming convention for
the properties here. The TRM doesn't say what the CPU configuration
variable names are, so we pick something, and follow the lowercase
convention we already have for properties here.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org
In the aspeed_rtc device we store a difference between two time_t
values in an 'int'. This is not really correct when time_t could
be 64 bits. Enlarge the field to 'int64_t'.
This is a migration compatibility break for the aspeed boards.
While we are changing the vmstate, remove the accidental
duplicate of the offset field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The SRC device is normally used to start the secondary CPU.
When running Linux directly, QEMU is emulating a PSCI interface that UBOOT
is installing at boot time and therefore the fact that the SRC device is
unimplemented is hidden as Qemu respond directly to PSCI requets without
using the SRC device.
But if you try to run a more bare metal application (maybe uboot itself),
then it is not possible to start the secondary CPU as the SRC is an
unimplemented device.
This patch adds the ability to start the secondary CPU through the SRC
device so that you can use this feature in bare metal applications.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Add TZASC as unimplemented device.
- Allow bare metal application to access this (unimplemented) device
* Add CSU as unimplemented device.
- Allow bare metal application to access this (unimplemented) device
* Add various memory segments
- OCRAM
- OCRAM EPDC
- OCRAM PXP
- OCRAM S
- ROM
- CAAM
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Add Addr and size definition for all i.MX7 devices in i.MX7 header file.
* Use those newly defined named constants whenever possible.
* Standardize the way we init a familly of unimplemented devices
- SAI
- PWM
- CAN
* Add/rework few comments
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
