There was no proper implementation of TCP segmentation before this
change, and net_tx_pkt relied solely on IPv4 fragmentation. Not only
this is not aligned with the specification, but it also resulted in
corrupted IPv6 packets.
This is particularly problematic for the igb, a new proposed device
implementation; igb provides loopback feature for VMDq and the feature
relies on software segmentation.
Implement proper TCP segmentation in net_tx_pkt to fix such a scenario.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e didn't perform software segmentation for loopback if virtio-net
header is enabled, which is wrong.
To fix the problem, introduce net_tx_pkt_send_custom(), which allows the
caller to specify whether offloading should be assumed or not.
net_tx_pkt_send_custom() also allows the caller to provide a custom
sending function. Packets with virtio-net headers and ones without
virtio-net headers will be provided at the same time so the function
can choose the preferred version. In case of e1000e loopback, it prefers
to have virtio-net headers as they allows to skip the checksum
verification if VIRTIO_NET_HDR_F_DATA_VALID is set.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When virtio-net header is not set, net_rx_pkt_get_vhdr() returns
zero-filled virtio_net_hdr, which is actually valid. In fact, tap device
uses zero-filled virtio_net_hdr when virtio-net header is not provided
by the peer. Therefore, we can just remove net_rx_pkt_has_virt_hdr() and
always assume NetTxPkt has a valid virtio-net header.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The new function qemu_get_using_vnet_hdr() allows to automatically
determine if virtio-net header is used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000x_is_vlan_packet() had a pointer to uint8_t as a parameter, but
it does not have to be uint8_t. Change the type to void *.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_tx_pkt_build_vheader() inspects TCP header but had no check for
the header size, resulting in an undefined behavior. Check the header
size and drop the packet if the header is too small.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e_write_packet_to_guest() passes the reference of variable ba as a
pointer to an array, and that pointer indirection is just unnecessary;
all functions which uses the passed reference performs no pointer
operation on the pointer and they simply dereference the passed
pointer. Remove the extra pointer indirection.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This keeps Windows driver 12.18.9.23 from generating an event with ID
30. The description of the event is as follows:
> Intel(R) 82574L Gigabit Network Connection
> PROBLEM: The network adapter is configured for auto-negotiation but
> the link partner is not. This may result in a duplex mismatch.
> ACTION: Configure the link partner for auto-negotiation.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Before this change, e1000e_write_packet_to_guest() allocated the
receive descriptor buffer as an array of uint8_t. This does not ensure
the buffer is sufficiently aligned.
Introduce e1000_rx_desc_union type, a union type of all receive
descriptor types to correct this.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is part of recent efforts of refactoring e1000 and e1000e.
DeviceClass's reset member is deprecated so migrate to ResettableClass.
There is no behavioral difference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is part of recent efforts of refactoring e1000 and e1000e.
DeviceClass's reset member is deprecated so migrate to ResettableClass.
There is no behavioral difference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change makes e1000e reset more things when software reset was
triggered. Some registers are exempted from software reset in the
datasheet and this change also implements the behavior accordingly.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
They are duplicate of running throttling timer flags and incomplete as
the flags are not cleared when the interrupts are fired or the device is
reset.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use memcpy instead of memmove to initialize registers. The initial
register templates and register table instances will never overlap.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use memcpy instead of memmove to initialize registers. The initial
register templates and register table instances will never overlap.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When a register has effective bits fewer than their width, the old code
inconsistently masked when writing or reading. Make the code consistent
by always masking when writing, and remove some code duplication.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e_set_16bit and e1000e_set_12bit look so similar so define a
generic macro.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When a register has effective bits fewer than their width, the old code
inconsistently masked when writing or reading. Make the code consistent
by always masking when writing, and remove some code duplication.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hw/net/mii.h provides common definitions for MII.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hw/net/mii.h provides common definitions for MII.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb implementation first starts off by copying e1000e code. Correct the
code style before that.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is phase 2, following on from the basic platform support which was
already merged.
• Add a simple single-tenant internal XenStore implementation
• Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table
• Provide emulated back ends for Xen operations
• Header cleanups to allow PV back ends to build without Xen itself
• Enable PV back ends in emulated mode
• Documentation update
Tested-by: Paul Durrant <paul@xen.org>
... on real Xen (master branch, 4.18) with a Debian guest.
-----BEGIN PGP SIGNATURE-----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=JGLX
-----END PGP SIGNATURE-----
Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into staging
Enable PV backends with Xen/KVM emulation
This is phase 2, following on from the basic platform support which was
already merged.
• Add a simple single-tenant internal XenStore implementation
• Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table
• Provide emulated back ends for Xen operations
• Header cleanups to allow PV back ends to build without Xen itself
• Enable PV back ends in emulated mode
• Documentation update
Tested-by: Paul Durrant <paul@xen.org>
... on real Xen (master branch, 4.18) with a Debian guest.
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB
# KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk
# AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS
# +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu
# Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ
# jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca
# I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD
# SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS
# OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr
# km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0
# VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18
# 1mq9v6Xe9RQZ
# =JGLX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits)
docs: Update Xen-on-KVM documentation for PV disk support
MAINTAINERS: Add entry for Xen on KVM emulation
i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation
hw/xen: Implement soft reset for emulated gnttab
hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore
hw/xen: Add emulated implementation of XenStore operations
hw/xen: Add emulated implementation of grant table operations
hw/xen: Hook up emulated implementation for event channel operations
hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it
hw/xen: Avoid crash when backend watch fires too early
hw/xen: Build PV backend drivers for CONFIG_XEN_BUS
hw/xen: Rename xen_common.h to xen_native.h
hw/xen: Use XEN_PAGE_SIZE in PV backend drivers
hw/xen: Move xenstore_store_pv_console_info to xen_console.c
hw/xen: Add xenstore operations to allow redirection to internal emulation
hw/xen: Add foreignmem operations to allow redirection to internal emulation
hw/xen: Pass grant ref to gnttab unmap operation
hw/xen: Add gnttab operations to allow redirection to internal emulation
hw/xen: Add evtchn operations to allow redirection to internal emulation
hw/xen: Create initial XenStore nodes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Small adjustments for the newest Meta machines
* blk_pread_nonzeroes() fix required for pflash and m25p80 devices
* Improve error reporting on file size for m25p80 devices
-----BEGIN PGP SIGNATURE-----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=Xs26
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu into staging
aspeed queue:
* Small adjustments for the newest Meta machines
* blk_pread_nonzeroes() fix required for pflash and m25p80 devices
* Improve error reporting on file size for m25p80 devices
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQHXi8ACgkQUaNDx8/7
# 7KHB7w//SQzcTNAUgMc6zbe3bULS9YU7csg0zX896DwQ9Ub4wtbnIps0/JwOsx6E
# ss52YbbRVlHKcbahX6WW8JHtc6Wepcmnp4vC5dXdqgRryLTK5GgBu/GKcBb6qnHZ
# uXwJpf7IwygOXQFg9Wy4zl3ipmrjgzMy6ZEbc3oqQUto+8E7HVMJiMXnrT5Y0yLt
# Y76PywBxkYWcd522lWAXziXFxHaEJGMGrDCI/op4TuNAk0QLSRHp+x851JBF0Uyx
# Lkp1cEjgADoH1FUfvo7aCNtAWGP4IFDprEupI3idPqjZ8KnnwPk2cnBMGeKJ5lWQ
# XfSTwG5B3hYwGM0uYwHzHXUsq5/JGa0iDhSvjZVD8rf/w9BTek/GjypbJpL2XW6b
# 4QaGGKGFWWMHbAaNVP6oEGqmkoC3QRKoQuaP6epaFyuSjNRWXkOhf5S5V10akjSc
# xis0Z8gIpyLrtFT2TFc5BN9+z+PLgyaYyh7wZ2pFy1i6SOgh4FIFBOzQJDb05mmf
# aFMD+6FOGx0wo8OXfy5EQyElWhVSYio+Hx9DaDP3d3cd/twHJx8nZ8QlXh2ThRd8
# jNLdFReJBImCJHSmYzbc/tGDOjg6+TWkZOzdjqTra08UwisK4XyOKj8E+sodWr0y
# e/hI9nmIoarLCytMN1zElQFvj8xjpZ2lZOxr2EiX5ugYg0iuJhU=
# =Xs26
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 15:54:23 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu:
hw/arm/aspeed: Modified BMC FRU byte data in yosemitev2
hw/arm/aspeed: Added TMP421 type sensor's support in tiogapass
hw/arm/aspeed: Added TMP421 type sensor's support in yosemitev2
pflash: Fix blk_pread_nonzeroes()
m25p80: Improve error when the backend file size does not match the device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In virtqueue_{split,packed}_get_avail_bytes() descriptors are read
in a loop via MemoryRegionCache regions and calls to
vring_{split,packed}_desc_read() - these take a region cache and the
index of the descriptor to be read.
For direct descriptors we use a cache provided by the caller, whose
size matches that of the virtqueue vring. We limit the number of
descriptors we can read by the size of that vring:
max = vq->vring.num;
...
MemoryRegionCache *desc_cache = &caches->desc;
For indirect descriptors, we initialize a new cache and limit the
number of descriptors by the size of the intermediate descriptor:
len = address_space_cache_init(&indirect_desc_cache,
vdev->dma_as,
desc.addr, desc.len, false);
desc_cache = &indirect_desc_cache;
...
max = desc.len / sizeof(VRingDesc);
However, the first initialization of `max` is done outside the loop
where we process guest descriptors, while the second one is done
inside. This means that a sequence of an indirect descriptor followed
by a direct one will leave a stale value in `max`. If the second
descriptor's `next` field is smaller than the stale value, but
greater than the size of the virtqueue ring (and thus the cached
region), a failed assertion will be triggered in
address_space_read_cached() down the call chain.
Fix this by initializing `max` inside the loop in both functions.
Fixes: 9796d0ac8f ("virtio: use address_space_map/unmap to access descriptors")
Signed-off-by: Carlos López <clopez@suse.de>
Message-Id: <20230302100358.3613-1-clopez@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During protocol negotiation, when we the QEMU
stub does not support a backend with F_CONFIG,
it throws a warning and supresses the
VHOST_USER_PROTOCOL_F_CONFIG bit.
However, the warning uses warn_reportf_err macro
and passes an unitialized errp pointer. However,
the macro tries to edit the 'msg' member of the
unitialized Error and segfaults.
Instead, just use warn_report, which prints a
warning message directly to the output.
Fixes: 5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported")
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20230302121719.9390-1-aesteve@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CXL r3.0 specification allows for there to be no HDM decoders on CXL
Host Bridges if they have only a single root port. Instead, all accesses
directed to the host bridge (as specified in CXL Fixed Memory Windows)
are assumed to be routed to the single root port.
Linux currently assumes this implementation choice. So to simplify testing,
make QEMU emulation also default to no HDM decoders under these particular
circumstances, but provide a hdm_for_passthrough boolean option to have
HDM decoders as previously.
Technically this is breaking backwards compatibility, but given the only
known software stack used with the QEMU emulation is the Linux kernel
and this configuration did not work before this change, there are
unlikely to be any complaints that it now works. The option is retained
to allow testing of software that does allow for these HDM decoders to exist,
once someone writes it.
Reported-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
v2: Pick up and fix typo in tag from Fan Ni
Message-Id: <20230227153128.8164-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These two helpers enable host bridges to operate differently depending on
the number of downstream ports, in particular if there is only a single
port.
Useful for CXL where HDM address decoders are allowed to be implicit in
the host bridge if there is only a single root port.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230227153128.8164-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If certain bit is set remote wake up should change state from
suspended to resume and generate interrupt. There was a todo comment
for this, implement that by moving existing resume logic to a function
and call that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <35c4d4ccf2f73e6a87cdbd28fb6a1b33de72ed74.1676916640.git.balaton@eik.bme.hu>
[PMD: Have ohci_resume() return a boolean]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add basic implementation of the AC'97 sound part used in VIA south
bridge chips. Not all features of the device is emulated, only one
playback channel is supported for now but this is enough to get sound
output from some guests using this device on pegasos2.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <63b99410895312f40e7be479f581da0805e605a1.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
According to the PCI specification, PCI_INTERRUPT_LINE shall have no
effect on hardware operations. Now that the VIA south bridges implement
the internal PCI interrupt router let's be more conformant to the PCI
specification.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9fb86a74d16db65e3aafbb154238d55e123053eb.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
According to the PegasosII schematics the PCI interrupt lines are
connected to both the gpp pins of the Mv64361 north bridge and the
PINT pins of the VT8231 south bridge so guests can get interrupts from
either of these. So far we only had the MV64361 connections which
worked for on board devices but for additional PCI devices (such as
network or sound card added with -device) guest OSes expect interrupt
from the ISA IRQ 9 where the firmware routes these PCI interrupts in
VT8231 ISA bridge. After the previous patches we can now model this
and also remove the board specific connection from mv64361. Also
configure routing of these lines when using Virtual Open Firmware to
match board firmware for guests that expect this.
This fixes PCI interrupts on pegasos2 under Linux, MorphOS and AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <520ff9e6eeef600ee14a4116c0c7b11940cc499c.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The real VIA south bridges implement a PCI IRQ router which is configured
by the BIOS or the OS. In order to respect these configurations, QEMU
needs to implement it as well. The real chip may allow routing IRQs from
internal functions independently of PCI interrupts but since guests
usually configute it to a single shared interrupt we don't model that
here for simplicity.
Note: The implementation was taken from piix4_set_irq() in hw/isa/piix4.
Suggested-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <fbb016c7d0e19093335c237e15f5f6c62c4393b4.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Back in the mists of time, before EISA came along and required per-pin
level control in the ELCR register, the i8259 had a single chip-wide
level-mode control in bit 3 of ICW1.
Even in the PIIX3 datasheet from 1996 this is documented as 'This bit is
disabled', but apparently MorphOS is using it in the version of the
i8259 which is in the Pegasos2 board as part of the VT8231 chipset.
It's easy enough to implement, and I think it's harmless enough to do so
unconditionally.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
[balaton: updated commit message as asked by author]
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <3f09b2dd109d19851d786047ad5c2ff459c90cd7.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a property to allow disabling pixman and always use the fallbacks
for different operations which is useful for testing different drawing
methods or debugging pixman related issues.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <61768ffaefa71b65a657d1365823bd43c7ee9354.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To be 'usable', QDev objects (which are QOM objects) must be
1/ initialized (at this point their properties can be modified), then
2/ realized (properties are consumed).
Some devices (objects) might depend on other devices. When creating
the 'QOM composition tree', parent objects can't be 'realized' until
all their children are. We might also have circular dependencies.
A common circular dependency occurs with IRQs. Device (A) has an
output IRQ wired to device (B), and device (B) has one to device (A).
When (A) is realized and connects its IRQ to an unrealized (B), the
IRQ handler on (B) is not yet created. QEMU pass IRQ between objects
as pointer. When (A) poll (B)'s IRQ, it is NULL. Later (B) is realized
and its IRQ pointers are populated, but (A) keeps a reference to a
NULL pointer.
A common pattern to bypass this circular limitation is to use 'proxy'
objects. Proxy (P) is created (and realized) before (A) and (B). Then
(A) and (B) can be created in different order, it doesn't matter: (P)
pointers are already populated.
Commit bb98e0f59c ("hw/isa/vt82c686: Remove intermediate IRQ
forwarder") neglected the QOM/QDev circular dependency issue, and
removed the 'proxy' between the southbridge, its PCI functions and the
interrupt controller, resulting in PCI functions wiring output IRQs to
'NULL', leading to guest failures (IRQ never delivered) [1] [2].
Since we are entering feature freeze, it is safer to revert the
offending patch until we figure a way to strengthen our APIs.
[1] https://lore.kernel.org/qemu-devel/928a8552-ab62-9e6c-a492-d6453e338b9d@redhat.com/
[2] https://lore.kernel.org/qemu-devel/cover.1677628524.git.balaton@eik.bme.hu/
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <cdfb3c5a42e505450f6803124f27856434c5b298.1677628524.git.balaton@eik.bme.hu>
[PMD: Reworded description]
Inspired-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To be 'usable', QDev objects (which are QOM objects) must be
1/ initialized (at this point their properties can be modified), then
2/ realized (properties are consumed).
Some devices (objects) might depend on other devices. When creating
the 'QOM composition tree', parent objects can't be 'realized' until
all their children are. We might also have circular dependencies.
A common circular dependency occurs with IRQs. Device (A) has an
output IRQ wired to device (B), and device (B) has one to device (A).
When (A) is realized and connects its IRQ to an unrealized (B), the
IRQ handler on (B) is not yet created. QEMU pass IRQ between objects
as pointer. When (A) poll (B)'s IRQ, it is NULL. Later (B) is realized
and its IRQ pointers are populated, but (A) keeps a reference to a
NULL pointer.
A common pattern to bypass this circular limitation is to use 'proxy'
objects. Proxy (P) is created (and realized) before (A) and (B). Then
(A) and (B) can be created in different order, it doesn't matter: (P)
pointers are already populated.
Commit cef2e7148e ("hw/isa/i82378: Remove intermediate IRQ forwarder")
neglected the QOM/QDev circular dependency issue, and removed the
'proxy' between the southbridge, its PCI functions and the interrupt
controller, resulting in PCI functions wiring output IRQs to
'NULL', leading to guest failures (IRQ never delivered) [1] [2].
Since we are entering feature freeze, it is safer to revert the
offending patch until we figure a way to strengthen our APIs.
[1] https://lore.kernel.org/qemu-devel/928a8552-ab62-9e6c-a492-d6453e338b9d@redhat.com/
[2] https://lore.kernel.org/qemu-devel/cover.1677628524.git.balaton@eik.bme.hu/
This reverts commit cef2e7148e.
Reported-by: Thomas Huth <thuth@redhat.com>
Inspired-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
QOM objects shouldn't access each other internals fields
except using the QOM API.
mips_cps_realize() instantiates a TYPE_MIPS_ITU object, and
directly sets the 'saar' pointer:
if (saar_present) {
s->itu.saar = &env->CP0_SAAR;
}
In order to avoid that, pass the MIPS_CPU object via a QOM
link property, and set the 'saar' pointer in mips_itu_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230203113650.78146-10-philmd@linaro.org>
Some length properties are signed, other unsigned:
hw/mips/cps.c:183: DEFINE_PROP_UINT32("num-vp", MIPSCPSState, num_vp, 1),
hw/mips/cps.c:184: DEFINE_PROP_UINT32("num-irq", MIPSCPSState, num_irq, 256),
hw/misc/mips_cmgcr.c:215: DEFINE_PROP_INT32("num-vp", MIPSGCRState, num_vps, 1),
hw/misc/mips_cpc.c:167: DEFINE_PROP_UINT32("num-vp", MIPSCPCState, num_vp, 0x1),
hw/misc/mips_itu.c:552: DEFINE_PROP_INT32("num-fifo", MIPSITUState, num_fifo,
hw/misc/mips_itu.c:554: DEFINE_PROP_INT32("num-semaphores", MIPSITUState,
Since negative values are not used (the minimum is '0'),
unify by declaring all properties as unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230203113650.78146-9-philmd@linaro.org>
Pick names that align with the section drivers should use them from,
avoiding the confusion of calling a _finalize() function from _exit()
and generalizing the actual _finalize() to handle removing the viommu
blocker.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/167820912978.606734.12740287349119694623.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
CXL uses PCI AER Internal errors to signal to the host that an error has
occurred. The host can then read more detailed status from the CXL RAS
capability.
For uncorrectable errors: support multiple injection in one operation
as this is needed to reliably test multiple header logging support in an
OS. The equivalent feature doesn't exist for correctable errors, so only
one error need be injected at a time.
Note:
- Header content needs to be manually specified in a fashion that
matches the specification for what can be in the header for each
error type.
Injection via QMP:
{ "execute": "qmp_capabilities" }
...
{ "execute": "cxl-inject-uncorrectable-errors",
"arguments": {
"path": "/machine/peripheral/cxl-pmem0",
"errors": [
{
"type": "cache-address-parity",
"header": [ 3, 4]
},
{
"type": "cache-data-parity",
"header": [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31]
},
{
"type": "internal",
"header": [ 1, 2, 4]
}
]
}}
...
{ "execute": "cxl-inject-correctable-error",
"arguments": {
"path": "/machine/peripheral/cxl-pmem0",
"type": "physical"
} }
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230302133709.30373-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This infrastructure will be reused for CXL RAS error injection
in patches that follow.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230302133709.30373-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
As these are about to be modified, fix the endian handle for
this set of registers rather than making it worse.
Note that CXL is currently only supported in QEMU on
x86 (arm64 patches out of tree) so we aren't going to yet hit
an problems with big endian. However it is good to avoid making
things worse for that support in the future.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230302133709.30373-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
This enables AER error injection to function as expected.
It is intended as a building block in enabling CXL RAS error injection
in the following patches.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Message-Id: <20230302133709.30373-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Done to avoid fixing ACPI route description of traditional PCI interrupts on q35
and because we should probably move with the times anyway.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Message-Id: <20230302133709.30373-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
We are missing necessary config write handling for AER emulation in
the CXL root port. Add it based on pcie_root_port.c
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Message-Id: <20230302133709.30373-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
PCIe r6.0 Figure 6-3 "Pseudo Logic Diagram for Selected Error Message Control
and Status Bits" includes a right hand branch under "All PCI Express devices"
that allows for messages to be generated or sent onwards without SERR#
being set as long as the appropriate per error class bit in the PCIe
Device Control Register is set.
Implement that branch thus enabling routing of ERR_COR, ERR_NONFATAL
and ERR_FATAL under OSes that set these bits appropriately (e.g. Linux)
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Message-Id: <20230302133709.30373-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
This register in AER should be both writeable and should
have a default value with a couple of the errors masked
including the Uncorrectable Internal Error used by CXL for
it's error reporting.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Message-Id: <20230302133709.30373-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Provide pcihp specific callback to check if bus is hotpluggable
and consolidate its scattered hotplug criteria there.
While at it clean up no longer needed
qbus_set_hotplug_handler(BUS(bus), NULL)
workarounds since callback makes qbus_is_hotpluggable() return
correct answer even if hotplug_handler is set on bus.
PS:
see ("pci: fix 'hotplugglable' property behavior") for details
why callback was introduced.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... instead of duplicating them in piix4 and lpc and then
trying to pass them to pcihp routines as arguments.
it simplifies call sites and places pcihp specific in
its own structure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generic PCI enumeration code doesn't really need access to
BSEL value, it is only used as means to decide if hotplug
enumerator should be called.
Use stateless object_property_find() to do that, and move
the rest of BSEL handling into build_append_pcihp_slots()
where it belongs.
This cleans up generic code a bit from hotplug stuff
and follow up patch will remove remaining call to
build_append_pcihp_slots() from generic code, making
it possible to use without ACPI PCI hotplug dependencies.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
previous commit ("pci: fix 'hotplugglable' property behavior") fixed
pcie root port's 'hotpluggable' property to behave consistently.
So we don't need a BSEL crutch anymore to see of device is not
hotpluggable, drop it from 'generic' PCI slots description handling.
BSEL is still used to decide if hotplug part should be called
but that will be moved out of generic code to hotplug one by
followup patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi-index is now working with non-hotpluggable buses
(pci/q35 machine hostbridge), it can be used even if
ACPI PCI hotplug is disabled and as result acpi-index
uniqueness check will be omitted (since the check is
done by ACPI PCI hotplug handler, which isn't wired
when ACPI PCI hotplug is disabled).
Move check and related code to generic PCIDevice so it
would be independent of ACPI PCI hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
describing all present devices on functions other than
0 was complicated when non hotplug and hotplug code
was intermixed. So QEMU has been excluding non zero
functions since they are not supported by hotplug code,
then a condition to whitelist coldplugged bridges was
added and later whitelisting of devices that advertise
presence of their own AML description.
With non hotplug and hotplug code separated, it is
possible to relax rules and allow describing all
non-hotpluggble functions and hence simplify
conditions whether PCI device should be enumerated by
generic (non-hotplug) code.
Price of that simplification is an extra few Device()
descriptors in DSDT exposing built-in chipset functions,
which has no functional effect on guest side.
Apart from that, the enumeration of non zero functions,
allows to attach more NICs with acpi-index enabled
directly on hostbridge (if hotplug is not required).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-25-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Inject static _DSM (EDSM) if non-hotpluggable device has
acpi-index configured on it.
It lets use acpi-index non-hotpluggable devices / devices
attached to non-hotpluggable bus.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-22-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it's a helper method for acpi-index support on PCI buses
that do no support or have disabled ACPI PCI hotplug
or for non-hotpluggble endpoint devices.
(like non-hotpluggble NICs, integrated endpoints and
later for machines that do not support ACPI PCI hotplug)
no functional change, commit adds only EDSM method in DSDT
without any users. (the follow up patches will use it)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be reused by follow up patches that will implement
static _DSM for non-hotpluggable devices.
no functional AML change, only context one, where 'cap' (Local1)
initialization is moved after UUID/revision checks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the property may flip its state
during VM bring up or just doesn't work as
the name implies.
In particular with PCIE root port that has
'hotplug={on|off}' property, and when it's
turned off, one would expect
'hotpluggable' == false
for any devices attached to it.
Which is not the case since qbus_is_hotpluggable()
used by the property just checks for presence
of any hotplug_handler set on bus.
The problem is that name BusState::hotplug_handler
from its inception is misnomer, as it handles
not only hotplug but also in many cases coldplug
as well (i.e. generic wiring interface), and
it's fine to have hotplug_handler set on bus
while it doesn't support hotplug (ex. pcie-slot
with hotplug=off).
Another case of root port flipping 'hotpluggable'
state when ACPI PCI hotplug is enabled in this
case root port with 'hotplug=off' starts as
hotpluggable and then later on, pcihp
hotplug_handler clears hotplug_handler
explicitly after checking root port's 'hotplug'
property.
So root-port hotpluggablity check sort of works
if pcihp is enabled but is broken if pcihp is
disabled.
One way to deal with the issue is to ask
hotplug_handler if bus it controls is hotpluggable
or not. To do that add is_hotpluggable_bus()
hook to HotplugHandler interface and use it in
'hotpluggable' property + teach pcie-slot to
actually look into 'hotplug' property state
before deciding if bus is hotpluggable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit [1] added ability to disable ACPI PCI hotplug
on hostbridge but forgot to take into account that it
should disable all ACPI hotplug machinery in case both
hostbridge and bridge hotplug are disabled.
Commit [2] tried to fix that, however it forgot to
remove hotplug_handler override which hands hotplug
control over to piix4 hotplug controller
(uninitialized after [2]).
As result at the time bridge is plugged in, its default
(SHPC) hotplug handler is replaced by piix4 one in
acpi_pcihp_device_plug_cb()
...
if (!s->legacy_piix &&
...
qbus_set_hotplug_handler(BUS(sec), OBJECT(hotplug_dev));
which is acting on uninitialized s->legacy_piix value
(0 by default) that was supposed to be initialized by
acpi_pcihp_init(), that is no longer called due to
following condition being false:
piix4_acpi_system_hot_add_init()
if (s->use_acpi_hotplug_bridge || s->use_acpi_root_pci_hotplug) {
and the bridge ends up with piix4 as hotplug handler
instead of shpc one.
Followup hotplug on that bridge as result yields
piix4 specific error:
Error: Unsupported bus. Bus doesn't have property 'acpi-pcihp-bsel' set
1) 3d7e78aa77 (Introduce a new flag for i440fx to disable PCI hotplug on the root bus)
2) df4008c9c5 (piix4: don't reserve hw resources when hotplug is off globally)
Fixes: df4008c9c5 (piix4: don't reserve hw resources when hotplug is off globally)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(I practice [1] hasn't broke anything since on hardware side we unset
hotplug_handler on such intermediate port => hotplug behind it has
never worked)
When deciding if bridge should be described, the original
condition was
cold_plugged_bridge && pcihp_bridge_en
which was replaced [1] by
bridge has ACPI_PCIHP_PROP_BSEL
the later however is not the same thing as the original
and flips to false if intermediate bridge has hotplug
turned off (root-port with 'hotplug=off' option).
Since we already in build_pci_bridge_aml(), the question
if it's bridge is answered. Use DeviceState::hotplugged
to make decision if bridge should describe its slots.
What's left out is pcihp_bridge_en, which tells us if
ACPI bridge hotplug is enabled.
With hotplug and non hotplug part now being mostly
separated, omitting this check will only lead to
colplugged bridges describe occupied slots in case
when ACPI bridge hotplug is disabled.
Which makes behavior consistent with occupied slots
on hostbridge.
Ex (pc/DSDT.hpbrroot diff):
...
Device (S20)
{
Name (_ADR, 0x00040000) // _ADR: Address
+ Device (S08)
+ {
+ Name (_ADR, 0x00010000) // _ADR: Address
+ }
+
+ Device (S10)
+ {
+ Name (_ADR, 0x00020000) // _ADR: Address
+ }
}
...
PS:
testing shows that above doesn't affect adversely guest OS
behavior: i.e. if ACPI bridge hotplug is enabled it's
expected behaviour, and with ACPI bridge hotplug is disabled
(a.k. native hotplug), it doesn't break slot enumeration
nor native hotplug. (tested with RHEL9.0 and WS2022).
1)
Fixes: 6c36ec46b0 ("pcihp: make bridge describe itself using AcpiDevAmlIfClass:build_dev_aml")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Beside BSEL numbers change (due to 2 extra root-ports in q35/miltibridge test),
following change is expected:
Scope (\_SB.PCI0)
{
...
+ Scope (S50)
+ {
+ Scope (S00)
+ {
+ Method (PCNT, 0, NotSerialized)
+ {
+ BNUM = Zero
+ DVNT (PCIU, One)
+ DVNT (PCID, 0x03)
+ }
+ }
+
+ Method (PCNT, 0, NotSerialized)
+ {
+ ^S00.PCNT
+ }
+ }
...
Method (PCNT, 0, NotSerialized)
{
+ ^S50.PCNT ()
^S13.PCNT ()
^S12.PCNT ()
^S11.PCNT ()
I practice [1] hasn't broke anything since on hardware side we unset
hotplug_handler on such intermediate port => hotplug behind it has
not been properly wired and as result not worked.
1)
Fixes: ddab4d3fae ("pcihp: compose PCNT callchain right before its user _GPE._E01")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa devices can return this feature now that blockers have been
set in case some features are not met.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-15-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches enable devices to be migrated even if vdpa netdev has not
been started with x-svq. However, not all devices are migratable, so we
need to block migration if we detect that.
Block migration if we detect the device expose a feature SVQ does not
know how to work with.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-13-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices with CVQ need to migrate state beyond vq state. Leaving this to
future series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-11-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although it does not make a big difference, its more correct and
simplifies the cleanup path in subsequent patches.
Move ram_block_discard_disable(false) call to the top of
vhost_vdpa_cleanup because:
* We cannot use vhost_vdpa_first_dev after dev->opaque = NULL
assignment.
* Improve the stack order in cleanup: since it is the last action taken
in init, it should be the first at cleanup.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-10-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function vhost.c:vhost_dev_stop calls vhost operation
vhost_dev_start(false). In the case of vdpa it totally reset and wipes
the device, making the fetching of the vring base (virtqueue state) totally
useless.
The kernel backend does not use vhost_dev_start vhost op callback, but
vhost-user do. A patch to make vhost_user_dev_start more similar to vdpa
is desirable, but it can be added on top.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-8-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function vhost.c:vhost_dev_stop fetches the vring base so the vq
state can be migrated to other devices. However, this is unreliable in
vdpa, since we didn't signal the device to suspend the queues, making
the value fetched useless.
Suspend the device if possible before fetching first and subsequent
vring bases.
Moreover, vdpa totally reset and wipes the device at the last device
before fetch its vrings base, making that operation useless in the last
device. This will be fixed in later patches of this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-7-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows vhost_vdpa to track if it is safe to get the vring base from
the device or not. If it is not, vhost can fall back to fetch idx from
the guest buffer again.
No functional change intended in this patch, later patches will use this
field.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-6-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At this moment it is only possible to migrate to a vdpa device running
with x-svq=on. As a protective measure, the rewind of the inflight
descriptors was done at the destination. That way if the source sent a
virtqueue with inuse descriptors they are always discarded.
Since this series allows to migrate also to passthrough devices with no
SVQ, the right thing to do is to rewind at the source so the base of
vrings are correct.
Support for inflight descriptors may be added in the future.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is needed for qemu to know it can suspend the device to retrieve
its status and enable SVQ with it, so all the process is transparent to
the guest.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-4-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As SVQ can be enabled dynamically at any time, it needs to store call fd
always.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move queue_index, CryptoDevCompletionFunc and opaque into struct
CryptoDevBackendOpInfo, then cryptodev_backend_crypto_operation()
needs an argument CryptoDevBackendOpInfo *op_info only. And remove
VirtIOCryptoReq from cryptodev. It's also possible to hide
VirtIOCryptoReq into virtio-crypto.c in the next step. (In theory,
VirtIOCryptoReq is a private structure used by virtio-crypto only)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-9-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce cryptodev service type in cryptodev.json, then apply this
to related codes. Now we can remove VIRTIO_CRYPTO_SERVICE_xxx
dependence from QEMU cryptodev.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-5-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce cryptodev alg type in cryptodev.json, then apply this to
related codes, and drop 'enum CryptoDevBackendAlgType'.
There are two options:
1, { 'enum': 'QCryptodevBackendAlgType',
'prefix': 'CRYPTODEV_BACKEND_ALG',
'data': ['sym', 'asym']}
Then we can keep 'CRYPTODEV_BACKEND_ALG_SYM' and avoid lots of
changes.
2, changes in this patch(with prefix 'QCRYPTODEV_BACKEND_ALG').
To avoid breaking the rule of QAPI, use 2 here.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-4-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that everything has been set up for device dirty page tracking,
query the device for device dirty page tracking support.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-15-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Migrating with vIOMMU will require either tracking maximum
IOMMU supported address space (e.g. 39/48 address width on Intel)
or range-track current mappings and dirty track the new ones
post starting dirty tracking. This will be done as a separate
series, so add a live migration blocker until that is fixed.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-14-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page bitmap sync functionality. This uses the device
DMA logging uAPI to sync dirty page bitmap from the device.
Device dirty page bitmap sync is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-13-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Extract the VFIO_IOMMU_DIRTY_PAGES ioctl code in vfio_get_dirty_bitmap()
to its own function.
This will help the code to be more readable after next patch will add
device dirty page bitmap sync functionality.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-12-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page tracking start/stop functionality. This uses the
device DMA logging uAPI to start and stop dirty page tracking by device.
Device dirty page tracking is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230307125450.62409-11-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
Now that all the work is done to enable the PV backends to work without
actual Xen, instantiate the bus from pc_basic_device_init() for emulated
mode.
This allows us finally to launch an emulated Xen guest with PV disk.
qemu-system-x86_64 -serial mon:stdio -M q35 -cpu host -display none \
-m 1G -smp 2 -accel kvm,xen-version=0x4000a,kernel-irqchip=split \
-kernel bzImage -append "console=ttyS0 root=/dev/xvda1" \
-drive file=/var/lib/libvirt/images/fedora28.qcow2,if=none,id=disk \
-device xen-disk,drive=disk,vdev=xvda
If we use -M pc instead of q35, we can even add an IDE disk and boot a
guest image normally through grub. But q35 gives us AHCI and that isn't
unplugged by the Xen magic, so the guests ends up seeing "both" disks.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is only part of it; we will also need to get the PV back end drivers
to tear down their own mappings (or do it for them, but they kind of need
to stop using the pointers too).
Some more work on the actual PV back ends and xen-bus code is going to be
needed to really make soft reset and migration fully functional, and this
part is the basis for that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
We don't actually access the guest's page through the grant, because
this isn't real Xen, and we can just use the page we gave it in the
first place. Map the grant anyway, mostly for cosmetic purposes so it
*looks* like it's in use in the guest-visible grant table.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Now that we have an internal implementation of XenStore, we can populate
the xenstore_backend_ops to allow PV backends to talk to it.
Watches can't be processed with immediate callbacks because that would
call back into XenBus code recursively. Defer them to a QEMUBH to be run
as appropriate from the main loop. We use a QEMUBH per XS handle, and it
walks all the watches (there shouldn't be many per handle) to fire any
which have pending events. We *could* have done it differently but this
allows us to use the same struct watch_event as we have for the guest
side, and keeps things relatively simple.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is limited to mapping a single grant at a time, because under Xen the
pages are mapped *contiguously* into qemu's address space, and that's very
hard to do when those pages actually come from anonymous mappings in qemu
in the first place.
Eventually perhaps we can look at using shared mappings of actual objects
for system RAM, and then we can make new mappings of the same backing
store (be it deleted files, shmem, whatever). But for now let's stick to
a page at a time.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
We provided the backend-facing evtchn functions very early on as part of
the core Xen platform support, since things like timers and xenstore need
to use them.
By what may or may not be an astonishing coincidence, those functions
just *happen* all to have exactly the right function prototypes to slot
into the evtchn_backend_ops table and be called by the PV backends.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Whem emulating Xen, multi-page grants are distinctly non-trivial and we
have elected not to support them for the time being. Don't advertise
them to the guest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The xen-block code ends up calling aio_poll() through blkconf_geometry(),
which means we see watch events during the indirect call to
xendev_class->realize() in xen_device_realize(). Unfortunately this call
is made before populating the initial frontend and backend device nodes
in xenstore and hence xen_block_frontend_changed() (which is called from
a watch event) fails to read the frontend's 'state' node, and hence
believes the device is being torn down. This in-turn sets the backend
state to XenbusStateClosed and causes the device to be deleted before it
is fully set up, leading to the crash.
By simply moving the call to xendev_class->realize() after the initial
xenstore nodes are populated, this sorry state of affairs is avoided.
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Now that we have the redirectable Xen backend operations we can build the
PV backends even without the Xen libraries.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This header is now only for native Xen code, not PV backends that may be
used in Xen emulation. Since the toolstack libraries may depend on the
specific version of Xen headers that they pull in (and will set the
__XEN_TOOLS__ macro to enable internal definitions that they depend on),
the rule is that xen_native.h (and thus the toolstack library headers)
must be included *before* any of the headers in include/hw/xen/interface.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
XC_PAGE_SIZE comes from the actual Xen libraries, while XEN_PAGE_SIZE is
provided by QEMU itself in xen_backend_ops.h. For backends which may be
built for emulation mode, use the latter.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
There's no need for this to be in the Xen accel code, and as we want to
use the Xen console support with KVM-emulated Xen we'll want to have a
platform-agnostic version of it. Make it use GString to build up the
path while we're at it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The previous commit introduced redirectable gnttab operations fairly
much like-for-like, with the exception of the extra arguments to the
->open() call which were always NULL/0 anyway.
This *changes* the arguments to the ->unmap() operation to include the
original ref# that was mapped. Under real Xen it isn't necessary; all we
need to do from QEMU is munmap(), then the kernel will release the grant,
and Xen does the tracking/refcounting for the guest.
When we have emulated grant tables though, we need to do all that for
ourselves. So let's have the back ends keep track of what they mapped
and pass it in to the ->unmap() method for us.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Move the existing code using libxengnttab to xen-operations.c and allow
the operations to be redirected so that we can add emulation of grant
table mapping for backend drivers.
In emulation, mapping more than one grant ref to be virtually contiguous
would be fairly difficult. The best way to do it might be to make the
ram_block mappings actually backed by a file (shmem or a deleted file,
perhaps) so that we can have multiple *shared* mappings of it. But that
would be fairly intrusive.
Making the backend drivers cope with page *lists* instead of expecting
the mapping to be contiguous is also non-trivial, since some structures
would actually *cross* page boundaries (e.g. the 32-bit blkif responses
which are 12 bytes).
So for now, we'll support only single-page mappings in emulation. Add a
XEN_GNTTAB_OP_FEATURE_MAP_MULTIPLE flag to indicate that the native Xen
implementation *does* support multi-page maps, and a helper function to
query it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The existing implementation calling into the real libxenevtchn moves to
a new file hw/xen/xen-operations.c, and is called via a function table
which in a subsequent commit will also be able to invoke the emulated
event channel support.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This implements the basic migration support in the back end, with unit
tests that give additional confidence in the node-counting already in
the tree.
However, the existing PV back ends like xen-disk don't support migration
yet. They will reset the ring and fail to continue where they left off.
We will fix that in future, but not in time for the 8.0 release.
Since there's also an open question of whether we want to serialize the
full XenStore or only the guest-owned nodes in /local/domain/${domid},
for now just mark the XenStore device as unmigratable.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Store perms as a GList of strings, check permissions.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Firing watches on the nodes that still exist is relatively easy; just
walk the tree and look at the nodes with refcount of one.
Firing watches on *deleted* nodes is more fun. We add 'modified_in_tx'
and 'deleted_in_tx' flags to each node. Nodes with those flags cannot
be shared, as they will always be unique to the transaction in which
they were created.
When xs_node_walk would need to *create* a node as scaffolding and it
encounters a deleted_in_tx node, it can resurrect it simply by clearing
its deleted_in_tx flag. If that node originally had any *data*, they're
gone, and the modified_in_tx flag will have been set when it was first
deleted.
We then attempt to send appropriate watches when the transaction is
committed, properly delete the deleted_in_tx nodes, and remove the
modified_in_tx flag from the others.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Given that the whole thing supported copy on write from the beginning,
transactions end up being fairly simple. On starting a transaction, just
take a ref of the existing root; swap it back in on a successful commit.
The main tree has a transaction ID too, and we keep a record of the last
transaction ID given out. if the main tree is ever modified when it isn't
the latest, it gets a new transaction ID.
A commit can only succeed if the main tree hasn't moved on since it was
forked. Strictly speaking, the XenStore protocol allows a transaction to
succeed as long as nothing *it* read or wrote has changed in the interim,
but no implementations do that; *any* change is sufficient to abort a
transaction.
This does not yet fire watches on the changed nodes on a commit. That bit
is more fun and will come in a follow-on commit.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Starts out fairly simple: a hash table of watches based on the path.
Except there can be multiple watches on the same path, so the watch ends
up being a simple linked list, and the head of that list is in the hash
table. Which makes removal a bit of a PITA but it's not so bad; we just
special-case "I had to remove the head of the list and now I have to
replace it in / remove it from the hash table". And if we don't remove
the head, it's a simple linked-list operation.
We do need to fire watches on *deleted* nodes, so instead of just a simple
xs_node_unref() on the topmost victim, we need to recurse down and fire
watches on them all.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is a fairly simple implementation of a copy-on-write tree.
The node walk function starts off at the root, with 'inplace == true'.
If it ever encounters a node with a refcount greater than one (including
the root node), then that node is shared with other trees, and cannot
be modified in place, so the inplace flag is cleared and we copy on
write from there on down.
Xenstore write has 'mkdir -p' semantics and will create the intermediate
nodes if they don't already exist, so in that case we flip the inplace
flag back to true as we populate the newly-created nodes.
We put a copy of the absolute path into the buffer in the struct walk_op,
with *two* NUL terminators at the end. As xs_node_walk() goes down the
tree, it replaces the next '/' separator with a NUL so that it can use
the 'child name' in place. The next recursion down then puts the '/'
back and repeats the exercise for the next path element... if it doesn't
hit that *second* NUL termination which indicates the true end of the
path.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This implements the basic wire protocol for the XenStore commands, punting
all the actual implementation to xs_impl_* functions which all just return
errors for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Modified BMC FRU data in yosemite v2 platform.
Tested: Tested and Verified in yosemitev2 platform.
Fixes: 34f73a81e6 ("hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU")
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307104833.3587947-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added TMP421 type sensor support in tiogapass platform.
Tested: Tested and verified in tiogapass platform.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307103334.3586755-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added TMP421 type support in yosemite v2 platform.
Tested: Tested and verified in yosemite V2 platform.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307095239.3583613-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit a4b15a8b introduced a new function blk_pread_nonzeroes(). Instead
of reading directly from the root node of the BlockBackend, it reads
from its 'file' child node. This can happen to mostly work for raw
images (as long as the 'raw' format driver is in use, but not actually
doing anything), but it breaks everything else.
Fix it to read from the root node instead.
Fixes: a4b15a8b9e
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230307140230.59158-1-kwolf@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Currently, when a block backend is attached to a m25p80 device and the
associated file size does not match the flash model, QEMU complains
with the error message "failed to read the initial flash content".
This is confusing for the user.
Instead, use helper blk_check_size_and_read_all() introduced by commit
06f1521795 ("pflash: Require backend size to match device, improve
errors").
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221115151000.2080833-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
According to the device DMA logging uAPI, IOVA ranges to be logged by
the device must be provided all at once upon DMA logging start.
As preparation for the following patches which will add device dirty
page tracking, keep a record of all DMA mapped IOVA ranges so later they
can be used for DMA logging start.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-10-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation to be used in device dirty tracking, move the code that
calculate a iova/end range from the container/section. This avoids
duplication on the common checks across listener callbacks.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-9-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The checks are replicated against region_add and region_del
and will be soon added in another memory listener dedicated
for dirty tracking.
Move these into a new helper for avoid duplication.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230307125450.62409-8-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation to turn more of the memory listener checks into
common functions, one of the affected places is how we trace when
sections are skipped. Right now there is one for each. Change it
into one single tracepoint `vfio_listener_region_skip` which receives
a name which refers to the callback i.e. region_add and region_del.
Suggested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-7-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the code that finds the container host DMA window against a iova
range. This avoids duplication on the common checks across listener
callbacks.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230307125450.62409-6-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are already two places where dirty page bitmap allocation and
calculations are done in open code.
To avoid code duplication, introduce VFIOBitmap struct and corresponding
alloc function and use them where applicable.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-5-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If VFIO dirty pages log start/stop/sync fails during migration,
migration should be aborted as pages dirtied by VFIO devices might not
be reported properly.
This is not the case today, where in such scenario only an error is
printed.
Fix it by aborting migration in the above scenario.
Fixes: 758b96b61d ("vfio/migrate: Move switch of dirty tracking into vfio_memory_listener")
Fixes: b6dd6504e3 ("vfio: Add vfio_listener_log_sync to mark dirty pages")
Fixes: 9e7b0442f2 ("vfio: Add ioctl to get dirty pages bitmap during dma unmap")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-4-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are several places where the %m conversion is used if one of
vfio_dma_map(), vfio_dma_unmap() or vfio_get_dirty_bitmap() fail.
The %m usage in these places is wrong since %m relies on errno value while
the above functions don't report errors via errno.
Fix it by using strerror() with the returned value instead.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-3-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.
-----BEGIN PGP SIGNATURE-----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=5gAt
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging
Sixth RISC-V PR for 8.0
* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQGYGgTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYidmyEAC6FEMbbFM5D++qR6w6xM6hXgzcrev6
# s1kyRRNVa45uSA78ti/Zi0hsDLNf7ZsNPndF0OIkkO5iAE0OVm3LU7tV1TqKcT82
# Dd9VXxe93zEmfnuJazHrMa54SXPhhnNdWHtKlZ6vBfZpbxgx0FFs50xkCsrM5LQZ
# hYHxQUqPWQTvF2MdDHrxCuLcdKl+Wg3ysCcgRh2d049KUBrIu6vNaHC2+AGRjCbj
# BkrGCkB82fTmVJjzAcVWQxLoAV12pCbJS4og1GtP8hA7WevtB39tbPin9siBKRZp
# QBeiIsg0nebkpmZGrb+xWVwlIBNe9yYwJa0KmveQk8v7L5RIzjM1mtDL91VrVljC
# KC2tfT570m0Iq2NoFMb3wd/kESHFzVDM/g+XYqRd4KSoiCNP/RbqYNQBwbMc31Tr
# E27xfA1D8w2vem0Rk20x3KgPf1Z5OmGXjq6YObTpnAzG8cZlA37qKBP+ortt5aHX
# GZSg3CAwknHHVajd4aaegkPsHxm1tRvoTfh38MwkPSNxaA9GD0nz0k9xaYDmeZ2L
# olfanNsaQEwcVUId31+7sAENg1TZU0fnj879/nxkMUCazVTdL8/mz+IoTTx0QCST
# 3+9ATWcyJUlmjbDKIs7kr1L+wJdvvHEJggPAbbPI8ekpXaLZvUYOT6ObzYKNAmwY
# wELQBn8QKXcLVA==
# =5gAt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 21:51:36 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu: (22 commits)
MAINTAINERS: Add entry for RISC-V ACPI
hw/riscv/virt.c: Initialize the ACPI tables
hw/riscv/virt: virt-acpi-build.c: Add RHCT Table
hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADT
hw/riscv/virt: Enable basic ACPI infrastructure
hw/riscv/virt: Add memmap pointer to RiscVVirtState
hw/riscv/virt: Add a switch to disable ACPI
hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fields
riscv: Correctly set the device-tree entry 'mmu-type'
riscv: Introduce satp mode hw capabilities
riscv: Allow user to set the satp mode
riscv: Change type of valid_vm_1_10_[32|64] to bool
riscv: Pass Object to register_cpu_props instead of DeviceState
roms/opensbi: Upgrade from v1.1 to v1.2
gitlab/opensbi: Move to docker:stable
hw: intc: Use cpu_by_arch_id to fetch CPU state
target/riscv: cpu: Implement get_arch_id callback
disas/riscv Fix ctzw disassemble
hw/riscv/virt.c: add cbo[mz]-block-size fdt properties
target/riscv: add Zicbop cbo.prefetch{i, r, m} placeholder
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure ordering between clearing the COMPUTING flag and checking
IRQFACT, and between setting the IRQFACT flag and checking
COMPUTING. This ensures that no wakeups are lost.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize the ACPI tables if the acpi option is not
disabled.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-8-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V ACPI platforms need to provide RISC-V Hart Capabilities
Table (RHCT). Add this to the ACPI tables.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-7-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add Multiple APIC Description Table (MADT) with the
RINTC structure for each cpu.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-6-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add basic ACPI infrastructure for RISC-V with below tables.
1) DSDT with below basic objects
- CPUs
- fw_cfg
2) FADT revision 6 with HW_REDUCED flag
3) XSDT
4) RSDP
Add this functionality in a new file virt-acpi-build.c and enable
building this infrastructure.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-5-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
memmap needs to be exported outside of virt.c so that
modules like acpi can use it. Hence, add a pointer field
in RiscVVirtState structure and initialize it with the
memorymap.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-4-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI will be enabled by default. Add a switch to turn off
for testing and debug purposes.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-3-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI needs OEM_ID and OEM_TABLE_ID for the machine. Add these fields
in the RISCVVirtState structure and initialize with default values.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230302091212.999767-2-sunilvl@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The 'mmu-type' should reflect what the hardware is capable of so use the
new satp_mode field in RISCVCPUConfig to do that.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-6-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Allwinner h3 has 4 twi(i2c) devices named twi0, twi1, twi2 and r_twi.
The registers are compatible with TYPE_AW_I2C_SUN6I, write 1 to clear
control register's INT_FLAG bit.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add emulation of TP4146 ("Flexible Data Placement").
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jesper Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for the Directive Send and Recv commands and the Identify
directive.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the mandatory Endurance Group identify data structures and log
pages.
For now, all namespaces in a subsystem belongs to a single Endurance
Group.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Each NvmeNamespace can be used by serveral controllers,
but a NvmeNamespace can at most belong to a single NvmeSubsystem.
Store a pointer to the NvmeSubsystem, if the namespace was realized
with a NvmeSubsystem.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Move the rounding of bytes read/written into nvme_smart_log which
reports in units of 512 bytes, rounded up in thousands. This is in
preparation for adding the Endurance Group Information log page which
reports in units of billions, rounded up.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Fedora 39 will ship its arm64 kernels in the new generic EFI zboot
format, using gzip compression for the payload.
For doing EFI boot in QEMU, this is completely transparent, as the
firmware or bootloader will take care of this. However, for direct
kernel boot without firmware, we will lose the ability to boot such
distro kernels unless we deal with the new format directly.
EFI zboot images contain metadata in the header regarding the placement
of the compressed payload inside the image, and the type of compression
used. This means we can wire up the existing gzip support without too
much hassle, by parsing the header and grabbing the payload from inside
the loaded zboot image.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20230303160109.3626966-1-ardb@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment formatting, fixed checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
xen_pt_config_reg_init() reads only that many bytes as the size of the
register that is being initialized. It uses
xen_host_pci_get_{byte,word,long} and casts its last argument to
expected pointer type. This means for smaller registers higher bits of
'val' are not initialized. Then, the function fails if any of those
higher bits are set.
Fix this by initializing 'val' with zero.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20230127050815.4155276-1-marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Intel specifies that the Intel IGD must occupy slot 2 on the PCI bus,
as noted in docs/igd-assign.txt in the Qemu source code.
Currently, when the xl toolstack is used to configure a Xen HVM guest with
Intel IGD passthrough to the guest with the Qemu upstream device model,
a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy
a different slot. This problem often prevents the guest from booting.
The only available workarounds are not good: Configure Xen HVM guests to
use the old and no longer maintained Qemu traditional device model
available from xenbits.xen.org which does reserve slot 2 for the Intel
IGD or use the "pc" machine type instead of the "xenfv" machine type and
add the xen platform device at slot 3 using a command line option
instead of patching qemu to fix the "xenfv" machine type directly. The
second workaround causes some degredation in startup performance such as
a longer boot time and reduced resolution of the grub menu that is
displayed on the monitor. This patch avoids that reduced startup
performance when using the Qemu upstream device model for Xen HVM guests
configured with the igd-passthru=on option.
To implement this feature in the Qemu upstream device model for Xen HVM
guests, introduce the following new functions, types, and macros:
* XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE
* XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS
* typedef XenPTQdevRealize function pointer
* XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2
* xen_igd_reserve_slot and xen_igd_clear_slot functions
Michael Tsirkin:
* Introduce XEN_PCI_IGD_DOMAIN, XEN_PCI_IGD_BUS, XEN_PCI_IGD_DEV, and
XEN_PCI_IGD_FN - use them to compute the value of XEN_PCI_IGD_SLOT_MASK
The new xen_igd_reserve_slot function uses the existing slot_reserved_mask
member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using
the xl toolstack with the gfx_passthru option enabled, which sets the
igd-passthru=on option to Qemu for the Xen HVM machine type.
The new xen_igd_reserve_slot function also needs to be implemented in
hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case
when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough,
in which case it does nothing.
The new xen_igd_clear_slot function overrides qdev->realize of the parent
PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus
since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was
created in hw/i386/pc_piix.c for the case when igd-passthru=on.
Move the call to xen_host_pci_device_get, and the associated error
handling, from xen_pt_realize to the new xen_igd_clear_slot function to
initialize the device class and vendor values which enables the checks for
the Intel IGD to succeed. The verification that the host device is an
Intel IGD to be passed through is done by checking the domain, bus, slot,
and function values as well as by checking that gfx_passthru is enabled,
the device class is VGA, and the device vendor in Intel.
Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <b1b4a21fe9a600b1322742dda55a40e9961daa57.1674346505.git.brchuckz@aol.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Qemu_get_cpu uses the logical CPU id assigned during init to fetch the
CPU state. However APLIC, IMSIC and ACLINT contain registers and states
which are specific to physical hart Ids. The hart Ids in any given system
might be sparse and hence calls to qemu_get_cpu need to be replaced by
cpu_by_arch_id which performs lookup based on the sparse physical hart IDs.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230303065055.915652-3-mchitale@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cbom-block-size fdt property property is used to inform the OS about
the blocksize in bytes for the Zicbom cache operations. Linux documents
it in Documentation/devicetree/bindings/riscv/cpus.yaml
as:
riscv,cbom-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The blocksize in bytes for the Zicbom cache operations.
cboz-block-size has the same role but for the Zicboz extension, i.e.
informs the size in bytes for Zicboz cache operations. Linux support
for it is under review/approval in [1]. Patch 3 of that series describes
cboz-block-size as:
riscv,cboz-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The blocksize in bytes for the Zicboz cache operations.
[1] https://lore.kernel.org/all/20230224162631.405473-1-ajones@ventanamicro.com/
Cc: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-ID: <20230302091406.407824-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
=VRNM
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-03-03:
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
# oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
# =VRNM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 21:24:38 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu:
pnv_phb4_pec: Simplify/align code to parent user-created PHBs
pnv_phb4_pec: Move pnv_phb4_get_pec() to rightful file
pnv_phb4_pec: Only export existing PHBs to the device tree
pnv_phb4_pec: Keep track of instantiated PHBs
target/ppc/translate: Add dummy implementation for dcblc instruction
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When instantiating a user-created PHB on P9/P10, we don't really have
a reason any more to go through an indirection in pnv_chip_add_phb()
in pnv.c, we can go straight to the right function in
pnv_phb4_pec.c. That way, default PHBs and user-created PHBs are all
handled in the same file. This patch also renames pnv_phb4_get_pec()
to pnv_pec_add_phb() to better reflect that it "hooks" a PHB to a PEC.
For P8, the PHBs are parented to the chip directly, so it makes sense
to keep calling pnv_chip_add_phb() in pnv.c, to also be consistent
with where default PHBs are handled. The only change here is that,
since that function is now only used for P8, we can refine the return
type.
So overall, the PnvPHB front-end now has a pnv_phb_user_get_parent()
function which handles the parenting of the user-created PHBs by
calling the right function in the right file based on the processor
version. It's also easily extensible if we ever need to support a
different parent object.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-5-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function pnv_phb4_get_pec() exposes some internals of the PEC and
PHB logic, yet it was in the higher level hw/ppc/pnv.c file for
historical reasons: P8 implements the PHBs from pnv.c directly, but on
P9/P10, it's done through the CEC model, which has its own file. So
move pnv_phb4_get_pec() to hw/pci-host/pnv_phb4_pec.c, where it fits
naturally.
While at it, replace the PnvPHB4 parameter by the PnvPHB front-end,
since it has all the information needed and simplify it a bit.
No functional changes.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-4-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, we were always exporting all possible PHBs to the device
tree. It works well when using the default config but it potentially
adds non-existing devices when using '-nodefaults' and user-created
PHBs, causing the firmware (skiboot) to report errors when probing
those PHBs. This patch only exports PHBs which have been realized to
the device tree.
Fixes: d786be3fe7 ("ppc/pnv: enable user created pnv-phb for powernv9")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-3-fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add an array on the PEC object to keep track of the PHBs which are
instantiated. The array can be sparsely populated when using
user-created PHBs. It will be useful for the next patch to only export
instantiated PHBs in the device tree.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20230302163715.129635-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
-----BEGIN PGP SIGNATURE-----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=ExnJ
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into staging
aspeed queue:
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7
# 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv
# JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X
# ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS
# n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D
# 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW
# MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL
# lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC
# 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN
# yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g
# msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd
# GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg=
# =ExnJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu:
aspeed/smc: Replace SysBus IRQs with GPIO lines
aspeed: Add a boot_rom overlap region in the SoC spi_boot container
aspeed: Introduce a spi_boot region under the SoC
aspeed/fuji : correct the eeprom size
hw/at24c : modify at24c to support 1 byte address mode
hw/arm/aspeed: Adding new machine Tiogapass in QEMU
hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU
tests/avocado/machine_aspeed.py: Add an I2C slave test
hw/misc: add a toy i2c echo device
hw/i2c: only schedule pending master when bus is idle
readline: fix hmp completion issue
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZAFb5wAKCRBAov/yOSY+
35hmA/sHIGXU5zQV6p6DBILFGEE6x91sPtV8WKY3zujVY0hsfD4SF6bKTaKJYisZ
EztZZ5/EunQcu/vfgO46YtYysEWzrzGiinbZ5lAjxk6sdlBYlfcTQLAQEEW3zPbP
qB3SiiGmGQ0iYFHIlkyi1tCF5OEmqqQKrHYrNVk6cGBoJle2PA==
=giPH
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230303
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZAFb5wAKCRBAov/yOSY+
# 35hmA/sHIGXU5zQV6p6DBILFGEE6x91sPtV8WKY3zujVY0hsfD4SF6bKTaKJYisZ
# EztZZ5/EunQcu/vfgO46YtYysEWzrzGiinbZ5lAjxk6sdlBYlfcTQLAQEEW3zPbP
# qB3SiiGmGQ0iYFHIlkyi1tCF5OEmqqQKrHYrNVk6cGBoJle2PA==
# =giPH
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 02:31:03 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu:
hw/loongarch/virt: add system_powerdown hmp command support
target/loongarch: Implement Chip Configuraiton Version Register(0x0000)
docs/system/loongarch: update loongson3.rst and rename it to virt.rst
loongarch: Add smbios command line option.
hw/loongarch/virt: rename PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
=hN3h
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
# lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
# cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
# 0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
# UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
# f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
# =hN3h
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 00:13:56 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
tests/data/acpi/virt: drop (most) duplicate files.
hw/cxl/mailbox: Use new UUID network order define for cel_uuid
qemu/uuid: Add UUID static initializer
qemu/bswap: Add const_le64()
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
hw/i386/acpi: Drop duplicate _UID entry for CXL root bridge
tests/acpi: Allow update of q35/DSDT.cxl
hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
hw/pci-bridge/cxl_downstream: Fix type naming mismatch
hw/mem/cxl_type3: Improve error handling in realize()
MAINTAINERS: Add Fan Ni as Compute eXpress Link QEMU reviewer
intel-iommu: send UNMAP notifications for domain or global inv desc
smmu: switch to use memory_region_unmap_iommu_notifier_range()
memory: introduce memory_region_unmap_iommu_notifier_range()
intel-iommu: fail DEVIOTLB_UNMAP without dt mode
intel-iommu: fail MAP notifier without caching mode
memory: Optimize replay of guest mapping
chardev/char-socket: set s->listener = NULL in char_socket_finalize
hw/pci: Trace IRQ routing on PCI topology
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
-----BEGIN PGP SIGNATURE-----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=FMkl
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu into staging
Fifth RISC-V PR for QEMU 8.0
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQBrrUTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYicHrD/9dHBDOYNwyT/C2Q31NHMcEsVN6J0kW
# 0sVyDb2/TUFoXmClMwS6jZYQQwWD7tjjB7BDcvPJ0QKLblDoZFX5JyxpQypIKWcs
# It/E6mk7aG0epH1GoB/mbHFDbeCm4tbo7Vf6cQGpV/vGWBUaOS67c5nenUK7Tlqw
# NTr9qak+9NYVswvMHZ0lUKtO12W1g/1EVkict2/90P2snWbPZ+foWomifGNljmhy
# 5WtCNp27uBKF/uuD9xubLOxSEcqtZFTuKJy7U3azV4I0IKfd6Is83Kd0IwBOrTgT
# MYkFdtQE1jgbkXYVZjft6ymLuqJrcLFYwD8C2zdNAXJLk1Y+MCtGafgW6f6SkT6B
# FrNaSOqQ9xXiaNStF2FwYdmZ476zcY+eEg2rH1grTwCMewZ9r7m3+H8iat/tR0pt
# 9scYAre1oaL33LB6DGZi3JkssNYyj42sutcNao2hQXRHcsh+vv1dLR+Di2mO6Ji5
# MNfvEgCrWWZjNVSwvhwCXdJPqqpyTbkRf8HJEp0gWvjk6VoF8sWidDw/8oMLj+wW
# qZur7GNe+piJNvly85aFSL9J3SX7RyNeDzX/yK3b4k+g6I/ZziQaNgQtB9gYcm6w
# mj3snCwRbEMEhdhPH0+Chm0Wb97knHJS14Vq9wCe2xh16o3HM5FspboLFkGZMjDV
# tRDPFb7pitwdlA==
# =FMkl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 08:24:21 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu: (59 commits)
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig
target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers
target/riscv/csr.c: simplify mctr()
target/riscv/csr.c: use env_archcpu() in ctr()
target/riscv: Export Svadu property
target/riscv: Add *envcfg.HADE related check in address translation
target/riscv: Add *envcfg.PBMTE related check in address translation
target/riscv: Add csr support for svadu
target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg
target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions
hw/riscv: Move the dtb load bits outside of create_fdt()
hw/riscv: Skip re-generating DT nodes for a given DTB
target/riscv: Add support for Zicond extension
RISC-V: XTheadMemPair: Remove register restrictions for store-pair
target/riscv: Fix checking of whether instruciton at 'pc_next' spans pages
target/riscv: Group all predicate() routines together
target/riscv: Drop priv level check in mseccfg predicate()
target/riscv: Allow debugger to access sstc CSRs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For loongarch virt machine, add powerdown notification callback
and send ACPI_POWER_DOWN_STATUS event by acpi ged. Also add
acpi dsdt table for ACPI_POWER_BUTTON_DEVICE device in this
patch.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230303010548.295580-1-gaosong@loongson.cn>
In theory gsi base can start from 0 on loongarch virt machine,
however gsi base is hard-coded in linux kernel loongarch system,
else system fails to boot.
This patch renames macro PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE,
keeps value unchanged. GSI base is common concept in acpi spec
and easy to understand.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221228030719.991878-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The cel_uuid was programatically generated previously because there was
no static initializer for network order UUIDs.
Use the new network order initializer for cel_uuid. Adjust
cxl_initialize_mailbox() because it can't fail now.
Update specification reference.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-11-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Noticed as this prevents iASL disasembling the DSDT table.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove usage of magic numbers when accessing capacity fields and replace
with CXL_CAPACITY_MULTIPLIER, matching the kernel definition.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current code sets to STORAGE_EXPRESS and then overrides it.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix capitalization difference between struct name and typedef.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msix_init_exclusive_bar() can fail, so if it does cleanup the address space.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't send UNMAP notification upon domain or global invalidation
which will lead the notifier can't work correctly. One example is to
use vhost remote IOTLB without enabling device IOTLB.
Fixing this by sending UNMAP notification.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-6-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-5-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without dt mode, device IOTLB notifier won't work since guest won't
send device IOTLB invalidation descriptor in this case. Let's fail
early instead of misbehaving silently.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Viktor Prutyanov <viktor@daynix.com>
Buglink: https://bugzilla.redhat.com/2156876
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-3-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without caching mode, MAP notifier won't work correctly since guest
won't send IOTLB update event when it establishes new mappings in the
I/O page tables. Let's fail the IOMMU notifiers early instead of
misbehaving silently.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Viktor Prutyanov <viktor@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-2-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On x86, there are two notifiers registered due to vtd-ir memory region
splitting the whole address space. During replay of the address space
for each notifier, the whole address space is scanned which is
unnecessory.
We only need to scan the space belong to notifier montiored space.
Assert when notifier is used to monitor beyond iommu memory region's
address space.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20230215065238.713041-1-zhenzhong.duan@intel.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trace how IRQ are rooted from EP to RC.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230211152239.88106-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In vhost_svq_poll(), if vhost_svq_get_buf() fails due to a device
providing invalid descriptors, len is left uninitialized and returned
to the caller, potentally leaking stack data or causing undefined
behavior.
Fix this by initializing len to 0.
Found with GCC 13 and -fanalyzer (abridged):
../hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_svq_poll’:
../hw/virtio/vhost-shadow-virtqueue.c:538:12: warning: use of uninitialized value ‘len’ [CWE-457] [-Wanalyzer-use-of-uninitialized-value]
538 | return len;
| ^~~
‘vhost_svq_poll’: events 1-4
|
| 522 | size_t vhost_svq_poll(VhostShadowVirtqueue *svq)
| | ^~~~~~~~~~~~~~
| | |
| | (1) entry to ‘vhost_svq_poll’
|......
| 525 | uint32_t len;
| | ~~~
| | |
| | (2) region created on stack here
| | (3) capacity: 4 bytes
|......
| 528 | if (vhost_svq_more_used(svq)) {
| | ~
| | |
| | (4) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_poll’
(...)
| 528 | if (vhost_svq_more_used(svq)) {
| | ^~~~~~~~~~~~~~~~~~~~~~~~~
| | ||
| | |(8) ...to here
| | (7) following ‘true’ branch...
|......
| 537 | vhost_svq_get_buf(svq, &len);
| | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (9) calling ‘vhost_svq_get_buf’ from ‘vhost_svq_poll’
|
+--> ‘vhost_svq_get_buf’: events 10-11
|
| 416 | static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq,
| | ^~~~~~~~~~~~~~~~~
| | |
| | (10) entry to ‘vhost_svq_get_buf’
|......
| 423 | if (!vhost_svq_more_used(svq)) {
| | ~
| | |
| | (11) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_get_buf’
|
(...)
|
‘vhost_svq_get_buf’: event 14
|
| 423 | if (!vhost_svq_more_used(svq)) {
| | ^
| | |
| | (14) following ‘false’ branch...
|
‘vhost_svq_get_buf’: event 15
|
|cc1:
| (15): ...to here
|
<------+
|
‘vhost_svq_poll’: events 16-17
|
| 537 | vhost_svq_get_buf(svq, &len);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (16) returning to ‘vhost_svq_poll’ from ‘vhost_svq_get_buf’
| 538 | return len;
| | ~~~
| | |
| | (17) use of uninitialized value ‘len’ here
Note by Laurent Vivier <lvivier@redhat.com>:
The return value is only used to detect an error:
vhost_svq_poll
vhost_vdpa_net_cvq_add
vhost_vdpa_net_load_cmd
vhost_vdpa_net_load_mac
-> a negative return is only used to detect error
vhost_vdpa_net_load_mq
-> a negative return is only used to detect error
vhost_vdpa_net_handle_ctrl_avail
-> a negative return is only used to detect error
Fixes: d368c0b052 ("vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush")
Signed-off-by: Carlos López <clopez@suse.de>
Message-Id: <20230213085747.19956-1-clopez@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It should not be zero, the only valid values are ON, OFF and BLINK.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-13-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's cleaner and removes the curious '+ 1' required to skip the DMA
IRQ line of the controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
To avoid the SPI transactions fetching instructions from the FMC CE0
flash device and speed up boot, a ROM can be created if a drive is
available.
Reverse the logic to allow a machine to boot without a drive, using a
block device instead :
-blockdev node-name=fmc0,driver=file,filename=/path/to/flash.img \
-device mx66u51235f,bus=ssi.0,drive=fmc0
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The default boot address of the Aspeed SoCs is 0x0. For this reason,
the FMC flash device contents are remapped by HW on the first 256MB of
the address space. In QEMU, this is currently done in the machine init
with the setup of a region alias.
Move this code to the SoC and introduce an extra container to prepare
ground for the boot ROM region which will overlap the FMC flash
remapping.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch support Tiogapass in QEMU environment.
and introduced EEPROM BMC FRU data support "add tiogapass_bmc_fruid data"
along with the machine support.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - commit log topic update
- checkpatch issues
- Documentation update ]
Message-Id: <20230216184342.253868-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch support Yosemitev2 in QEMU environment.
and introduced EEPROM BMC FRU data support "add fbyv2_bmc_fruid data"
along with the machine support.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - commit log topic update
- Documentation update ]
Message-Id: <20230216133326.216017-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add an example I2C device to demonstrate how a slave may master the bus
and send data asynchronously to another slave.
The device will echo whatever it is sent to the device identified by the
first byte received.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: integrated fixes :
https://lore.kernel.org/qemu-devel/Y3yMKAhOkYGtnkOp@cormorant.local/ ]
Message-Id: <20220601210831.67259-7-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It is not given that the current master will release the bus after a
transfer ends. Only schedule a pending master if the bus is idle.
Fixes: 37fa5ca426 ("hw/i2c: support multiple masters")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20221116084312.35808-2-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In pcie_cap_slot_write_config() we check for PCI_EXP_SLTCTL_PWR_OFF in
a bad form. We should distinguish PCI_EXP_SLTCTL_PWR which is a "mask"
and PCI_EXP_SLTCTL_PWR_OFF which is value for that mask.
Better code is in pcie_cap_slot_unplug_request_cb() and in
pcie_cap_update_power(). Let's use same pattern everywhere. To simplify
things add also a helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-12-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
*_by_mask() helpers shouldn't be used here (and that's the only one).
*_by_mask() helpers do shift their value argument, but in pcie.c code
we use values that are already shifted appropriately.
Happily, PCI_EXP_SLTCTL_PWR_ON is zero, so shift doesn't matter. But if
we apply same helper for PCI_EXP_SLTCTL_PWR_OFF constant it will do
wrong thing.
So, let's use instead pci_word_test_and_clear_mask() which is already
used in the file to clear PCI_EXP_SLTCTL_PWR_OFF bit in
pcie_cap_slot_init() and pcie_cap_slot_reset().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-11-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have indicator values in
include/standard-headers/linux/pci_regs.h , no reason to reinvent them
in include/hw/pci/pcie_regs.h. (and we already have usage of
PCI_EXP_SLTCTL_PWR_IND_BLINK and PCI_EXP_SLTCTL_PWR_IND_OFF in
hw/pci/pcie.c, so let's be consistent)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-9-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI_EXP_SLTCTL_PIC_OFF is a value, and PCI_EXP_SLTCTL_PIC is a mask.
Happily PCI_EXP_SLTCTL_PIC_OFF is a maximum value for this mask and is
equal to the mask itself. Still the code looks like a bug. Let's make
it more reader-friendly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-8-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename it to shpc_device_get_slot(), to mention what it does rather
than how it is used. It also helps to reuse it in further commit.
Also, add a return value and get rid of local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-7-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We'll need it in further patch to report bridge in QAPI event.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-6-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Free slot if both conditions (power-led = OFF and state = DISABLED)
becomes true regardless of the sequence. It is similar to how PCIe
hotplug works.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-5-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ENABLED -> PWRONLY transition is not allowed and we handle it by
shpc_invalid_command(). But PWRONLY -> ENABLED transition is silently
ignored, which seems wrong. Let's handle it as correct.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-4-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The result of the function is always one byte. The result is always
assigned to uint8_t variable. Also, shpc_get_status() should be
symmetric to shpc_set_status() which has uint8_t value argument.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
0 is not a valid state for the led. Let's start with OFF.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not stopping them leave the device in a bad state when virtio-net
fronted device is unplugged with device_del monitor command.
This is not triggable in regular poweroff or qemu forces shutdown
because cleanup is called right after vhost_vdpa_dev_start(false). But
devices hot unplug does not call vdpa device cleanups. This lead to all
the vhost_vdpa devices without stop the SVQ but the last.
Fix it and clean the code, making it symmetric with
vhost_vdpa_svqs_start.
Fixes: dff4426fa6 ("vhost: Add Shadow VirtQueue kick forwarding capabilities")
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230209170004.899472-1-eperezma@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The Vhost-user specification changed feature and request
naming from _SLAVE_ to _BACKEND_.
This patch adopts the new naming convention.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230208203259.381326-4-maxime.coquelin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The expiration time provided for timer_mod() can overflow if a
ridiculously large value is set to the comparator register. The
resulting value can represent a past time after rounded, forcing the
timer to fire immediately. If the timer is configured as periodic, it
will rearm the timer again, and form an endless loop.
Check if the expiration value will overflow, and if it will, stop the
timer instead of rearming the timer with the overflowed time.
This bug was found by Alexander Bulekov when fuzzing igb, a new
network device emulation:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
The fixed test case is:
fuzz/crash_2d7036941dcda1ad4380bb8a9174ed0c949bcefd
Fixes: 16b29ae180 ("Add HPET emulation to qemu (Beth Kon)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230131030037.18856-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In bad9c5a516 ("virtio-rng-pci: fix migration compat for vectors") I
fixed the virtio-rng-pci migration compatibility, but it was discovered
that we also need to fix the other aliases of the device for the
transitional cases.
Fixes: 9ea02e8f1 ('virtio-rng-pci: Allow setting nvectors, so we can use MSI-X')
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2162569
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230207174944.138255-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free
the memory pointed by the member.
Fixes: 821d28b88f ("vhost-user-rng: Add vhost-user-rng implementation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140516.78078-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free
the memory pointed by the member.
Fixes: 7221d3b634 ("hw/virtio: add boilerplate for vhost-user-i2c device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140435.78049-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_cleanup(), called from vu_gpio_disconnect(), clears vhost_dev
so vhost-user-gpio must set the members of vhost_dev each time
connecting.
do_vhost_user_cleanup() should also acquire the pointer to vqs directly
from VHostUserGPIO instead of referring to vhost_dev as it can be called
after vhost_dev_cleanup().
Fixes: 27ba7b027f ("hw/virtio: add boilerplate for vhost-user-gpio device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140320.77999-1-akihiko.odaki@daynix.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since GUEST_ANNOUNCE is emulated the feature bit could be set without
backend support. This happens in the vDPA case.
However, backend vDPA parent may not have CVQ support. This causes an
incoherent feature set, and the driver may refuse to start. This
happens in virtio-net Linux driver.
This may be solved differently in the future. Qemu is able to emulate a
CVQ just for guest_announce purposes, helping guest to notify the new
location with vDPA devices that does not support it. However, this is
left as a TODO as it is way more complex to backport.
Tested with vdpa_net_sim, toggling manually VIRTIO_NET_F_CTRL_VQ in the
driver and migrating it with x-svq=on.
Fixes: 980003debd ("vdpa: do not handle VIRTIO_NET_F_GUEST_ANNOUNCE in vhost-vdpa")
Reported-by: Dawar, Gautam <gautam.dawar@amd.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230124161159.2182117-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
Tested-by: Gautam Dawar <gautam.dawar@amd.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This reverts commit 67f7e426e5.
Additionally to the automatic revert, I went over the code
and dropped all mentions of legacy_no_rng_seed manually,
effectively reverting a combination of 2 additional commits:
commit ffe2d2382e
Author: Jason A. Donenfeld <Jason@zx2c4.com>
Date: Wed Sep 21 11:31:34 2022 +0200
x86: re-enable rng seeding via SetupData
commit 3824e25db1
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Aug 17 10:39:40 2022 +0200
x86: disable rng seeding via setup_data
Fixes: 67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit e935b73508.
Fixes: e935b73508 ("x86: return modified setup_data only if read as memory, not as file")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit eebb38a563.
Fixes: eebb38a563 ("x86: use typedef for SetupData struct")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 763a2828bf.
Fixes: 763a2828bf ("x86: reinitialize RNG seed on system reboot")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit cc63374a5a.
Fixes: cc63374a5a ("x86: re-initialize RNG seed when selecting kernel")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 14b29fea74.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 14b29fea74 ("x86: do not re-randomize RNG seed on snapshot load")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit eac7a7791b.
Fixes: eac7a7791b ("x86: don't let decompressed kernel image clobber setup_data")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since table type 4 of SMBIOS version 2.6 is shorter than 3.0, the
strings which follow immediately after the struct fields have been
overwritten by unconditional filling of later fields such as core_count2.
Make these fields dependent on the SMBIOS version.
Fixes: 05e27d74c7 ("hw/smbios: add core_count2 to smbios table type 4")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2169904
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20230223125747.254914-1-jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the dtb load bits outside of create_fdt(), and put it explicitly
in sifive_u_machine_init() and virt_machine_init(). With such change
create_fdt() does exactly what its function name tells us.
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Launch qemu-system-riscv64 with a given dtb for 'sifive_u' and 'virt'
machines, QEMU complains:
qemu_fdt_add_subnode: Failed to create subnode /soc: FDT_ERR_EXISTS
The whole DT generation logic should be skipped when a given DTB is
present.
Fixes: b1f19f238c ("hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-1-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Read cpu_ptr->cfg.mmu directly. As a bonus, use cpu_ptr in
riscv_isa_string().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-9-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This adds support for emulating Xen under Linux/KVM, based on kernel
patches which have been present since Linux v5.12. As with the kernel
support, it's derived from work started by João Martins of Oracle in
2018.
This series just adds the basic platform support — CPUID, hypercalls,
event channels, a stub of XenStore.
A full single-tenant internal implementation of XenStore, and patches
to make QEMU's Xen PV drivers work with this Xen emulation, are waiting
in the wings to be submitted in a follow-on patch series.
As noted in the documentation, it's enabled by setting the xen-version
property on the KVM accelerator, e.g.:
qemu-system-x86_64 -serial mon:stdio -M q35 -display none -m 1G -smp 2 \
-accel kvm,xen-version=0x4000e,kernel-irqchip=split \
-kernel vmlinuz-6.0.7-301.fc37.x86_64 \
-append "console=ttyS0 root=/dev/sda1" \
-drive file=/var/lib/libvirt/images/fedora28.qcow2,if=none,id=disk \
-device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0
Even before this was merged, we've already been using it to find and fix
bugs in the Linux kernel Xen guest support:
https://lore.kernel.org/all/4bffa69a949bfdc92c4a18e5a1c3cbb3b94a0d32.camel@infradead.org/https://lore.kernel.org/all/871qnunycr.ffs@tglx/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report which machine types support ACPI so that management applications
can properly use the 'acpi' property even on platforms such as ARM where
support for ACPI depends on the machine type and thus checking presence
of '-machine acpi=' in 'query-command-line-options' is insufficient.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <537625d3e25d345052322c42ca19812b98b4f49a.1677571792.git.pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every caller of xen_be_init() checks and exits on error, then calls
xen_be_register_common(). Just make xen_be_init() abort for itself and
return void, and register the common devices too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The default number of PIRQs is set to 256 to avoid issues with 32-bit MSI
devices. Allow it to be increased if the user desires.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The way that Xen handles MSI PIRQs is kind of awful.
There is a special MSI message which targets a PIRQ. The vector in the
low bits of data must be zero. The low 8 bits of the PIRQ# are in the
destination ID field, the extended destination ID field is unused, and
instead the high bits of the PIRQ# are in the high 32 bits of the address.
Using the high bits of the address means that we can't intercept and
translate these messages in kvm_send_msi(), because they won't be caught
by the APIC — addresses like 0x1000fee46000 aren't in the APIC's range.
So we catch them in pci_msi_trigger() instead, and deliver the event
channel directly.
That isn't even the worst part. The worst part is that Xen snoops on
writes to devices' MSI vectors while they are *masked*. When a MSI
message is written which looks like it targets a PIRQ, it remembers
the device and vector for later.
When the guest makes a hypercall to bind that PIRQ# (snooped from a
marked MSI vector) to an event channel port, Xen *unmasks* that MSI
vector on the device. Xen guests using PIRQ delivery of MSI don't
ever actually unmask the MSI for themselves.
Now that this is working we can finally enable XENFEAT_hvm_pirqs and
let the guest use it all.
Tested with passthrough igb and emulated e1000e + AHCI.
CPU0 CPU1
0: 65 0 IO-APIC 2-edge timer
1: 0 14 xen-pirq 1-ioapic-edge i8042
4: 0 846 xen-pirq 4-ioapic-edge ttyS0
8: 1 0 xen-pirq 8-ioapic-edge rtc0
9: 0 0 xen-pirq 9-ioapic-level acpi
12: 257 0 xen-pirq 12-ioapic-edge i8042
24: 9600 0 xen-percpu -virq timer0
25: 2758 0 xen-percpu -ipi resched0
26: 0 0 xen-percpu -ipi callfunc0
27: 0 0 xen-percpu -virq debug0
28: 1526 0 xen-percpu -ipi callfuncsingle0
29: 0 0 xen-percpu -ipi spinlock0
30: 0 8608 xen-percpu -virq timer1
31: 0 874 xen-percpu -ipi resched1
32: 0 0 xen-percpu -ipi callfunc1
33: 0 0 xen-percpu -virq debug1
34: 0 1617 xen-percpu -ipi callfuncsingle1
35: 0 0 xen-percpu -ipi spinlock1
36: 8 0 xen-dyn -event xenbus
37: 0 6046 xen-pirq -msi ahci[0000:00:03.0]
38: 1 0 xen-pirq -msi-x ens4
39: 0 73 xen-pirq -msi-x ens4-rx-0
40: 14 0 xen-pirq -msi-x ens4-rx-1
41: 0 32 xen-pirq -msi-x ens4-tx-0
42: 47 0 xen-pirq -msi-x ens4-tx-1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This wires up the basic infrastructure but the actual interrupts aren't
there yet, so don't advertise it to the guest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Just hook up the basic hypercalls to stubs in xen_evtchn.c for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
It isn't strictly mandatory but Linux guests at least will only map
their grant tables over the dummy BAR that it provides, and don't have
sufficient wit to map them in any other unused part of their guest
address space. So include it by default for minimal surprise factor.
As I come to document "how to run a Xen guest in QEMU", this means one
fewer thing to tell the user about, according to the mantra of "if it
needs documenting, fix it first, then document what remains".
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Extract requests, return ENOSYS to all of them. This is enough to allow
older Linux guests to boot, as they need *something* back but it doesn't
matter much what.
A full implementation of a single-tentant internal XenStore copy-on-write
tree with transactions and watches is waiting in the wings to be sent in
a subsequent round of patches along with hooking up the actual PV disk
back end in qemu, but this is enough to get guests booting for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Just the basic shell, with the event channel hookup. It only dumps the
buffer for now; a real ring implmentation will come in a subsequent patch.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The provides the QEMU side of interdomain event channels, allowing events
to be sent to/from the guest.
The API mirrors libxenevtchn, and in time both this and the real Xen one
will be available through ops structures so that the PV backend drivers
can use the correct one as appropriate.
For now, this implementation can be used directly by our XenStore which
will be for emulated mode only.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Introduce support for one shot and periodic mode of Xen PV timers,
whereby timer interrupts come through a special virq event channel
with deadlines being set through:
1) set_timer_op hypercall (only oneshot)
2) vcpu_op hypercall for {set,stop}_{singleshot,periodic}_timer
hypercalls
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The guest is permitted to specify an arbitrary domain/bus/device/function
and INTX pin from which the callback IRQ shall appear to have come.
In QEMU we can only easily do this for devices that actually exist, and
even that requires us "knowing" that it's a PCMachine in order to find
the PCI root bus — although that's OK really because it's always true.
We also don't get to get notified of INTX routing changes, because we
can't do that as a passive observer; if we try to register a notifier
it will overwrite any existing notifier callback on the device.
But in practice, guests using PCI_INTX will only ever use pin A on the
Xen platform device, and won't swizzle the INTX routing after they set
it up. So this is just fine.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The GSI callback (and later PCI_INTX) is a level triggered interrupt. It
is asserted when an event channel is delivered to vCPU0, and is supposed
to be cleared when the vcpu_info->evtchn_upcall_pending field for vCPU0
is cleared again.
Thankfully, Xen does *not* assert the GSI if the guest sets its own
evtchn_upcall_pending field; we only need to assert the GSI when we
have delivered an event for ourselves. So that's the easy part, kind of.
There's a slight complexity in that we need to hold the BQL before we
can call qemu_set_irq(), and we definitely can't do that while holding
our own port_lock (because we'll need to take that from the qemu-side
functions that the PV backend drivers will call). So if we end up
wanting to set the IRQ in a context where we *don't* already hold the
BQL, defer to a BH.
However, we *do* need to poll for the evtchn_upcall_pending flag being
cleared. In an ideal world we would poll that when the EOI happens on
the PIC/IOAPIC. That's how it works in the kernel with the VFIO eventfd
pairs — one is used to trigger the interrupt, and the other works in the
other direction to 'resample' on EOI, and trigger the first eventfd
again if the line is still active.
However, QEMU doesn't seem to do that. Even VFIO level interrupts seem
to be supported by temporarily unmapping the device's BARs from the
guest when an interrupt happens, then trapping *all* MMIO to the device
and sending the 'resample' event on *every* MMIO access until the IRQ
is cleared! Maybe in future we'll plumb the 'resample' concept through
QEMU's irq framework but for now we'll do what Xen itself does: just
check the flag on every vmexit if the upcall GSI is known to be
asserted.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Specifically add listing, injection of event channels.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Add the array of virq ports to each vCPU so that we can deliver timers,
debug ports, etc. Global virqs are allocated against vCPU 0 initially,
but can be migrated to other vCPUs (when we implement that).
The kernel needs to know about VIRQ_TIMER in order to accelerate timers,
so tell it via KVM_XEN_VCPU_ATTR_TYPE_TIMER. Also save/restore the value
of the singleshot timer across migration, as the kernel will handle the
hypercalls automatically now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This finally comes with a mechanism for actually injecting events into
the guest vCPU, with all the atomic-test-and-set that's involved in
setting the bit in the shinfo, then the index in the vcpu_info, and
injecting either the lapic vector as MSI, or letting KVM inject the
bare vector.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
It calls an internal close_port() helper which will also be used from
EVTCHNOP_reset and will actually do the work to disconnect/unbind a port
once any of that is actually implemented in the first place.
That in turn calls a free_port() internal function which will be in
error paths after allocation.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This adds the basic structure for maintaining the port table and reporting
the status of ports therein.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Include basic support for setting HVM_PARAM_CALLBACK_IRQ to the global
vector method HVM_PARAM_CALLBACK_TYPE_VECTOR, which is handled in-kernel
by raising the vector whenever the vCPU's vcpu_info->evtchn_upcall_pending
flag is set.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Xen will "latch" the guest's 32-bit or 64-bit ("long mode") setting when
the guest writes the MSR to fill in the hypercall page, or when the guest
sets the event channel callback in HVM_PARAM_CALLBACK_IRQ.
KVM handles the former and sets the kernel's long_mode flag accordingly.
The latter will be handled in userspace. Keep them in sync by noticing
when a hypercall is made in a mode that doesn't match qemu's idea of
the guest mode, and resyncing from the kernel. Do that same sync right
before serialization too, in case the guest has set the hypercall page
but hasn't yet made a system call.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The xen_overlay device (and later similar devices for event channels and
grant tables) need to be instantiated. Do this from a kvm_type method on
the PC machine derivatives, since KVM is only way to support Xen emulation
for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
For the shared info page and for grant tables, Xen shares its own pages
from the "Xen heap" to the guest. The guest requests that a given page
from a certain address space (XENMAPSPACE_shared_info, etc.) be mapped
to a given GPA using the XENMEM_add_to_physmap hypercall.
To support that in qemu when *emulating* Xen, create a memory region
(migratable) and allow it to be mapped as an overlay when requested.
Xen theoretically allows the same page to be mapped multiple times
into the guest, but that's hard to track and reinstate over migration,
so we automatically *unmap* any previous mapping when creating a new
one. This approach has been used in production with.... a non-trivial
number of guests expecting true Xen, without any problems yet being
noticed.
This adds just the shared info page for now. The grant tables will be
a larger region, and will need to be overlaid one page at a time. I
think that means I need to create separate aliases for each page of
the overall grant_frames region, so that they can be mapped individually.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The only thing we need to fix to make this build is the PIO hack which
sets the BIOS memory areas to R/W v.s. R/O. Theoretically we could hook
that up to the PAM registers on the emulated PIIX, but in practice
nobody cares, so just leave it doing nothing.
Now it builds without actual Xen, move it to CONFIG_XEN_BUS to include it
in the KVM-only builds.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Such that PCI passthrough devices work for Xen emulated guests.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also be implemented
on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to
run the gauntlet of struct layout compatibility, errno mapping, and the
rest of that fui).
It will also cover the support for architecture-independent grant table
and event channel support which will be added in hw/i386/kvm/ (on the
basis that the non-KVM support is very theoretical and making it not use
KVM directly seems like gratuitous overengineering at this point).
The XEN_BUS option is for the xenfv platform support, which will now be
used both by XEN_EMU and by real Xen.
The XEN option remains dependent on the Xen runtime libraries, and covers
support for real Xen. Some code which currently resides under CONFIG_XEN
will be moving to CONFIG_XEN_BUS over time as the direct dependencies on
Xen runtime libraries are eliminated. The Xen PCI platform device will
also reside under CONFIG_XEN_BUS.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20210511041848.2743312-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-21-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-20-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-19-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The function is only used inside ide/pci.c, so doesn't need to be exported.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-18-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-17-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_get_geometry() and ide_get_bios_chs_trans() are only
used by the TYPE_PC_MACHINE.
"hw/ide.h" is a mixed bag of lost IDE declarations. In order
to remove this (almost) pointless header soon, move these
declarations to "hw/ide/internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230220091358.17038-18-philmd@linaro.org>
idebus_active_if() operates on a IDEBus; rename it as
ide_bus_active_if() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/idebus_active_if/ide_bus_active_if/g' \
$(git grep -l idebus_active_if)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_init2() initializes a IDEBus, and set its output IRQ.
To emphasize this, rename it as ide_bus_init_output_irq().
Mechanical change using:
$ sed -i -e 's/ide_init2/ide_bus_init_output_irq/g' \
$(git grep -l ide_init2)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-15-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_exec_cmd() operates on a IDEBus; rename it as
ide_bus_exec_cmd() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_exec_cmd/ide_bus_exec_cmd/g' \
$(git grep -wl ide_exec_cmd)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-14-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_register_restart_cb() operates on a IDEBus; rename it as
ide_bus_register_restart_cb() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_register_restart_cb/ide_bus_register_restart_cb/g' \
$(git grep -l ide_register_restart_cb)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-13-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_create_drive() operates on a IDEBus; rename it as
ide_bus_create_drive() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_create_drive/ide_bus_create_drive/g' \
$(git grep -wl ide_create_drive)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-12-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
ide_set_irq() operates on a IDEBus; rename it as
ide_bus_set_irq() to emphasize its first argument
is a IDEBus.
Mechanical change using:
$ sed -i -e 's/ide_set_irq/ide_bus_set_irq/g' \
$(git grep -l ide_set_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-11-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Only include "hw/irq.h" where appropriate.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-10-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Only atapi.c requires the SCSI constants. No need to include
it in all files including "hw/ide/internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215112712.23110-7-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The intermediate ISAIDEState::irq variable just add noise, remove it.
Message-Id: <20230215112712.23110-6-philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
"hw/ide.h" is a mixed bag of lost IDE declarations.
Extract isa_ide_init() and the TYPE_ISA_IDE QOM declarations
to a new "hw/ide/isa.h" header.
Rename ISAIDEState::isairq as 'irqnum' to emphasize this is
not a qemu_irq object but the number (index) of an ISA IRQ.
Message-Id: <20230215112712.23110-5-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
"hw/ide.h" is a mixed bag of lost IDE declarations.
Extract mmio_ide_init_drives() and the TYPE_MMIO_IDE QOM
declarations to a new "hw/ide/mmio.h" header.
Document the SysBus interface.
Message-Id: <20230215112712.23110-4-philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Following docs/devel/style.rst guidelines, rename MMIOIDEState
as IdeMmioState.
Having the structure name and its typedef named equally,
we can manually convert from the old DECLARE_INSTANCE_CHECKER()
macro to the more recent OBJECT_DECLARE_SIMPLE_TYPE().
Note, due to that name mismatch, this macro wasn't automatically
converted during commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE
when possible").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230220091358.17038-3-philmd@linaro.org>
Fixes: e4baa9f00b ("AHCI: Replace DPRINTF with trace-events")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230217103130.42077-1-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MAL properties are declared as uint8_t:
static Property ppc4xx_mal_properties[] = {
DEFINE_PROP_UINT8("txc-num", Ppc4xxMalState, txcnum, 0),
DEFINE_PROP_UINT8("rxc-num", Ppc4xxMalState, rxcnum, 0),
DEFINE_PROP_END_OF_LIST(),
};
Correct the API use by setting the property using
qdev_prop_set_uint8(). No behavioral change.
Fixes: da116a8aab ("ppc/ppc405: QOM'ify MAL")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230203145536.17585-7-philmd@linaro.org>
Pixman may return false if it does not have a suitable implementation.
Add fallbacks to handle such cases.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reported-by: Rene Engel <ReneEngel80@emailn.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <20ed9442a0146238254ccc340c0d1efa226c6356.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add simple implementation for two raster operations that are used by
AmigaOS which fixes graphics problems in some programs using these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reported-by: Rene Engel <ReneEngel80@emailn.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <17ef3c59dc7868f75034e9ebe21e2999c8f718d4.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
No need to use an intermediate 'dma-offset' property in the
chipset object. Alias the property, so when the machine (here
r2d-plus) sets the value on the chipset, it is propagated to
the OHCI object.
Note we can rename the chipset 'base' property as 'dma-offset'
since the object is a non-user-creatable sysbus type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230203145536.17585-12-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-8-philmd@linaro.org>
NEC_XHCI is a QOM object type. Declare its macros /
typedefs using OBJECT_DECLARE_SIMPLE_TYPE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-7-philmd@linaro.org>
By using the QOM UHCI_GET_CLASS() cast macro we don't to
use the intermediate PCIDeviceClass variable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-6-philmd@linaro.org>
The automatic conversion done during commit a489d1951c
("Use OBJECT_DECLARE_TYPE when possible") missed this
model because the typedefs are in a different file unit
(hcd-uhci.c) than where the DECLARE_INSTANCE_CHECKER()
is (hcd-uhci.h). Manually convert to OBJECT_DECLARE_TYPE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-5-philmd@linaro.org>
To help debugging add trace points that print values read from or
written to the device's registers.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <1bb4985e5dfc1df5a290e77f76fd827ae3592ab7.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ohci_port_set_if_connected() function is only used by
ohci_port_set_status(), move next to it to have them at the same place.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <46411d4980ab0fba61ab0d2209a939fdc41eb573.1676916640.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Forward-define the type first, then use it for the ohci_die() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-3-philmd@linaro.org>
Avoid when including "hw/usb/hcd-ohci.h":
hw/usb/hcd-ohci.h💯5: error: unknown type name 'SysBusDevice'
SysBusDevice parent_obj;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230203113650.78146-6-philmd@linaro.org>
hw/usb/u2f.h was added by commit 80e267f1d1 ("hw/usb: Add
U2F key base class"), almost the same time of the automatic
conversion done by commit c821774a3b ("Use OBJECT_DECLARE_TYPE
where posible"). Manually convert to OBJECT_DECLARE_TYPE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-9-philmd@linaro.org>
To avoid forward-declaring CCIDBus, declare CCID_BUS QOM
definitions before its use in the USBCCIDState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220150515.32549-2-philmd@linaro.org>
These can be shared with other AC97 implementations.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <6f0980fdc3753624be6f3935a6ab0a2dc1df4b30.1677445307.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-4-philmd@linaro.org>
To avoid forward-declaring ES1370State, declare ES1370 QOM
definitions before its use in the chan_bits structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-3-philmd@linaro.org>
To avoid forward-declaring HDAAudioState, declare HDA_AUDIO QOM
definitions before its use in the HDAAudioStream structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230220131837.26292-2-philmd@linaro.org>
Avoid when refactoring unrelated headers:
hw/timer/hpet.c:776:39: error: array has incomplete element type 'Property' (aka 'struct Property')
static Property hpet_device_properties[] = {
^
hw/timer/hpet.c:777:5: error: implicit declaration of function 'DEFINE_PROP_UINT8' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
DEFINE_PROP_UINT8("timers", HPETState, num_timers, HPET_MIN_TIMERS),
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230215174353.37097-2-philmd@linaro.org>
rtc_get_memory() and rtc_set_memory() helpers only work with
TYPE_MC146818_RTC devices. 'memory' in their name refer to
the CMOS region. Rename them as mc146818rtc_get_cmos_data()
and mc146818rtc_set_cmos_data() to be explicit about what
they are doing.
Mechanical change doing:
$ sed -i -e 's/rtc_set_memory/mc146818rtc_set_cmos_data/g' \
$(git grep -wl rtc_set_memory)
$ sed -i -e 's/rtc_get_memory/mc146818rtc_get_cmos_data/g' \
$(git grep -wl rtc_get_memory)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-4-philmd@linaro.org>
rtc_get_memory() and rtc_set_memory() methods can not take any
TYPE_ISA_DEVICE object. They expect a TYPE_MC146818_RTC one.
Simplify the API by passing a MC146818RtcState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-3-philmd@linaro.org>
RTCState only represents a Motorola MC146818 model,
not any RTC chipset. Rename the structure as MC146818RtcState
using:
$ sed -i -e s/RTCState/MC146818RtcState/g $(git grep -wl RTCState)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-4-philmd@linaro.org>
isa_get_irq() was added in commit 3a38d437ca
("Add isa_reserve_irq()" Fri Aug 14 11:36:15 2009) as:
a temporary interface to be used to allocate ISA IRQs for
devices which have not yet been converted to qdev, and for
special cases which are not suited for qdev conversions,
such as the 'ferr'.
We still use it 14 years later, using the global 'isabus'
singleton. In order to get rid of such *temporary* interface,
extract isa_bus_get_irq() which can take any ISABus* object.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-3-philmd@linaro.org>
isa_get_dma() returns a DMA channel handler from an ISABus.
To emphasize this, rename it as isa_bus_get_dma().
Mechanical change using:
$ sed -i -e 's/isa_get_dma/isa_bus_get_dma/g' \
$(git grep -l isa_get_dma)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230215161641.32663-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230210163744.32182-11-philmd@linaro.org>
isa_bus_irqs() register an array of input IRQs on
the ISA bus. Rename it as isa_bus_register_input_irqs().
Mechanical change using:
$ sed -i -e 's/isa_bus_irqs/isa_bus_register_input_irqs/g' \
$(git grep -wl isa_bus_irqs)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-10-philmd@linaro.org>
No point in inlining isa_bus_from_device() which is only
used at device realization time.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230210163744.32182-9-philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
ISADeviceClass is an empty class and just increase code
complexity. Remove it, directly embedding DeviceClass in
classes expanding TYPE_ISA_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230215161641.32663-19-philmd@linaro.org>
Keep reference to ISA input IRQs in EbusState.
To emphasize input/output distinction, rename arrays
as isa_irqs_in / isa_irqs_out.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-7-philmd@linaro.org>
Directly dispatch ISA IRQs to 'cpu_intr' output IRQ
by removing the intermediate via_isa_request_i8259_irq()
handler. Rename ISA IRQs array as 'isa_irqs_in' to
emphasize these are input IRQs.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When the i82378 model was added in commit a04ff94097 ("prep:
Add i82378 PCI-to-ISA bridge emulation") the i8259 model was
not yet QOM'ified. This happened later in commit 747c70af78
("i8259: Convert to qdev").
Directly dispatch ISA IRQs to 'cpu_intr' output IRQ
by removing the intermediate i82378_request_out0_irq()
handler. Rename ISA IRQs array as 'isa_irqs_in' to
emphasize these are input IRQs.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit a04ff94097 ("prep: Add i82378 PCI-to-ISA bridge
emulation") aimed to model the 2 output IRQs: CPU intr
and NMI. Commit 5039d6e235 ("i8257: remove cpu_request_exit
irq") removed the NMI IRQ.
Since this model only use the CPU interrupt, replace the
'out[2]' array by a single 'cpu_intr'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-3-philmd@linaro.org>
i8259_init() helper creates a i8259 device on an ISA bus,
connects its IRQ output to the parent's input IRQ, and
returns an array of 16 ISA input IRQs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-2-philmd@linaro.org>
ICH9 is a south bridge which doesn't necessarily depend on x86, so move
it into the southbridge folder, analoguous to PIIX.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-13-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ioapic sources reside in hw/intc already. Move the headers there
as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-11-shentey@gmail.com>
[PMD: Keep ioapic_internal.h in hw/intc/, not under include/]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Most code uses IOAPIC_NUM_PINS. The only place where GSI_NUM_PINS defines
the size of an array is ICH9LPCState::gsi which needs to match
IOAPIC_NUM_PINS. Remove GSI_NUM_PINS for consistency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ich9_lpc_reset() is the dc->reset callback which is called
automatically. No need to call it explicitly during k->realize.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Make TYPE_ICH9_LPC_DEVICE more self-contained by moving the call to
ich9_lpc_pm_init() from board code to its realize function. In order
to propagate x86_machine_is_smm_enabled(), introduce an "smm-enabled"
property like we have in piix4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a preparation to make the next patch cleaner.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ich9_smb_init() is a legacy init function, so modernize the code.
Note that the smb_io_base parameter was unused.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a preparation for the next commit to make it cleaner.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
By using qdev_get_child_bus() we can eliminate ICH9LPCState::isa_bus and
spare the ich9_lpc variable in pc_q35, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
No need to rely on the board to wire up the ICH9 PCI IRQs. All functions
access private state of the LPC device which suggests that it should
wire up the IRQs.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This function is not used anywhere outside this file, so
we can delete the prototype from include/hw/i386/x86.h and
make the function "static void".
This fixes when building with -Wall and using Clang
("Apple clang version 14.0.0 (clang-1400.0.29.202)"):
../hw/i386/x86.c:70:24: error: static function 'MACHINE' is used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
MachineState *ms = MACHINE(x86ms);
^
include/hw/i386/x86.h:101:1: note: use 'static' to give inline function 'init_topo_info' internal linkage
void init_topo_info(X86CPUTopoInfo *topo_info, const X86MachineState *x86ms);
^
static
include/hw/boards.h:24:49: note: 'MACHINE' declared here
OBJECT_DECLARE_TYPE(MachineState, MachineClass, MACHINE)
^
Reported-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220158.6317-6-philmd@linaro.org>
The structure is accessed read-only by qdev_get_parent_bus().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230212224730.51438-2-philmd@linaro.org>
Local variable "name" is allocated through strdup_printf and should be
freed with g_free() to avoid memory leak.
Fixes: 3616f424 ("nubus-device: add romfile property for loading declaration ROMs")
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221222172915.671597-1-mcascell@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState
declaration for free. Besides, the QOM code style is to use
the structure name as typedef, and QEMU style is to use Camel
Case, so rename qemu_or_irq as OrIRQState.
Mechanical change using:
$ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM *DECLARE* macros expect a typedef as first argument,
not a structure. Replace 'struct IRQState' by 'IRQState'
to avoid when modifying the macros:
../hw/core/irq.c:29:1: error: declaration of anonymous struct must be a definition
DECLARE_INSTANCE_CHECKER(struct IRQState, IRQ,
^
Use OBJECT_DECLARE_SIMPLE_TYPE instead of DECLARE_INSTANCE_CHECKER.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20230113200138.52869-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cmsdk_apb_uart_create() is only used twice in the same
file. Open-code it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230220115114.25237-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Open-code the single use of xilinx_uartlite_create().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pl011_luminary_create() is only used for the Stellaris board,
open-code it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pl011_create() is only used in DeviceRealize handlers,
not a hot-path. Inlining is not justified.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since &I2C_SLAVE(dev)->qdev == dev, no need to go back and
forth with QOM type casting. Directly use 'dev'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation to moving the hflags code into its own file
under the tcg/ directory.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pci_device.h is not needed at all in allwinner-a10.h, and serial.h
is only needed by the corresponding .c file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230215152233.210024-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
-----BEGIN PGP SIGNATURE-----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=wDFZ
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu into staging
* Simplify device casting in w/vfio/ccw.c
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmP8lVURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWYkg//RTKsG0+HGMtnKvjTA5NzLIJrWAQfSPfh
# ABkxNHoscReae8LGquFfeTy9cN/uA051e/P06WfPXAkg3Uj72JKHHs/ncm5VhApY
# 7moOCIHlvFRAsy5TKYoInM+Yo0jov7vgKqqJcS3AL3hwhmvEwPwKr0cpZLNfKV8p
# GD+XM453g0AFn2jDFoXDsnHX3zco+7sd4dQN4olSrkd/gDel2UQ5JE4gJ/o6Qgys
# GW4vb+NpxQ6W3mSlU+ClTr03ZljPkascBS7tZO8Fwn+J3Wv4UTNLlM1JFXQhC3v8
# x9HpVpk4HW6C/hiPcsMpZRlXBb/HklkAhDxZ6tjTnQLRvbJ/o2uISJt+ZgeH9zeQ
# Ae4Ap7yPxsuGbx2twzbGoyEPAJj18hW7EUd6KromFqy877svmyRYs3NXQqSJOEmh
# Pv7VriUe6esyyVSXWjA6g2imo5pIhWxxRlsNVrrp8vOJNYT+ygBIFqu28ngwk86H
# jZOLqekEkQrNkwZZLuoxm8FyCAvzfMBeHQFlDnL4a3114dlC6X3/cJqCZ5htTaO+
# t7CL6QcepRh0NQPw1jRlUCARZK+WocjwwcmzgVzSKKzGpdg/EJC8Sg54l7wdVQCp
# jY3HEUWHHHmrqe3IefrzadRQhsB9xKcNdUaZmetRUm+ohgSc9S0cfpVXNwT+G3+M
# a47dp9ueI6Q=
# =wDFZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 11:34:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu: (33 commits)
Deprecate the "-no-acpi" command line switch
gitlab-ci.d/base: Mark jobs as interruptible by default
gitlab-ci.d: Build with --enable-fdt=system by default
gitlab-ci.d/buildtest-template: Simplify the configure step
gitlab-ci.d/buildtest: Disintegrate the build-coroutine-sigaltstack job
gitlab-ci.d/buildtest: Remove aarch64-softmmu from the build-system-ubuntu job
Updated the FSF address to <https://www.gnu.org/licenses/>
meson: fix dependency on qemu-keymap
qemu-keymap: Silence memory leak warning from Clang's sanitizer
configure: Add 'mkdir build' check
tests/tcg/s390x: Add sam.S
tests/tcg/s390x: Add bal.S
target/s390x: Use tcg_constant_* in translate_vx.c.inc
target/s390x: Use tcg_constant_i32 for fpinst_extract_m34
target/s390x: Use tcg_constant_* for DisasCompare
target/s390x: Use tcg_constant_* in local contexts
s390x/pv: Add support for asynchronous teardown for reboot
target/s390x: Hoist some computation in access_memmove
target/s390x: Inline do_access_{get,set}_byte
target/s390x: Remove TLB_NOTDIRTY workarounds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds support for the asynchronous teardown for reboot for
protected VMs.
When attempting to tear down a protected VM, try to use the new
asynchronous interface first. If that fails, fall back to the classic
synchronous one.
The asynchronous interface involves invoking the new
KVM_PV_ASYNC_DISABLE_PREPARE command for the KVM_S390_PV_COMMAND ioctl.
This will prepare the current protected VM for asynchronous teardown.
Once the protected VM is prepared for teardown, execution can continue
immediately.
Once the protected VM has been prepared, a new thread is started to
actually perform the teardown. The new thread uses the new
KVM_PV_ASYNC_DISABLE command for the KVM_S390_PV_COMMAND ioctl. The
previously prepared protected VM is torn down in the new thread.
Once KVM_PV_ASYNC_DISABLE is invoked, it is possible to use
KVM_PV_ASYNC_DISABLE_PREPARE again. If a protected VM has already been
prepared and its cleanup has not started, it will not be possible to
prepare a new VM. In that case the classic synchronous teardown has to
be performed.
The synchronous teardown will now also clean up any prepared VMs whose
asynchronous teardown has not been initiated yet.
This considerably speeds up the reboot of a protected VM; for large VMs
especially, it could take a long time to perform a reboot with the
traditional synchronous teardown, while with this patch it is almost
immediate.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230214163035.44104-3-imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the VFIO_CCW() QOM type-checking macro to avoid DO_UPCAST().
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213170145.45666-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM parenthood relationship is:
VFIOCCWDevice -> S390CCWDevice -> CcwDevice -> DeviceState
No need to double-cast, call CCW_DEVICE() on VFIOCCWDevice.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-6-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the S390_CCW_DEVICE() QOM type-checking macro to avoid DO_UPCAST().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213170145.45666-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'cdev' is VFIOCCWDevice's private parent object.
Access it using the S390_CCW_DEVICE() QOM macro.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM parenthood relationship is:
VFIOCCWDevice -> S390CCWDevice -> CcwDevice -> DeviceState
We can directly use the QOM DEVICE() macro to get the parent object.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
hw.h only contains the protoype of one function nowadays, hw_error(),
so all files that do not use this function anymore also do not need
to include this header anymore.
Message-Id: <20230216142915.304481-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* A triplet of cleanups to the kernel/initrd loader that avoids
duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
reviewers. Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
values (such as doubles) on 32-bit targets.
-----BEGIN PGP SIGNATURE-----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=Umli
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu into staging
Fourth RISC-V PR for QEMU 8.0, Attempt 2
* A triplet of cleanups to the kernel/initrd loader that avoids
duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
reviewers. Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
values (such as doubles) on 32-bit targets.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmP5Br8THHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYiT4RD/9hdSlQlR1g/2h4fbCJ3U0GvyNH0T7N
# mt3AX8hFvmfR1O63qqVVebJSHM1dTm6WsA19vKE5tdtbjV5V8UZuBTSqYeRBSrLd
# LK9IHhwv3k9OQ/EG8CgRo7HEMxAurpC26zTf3chnfwa1Wyl5XxCXNx5hPbhu18G9
# oxw0sBi51T0Tb+N6lOVVSfmiEZWLXRq+lDCZdV0j864brsSjo4x8VEGrLaFTOJLf
# X4MW6vBI4Pcb7EGnHjj5WvRKsf8gdahdx8bSTjORIm8oGri9Iyw6Vrg2khuhjnuH
# 99sD1O06cvrylp+sCOVei8H3S6/xCepQXUXnCBCd1/cetgV+olo+ZR78Z8ZjXPED
# jhZ23lsDcge+4W141lsCiwLgzI0YO3Ac+84zQLIvcx16c8zow3G9FO9sTlBSsgnW
# 0XJrsUF7AZB6quUSMytG7WK+OBizzCRwj7ItC+Mty68wLrei5lDVj8b0t8hAQEdr
# dOb7jku+Dz8OspGZx1aDKKifGDO+Ppv4PjAM2G44OmkM824SvvFg8+FEr9NgbKbp
# VgTZDCeVC6IEpzthKsK8WeompLo7Sc33KITqwMbGiyGs+gsnmgKP2bcTLF8YTlFk
# dqFBWjo3tjH5oukgTLCSYY4xPaHR9q418vGAfRox15GtUVliQ9iL5oH47PVXg4U7
# YsNZ74nD1pUueg==
# =Umli
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Feb 2023 18:49:35 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu:
target/riscv: Fix vslide1up.vf and vslide1down.vf
target/riscv: avoid env_archcpu() in cpu_get_tb_cpu_state()
target/riscv: Smepmp: Skip applying default rules when address matches
MAINTAINERS: Add some RISC-V reviewers
target/riscv: Remove privileged spec version restriction for RVV
hw/riscv/boot.c: make riscv_load_initrd() static
hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()
hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
