This pointer needs to be reset after overflow just like
code_buf and code_ptr.
Cc: qemu-stable@nongnu.org
Fixes: 57a269469d ("tcg: Infrastructure for managing constant pools")
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit a7cfd751fb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
s->offset and s->size are only set at the end of the function and still
contain the old values when formatting the error message. Print the
parameters with the new values that we actually checked instead.
Fixes: 500e243420 ('raw-format: Split raw_read_options()')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240829185527.47152-1-kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 04bbc3ee52)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In commit 52b10c9c0c in 2023 the QAPI MapEntry struct was
updated to add a 'compressed' field. That commit updated a number
of iotest expected-output files, but missed 211, which is vdi
specific. The result is that
./check -vdi
and more specifically
./check -vdi 211
fails because the expected and actual output don't match.
Update the reference output.
Cc: qemu-stable@nongnu.org
Fixes: 52b10c9c0c ("qemu-img: map: report compressed data blocks")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241008164708.2966400-4-peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d60bd080e7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 3c5f86a226.
Changing the order here caused a regression with the "tuxrun"
kernels (from https://storage.tuxboot.com/20230331/) - ATA commands
fail with a "ata1: lost interrupt (Status 0x58)" message.
Apparently we need to wire the interrupt here first before
realizing the device, so revert the change to the original
behavior.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-17-thuth@redhat.com>
(cherry picked from commit 68ad89b75a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Rather than waiting for the completion of migration on the source side,
wait for it on the destination QEMU side to avoid accessing the TPM TIS
memory mapped registers before QEMU could restore their state. This
error condition could be triggered on busy systems where the destination
QEMU did not have enough time to restore the TIS state while the test case
was already reading its registers. The test case was for example reading
the STS register and received an unexpected value (0xffffffff), which
lead to a segmentation fault later on due to trying to read 0xffff bytes
from the TIS into a buffer.
Cc: <qemu-stable@nongnu.org>
Reported-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
(cherry picked from commit d9280ea317)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zhiyi reported an infinite loop issue in VFIO use case. The cause of that
was a separate discussion, however during that I found a regression of
dirty sync slowness when profiling.
Each KVMMemoryListerner maintains an array of kvm memslots. Currently it's
statically allocated to be the max supported by the kernel. However after
Linux commit 4fc096a99e ("KVM: Raise the maximum number of user memslots"),
the max supported memslots reported now grows to some number large enough
so that it may not be wise to always statically allocate with the max
reported.
What's worse, QEMU kvm code still walks all the allocated memslots entries
to do any form of lookups. It can drastically slow down all memslot
operations because each of such loop can run over 32K times on the new
kernels.
Fix this issue by making the memslots to be allocated dynamically.
Here the initial size was set to 16 because it should cover the basic VM
usages, so that the hope is the majority VM use case may not even need to
grow at all (e.g. if one starts a VM with ./qemu-system-x86_64 by default
it'll consume 9 memslots), however not too large to waste memory.
There can also be even better way to address this, but so far this is the
simplest and should be already better even than before we grow the max
supported memslots. For example, in the case of above issue when VFIO was
attached on a 32GB system, there are only ~10 memslots used. So it could
be good enough as of now.
In the above VFIO context, measurement shows that the precopy dirty sync
shrinked from ~86ms to ~3ms after this patch applied. It should also apply
to any KVM enabled VM even without VFIO.
NOTE: we don't have a FIXES tag for this patch because there's no real
commit that regressed this in QEMU. Such behavior existed for a long time,
but only start to be a problem when the kernel reports very large
nr_slots_max value. However that's pretty common now (the kernel change
was merged in 2021) so we attached cc:stable because we'll want this change
to be backported to stable branches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240917163835.194664-2-peterx@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5504a81261)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in accel/kvm/trace-events)
32-bit TSTEQ and TSTNE is subject to the same constraints as
for 64-bit, but setcond_i32 and negsetcond_i32 were incorrectly
using TCG_CT_CONST ("i") instead of TCG_CT_CONST_CMP ("C").
Adjust the constraint and make tcg_target_const_match use the
same sequence as tgen_cmp2: first check if the constant is a
valid operand for TSTEQ/TSTNE, then accept everything for 32-bit
non-test comparisons, finally check if the constant is a valid
operand for 64-bit non-test comparisons.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 615586cb35)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Filtering pending messages when a new scanout is given shouldn't discard
pending cursor changes, for example.
Since filtering happens in a different thread, use atomic set/get.
Fixes: fa88b85dea ("ui/dbus: filter out pending messages when scanout")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-6-marcandre.lureau@redhat.com>
(cherry picked from commit cf59889781)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
(cherry picked from commit 330ef31deb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A filter function that wants to drop a message should return NULL, in
which case it must also unref the message itself.
Fixes: fa88b85de ("ui/dbus: filter out pending messages when scanout")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-4-marcandre.lureau@redhat.com>
(cherry picked from commit 244d52ff73)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3db74afec3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Returning a raw areg does not preserve the value if the areg
is subsequently modified. Fixes, e.g. "jsr (sp)", where the
return address is pushed before the branch.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2483
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240813000737.228470-1-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 352cc9f300)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In tcg_out_qemu_ldst_i128, we need a non-zero index register,
which we then use as a base register in several address modes.
Since we always have TCG_REG_TMP2 available, use that.
Cc: qemu-stable@nongnu.org
Fixes: 526cd4ec01 ("tcg/ppc: Support 128-bit load/store")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2597
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-By: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 3213da7b95)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the fallback when STDBRX is not available, avoid clobbering
TCG_REG_TMP1, which might be h.base, which is still in use.
Use TCG_REG_TMP2 instead.
Cc: qemu-stable@nongnu.org
Fixes: 01a112e2e9 ("tcg/ppc: Reorg tcg_out_tlb_read")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-By: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 4cabcb89b1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Comparing a string of 4 bytes only works in little-endian.
Adjust bulk bswap to only apply to the note payload.
Perform swapping of the note header manually; the magic
is defined so that it does not need a runtime swap.
Fixes: 83f990eb5a ("linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2596
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2884596f5f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
load_flt_binary() calls load_flat_file() -> page_set_flags().
page_set_flags() must be called with the mmap_lock held,
otherwise it aborts:
$ qemu-arm -L stm32/lib/ stm32/bin/busybox
qemu-arm: ../accel/tcg/user-exec.c:505: page_set_flags: Assertion `have_mmap_lock()' failed.
Aborted (core dumped)
Fix by taking the lock in load_flt_binary().
Fixes: fbd3c4cff6 ("linux-user/arm: Mark the commpage executable")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2525
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240822095045.72643-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit a9ee641bd4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit e99441a379 ("ui/curses: Do not use console_select()")
qemu_text_console_put_keysym() no longer checks for NULL console
argument, which leads to a later crash:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x00005555559ee186 in qemu_text_console_handle_keysym (s=0x0, keysym=31) at ../ui/console-vc.c:332
332 } else if (s->echo && (keysym == '\r' || keysym == '\n')) {
(gdb) bt
#0 0x00005555559ee186 in qemu_text_console_handle_keysym (s=0x0, keysym=31) at ../ui/console-vc.c:332
#1 0x00005555559e18e5 in qemu_text_console_put_keysym (s=<optimized out>, keysym=<optimized out>) at ../ui/console.c:303
#2 0x00005555559f2e88 in do_key_event (vs=vs@entry=0x5555579045c0, down=down@entry=1, keycode=keycode@entry=60, sym=sym@entry=65471) at ../ui/vnc.c:2034
#3 0x00005555559f845c in ext_key_event (vs=0x5555579045c0, down=1, sym=65471, keycode=<optimized out>) at ../ui/vnc.c:2070
#4 protocol_client_msg (vs=0x5555579045c0, data=<optimized out>, len=<optimized out>) at ../ui/vnc.c:2514
#5 0x00005555559f515c in vnc_client_read (vs=0x5555579045c0) at ../ui/vnc.c:1607
Fixes: e99441a379 ("ui/curses: Do not use console_select()")
Fixes: https://issues.redhat.com/browse/RHEL-50529
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 0e60fc8093)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mips64el cross setup is very broken for bullseye which has now
entered LTS support so is unlikely to be fixed. While we still can't
build the container with all packages for bookworm due to a single
missing dependency that will hopefully get fixed in due course. For
the sake of keeping the CI green we disable the problematic packages
via the lcitool's mappings.yml file.
See also: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1081535
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Disable the problematic packages via lcitool's mappings.yml]
Message-ID: <20241002080333.127172-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit c60473d292)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix in tests/docker/dockerfiles/debian-mips64el-cross.docker)
When we are building for OSS-Fuzz, we want to ensure that the fuzzer
targets are actually created, regardless of leaks. Leaks will be
detected by the subsequent tests of the individual fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240527150001.325565-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 3e964275d6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target_ulong is typedef'ed as a 32-bit integer when building the
qemu-system-arm target, and this is smaller than the size of an
intermediate physical address when LPAE is being used.
Given that Linux may place leaf level user page tables in high memory
when built for LPAE, the kernel will crash with an external abort as
soon as it enters user space when running with more than ~3 GiB of
system RAM.
So replace target_ulong with vaddr in places where it may carry an
address value that is not representable in 32 bits.
Fixes: f3639a64f6 ("target/arm: Use softmmu tlbs for page table walking")
Cc: qemu-stable@nongnu.org
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240927071051.1444768-1-ardb+git@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 67d762e716)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow overlapping request by removing the assert that made it
impossible. There are only two callers:
1. block_copy_task_create()
It already asserts the very same condition before calling
reqlist_init_req().
2. cbw_snapshot_read_lock()
There is no need to have read requests be non-overlapping in
copy-before-write when used for snapshot-access. In fact, there was no
protection against two callers of cbw_snapshot_read_lock() calling
reqlist_init_req() with overlapping ranges and this could lead to an
assertion failure [1].
In particular, with the reproducer script below [0], two
cbw_co_snapshot_block_status() callers could race, with the second
calling reqlist_init_req() before the first one finishes and removes
its conflicting request.
[0]:
> #!/bin/bash -e
> dd if=/dev/urandom of=/tmp/disk.raw bs=1M count=1024
> ./qemu-img create /tmp/fleecing.raw -f raw 1G
> (
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev raw,node-name=node0,file.driver=file,file.filename=/tmp/disk.raw \
> --blockdev raw,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.raw \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } }
> {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } }
> {"execute": "nbd-server-start", "arguments": {"addr": { "type": "unix", "data": { "path": "/tmp/nbd.socket" } } } }
> {"execute": "block-export-add", "arguments": {"id": "exp0", "node-name": "snap0", "type": "nbd", "name": "exp0"}}
> EOF
> ) &
> sleep 5
> while true; do
> ./qemu-nbd -d /dev/nbd0
> ./qemu-nbd -c /dev/nbd0 nbd:unix:/tmp/nbd.socket:exportname=exp0 -f raw -r
> nbdinfo --map 'nbd+unix:///exp0?socket=/tmp/nbd.socket'
> done
[1]:
> #5 0x000071e5f0088eb2 in __GI___assert_fail (...) at ./assert/assert.c:101
> #6 0x0000615285438017 in reqlist_init_req (...) at ../block/reqlist.c:23
> #7 0x00006152853e2d98 in cbw_snapshot_read_lock (...) at ../block/copy-before-write.c:237
> #8 0x00006152853e3068 in cbw_co_snapshot_block_status (...) at ../block/copy-before-write.c:304
> #9 0x00006152853f4d22 in bdrv_co_snapshot_block_status (...) at ../block/io.c:3726
> #10 0x000061528543a63e in snapshot_access_co_block_status (...) at ../block/snapshot-access.c:48
> #11 0x00006152853f1a0a in bdrv_co_do_block_status (...) at ../block/io.c:2474
> #12 0x00006152853f2016 in bdrv_co_common_block_status_above (...) at ../block/io.c:2652
> #13 0x00006152853f22cf in bdrv_co_block_status_above (...) at ../block/io.c:2732
> #14 0x00006152853d9a86 in blk_co_block_status_above (...) at ../block/block-backend.c:1473
> #15 0x000061528538da6c in blockstatus_to_extents (...) at ../nbd/server.c:2374
> #16 0x000061528538deb1 in nbd_co_send_block_status (...) at ../nbd/server.c:2481
> #17 0x000061528538f424 in nbd_handle_request (...) at ../nbd/server.c:2978
> #18 0x000061528538f906 in nbd_trip (...) at ../nbd/server.c:3121
> #19 0x00006152855a7caf in coroutine_trampoline (...) at ../util/coroutine-ucontext.c:175
Cc: qemu-stable@nongnu.org
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240712140716.517911-1-f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
(cherry picked from commit 6475155d51)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()") contained a typo
in the NIC alias which caused initialisation of the in-built dp83932 NIC to fail
when using the normal -nic user,model=dp83932 command line.
Fixes: e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2e4fdf5660)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The XT check for the lxvx/stxvx instructions is currently
inverted. This was introduced during the move to decodetree.
>From the ISA:
Chapter 7. Vector-Scalar Extension Facility
Load VSX Vector Indexed X-form
lxvx XT,RA,RB
if TX=0 & MSR.VSX=0 then VSX_Unavailable()
if TX=1 & MSR.VEC=0 then Vector_Unavailable()
...
Let XT be the value 32×TX + T.
The code currently does the opposite:
if (paired || a->rt >= 32) {
REQUIRE_VSX(ctx);
} else {
REQUIRE_VECTOR(ctx);
}
This was already fixed for lxv/stxv at commit "2cc0e449d1 (target/ppc:
Fix lxv/stxv MSR facility check)", but the indexed forms were missed.
Cc: qemu-stable@nongnu.org
Fixes: 70426b5bb7 ("target/ppc: moved stxvx and lxvx from legacy to decodtree")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20240911141651.6914-1-farosas@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 8bded2e73e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The loop in the 32-bit case of the vector compare operation
was incorrectly incrementing by 8 bytes per iteration instead
of 4 bytes. This caused the function to process only half of
the intended elements.
Cc: qemu-stable@nongnu.org
Fixes: 9622c697d1 (tcg: Add gvec compare with immediate and scalar operand)
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240904142739.854-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 9d8d5a5b90)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The Neoverse-V1 TRM is a bit confused about the layout of the
ID_AA64ISAR1_EL1 register, and so its table 3-6 has the wrong value
for this ID register. Trust instead section 3.2.74's list of which
fields are set.
This means that we stop incorrectly reporting FEAT_XS as present, and
now report the presence of FEAT_BF16.
Cc: qemu-stable@nongnu.org
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240917161337.3012188-1-peter.maydell@linaro.org
(cherry picked from commit 8676007eff)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The follow-up transactions may use the data in the attribution, so keep
the value of attribution from the function parameter just as
flatview_translate() above.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Cc: qemu-stable@nongnu.org
Fixes: f26404fbee ("Make address_space_map() take a MemTxAttrs argument")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240912070404.2993976-2-fea.wang@sifive.com
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit d8d5ca4004)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix due to lack of
v9.1.0-134-g637b0aa13956 "softmmu: Support concurrent bounce buffers"
v9.0.0-564-g69e78f1b3484 "system/physmem: Per-AddressSpace bounce buffering")
This fixes:
commit e28112d007
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Jun 8 17:40:16 2023 +0100
gitlab: stable staging branches publish containers in a separate tag
Due to a copy+paste mistake, that commit included "QEMU_JOB_SKIPPED"
in the final rule that was meant to be a 'catch all' for staging
branches.
As a result stable branches are still splattering dockers from the
primary development branch.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20240906140958.84755-1-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 8d5ab746b1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before 176e3783f2 (ui/sdl2: OpenGL window context)
SDL_CreateRenderer was called unconditionally setting
the swap interval to 0. Since SDL_CreateRenderer is now no
longer called when OpenGL is enabled, the swap interval is
no longer set explicitly and vsync handling depends on
the environment settings which may lead to a performance
regression with virgl as reported in
https://gitlab.com/qemu-project/qemu/-/issues/2565
Restore the old vsync handling by explicitly calling
SDL_GL_SetSwapInterval if OpenGL is enabled.
Fixes: 176e3783f2 (ui/sdl2: OpenGL window context)
Closes: https://gitlab.com/qemu-project/qemu/-/issues/2565
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <01020191e05ce6df-84da6386-62c2-4ce8-840e-ad216ac253dd-000000@eu-west-1.amazonses.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit ae23cd0017)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On GICv2 and later, level triggered interrupts are pending when either
the interrupt line is asserted or the interrupt was made pending by a
GICD_ISPENDRn write. Making a level triggered interrupt pending by
software persists until either the interrupt is acknowledged or cleared
by writing GICD_ICPENDRn. As long as the interrupt line is asserted,
the interrupt is pending in any case.
This logic is transparently implemented in gic_test_pending() for
GICv1 and GICv2. The function combines the "pending" irq_state flag
(used for edge triggered interrupts and software requests) and the
line status (tracked in the "level" field). However, we also
incorrectly set the pending flag on a guest write to GICD_ISENABLERn
if the line of a level triggered interrupt was asserted. This keeps
the interrupt pending even if the line is de-asserted after some
time.
This incorrect logic is a leftover of the initial 11MPCore GIC
implementation. That handles things slightly differently to the
architected GICv1 and GICv2. The 11MPCore TRM does not give a lot of
detail on the corner cases of its GIC's behaviour, and historically
we have not wanted to investigate exactly what it does in reality, so
QEMU's GIC model takes the approach of "retain our existing behaviour
for 11MPCore, and implement the architectural standard for later GIC
revisions".
On that basis, commit 8d999995e4 in 2013 is where we added the
"level-triggered interrupt with the line asserted" handling to
gic_test_pending(), and we deliberately kept the old behaviour of
gic_test_pending() for REV_11MPCORE. That commit should have added
the "only if 11MPCore" condition to the setting of the pending bit on
writes to GICD_ISENABLERn, but forgot it.
Add the missing "if REV_11MPCORE" condition, so that our behaviour
on GICv1 and GICv2 matches the GIC architecture requirements.
Cc: qemu-stable@nongnu.org
Fixes: 8d999995e4 ("arm_gic: Fix GIC pending behavior")
Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com>
Message-id: 20240911114826.3558302-1-jan.kloetzke@kernkonzept.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded comment a little and converted to coding-style form;
expanded commit message with the historical backstory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 110684c9a6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, the guest may write to the device configuration space,
whereas the virtio sound device specification in chapter 5.14.4
clearly states that the fields in the device configuration space
are driver-read-only.
Remove the set_config function from the virtio_snd class.
This also prevents a heap buffer overflow. See QEMU issue #2296.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2296
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240901130112.8242-1-vr_qemu@t-online.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7fc6611cad)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Whatever issues there were which stopped these being updates when the
rest were have now been resolved. However mips64el continues to be
broken so don't update it here.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-3-alex.bennee@linaro.org>
(cherry picked from commit 19d2111059)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As debian-11 transitions to LTS we are starting to have problems
building the image. While we could update to a later Debian building a
32 bit QEMU without modern floating point is niche host amongst the
few remaining 32 bit hosts we regularly build for. For now we still
have armhf-debian-cross-container which is currently built from the
more recent debian-12.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-2-alex.bennee@linaro.org>
(cherry picked from commit d0068b746a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: force-remove tests/docker/dockerfiles/debian-armel-cross.docker)
Fixes: Coverity CID 1546884
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 586ac2c67d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Both gnutls and gcrypt can be configured to exclude support for certain
algorithms via a runtime check against system crypto policies. Thus it
is not sufficient to have a compile time test for hash support in their
pbkdf implementations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit e6c09ea4f9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CPU time accounting in the kernel has been demonstrated to have a
sawtooth pattern[1][2]. This can cause the getrusage system call to
not be as accurate as we are expecting, which can cause this calculation
to stall.
The kernel discussions shows that this inaccuracy happens when CPU time
gets big enough, so this patch changes qcrypto_pbkdf2_count_iters to run
in a fresh thread to avoid this inaccuracy. It also adds a sanity check
to fail the process if CPU time is not accounted.
[1] https://lore.kernel.org/lkml/159231011694.16989.16351419333851309713.tip-bot2@tip-bot2/
[2] https://lore.kernel.org/lkml/20221226031010.4079885-1-maxing.lan@bytedance.com/t/#m1c7f2fdc0ea742776a70fd1aa2a2e414c437f534Resolves: #2398
Signed-off-by: Tiago Pasqualini <tiago.pasqualini@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit c72cab5ad9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As reported by Peter, we might be leaking memory when removing the
highest RAMBlock (in the weird ram_addr_t space), and adding a new one.
We will fail to realize that we already allocated bitmaps for more
dirty memory blocks, and effectively discard the pointers to them.
Fix it by getting rid of last_ram_page() and by remembering the number
of dirty memory blocks that have been allocated already.
While at it, let's use "unsigned int" for the number of blocks, which
should be sufficient until we reach ~32 exabytes.
Looks like this leak was introduced as we switched from using a single
bitmap_zero_extend() to allocating multiple bitmaps:
bitmap_zero_extend() relies on g_renew() which should have taken care of
this.
Resolves: https://lkml.kernel.org/r/CAFEAcA-k7a+VObGAfCFNygQNfCKL=AfX6A4kScq=VSSK0peqPg@mail.gmail.com
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 5b82b703b6 ("memory: RCU ram_list.dirty_memory[] for safe RAM hotplug")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240828090743.128647-1-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit b84f06c2be)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix due to lack of
v9.0.0-rc4-49-g15f7a80c49cb "RAMBlock: Add support of KVM private guest memfd")
In vmstate_tlbemb a cut-and-paste error meant we gave
this vmstate subsection the same "cpu/tlb6xx" name as
the vmstate_tlb6xx subsection. This breaks migration load
for any CPU using the TLB_EMB CPU type, because when we
see the "tlb6xx" name in the incoming data we try to
interpret it as a vmstate_tlb6xx subsection, which it
isn't the right format for:
$ qemu-system-ppc -drive
if=none,format=qcow2,file=/home/petmay01/test-images/virt/dummy.qcow2
-monitor stdio -M bamboo
QEMU 9.0.92 monitor - type 'help' for more information
(qemu) savevm foo
(qemu) loadvm foo
Missing section footer for cpu
Error: Error -22 while loading VM state
Correct the incorrect vmstate section name. Since migration
for these CPU types was completely broken before, we don't
need to care that this is a migration compatibility break.
This affects the PPC 405, 440, 460 and e200 CPU families.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2522
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Arman Nabiev <nabiev.arman13@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
(cherry picked from commit 203beb6f04)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
20.04 is dead (from QEMU's point of view), long live 22.04!
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240426153938.1707723-3-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 108d99742a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While adding hppa64 support, the psw_v variable got extended from 32 to 64
bits. So, when packaging the PSW-V bit from the psw_v variable for interrupt
processing, check bit 31 instead the 63th (sign) bit.
This fixes a hard to find Linux kernel boot issue where the loss of the PSW-V
bit due to an ITLB interruption in the middle of a series of ds/addc
instructions (from the divU milicode library) generated the wrong division
result and thus triggered a Linux kernel crash.
Link: https://lore.kernel.org/lkml/718b8afe-222f-4b3a-96d3-93af0e4ceff1@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 931adff314 ("target/hppa: Update cpu_hppa_get/put_psw for hppa64")
Cc: qemu-stable@nongnu.org # v8.2+
(cherry picked from commit ead5078cf1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in target/hppa/helper.c due to lack of
v9.0.0-688-gebc9401a4067 "target/hppa: Split PSW X and B into their own field")
Commit 9b6083465f ("virtio-snd: check for invalid param shift
operands") tries to prevent invalid parameters specified by the
guest. However, the code is not correct.
Change the code so that the parameters format and rate, which are
a bit numbers, are compared with the bit size of the data type.
Fixes: 9b6083465f ("virtio-snd: check for invalid param shift operands")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240802071805.7123-1-vr_qemu@t-online.de>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7d14471a12)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 1f881ea4a4.
That commit causes reverse_debugging.py test failures, and does
not seem to solve the root cause of the problem x86-64 still
hangs in record/replay tests.
The problem with short-cutting the iowait that was taken during
record phase is that related events will not get consumed at the
same points (e.g., reading the clock).
A hang with zero icount always seems to be a symptom of an earlier
problem that has caused the recording to become out of synch with
the execution and consumption of events by replay.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-6-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-14-alex.bennee@linaro.org>
(cherry picked from commit 94962ff00d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2524
In particular, if an image has a large bss, we can hit
EOF before reading all host_len bytes of the mapping.
Create a helper, mmap_pread to handle the job for both
the larger block in mmap_h_gt_g itself, as well as the
smaller block in mmap_frag.
Cc: qemu-stable@nongnu.org
Fixes: eb5027ac61 ("linux-user: Split out mmap_h_gt_g")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2504
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240820050848.165253-2-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit a4ad4a9d98)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In multifd_recv_setup() we allocate (among other things)
* a MultiFDRecvData struct to multifd_recv_state::data
* a MultiFDRecvData struct to each multfd_recv_state->params[i].data
(Then during execution we might swap these pointers around.)
But in multifd_recv_cleanup() we free multifd_recv_state->data
in multifd_recv_cleanup_state() but we don't ever free the
multifd_recv_state->params[i].data. This results in a memory
leak reported by LeakSanitizer:
(cd build/asan && \
ASAN_OPTIONS="fast_unwind_on_malloc=0:strip_path_prefix=/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../" \
QTEST_QEMU_BINARY=./qemu-system-x86_64 \
./tests/qtest/migration-test --tap -k -p /x86_64/migration/multifd/file/mapped-ram )
[...]
Direct leak of 72 byte(s) in 3 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9c83c in multifd_recv_setup migration/multifd.c:1606:19
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9bed9 in multifd_recv_setup migration/multifd.c:1588:32
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
SUMMARY: AddressSanitizer: 96 byte(s) leaked in 4 allocation(s).
Free the params[i].data too.
Cc: qemu-stable@nongnu.org
Fixes: d117ed0699 ("migration/multifd: Allow receiving pages without packets")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
(cherry picked from commit 4c107870e8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The crash was reported in MAC OS and NixOS, here is the link for this bug
https://gitlab.com/qemu-project/qemu/-/issues/2334https://gitlab.com/qemu-project/qemu/-/issues/2321
In this bug, they are using the virtio_input device. The guest notifier was
not supported for this device, The function virtio_pci_set_guest_notifiers()
was not called, and the vector_irqfd was not initialized.
So the fix is adding the check for vector_irqfd in virtio_pci_get_notifier()
The function virtio_pci_get_notifier() can be used in various devices.
It could also be called when VIRTIO_CONFIG_S_DRIVER_OK is not set. In this situation,
the vector_irqfd being NULL is acceptable. We can allow the device continue to boot
If the vector_irqfd still hasn't been initialized after VIRTIO_CONFIG_S_DRIVER_OK
is set, it means that the function set_guest_notifiers was not called before the
driver started. This indicates that the device is not using the notifier.
At this point, we will let the check fail.
This fix is verified in vyatta,MacOS,NixOS,fedora system.
The bt tree for this bug is:
Thread 6 "CPU 0/KVM" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7c817be006c0 (LWP 1269146)]
kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
817 if (irqfd->users == 0) {
(gdb) thread apply all bt
...
Thread 6 (Thread 0x7c817be006c0 (LWP 1269146) "CPU 0/KVM"):
0 kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
1 kvm_virtio_pci_vector_use_one () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:893
2 0x00005983657045e2 in memory_region_write_accessor () at ../qemu-9.0.0/system/memory.c:497
3 0x0000598365704ba6 in access_with_adjusted_size () at ../qemu-9.0.0/system/memory.c:573
4 0x0000598365705059 in memory_region_dispatch_write () at ../qemu-9.0.0/system/memory.c:1528
5 0x00005983659b8e1f in flatview_write_continue_step.isra.0 () at ../qemu-9.0.0/system/physmem.c:2713
6 0x000059836570ba7d in flatview_write_continue () at ../qemu-9.0.0/system/physmem.c:2743
7 flatview_write () at ../qemu-9.0.0/system/physmem.c:2774
8 0x000059836570bb76 in address_space_write () at ../qemu-9.0.0/system/physmem.c:2894
9 0x0000598365763afe in address_space_rw () at ../qemu-9.0.0/system/physmem.c:2904
10 kvm_cpu_exec () at ../qemu-9.0.0/accel/kvm/kvm-all.c:2917
11 0x000059836576656e in kvm_vcpu_thread_fn () at ../qemu-9.0.0/accel/kvm/kvm-accel-ops.c:50
12 0x0000598365926ca8 in qemu_thread_start () at ../qemu-9.0.0/util/qemu-thread-posix.c:541
13 0x00007c8185bcd1cf in ??? () at /usr/lib/libc.so.6
14 0x00007c8185c4e504 in clone () at /usr/lib/libc.so.6
Fixes: 2ce6cff94d ("virtio-pci: fix use of a released vector")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240806093715.65105-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a8e63ff289)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Yutaro Shimizu from the Cyber Defense Institute discovered a bug in the
NVMe emulation that leaks contents of an uninitialized heap buffer if
subsystem and FDP emulation are enabled.
Cc: qemu-stable@nongnu.org
Reported-by: Yutaro Shimizu <shimizu@cyberdefense.jp>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 6a22121c4f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the creds->username property is set we allocate memory
for it in qcrypto_tls_creds_psk_prop_set_username(), but
we never free this when the QCryptoTLSCredsPSK is destroyed.
Free the memory in finalize.
This fixes a LeakSanitizer complaint in migration-test:
$ (cd build/asan; ASAN_OPTIONS="fast_unwind_on_malloc=0" QTEST_QEMU_BINARY=./qemu-system-x86_64 ./tests/qtest/migration-test --tap -k -p /x86_64/migration/precopy/unix/tls/psk)
=================================================================
==3867512==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x5624e5c99dee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218edee) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
#1 0x7fb199ae9738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7fb199afe583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x5624e82ea919 in qcrypto_tls_creds_psk_prop_set_username /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../crypto/tlscredspsk.c:255:23
#4 0x5624e812c6b5 in property_set_str /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:2277:5
#5 0x5624e8125ce5 in object_property_set /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:1463:5
#6 0x5624e8136e7c in object_set_properties_from_qdict /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:55:14
#7 0x5624e81372d2 in user_creatable_add_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:112:5
#8 0x5624e8137964 in user_creatable_add_qapi /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:157:11
#9 0x5624e891ba3c in qmp_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/qom-qmp-cmds.c:227:5
#10 0x5624e8af9118 in qmp_marshal_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qapi/qapi-commands-qom.c:337:5
#11 0x5624e8bd1d49 in do_qmp_dispatch_bh /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qapi/qmp-dispatch.c:128:5
#12 0x5624e8cb2531 in aio_bh_call /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:171:5
#13 0x5624e8cb340c in aio_bh_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:218:13
#14 0x5624e8c0be98 in aio_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/aio-posix.c:423:5
#15 0x5624e8cba3ce in aio_ctx_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:360:5
#16 0x7fb199ae0d3a in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#17 0x7fb199ae0d3a in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#18 0x5624e8cbe1d9 in glib_pollfds_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:287:9
#19 0x5624e8cbcb13 in os_host_main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:310:5
#20 0x5624e8cbc6dc in main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:589:11
#21 0x5624e6f3f917 in qemu_main_loop /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/runstate.c:801:9
#22 0x5624e893379c in qemu_default_main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:37:14
#23 0x5624e89337e7 in main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:48:12
#24 0x7fb197972d8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#25 0x7fb197972e3f in __libc_start_main csu/../csu/libc-start.c:392:3
#26 0x5624e5c16fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
SUMMARY: AddressSanitizer: 5 byte(s) leaked in 1 allocation(s).
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240819145021.38524-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 87e012f29f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
