By default mingw-gcc is trying to pack structures the way to
preserve binary compatibility with MS Visual C what leads to
incorrect and unexpected padding in the PCI bus ranges property of
the sPAPR PHB.
The patch replaces __attribute__((packed)) with more strict QEMU_PACKED
which actually is __attribute__((gcc_struct, packed)) on Windows.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that we have LPAE support and can handle passing 64 bit
RAM sizes to Linux via the device tree, we can lift the
restriction in the Versatile Express A15 daughterboard model
on not having more than 2GB of RAM. Allow up to 30GB, which
is the maximum that can fit in the address map before running
into the (unmodelled) aliases of the first 2GB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support the case where the device tree blob specifies that
#address-cells and #size-cells are greater than 1. (This
is needed for device trees which can handle 64 bit physical
addresses and thus total RAM sizes over 4GB.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
The legacy ATAGS format for passing information to the kernel only
allows RAM sizes which fit in 32 bits; enforce this restriction
rather than silently doing something weird.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Clean up the mix of getting the RAM size from the global ram_size
and from the ram_size field in the arm_boot_info structure, so
that we always use the structure field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Make the RAM size in arm_boot_info a uint64_t so it can express
the larger RAM sizes that may be seen in LPAE systems.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Add a missing guard that meant we would segfault if the guest read
UARTDR on a PL011 serial device which had no chr backend connected.
(This didn't happen for Linux guests because Linux reads the flags
register and doesn't try to read the UART if it's empty.)
Reported-by: Christian Müller <christian.mueller@heig-vd.ch>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added (msi|msix)_set_message() function for whoever might
want to use them.
Currently msi_notify()/msix_notify() write to these vectors to
signal the guest about an interrupt so the correct values have to
written there by the guest or QEMU.
For example, POWER guest never initializes MSI/MSIX vectors, instead
it uses RTAS hypercalls. So in order to support MSIX for virtio-pci on
POWER we have to initialize MSI/MSIX message from QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This per-device notifier shall be triggered by any interrupt router
along the path of a device's legacy interrupt signal on routing changes.
For simplicity reasons and as this is a slow path anyway, no further
details on the routing changes are provided. Instead, the callback is
expected to use pci_device_route_intx_to_irq to check the effect of the
change.
Will be used by KVM PCI device assignment and VFIO.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device assigned on KVM needs to know the mode
(enabled/inverted/disabled) and the IRQ number that a given device
triggers in the attached interrupt controller.
Add a PCI IRQ path discovery function that walks from a given device to
the host bridge, and gets this information. For
this purpose, a host bridge callback function is introduced:
route_intx_to_irq. It is so far only implemented by the PIIX3, other
host bridges can be added later on as required.
Will be used for KVM PCI device assignment and VFIO.
Based on patch by Jan Kiszka, with minor tweaks.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* kwolf/for-anthony: (41 commits)
fdc-test: Clean up a bit
fdc-test: introduce test_relative_seek
fdc: fix relative seek
qemu-iotests: Valgrind support
coroutine-ucontext: Help valgrind understand coroutines
qemu-io: Fix memory leaks
hw/block-common: Factor out fall back to legacy -drive cyls=...
blockdev: Don't limit DriveInfo serial to 20 characters
hw/block-common: Factor out fall back to legacy -drive serial=...
hw/block-common: Move BlockConf & friends from block.h
Relax IDE CHS limits from 16383,16,63 to 65535,16,255
blockdev: Drop redundant CHS validation for if=ide
hd-geometry: Compute BIOS CHS translation in one place
qtest: Test we don't put hard disk info into CMOS for a CD-ROM
ide pc: Put hard disk info into CMOS only for hard disks
block: Geometry and translation hints are now useless, purge them
qtest: Cover qdev property for BIOS CHS translation
ide: qdev property for BIOS CHS translation
qdev: New property type chs-translation
qdev: Collect private helpers in one place
...
* qemu-kvm/uq/master:
virtio: move common irqfd handling out of virtio-pci
virtio: move common ioeventfd handling out of virtio-pci
event_notifier: add event_notifier_set_handler
memory: pass EventNotifier, not eventfd
ivshmem: wrap ivshmem_del_eventfd loops with transaction
ivshmem: use EventNotifier and memory API
event_notifier: add event_notifier_init_fd
event_notifier: remove event_notifier_test
event_notifier: add event_notifier_set
apic: Defer interrupt updates to VCPU thread
apic: Reevaluate pending interrupts on LVT_LINT0 changes
apic: Resolve potential endless loop around apic_update_irq
kvm: expose tsc deadline timer feature to guest
kvm_pv_eoi: add flag support
kvm: Don't abort on kvm_irqchip_add_msi_route()
qdev_prop_set_string uses object_property_set_str, which takes
a const char * for the value. Lets propagate the constness
into qdev_prop_set_string.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All current users (IDE, SCSI and virtio-blk) happen to share this 20
characters limit. Still, it should be left to device models. They
already enforce their limits. They have to, as the DriveInfo limit
only affects legacy -drive serial=..., not the qdev properties.
usb-storage, which doesn't limit serial number length, also uses
DriveInfo for -usbdevice. But that doesn't provide access to
DriveInfo serial.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This stuff doesn't belong to block layer, and was put there only
because a better home didn't exist then. Now it does.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New limits straight from ATA4 6.2 Register delivered data transfer
command sector addressing.
I figure the old sector limit 63 was blindly copied from the BIOS
int 13 limit. Doesn't apply to the hardware. No idea where the old
cylinder limit comes from.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, it is split between hd_geometry_guess() and
pc_cmos_init_late(). Confusing. info qtree shows the result of the
former. Also confusing.
Fold the part done in pc_cmos_init_late() into hd_geometry_guess().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In particular, don't set disk type and geometry when a CD-ROM on bus
ide.0 has media during CMOS initialization.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().
The only consumer of the hint is hd_geometry_guess().
The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints. Therefore, drive_init()'s hints are never used.
Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call. Only the first call computes something, subsequent calls
just repeat the first call's results. However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug. Thus, dropping the repeat feature
doesn't break anything now.
If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong. Thus,
dropping the repeat feature prevents future breakage.
This renders the hints unused. Purge them from the block layer.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This isn't quite orthodox. CHS translation is firmware configuration,
communicated via the RTC's CMOS RAM, not a property of the disk. But
it's best to treat it just like geometry anyway.
Maintain backward compatibility exactly like for geometry: fall back
to DriveInfo's translation, set with -drive trans=...
Bonus: info qtree now shows the translation. Except when it shows
"auto": that's resolved by pc_cmos_init_late(). To be addressed
shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just code motion, with one long line wrapped to keep checkpatch.pl
happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Do this only for ide-hd. ide-drive is legacy. ide-cd doesn't have a
geometry.
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Do this only for scsi-hd. scsi-disk is legacy. scsi-cd doesn't have
a geometry. scsi-block should get geometry from the host disk.
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Best to use the same type, to avoid unwanted truncation or sign
extension.
BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
PC BIOS setup needs IDE geometry information. Get it directly from
the device model rather than through the block layer. In preparation
of purging geometry from the block layer, which will happen later in
this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hd_geometry_guess() picks geometry and translation. Callers can get
the geometry directly, via parameters, but for translation they need
to go through the block layer.
Add a parameter for translation, so it can optionally be gotten just
like geometry. In preparation of purging translation from the block
layer, which will happen later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When hd_geometry_guess() picks a geometry, it also picks the
appropriate translation, but only when the prior translation hint is
BIOS_ATA_TRANSLATION_AUTO. Looks wrong, because such a prior
translation would be passed to the BIOS whether it's suitable for the
geometry or not.
Fortunately, that can't happen. There are just two ways for the
translation hint to get set to something other than
BIOS_ATA_TRANSLATION_AUTO: drive_init() on behalf of -drive trans=...,
and hd_geometry_guess(). Both set it only when they also set a valid
geometry hint, i.e. one with a non-zero number of cylinders.
Since hd_geometry_guess() returns right away when it finds a valid
geometry hint, translation can only be BIOS_ATA_TRANSLATION_AUTO in
the remainder of the function.
Assert this, and simplify accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5bbdbb46 moved it to block.c because "other geometry guessing
functions already reside in block.c". Device-specific functionality
should be kept in device code, not the block layer. Move it back.
Disk geometry guessing is still in block.c. To be moved out in a
later patch series.
Bonus: the floppy type used in pc_cmos_init() now obviously matches
the one in the FDrive. Before, we relied on
bdrv_get_floppy_geometry_hint() picking the same type both in
fd_revalidate() and in pc_cmos_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let the text cursor blink at 1.875 Hz, the original VGA cursor
frequency. No timer is used, instead we rely on the fact that the
display is updated periodically.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Switch a format string from %x to TARGET_PRIxPHYS so that it will
continue to work even if target_phys_addr_t is changed
to 64 bits in the future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new TARGET_PRIxPHYS macro to avoid the need to define an
OMAP_FMT_plx macro whose expansion depends directly on
TARGET_PHYS_ADDR_BITS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The same mechanism is already in place for some select commands.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Suggested by blue swirl. Patch is on top of Paolo's
scsi-next tree.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Move down the expire time calculation down in the frame timer, to the
point where the timer is actually reloaded. This way we'll notice any
async_stepdown changes (especially resetting to 0 due to usb activity).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the async schedule being kicked from other places than the frame
timer (commit 0f588df8b3) it may happen
that we call ehci_commit_interrupt() more than once per frame.
Move the call from the async schedule handler to the frame timer to
restore old irq behavior, which is more correct. Fixes regressions
with some linux kernel versions.
TODO: implement full Interrupt Threshold Control support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
$subject says all: when loading old (v1) vmstate which doesn't contain
expire_time initialize it with a reasonable default (current time).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
$subject says all. First cut.
It's a pure UAS (usb attached scsi) emulation, without BOT (bulk-only
transport) compatibility. If your guest can't handle it use usb-storage
instead.
The emulation works like any other scsi hba emulation (eps, lsi, virtio,
megasas, ...). It provides just the HBA where you can attach scsi
devices as you like using '-device'. A single scsi target with up to
256 luns is supported.
For now only usb 2.0 transport is supported. This will change in the
future though as I plan to use this as playground when codeing up &
testing usb 3.0 transport and streams support in the qemu usb core and
the xhci emulation.
No migration support yet. I'm planning to add usb 3.0 support first as
this probably requires saving additional state.
Special thanks go to Paolo for bringing the qemu scsi emulation into
shape, so this can be added nicely without having to touch a single line
of scsi code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All transports can use the same event handler for the irqfd, though the
exact mechanics of the assignment will be specific. Note that there
are three states: handled by the kernel, handled in userspace, disabled.
This also lets virtio use event_notifier_set_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
All transports can use the same event handler for the ioeventfd, though
the exact setup (address/memory region) will be specific.
This lets virtio use event_notifier_set_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Under Win32, EventNotifiers will not have event_notifier_get_fd, so we
cannot call it in common code such as hw/virtio-pci.c. Pass a pointer to
the notifier, and only retrieve the file descriptor in kvm-specific code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
All of ivshmem's usage of eventfd now has a corresponding API in
EventNotifier. Simplify the code by using it, and also use the
memory API consistently to set up and tear down the ioeventfds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a missing cast to avoid gcc complaining about format string
errors when printing an expression based on a target_phys_addr_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Most device models have a simple lifecycle for the hba_private field
and they can free it when a request is completed or cancelled.
However, in some cases it may be simpler to tie the lifetime
of hba_private to that of the included SCSIRequest. This patch
adds a free_request callback to SCSIBusInfo that lets an HBA
device model do exactly that.
Normally, device models use req->hba_private == NULL to flag requests
that have been completed already. Device models that use free_request
will still need to track this using a flag. This is the reason why
"converting" existing HBAs to use free_request adds complexity and
makes little sense. It is simply an additional convenience that is
provided by the SCSI layer. USB-attached storage will be the first
user.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
KVM performs TPR raising asynchronously to QEMU, specifically outside
QEMU's global lock. When an interrupt is injected into the APIC and TPR
is checked to decide if this can be delivered, a stale TPR value may be
used, causing spurious interrupts in the end.
Fix this by deferring apic_update_irq to the context of the target VCPU.
We introduce a new interrupt flag for this, CPU_INTERRUPT_POLL. When it
is set, the VCPU calls apic_poll_irq before checking for further pending
interrupts. To avoid special-casing KVM, we also implement this logic
for TCG mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When the guest modifies the LVT_LINT0 register, we need to check if some
pending PIC interrupt can now be delivered.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit d96e173769 refactored the reinjection of pending PIC interrupts.
However, it missed the potential loop of apic_update_irq ->
apic_deliver_pic_intr -> apic_local_deliver -> apic_set_irq ->
apic_update_irq that /could/ occur if LINT0 is injected as APIC_DM_FIXED
and that vector is currently blocked via TPR.
Resolve this by reinjecting only where it matters: inside
apic_get_interrupt. This function may clear a vector while a
PIC-originated reason still exists.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kwolf/for-anthony: (24 commits)
block: Factor bdrv_read_unthrottled() out of guess_disk_lchs()
qtest: Tidy up temporary files properly
fdc: Drop broken code for user-defined floppy geometry
fdc_test: introduce test_sense_interrupt
fdc_test: update media_change test
fdc: fix interrupt handling
fdc: rewrite seek and DSKCHG bit handling
block: introduce bdrv_swap, implement bdrv_append on top of it
block: copy over job and dirty bitmap fields in bdrv_append
raw: hook into blkdebug
blkdebug: optionally tie errors to a specific sector
blkdebug: store list of active rules
blkdebug: pass getlength to underlying file
blkdebug: tiny cleanup
blkdebug: remove sync i/o events
sheepdog: traverse pending_list from the first for each time
sheepdog: split outstanding list into inflight and pending
sheepdog: make sure we don't free aiocb before sending all requests
sheepdog: use coroutine based socket functions in coroutine context
sheepdog: restart I/O when socket becomes ready in do_co_req()
...
* kraxel/usb.55:
usb-host: add trace events for iso xfers
usb: fix interface initialization
usb: split endpoint init and reset
usb-redir: Correctly handle the usb_redir_babble usbredir status
ehci: Kick async schedule on wakeup in the non companion case
usb-ehci: Fix an assert whenever isoc transfers are used
ehci: don't flush cache on doorbell rings.
ehci: fix td writeback
ehci: fix ehci_qh_do_overlay
* bonzini/scsi-next:
scsi: Fix transfer length for READ POSITION commands.
scsi: Add basic support for SCSI media changer commands.
scsi: Ensure command and transfer lengths are set for all SCSI devices
scsi: Fix LOAD_UNLOAD
scsi: Fix data length == SCSI_SENSE_BUF_SIZE
virtio-scsi: do not crash on adding buffers to the event queue
megasas: LSI Megaraid SAS HBA emulation
megasas: Add header file
ISCSI: force use of sg for SMC and SSC devices
ISCSI: Add SCSI passthrough via scsi-generic to libiscsi
scsi-disk: implement READ DISC INFORMATION
atapi: implement READ DISC INFORMATION
scsi: add a qdev property for the disk's WWN
scsi: simplify handling of the VPD page length field
bdrv_get_floppy_geometry_hint() fails to store through its parameter
drive when bs has a geometry hint. Makes fd_revalidate() assign
random crap to drv->drive.
Has been broken that way for ages. Harmless, because:
* The only way to set a geometry hint is -drive if=none,cyls=...
Since commit c219331e, probably unintentional.
* The only use of drv->drive is as argument to another
bdrv_get_floppy_geometry_hint(). Which doesn't use it, since the
geometry hint is still there.
Drop the broken code, ignore -drive parameter cyls, heads and secs for
floppies even with if=none, just like before commit c219331e. Matches
-help, which explains cyls, heads, secs as "hard disk physical
geometry".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If you call the SENSE INTERRUPT STATUS command while there is no interrupt
waiting you get as result unknown command.
Fixed status0 register handling for read/write/format commands.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This bit is cleared on every successful seek to a different track (cylinder).
The seek is also called on revalidate or on read/write/format commands which
also clear the DSKCHG bit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace iso transfer fprintf's with trace points. Also rename existing
tracepoints so they all match usb_host_iso_*.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create a new usb_ep_reset() function to reset endpoint state, without
re-initialiting the queues, so we don't unlink in-flight packets just
because usb-host has to re-parse the descriptor tables.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 0f588df8b3, added code
to ehci_wakeup to kick the async schedule on wakeup, but the else
was positioned wrong making it trigger for devices which are routed
to the companion rather then to the ehci controller itself.
This patch fixes this. Note that the "programming style" with using the
return at the end of the companion block matches how the companion case
is handled in the other ports ops, and is done this way for consistency.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
hcd-ehci.c is missing an usb_packet_init() call for the ipacket UsbPacket
it uses for isoc transfers, triggering an assert (taking the entire vm down)
in usb_packet_setup as soon as any isoc transfers are done by a high speed
USB device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 4be23939ab makes ehci instantly
zap any unlinked queue heads when the guest rings the doorbell.
While hacking up uas support this turned out to be a problem. The linux
kernel can unlink and instantly relink the very same queue head, thereby
killing any async packets in flight. That alone isn't an issue yet, the
packet will canceled and resubmitted and everything is fine. We'll run
into trouble though in case the async packet is completed already, so we
can't cancel it any more. The transaction is simply lost then.
usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f0c2 qtds 29dbce40,29dbc4e0,00000009
usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2
usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: alloc
usb_packet_state_change bus 0, port 2, ep 1, packet 0x7f95fdec32e0, state undef -> setup
usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: process
usb_uas_command dev 2, tag 0x2, lun 0, lun64 00000000-00000000
scsi_req_parsed target 0 lun 0 tag 2 command 42 dir 2 length 16384
scsi_req_parsed_lba target 0 lun 0 tag 2 command 42 lba 5933312
scsi_req_alloc target 0 lun 0 tag 2
scsi_req_continue target 0 lun 0 tag 2
scsi_req_data target 0 lun 0 tag 2 len 16384
usb_uas_scsi_data dev 2, tag 0x2, bytes 16384
usb_uas_write_ready dev 2, tag 0x2
usb_packet_state_change bus 0, port 2, ep 1, packet 0x7f95fdec32e0, state setup -> complete
usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: free
usb_ehci_qh_ptrs q 0x7f95fdec3210 - QH @ 39c4f0c0: next 39c4f002 qtds 29dbce40,00000001,00000009
usb_ehci_qh_fields QH @ 39c4f0c0 - rl 4, mplen 512, eps 2, ep 2, dev 2
usb_ehci_queue_action q 0x7f95fe5152a0: free
usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state async -> complete
^^^ async packets completes.
usb_ehci_packet_action q 0x7f95fdec3210 p 0x7f95feba9130: wakeup
usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f002 qtds 29dbc4e0,29dbc8a0,00000009
usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2
usb_ehci_queue_action q 0x7f95fdec3210: free
usb_ehci_packet_action q 0x7f95fdec3210 p 0x7f95feba9130: free
^^^ endpoint #2 queue head removed from schedule, doorbell makes ehci zap the queue,
the (completed) usb packet is freed too and gets lost.
usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f0c2 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f0c2 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_queue_action q 0x7f9600dff570: alloc
usb_ehci_qh_ptrs q 0x7f9600dff570 - QH @ 39c4f0c0: next 39c4f122 qtds 29dbce40,00000001,00000009
usb_ehci_qh_fields QH @ 39c4f0c0 - rl 4, mplen 512, eps 2, ep 2, dev 2
usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: alloc
usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state undef -> setup
usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: process
usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state setup -> async
usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: async
^^^ linux kernel relinked the queue head, ehci creates a new usb packet,
but we should have delivered the completed one instead.
usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f002 qtds 29dbc4e0,29dbc8a0,00000009
usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2
So instead of instantly zapping the queue we'll set a flag that the
queue needs revalidation in case we'll see it again in the schedule.
ehci then checks that the queue head fields addressing / describing the
endpoint and the qtd pointer match the cached content before reusing it.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Only write back the dwords the hc is supposed to update. Should not
make a difference in theory as the guest must not touch the td while
it is active to avoid races. But it is still more correct.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
BARs are registered in init functions from memory regions created
by the drivers. Exit functions destroy those memory regions.
By unregistering the io regions after exit(), we're calling
memory_region_del_subregion on freed memory. Don't do that. The
option rom comes along for the ride because it's more symmetric
to how it's created.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not a single driver has any possibility of failure on their
exit function, let's keep it that way.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make the state fields rx_desc_addr and tx_desc_addr uint32_t;
this matches the VMStateDescription, and also conforms to how
hardware works: the registers don't magically become larger
if the device is attached to a CPU with a larger physical
address size. It also fixes a compile failure if the
target_phys_addr_t type is changed to 64 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board built
around the Freescale i.MX31.
Signed-off-by: Philip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the Freescale i.MX31 advanced vectored interrupt controller, at least
to the extent it is used by Linux 3.x
Vectors are not implemented.
Signed-off-by: Philip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the timers on the Freescale i.MX31 SoC.
This is not a complete implementation, but gives enough for
Linux to boot and run. In particular external triggers, which are
not useful under QEMU, are not implemented.
Signed-off-by: Philip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For Linux to be able to work out how fast its clocks are going, so
that timer ticks come approximately at the right time, it needs to
be able to query the clock control module (CCM).
This is the start of a CCM implementation. It currently knows only about
the MCU, HSP and IPG clocks --- i.e., the ones used to feed the periodic
and general purpose timers.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the Freescale i.MX UART. This uart is used in a variety of
SoCs, including some by Motorola, as well as in the Freescale i.MX
series.
This patch gives only a `bare-bones' implementation, enough to run Linux
or OKL4, but that's about it.
Signed-off-by: Philip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to mirror whole IROM and should pass zero instead of
EXYNOS4210_IROM_BASE_ADDR (though it equals to zero too) since
memory_region_init_alias takes an offset within an original
region as an argument.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
START/STOP bit was not cleaned correctly.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After some long period of time Linux kernel hanged due to
ptimer_get_count may return 0 before timer interrupt occurs,
thus, causing FRC to jump back in time
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The transfer length depends on the specific service action
code, as defined in the SCSI stream commands spec section 7.7.
Up to now only the extended form was supported.
Signed-off-by: Christian Hoff <christian.hoff@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds basic support for SCSI media changer commands.
Not all commands are supported as of now, but enough to cover
basic functionality.
Signed-off-by: Christian Hoff <christian.hoff@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi-generic relies on those values to be correct, so it is important that
those values are initialized properly for all device types.
Reported-by: Christian Hoff <christian.hoff@de.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change operation code of LOAD_UNLOAD command to 0x1b as described in
section 7.3 of the SCSI Stream Commands spec.
Signed-off-by: Christian Hoff <christian.hoff@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the edge case where the sense data length is exactly the same
as SCSI_SENSE_BUF_SIZE.
This makes SCSI requests work that use all of the available 95 byte
sense data.
Signed-off-by: Christian Hoff <christian.hoff@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The event queue is not supported yet and the handler does not
have to do much anyway when buffers are added. However, the
handler is called unconditionally by the virtio layer, and this
results in a crash as soon as buffers are added to the event
queue because we pass NULL.
Reported-by: Bryan Venteicher <bryanv@daemoninthecloset.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
and QBus changes - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update iscsi to allow passthrough of SG_IO scsi commands when the iscsi
device is forced to be scsi-generic.
Implement both bdrv_ioctl() and bdrv_aio_ioctl() in the iscsi backend,
emulate the SG_IO ioctl and pass the SCSI commands across to the
iscsi target.
This allows end-to-end passthrough of SCSI all the way from the guest,
to qemu, via scsi-generic, then libiscsi all the way to the iscsi target.
To activate this you need to specify that the iscsi lun should be treated
as a scsi-generic device.
Example:
-device lsi -device scsi-generic,drive=MyISCSI \
-drive file=iscsi://10.1.1.125/iqn.ronnie.test/1,if=none,id=MyISCSI
Note, you can currently not boot a qemu guest from a scsi device.
Note,
This only works when the host is linux, since the emulation relies on
definitions of SG_IO from the scsi-generic implementation in the
linux kernel.
It should be fairly easy to re-implement some structures similar enough
for non-linux hosts to do the same style of passthrough via a fake
scsi generic layer and libiscsi if need be.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This command is not necessary for CD-ROM and DVD-ROM, but some versions of
udev trip on its absence.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This command is not necessary for CD-ROM and DVD-ROM, but some versions of
udev trip on its absence.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the pseries machine emulation does not support DMA for emulated
PCI devices, because the PAPR spec always requires a (guest visible,
paravirtualized) IOMMU which was not implemented. Now that we have
infrastructure for IOMMU emulation, we can correct this and allow PCI DMA
for pseries.
With the existing PAPR IOMMU code used for VIO devices, this is almost
trivial. We use a single DMAContext for each (virtual) PCI host bridge,
which is the usual configuration on real PAPR machines (which often have
_many_ PCI host bridges).
Cc: Alex Graf <agraf@suse.de>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds some hooks to let PCI devices and busses use the new IOMMU
infrastructure. When IOMMU support is enabled, each PCI device now
contains a DMAContext * which is used by the pci_dma_*() wrapper functions.
By default, the contexts are initialized to NULL, assuming no IOMMU.
However the platform or host bridge code which sets up the PCI bus can use
pci_setup_iommu() to set a function which will determine the correct
DMAContext for a given PCI device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices. This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.
This patch converts this code to make use of the new common IOMMU
infrastructure.
We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.
Cc: Alex Graf <agraf@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the basic infrastructure necessary to emulate an IOMMU
visible to the guest. The DMAContext structure is extended with
information and a callback describing the translation, and the various
DMA functions used by devices will now perform IOMMU translation using
this callback.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The USB UHCI and EHCI drivers were converted some time ago to use the
pci_dma_*() helper functions. However, this conversion was not complete
because in some places both these drivers do DMA via the usb_packet_map()
function in usb-libhw.c. That function directly used
cpu_physical_memory_map().
Now that the sglist code uses DMA wrappers properly, we can convert the
functions in usb-libhw.c, thus conpleting the conversion of UHCI and EHCI
to use the DMA wrappers.
Note that usb_packet_map() invokes dma_memory_map() with a NULL invalidate
callback function. When IOMMU support is added, this will mean that
usb_packet_map() and the corresponding usb_packet_unmap() must be called in
close proximity without dropping the qemu device lock - otherwise the guest
might invalidate IOMMU mappings while they are still in use by the device
code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The AHCI device can provide both PCI and SysBus AHCI device
emulations. For this reason, it wasn't previously converted to use
the pci_dma_*() helper functions. Now that we have universal DMA
helper functions, this converts AHCI to use them.
The DMAContext is obtained from pci_dma_context() in the PCI case and
set to NULL in the SysBus case (i.e. we assume for now that a SysBus
AHCI has no IOMMU translation).
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
dma-helpers.c contains a number of helper functions for doing
scatter/gather DMA, and various block device related DMA. Currently,
these directly access guest memory using cpu_physical_memory_*(),
assuming no IOMMU translation.
This patch updates this code to use the new universal DMA helper
functions. qemu_sglist_init() now takes a DMAContext * to describe
the DMA address space in which the scatter/gather will take place.
We minimally update the callers qemu_sglist_init() to pass NULL
(i.e. no translation, same as current behaviour). Some of those
callers should pass something else in some cases to allow proper IOMMU
translation in future, but that will be fixed in later patches.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The OHCI device emulation can provide both PCI and SysBus OHCI
implementations. Because of this, it was not previously converted to
use the PCI DMA helper functions.
This patch converts it to use the new universal DMA helper functions.
In the PCI case, it obtains its DMAContext from pci_dma_context(), in
the SysBus case, it uses NULL - i.e. assumes for now that there will
be no IOMMU translation for a SysBus OHCI.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not that long ago, every device implementation using DMA directly
accessed guest memory using cpu_physical_memory_*(). This meant that
adding support for a guest visible IOMMU would require changing every
one of these devices to go through IOMMU translation.
Shortly before qemu 1.0, I made a start on fixing this by providing
helper functions for PCI DMA. These are currently just stubs which
call the direct access functions, but mean that an IOMMU can be
implemented in one place, rather than for every PCI device.
Clearly, this doesn't help for non PCI devices, which could also be
IOMMU translated on some platforms. It is also problematic for the
devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we
cannot use the the pci_dma_*() functions, because they assume the
presence of a PCIDevice, but we don't want to have to check between
pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the
device code.
This patch makes the first step on addressing both these problems, by
introducing new (stub) dma helper functions which can be used for any
DMA capable device.
These dma functions take a DMAContext *, a new (currently empty)
variable describing the DMA address space in which the operation is to
take place. NULL indicates untranslated DMA directly into guest
physical address space. The intention is that in future non-NULL
values will given information about any necessary IOMMU translation.
DMA using devices must obtain a DMAContext (or, potentially, contexts)
from their bus or platform. For now this patch just converts the PCI
wrappers to be implemented in terms of the universal wrappers,
converting other drivers can take place over time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A while back, we introduced the dma_addr_t type, which is supposed to
be used for bus visible memory addresses. At present, this is an
alias for target_phys_addr_t, but this will change when we eventually
add support for guest visible IOMMUs.
There are some instances of target_phys_addr_t in the code now which
should really be dma_addr_t, but can't be trivially converted due to
missing features which this patch corrects.
* We add DMA_ADDR_BITS analagous to TARGET_PHYS_ADDR_BITS. This is
important where we need to make a compile-time (#if) based on the
size of dma_addr_t.
* We add a new helper macro to create device properties which take a
dma_addr_t, currently an alias to DEFINE_PROP_TADDR().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit ff71f2e8ca prevent the possible
crash during initialization of linux driver by checking the operating
mode.This seems too strict as:
- the real card could still work in mode other than normal
- some buggy driver who does not set correct opmode after eeprom
access
So, considering rx ring address were reset to zero (which could be
safely trated as an address not intened to DMA to), in order to
both letting old guest work and preventing the unexpected DMA to
guest, we can forbid packet receiving when rx ring address is zero.
Tested-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
From Markus:
Before:
$ qemu-system-x86_64 -display none -drive if=ide
qemu-system-x86_64: Device needs media, but drive is empty
qemu-system-x86_64: Initialization of device ide-hd failed
[Exit 1 ]
After:
$ qemu-system-x86_64 -display none -drive if=ide
qemu-system-x86_64: Device needs media, but drive is empty
Segmentation fault (core dumped)
[Exit 139 (SIGSEGV)]
This error always existed as qdev_init() frees the object. But QOM
goes a bit further and purposefully sets the class pointer to NULL to
help find use-after-free. It worked :-)
Cc: Andreas Faerber <afaerber@suse.de>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
tci: Support INDEX_op_bswap64_i64
target-i386: Use QEMU instead of Qemu
Makefile.hw: avoid overly large 'make clean' rm command
configure: Fix typo
arm_gic: Send dbg msgs to stderr not stdout
checkpatch: Add QEMU specific rule
qemu-config: Use QEMU instead of Qemu
libqtest: Fix socket_accept() to pass address_len
Makefile.user: Define CONFIG_USER_ONLY for libuser/
Makefile: Remove macro qapi-dir
Makefile: Remove BUILD_DIR from qapi-dir
Install 'bepo' keymap already included in Qemu source
* kraxel/usb.54:
uhci: fix uhci_async_cancel_all
usb-host: live migration support
usb-host: attach only to running guest
ehci: tracing improvements
usb: restore USBDevice->attached on vmload
ehci: add live migration support
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (72 commits)
PPC: BookE206: Bump MAS2 to 64bit
PPC: BookE: Support 32 and 64 bit wide MAS2
PPC: Extract SPR dump generation into its own function
PPC: Add e5500 CPU target
PPC: BookE: Make ivpr selectable by CPU type
PPC: BookE: Implement EPR SPR
PPC: Add support for MSR_CM
PPC: Add some booke SPR defines
uImage: increase the gzip load size
PPC: e500: allow users to set the /compatible property via -machine
dt: make setprop argument static
PPC: e500: Refactor serial dt generation
dt: Add global option to set phandle start offset
PPC: e500: Extend address/size of / to 64bit
PPC: e500: Define addresses as always 64bit
PPC: e500: Use new SOC dt format
PPC: e500: Use new MPIC dt format
Revert "dt: temporarily disable subtree creation failure check"
PPC: e500: enable manual loading of dtb blob
PPC: e500: dt: use target_phys_addr_t for ramsize
...
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
s390: stop target cpu on sigp initial reset
s390: make kvm_stat work on s390
kvm: Update kernel headers
s390x: fix s390 virtio aliases
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
arm_boot: Conditionalised DTB command line update
cadence_ttc: changed master clock frequency
cadence_gem: avoid stack-writing buffer-overrun
hw/a9mpcore: Fix compilation failure if physaddrs are 64 bit
hw/omap.h: Drop broken MEM_VERBOSE tracing
hw/armv7m_nvic: Make the NVIC a freestanding class
hw/arm_gic: Move CPU interface memory region setup into arm_gic_init
hw/arm_gic.c: Make NVIC interrupt numbering a runtime setting
hw/arm_gic: Make CPU target registers RAZ/WI on uniprocessor
hw/arm_gic: Add qdev property for GIC revision
hw/armv7m_nvic: Use MemoryRegions for NVIC specific registers
hw/arm_gic: Move NVIC specific reset to armv7m_nvic_reset
hw/arm_gic: Remove the special casing of NCPU for the NVIC
hw/arm_gic: Remove NVIC ifdefs from gic_state struct
arm_boot: Fix typos in comment
ARM: Exynos4210 IRQ: Introduce new IRQ gate functionality.
On the e500 series, accessing SPR_EPR magically turns into an access at
that CPU's IACK register on the MPIC. Implement that logic to get kernels
that make use of that feature work.
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent u-boot has different defines for its gzip extract buffer, but the
common ground seems to be 64MB. So let's bump it up to that, enabling me
to load my test image again ;).
Signed-off-by: Alexander Graf <agraf@suse.de>
Device trees usually have a node /compatible, which indicate which machine
type we're looking at. For quick prototyping, it can be very useful to change
the contents of that node via the command line.
Thus, introduce a new option to -machine called dt_compatible, which when
set changes the /compatible contents to its value.
Signed-off-by: Alexander Graf <agraf@suse.de>
When generating serial port device tree nodes, we duplicate quite a bit
of code, because there are 2 of them in the mpc8544ds board we emulate.
Shove the generating code into a function, so we duplicate less code.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to be able to support >= 4GB of RAM. To do so, we need to be able
to tell the guest OS how much RAM it has.
However, that information today is capped to 32bit. So let's extend the
offset and size fields to 64bit, so we can fit in big addresses and even
one day - if we wish to do so - map devices above 32bit.
Signed-off-by: Alexander Graf <agraf@suse.de>
Every time we use an address constant, it needs to potentially fit into
a 64bit physical address space. So let's define things accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to popular demand, let's clean up the soc node a bit and use
more recent dt notions.
Requested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to popular demand, we're updating the way we generate the MPIC
node and interrupt lines based on what the current state of art is.
Requested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to be able to override the automatically created device tree
by using the -dtb option. Implement this for the mpc8544ds machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
We're passing the ram size as uint32_t, capping it to 32 bits atm.
Change to target_phys_addr_t (uint64_t) to make sure we have all
the bits.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a nice 64bit helper to ease the device tree generation and
make the code more readable when creating 64bit 2-cell parameters.
Use it when generating the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we are dynamically creating the dtb, it's really useful to
be able to dump the created blob for debugging.
This patch implements a -machine dumpdtb=<file> option for e500 that
dumps the dtb exactly in the form the guest would get it to disk. It
can then be analyzed by dtc to get information about the guest
configuration.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that all of the device tree bits are generated during runtime, we
can get rid of the device tree blob and instead start from scratch with
an empty device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we're moving all of the device tree generation from an external
pre-execution generated blob to runtime generation using libfdt, we absolutely
must have libfdt around.
This requirement was there before already, as the only way to not require libfdt
with e500 was to not use -kernel, which was the only way to boot the mpc8544ds
machine. This patch only manifests said requirement in the build system.
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a qemu-specific hypervisor call to the pseries machine
which allows to do what amounts to memmove, memcpy and xor over
regions of physical memory such as the framebuffer.
This is the simplest way to get usable framebuffer speed from
SLOF since the framebuffer isn't mapped in the VRMA and so would
otherwise require an hcall per 8 bytes access.
The performance is still not great but usable, and can be improved
with a more complex implementation of the hcall itself if needed.
This also adds some documentation for the qemu-specific hypercalls
that we add to PAPR along with a new qemu,hypertas-functions property
that mirrors ibm,hypertas-functions and provides some discoverability
for the new calls.
Note: I chose note to advertise H_RTAS to the guest via that mechanism.
This is done on purpose, the guest uses the normal RTAS interfaces
provided by qemu (including SLOF) which internally calls H_RTAS.
We might in the future implement part (or even all) of RTAS inside the
guest like IBM's firmware does and replace H_RTAS with some finer grained
set of private hypercalls.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
We were incorrectly g_free'ing an object that isn't allocated
in one error path and failed to release it completely in another
This fixes qemu crashes with some cases of IO errors.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
The core tcg/kvm code for ppc64 now has at least the outline
capability to support pagesizes beyond the standard 4k and 16MB. The
CPUState is initialized with information advertising the available
pagesizes and their correct encodings, and under the right KVM setup
this will be populated with page sizes beyond the standard.
Obviously guests can't use the extra page sizes unless they know
they're present. For the pseries machine, at least, there is a
defined method for conveying exactly this information, the
"ibm-segment-page-sizes" property in the guest device tree.
This patch generates this property using the supported page size
information that's already in the CPUState.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
The initial TLB entry is supposed to help us run the guest -kernel payload.
This means the guest needs to be able to access its own memory, the initrd
memory and the device tree.
So far we only statically reserved a TLB entry from [0;256M[. This patch
fixes it to span from [0;dt_end[, allowing the guest payload to access
everything initially.
Reported-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Old size: 8 MB (traditional upstream qemu value).
New size: 16 MB (traditional qemu-kvm value).
Also adds compat properties so old machine types
keep the old default values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In preperation for supporting a larger framebuffer for multiple monitors
on a single card, add a property to qxl vgamem_size_mb, and corresponding
byte sized vgamem_size, and use instead of VGA_RAM_SIZE.
[ kraxel: simplify property handling, add sanity checks ]
[ kraxel: fix mode copying ]
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Zap the global VGA_RAM_SIZE #define, make the vga ram size configurable
for standard vga and vmware vga. cirrus and qxl are left with a fixed
size (and private VGA_RAM_SIZE #define) for now.
qxl needs some non-trivial adjustments in the mode list handling deal
with a runtime-configurable size, which calls for a separate qxl patch.
cirrus emulates cards which have 2 MB (isa) and 4 MB (pci), so I guess
it would make sense to use these sizes. That change would break
migration though, so I left it fixed at 8 MB size. Making it
configurabls is pretty pointless for cirrus as we have to match real
hardware.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vgabios will check whenever any given video mode will fit into the
given video memory before adding it to the list of available modes, so
there is no need to keep xmax * ymax * 32bpp lower than VGA_RAM_SIZE.
Lets raise the limits a bit. Should be good for a few years, display
sizes are not growing that fast.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
soft_reset is called from any of:
* QXL_IO_RESET
* vga io
* pci reset handler
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested with linux guest. Not sure how to check actual performance affect
of this. Checked with the previously send traceevent that the kvm ioctl
to start/stop dirty logging is being called.
(KVM_SET_USER_MEMORY_REGION).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Convert uses of FLOPPY_ERROR to either FLOPPY_DPRINTF
(for implemented cases) or to use LOG_UNIMP (unimplemented).
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A more complete history can be found here:
git://xenbits.xensource.com/qemu-xen-unstable.git
Signed-off-by: Jiang Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch move the msi definition from apic.c to apic-msidef.h. So it can be
used also by other .c files.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
A more complete history can be found here:
git://xenbits.xensource.com/qemu-xen-unstable.git
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: Guy Zana <guy@neocleus.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
A more complete history can be found here:
git://xenbits.xensource.com/qemu-xen-unstable.git
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: Guy Zana <guy@neocleus.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This new property will be used to specify a host pci device address.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The purpose is to have a more generic pci_for_each_device by passing an extra
argument to the function called on every device.
This patch will be used in a next patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We are using this in our quirk lookup provided by patch
titled: Introduce Xen PCI Passthrough, PCI config space helpers.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The timer was deadlocking when the interval was set too low. It would cause a
flood of timer events and the CPU would halt indefinately. This is a known issue
and theres a generic workaround in place in ptimer on ptimer_set_limit(),
however the Xilinx timer uses ptimer_set_count() instead of set_limit. Changed
the call to set_count() to an equivalent call of set_limit() instead, which
brings the workaround into play.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The Xilinx timer does not interact with the qemu_timer API, so dont include it.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
In the next release of Xen (4.2), xs.h became deprecated.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Because xs.h will be remove in future release of Xen, this patch removes the
extra includes of this headers.
Also, it removes the extra includes of xenctrl.h and xen/io/xenbus.h as there
already are in xen_common.h.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We update the QTAILQ in the loop, thus we must use the SAFE version
to make sure we don't touch the queue struct after freeing it.
https://bugzilla.novell.com/show_bug.cgi?id=766310
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU exposes its version to the guest's hardware and in some cases that is wrong
(e.g. Windows prints messages about driver updates when you switch
the QEMU version).
There is a new field now on the struct QEmuMachine, hw_version, which may
contain the version that the specific machine should report. If that field is
set, then that machine will report that version to the guest.
Signed-off-by: Crístian Viana <vianac@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds two things. First it allows QEMU to distinguish between
regular powerdown and S4 powerdown. Later separate QMP notification will
be added for S4 powerdown. Second it allows S3/S4 states to be disabled
from QEMU command line. Some guests known to be broken with regards to
power management, but allow to use it anyway. Using new properties
management will be able to disable S3/S4 for such guests.
Supported system state are passed to a firmware using new fw_cfg file.
The file contains 6 byte array. Each byte represents one system
state. If byte at offset X has its MSB set it means that system state
X is supported and to enter it guest should use the value from lowest 3
bits.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I think I understand enough of what's going on in these rules to ensure this is
right. But I could certainly use a second or third opinion...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The DTB command line should only be overwritten if the user provides a command
line with -append. Otherwise whatever command line was in the DTB should stay
unchanged.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the timer clock frequency to 133MHz which is correct. the old 2.5MHz
value was for the pre-silicon emulation platform.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use sizeof(rxbuf)-size (not sizeof(rxbuf-size)) as the number
of bytes to clear. The latter would always clear 4 or 8
bytes, possibly writing beyond the end of that stack buffer.
Alternatively, depending on the value of the "size" parameter,
it could fail to initialize the end of "rxbuf".
Spotted by coverity.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a cast to a logging printf to avoid a compilation failure
if target_phys_addr_t is a 64 bit type. (This is better than
using TARGET_FMT_plx because we really don't need a full
16 digit hex string to print the offset into a device.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove the MEM_VERBOSE tracing option from omap.h. This worked by
intercepting cpu_register_io_memory() calls; it has been broken
since cpu_register_io_memory() was removed in favour of the
MemoryRegion API.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rearrange the GIC and NVIC so both are straightforward
subclasses of a common class, rather than having the NVIC
source file textually include arm_gic.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove more NVIC ifdefs by moving the code to setup the CPU interface
memory regions into the GIC specific arm_gic_init() function rather
than the gic_init() function. Rename the latter to more closely
reflect what it's now actually doing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the minor tweaks to interrupt numbering used by the NVIC
a runtime setting rather than a compile time one, so we can
drop more NVIC ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GIC spec says that the CPU target registers should RAZ/WI
for uniprocessor implementations. Implement this, which also
conveniently lets us drop an NVIC ifdef.
Annoyingly, the 11MPCore's GIC is the odd one out, since
it always has these registers, even in uniprocessor configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GIC behaviour can be different between revision 1 and
2 of the architectural GIC specification; we also have
to handle the legacy 11MPCore GIC, which is different
again in some places. Introduce a qdev property so we
can behave appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the NVIC specific register areas using a set of
overlaid MemoryRegions in a container, rather than by having
the arm_gic read/write functions use special purpose callbacks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the NVIC specific bits of reset to the NVIC's own
reset function, rather than using ifdefs in the common
arm_gic reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the special casing of NCPU=1 for the NVIC. This slightly
increases the amount of memory used by its state structure,
but removes some ifdeffery and means we can safely move the
GIC state into a common subclass structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some NVIC ifdefs from the gic_state struct and its
state save/load functions. This means there are some fields
in it which are present for the NVIC but not used, but means
it always has the same layout and can be pulled out into a
common subclass.
Note that the addition of irq_target[] to the save/load
struct for the NVIC requires a vmstate version bump.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
mimicing -> mimicking
thei -> the
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New IRQ gate consists of n_in input qdev gpio lines and one
output sysbus IRQ line. The output IRQ level is formed as OR
between all gpio inputs.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* afaerber-or/qom-next-2: (22 commits)
qom: Push error reporting to object_property_find()
qdev: Remove qdev_prop_exists()
qbus: Initialize in standard way
qbus: Make child devices links
qdev: Connect busses with their parent devices
qdev: Convert busses to QEMU Object Model
qdev: Move SysBus initialization to sysbus.c
qdev: Use wrapper for qdev_get_path
qdev: Remove qdev_prop_set_defaults
qdev: Clean up global properties
qdev: Move bus properties to abstract superclasses
qdev: Move bus properties to a separate global
qdev: Push "type" property up to Object
arm_l2x0: Rename "type" property to "cache-type"
m48t59: Rename "type" property to "model"
qom: Assert that public types have a non-NULL parent field
qom: Drop type_register_static_alias() macro
qom: Make Object a type
qom: Add class_base_init
qom: Add object_child_foreach()
...
* qmp/queue/qmp:
build: install qmp-commands.txt
Add rate limiting of RTC_CHANGE, BALLOON_CHANGE & WATCHDOG events
Add event notification for guest balloon changes
Fix some more license versions (GPL2+ instead of GPL2)
monitor: Fix memory leak with readline completion
qmp: do not include monitor.h from qapi-types-core.h
qmp: include monitor.h when needed
kvm: add missing include files
* kwolf/for-anthony: (39 commits)
qemu-iotests: add 036 autoclear feature bit test
qemu-iotests: add qcow2.py set-feature-bit command
fdc-test: introduced qtest read_without_media
fdc: fix implied seek while there is no media in drive
qcow2: fix autoclear image header update
xen: Don't peek behind the BlockDriverState abstraction
xen: Don't change -drive if=xen device name during machine init
block: Replace bdrv_get_format() by bdrv_get_format_name()
qemu-img: document qed format on qemu-img man page
qemu-iotests: COW with many AIO requests on the same cluster
qemu-iotests: Some backing file COW tests
qcow2: Fix avail_sectors in cluster allocation code
qcow2: Simplify calculation for COW area at the end
qcow2: always operate caches in writeback mode
ide: support enable/disable write cache
block: always open drivers in writeback mode
block: add bdrv_set_enable_write_cache
block: copy enable_write_cache in bdrv_append
savevm: flush after saving vm state
block: flush in writethrough mode after writes
...
* mst/tags/for_anthony:
pci_bridge_dev: fix error path in pci_bridge_dev_initfn()
qdev: release parent properties on dc->init failure
msi: Use msi/msix_present more consistently
msi: Invoke msi/msix_write_config from PCI core
msi: Guard msi/msix_write_config with msi_present
msi: Invoke msi/msix_reset from PCI core
msi: Guard msi_reset with msi_present
ahci: Clean up reset functions
intel-hda: Fix reset of MSI function
ahci: Fix reset of MSI function
rtl8139: honor RxOverflow flag in can_receive method
shpc: unparent device before free
Some of the virtio devices have the same frontend name, but actually
implement different devices behind the scenes through aliases.
The indicator which device type to use is the architecture. On s390, we
want s390 virtio devices. On everything else, we want PCI devices.
Reflect this in the alias selection code. This way we fix commands like
-device virtio-blk on s390x which with this patch applied select the
correct virtio-blk-s390 device rather than virtio-blk-pci.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Avoids duplicated error_set().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Also drop error_set() in object_property_del().]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Can be replaced everywhere with object_property_find().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move code to an initfn and finalizer.
Replace do_qbus_create_inplace() with qbus_realize().
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make qbus children show up as link<> properties. There is no stable
addressing for qbus children so we use an unstable naming convention.
This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This makes SysBus part of the root hierarchy and all busses children of
their respective parent DeviceState.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is far less interesting than it sounds. We simply add an Object to each
BusState and then register the types appropriately. Most of the interesting
refactoring will follow in the next patches.
Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once. Fortunately, not a lot of code is affected.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: Andreas Färber <afaerber@suse.de>
TYPE_SYSTEM_BUS will be local to hw/sysbus.c, so move existing references
to main_system_bus and system_bus_info there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This makes it easier to remove it from BusInfo.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead, qdev_property_add_static can set the default.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that global properties do not depend on buses anymore, set
them directly in the device instance_init function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden. In QOM, instead, these abstract classes are
explicit so we can move bus properties there.
All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.
We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.
The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.
This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types. So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.
Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Simple code movement in order to simplify future refactoring.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that Object is a type, add an instance_init function and push
the "type" property from qdev to there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Resolves a name conflict with the qdev "type" property that is about to
be moved to Object.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
This resolves a name conflict with the qdev "type" property that is
about to move into Object.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Add braces missing in original code.]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Finally, complete the fully specified interface. msix_add_config()
gets folded into msix_init() because we now have quite a few parameters
to pass and rolling it in let's us error earlier, avoiding the ugly
unwind exit path. msix_mmio_setup() also gets rolled in, just because
it's redundant to rediscover offsets when we already have them for
such a tiny function.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These don't have to be contiguous. Size them to only what
they need and use separate MemoryRegions for the vector
table and PBA.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MSIX, like PCI, is little endian. Specifying native is wrong here,
but we need to check the rest of the file to determine if it's
as simple as flipping this macro.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
What's this doing so far from msix_mmio_ops?
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trivial conversion, failed to have an uninit before and after.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msi_init() takes over a BAR without really specifying or allowing
specification of how it does so. Instead, let's split it into
two interfaces, one fully specified, and one trivially easy. This
implements the latter. msix_init_exclusive_bar() takes over
allocating and filling a PCI BAR _exclusively_ for the use of MSIX.
When used, the matching msi_uninit_exclusive_bar() should be used
to tear it down.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msix.h calls the PCIDevice * parameter "dev" almost everywhere except
the msix_write_config declaration. Fix the inconsistency.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No user in sight for msix_bar_size.
bar_size for all users is aligned, let's simply
require this instead of trying to fix up invalid input.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After setting a balloon target value, applications have to
continually poll 'query-balloon' to determine whether the
guest has reacted to this request. The virtio-balloon backend
knows exactly when the guest has reacted though, and thus it
is possible to emit a JSON event to tell the mgmt application
whenever the guest balloon changes.
This introduces a new 'qemu_balloon_changed()' API which is
to be called by balloon driver backends, whenever they have
a change in balloon value. This takes the 'actual' balloon
value, as would be found in the BalloonInfo struct.
The qemu_balloon_change API emits a JSON monitor event which
looks like:
{"timestamp": {"seconds": 1337162462, "microseconds": 814521},
"event": "BALLOON_CHANGE", "data": {"actual": 944766976}}
* balloon.c, balloon.h: Introduce qemu_balloon_changed() for
emitting balloon change events on the monitor
* hw/virtio-balloon.c: Invoke qemu_balloon_changed() whenever
the guest changes the balloon actual value
* monitor.c, monitor.h: Define QEVENT_BALLOON_CHANGE
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The Windows uses 'READ' command at the start of an instalation
without checking the 'dir' register. We have to abort the transfer
with an abnormal termination if there is no media in the drive.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First offender is xen_config_dev_blk()'s use of disk->bdrv->filename.
Get the filename from disk->opts instead. Same result, except for
snapshots: there, we now get the filename specified by the user
instead of the name of the temporary image created by bdrv_open().
Should be an improvement.
Second offender is blk_init()'s use of blkdev->bs->drv->format_name.
Simply use the appropriate interface to get the format name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A "top" BlockDriverState has a non-empty device_name. If the user
doesn't specify one with -drive parameter id, the system supplies a
default name.
xen_config_dev_blk() changes this name, during machine initialization.
Naughty. Don't do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Enabling or disabling the write cache is done with the SET FEATURES
command. The command can be issued with sg_sat_set_features from
sg3-utils.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the appropriate interface instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
