All the places in armv7m_cpu_do_interrupt() which pend an
exception in the NVIC are doing so for synchronous
exceptions. We know that we will always take some
exception in this case, so we can just acknowledge it
immediately, rather than returning and then immediately
being called again because the NVIC has raised its outbound
IRQ line.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: tweaked commit message; added DEBUG to the set of
exceptions we handle immediately, since it is synchronous
when it results from the BKPT instruction]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Having armv7m_nvic_acknowledge_irq() return the new value of
env->v7m.exception and its one caller assign the return value
back to env->v7m.exception is pointless. Just make the return
type void instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The v7M exception architecture requires that if a synchronous
exception cannot be taken immediately (because it is disabled
or at too low a priority) then it should be escalated to
HardFault (and the HardFault exception is then taken).
Implement this escalation logic.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: extracted from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The M profile condition for when we can take a pending exception or
interrupt is not the same as that for A/R profile. The code
originally copied from the A/R profile version of the
cpu_exec_interrupt function only worked by chance for the
very simple case of exceptions being masked by PRIMASK.
Replace it with a call to a function in the NVIC code that
correctly compares the priority of the pending exception
against the current execution priority of the CPU.
[Michael Davidsaver's patchset had a patch to do something
similar but the implementation ended up being a rewrite.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The aarch64 crypto instructions for AES and SHA are missing the
check for if the FPU is enabled.
Signed-off-by: Nick Reilly <nreilly@blackberry.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that x86_64 has only _rt signal handlers. This implementation
attempts to share code with the x86_32 implementation.
CC: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Allan Wirth <awirth@akamai.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170226165345.8757-1-bobby.prani@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This keeps the same results on type=static expansion, but make
type=full expansion return every single QOM property on the CPU
object that have a different value from the "base' CPU model,
plus all the CPU feature flag properties.
Cc: Jiri Denemark <jdenemar@redhat.com>
Message-Id: <20170222190029.17243-4-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement query-cpu-model-expansion for target-i386.
This should meet all the requirements while being simple. In the
case of static expansion, it will use the new "base" CPU model,
and in the case of full expansion, it will keep the original CPU
model name+props, and append extra properties.
A future follow-up should improve the implementation of
type=full, so that it returns more detailed data, including every
writable QOM property in the CPU object.
Cc: libvir-list@redhat.com
Cc: Jiri Denemark <jdenemar@redhat.com>
Message-Id: <20170222190029.17243-3-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The query-cpu-model-expand QMP command needs at least one static
model, to allow the "static" expansion mode to be implemented.
Instead of defining static versions of every CPU model, define a
"base" CPU model that has absolutely no feature flag enabled.
Despite having no CPUID data set at all, "-cpu base" is even a
functional CPU:
* It can boot a Slackware Linux 1.01 image with a Linux 0.99.12
kernel[1].
* It is even possible to boot[2] a modern Fedora x86_64 guest by
manually enabling the following CPU features:
-cpu base,+lm,+msr,+pae,+fpu,+cx8,+cmov,+sse,+sse2,+fxsr
[1] http://www.qemu-advent-calendar.org/2014/#day-1
[2] This is what can be seen in the guest:
[root@localhost ~]# cat /proc/cpuinfo
processor : 0
vendor_id : unknown
cpu family : 0
model : 0
model name : 00/00
stepping : 0
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu msr pae cx8 cmov fxsr sse sse2 lm nopl
bugs :
bogomips : 5832.70
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
[root@localhost ~]# x86info -v -a
x86info v1.30. Dave Jones 2001-2011
Feedback to <davej@redhat.com>.
No TSC, MHz calculation cannot be performed.
Unknown vendor (0)
MP Table:
Family: 0 Model: 0 Stepping: 0
CPU Model (x86info's best guess):
eax in: 0x00000000, eax = 00000001 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000001, eax = 00000000 ebx = 00000800 ecx = 00000000 edx = 07008161
eax in: 0x80000000, eax = 80000001 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000001, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 20000000
Feature flags:
fpu Onboard FPU
msr Model-Specific Registers
pae Physical Address Extensions
cx8 CMPXCHG8 instruction
cmov CMOV instruction
fxsr FXSAVE and FXRSTOR instructions
sse SSE support
sse2 SSE2 support
Long NOPs supported: yes
Address sizes : 0 bits physical, 0 bits virtual
0MHz processor (estimate).
running at an estimated 0MHz
[root@localhost ~]#
Message-Id: <20170222190029.17243-2-ehabkost@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Host CPUID info is used by the "max" CPU model only in KVM mode.
Move the initialization of CPUID data for "max" from class_init
to instance_init, and don't set CPUClass::cpu_def for "max".
Message-Id: <20170222183919.11928-4-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of reporting host CPUID data on "max", use the qemu64 CPU
model as reference to initialize CPUID
vendor/family/model/stepping/model-id.
Message-Id: <20170222183919.11928-3-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename the existing "host" CPU model to "max, and set it to
kvm_enabled=false. The new "max" CPU model will be able to enable
all features supported by TCG out of the box, because its logic
is based on x86_cpu_get_supported_feature_word(), which already
works with TCG.
A new KVM-specific "host" class was added, that simply inherits
everything from "max" except the 'ordering' and 'description'
fields.
Message-Id: <20170222183919.11928-2-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPU runnability checks and CPU model expansion have slightly
different requirements. Document the steps involved in loading a
CPU model and realizing a CPU, so their requirements and purpose
are clearly defined.
This patch doesn't change any implementation. It just add
comments, rename the x86_cpu_load_features() function for clarity
(so it won't be confused with x86_cpu_load_def()), and move
x86_cpu_filter_features() closer to it.
Message-Id: <20170116211124.29245-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename the field and add a small comment to make its purpose
clearer.
Message-Id: <20170119210449.11991-4-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of using kvm_enabled to order the "-cpu help" list, use a
new "ordering" field for that.
Message-Id: <20170119210449.11991-3-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The class is now safe because the assert(kvm_enabled()) line was
removed by commit e435601058.
Message-Id: <20170119210449.11991-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- cleanups, fixes and improvements
- program check loop detection (useful with the corresponding kernel
patch)
- wire up virtio-crypto for ccw
- and finally support many virtqueues for virtio-ccw
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uM3N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170224' into staging
A selection of s390x patches:
- cleanups, fixes and improvements
- program check loop detection (useful with the corresponding kernel
patch)
- wire up virtio-crypto for ccw
- and finally support many virtqueues for virtio-ccw
# gpg: Signature made Fri 24 Feb 2017 09:19:19 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170224:
s390x/css: handle format-0 TIC CCW correctly
s390x/arch_dump: pass cpuid into notes sections
s390x/arch_dump: use proper note name and note size
virtio-ccw: support VIRTIO_QUEUE_MAX virtqueues
s390x: bump ADAPTER_ROUTES_MAX_GSI
virtio-ccw: check flic->adapter_routes_max_batch
s390x: add property adapter_routes_max_batch
virtio-ccw: Check the number of vqs in CCW_CMD_SET_IND
virtio-ccw: add virtio-crypto-ccw device
virtio-ccw: handle virtio 1 only devices
s390x/flic: fail migration on source already
s390x/kvm: detect some program check loops
s390x/s390-virtio: get rid of DPRINTF
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=o8eA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-util-2017-02-23' into staging
option cutils: Fix and clean up number conversions
# gpg: Signature made Thu 23 Feb 2017 19:41:17 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-util-2017-02-23: (24 commits)
option: Fix checking of sizes for overflow and trailing crap
util/cutils: Change qemu_strtosz*() from int64_t to uint64_t
util/cutils: Return qemu_strtosz*() error and value separately
util/cutils: Let qemu_strtosz*() optionally reject trailing crap
qemu-img: Wrap cvtnum() around qemu_strtosz()
test-cutils: Drop suffix from test_qemu_strtosz_simple()
test-cutils: Use qemu_strtosz() more often
util/cutils: Drop QEMU_STRTOSZ_DEFSUFFIX_* macros
util/cutils: New qemu_strtosz()
util/cutils: Rename qemu_strtosz() to qemu_strtosz_MiB()
util/cutils: New qemu_strtosz_metric()
test-cutils: Cover qemu_strtosz() around range limits
test-cutils: Cover qemu_strtosz() with trailing crap
test-cutils: Cover qemu_strtosz() invalid input
test-cutils: Add missing qemu_strtosz()... endptr checks
option: Fix to reject invalid and overflowing numbers
util/cutils: Clean up control flow around qemu_strtol() a bit
util/cutils: Clean up variable names around qemu_strtol()
util/cutils: Rename qemu_strtoll(), qemu_strtoull()
util/cutils: Rewrite documentation of qemu_strtol() & friends
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:
- The ARM translate.c/translate-64.c have been converted to
- use MTTCG safe atomic primitives
- emit the appropriate barrier ops
- The ARM machine has been updated to
- hold the BQL when modifying shared cross-vCPU state
- defer powerctl changes to async safe work
All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Previously flushes on other vCPUs would only get serviced when they
exited their TranslationBlocks. While this isn't overly problematic it
violates the semantics of TLB flush from the point of view of source
vCPU.
To solve this we call the cputlb *_all_cpus_synced() functions to do
the flushes which ensures all flushes are completed by the time the
vCPU next schedules its own work. As the TLB instructions are modelled
as CP writes the TB ends at this point meaning cpu->exit_request will
be checked before the next instruction is executed.
Deferring the work until the architectural sync point is a possible
future optimisation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The WFE and YIELD instructions are really only hints and in TCG's case
they were useful to move the scheduling on from one vCPU to the next. In
the parallel context (MTTCG) this just causes an unnecessary cpu_exit
and contention of the BQL.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
When switching a new vCPU on we want to complete a bunch of the setup
work before we start scheduling the vCPU thread. To do this cleanly we
defer vCPU setup to async work which will run the vCPUs execution
context as the thread is woken up. The scheduling of the work will kick
the vCPU awake.
This avoids potential races in MTTCG system emulation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.
For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:
tlb_flush_page_by_mmuidx(other_cs, pageaddr,
(1 << ARMMMUIdx_S1SE1) |
(1 << ARMMMUIdx_S1SE0));
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bsJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' into staging
ppc patch queue for 2017-02-22
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
# gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits)
hw/ppc/ppc405_uc.c: Avoid integer overflows
hw/ppc/spapr: Check for valid page size when hot plugging memory
target-ppc: fix Book-E TLB matching
hw/net/spapr_llan: 6 byte mac address device tree entry
machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag
machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks
spapr: reuse machine->possible_cpus instead of cores[]
change CPUArchId.cpu type to Object*
pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object
pc: calculate topology only once when possible_cpus is initialised
pc: move pcms->possible_cpus init out of pc_cpus_init()
machine: move possible_cpus to MachineState
hw/pci-host/prep: Do not use hw_error() in realize function
target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv
target/ppc/POWER9: Adapt LPCR handling for POWER9
target/ppc/POWER9: Add ISAv3.00 MMU definition
target/ppc: Fix LPCR DPFD mask define
target-ppc: Add xscvqpudz and xscvqpuwz instructions
target-ppc: Implement round to odd variants of quad FP instructions
softfloat: Add float128_to_uint32_round_to_zero()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
we need to pass the cpuid into the pid field of the notes
section, otherwise the notes for different CPUs all have 0:
e.g. objdump -h shows:
old:
5 .reg-s390-prefix/0 00000004 0000000000000000 0000000000000000
6 .reg-s390-prefix 00000004 0000000000000000 0000000000000000
21 .reg-s390-prefix/0 00000004 0000000000000000 0000000000000000
new:
5 .reg-s390-prefix/1 00000004 0000000000000000 0000000000000000
6 .reg-s390-prefix 00000004 0000000000000000 0000000000000000
21 .reg-s390-prefix/2 00000004 0000000000000000 0000000000000000
Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In binutils/libbfd (bfd/elf.c) it is enforced that all s390
specific ELF notes like e.g. NT_S390_PREFIX or NT_S390_CTRS
have "LINUX" specified as note name and that the namesz is
6. Otherwise the notes are ignored.
QEMU currently uses "CORE" for these notes. Up to now this has
not been a real problem because the dump analysis tool "crash"
does handle that. But it will break all programs that use libbfd
for processing ELF notes.
So fix this and use "LINUX" for all s390 specific notes to comply
with libbfd. Also set the correct namesz.
Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Sometimes (e.g. early boot) a guest is broken in such ways that it loops
100% delivering operation exceptions (illegal operation) but the pgm new
PSW is not set properly. This will result in code being read from
address zero, which usually contains another illegal op. Let's detect
this case and put the guest in crashed state. Instead of only detecting
this for address zero apply a heuristic that will work for any program
check new psw so that it will also reach the crashed state if you
provide some random elf file to the -kernel option.
We do not want guest problem state to be able to trigger a guest panic,
e.g. by faulting on an address that is the same as the program check
new PSW, so we check for the problem state bit being off.
With this we
a: get rid of CPU consumption of such broken guests
b: keep the program old PSW. This allows to find out the original illegal
operation - making debugging such early boot issues much easier than
with single stepping
This relies on the kernel using a similar heuristic and passing such
operation exceptions to user space.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This will permit its use in parse_option_size().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
This makes qemu_strtosz(), qemu_strtosz_mebi() and
qemu_strtosz_metric() similar to qemu_strtoi64(), except negative
values are rejected.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is
null and the conversion doesn't consume the string completely.
Matches how qemu_strtol() & friends work.
Only test_qemu_strtosz_simple() passes a null @endptr. No functional
change there, because its conversion consumes the string.
Simplify callers that use @endptr only to fail when it doesn't point
to '\0' to pass a null @endptr instead.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
To parse numbers with metric suffixes, we use
qemu_strtosz_suffix_unit(nptr, &eptr, QEMU_STRTOSZ_DEFSUFFIX_B, 1000)
Capture this in a new function for legibility:
qemu_strtosz_metric(nptr, &eptr)
Replace test_qemu_strtosz_suffix_unit() by test_qemu_strtosz_metric().
Rename qemu_strtosz_suffix_unit() to do_strtosz() and give it internal
linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-15-git-send-email-armbru@redhat.com>
Xtensa core may have a number of RAM and ROM areas configured. Record
their size and location from the core configuration overlay and
instantiate them as RAM regions in the SIM machine.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Changes:
* Add MIPS Boston board support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=sAzw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170222' into staging
MIPS patches 2017-02-22
Changes:
* Add MIPS Boston board support
# gpg: Signature made Wed 22 Feb 2017 00:08:00 GMT
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170222:
hw/mips: MIPS Boston board support
hw: xilinx-pcie: Add support for Xilinx AXI PCIe Controller
loader: Support Flattened Image Trees (FIT images)
dtc: Update requirement to v1.4.2
target-mips: Provide function to test if a CPU supports an ISA
hw/mips_gic: Update pin state on mask changes
hw/mips_gictimer: provide API for retrieving frequency
hw/mips_cmgcr: allow GCR base to be moved
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On POWER, the valid page sizes that the guest can use are bound
to the CPU and not to the memory region. QEMU already has some
fancy logic to find out the right maximum memory size to tell
it to the guest during boot (see getrampagesize() in the file
target/ppc/kvm.c for more information).
However, once we're booted and the guest is using huge pages
already, it is currently still possible to hot-plug memory regions
that does not support huge pages - which of course does not work
on POWER, since the guest thinks that it is possible to use huge
pages everywhere. The KVM_RUN ioctl will then abort with -EFAULT,
QEMU spills out a not very helpful error message together with
a register dump and the user is annoyed that the VM unexpectedly
died.
To avoid this situation, we should check the page size of hot-plugged
DIMMs to see whether it is possible to use it in the current VM.
If it does not fit, we can print out a better error message and
refuse to add it, so that the VM does not die unexpectely and the
user has a second chance to plug a DIMM with a matching memory
backend instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1419466
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix a build error on 32-bit builds with KVM]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Book-E TLB matching process should bail out early when a TLB
entry matches, but the access permissions are wrong. The CPU
will then raise a DSI error instead of a Data TLB error, as
described for TLB matching in Freescale and IBM documents.
Signed-off-by: Alex Zuepke <azu@sysgo.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The vpm0 bit was removed from the LPCR in POWER9, this bit controlled
whether ISI and DSI interrupts were directed to the hypervisor or the
partition. These interrupts now go to the hypervisor irrespective, thus
it is no longer necessary to check the vmp0 bit in the LPCR.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The logical partitioning control register controls a threads operation
based on the partition it is currently executing. Add new definitions and
update the mask used when writing to the LPCR based on the POWER9 spec.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 processors implement the mmu as defined in version 3.00 of the ISA.
Add a definition for this mmu model and set the POWER9 cpu model to use
this mmu model.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The DPFD field in the LPCR is 3 bits wide. This has always been defined
as 0x3 << shift which indicates a 2 bit field, which is incorrect.
Correct this.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscvqpudz: VSX Scalar truncate & Convert Quad-Precision format to
Unsigned Doubleword format
xscvqpuwz: VSX Scalar truncate & Convert Quad-Precision format to
Unsigned Word format
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xsaddqpo: VSX Scalar Add Quad-Precision using round to Odd
xsmulqo: VSX Scalar Multiply Quad-Precision using round to Odd
xsdivqpo: VSX Scalar Divide Quad-Precision using round to Odd
xscvqpdpo: VSX Scalar round & Convert Quad-Precision format to
Double-Precision format using round to Odd
xssqrtqpo: VSX Scalar Square Root Quad-Precision using round to Odd
xssubqpo: VSX Scalar Subtract Quad-Precision using round to Odd
In addition, fix the invalid bitmask in the instruction encoding
of xssqrtqp[o].
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
CC: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the available wait instruction implementation.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
slbsync: SLB Synchoronize
The instruction provides an ordering function for the effects of all
slbieg instructions executed by the thread executing the slbsync
instruction.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
slbieg: SLB Invalidate Entry Global
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
stwat: Store Word Atomic
stdat: Store Doubleword Atomic
The instruction includes as function code (5 bits) which gives a detail
on the operation to be performed. The patch implements five such
functions.
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Harish S <harisrir@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ implement stdat, use macro and combine both implementation ]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
lwat: Load Word Atomic
ldat: Load Doubleword Atomic
The instruction includes as function code (5 bits) which gives a detail
on the operation to be performed. The patch implements five such
functions.
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Harish S <harisrir@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ combine both lwat/ldat implementation using macro ]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Provide a new cpu_supports_isa function which allows callers to
determine whether a CPU supports one of the ISA_ flags, by testing
whether the associated struct mips_def_t sets the ISA flags in its
insn_flags field.
An example use of this is to allow boards which generate bootloader code
to determine the properties of the CPU that will be used, for example
whether the CPU is 64 bit or which architecture revision it implements.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
When running certain HMP commands ("info registers", "info cpustats",
"info tlb", "nmi", "memsave" or dumping virtual memory) with the "none"
machine, QEMU crashes with a segmentation fault. This happens because the
"none" machine does not have any CPUs by default, but these HMP commands
did not check for a valid CPU pointer yet. Add such checks now, so we get
an error message about the missing CPU instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1484309555-1935-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 2afbdf8 ("target-i386: exception handling for memory helpers",
2015-09-15) changed tlb_fill's cpu_restore_state+raise_exception_err
to raise_exception_err_ra. After this change, the cpu_restore_state
and raise_exception_err's cpu_loop_exit are merged into
raise_exception_err_ra's cpu_loop_exit_restore.
This actually fixed some bugs, but when SVM is enabled there is a
second path from raise_exception_err_ra to cpu_loop_exit. This is
the VMEXIT path, and now cpu_vmexit is called without a
cpu_restore_state before.
The fix is to pass the retaddr to cpu_vmexit (via
cpu_svm_check_intercept_param). All helpers can now use GETPC() to pass
the correct retaddr, too.
Cc: qemu-stable@nongnu.org
Fixes: 2afbdf8480
Reported-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Tested-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it's not very convenient to use the crash-information property interface,
so provide a CPU class callback to get the guest crash information, and pass
that information in the event
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows reports BSOD parameters through Hyper-V crash MSRs. This
information is very useful for initial crash analysis and thus
it would be nice to have a way to fetch it.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-2-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The HW does not special-case r0, but the ABI specifies that r0 should
contain 0. If we expose this fact to the optimizer, we can simplify
a lot of the generated code. We must of course verify that r0==0, but
that is trivial to do with a TB flag.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The NPC SPR is really only supposed to be used for FPGA debugging.
It contains the same contents as PC, unless one plays games. Follow
the or1ksim implementation in flushing delayed branch state when it
is changed.
The PPC SPR need not be updated every instruction, merely when we
exit the TB or attempt to read its contents.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows the tcg optimizer to see, and fold, all of the
constants involved in a GOT base register load sequence.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Note that the specification for lf.madd.s is confused. It's
the only mention of supposed FPMADDHI/FPMADDLO special registers.
On the other hand, or1ksim implements a somewhat normal non-fused
multiply and add. Mirror that.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Significantly simplifies the implementation of the use of MAC.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Not documented as disabled for user mode.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This avoids having to keep merging and extracting the flag from SR.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Decoding the opcodes in the right order reduces by 100+ lines.
Also, it happens to put the opcodes in the same order as Chapter 17.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fix incorrect overflow calculation. Move overflow exception check
to a helper function, to eliminate inline branches. Remove some
incorrect special casing of R0. Implement multiply inline.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The architecture manual is consistent in using "I" for signed
fields and "K" for unsigned fields. Mirror that.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoids warnings from unused variables etc.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
I am working on testing instruction emulation patches for the linux
kernel. During testing I found these 2 issues:
- sets DSX (delay slot exception) but never clears it
- EEAR for illegal insns should point to the bad exception (as per
openrisc spec) but its not
This patch fixes these two issues by clearing the DSX flag when not in a
delay slot and by setting EEAR to exception PC when handling illegal
instruction exceptions.
After this patch the openrisc kernel with latest patches boots great on
qemu and instruction emulation works.
Cc: qemu-trivial@nongnu.org
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Message-Id: <20170113220028.29687-1-shorne@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch contains several fixes to enable vPMU under TCG mode. It
first removes the checking of kvm_enabled() while unsetting
ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU
under TCG mode. Secondly the PMU node of DT table is now created under TCG.
The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds access support for PMINTENSET_EL1.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-4-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to support Linux perf, which uses PMXEVTYPER register,
this patch adds read/write access support for PMXEVTYPER. The access
is CONSTRAINED UNPREDICTABLE when PMSELR is not 0x1f. Additionally
this patch adds support for PMXEVTYPER_EL0.
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1486504171-26807-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for AArch64 register PMSELR_EL0. The existing
PMSELR definition is revised accordingly.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Moved #ifndef CONFIG_USER_ONLY to cover new regdefs]
Message-id: 1486504171-26807-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for generating the ISS (Instruction Specific Syndrome)
for Data Abort exceptions taken from AArch32. These syndromes are
used by hypervisors for example to trap and emulate memory accesses.
This is the equivalent for AArch32 guests of the work done for AArch64
guests in commit aaa1f954d4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In the ARM ldr/str decode path, rather than directly testing
"insn & (1 << 21)" and "insn & (1 << 24)", abstract these
bits out into wbit and pbit local flags. (We will want to
do more tests against them to determine whether we need to
provide syndrome information.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers. This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.
This version of the patch augments and tidies up comments a little.
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thumb-1 code has some issues in BE32 mode (as currently implemented). In
short, since bytes are swapped within words at load time for BE32
executables, this also swaps pairs of adjacent Thumb-1 instructions.
This patch un-swaps those pairs of instructions again, both for execution,
and for disassembly. (The previous version of the patch always read four
bytes in arm_read_memory_func and then extracted the proper two bytes,
in a probably misguided attempt to match the behaviour of actual hardware
as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for
instruction fetches". It's less complicated to just read the correct
two bytes though.)
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new "cfgend" property which selects whether the CPU resets into
big-endian mode or not. This setting affects whether we reset with
SCTLR_B (ARMv6 and earlier) or SCTLR_EE (ARMv7 and later) set.
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: 11420d1c49636c1790e60578ee996e51f0f0b835.1484929304.git.julian@codesourcery.com
[PMM: use error_report_err() rather than error_report();
move the integratorcp changes to their own patch;
drop an unnecessary extra #include;
rephrase commit message accordingly;
move setting of reset_sctlr above registration of cpregs
so it actually has an effect]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
This is a long overdue ppc pull request for qemu-2.9. It's been a
long time coming due to some holidays and inconveniently timed
problems with testing. So, there's a lot in here:
* More POWER9 instruction implementations for TCG
* The simpler parts of my CPU compatibility mode cleanup
* This changes behaviour to prefer compatibility modes over
"raW" mode for new machine type versions
* New "40p" machine type which is essentially a modernized and
cleaned up "prep". The intention is that it will replace "prep"
once it has some more testing and polish.
* Add pseries-2.9 machine type
* Implement H_SIGNAL_SYS_RESET hypercall
* Consolidate the two alternate CPU init paths in pseries by
making it always go through CPU core objects to initialize CPU
* A number of bugfixes and cleanups
* Stop the guest timebase when the guest is stopped under KVM.
This makes the guest system clock also stop when paused, which
matches the x86 behaviour.
* Some preliminary cleanups leading towards implementation of the
POWER9 MMU.
There are also some changes not strictly related to ppc code, but for
its benefit:
* Limit the pxi-expander-bridge (PXB) device to x86 guests only
(it's essentially a hack to work around historical x86
limitations)
* Some additions to the 128-bit math in host_utils, necessary for
some of the new instructions.
* Revise a number of qtests and enable them for ppc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vLVl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' into staging
ppc patch queue 2017-02-02
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
This is a long overdue ppc pull request for qemu-2.9. It's been a
long time coming due to some holidays and inconveniently timed
problems with testing. So, there's a lot in here:
* More POWER9 instruction implementations for TCG
* The simpler parts of my CPU compatibility mode cleanup
* This changes behaviour to prefer compatibility modes over
"raW" mode for new machine type versions
* New "40p" machine type which is essentially a modernized and
cleaned up "prep". The intention is that it will replace "prep"
once it has some more testing and polish.
* Add pseries-2.9 machine type
* Implement H_SIGNAL_SYS_RESET hypercall
* Consolidate the two alternate CPU init paths in pseries by
making it always go through CPU core objects to initialize CPU
* A number of bugfixes and cleanups
* Stop the guest timebase when the guest is stopped under KVM.
This makes the guest system clock also stop when paused, which
matches the x86 behaviour.
* Some preliminary cleanups leading towards implementation of the
POWER9 MMU.
There are also some changes not strictly related to ppc code, but for
its benefit:
* Limit the pxi-expander-bridge (PXB) device to x86 guests only
(it's essentially a hack to work around historical x86
limitations)
* Some additions to the 128-bit math in host_utils, necessary for
some of the new instructions.
* Revise a number of qtests and enable them for ppc
# gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits)
hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found
ppc/kvm: Handle the "family" CPU via alias instead of registering new types
target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation
target/ppc/mmu_hash64: Fix printing unsigned as signed int
tcg/POWER9: NOOP the cp_abort instruction
target/ppc/debug: Print LPCR register value if register exists
target-ppc: Add xststdc[sp, dp, qp] instructions
target-ppc: Add xvtstdc[sp,dp] instructions
target-ppc: Add MMU model check for booke machines
ppc: switch to constants within BUILD_BUG_ON
target/ppc/cpu-models: Fix/remove bad CPU aliases
target/ppc: Remove unused POWERPC_FAMILY(POWER)
spapr: clock should count only if vm is running
ppc: Remove unused function cpu_ppc601_rtc_init()
target/ppc: Add pcr_supported to POWER9 cpu class definition
powerpc/cpu-models: rename ISAv3.00 logical PVR definition
target-ppc: Add xvcv[hpsp, sphp] instructions
target-ppc: Add xsmulqp instruction
target-ppc: Add xsdivqp instruction
target-ppc: Add xscvsdqp and xscvudqp instructions
...
# Conflicts:
# hw/pci-bridge/Makefile.objs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When running with KVM on POWER, we are registering a "family" CPU
type for the host CPU that we are running on. For example, on all
POWER8-compatible hosts, we register a "POWER8" CPU type, so that
you can always start QEMU with "-cpu POWER8" there, without the
need to know whether you are running on a POWER8, POWER8E or POWER8NVL
host machine.
However, we also have a "POWER8" CPU alias in the ppc_cpu_aliases list
(that is mainly useful for TCG). This leads to two cosmetical drawbacks:
If the user runs QEMU with "-cpu ?", we always claim that POWER8 is an
"alias for POWER8_v2.0" - which is simply not true when running with
KVM on POWER. And when using the 'query-cpu-definitions' QMP call,
there are currently two entries for "POWER8", one for the alias, and
one for the additional registered type.
To solve the two problems, we should rather update the "family" alias
instead of registering a new types. We then only have one "POWER8"
CPU definition around, an alias, which also points to the right
destination.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1396536
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are calculating the authority mask register key value wrong.
The pte entry contains the key value with the two upper bits and the three
lower bits stored separately. We should use these two portions to get a 5
bit value, not or them together which will only give us a 3 bit value.
Fix this.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We were printing an unsigned value as a signed value, fix this.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cp_abort instruction is used to remove the state of an in progress
copy paste sequence. POWER9 compilers add this in various places, such
as context switches which causes illegal instruction signals since we
don't yet implement this instruction.
Given there is no implementation of the copy paste facility and that we
don't claim to support it, we can just noop this instruction.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It can be useful when debugging to print the LPCR value.
Thus we add the LPCR to the "info registers" output if the register had
been defined.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xststdcsp: VSX Scalar Test Data Class Single-Precision
xststdcdp: VSX Scalar Test Data Class Double-Precision
xststdcqp: VSX Scalar Test Data Class Quad-Precision
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xvtstdcsp: VSX Vector Test Data Class Single-Precision
xvtstdcdp: VSX Vector Test Data Class Double-Precision
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Macro calls without a trailing ; look weird in C, this works as a side
effect of how QEMU_BUILD_BUG_ON is implemented. Fix this up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
stub version of MISMATCH_CHECK is empty so it's easy to misuse for
people not building kvm on arm. Use QEMU_BUILD_BUG_ON similar to the
non-stub version to make it easier to catch bugs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
There is no CPU model called "7447_v1.2" in our list, so the
"7447" alias should point to "7447_v1.1" instead. Let's also
remove the "codename" aliases that point to non-implemented
CPU models - they are really of no use here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We do not support POWER1 CPUs in QEMU, so it does not make sense
to keep this stub around.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a port to ppc of the i386 commit:
00f4d64 kvmclock: clock should count only if vm is running
We remove timebase_post_load function, and use the VM state
change handler to save and restore the guest_timebase (on stop
and continue).
We keep timebase_pre_save to reduce the clock difference on
migration like in:
6053a86 kvmclock: reduce kvmclock difference on migration
Time base offset has originally been introduced by commit
98a8b52 spapr: Add support for time base offset migration
So while VM is paused, the time is stopped. This allows to have
the same result with date (based on Time Base Register) and
hwclock (based on "get-time-of-day" RTAS call).
Moreover in TCG mode, the Time Base is always paused, so this
patch also adjust the behavior between TCG and KVM.
VM state field "time_of_the_day_ns" is now useless but we keep
it to be able to migrate to older version of the machine.
As vmstate_ppc_timebase structure (with timebase_pre_save() and
timebase_post_load() functions) was only used by vmstate_spapr,
we register the VM state change handler only in ppc_spapr_init().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
pcr_supported is used to define the supported PCR values for a given
processor. A POWER9 processor can support 3.00, 2.07, 2.06 and 2.05
compatibility modes, thus we set this accordingly.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This logical PVR value now corresponds to ISA version 3.00 so rename it
accordingly.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xvcvhpsp: VSX Vector Convert Half Precision to Single Precision
xvcvsphp: VSX Vector Convert Single Precision to Half Precision
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscvsdqp: VSX Scalar Convert Signed Doubleword format to
Quad-Precision format
xscvudqp: VSX Scalar Convert Unsigned Doubleword format to
Quad-Precision format
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscmpoqp, xscmpuqp & xscmpexpqp were added before f128 field was
introduced in ppc_vsr_t. Now that we have it, use it instead of
generating the 128 bit float using two 64bit fields.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdutrunc. Decimal unsigned truncate. Works like bcdtrunc. with
unsigned BCD numbers.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdtrunc.: Decimal integer truncate. Given a BCD number in vrb and the
number of bytes to truncate in vra, the return register will have vrb
with such bits truncated.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscvqpsdz: VSX Scalar truncate & Convert Quad-Precision format to
Signed Doubleword format
xscvqpswz: VSX Scalar truncate & Convert Quad-Precision format to
Signed Word format
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdsr.: Decimal shift and round. This instruction works like bcds.
however, when performing right shift, 1 will be added to the
result if the last digit was >= 5.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdus.: Decimal unsigned shift. This instruction works like bcds. but
considers only unsigned BCDs (no sign in least meaning 4 bits).
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcds.: Decimal shift. Given two registers vra and vrb, this instruction
shift the vrb value by vra bits into the result register.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This commit fixes a warning in the code "(i * 2) ? .. : ..", which
should be better as "i ? .. : ..", and improves the BCD_DIG_BYTE
macro by placing parentheses around its argument to avoid possible
expansion issues like: BCD_DIG_BYTE(i + j).
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscvqpdp: VSX Scalar round & Convert Quad-Precision format to
Double-Precision format
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscvdpqp: VSX Scalar Convert Double-Precision format to
Quad-Precision format
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Once a compatiblity mode is negotiated with the guest,
h_client_architecture_support() uses run_on_cpu() to update each CPU to
the new mode. We're going to want this logic somewhere else shortly,
so make a helper function to do this global update.
We put it in target-ppc/compat.c - it makes as much sense at the CPU level
as it does at the machine level. We also move the cpu_synchronize_state()
into ppc_set_compat(), since it doesn't really make any sense to call that
without synchronizing state.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use correct FP precision when setting FPRF in FP conversion helpers
instead of always assuming float64 precision.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xscvdphp: VSX Scalar round & Convert Double-Precision format to
Half-Precision format
xscvhpdp: VSX Scalar Convert Half-Precision format to
Double-Precision format
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since helper_compute_fprf() works on float64 argument, rename it
to helper_compute_fprf_float64(). Also use a macro to generate
helper_compute_fprf_float64() so that float128 version of the same
helper can be introduced easily later.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace isden() by float64_is_zero_or_denormal() so that code in
helper_compute_fprf() can be reused to work with float128 argument.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use float64 argument instead of unit64_t in helper_compute_fprf()
This allows code in helper_compute_fprf() to be reused later to
work with float128 argument too.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xxinsertw: VSX Vector Insert Word
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xxextractuw: VSX Vector Extract Unsigned Word
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Current ppc_set_compat() will attempt to set any compatiblity mode
specified, regardless of whether it's available on the CPU. The caller is
expected to make sure it is setting a possible mode, which is awkwward
because most of the information to make that decision is at the CPU level.
This begins to clean this up by introducing a ppc_check_compat() function
which will determine if a given compatiblity mode is supported on a CPU
(and also whether it lies within specified minimum and maximum compat
levels, which will be useful later). It also contains an assertion that
the CPU has a "virtual hypervisor"[1], that is, that the guest isn't
permitted to execute hypervisor privilege code. Without that, the guest
would own the PCR and so could override any mode set here. Only machine
types which use a virtual hypervisor (i.e. 'pseries') should use
ppc_check_compat().
ppc_set_compat() is modified to validate the compatibility mode it is given
and fail if it's not available on this CPU.
[1] Or user-only mode, which also obviously doesn't allow access to the
hypervisor privileged PCR. We don't use that now, but could in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
To continue consolidation of compatibility mode information, this rewrites
the ppc_get_compat_smt_threads() function using the table of compatiblity
modes in target-ppc/compat.c.
It's not a direct replacement, the new ppc_compat_max_threads() function
has simpler semantics - it just returns the number of threads the cpu
model has, taking into account any compatiblity mode it is in.
This no longer takes into account kvmppc_smt_threads() as the previous
version did. That check wasn't useful because we check in
ppc_cpu_realizefn() that CPUs aren't instantiated with more threads
than kvm allows (or if we didn't things will already be broken and
this won't make it any worse).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
