Coverity picked up a copy-paste bug. In vhost_scsi_start() we check for
!k->set_guest_notifiers and error out. The check probably got copied
but instead of erroring we actually use the function pointer!
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Asias He <asias@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new SCSI_DISK_F_NO_REMOVABLE_DEVOPS feature. By this
feature we can set that the scsi-block (scsi pass-through) device will still
be removable from the guest side, but from monitor it cannot be removed.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the bug introduced by this commit ad54ae80c7.
The bdrv_aio_ioctl() still could return null and we should return an error
in that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Issuing the READ CAPACITY(10) command in the guest will cause QEMU
to update its knowledge of the maximum accessible LBA in the disk.
The recorded maximum LBA will be wrong if the disk is bigger than
1TB, because ldl_be_p returns a signed int.
When this is fixed, a latent bug will be unmasked. If the READ
CAPACITY(10) command reported an overflow (0xFFFFFFFF), we must
not overwrite the previously-known maximum accessible LBA, or the guest
will fail to access the disk above the first 2TB.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tray statuses should be also reset. Some guests may lock the tray and
right after resetting the guest it should be unlocked and closed. This
is done on power-on, reset and resume from suspend/hibernate on bare-metal.
This fix is already committed for IDE CD.
Check the commit a7f3d65b65.
Test results on bare-metal:
- on reset/power-on the CD-ROM tray is closed even before the monitor
is turned on
- on resume from suspend/hibernate the tray is also closed before
the monitor is turned on
From test results it seems that this behavior is OS and probably BIOS
independent.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a little strange. It is lowering the parent IRQ pin on input
when HIE is cleared. There is no such behaviour in the real hardware.
ISR changes based on interrupt pin state are already guarded on HIE
being set. So we can just delete this if in its entirety.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
When the Hardware Interrupt Enable (HIE) bit is set, software cannot
change ISR. Add write guard accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Acking a level sensitive interrupt should have no effect if the
interrupt pin is still asserted. The current implementation requires
and edge condition to occur for setting a level sensitive IRQ, which
means an ACK can clear a level sensitive interrupt, until the original
source strobes the interrupt again.
Fix by keeping track of the interrupt pin state and setting ISR based
on this every time update_irq() is called.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
For level sensitive interrupts, ISR bits are cleared when the input pin
is lowered. This is incorrect. Only software can clear ISR bits (via
IAR or direct write to ISR with !MER(2)).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The UART IRQ is edge sensitive, whereas the machine was registering it
as level sensitive. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Paolo Bonzini (4) and others
# Via Peter Maydell
* pmaydell/configury.next:
ppc: Remove CONFIG_FDT conditionals
microblaze: Remove CONFIG_FDT conditionals
arm: Remove CONFIG_FDT conditionals
configure: Require libfdt for arm, ppc, microblaze softmmu targets
configure: dtc: Probe for libfdt_env.h
build: drop TARGET_TYPE
main: use TARGET_ARCH only for the target-specific #define
build: do not use TARGET_ARCH
build: rename TARGET_ARCH2 to TARGET_NAME
Add a stp file for usage from build directory
Message-id: 1371221594-11556-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Copy&paste error in serial.c causes a crash when attempting
to read from UART (if there is no data to be read)
Signed-off-by: Vladimir Senkov <hangup@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
qdev: Drop FROM_QBUS() macro
isa: QOM'ify ISADevice
isa: QOM'ify ISABus
i8259: Convert PICCommonState to use QOM realizefn
kvm/i8259: QOM'ify some more
i8259: QOM'ify some more
i8254: Convert PITCommonState to QOM realizefn
kvm/i8254: QOM'ify some more
i8254: QOM'ify some more
isa: Use realizefn for ISADevice
cs4231a: QOM'ify some more
gus: QOM'ify some more
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-4-git-send-email-peter.maydell@linaro.org
Now that we know we're compiling with libfdt, we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-3-git-send-email-peter.maydell@linaro.org
Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 96f00396338321f5a76c9b86c629b69895e4d2d0.1370496582.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ich6 and ich9 variants either need to inherit one from the other,
or both from a common base class, otherwise its not possible to create
a QOM cast macro for use by the shared implementation functions.
Went for option B, with a common base class.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 54453b6aa8afa1a76b2ec1932f1d7fd25205d0bc.1370496582.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Classic endianness bug due to careless dirty coding: assuming reading
a byte from an int variable gets the least significant byte.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Having size precede the associated pointer is odd. Swap them, and fix
up the types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Improves diagnistics from ad hoc messages like
Invalid SMBIOS UUID string
to
qemu-system-x86_64: -smbios type=1,uuid=gaga: Invalid UUID
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Michael Tokarev (4) and others
# Via Michael Tokarev
* mjt/trivial-patches-next: (26 commits)
piix: fix some printf errors when debug is enabled
cputlb: fix debug logs
create qemu_openpty_raw() helper function and move it to a separate file
main-loop: do not include slirp/slirp.h, use libslirp.h instead
libcacard/vscclient: fix leakage of socket on error paths
linux-headers: Update to v3.10-rc5
KVM: PPC: Add dummy kvm_arch_init_irq_routing()
KVM: S390: Add dummy kvm_arch_init_irq_routing()
KVM: ARM: Add dummy kvm_arch_init_irq_routing()
ivshmem: add missing error exit(2)
hw/xen: Use g_free instead of free and fix potential memory leaks
target-sparc: Replace free by g_free
hw/scsi: Don't increment a boolean value
device tree: Fix cppcheck warning
Makefile: Install qemu-img and qemu-nbd man pages only if built
Unbreak -no-quit for GTK, validate SDL options
gtk: implement -full-screen
char/serial: serial_ioport_write: Factor out common code
char/serial: Use generic Fifo8
char/serial: cosmetic fixes.
...
Message-id: 1371207042-17980-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of looping over all CPUArchState, use a helper to obtain the
desired CPUState.
Free the "cpu" variable for PowerPCCPU, to access its CPUPPCState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of looping over all CPUArchState, use a helper to obtain the
desired CPUState directly. Saves a CPUPPCState variable and QOM cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
If the user fails to specify 'chardev' or 'shm' then we cannot continue.
Exit right away so that we don't invoke shm_open(3) with a NULL pointer.
It would be nice to replace exit(1) with error returns in the PCI device
.init() function, but leave that for another patch since exit(1) is
currently used elsewhere.
Spotted by Coverity.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The wrong functions and the missing calls of g_free were reported
by cppcheck.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These three lines are common to both FIFO and regular mode. Just factor
them out to outside the if rather than replicate the same lines inside
both if and else.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use the generic Fifo8 helper provided by QEMU, rather than re-implement
privately.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some cosmetic fixes to char/serial fixing some checkpatch errors.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use qemu_set_irq rather than if-elsing qemu_irq_(lower|raise). No
functional change, just reduces verbosity.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The CPUID model values on Conroe, Penryn, and Nehalem are too
conservative and don't reflect the values found on real Conroe, Penryn,
and Nehalem CPUs.
This causes at least one known problems: Windows XP disables sysenter
when (family == 6 && model <= 2), but Skype tries to use the sysenter
instruction anyway because it is reported as available on CPUID, making
it crash.
This patch sets appropriate model values that correspond to real Conroe,
Penryn, and Nehalem CPUs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some CPU model fixes are going to be included and they will require
compatibility properties in the pc-*-1.5 machine-types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QMP command "{ 'execute': 'cpu-add', 'arguments': { 'id': -1 }}" may cause
QEMU SIGSEGV at:
piix4_cpu_hotplug_req ()
...
g->sts[cpu_id / 8] |= (1 << (cpu_id % 8));
...
Since for PC in current implementation id should be in range [0...maxcpus)
and maxcpus is already checked, add check for lower bound and error out
on incorrect value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Jason Wang (1) and Stefan Hajnoczi (1)
# Via Stefan Hajnoczi
* stefanha/net:
tap: fix NULL dereference when passing invalid parameters to tap
vmxnet3: fix NICState cleanup
Message-id: 1370613288-14933-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a stream notify function is not ready, it may re-populate the notify call-
back to indicate it should be re-polled later. This break in this usage, as
immediately following the notify() call, .notify is set to NULL. reverse the
ordering of the notify call and NULL assignment accordingly.
[PC: Reworked commit message]
Signed-off-by: Wendy Liang <jliang@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Obviously the code wanted to mask the lower bits but failed to do so
because of a missing "<".
cppcheck detected a conditional expression which was always true (1 < 7).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
# By Kevin Wolf (19) and others
# Via Stefan Hajnoczi
* stefanha/block: (26 commits)
hmp: add parameters device and -v for info block
hmp: show ImageInfo in 'info block'
qmp: add ImageInfo in BlockDeviceInfo used by query-block
block: add image info query function bdrv_query_image_info()
block: add snapshot info query function bdrv_query_snapshot_info_list()
ide-test: Add FLUSH CACHE test case
ide: Set BSY bit during FLUSH
ide-test: Add enum value for DEV
blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK events
Make qemu-io commands available in HMP
qemu-io: Use the qemu version for -V
qemu-io: Interface cleanup
qemu-io: Move remaining helpers from cmd.c
qemu-io: Move command_loop() and friends
qemu-io: Move functions for registering and running commands
qemu-io: Move qemu_strsep() to cutils.c
qemu-io: Move 'quit' function
qemu-io: Move 'help' function
qemu-io: Factor out qemuio_command
qemu-io: Split off commands to qemu-io-cmds.c
...
Message-id: 1370606325-10680-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of having the parent provide PICCommonClass::init,
let the children override DeviceClass::realize themselves.
This pushes the responsibility of saving and calling the parent's
realizefn to the children.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of having the parent provide PITCommonClass::init,
let the children override DeviceClass::realize themselves.
This pushes the responsibility for saving and calling the parent's
realizefn to the children.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The implementation of the ATA FLUSH command invokes a flush at the block
layer, which may on raw files on POSIX entail a synchronous fdatasync().
This may in some cases take so long that the SLES 11 SP1 guest driver
reports I/O errors and filesystems get corrupted or remounted read-only.
Avoid this by setting BUSY_STAT, so that the guest is made aware we are
in the middle of an operation and no ATA commands are attempted to be
processed concurrently.
Addresses BNC#637297.
Suggested-by: Gonglei (Arei) <arei.gonglei@huawei.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Interpretation of the ccws to register (configuration) indicators contained
a thinko: We want to disallow reading from 0, but setting the indicator
pointer to 0 is fine.
Let's fix the handling for CCW_CMD_SET{,_CONF}_IND.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix an off-by-one error when indicating availablity of concurrent
sense data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Use qemu_del_nic() instead of qemu_del_net_client() to correctly free
the entire NICState.
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* sstabellini/xen_fixes_20130603:
xen: use pc_init_pci instead of pc_init_pci_no_kvmclock
xen: remove xen_vcpu_init
xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)
xen_machine_pv: do not create a dummy CPU in machine->init
main_loop: do not set nonblocking if xen_enabled()
xen: simplify xen_enabled
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Stefan Hajnoczi (6) and others
# Via Kevin Wolf
* kwolf/for-anthony:
block: dump snapshot and image info to specified output
block: move qmp and info dump related code to block/qapi.c
block: move snapshot code in block.c to block/snapshot.c
block: drop bs_snapshots global variable
qemu-iotests: make create_image() common
qemu-iotests: make compare_images() common
qemu-iotests: make cancel_and_wait() common
qemu-iotests: make assert_no_active_block_jobs() common
block: add block driver read only whitelist
qemu-iotests: fix 054 cluster size help output
Message-id: 1370349940-4703-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some pci-related cleanups,
and fw cfg cleanups which will be useful for on-going
pci related work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRq6EsAAoJECgfDbjSjVRplKYIALtUF6RtKyOR6bSo1YvI203y
huzLkLP675D2cEFbjBsjJFLcQPXUbj78taePMgFwlLzKWCrV0wTuAX21Sd3m4i/p
P4BZzXd50EgRwxtpTBOu7jgboZbL/3TuVpRYDiGz5pRnWw/NBOPYbbi1Trj53nXg
lwOq8E1HZyBo7pniLkYsUuScXzmqQ5qqNDU0r5eQURKkqaIXJN6ZFlXb0N6IgWMZ
ytX5FGi22pIzQwf5oxKRrIbko1dyy+Jn5xoykEz9AbP+mt+kvTqjAkzO7cCSCmSq
DOYQT4EsGnokM2CVwdZEbjgjJ+nTrzwf7VbvMIlWOSHyPYBBMjBXXYhwsC/fuU8=
=Adz/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: misc cleanups
This includes some pci-related cleanups,
and fw cfg cleanups which will be useful for on-going
pci related work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 02 Jun 2013 02:46:52 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and Laszlo Ersek (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pvpanic: use FWCfgState explicitly
fw_cfg: fw_cfg is a singleton
fw_cfg: add API to find FW cfg object
fw_cfg: move typedef to qemu/typedefs.h
refer to FWCfgState explicitly
apic: rename apic specific bitopts
firmware_abi: move to include/hw/nvram/
dec.c - move to pci-bridge
q35: set fw_name
Message-id: 1370202787-3712-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Unify function and type naming
* use dynamic cast whenever possible
* simplify Debug printf.
* use new style device intialization.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Message-id: 1369839656-24466-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even if we do not register newly created RAM MemoryRegion for migration with
vmstate_register_ram_global() function, ram_save_setup() still saves this region
to snapshot file with empty idstr=="". Consequently this results in error during
VM loading in ram_load().
Register rom_mem for migration.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-3-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exynos SoC was misusing memory_region_init_ram_ptr(): this interface can safely
be used only for memory regions which size is a multiple of target page size.
Change chipid_and_omr memory to an mmio region to fix this.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-2-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no common code between these 2 timer implementation.
So it is better to split them.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1368990197-19694-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU models two (of the three) ACMD41 has two modes, "inquiry" and
"first". The selection logic for which of the two is incorrect - it
compares != 0 for the entire argument value rather than only bits 23:0
as per the spec. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3ef0a7fd1b2f3ebb23b4fdeabcc14caf3fad6d71.1369622254.git.peter.crosthwaite@xilinx.com
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The end of transfer check was occurring and potentially returning before
the interrupt flag was checked. This means the interrupt will be missed
if it occurs on the last packet. Fix by checking for the interrupt
before checking for the end of transfer.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 9969ec154777957ec738fc4e539d68e7494d0081.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This message was printing out the data in decimal only, which is not
very friendly to the debugging developer. Add hex variant in
parenthesis to make it consistent with other similar messages in this
module.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: d624179649137832eaa8caa263ef9589b4395d5e.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This interrupt is not risen after the last block is written to sd. It
is mutually exclusive with the end of transfer conditions. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 7ca9fd3e03ce1bec94aff08f607c15a0ec3d3371.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The data_count variable was being reset on every transfer, including
DMA transfer resumptions. This is incorrect, it should only be set
on a new command.
Manifests as a bug when using ADMA and there is a timer delay between
ADMA frames where the fifo is left in a non empty state.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 15a98609cc32315211b0963091a8efd67522e160.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The LQSPI bus attachment supports byte/halfword and misaligned
accesses. Fixed. Refactored the LQSPI cache to be byte-wise
instead of word wise accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 5ec47b13563ad2d22105a1f26186d7756718394b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do 16 words per fifo flush. Increases performance and decreases
debug verbosity. This data depth has no real hardware analogue,
so just go with something that has reasonable performance.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 5621ee4621941d3639b5cacfdec26bd3148f31d5.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The debug printfs on every SPI operation is extremely verbose. Add
a second level of debug for this.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: f63478b8e5b29cc011cdc10e29f8537bb2fc2b5e.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is worth keeping track of when debugging the device model.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: d3b44ecf23d671798b062eee5dc362c716ea54cd.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QSPI controller was using byte-wide stripes when striping across
the two flashes in dual parallel mode. The real hardware however uses
individual bit striping. QEMU misbehaves in the (corner) case where
data is written/read in dual-parallel mode and read/written back in
single mode.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 718a61df1bf746ec06f6da44d12f8317af7b08ce.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CTRL register was RAZ/WI on some of the RW bits. Even though the
function behind these bits is invalid in QEMU, they should still be
guest accessible. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: b7aaad93163ce4af0c428635804ac7b77a567b25.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The LQSPI mode is supposed to work via the automatic CS mode feature
rather than manipulate CS lines itself. Now that auto CS is implemented
remove LQSPIs CS mode override logic. There is still a need to
manipulate the U_PAGE bit in LQSPI config register to implement
dual-stack mode however.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 000c8dd54df09523f17052638100722ef0f5a3af.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the automatic CS control feature. If the MANUAL_CS bit is
cleared then the chip select stay de-asserted as long as the tx FIFO
is empty.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1d67383adc42761af715a93f161344b9284dfc9a.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SPI has a mode where it automatically starts based on tx fifo
occupancy. Implemented.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: f4e9accb5de87b526fff6ed937f63278db76533b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Invalidate the LQSPI cached page when transitioning into LQSPI mode.
Otherwise there is a possibility that the controller will return stale
data to the guest when transitioning back to LQ_MODE after a page
program.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 677490a6ee1953fe5d366e599d665de645ac84db.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QSPI has a bigger FIFO than the regular SPI controller. Differentiate
between the two with correct FIFO sizes for each.
This is the first piece of class data for SPIPS, so this patch sees
the creation of the XilinxSPIPSClass definition and assoicated QOM
constructs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: acee25dd5e203215cbc15ca5d3cb5d5b2efebe7b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
You really need this is you want to track a guest banging on LQSPI.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 26e508da4af11058d37daa777064c9e5c2a69abb.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The real hardware does not produce interrupts in LQSPI mode. Inhibit
generation of interrupts when the LQ_MODE bit is set.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: dff794a06872009ea7e5733ce6adcff94d18bbd0.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By default these interrupts are clear on read.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 999ff0091ed3cc3969a431bf55c00ef934cecc8e.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make SPI and QSPI different classes. QSPIPS is setup as a child of SPIPS.
Only QSPI has the LQSPI functionality, so move all that to the child class.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 2cdd0cadb5ba77ca02fde5cae627852dc9a64c71.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Call kvmclock_create only if kvmclock_enabled.
Use pc_init_pci on Xen rather than pc_init_pci_no_kvmclock.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
No need for xen_vcpu_init anymore:
- the RTC emulator doesn't have any periodic timers continuously running
even in absence of guest interactions anymore;
- qemu_dummy_start_vcpu takes care of disabling TCG for us, so we don't
need to do it manually here.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
We are currently setting the PCI hole to start at HVM_BELOW_4G_RAM_END,
that is 0xf0000000.
Start the PCI hole at 0xe0000000 instead, that is the same value used by
pc_init1 and qemu-xen-traditional.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: qemu-stable@nongnu.org
This fixes a regression introduced by:
commit 62fc403f11
Author: Igor Mammedov <imammedo@redhat.com>
Date: Mon Apr 29 18:54:13 2013 +0200
target-i386: Attach ICC bus to CPU on its creation
X86CPU should have parent bus so it could provide bus for child APIC.
The commit makes it mandatory to pass a valid ICC bus to cpu_x86_create,
but cpu_x86_init just passes NULL to it.
xen_machine_pv uses cpu_x86_init, therefore it has been broken.
This patch fixes the problem by removing the dummy CPU creation
altogether from xen_init_pv, relying on the fact that QEMU can now cope
with a machine without an emulated CPU.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
CC: imammedo@redhat.com
CC: qemu-stable@nongnu.org
# By Gerd Hoffmann (5) and others
# Via Gerd Hoffmann
* kraxel/usb.83:
xhci: add live migration support
xhci: add xhci_init_epctx
xhci: add xhci_alloc_epctx
xhci: add XHCISlot->addressed
pci: add VMSTATE_MSIX
host-libusb: Correct test for USB packet state
Fix usage of USB_DEV_FLAG_IS_HOST flag.
Message-id: 1370253951-12323-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Ed Maste (3) and others
# Via Michael Tokarev
* mjt/trivial-patches:
do not check pointers after dereferencing them
m25p80: Add Micron n25q032a
qemu: fix out of tree cross compile
slirp: cleanup leftovers from misc.h
migration: Remove duplicate bandwidth_limit set
docs: Fix typo and update file in migration
configure: try pkg-config ncurses first
rtc: remove rtc_set_date
linux-user: Fix typo in comment
configure: remove confusing file manipulation
debugcon: fix compiler warning when open DEBUG_DEBUGCON
debugcon: make debug message more readable
debugcon: fix always print "addr=0x0, val=0x0" bug when use DEBUG_DEBUGCON
Remove unnecessary break statements
don't run pkg-config for features explicitly disabled
Message-id: 51A9CCFB.1000109@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With all preparing pieces in place we can finally drop in
the vmstate structs and the postload function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out endpoint context initialization to a separate function.
xhci live migration will need that too, in post_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out endpoint context allocation to a separate function.
xhci live migration will need that too, in post_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using a trick cut+pasted from vmstate_scsi_device
to wind up msix_save and msix_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
USB_RET_ASYNC is -6, so inflight was always false.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USB_DEV_FLAG_IS_HOST is the bit number, not value. Booting with a
"Fitbit Base Station" USB dongle was triggering this assert.
Signed-off-by: Michael Marineau <mike@marineau.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit d08151bf (conversion of tcx to the memory API) broke the 24-bit mode of
the tcx display adapter by accidentally passing in the final address of the
dirty region to memory_region_reset_dirty() instead of its size.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make sure we only have a single instance ever:
because if it isn't we can't find it so it's
useless anyway.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove some code duplication by adding a
function to look up the fw cfg file.
This way, we don't need to duplicate same strings everywhere.
Use by both fw cfg and pvpanic device.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently some places use pointer-to-void even though they mean
pointer-to-FWCfgState. Clean them up.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
apic has its own version of bitops, with the
difference that it works on u32 and not long.
Add apic_ prefix to avoid namespace clashes.
We should look into reusing standard bitops long-term,
but that's not entirely trivial.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
firmware_abi.h with structs for OpenBIOS landed in hw/sparc/ by mistake
- move it to hw/nvram/ alongside fw_cfg.h. In addition to sparc it's
included from ppc mac_nvram.c and will need to include it from prep.c in
the future.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Looks like dec.c is in pci-host by mistake.
Moving it over to pci-bridge.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
compiler warnings:
CC hw/char/debugcon.o
hw/char/debugcon.c: In function ‘debugcon_ioport_write’:
hw/char/debugcon.c:58: warning: format ‘%02x’ expects type ‘unsigned int’, but argument 3 has type ‘uint64_t’
hw/char/debugcon.c: In function ‘debugcon_ioport_read’:
hw/char/debugcon.c:70: warning: format ‘%04x’ expects type ‘unsigned int’, but argument 2 has type ‘hwaddr’
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix these warnings from cppcheck:
hw/display/cirrus_vga.c:2603:
hw/sd/sd.c:348:
hw/timer/exynos4210_mct.c:1033:
target-arm/translate.c:9886:
target-s390x/mem_helper.c:518:
target-unicore32/translate.c:1936:
style: Consecutive return, break, continue, goto or throw statements are unnecessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recent virtio refactoring in QEMU made virtio-bus become the parent bus
of scsi-bus, and virtio-bus doesn't have get_fw_dev_path implementation,
typename will be added to fw_dev_path by default, the new fw_dev_path
could not be identified by seabios. It causes that bootindex parameter
of scsi device doesn't work.
This patch implements get_fw_dev_path() in BusClass, it will be called
if bus doesn't implement the method, tyename will be added to
fw_dev_path. If the implemented method returns NULL, nothing will be
added to fw_dev_path.
It also implements virtio_bus_get_fw_dev_path() to return NULL. Then
QEMU will still pass original style of fw_dev_path to seabios.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1369814202-10346-1-git-send-email-akong@redhat.com
--
v2: only add nothing to fw_dev_path when get_fw_dev_path() is
implemented and returns NULL. then it will not effect other devices
don't have get_fw_dev_path() implementation.
v3: implement default get_fw_dev_path() in BusClass
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
PCI host bridges need to set fw_name to be discoverable
by bios for boot device selection.
In particular, seabios expects root device to be called
"/pci/@i0cf8", so let's set it up like that for Q35.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Amos Kong <akong@redhat.com>
The implementation is wrong for kvm, and it's unused anyway.
Drop it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130528102023.GA30055@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When pc-sysfw.rom_only == 0, flash memory will be
usable with kvm. In order to enable flash memory mode,
a pflash device must be created. (For example, by
using the -pflash command line parameter.)
Usage of a flash memory device with kvm requires
KVM_CAP_READONLY_MEM, and kvm will abort if
a flash device is used with an older kvm which does
not support this capability.
If a flash device is not used, then qemu/kvm will
operate in the original rom-mode.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-5-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The isapc machine with seabios currently requires the BIOS region
to be read/write memory rather than read-only memory.
KVM currently cannot support the BIOS as a ROM region, but qemu
in non-KVM mode can. Based on this, isapc machine currently only
works with KVM.
To work-around this isapc issue, this change avoids marking the
BIOS as readonly for isapc.
This change also will allow KVM to start supporting ROM mode
via KVM_CAP_READONLY_MEM.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-2-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Aneesh Kumar K.V (3) and Gabriel de Perthuis (1)
# Via Aneesh Kumar K.V
* aneesh/for-upstream:
hw/9pfs: Be robust against paths without FS_IOC_GETVERSION
hw/9pfs: Use O_NOFOLLOW when opening files on server
hw/9pfs: use O_NOFOLLOW for mapped readlink operation
hw/9pfs: Fix segfault with 9p2000.u
Message-id: 87zjvevx4s.fsf@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
9P optionally uses the FS_IOC_GETVERSION ioctl to get information about
a file's version (sometimes called generation number).
The code checks for supported filesystems at mount time, but some paths
may come from other mounted filesystems.
Change it to treat unsupported paths the same as unsupported
filesystems, returning 0 in both cases.
Note: ENOTTY is the error code for an unsupported ioctl.
This fix allows booting a linux kernel with the same / filesystem as the
host; otherwise the boot fails when mounting devtmpfs.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
9p server should never follow a symlink. So use O_NOFOLLOW with all open
syscall
Tested-by: "M. Mohan Kumar" <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
With mapped security models like mapped-xattr and mapped-file, we save the
symlink target as file contents. Now if we ever expose a normal directory
with mapped security model and find real symlinks in export path, never
follow them and return proper error.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
When guest tries to chmod a block or char device file over 9pfs,
the qemu process segfaults. With 9p2000.u protocol we use wstat to
change mode bits and client don't send extension information for
chmod. We need to check for size field to check whether extension
info is present or not.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Sun4c and Sun4d architectures and related CPUs are not fully implemented
(especially Sun4c MMU) and there has been no interest for them.
Likewise, a few CPUs (Cypress, Ross etc) are only half implemented.
Remove the machines and CPUs, they can be re-added if needed later.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
# By Paolo Bonzini (11) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
memory: clean up phys_page_find
memory: populate FlatView for new address spaces
memory: limit sections in the radix tree to the actual address space size
s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62
memory: fix address space initialization/destruction
memory: make memory_global_sync_dirty_bitmap take an AddressSpace
memory: do not duplicate memory_region_destructor_none
memory: Rename readable flag to romd_mode
memory: Replace open-coded memory_region_is_romd
memory: allow memory_region_find() to run on non-root memory regions
memory: assert that PhysPageEntry's ptr does not overflow
exec: eliminate stq_phys_notdirty
exec: make qemu_get_ram_ptr private
exec: eliminate qemu_put_ram_ptr
exec: remove obsolete comment
Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.
So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Net queues support efficient "receive disable". For example, tap's file
descriptor will not be polled while its peer has receive disabled. This
saves CPU cycles for needlessly copying and then dropping packets which
the peer cannot receive.
rtl8139 is missing the qemu_flush_queued_packets() call that wakes the
queue up when receive becomes possible again.
As a result, the Windows 7 guest driver reaches a state where the
rtl8139 cannot receive packets. The driver has actually refilled the
receive buffer but we never resume reception.
The bug can be reproduced by running a large FTP 'get' inside a Windows
7 guest:
$ qemu -netdev tap,id=tap0,...
-device rtl8139,netdev=tap0
The Linux guest driver does not trigger the bug, probably due to a
different buffer management strategy.
Reported-by: Oliver Francke <oliver.francke@filoo.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Christophe Lyon (1) and others
# Via Michael Tokarev
* mjt/trivial-patches:
target-moxie: replace target_phys_addr_t with hwaddr
Rename hexdump to avoid FreeBSD libutil conflict
remove some double-includes
translate: remove redundantly included qemu/timer.h
Remove twice include of qemu-common.h
fix /proc/self/maps output
Message-id: 51977B44.1000302@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support guest MSI affinity changes update the MSI message any time
the guest writes to the address or data fields.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130513201840.5430.86331.stgit@bling.home
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Virtio-net driver currently negotiates network offloads
on startup via features mechanism and have no ability to
disable and re-enable offloads later.
This patch introduced a new control command that allows
to configure device network offloads state dynamically.
The patch also introduces a new feature flag
VIRTIO_NET_F_CTRL_GUEST_OFFLOADS.
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130520081814.GA8162@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This unbreaks cross compile builds:
configure --target-list="i386-softmmu" --cpu=i386
When building on a 64bit machine.
Reported-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 926326e96fd8685d74e9d5bf430fe4ad97a55289.1369191585.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368718348-15199-1-git-send-email-emaste@freebsd.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 215e47b9 enabled TRIM by default, which revealed a bug in TRIM
support for the IDE macio emulation driver, introduced in d353fb72.
The call to dma_bdrv_io() is using a wrong opaque of type IDEState
instead of DBDMA_io. This patch fixes that.
Fixes LP#1179104
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds virtio_bus_get_dev_path to fix migration id string which is wrong
since the virtio refactoring.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368723967-21050-1-git-send-email-fred.konrad@greensocs.com
Cc: mdroth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although we try our best to automatically detect broken versions
of Linux which assume the old broken IRQ mapping we used to implement
for our model of the Versatile PCI controller, it turns out that
some particularly new kernels manage to outwit the autodetection.
We therefore provide a property for enabling the old broken IRQ
mapping, so that if users happen to have such a kernel they can
work around its deficiencies with the command line option:
-global versatile_pci.broken-irq-mapping=1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Newer versatilepb kernels still don't get the IRQ mapping right
for the PCI controller, but they get it differently wrong (they add
a fixed +64 offset to everything they write to PCI_INTERRUPT_LINE).
Update the autodetection to handle these too, and include a more
detailed comment on the various different behaviours that might
be present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 5f37ef92b7.
It turns out that some kernels incorrectly depend on the
old QEMU behaviour of not putting the host PCI bridge device
where the hardware puts it, because they use a swizzling IRQ
mapping which is incorrect but happens to match up with old
broken QEMU when the slot number mod 4 is zero. Since we
start PCI devices at 11, if we put the host bridge at 29
then the first real PCI device goes at 11 and doesn't work.
Not putting the host bridge at 29 means it defaults to 11,
so the first real PCI device is at 12 and works.
Since continuing with the old behaviour doesn't cause problems
for kernels which do work with hardware, the simplest fix for
this is to revert the change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This forwards the name and the type of virtio-net-x to fix the bad
behaviour of "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds virtio_net_set_netclient_name, which is used to set the
name and type shown in "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 9953f8822c.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Dong Xu Wang (2) and others
# Via Michael Tokarev
* mjt/trivial-patches-next:
osdep.h: include sys/types.h for ssize_t definition
remove double semicolons
clean unnecessary code: don't check g_strdup arg for NULL
docs: mention AddressSpaces in docs/memory.txt
audio: update documentation after removing --audio-card-list option
m25p80.c: Sync Flash chip list with Linux
bsd-user: OS-agnostic 64-bit SYSCTL types
Message-id: 518F61B9.9050803@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new devices for various manufacturers, and re-sort Spansion list to
match the order in Linux, which requires chips with a non-zero extended ID
to come first.
With this commit the outstanding differences to Linux rev 55bf75b are:
- Erase size flag differences in s25sl032p, s25sl064p, s25fl016k, s25fl064k
(These devices have only some blocks that support small erase sizes.)
- Linux lacks n25q128
- Devices without a Jedec ID have been excluded
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With a SPICE_DISPLAY_CAP_MONITORS_CONFIG capable client, the client needs to
know what part of the primary to use for each monitor. If the guest driver
does not support this, the server sends messages to the client for a
single monitor spanning the entire primary.
As soon as the guest calls spice_qxl_monitors_config_async once, the server
sets the red_worker driver_has_monitors_config flag and stops doing this.
This is a problem when the driver gets unloaded, for example after a reboot
or when switching to a text vc with usermode mode-setting under Linux.
To reproduce this start a multi-mon capable Linux guest which uses
usermode mode-setting and then once X has started switch to a text vc. Note
how the client window does not only not resize, if you try to resize it
manually you always keep blackborders since the aspect is wrong.
This patch calls a new spice-server method called spice_qxl_driver_unload
which clears the driver_has_monitors_config flag inside the server, thereby
fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Kevin Wolf (7) and Fam Zheng (3)
# Via Kevin Wolf
* kwolf/for-anthony:
qemu-iotests: fix 017 018 for vmdk
qemu-iotests: exclude vmdk and qcow from 043
qemu-iotests: exclude vmdk for test 042
qtest/ide-test: Test short and long PRDTs
qtest/ide-test: Add simple DMA read/write test case
qtest: Add IDE test case
libqos/pci: Enable bus mastering
ide: Reset BMIDEA bit when the bus master is stopped
de_DE.po: Add missing leading spaces
ahci: Don't allow creating slave drives
Message-id: 1368023344-29731-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are several several issues in the current checking:
- The check was based on the minus of unsigned values which can overflow
- It was done after .{set|get}_config() which can lead crash when config_len
is zero since vdev->config is NULL
Fix this by:
- Validate the address in virtio_pci_config_{read|write}() before
.{set|get}_config
- Use addition instead minus to do the validation
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Petr Matousek <pmatouse@redhat.com>
Message-id: 1367905369-10765-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
mask notifiers are never called without msix,
so devices with backend masking like vhost don't work.
Call mask notifiers explicitly at
startup/cleanup to make it work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The device is supposed to reset the Bus Master IDE Active bit in the
status register when 0 is written to the Start/Stop Bus Master bit in
the command register.
In the common cases this happens automatically because bdrv_drain_all()
flushes the requests, but with a large PRDT it could remain set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An IDE bus provided by AHCI can only take a single IDE drive. If you add
a drive as slave, qemu used to accept the command line but the device
wouldn't be actually usable. Catch the situation instead and error out.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Gerd Hoffmann (3) and Hans de Goede (1)
# Via Gerd Hoffmann
* kraxel/usb.82:
xhci: handle USB_RET_BABBLE
uhci: Use an intermediate buffer for usb packet data
usb-host: add usb_host_full_speed_compat
usb-host: live migration support for the libusb version
Message-id: 1367920207-1404-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 32993698 (vhost: disable on tap link down) tries to disable the vhost
also when the peer's link is down. But the check was not done properly, the
vhost were only started when:
1) peer's link is not down
2) virtio-net has already been started.
Since == have a higher precedence than &&, place a brace to make sure both the
conditions were met then does the check. This fixes the crash when doing a savem
after set the link off which let qemu crash and complains:
virtio_net_save: Assertion `!n->vhost_started' failed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1366972060-21606-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Eduardo Habkost (6) and others
# Via Andreas Färber
* afaerber/qom-cpu:
target-i386: n270 can MOVBE
target-i386: Introduce generic CPUID feature compat function
target-i386: Change CPUID model of 486 to 8
target-i386: Emulate X86CPU subclasses for global properties
qdev: Introduce qdev_prop_set_globals_for_type()
qdev: Let qdev_prop_parse() pass through Error
target-i386: Add "filtered-features" property to X86CPU
target-i386: Introduce X86CPU::filtered_features field
target-i386: Add "feature-words" property to X86CPU
target-i386: Use FeatureWord loop on filter_features_for_kvm()
target-i386: Add ECX information to FeatureWordInfo
Due to various unfortunate reasons we cannot reliable detect a guest
cancelling a packet as soon as it happens, instead we detect cancels
with some delay.
When packets are handled async, and we directly pass the guest memory for
the packet to the usb-device as iovec, this means that the usb-device can
write to guest-memory which the guest has already re-used for other purposes
-> not good!
This patch fixes this by adding an intermediate buffer and writing back not
only the result, but also the data, of async completed packets when scanning
the schedule.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alloes to pass through usb2 devices on usb1 host controllers if possible.
Brings the libusb implementation to feature-parity with the linux usbfs
code, so the usb-host implementation in 1.5 (libusb) doesn't regress
compared to 1.4 (usbfs).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Atom core (cpu name "n270" in QEMU speak) supports MOVBE. This is
needed when booting 3.8 and later linux kernels built with the MATOM
target because we require MOVBE in order to boot properly now.
Signed-off-by: Borislav Petkov <bp@suse.de>
[ehabkost: added compat code to disable MOVBE on pc-*-1.4 and older]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390: update s390-ccw.img
S390: BIOS boot from given device
S390: Add virtio-blk boot
S390: Merging s390_ipl_cpu and s390_ipl_reset
S390: BIOS create link to src folder for .img file
S390: BIOS check for file
Reuse it in qdev_prop_set_globals().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Renamed from qdev_prop_set_custom_globals()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
If no kernel IPL entry is specified, boot the bios and pass if available
device information for the first boot device (as given by the boot index).
The provided information will be used in the next commit from the BIOS.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
There is no use in have this splitted in two functions.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a check if the BIOS blob exists before trying to load.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Normally, the "tap" device is polled by QEMU if a guest NIC can
receive packets. If a guest NIC is stopped during transfer (rmmod or
ifdown), it may still have packets in a queue which have to be send
to the guest before QEMU enables polling of a "tap" interface via
tap_update_fd_handler().
However the spapr_llan device was missing the qemu_flush_queued_packets()
call so the tap_send_completed() callback was never called and therefore
"tap" interface polling was not enabled ever.
The patch fixes this problem.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
We should sync params->ram_size after we fixup memory size on
a alignment boundary. Otherwise Guest would exceed the actual
memory region.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
ePAPR defines the initial values of cpu registers.
This patch initialize the GPRs as per ePAPR specification.
This resolves the issue of guest reboot/reset (guest hang on reboot).
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: add whitespace line]
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to a brain outage, this message says "out-of-boards" instead of
"out-of-bounds".
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR defines LIOBNs (Logical IO Bus Numbers) to be 32-bit, and we check for
values that aren't in the code for H_PUT_TCE. This patch factors the check
into spapr_tce_find_by_liobn(), which already checks if a 32-bit LIOBN
actually exists. This will become more important as future patches add
other hypercalls which need to look up a LIOBN.
At the same time we fix the typo in the message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
# By Andreas Färber (1) and others
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Make System I/O port 0092 read/write
prep: Add ELF support for -bios
prep: Fix NIP reset value
# By Jean-Christophe DUBOIS
# Via Peter Maydell
* pmaydell/arm-devs.next:
i.MX: implement a more correct version of EPIT timer.
Message-id: 1367603215-5120-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Port 0x0092 is documented as read/write, so for now return the
endianness state instead of hardcoded 0x00.
Signed-off-by: Julio Guerra <guerr@julio.in>
[AF: Extracted from larger port 0092 patch]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This prepares for switching from OpenHack'Ware to OpenBIOS.
While touching the error handling code, switch from aborting hw_error()
to fprintf()+exit() and suppress failing without -bios for qtest.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
The value was changed by commit 09d9828ace
"PPC: fix hreset_vector for 60x, ...".
Change it back for prep machine to unbreak OpenHack'Ware.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This patch is providing a complete version of the EPIT timer.
Note, however that the GPT timer in the same file is still not
complete.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1365624982-15647-1-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
[PMM: wrapped an overly long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 2f7bd829db "qdev: Fix device_add bus assumptions"
it's possible to device_add bus-less device, but if such device is
unplugged it will dereference NULL parent_bus in qdev_unplug().
Fix it by taking in account that parent_bus might be NULL and
skipping bus check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1367587536-14964-1-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the possibility to create a scsi-bus with a specified name.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add virtio_device_set_child_bus_name function.
It will be used with virtio-serial-x and virtio-scsi-x to set the
child bus name before calling virtio-x-device's init.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the proxy id is set, this bus takes the name "id.0" which is expected
to be the virtio-device's first bus.
So force this name to "virtio-bus" as it is an internal bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Igor Mammedov (21) and others
# Via Andreas Färber
* afaerber/qom-cpu: (29 commits)
Drop redundant resume_all_vcpus() from main()
cpus: Fix pausing TCG CPUs while in vCPU thread
target-i386: Replace cpuid_*features fields with a feature word array
target-i386: Break CPUID feature definition lines
target-i386/kvm.c: Code formatting changes
target-i386: Group together level, xlevel, xlevel2 fields
pc: Implement QEMUMachine::hot_add_cpu hook
QMP: Add cpu-add command
Add hot_add_cpu hook to QEMUMachine
target-i386: Move APIC to ICC bus
target-i386: Attach ICC bus to CPU on its creation
target-i386: Introduce ICC bus/device/bridge
cpu: Move cpu_write_elfXX_note() functions to CPUState
kvmvapic: Make dependency on sysbus.h explicit
target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZE
target-i386: Do not allow to set apic-id once CPU is realized
target-i386: Introduce apic-id CPU property
target-i386: Introduce feat2prop() for CPU properties
acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guest
cpu: Add helper cpu_exists(), to check if CPU with specified id exists
...
This replaces the feature-bit fields on both X86CPU and x86_def_t
structs with an array.
With this, we will be able to simplify code that simply does the same
operation on all feature words (e.g. kvm_check_features_against_host(),
filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit
property lookup/registration, and the proposed "feature-words" property)
The following field replacements were made on X86CPU and x86_def_t:
(cpuid_)features -> features[FEAT_1_EDX]
(cpuid_)ext_features -> features[FEAT_1_ECX]
(cpuid_)ext2_features -> features[FEAT_8000_0001_EDX]
(cpuid_)ext3_features -> features[FEAT_8000_0001_ECX]
(cpuid_)ext4_features -> features[FEAT_C000_0001_EDX]
(cpuid_)kvm_features -> features[FEAT_KVM]
(cpuid_)svm_features -> features[FEAT_SVM]
(cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
similiar -> similar
recieve -> receive
transfered -> transferred
preperation -> preparation
Most changes are in comments, one modifies a parameter name in a function
prototype.
The spelling fixes were made using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It allows APIC to be hotplugged.
* map APIC's mmio at board level if it is present
* do not register mmio region for each APIC, since
only one is used/mapped
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
X86CPU should have parent bus so it could provide bus for child APIC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Provides a hotpluggable bus for APIC and CPU.
* icc-bridge will serve as a parent for icc-bus and provide
mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
and IOAPIC devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Allows kvmvapic to compile if sysbus.h is removed from apic_internal.h,
from which it is indirectly included.
sysbus.h will be removed from apic_internal.h after converting
APICs to ICCDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Put APIC_SPACE_SIZE in a public header so that it can be
reused elsewhere later.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The property is used from board level to set APIC ID for CPUs it
creates. Do so in a new pc_new_cpu() helper, to be reused for hot-plug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* introduce processor status bitmask visible to guest at 0xaf00 addr,
where ACPI asl code expects it
* set bit corresponding to APIC ID in processor status bitmask on
receiving CPU hot-plug notification
* trigger CPU hot-plug SCI, to notify guest about CPU hot-plug event
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It provides updated currently available CPUs count to BIOS on reboot.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 14f9b664 (hw/virtio-net.c: set config size using host features) tries to
calculate config size based on the host features. But it forgets the
VIRTIO_NET_F_MAC were always set for qemu later. This will lead a zero config
len for virtio-net device when both VIRTIO_NET_F_STATUS and VIRTIO_NET_F_MQ were
disabled form command line. Then qemu will crash when user tries to read the
config of virtio-net.
Fix this by counting VIRTIO_NET_F_MAC and make sure the config at least contains
the mac address.
Cc: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1366874814-2658-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets seabios patch the corresponding SSDT entry.
Also add fw_cfg object to /machine/fw_cfg so we can reference
it elsewhere.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 60c65d95fe2b23b12bea67099126566010a11a1a.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pvpanic device is used to send guest panic event from guest to qemu.
When guest panic happens, pvpanic device driver will write a event
number to IO port 0x505(which is the IO port occupied by pvpanic device,
by default). On receiving the event, pvpanic device will pause guest
cpu(s), and send a qmp event QEVENT_GUEST_PANICKED.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Better than just releasing the error object silently.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 517E68FC.6030400@siemens.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduced when applying commit f81222b (audio: look for the ISA and
PCI buses, 2013-04-18).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1367330432-14417-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-21-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Drop reserved underscore from struct name while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-20-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST() and
container_of(). Prepares for ISA realizefn.
Remove reserved underscore from struct name while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-19-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST() and
container_of(). Prepares for ISA realizefn.
Unify function naming scheme while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-18-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-17-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-16-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-15-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-14-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-13-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-12-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-11-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-10-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-9-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST() and
container_of().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-8-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Add missing braces.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-7-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Eliminate DO_UPCAST() for PICCommonState. Prepares for ISA realizefn.
Also give the i8259_common type registration functions unique names
while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-6-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-5-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Reuse type constant for PC machine compatibility settings.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-4-git-send-email-afaerber@suse.de
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a typedef for the state struct and rename from Status to State.
Add type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-2-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Multiqueue patchset conditionally add control vq only when guest negotiate the
feature. Though the spec is not clear on this but it breaks the minix guest
since it will identify the ctrl vq even if it does not support it. Though this
behavior seems a violation on the spec "If the VIRTIO_NET_F_CTRL_VQ feature bit
is negotiated, identify the control virtqueue.", to keep the backward
compatibility, always add the ctrl vq at end of the queues.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1366874663-2566-1-git-send-email-jasowang@redhat.com
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Cole Robinson
# Via Alon Levy
* alon/libcacard_ccid.2:
ccid: Fix crash when backend isn't specified
Message-id: 20130426234357.GA12457@garlic.tami
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Every PCI Slot in PBM has 4 directly mapped IRQ lines.
Use the IRQ routing schema 0bssnn (Bus, Slot, interrupt Number)
described in Section 19.3.3 of UltraSPARC™-IIi User's Manual.
Please note that this patch requires the OpenBIOS counterpart patch.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- clear interrupts only on writing to the interrupt clear registers
- don't overwrite a currently active interrupt request
- use the correct addresses for the interrupt clear registers
(section 19.3.3.3 of the UltraSPARC™-IIi User’s Manual)
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to UltraSPARC™-IIi User’s Manual, PBM has 64 IRQ lines.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (30 commits)
target-ppc: add support for extended mtfsf/mtfsfi forms
target-ppc: emulate store doubleword pair instructions
target-ppc: emulate load doubleword pair instructions
target-ppc: emulate lfiwax instruction
target-ppc: emulate fcpsgn instruction
target-ppc: emulate prtyw and prtyd instructions
target-ppc: emulate cmpb instruction
target-ppc: add instruction flags for Book I 2.05
disas: Disassemble all ppc insns for the guest
target-ppc: optimize fabs, fnabs, fneg
PPC: Fix dcbz for linux-user on 970
powerpc: correctly handle fpu exceptions.
pseries: Generate device paths for VIO devices
pseries: Convert VIO code to QOM style type safe(ish) casts
target-ppc: Synchronize VPA state with KVM
pseries: Fix some small errors in XICS logic
target-ppc: Add more stubs for POWER7 PMU registers
pseries: Fixes and enhancements to L1 cache properties
pseries: Fix incorrect calculation of RMA size in certain configurations
PPC: Fix compile with profiling enabled
...
This patch implements a get_dev_path qdev hook for the pseries paravirtual
VIO bus. With upcoming savevm support, this will become very important for
scsi disks hanging of VIO virtual SCSI adapters. scsibus_get_dev_path
uses the get_dev_path of the parent adapter if available, but otherwise
just uses a local channel/target/lun number to identify the device. So if
two disks are present in the system having the same target and lun on
seperate VIO scsi adapters, savevm cannot distinguish them. Since the
conventional way of using VSCSI adapters is to have just one disk per
adapter, such a conflict is very likely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Curerntly the pseries VIO device code contains quite a few explicit
uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe,
and not the conventional way of doing things in the QOM model. This
patch converts the code to use the QOM convention of per-type macros
to do verified casts with OBJECT_CHECK().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Under certain circumstances the emulation for the pseries "XICS" interrupt
controller was clearing a pending interrupt from the XISR register, without
also clearing the corresponding priority variable. This will cause
problems later when can trigger sanity checks in the under-development
in-kernel XICS implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR requires that the device tree's CPU nodes have several properties
with information about the L1 cache. We already create two of these
properties, but with incorrect names - "[id]cache-block-size" instead
of "[id]-cache-block-size" (note the extra hyphen).
We were also missing some of the required cache properties. This
patch adds the [id]-cache-line-size properties (which have the same
values as the block size properties in all current cases). We also
add the [id]-cache-size properties.
Adding the cache sizes requires some extra infrastructure in the
general target-ppc code to (optionally) set the cache sizes for
various CPUs. The CPU family descriptions in translate_init.c can set
these sizes - this patch adds correct information for POWER7, I'm
leaving other CPU types to people who have a physical example to
verify against. In addition, for -cpu host we take the values
advertised by the host (if available) and use those to override the
information based on PVR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
On -M mac99, we can run 970 CPUs. However, these CPUs define the initial
instruction pointer they start execution at as part of their bootup protocol,
so effectively it's up to the board to decide where they start.
This went unnoticed, because they used to boot at the same location our flash
was mapped to, but due to the recent reset changes our 970 CPUs want to reset
to 0x100 now, which is always a 0 instruction.
Set the initial IP to something reasonable for -M mac99.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Enable the KVM emulated watchdog if KVM supports (use the
capability enablement in watchdog handler). Also watchdog exit
(KVM_EXIT_WATCHDOG) handling is added.
Watchdog state machine is cleared whenever VM state changes to running.
This is to handle the cases like return from debug halt etc.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: rebase to current code base, fix non-kvm cases]
Signed-off-by: Alexander Graf <agraf@suse.de>
This value is not needed if we use correctly the MSR[IP] bit.
excp_prefix is always 0x00000000, except when the MSR[IP] bit is
implemented and set to 1, in that case excp_prefix is 0xfff00000.
The handling of MSR[IP] was already implemented but not used at reset
because the value of env->msr was changed "manually".
The patch uses the function hreg_store_msr() to set env->msr, this
ensures a good handling of MSR[IP] at reset, and therefore a good value
for excp_prefix.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Older KVM versions don't support EPR which breaks guests when we announce
MPIC variants that support EPR.
Catch that case and expose only MPIC version 2.0 which tells the guest that
we don't support the EPR capability yet.
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: Add comment, route cap check through kvm_ppc.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
I don't see any reason why these properties are missing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Note: Need to apply virtio-rng-refactoring first!
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since we now have working firmware for s390-ccw in the tree, we can
default to it on our s390-ccw machine, rendering it more useful.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a virtio-s390 and a virtio-ccw machine in QEMU. Both use vastly
different ways to do I/O. Having the same firmware blob for both doesn't
really make any sense.
Instead, let's parametrize the firmware file name, so that we can have
different blobs for different machines.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our firmware blob is always a raw file that we load at a fixed address today.
Support loading an ELF blob instead that we can map high up in memory.
This way we don't have to be so conscious about size constraints.
Signed-off-by: Alexander Graf <agraf@suse.de>
We can have different load addresses for different blobs we boot with.
Make the reset IP dynamic, so that we can handle things more flexibly.
Signed-off-by: Alexander Graf <agraf@suse.de>
If a guest neglected to register (secondary) indicators but still runs
with notifications enabled, we might end up writing to guest zero;
avoid this by checking for valid indicators and only writing to the
guest and generating an interrupt if indicators have been setup.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Use of a flash memory device for the BIOS was added in series "[PATCH
v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1.
Flash vs. ROM is a guest-visible difference. Thus, flash use had to
be suppressed for machine types pc-1.0 and older. This was
accomplished by adding a dummy device "pc-sysfw" with property
"rom_only":
* Non-zero rom_only means "use ROM". Default for pc-1.0 and older.
* Zero rom_only means "maybe use flash". Default for newer machines.
Not only is the dummy device ugly, it was also retroactively added to
the older machine types! Fortunately, it's not guest-visible (thus no
immediate guest ABI breakage), and has no vmstate (thus no immediate
migration breakage). Breakage occurs only if the user unwisely
enables flash by setting rom_only to zero. Patch review FAIL #1.
Why "maybe use flash"? Flash didn't (and still doesn't) work with
KVM. Therefore, rom_only=0 really means "use flash, except when KVM
is enabled, use ROM". This is a Bad Idea, because it makes enabling/
disabling KVM guest-visible. Patch review FAIL #2.
Aside: it also precludes migrating between KVM on and off, but that's
not possible for other reasons anyway.
Fix as follows:
1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts,
or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything
for older machines (to remain bug-compatible).
2. Change the default value from 0 to 1 for these machines.
Necessary, because 0 doesn't work with KVM. Once it does, we can flip
the default back to 0.
3. Don't revert the retroactive addition of device "pc-sysfw" to older
machine types. Seems not worth the trouble.
4. Add a TODO comment asking for device "pc-sysfw" to be dropped once
flash works with KVM.
Net effect is that you get a BIOS ROM again even when KVM is disabled,
just like for machines predating the introduction of flash.
To get flash instead, use "--global pc-sysfw.rom_only=0".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the next commit easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the commit after next easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Alon Levy (15) and others
# Via Alon Levy
* alon/libcacard_ccid.1: (28 commits)
libcacard/cac: change big switch functions to single return point
dev-smartcard-reader: empty implementation for Mechanical (fail correctly)
libcacard: move atr setting from macro to function
libcacard/vreader: add debugging messages for apdu
dev-smartcard-reader: copy atr protocol to ccid parameters
dev-smartcard-reader: change default protocol to T=0
dev-smartcard-reader: define structs for CCID_Parameter internals
ccid-card-passthru, dev-smartcard-reader: add debug environment variables
ccid-card-passthru: add atr check
libcacard: change default ATR
dev-smartcard-reader: reuse usb.h definitions
dev-smartcard-reader: support windows guest
dev-smartcard-reader: remove aborts (never triggered, but just in case)
dev-smartcard-reader: nicer debug messages
dev-smartcard-reader: white space fixes
libcacard: remove default libcoolkey loading
libcacard: remove sql: prefix
libcacard: teach vscclient to use GMainLoop for portability
libcacard: vscclient to use QemuThread for portability
libcacard: split vscclient main() from socket reading
...
Message-id: 921423767.1475937.1366790789930.JavaMail.root@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This clean the init and the exit functions and rename virtio_common_cleanup
to virtio_cleanup.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove virtio-bindings, and use class instead.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the init, exit functions as they are no longer used.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio_x_bus_new are only used in file scope.
So this make them static.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This add two functions:
* virtio_bus_set_vdev_config.
* virtio_bus_set_vdev_feature.
Needed by virtio-ccw.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-rng-pci, virtio-rng-s390 and virtio-rng-ccw are
switched to the new API, we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-ccw is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-s390 is modified for the new API. The device
virtio-rng-s390 extends virtio-s390-device as before. It creates and
connects a virtio-rng during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-pci is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
The virtio_pci_reset function, is removed as no longer used.
The virtio_pci_rst function, is renamed virtio_pci_reset.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-rng-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The configuration field must not be a pointer as it will be used for
virtio-rng properties. So *conf is replaced by conf.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a linked list of keyboard handlers. Added handlers will go
to the head of the list. Removed handlers will be zapped from
the list. The head of the list will be used for events.
This fixes the keyboard-dead-after-usb-kbd-unplug issue, key events
will be re-routed to the ps/2 kbd instead of being discarded.
[ v2: fix cut+paste bug found my Markus ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1366798118-3248-3-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We don't support T=1 so we shouldn't advertise it by default.
Two independent changes:
* Default ATR
sets T=0. This gets overwritten by the client provided ATR later.
* Class descriptor
changes dwAdvertise dwProtocols.PPPP to 0x1 and dwProtocols.RRRR=0 per spec.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
Introduces a new utility function: parse_debug_env to avoid code
duplication.
This overrides whatever debug value is set on the corresponding devices
from the command line, and is meant to ease the usage with any
management stack. For libvirt you can set environment variables by
extending the dom namespace, i.e:
<domain type='kvm' id='3' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<qemu:commandline>
<qemu:env name='QEMU_CCID_PASSTHRU_DEBUG' value='4'/>
<qemu:env name='QEMU_CCID_DEBUG' value='4'/>
</qemu:commandline>
</domain>
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
By not advertising USB wakeup support (which we don't).
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
Program received signal SIGSEGV, Segmentation fault.
__strcmp_sse42 () at ../sysdeps/x86_64/multiarch/strcmp-sse42.S:164
164 movdqu (%rsi), %xmm2
(gdb) bt
at /home/elmarco/320g/src/qemu/hw/ccid-card-emulated.c:477
at /home/elmarco/320g/src/qemu/hw/ccid-card-emulated.c:503
Signed-off-by: Marc-André Lureau <mlureau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Move the TPM passthrough specific command line options to the passthrough
backend implementation and attach them to the backend's interface structure.
Add code to tpm.c for validating the TPM command line options.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryan <coreyb@linux.vnet.ibm.com>
Message-id: 1366641699-21420-1-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-9p-pci is switched to the new API, we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init function as it is no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-9p-pci is modified for the new API. The device
virtio-9p-pci extends virtio-pci. It creates and connects a
virtio-9p-device during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-9p-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allows to remove one FIXME. Makes LIBUSB_LOG_LEVEL_WARNING build errors
go away. And starting with that version libusb has a LIBUSBX_API_VERSION
define which allows to easily #ifdef version dependencies should that
need arrive in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint. And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With pipelining it is possible to encounter a finished packet when cleaning
the queue due to a halt. This happens when a non stall error happens while
talking to a real device. In this case the queue on the usb-host side will
continue processing packets, and we can have completed packets waiting in
the queue after an error condition packet causing a halt.
There are 2 reasons to discard the completed packets at this point, rather
then trying to writing them back to the guest:
1) The guest expect to be able to cancel and/or change packets after the
packet with the error without doing an unlink, so writing them back may
confuse the guest.
2) Since the queue does not advance when halted, the writing back of these
packets will fail anyways since p->qtdaddr != q->qtdaddr, so the
ehci_verify_qtd call in ehci_writeback_async_complete_packet will fail.
Note that 2) means that then only functional change this patch introduces
is the printing of a warning when this scenario happens.
Note that discarding these packets means that the guest driver and the device
will get out of sync! This is unfortunate, but should not be a problem since
with a non stall error (iow an io-error) the 2 are out of sync already anyways.
Still this patch adds a warning to signal this happening.
Note that sofar this has only been seen with a DVB-T receiver, which gives
of a MPEG-2 stream, which allows for recovering from lost packets, see:
https://bugzilla.redhat.com/show_bug.cgi?id=890320
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simplify the creation of the cancel path given the TPM's device path.
Given the path /dev/tpm0 build the path /sys/class/misc/tpm0/device/cancel.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1366146516-23814-1-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
virtio: simplify Makefile conditionals
virtio-scsi: create VirtIOSCSICommon
vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
scsi: VMWare PVSCSI paravirtual device implementation
scsi: avoid assertion failure on VERIFY command
Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Amos Kong (1) and Luiz Capitulino (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
virtio-balloon: fix integer overflow in BALLOON_CHANGE QMP event
monitor: fix the wrong order of releasing keys
Message-id: 1366375833-995-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/versatile_pci: Drop unnecessary vpb_pci_config_addr()
versatile_pci: Expose PCI memory space to system
arm/realview: Fix mapping of PCI regions
versatile_pci: Implement the PCI controller's control registers
versatile_pci: Implement the correct PCI IRQ mapping
versatile_pci: Put the host bridge PCI device at slot 29
versatile_pci: Use separate PCI I/O space rather than system I/O space
versatile_pci: Change to subclassing TYPE_PCI_HOST_BRIDGE
versatile_pci: Update to realize and instance init functions
versatile_pci: Expose PCI I/O region on Versatile PB
versatile_pci: Fix hardcoded tabs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The WWPN specified in configfs is passed to "-device vhost-scsi-pci".
The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not
available from the QEMU command-line. Instead, I hardcode it to zero.
Changes in Patch-v2:
- Add vhost_scsi_get_features() in order to determine feature bits
supports by host kernel (mst + nab)
- Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
EVENT_IDX to be disabled by host in vhost_scsi_get_features()
- Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES
Changes in Patch-v1:
- Set event_idx=off by default (nab, thanks asias)
- Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to
re-enable in v3.10 (nab)
- Update to latest qemu.git/master HEAD
Changes in WIP-V3:
- Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha)
- Add CONFIG_VHOST_SCSI (asias, thanks stefanha)
- Add hotplug feature bit
Changes in WIP-V2:
- Add backend guest masking support (nab)
- Bump ABI_VERSION to 1 (nab)
- Set up set_guest_notifiers (asias)
- Set up vs->dev.vq_index (asias)
- Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias)
- Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias)
Howto:
Use the latest seabios, at least commit b44a7be17b
git clone git://git.seabios.org/seabios.git
make
cp out/bios.bin /usr/share/qemu/bios.bin
qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off
...
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
[ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature
negotiation and irqfd masking - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch refactors existing virtio-scsi code into VirtIOSCSICommon
in order to allow virtio_scsi_init_common() to be used by both internal
virtio_scsi_init() and external vhost-scsi-pci code.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Stefan Weil (3) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
m25p80: Remove bogus include of devices.h
ssh: Remove unnecessary use of strlen function.
block/ssh: Add missing gcc format attributes
linux-user: change do_semop to return target errno when unsuccessful
w64: Fix compiler warnings (wrong format specifier)
Remove unneeded type casts
virtio.h: drop unused function prototypes
bswap: fix compiler warning
Message-id: 1366371241-23430-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRbIJQAAoJECgfDbjSjVRpQuoH/RfMHb6YYfsuwJKUsjCKxhdr
695YqNsBLmh7E/+wr1dwUsKrMGSF97VSGAIPeX0u4wwP6jrORhA9iycCevXYlh/S
O7RTcePqVEQrwnMX5rOAEWGARVzg4hAT8i4Pdza1A+gBvaO/WLZIVJfUOHBAZNL7
2TTDymfixipErcTcxckITHfaShn9ajZgt/Yo8oVX70VqklWU+OEU/tYEXmvTC0H3
bTuTU3vpeAlCubF0AHHZqWA9g7myrKMCxwv4LWx7gmQGXoyQesy4s5C9KMrld1On
RovLw0REbtjB2xGjAj3g82ESK5eoi295Th/E7Fu1NJNYyDyfhxB7/cnbRa+Wpsg=
=jvZE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: add pci test device
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: add pci test device
kvm: support non datamatch ioeventfd
kvm: support any size for pio eventfd
kvm: remove unused APIs
Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Because dev->actual is uint32_t, the expression 'dev->actual <<
VIRTIO_BALLOON_PFN_SHIFT' is truncated to 32 bits. This overflows when
dev->actual >= 1048576.
To reproduce:
1. Start a VM with a QMP socket and 5G of RAM
2. Connect to the QMP socket, negotiate capabilities and issue:
{ "execute":"balloon", "arguments": { "value": 1073741824 } }
3. Watch for BALLOON_CHANGE QMP events, the last one will incorretly be:
{ "timestamp": { "seconds": 1366228965, "microseconds": 245466 },
"event": "BALLOON_CHANGE", "data": { "actual": 5368709120 } }
To fix it this commit casts it to ram_addr_t, which is ram_size's type.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Drop the vpb_pci_config_addr() function -- it is unnecessary since
the size of the memory regions means the hwaddr is always within
the 24 bit size. (This function was probably a leftover from when
read/write functions were called with absolute addresses rather
than relative ones.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
The VersatilePB's PCI controller exposes the PCI memory space to the
system via three regions controlled by the mapping control registers.
Implement this so that guests can actually use MMIO-BAR PCI cards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Fix the mapping of the PCI regions for the realview board, which were
all incorrect. (This was never noticed because the Linux kernel
doesn't actually include a PCI driver for the realview boards.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
The versatile_pci PCI controller has a set of control registers which
handle the mapping between PCI and system address spaces. Implement
these registers (though for now they have no effect since we don't
implement mapping PCI space into system memory at all).
The most natural order for our sysbus regions has the control
registers at the start, so move all the others down one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Implement the correct IRQ mapping for the Versatile PCI controller; it
differs between realview and versatile boards, but the previous QEMU
implementation was correct only for the first PCI card on a versatile
board, since we weren't swizzling IRQs based on the slot number.
Since this change would otherwise break any uses of PCI on Linux kernels
which have an equivalent bug (since they have effectively only been
tested against QEMU, not real hardware), we implement a mechanism
for automatically detecting those broken kernels and switching back
to the old mapping. This works by looking at the values the kernel
writes to the PCI_INTERRUPT_LINE register in the config space, which
is effectively the interrupt number the kernel expects the device
to be using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On real hardware the host bridge appears as a PCI device in slot 29,
so make QEMU put its host bridge in that slot too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Rather than overloading the system I/O space (which doesn't even make
any sense on ARM) for PCI I/O, create an memory region in the PCI
controller and use that to represent the I/O space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Change versatile_pci to subclass TYPE_PCI_HOST_BRIDGE and generally
handle PCI in a more QOM-like fashion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Update the Versatile PCI controller to use a realize function rather
than SysBusDevice::init. To reflect the fact that the 'realview_pci'
class is taking most of its implementation from 'versatile_pci' (and
to make the QOM casts work) we make 'realview_pci' a subclass of
'versatile_pci'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Comments in the QEMU source code claim that the version of the PCI
controller on the VersatilePB board doesn't support the PCI I/O
region, but this is incorrect; expose that region, map it in the
correct location, and drop the misleading comments.
This change removes the only currently implemented difference
between the realview-pci and versatile-pci models; however there
are other differences in not-yet-implemented functionality, so we
retain the distinction between the two device types.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
There is just one line in this source file with a hardcoded tab
indent, so just fix it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
I think in the early revisions of this we had an instantiation helper
for the device in devices.h. This was later removed and this header was
left over. Removed
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cpu_physical_memory_read, cpu_physical_memory_write take any pointer
as 2nd argument without needing a type cast.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch follows MST's recommendation to move checks for
vhost_verify_ring_mappings() -> cpu_physical_memory_map() operations
from MemoryListener->region_[add,del]() -> vhost_set_memory() into
final MemoryListener->commit() -> vhost_commit() callback.
It addresses the case where virtio-scsi vq ioport RAM re-mapping
to read-only SeaBIOS ROM triggers a cpu_physical_memory_map()
NIL MemoryRegionSection pointer failure.
Also save vhost_dev->mem_changed_[start,end]_addr values in
vhost_set_memory() for final ranges_overlap checks. (Thanks Paolo!)
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A verify command is not an actual read (we do not implement
compare mode) and thus does not have an AIOCB attached. Do
not crash in scsi_dma_complete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-net-pci and virtio-net-s390 are switched to the new API,
we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-net-ccw is modified for the new API. The device
virtio-net-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-net-s390 is modified for the new API. The device
virtio-net-s390 extends virtio-s390-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-net-pci is modified for the new API. The device
virtio-net-pci extends virtio-pci. It creates and connects a
virtio-net-device during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-net-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Hans de Goede (5) and others
# Via Gerd Hoffmann
* spice/spice.v69:
spice-qemu-char: vmc_write: Don't write more bytes then we're asked too
spice-qemu-char: Remove intermediate buffer
spice-qemu-char: Add watch support
spice-qemu-char: Remove #ifdef-ed code for old spice-server compat
virtio-console: Remove any pending watches on close
virtio-console: Also throttle when less was written then requested
spice: (32 bit only) fix surface cmd tracking destruction
qxl: add 2000x2000 and 2048x2048 video modes
qxl: add 4k + 8k resolutions
Message-id: 1366106194-28826-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Igor Mammedov (8) and others
# Via Andreas Färber
* afaerber/qom-cpu:
target-cris: Override do_interrupt for pre-v32 CPU cores
qdev: Set device's parent before calling realize() down inheritance chain
cpu: Pass CPUState to *cpu_synchronize_post*()
target-i386: Split out CPU creation and features parsing
target-i386/cpu.c: Coding style fixes
ioapic: Replace FROM_SYSBUS() with QOM type cast
kvmvapic: Replace FROM_SYSBUS() with QOM type cast
target-i386: Split APIC creation from initialization in x86_cpu_realizefn()
target-i386: Consolidate error propagation in x86_cpu_realizefn()
qdev: Add qdev property for bool type
target-i386: Improve -cpu ? features output
target-i386: Fix including "host" in -cpu ? output
Reimplement usb-host on top of libusb.
Reasons to do this:
(1) Largely rewritten from scratch, nice opportunity to kill historical
cruft.
(2) Offload usbfs handling to libusb.
(3) Have a single portable code base instead of bsd + linux variants.
(4) Bring usb-host support to any platform supported by libusbx.
For now this goes side-by-side to the existing code. That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively. Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.
Thanks to qdev the old and new code can coexist nicely on linux. Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).
The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Is good enougth for unique device addresses and avoids the need for any
state for device addressing. Makes live migration support easier. Also
makes device->slot lookups trivial.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Check for port reset first and skip everything else then.
Add sanity checks for PLS updates.
Add PLC notification when entering PLS_U0 state.
This gets host-initiated port resume going on win8.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb-serial has a qdev chardev property, and hw/qdev-properties-system.c
already contains:
static void release_chr(Object *obj, const char *name, void *opaque)
{
DeviceState *dev = DEVICE(obj);
Property *prop = opaque;
CharDriverState **ptr = qdev_get_prop_ptr(dev, prop);
CharDriverState *chr = *ptr;
if (chr) {
qemu_chr_add_handlers(chr, NULL, NULL, NULL, NULL);
qemu_chr_fe_release(chr);
}
}
So doing the qemu_chr_add_handlers(s->cs, NULL, NULL, NULL, NULL); from
the usb handle_destroy function too will lead to it being done twice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is necessary so that we get properly woken up to write the rest.
This patch also changes the len argument to the have_data callback, to
avoid doing an unsigned signed comparison.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No change for 64 bit arches, but for 32 bit previously we zeroed half
the surfaces cmd array, instead of all of it.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If there is no backing bdrv, let the debugging developer know about it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
