Add hotplug/unplug interface for memory device.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-9-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In dsdt, acpi ged irq should use gsi number, and the
VIRT_SCI_IRQ means it.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-8-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add RAMFB device to dynamic_sysbus_devices list so that it can be
hotpluged to the machine.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-7-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add hotplug handler for LoongArch virt machine and now only support
the dynamic sysbus device.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-6-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add platform bus support and add the bus information such as address,
size, irq number to FDT table.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-5-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add interrupt information to FDT table, such as interrupt
controller info, compatiable info, etc.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-4-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Support fw_cfg dma function for LoongArch virt machine.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Remove the vga device when loongarch machine init and
we will support other display device in the future.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-2-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
test_bit uses header->type as an offset; if the file incorrectly specifies a
type greater than 127, smbios_entry_add will read and write garbage.
To fix this, just pass the smbios data through, assuming the user knows what
to do. Reported by Coverity as CID 1487255.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Overwriting "path" in the second call to g_strdup_printf() causes a memory leak,
even if the variable itself is g_autofree.
Reported by Coverity as CID 1460454.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0. This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero. (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)
Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Arm system emulation targets always have TARGET_BIG_ENDIAN clear, so
there is no need to have handling in armv7m_load_kernel() for the
case when it is defined. Remove the unnecessary code.
Side notes:
* our M-profile implementation is always little-endian (that is, it
makes the IMPDEF choice that the read-only AIRCR.ENDIANNESS is 0)
* if we did want to handle big-endian ELF files here we should do it
the way that hw/arm/boot.c:arm_load_elf() does, by looking at the
ELF header to see what endianness the file itself is
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In more recent Raspbian OS Linux kernels, the fb driver gives up
immediately if RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS fails or no
displays are reported.
This change simply always reports one display. It makes bcm2835_fb work
again with these more recent kernels.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Message-Id: <20220812143519.59134-1-Enrik.Berkhan@inka.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cortex A35 core and enable it for virt board.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When running under Xen and the guest reboots, it boots into a new domain
with a new QEMU process (and a new swtpm process if using the emulator
backend). The existing reset function is triggered just before the old
QEMU process exists which causes QEMU to startup the TPM backend and
then immediately shut it down. This is probably harmless but when using
the emulated backend, it wastes CPU and IO time reloading state, etc.
Fix this by calling the reset function directly from realize() when
running under Xen. During a reboot, this will be called by the QEMU
process for the new domain.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20220826143841.1515326-1-ross.lagerwall@citrix.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Qemu virt machine can support few cache events and cycle/instret counters.
It also supports counter overflow for these events.
Add a DT node so that OpenSBI/Linux kernel is aware of the virt machine
capabilities. There are some dummy nodes added for testing as well.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Historically, The mtime/mtimecmp has been part of the CPU because
they are per hart entities. However, they actually belong to aclint
which is a MMIO device.
Move them to the ACLINT device. This also emulates the real hardware
more closely.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).
Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)
Based on above, we update QEMU RISC-V to:
1) Have separate config options for Smaia and Ssaia extensions
which replace RISCV_FEATURE_AIA in CPU features
2) Not generate AIA INTC compatible string in virt machine
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220820042958.377018-1-apatel@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"platform" is not a valid name for a bus node in dt-schema, so warnings
can be see in dt-validate on a dump of the riscv virt dtb:
/stuff/qemu/qemu.dtb: platform@4000000: $nodename:0: 'platform@4000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
"platform-bus" is a valid name, so use that instead.
CC: Rob Herring <robh@kernel.org>
Fixes: 11d306b9df ("hw/arm/sysbus-fdt: helpers for platform bus nodes addition")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-5-mail@conchuod.ie
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reset and poweroff features of the syscon were originally added to
top level, which is a valid path for a syscon subnode. Subsequently a
reorganisation was carried out while implementing NUMA in which the
subnodes were moved into the /soc node. As /soc is a "simple-bus", this
path is invalid, and so dt-validate produces the following warnings:
/stuff/qemu/qemu.dtb: soc: poweroff: {'value': [[21845]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-poweroff']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
/stuff/qemu/qemu.dtb: soc: reboot: {'value': [[30583]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-reboot']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
Move the syscon subnodes back to the top level and silence the warnings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220810184612.157317-4-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 18df0b4695 ("hw/riscv: virt: Allow creating multiple NUMA sockets")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When optional AIA PLIC support was added the to the virt machine, the
address cells property was removed leading the issues with dt-validate
on a dump from the virt machine:
/stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property
From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
Add back the property to suppress the warning.
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-3-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"uart" is not a node name that complies with the dt-schema.
Change the node name to "serial" to ix warnings seen during
dt-validate on a dtbdump of the virt machine such as:
/stuff/qemu/qemu.dtb: uart@10000000: $nodename:0: 'uart@10000000' does not match '^serial(@.*)?$'
From schema: /stuff/linux/Documentation/devicetree/bindings/serial/8250.yaml
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-2-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 04331d0b56 ("RISC-V VirtIO Machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot
entirely is probably not advisable, but it does at least show signs of
life. Recent Linux kernel versions make use of peripherals that are
missing definitions in QEMU and lead to kernel panics. These issues
almost certain rear their head for other methods of booting, but I was
unable to figure out a suitable HSS version that is recent enough to
support these peripherals & works with QEMU.
With these peripherals added, booting a kernel with the following hangs
hangs waiting for the system controller's hwrng, but the kernel no
longer panics. With the Linux driver for hwrng disabled, it boots to
console.
qemu-system-riscv64 -M microchip-icicle-kit \
-m 2G -smp 5 \
-kernel $(vmlinux_bin) \
-dtb $(dtb)\
-initrd $(initramfs) \
-display none -serial null \
-serial stdio
More peripherals are added than strictly required to fix the panics in
the hopes of avoiding a replication of this problem in the future.
Some of the peripherals which are in the device tree for recent kernels
are implemented in the FPGA fabric. The eMMC/SD mux, which exists as
an unimplemented device is replaced by a wider entry. This updated
entry covers both the mux & the remainder of the FPGA fabric connected
to the MSS using Fabric Interrconnect (FIC) 3.
Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220813135127.2971754-1-mail@conchuod.ie>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following patch updates opentitan to match the new configuration,
as per, lowRISC/opentitan@217a0168ba
Note: with this patch we now skip the usage of the opentitan
`boot_rom`. The Opentitan boot rom contains hw verification
for devies which we are currently not supporting in qemu. As of now,
the `boot_rom` has no major significance, however, would be good to
support in the future.
Tested by running utests from the latest tock [1]
(that supports this version of OT).
[1] https://github.com/tock/tock/pull/3056
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220613115810.178210-1-Jason@zx2c4.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The last_clk time was initialized at zero, this means when we calculate
the first delta we will calculate 0 vs current time which could cause
unnecessary hops.
This patch moves timer initialization to the cpu reset. There are two
resets registered here:
1. Per cpu timer mask (ttmr) reset.
2. Global cpu timer (last_clk and ttcr) reset, attached to the first
cpu only.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
This is mostly borrowed from xtensa and riscv as examples. The
create_pcie_irq_map swizzle function is almost and exact copy
but here we use a single cell interrupt, possibly we can make
this generic.
Signed-off-by: Stafford Horne <shorne@gmail.com>
This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This
platform allows for a convenient CI platform for toolchain, software
ports and the OpenRISC linux kernel port.
Much of this has been sourced from the m68k and riscv virt platforms.
The platform provides:
- OpenRISC SMP with up to 4 cpus
- A virtio bus with up to 8 devices
- Standard ns16550a serial
- Goldfish RTC
- SiFive TEST device for poweroff and reboot
- Generated Device Tree to automatically configure the guest kernel
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add a new property "big-endian" to allow configuring the RTC as either
little or big endian, the default is little endian.
Currently overriding the default to big endian is only used by the m68k
virt platform. New platforms should prefer to use little endian and not
set this.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
These will be shared with the virt platform.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The DMA engine is started by I/O access and then itself accesses the
I/O registers, triggering a reentrancy bug.
The following log can reveal it:
==5637==ERROR: AddressSanitizer: stack-overflow
#0 0x5595435f6078 in tulip_xmit_list_update qemu/hw/net/tulip.c:673
#1 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
#2 0x559544637f86 in memory_region_write_accessor qemu/softmmu/memory.c:492:5
#3 0x5595446379fa in access_with_adjusted_size qemu/softmmu/memory.c:554:18
#4 0x5595446372fa in memory_region_dispatch_write qemu/softmmu/memory.c
#5 0x55954468b74c in flatview_write_continue qemu/softmmu/physmem.c:2825:23
#6 0x559544683662 in flatview_write qemu/softmmu/physmem.c:2867:12
#7 0x5595446833f3 in address_space_write qemu/softmmu/physmem.c:2963:18
#8 0x5595435fb082 in dma_memory_rw_relaxed qemu/include/sysemu/dma.h:87:12
#9 0x5595435fb082 in dma_memory_rw qemu/include/sysemu/dma.h:130:12
#10 0x5595435fb082 in dma_memory_write qemu/include/sysemu/dma.h:171:12
#11 0x5595435fb082 in stl_le_dma qemu/include/sysemu/dma.h:272:1
#12 0x5595435fb082 in stl_le_pci_dma qemu/include/hw/pci/pci.h:910:1
#13 0x5595435fb082 in tulip_desc_write qemu/hw/net/tulip.c:101:9
#14 0x5595435f7e3d in tulip_xmit_list_update qemu/hw/net/tulip.c:706:9
#15 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
Fix this bug by restricting the DMA engine to memories regions.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It allows per-net client operations right after device's successful
start. In particular, to load the device status.
Vhost-vdpa net will use it to add the CVQ buffers to restore the device
status.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Used by the backend to perform actions after the device is stopped.
In particular, vdpa net use it to unmap CVQ buffers to the device,
cleaning the actions performed in prepare().
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is used by the backend to perform actions before the device is
started.
In particular, vdpa net use it to map CVQ buffers to the device, so it
can send control commands using them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since QEMU will be able to inject new elements on CVQ to restore the
state, we need not to depend on a VirtQueueElement to know if a new
element has been used by the device or not. Instead of check that, check
if there are new elements only using used idx on vhost_svq_flush.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
As discussed in previous series [1], this memory barrier is useless with
the atomic read of used idx at vhost_svq_more_used. Deleting it.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg02616.html
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since we're going to allow SVQ to add elements without the guest's
knowledge and without its own VirtQueueElement, it's easier to check if
an element is a valid head checking a different thing than the
VirtQueueElement.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It was easier to allow vhost_svq_add to handle the memory. Now that we
will allow qemu to add elements to a SVQ without the guest's knowledge,
it's better to handle it in the caller.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reduce code duplication.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can unbind twice a file descriptor if we call twice
vhost_svq_set_svq_kick_fd because of this. Since it comes from vhost and
not from SVQ, that file descriptor could be a different thing that
guest's vhost notifier.
Likewise, it can happens the same if a guest start and stop the device
multiple times.
Reported-by: Lei Yang <leiyang@redhat.com>
Fixes: dff4426fa6 ("vhost: Add Shadow VirtQueue kick forwarding capabilities")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Nothing actually reads the return value, but an error in cleaning some
entries could cause device stop to abort, making a restart impossible.
Better ignore explicitely the return value.
Reported-by: Lei Yang <leiyang@redhat.com>
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Although the device will be reset before usage, the right thing to do is
to clean it.
Reported-by: Lei Yang <leiyang@redhat.com>
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If a map fails for whatever reason, it must not be saved in the tree.
Otherwise, qemu will try to unmap it in cleanup, leaving to more errors.
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Next patch will skip the registering of dma maps that the vdpa device
rejects in the iova tree. We need to consider that here or we cause a
SIGSEGV accessing result.
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
=0uL/
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-08-31:
In the first 7.2 queue we have changes in the powernv pnv-phb handling,
the start of the QOMification of the ppc405 model, the removal of the
taihu machine, a new SLOF image and others.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYw/AFgAKCRA82cqW3gMx
# ZI6XAP0d8m6r1JqKXPSfCwVYy+AfrwY7oZWYbeTqdamK6xHcUQD+JyCcFcogY4Vz
# YwvHLd9W2cqvoWiZ4tmkK4Mb0Xt0Xg4=
# =0uL/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Aug 2022 16:09:58 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220831' of https://gitlab.com/danielhb/qemu: (60 commits)
ppc4xx: Fix code style problems reported by checkpatch
ppc/ppc4xx: Fix sdram trace events
hw/ppc/Kconfig: Move imply before select
hw/ppc/sam460ex: Remove PPC405 dependency from sam460ex
ppc405: Move machine specific code to ppc405_boards.c
ppc/ppc405: QOM'ify FPGA
ppc/ppc405: Use an explicit I2C object
hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device
ppc/ppc405: Use an embedded PPCUIC model in SoC state
ppc4xx: Rename ppc405-ebc to ppc4xx-ebc
ppc4xx: Move EBC model to ppc4xx_devs.c
ppc4xx: Rename ppc405-plb to ppc4xx-plb
ppc4xx: Move PLB model to ppc4xx_devs.c
ppc/ppc405: QOM'ify MAL
ppc/ppc405: QOM'ify PLB
ppc/ppc405: QOM'ify POB
ppc/ppc405: QOM'ify OPBA
ppc/ppc405: QOM'ify EBC
ppc/ppc405: QOM'ify DMA
ppc/ppc405: QOM'ify GPIO
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In scsi_req_parse_cdb(), if the CDB length implied by the command type
exceeds the initialized portion of the command buffer, reject the request.
Rejected requests are recorded by the `scsi_req_parse_bad` trace event.
On example of a bug detected by this check is SunOS's use of interleaved
DMA and non-DMA commands. This guest behavior currently causes QEMU to
parse uninitialized memory as a SCSI command, with unpredictable
outcomes.
With the new check in place:
* QEMU consistently creates a trace event and rejects the request.
* SunOS retries the request(s) and is able to successfully boot from
disk.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-2-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case scsi_req_new() will read uninitialized data, causing
unpredictable behavior.
Adds the buf_len parameter to scsi_req_new() and plumbs it through the
call stack.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-1-john@john-millikin.com>
[Fill in correct length for adapters other than ESP. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per investigation on the linked ticket, SunOS issues a SCSI bus reset
to the ESP as part of its boot sequence. If this ESP command doesn't
cause devices to assert sense flag UNIT ATTENTION, SunOS will consider
the CD-ROM device to be non-compliant with Common Command Set (CCS).
In this condition, the SunOS installer's early userspace doesn't set
the installation source location to sr0 and the miniroot copy fails.
Signed-off-by: John Millikin <john@john-millikin.com>
Suggested-by: Bill Paul <noisetube@gmail.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053846.699310-1-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In pegasos2 section move imply before select to match other sections.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <4d46dde64c2e5df6db3f92426fb3ae885939c2b0.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that shared PPC4xx devices are separated from PPC405 ones we can
drop this depencency.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <cf6c1d280f830beeea41128595c8c026d5126d2b.1660762465.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These are only used by the board code so move out from the shared SoC
model and put it in the boards file.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <2b23bcaaf191f96b217cbd06a6038694024862c3.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Having an explicit I2C model object will help if one day we want to
add I2C devices on the bus from the machine init routine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Symplify sysbus device casts for readibility]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <68eb8b5ac408ca8cc981ebf53a3e154c0d34c7f6.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Make ppc-uic a subclass of ppc4xx-dcr-device which will handle the cpu
link and make it uniform with the other PPC4xx devices.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <eb548130cf60aea8a6ea4dba4dee1686b3cabc3d.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <63d9b14c8ff5f73e35bffca1036394b5235735ee.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The EBC is shared between 405 and 440 so move it to shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <10eae70509ca4bd74858fc2c0a0f0e4eb9330199.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is shared between different 4xx socs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <5b13ebfd12a71a28035bed5a915cbeee81cf21d1.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The PLB is shared between 405 and 440 so move it to the shared file.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2498384bf3e18959ee8cb984d72fb66b8a6ecadc.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Memory Access Layer (MAL) controller is currently modeled as a DCR
device with 4 IRQs. Also drop the ppc4xx_mal_init() helper and adapt
the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes, add finalize method]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <d54a243dff94d95ba30dbcc09c27700a90ade932.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PLB is currently modeled as a simple DCR device. Also drop the
ppc4xx_plb_init() helper and adapt the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <c4256d1bffca86fe1d696aa9c56732e5f563e114.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POB is currently modeled as a simple DCR device.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <2bb1a89182523059ecb0e8d20c22a293534dec17.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The OPB arbitrer is currently modeled as a simple SysBus device with a
unique memory region.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <38476bc43d2332db2f09dbede9eff5234d6ce217.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
EBC is currently modeled as a DCR device. Also drop the ppc405_ebc_init()
helper and adapt the sam460ex machine.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <51a0769ab605c5158f4f2f1c896725d5fe7a073b.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The DMA controller is currently modeled as a DCR device with a couple
of IRQs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <4738b3c7cf18c328f05aaaddc555a46219431335.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The GPIO controller is currently modeled as a simple SysBus device
with a unique memory region.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Simplify sysbus device casts for readability]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <e95d7849f3768e1f9a2846c4b282392750678b3e.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The OCM controller is currently modeled as a simple DCR device with
a couple of memory regions.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <ecb93d2d5993bb7a970365744c7d342d4abcb017.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The GPT controller is currently modeled as a SysBus device with a
unique memory region, a couple of IRQs and a timer.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes, add finalize method]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <8950ab26e78173f94ba65bc61bcfd0631de1fe61.1660746880.git.balaton@eik.bme.hu>
[danielhb: check if timer != NULL in ppc405_gpt_finalize()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The CPC controller is currently modeled as a DCR device.
Now that all clock settings are handled at the CPC level, change the
SoC "sys-clk" property to be an alias on the same property in the CPC
model.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: ppc4xx_dcr_register changes]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <23393cb91a2c6c560a4461b3e9d1baa48ae28f74.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Device Control Registers (DCR) of on-SoC devices are accessed by
software through the use of the mtdcr and mfdcr instructions. These
are converted in transactions on a side band bus, the DCR bus, which
connects the on-SoC devices to the CPU.
Ideally, we should model these accesses with a DCR namespace and DCR
memory regions but today the DCR handlers are installed in a DCR table
under the CPU. Instead, introduce a little device model wrapper to hold
a CPU link and handle registration of DCR handlers.
The DCR device inherits from SysBus because most of these devices also
have MMIO regions and/or IRQs. Being a SysBusDevice makes things easier
to install the device model in the overall SoC.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Explicit opaque parameter for dcr callbacks]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9b21bdf55e0a728f093bad299e030d98f302ded0.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Drop the use of ppc4xx_init() and duplicate a bit of code related to
clocks in the SoC realize routine. We will clean that up in the
following patches.
ppc_dcr_init() simply allocates default DCR handlers for the CPU. Maybe
this could be done in model initializer of the CPU families needing it.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-8-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This moves all the code previously done in the ppc405ep_init() routine
under ppc405_soc_realize(). We can also adjust the number of banks now
that we have control on ppc4xx_sdram_init().
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-7-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is an initial model to start QOMification of the PPC405 board.
QOM'ified devices will be reintroduced one by one. Start with the
memory regions, which name prefix is changed to "ppc405".
Also, initialize only one RAM bank. The second bank is a dummy one
(zero size) which is here to match the hard coded number of banks in
ppc405ep_init().
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-6-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It doesn't belong to the generic machine nor the SoC. Fix a typo in
the name while we are at it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220809153904.485018-5-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We will use this machine as a base to define the ref405ep and possibly
the PPC405 hotfoot board as found in the Linux kernel.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220809153904.485018-3-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It has been deprecated since 7.0.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220809153904.485018-2-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
User creatable root ports are being parented by the 'peripheral' or the
'peripheral-anon' container. This happens because this is the regular
QOM schema for sysbus devices that are added via the command line.
Let's make this QOM hierarchy similar to what we have with default root
ports, i.e. the root port must be parented by the pnv-root-bus. To do
that we change the qom and bus parent of the root port during
root_port_realize(). The realize() is shared by the default root port
code path, so we can remove the code inside pnv_phb_attach_root_port()
that was adding the root port as a child of the bus as well.
After all that, remove pnv_phb_attach_root_port() and create the root
port explictly in the 'default_enabled()' case of pnv_phb_realize().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220819094748.400578-3-danielhb413@gmail.com>
We have 2 helpers that amends the QOM and parent bus of a given object,
repectively. These 2 helpers are called together, and not by accident.
Due to QOM internals, doing an object_unparent() will result in the
device being removed from its parent bus. This means that changing the
QOM parent requires reassigning the parent bus again.
Create a single helper called pnv_parent_fixup(), documenting some of
the QOM specifics that we're dealing with the unparenting/parenting
mechanics, and handle both the QOM and the parent bus assignment.
Next patch will make use of this function to handle a case where we need
to change the QOM parent while keeping the same parent bus assigned
beforehand.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220819094748.400578-2-danielhb413@gmail.com>
Given that powernv9 and powernv10 uses the same pnv-phb backend, the
logic to allow user created pnv-phbs for powernv10 is already in place.
Let's flip the switch.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-11-danielhb413@gmail.com>
The function assumes that we're always dealing with a PNV9_CHIP()
object. This is not the case when the pnv-phb device belongs to a
powernv10 machine.
Change pnv_phb4_get_pec() to be able to work with PNV10_CHIP() if
necessary.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-10-danielhb413@gmail.com>
Enable pnv-phb user created devices for powernv9 now that we have
everything in place.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-9-danielhb413@gmail.com>
The PHB4 backend relies on a link with the corresponding PEC element.
This is trivial to do during machine_init() time for default devices,
but not so much for user created ones.
pnv_phb4_get_pec() is a small variation of the function that was
reverted by commit 9c10d86fee "ppc/pnv: Remove user-created PHB{3,4,5}
devices". We'll use it to determine the appropriate PEC for a given user
created pnv-phb that uses a PHB4 backend.
This is done during realize() time, in pnv_phb_user_device_init().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-8-danielhb413@gmail.com>
The bulk of the work was already done by previous patches.
Use defaults_enabled() to determine whether we need to create the
default devices or not.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-7-danielhb413@gmail.com>
When enabling user created PHBs (a change reverted by commit 9c10d86fee)
we were handling PHBs created by default versus by the user in different
manners. The only difference between these PHBs is that one will have a
valid phb3->chip that is assigned during pnv_chip_power8_realize(),
while the user created needs to search which chip it belongs to.
Aside from that there shouldn't be any difference. Making the default
PHBs behave in line with the user created ones will make it easier to
re-introduce them later on. It will also make the code easier to follow
since we are dealing with them in equal manner.
The first step is to turn chip8->phbs[] into a PnvPHB3 pointer array.
This will allow us to assign user created PHBs into it later on. The way
we initilize the default case is now more in line with that would happen
with the user created case: the object is created, parented by the chip
because pnv_xscom_dt() relies on it, and then assigned to the array.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-6-danielhb413@gmail.com>
pnv_parent_qom_fixup() and pnv_parent_bus_fixup() are versions of the
helpers that were reverted by commit 9c10d86fee "ppc/pnv: Remove
user-created PHB{3,4,5} devices". They are needed to amend the QOM and
bus hierarchies of user created pnv-phbs, matching them with default
pnv-phbs.
A new helper pnv_phb_user_device_init() is created to handle
user-created devices setup. We're going to call it inside
pnv_phb_realize() in case we're realizing an user created device. This
will centralize all user device realated in a single spot, leaving the
realize functions of the phb3/phb4 backends untouched.
Another helper called pnv_chip_add_phb() was added to handle the
particularities of each chip version when adding a new PHB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-5-danielhb413@gmail.com>
For default root ports we have a way of accessing chassis and slot,
before root_port_realize(), via pnv_phb_attach_root_port(). For the
future user created root ports this won't be the case: we can't use
this helper because we don't have access to the PHB phb-id/chip-id
values.
In earlier patches we've added phb-id and chip-id to pnv-phb-root-bus
objects. We're now able to use the bus to retrieve them. The bus is
reachable for both user created and default devices, so we're changing
all the code paths. This also allow us to validate these changes with
the existing default devices.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-4-danielhb413@gmail.com>
The same rationale provided in the PHB3 bus case applies here.
Note: we could have merged both buses in a single object, like we did
with the root ports, and spare some boilerplate. The reason we opted to
preserve both buses objects is twofold:
- there's not user side advantage in doing so. Unifying the root ports
presents a clear user QOL change when we enable user created devices back.
The buses objects, aside from having a different QOM name, is transparent
to the user;
- we leave a door opened in case we want to increase the root port limit
for phb4/5 later on without having to deal with phb3 code.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-3-danielhb413@gmail.com>
We rely on the phb-id and chip-id, which are PHB properties, to assign
chassis and slot to the root port. For default devices this is no big
deal: the root port is being created under pnv_phb_realize() and the
values are being passed on via the 'index' and 'chip-id' of the
pnv_phb_attach_root_port() helper.
If we want to implement user created root ports we have a problem. The
user created root port will not be aware of which PHB it belongs to,
unless we're willing to violate QOM best practices and access the PHB
via dev->parent_bus->parent. What we can do is to access the root bus
parent bus.
Since we're already assigning the root port as QOM child of the bus, and
the bus is initiated using PHB properties, let's add phb-id and chip-id
as properties of the bus. This will allow us trivial access to them, for
both user-created and default root ports, without doing anything too
shady with QOM.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220811163950.578927-2-danielhb413@gmail.com>
The helper is only used in this file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-13-danielhb413@gmail.com>
The attribute is unused.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-11-danielhb413@gmail.com>
We support only a single root port, PNV_PHB_ROOT_PORT.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-10-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used instead. The phb4-root-port
device isn't exposed to the user in any official QEMU release so there's
no ABI breakage in removing it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-9-danielhb413@gmail.com>
The unified pnv-phb-root-port can be used in its place. There is no ABI
breakage in doing so because no official QEMU release introduced user
creatable pnv-phb3-root-port devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-8-danielhb413@gmail.com>
We have two very similar root-port devices, pnv-phb3-root-port and
pnv-phb4-root-port. Both consist of a wrapper around the PCIESlot device
that, until now, has no additional attributes.
The main difference between the PHB3 and PHB4 root ports is that
pnv-phb4-root-port has the pnv_phb4_root_port_reset() callback. All
other differences can be merged in a single device without too much
trouble.
This patch introduces the unified pnv-phb-root-port that, in time, will
be used as the default root port for the pnv-phb device.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-7-danielhb413@gmail.com>
Change the parent type of the PnvPHB4 device to TYPE_PARENT since the
PCI bus is going to be initialized by the PnvPHB parent. Functions that
needs to access the bus via a PnvPHB4 object can do so via the
phb4->phb_base pointer.
pnv_phb4_pec now creates a PnvPHB object.
The powernv9 machine class will create PnvPHB devices with version '4'.
powernv10 will create using version '5'. Both are using global machine
properties in their class_init() to do that.
These changes will benefit us when adding PnvPHB user creatable devices
for powernv9 and powernv10.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-6-danielhb413@gmail.com>
Similar to what we already did for the PnvPHB3 device, let's add a
helper to init the bus when using a PnvPHB4. This helper will be used by
PnvPHb when PnvPHB4 turns into a backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-5-danielhb413@gmail.com>
We need a handful of changes that needs to be done in a single swoop to
turn PnvPHB3 into a PnvPHB backend.
In the PnvPHB3, since the PnvPHB device implements PCIExpressHost and
will hold the PCI bus, change PnvPHB3 parent to TYPE_DEVICE. There are a
couple of instances in pnv_phb3.c that needs to access the PCI bus, so a
phb_base pointer is added to allow access to the parent PnvPHB. The
PnvPHB3 root port will now be connected to a PnvPHB object.
In pnv.c, the powernv8 machine chip8 will now hold an array of PnvPHB
objects. pnv_get_phb3_child() needs to be adapted to return the PnvPHB3
backend from the PnvPHB child. A global property is added in
pnv_machine_power8_class_init() to ensure that all PnvPHBs are created
with phb->version = 3.
After all these changes we're still able to boot a powernv8 machine with
default settings. The real gain will come with user created PnvPHB
devices, coming up next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-4-danielhb413@gmail.com>
The PnvPHB device is going to be the base device for all other powernv
PHBs. It consists of a device that has the same user API as the other
PHB, namely being a PCIHostBridge and having chip-id and index
properties. It also has a 'backend' pointer that will be initialized
with the PHB implementation that the device is going to use.
The initialization of the PHB backend is done by checking the PHB
version via a 'version' attribute that can be set via a global machine
property. The 'version' field will be used to make adjustments based on
the running version, e.g. PHB3 uses a 'chip' reference while PHB4 uses
'pec'. To init the PnvPHB bus we'll rely on helpers for each version.
The version 3 helper is already added (pnv_phb3_bus_init), the PHB4
helper will be added later on.
For now let's add the basic logic of the PnvPHB object, which consists
mostly of pnv_phb_realize() doing all the work of checking the
phb->version set, initializing the proper backend, passing through its
attributes to the chosen backend, finalizing the backend realize and
adding a root port in the end.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-3-danielhb413@gmail.com>
The PnvPHB3 bus init consists of initializing the pci_io and pci_mmio
regions, registering it via pci_register_root_bus() and then setup the
iommu.
We'll want to init the bus from outside pnv_phb3.c when the bus is
removed from the PnvPHB3 device and put into a new parent PnvPHB device.
The new pnv_phb3_bus_init() helper will be used by the parent to init
the bus when using the PHB3 backend.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220624084921.399219-2-danielhb413@gmail.com>
The SBE (Self Boot Engine) are on-chip microcontrollers that perform
early boot steps, as well as provide some runtime facilities (e.g.,
timer, secure register access, MPIPL). The latter facilities are
accessed mostly via a message system called SBEFIFO.
This driver provides initial emulation for the SBE runtime registers
and a very basic SBEFIFO implementation that provides the timer
command. This covers the basic SBE behaviour expected by skiboot when
booting.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220811093726.1442343-1-npiggin@gmail.com>
[danielhb: fixed SBE_HOST_RESPONSE_MASK long line]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc_cpu_compare_class_pvr_mask() should match the best CPU class in the
family, because it is used by the KVM subsystem to find the host CPU
class. Since commit 03ae4133ab ("target-ppc: Add pvr_match()
callback"), it matches any class in the family (the first one in the
comparison list).
Since commit f30c843ced ("ppc/pnv: Introduce PowerNV machines with
fixed CPU models"), pnv has relied on pnv_match having these new
semantics to check machine compatibility with a CPU family.
Resolve this by adding a parameter to the pvr_match function to select
the best or any match, and restore the old behaviour for the KVM case.
Prior to this fix, e.g., a POWER9 DD2.3 KVM host matches to the
power9_v1.0 class (because that happens to be the first POWER9 family
CPU compared). After the patch, it matches the power9_v2.0 class.
This approach requires pnv_match contain knowledge of the CPU classes
implemented in the same family, which feels ugly. But pushing the 'best'
match down to the class would still require they know about one another
which is not obviously much better. For now this gets things working.
Fixes: 03ae4133ab ("target-ppc: Add pvr_match() callback")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220731013358.170187-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add stfle 197 (processor-activity-instrumentation extension 1) to the
gen16 default model and fence it off for 7.1 and older.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220727135120.12784-1-borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commits 01ef8185b8 amd 24b36e9813 updated the way that the maximum
transfer length is calculated for patching block limits VPD page in an
INQUIRY response.
The same updates also need to be made for the case where the host device
does not support the block limits VPD page at all and we emulate the
whole page.
Without this fix, on host block devices a maximum transfer length of
(INT_MAX - sector_size) bytes is advertised to the guest, resulting in
I/O errors when a request that exceeds the host limits is made by the
guest. (Prior to commit 24b36e9813, this code path would use the
max_transfer value from the host instead of INT_MAX, but still miss the
fix from 01ef8185b8 where max_transfer is also capped to max_iov
host pages, so it would be less wrong, but still wrong.)
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2096251
Fixes: 01ef8185b8
Fixes: 24b36e9813
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220822125320.48257-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio level reset should not affect pci express
registers such as PM, error or link.
Fixes: 27ce0f3afc ("hw/virtio: fix Power Management Control Register for PCI Express virtio devices")
Fixes: d584f1b9ca ("hw/virtio: fix Link Control Register for PCI Express virtio devices")
Fixes: c2cabb3422 ("hw/virtio: fix error enabling flags in Device Control register")
Cc: "Marcel Apfelbaum" <marcel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A placeholder of ~0 is used to indicate variable payload size.
Whilst the checks for output payload correctly took this into
account, those for input payload did not.
This results in failure of the Set LSA command.
Fixes: 464e14ac43 ("hw/cxl/device: Implement basic mailbox (8.2.8.4)")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220817145759.32603-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no checking on the availability of a write callback.
Hence QEMU crashes if a write does occur to one of these regions.
Discovered whilst chasing a Linux kernel bug that incorrectly
wrote into one of these regions.
Fixes: 6364adacdf ("hw/cxl/device: Implement the CAP array (8.2.8.1-2)")
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220817145759.32603-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Two issues were present in this code:
1) Check on which register to look in was inverted.
2) Both branches use the _LO register.
Whilst here moved to extract32() rather than hand rolling
the field extraction as simpler and hopefully less error prone.
Fixes Coverity CID: 1488873
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220808122051.14822-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use g_autofree to free the CXLFixedWindow structure if an
error occurs in configuration before we have added to
the list (via g_steal_pointer())
Fix Coverity CID: 1488872
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220808122051.14822-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Causes regressions when doing direct kernel boots with OVMF.
At this point in the release cycle the only sensible action
is to just disable this for 7.1 and sort it properly in the
7.2 devel cycle.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220817083940.3174933-1-kraxel@redhat.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As reads happen in the callback we were never seeing them. We only
really care about the header so move the tracepoint to when the header
is complete.
Fixes: 6ca6d8ee9d (hw/virtio: add vhost_user_[read|write] trace points)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220728135503.1060062-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The assert() protecting against leakage is a little aggressive and
causes needless crashes if a device is shutdown without having been
configured. In this case no descriptors are lost because none have
been assigned.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220728135503.1060062-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I've noticed asserts firing because we query the status of vdev after
a vhost connection is closed down. Rather than faulting on the NULL
indirect just quietly reply false.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220728135503.1060062-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As soon as virtio_scsi_data_plane_start() attaches host notifiers the
IOThread may start virtqueue processing. There is a race between
IOThread virtqueue processing and virtio_scsi_data_plane_start() because
it only assigns s->dataplane_started after attaching host notifiers.
When a virtqueue handler function in the IOThread calls
virtio_scsi_defer_to_dataplane() it may see !s->dataplane_started and
attempt to start dataplane even though we're already in the IOThread:
#0 0x00007f67b360857c __pthread_kill_implementation (libc.so.6 + 0xa257c)
#1 0x00007f67b35bbd56 raise (libc.so.6 + 0x55d56)
#2 0x00007f67b358e833 abort (libc.so.6 + 0x28833)
#3 0x00007f67b358e75b __assert_fail_base.cold (libc.so.6 + 0x2875b)
#4 0x00007f67b35b4cd6 __assert_fail (libc.so.6 + 0x4ecd6)
#5 0x000055ca87fd411b memory_region_transaction_commit (qemu-kvm + 0x67511b)
#6 0x000055ca87e17811 virtio_pci_ioeventfd_assign (qemu-kvm + 0x4b8811)
#7 0x000055ca87e14836 virtio_bus_set_host_notifier (qemu-kvm + 0x4b5836)
#8 0x000055ca87f8e14e virtio_scsi_set_host_notifier (qemu-kvm + 0x62f14e)
#9 0x000055ca87f8dd62 virtio_scsi_dataplane_start (qemu-kvm + 0x62ed62)
#10 0x000055ca87e14610 virtio_bus_start_ioeventfd (qemu-kvm + 0x4b5610)
#11 0x000055ca87f8c29a virtio_scsi_handle_ctrl (qemu-kvm + 0x62d29a)
#12 0x000055ca87fa5902 virtio_queue_host_notifier_read (qemu-kvm + 0x646902)
#13 0x000055ca882c099e aio_dispatch_handler (qemu-kvm + 0x96199e)
#14 0x000055ca882c1761 aio_poll (qemu-kvm + 0x962761)
#15 0x000055ca880e1052 iothread_run (qemu-kvm + 0x782052)
#16 0x000055ca882c562a qemu_thread_start (qemu-kvm + 0x96662a)
This patch assigns s->dataplane_started before attaching host notifiers
so that virtqueue handler functions that run in the IOThread before
virtio_scsi_data_plane_start() returns correctly identify that dataplane
does not need to be started. This fix is taken from the virtio-blk
dataplane code and it's worth adding a comment in virtio-blk as well to
explain why it works.
Note that s->dataplane_started does not need the AioContext lock because
it is set before attaching host notifiers and cleared after detaching
host notifiers. In other words, the IOThread always sees the value true
and the main loop thread does not modify it while the IOThread is
active.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2099541
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220808162134.240405-1-stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The loop condition in xhci_ring_chain_length() is under control of
the guest, and additionally the code does not check for failed DMA
transfers (e.g. if reaching the end of the RAM), so the loop there
could run for a very long time or even forever. Fix it by checking
the return value of dma_memory_read() and by introducing a maximum
loop length.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/646
Message-Id: <20220804131300.96368-1-thuth@redhat.com>
Reviewed-by: Mauro Matteo Cascella <mcascell@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the introduction of the new TCG GICv4, build_madt() is badly broken
as we do not present any GIC Redistributor structure in MADT for GICv4
guests, so that they have no idea about where the Redistributor
register frames are. This fixes a Linux guest crash at boot time with
ACPI enabled and '-machine gic-version=4'.
While at it, let's convert the remaining hard coded gic_version into
enumeration VIRT_GIC_VERSION_2 for consistency.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220812022018.1069-1-yuzenghui@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In rocker_port_phys_link_status() and rocker_port_phys_enable_read()
we construct a 64-bit value with one bit per front-panel port.
However we accidentally do the shift as 32-bit arithmetic, which
means that if there are more than 31 front-panel ports this is
undefined behaviour.
Fix the problem by ensuring we use 64-bit arithmetic for the whole
calculation. (We won't ever shift off the 64-bit value because
ROCKER_FP_PORTS_MAX is 62.)
Resolves: Coverity CID 1487121, 1487160
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In real hardware, the APB and AHB PNP data tables can be accessed
with byte and halfword reads as well as word reads. Our
implementation currently only handles word reads. Add support for
the 8 and 16 bit accesses. Note that we only need to handle aligned
accesses -- unaligned accesses should continue to trap, as happens on
hardware.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1132
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Message-Id: <20220802131925.3380923-1-peter.maydell@linaro.org>
Tested-by: Tomasz Martyniak <gitlab.com/tom4r>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
QEMU crashes trying to save VMSTATE when only MIPS target are compiled in
$ qemu-system-mips -monitor stdio
(qemu) migrate "exec:gzip -c > STATEFILE.gz"
Segmentation fault (core dumped)
It happens due to PIIX4_PM trying to parse hotplug vmstate structures
which are valid only for x86 and not for MIPS (as it requires ACPI
tables support which is not existent for ithe later)
Issue was probably exposed by trying to cleanup/compile out unused
ACPI bits from MIPS target (but forgetting about migration bits).
Disable compiled out features using compat properties as the least
risky way to deal with issue.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/995
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220728115034.1327988-1-imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
In xlnx_dp_aux_set_command, when the command leads to the default
branch, xlxn-dp will abort and then crash.
This patch removes this abort and drops this operation.
Fixes: 58ac482 ("introduce xlnx-dp")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/411
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Message-Id: <20220808080116.2184881-1-cyruscyliu@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a compiler warning on openbsd:
../src/hw/loongarch/acpi-build.c:416:12: warning: variable 'aml_len'
set but not used [-Wunused-but-set-variable]
size_t aml_len = 0;
^
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220721040046.3985609-1-gaosong@loongson.cn>
[rth: Removing aml_len in turn makes fadt set but not used.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're not storing all GPIO lines we're retrieving with
qdev_get_gpio_in() in mal_irqs[]. We're storing just the last one in the
first index:
for (i = 0; i < ARRAY_SIZE(mal_irqs); i++) {
mal_irqs[0] = qdev_get_gpio_in(uic[2], 3 + i);
}
ppc4xx_mal_init(env, 4, 16, mal_irqs);
mal_irqs is used in ppc4xx_mal_init() to assign the IRQs to MAL:
for (i = 0; i < 4; i++) {
mal->irqs[i] = irqs[i];
}
Since only irqs[0] has been initialized, mal->irqs[1,2,3] are being
zeroed.
This doesn´t seem to trigger any apparent issues at this moment, but
Cedric's QOMification of the MAL device [1] is executing a
sysbus_connect_irq() that will fail if we do not store all GPIO lines
properly.
[1] https://lists.gnu.org/archive/html/qemu-devel/2022-08/msg00497.html
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Fixes: 706e944206 ("hw/ppc/sam460ex: Drop use of ppcuic_init()")
Acked-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220803233204.2724202-1-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For small disk images (<4 GiB), QEMU and SeaBIOS default to the
LARGE/ECHS disk translation method, but it is not uncommon for other
BIOS software to use LBA in these cases as well. Some operating
system boot loaders (e.g., NT 4) do not handle LARGE translations
outside of fixed configurations. See, e.g., Q154052:
"When starting an x86 based computer, Ntdetect.com retrieves and
stores Interrupt 13 information. . . If the disk controller is using a
32 sector/64 head translation scheme, this boundary will be 1 GB. If
the controller uses 63 sector/255 head translation [AUTHOR: i.e.,
LBA], the limit will be 4 GB."
To accommodate these situations, hd_geometry_guess() now follows the
disk translation specified by the user even when the ATA disk geometry
is guessed.
hd_geometry_guess():
* Only set the disk translation when translation is AUTO.
* Show the soon-to-be active translation (*ptrans) in the trace rather
than what was guessed.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/56
Buglink: https://bugs.launchpad.net/qemu/+bug/1745312
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707204045.999544-1-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Fix ownership of RAM regions on the fby35 machine
-----BEGIN PGP SIGNATURE-----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=hAJg
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20220801' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fix ownership of RAM regions on the fby35 machine
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmLn1N8ACgkQUaNDx8/7
# 7KHaVA//eh5wIZKeg1Qit8dhVoPXcO7b97KFpBreyCkfdREJpoLjoFe4y+rnKhnL
# tJm6qx1YG5s0UN/ODcy4TyKV9CkpcjsRZ+BHuZ+jjiz3WzuarZUTbZx1jVSJP6z0
# xcXc3CucKe/yyidGV1gKGiWetuXv2F6nYHzfvJ4auei6Rga8rwmiN7Rqf3Qfh6Lw
# Islj/9axfLxGzuMV85uuRZdRrrlmTOjDgnF4mxwVXRrxjtLIaAbzKT6mc1p1FUry
# cuE7bDjbZoT7ftBn5y4gQXV38M3XcWzB1KvzMslldkccU7cTbJg8620KSNiscOkJ
# 03xEJiBJoAzy/X1PUmEODNYUV8a19xcsXEyqaRQiyYtO1XMBDcNkSaiaFacOnhFT
# UxabJf3qvzf1QwAmgxGUdbR5usNXsr8Yrnpf1lew7Mvr3SwOYVXqb/JPp+j7uoV3
# CVvvTFZm+hBQghaHC0wHBX+C3aLsTis4Jppn5loulo6fb9KZiosj2kPRwEIetVkt
# ZgkBOLWRWtizdWKM7HImt7F+v/r7ClFlwAIJj8QQV0HTtVZ+gM6MXWj5oczKENJ8
# vPkoP6AUoOWzKFEhBU5XtQ9DdwPSP9m6zAZXl4LD17tVPUPpsuSEDaxhH5hAEnIR
# 39Mgx7hoK0uLHhM02RrNodD/NDmrZCPV3PwZ979z0Q/C8dttRkY=
# =hAJg
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Aug 2022 06:27:59 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20220801' of https://github.com/legoater/qemu:
aspeed/fby35: Fix owner of the BMC RAM memory region
aspeed: Remove unused fields from AspeedMachineState
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Improve wordings in some files
-----BEGIN PGP SIGNATURE-----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=K6RW
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-08-01' of https://gitlab.com/thuth/qemu into staging
- Some fixes for various tests
- Improve wordings in some files
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmLn6aYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWekg/+NVIT1jp3tcbfPIE6pB0vI/AhqN3i2hUd
# zfJ4V3rSe5tg54JpmuuSt542mp4BDM9bPfYcY/DYESWEtW0c9wv80iP/5LFdJF0G
# GYtk7Q4pRXvB32kF0v9OxjCEGPUeEqSRrDrsI/Ify5evEIhr55oHPnDjN/US1Bx+
# TIuVfmyz8jhSPHsUvZzfVyFxkHre1+BWDxgM3zxoHFIaWEscIPE1KhwRILbKIxWx
# MHpL8JLAneGFwljQoUAMCl7GzHkVna59RhqkbBJ+8iTaNGipQj9FhHZBo2CulO0J
# SR7scWowYN8Jt2FNMe3tcKM2xQn/2Fg2TEK4sp6q+hCXhJuvFfWFHBiFYTNpagFA
# LGgZmPfDr4uZtMEqY4AdEZdL14YZcoM9E/RpW7GhSvMHy73wOj16O8luH1bU0jtG
# 6X1VvAZlw8/Son1Tbq2CC6WejlMfJFXSzF6Fy6M7SflMPW44vJOs5uKdW405MYjE
# Pksbfz1rwoNfK+1qBNQop7SccgDRvPtlLf3lDAU9V/JHWVEITs1KTfyS+46U8jKA
# 9SVBzKuTpVd+aXvMgvMAmmqnyvUBPHJ9KcFq4vHNbIETsGaQsXu0Q6waBmpcK8YB
# KUL/g0EsdfhkpVVgKYZ4Bzj7shG6SKTdwc/lUcOt+wQuDrZZzaC+A2cu/6ReQN6T
# BIHtoaxTz8E=
# =K6RW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Aug 2022 07:56:38 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-08-01' of https://gitlab.com/thuth/qemu:
tests/qtest/migration-test: Run the dirty ring tests only with the x86 target
trivial: Fix duplicated words
misc: fix commonly doubled up words
tests/unit/test-qga: Replace the word 'blacklist' in the guest agent unit test
migration-test: Allow test to run without uffd
migration-test: Use migrate_ensure_converge() for auto-converge
tests/tcg/linux-test: Fix random hangs in test_socket
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A MachineState object is used as a owner of the RAM region and this
asserts in memory_region_init_ram() when QEMU is built with
CONFIG_QOM_CAST_DEBUG :
/* This will assert if owner is neither NULL nor a DeviceState.
* We only want the owner here for the purposes of defining a
* unique name for migration. TODO: Ideally we should implement
* a naming scheme for Objects which are not DeviceStates, in
* which case we can relax this restriction.
*/
owner_dev = DEVICE(owner);
Use the BMC and BIC objects as the owners of their memory regions.
Cc: Peter Delevoryas <peter@pjd.dev>
Fixes: 778e14cc5c ("aspeed: Add AST2600 (BMC) to fby35")
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Message-Id: <20220727102714.803041-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fixes: 346160cbf2 ("aspeed: Set the dram container at the SoC level")
Message-Id: <20220727102714.803041-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The existing code assumes that the block size can be generated from p[1] << 8
in multiple places which ignores the top and bottom 8 bits. If the block size
is allowed to be set to an arbitrary value then this causes a mismatch
between the value written by the guest in the block descriptor and the value
subsequently read back using READ CAPACITY causing the guest to generate
requests that can crash QEMU.
For now restrict block size changes to bits 8-15 and also ignore requests to
set the block size to 0 which causes the SCSI emulation to crash in at least
one place with a divide by zero error.
Fixes: 356c4c441e ("scsi-disk: allow MODE SELECT block descriptor to set the block size")
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1112
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In scsi_disk_emulate_write_same() the number of host sectors to transfer is
calculated as (s->qdev.blocksize / BDRV_SECTOR_SIZE) which is then used to
copy data in block size chunks to the iov buffer.
Since the loop copying the data to the iov buffer uses a fixed increment of
s->qdev.blocksize then using a block size that isn't a multiple of
BDRV_SECTOR_SIZE introduces a rounding error in the iov buffer size calculation
such that the iov buffer copy overflows the space allocated.
Update the iov buffer copy for() loop so that it will use the smallest of either
the current block size or the remaining transfer count to prevent the overflow.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In one case:
memcpy(sid->inmsg + sid->inlen, buf, len);
if len == 0 then sid->inmsg + sig->inlen can point to one past the inmsg
array if the array is full. We have to allow len == 0 due to some
vagueness in the spec, but we don't have to call memcpy.
Found by Coverity. This is not a problem in practice, but the results
are technically (maybe) undefined. So make Coverity happy.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Do not enable ioeventfd by default. Let the feature mature a bit before
we consider enabling it by default.
Fixes: 2e53b0b450 ("hw/nvme: Use ioeventfd to handle doorbell updates")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Make sure the notifier handler is unregistered in the main loop prior to
cleaning it up.
Fixes: 2e53b0b450 ("hw/nvme: Use ioeventfd to handle doorbell updates")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
While it is safe to process the queues when they are empty, skip it if
the event notifier callback was invoked spuriously.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jinhao Fan <fanjinhao21s@ict.ac.cn>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Some files wrongly contain the same word twice in a row.
One of them should be removed or replaced.
Message-Id: <20220722145859.1952732-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Change macro name 'LS7A_XXX' to 'VIRT_XXX', as the loongarch
virt machinue use the GPEX bridge instead of LS7A bridge. So
the macro name should keep consistency.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220729073018.27037-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1. Rename 'loongson3.c' to 'virt.c' and change the meson.build file.
2. Rename 'loongson3.rst' to 'virt.rst'.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220729073018.27037-2-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Short queue with 2 Coverity fixes and one fix of the
'wait' insns that is causing hangs if the guest kernel uses
the most up to date wait opcode.
- target/ppc:
- implement new wait variants to fix guest hang when using the new opcode
- ppc440_uc: initialize length passed to cpu_physical_memory_map()
- spapr_nvdimm: check if spapr_drc_index() returns NULL
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYuK8VgAKCRA82cqW3gMx
ZOc7AQDPMsFY9NHNqJ3O0MiX4Qoy8IGUreZ9dzZSS3zT1nxtEAD+Lwl0/aGO+dk+
+NiIO80A5Agy/0g8PHie4qR3EqHEnwA=
=Q4eR
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220728' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-07-28:
Short queue with 2 Coverity fixes and one fix of the
'wait' insns that is causing hangs if the guest kernel uses
the most up to date wait opcode.
- target/ppc:
- implement new wait variants to fix guest hang when using the new opcode
- ppc440_uc: initialize length passed to cpu_physical_memory_map()
- spapr_nvdimm: check if spapr_drc_index() returns NULL
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYuK8VgAKCRA82cqW3gMx
# ZOc7AQDPMsFY9NHNqJ3O0MiX4Qoy8IGUreZ9dzZSS3zT1nxtEAD+Lwl0/aGO+dk+
# +NiIO80A5Agy/0g8PHie4qR3EqHEnwA=
# =Q4eR
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Jul 2022 09:41:58 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220728' of https://gitlab.com/danielhb/qemu:
target/ppc: Implement new wait variants
hw/ppc/ppc440_uc: Initialize length passed to cpu_physical_memory_map()
hw/ppc: check if spapr_drc_index() returns NULL in spapr_nvdimm.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When in CGA modes, QEMU wants to ignore the maximum scan field (bits 0..4) of
the maximum scan length register in the CRTC. It is not clear why this is
needed---for example, Bochs ignores bit 7 instead. The issue is that the
CGA modes are not detected correctly, and in particular mode 6 results in
multi_scan==3 according to how SeaBIOS programs it. The right way to check
for CGA graphics modes is to check whether bit 13 of the address is special
cased by the CRT controller to achieve line interleaving, i.e. whether bit 0
of the CRTC mode control register is clear.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1020
Reported-by: Korneliusz Osmenda <korneliuszo@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In dcr_write_dma(), there is code that uses cpu_physical_memory_map()
to implement a DMA transfer. That function takes a 'plen' argument,
which points to a hwaddr which is used for both input and output: the
caller must set it to the size of the range it wants to map, and on
return it is updated to the actual length mapped. The dcr_write_dma()
code fails to initialize rlen and wlen, so will end up mapping an
unpredictable amount of memory.
Initialize the length values correctly, and check that we managed to
map the entire range before using the fast-path memmove().
This was spotted by Coverity, which points out that we never
initialized the variables before using them.
Fixes: Coverity CID 1487137, 1487150
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220726182341.1888115-2-peter.maydell@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
spapr_nvdimm_flush_completion_cb() and flush_worker_cb() are using the
DRC object returned by spapr_drc_index() without checking it for NULL.
In this case we would be dereferencing a NULL pointer when doing
SPAPR_NVDIMM(drc->dev) and PC_DIMM(drc->dev).
This can happen if, during a scm_flush(), the DRC object is wrongly
freed/released (e.g. a bug in another part of the code).
spapr_drc_index() would then return NULL in the callbacks.
Fixes: Coverity CID 1487108, 1487178
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220409200856.283076-2-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since commit 40244040a7, multi-socket configuration with plic is
broken as the hartid for second socket is calculated incorrectly.
The hartid stored in addr_config already includes the offset
for the base hartid for that socket. Adding it again would lead
to segfault while creating the plic device for the virt machine.
qdev_connect_gpio_out was also invoked with incorrect number of gpio
lines.
Fixes: 40244040a7 (hw/intc: sifive_plic: Avoid overflowing the addr_config buffer)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220723090335.671105-1-atishp@rivosinc.com>
[ Changes by AF:
- Change the qdev_connect_gpio_out() numbering
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Several fixes. From now on, regression fixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmLgQr8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGUUIAKtNhrnKopGm4LlRpx8zN3Jc1Jo0nb648gaM
Oyi+Pl8+hpESUhaWN10XDk38/QuPQfIFeR2ZhfYjFTRlZE+n3X9LVlwL8ejjP8KH
AcWm78Ff/SLA45aMKMmw74pvEDNsoPYTp7TrfeIej5ub8BIXr8+8pqDdIR9WwtWO
PbhLNXkTT2yLEs6jCVT4/dyh7zivSkrY7G/RVmtUaFe3PgY8fdW2z3+Txz7UIMgw
CQoGuAucCO5ToBbs2CbT0V5yxY6G5VO6Qd8g0PzDW4M6GsY/Xr5QCnyJe0jTW0d6
Dcc7UZFAzGNzyQCxHCic9xwTO+ZcJPJlH5TwknunxOb9xwCx4Qs=
=zN41
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,virtio: fixes
Several fixes. From now on, regression fixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmLgQr8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpGUUIAKtNhrnKopGm4LlRpx8zN3Jc1Jo0nb648gaM
# Oyi+Pl8+hpESUhaWN10XDk38/QuPQfIFeR2ZhfYjFTRlZE+n3X9LVlwL8ejjP8KH
# AcWm78Ff/SLA45aMKMmw74pvEDNsoPYTp7TrfeIej5ub8BIXr8+8pqDdIR9WwtWO
# PbhLNXkTT2yLEs6jCVT4/dyh7zivSkrY7G/RVmtUaFe3PgY8fdW2z3+Txz7UIMgw
# CQoGuAucCO5ToBbs2CbT0V5yxY6G5VO6Qd8g0PzDW4M6GsY/Xr5QCnyJe0jTW0d6
# Dcc7UZFAzGNzyQCxHCic9xwTO+ZcJPJlH5TwknunxOb9xwCx4Qs=
# =zN41
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Jul 2022 12:38:39 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
hw/virtio/virtio-iommu: Enforce power-of-two notify for both MAP and UNMAP
i386/pc: restrict AMD only enforcing of 1Tb hole to new machine type
i386/pc: relocate 4g start to 1T where applicable
i386/pc: bounds check phys-bits against max used GPA
i386/pc: factor out device_memory base/size to helper
i386/pc: handle unitialized mr in pc_get_cxl_range_end()
i386/pc: factor out cxl range start to helper
i386/pc: factor out cxl range end to helper
i386/pc: factor out above-4g end to an helper
i386/pc: pass pci_hole64_size to pc_memory_init()
i386/pc: create pci-host qdev prior to pc_memory_init()
hw/i386: add 4g boundary start to X86MachineState
hw/cxl: Fix size of constant in interleave granularity function.
hw/i386/pc: Always place CXL Memory Regions after device_memory
hw/machine: Clear out left over CXL related pointer from move of state handling to machines.
acpi/nvdimm: Define trace events for NVDIMM and substitute nvdimm_debug()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we only enforce power-of-two mappings (required by the QEMU
notifier) for UNMAP requests. A MAP request not aligned on a
power-of-two may be successfully handled by VFIO, and then the
corresponding UNMAP notify will fail because it will attempt to split
that mapping. Ensure MAP and UNMAP notifications are consistent.
Fixes: dde3f08b5c ("virtio-iommu: Handle non power of 2 range invalidations")
Reported-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220718135636.338264-1-jean-philippe@linaro.org>
Tested-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The added enforcing is only relevant in the case of AMD where the
range right before the 1TB is restricted and cannot be DMA mapped
by the kernel consequently leading to IOMMU INVALID_DEVICE_REQUEST
or possibly other kinds of IOMMU events in the AMD IOMMU.
Although, there's a case where it may make sense to disable the
IOVA relocation/validation when migrating from a
non-amd-1tb-aware qemu to one that supports it.
Relocating RAM regions to after the 1Tb hole has consequences for
guest ABI because we are changing the memory mapping, so make
sure that only new machine enforce but not older ones.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-12-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is assumed that the whole GPA space is available to be DMA
addressable, within a given address space limit, except for a
tiny region before the 4G. Since Linux v5.4, VFIO validates
whether the selected GPA is indeed valid i.e. not reserved by
IOMMU on behalf of some specific devices or platform-defined
restrictions, and thus failing the ioctl(VFIO_DMA_MAP) with
-EINVAL.
AMD systems with an IOMMU are examples of such platforms and
particularly may only have these ranges as allowed:
0000000000000000 - 00000000fedfffff (0 .. 3.982G)
00000000fef00000 - 000000fcffffffff (3.983G .. 1011.9G)
0000010000000000 - ffffffffffffffff (1Tb .. 16Pb[*])
We already account for the 4G hole, albeit if the guest is big
enough we will fail to allocate a guest with >1010G due to the
~12G hole at the 1Tb boundary, reserved for HyperTransport (HT).
[*] there is another reserved region unrelated to HT that exists
in the 256T boundary in Fam 17h according to Errata #1286,
documeted also in "Open-Source Register Reference for AMD Family
17h Processors (PUB)"
When creating the region above 4G, take into account that on AMD
platforms the HyperTransport range is reserved and hence it
cannot be used either as GPAs. On those cases rather than
establishing the start of ram-above-4g to be 4G, relocate instead
to 1Tb. See AMD IOMMU spec, section 2.1.2 "IOMMU Logical
Topology", for more information on the underlying restriction of
IOVAs.
After accounting for the 1Tb hole on AMD hosts, mtree should
look like:
0000000000000000-000000007fffffff (prio 0, i/o):
alias ram-below-4g @pc.ram 0000000000000000-000000007fffffff
0000010000000000-000001ff7fffffff (prio 0, i/o):
alias ram-above-4g @pc.ram 0000000080000000-000000ffffffffff
If the relocation is done or the address space covers it, we
also add the the reserved HT e820 range as reserved.
Default phys-bits on Qemu is TCG_PHYS_ADDR_BITS (40) which is enough
to address 1Tb (0xff ffff ffff). On AMD platforms, if a
ram-above-4g relocation is attempted and the CPU wasn't configured
with a big enough phys-bits, an error message will be printed
due to the maxphysaddr vs maxusedaddr check previously added.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-11-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calculate max *used* GPA against the CPU maximum possible address
and error out if the former surprasses the latter. This ensures
max used GPA is reacheable by configured phys-bits. Default phys-bits
on Qemu is TCG_PHYS_ADDR_BITS (40) which is enough for the CPU to
address 1Tb (0xff ffff ffff) or 1010G (0xfc ffff ffff) in AMD hosts
with IOMMU.
This is preparation for AMD guests with >1010G, where it will want relocate
ram-above-4g to be after 1Tb instead of 4G.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-10-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move obtaining hole64_start from device_memory memory region base/size
into an helper alongside correspondent getters in pc_memory_init() when
the hotplug range is unitialized. While doing that remove the memory
region based logic from this newly added helper.
This is the final step that allows pc_pci_hole64_start() to be callable
at the beginning of pc_memory_init() before any memory regions are
initialized.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-9-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove pc_get_cxl_range_end() dependency on the CXL memory region,
and replace with one that does not require the CXL host_mr to determine
the start of CXL start.
This in preparation to allow pc_pci_hole64_start() to be called early
in pc_memory_init(), handle CXL memory region end when its underlying
memory region isn't yet initialized.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Message-Id: <20220719170014.27028-8-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Factor out the calculation of the base address of the memory region.
It will be used later on for the cxl range end counterpart calculation
and as well in pc_memory_init() CXL memory region initialization, thus
avoiding duplication.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-7-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move calculation of CXL memory region end to separate helper.
This is in preparation to a future change that removes CXL range
dependency on the CXL memory region, with the goal of allowing
pc_pci_hole64_start() to be called before any memory region are
initialized.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-6-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There's a couple of places that seem to duplicate this calculation
of RAM size above the 4G boundary. Move all those to a helper function.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-5-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the pre-initialized pci-host qdev and fetch the
pci-hole64-size into pc_memory_init() newly added argument.
Use PCI_HOST_PROP_PCI_HOLE64_SIZE pci-host property for
fetching pci-hole64-size.
This is in preparation to determine that host-phys-bits are
enough and for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-4-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the start of pc_memory_init() we usually pass a range of
0..UINT64_MAX as pci_memory, when really its 2G (i440fx) or
32G (q35). To get the real user value, we need to get pci-host
passed property for default pci_hole64_size. Thus to get that,
create the qdev prior to memory init to better make estimations
on max used/phys addr.
This is in preparation to determine that host-phys-bits are
enough and also for pci-hole64-size to be considered to relocate
ram-above-4g to be at 1T (on AMD platforms).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-3-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than hardcoding the 4G boundary everywhere, introduce a
X86MachineState field @above_4g_mem_start and use it
accordingly.
This is in preparation for relocating ram-above-4g to be
dynamically start at 1T on AMD platforms.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220719170014.27028-2-joao.m.martins@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously broken_reserved_end was taken into account, but Igor Mammedov
identified that this could lead to a clash between potential RAM being
mapped in the region and CXL usage. Hence always add the size of the
device_memory memory region. This only affects the case where the
broken_reserved_end flag was set.
Fixes: 6e4e3ae936 ("hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)")
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220701132300.2264-3-Jonathan.Cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20220704085852.330005-1-robert.hu@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes the dedicated framebuffer mailbox interface by
removing an unneeded offset. This means that we pick the framebuffer
address in the same way that we do if the guest code uses the buffer
allocate mechanism of the bcm2835_property interface (case
0x00040001: /* Allocate buffer */ in bcm2835_property.c).
The documentation of this mailbox interface doesn't say anything
about using parts of the request buffer address to affect the
chosen framebuffer address:
https://github.com/raspberrypi/firmware/wiki/Mailbox-framebuffer-interface
Some baremetal applications like the Screen01/Screen02 examples from
Baking Pi tutorial[1] didn't work before this patch.
[1] https://www.cl.cam.ac.uk/projects/raspberrypi/tutorials/os/screen01.html
Signed-off-by: Alan Jian <alanjian85@outlook.com>
Message-id: 20220725145838.8412-1-alanjian85@outlook.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJi36ocAAoJEO8Ells5jWIRuOYH/jtaDNGTBs/h8A041gQaCMmw
jufUXHCdKGgmZMpJ/AoCUWx4USdx8hEGSt/j4kvSmIPX+VLuCfLefHDlTxndiWAv
fnUr4NB7LAz2b5D3d5QX1Np+zHG5mHx95KfDIaWdcz9N1HUHlEOakxTDc2EvR1hF
yh8g2n5xdvzK5kWvPcNgJpU/ezDumOFo04JndBb4fIqDmZfW3hvJQ3IKiS3P1J9C
Kbb/usoXGrdoZ9T1R2cqtn1CxrgfMlF2pKJFWzs3nU+ewD9C6oKS4rDQCZxx+JEx
ZvfnSTUPgBBlT4zqZTTjyFQMQdtis5qK5iAKDEENkqVC1iULPhnM9DN0qxcIoQs=
=SpWG
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# gpg: Signature made Tue 26 Jul 2022 09:47:24 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
vdpa: Fix memory listener deletions of iova tree
vhost: Get vring base from vq, not svq
e1000e: Fix possible interrupt loss when using MSI
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost_vdpa_listener_region_del is always deleting the first iova entry
of the tree, since it's using the needle iova instead of the result's
one.
This was detected using a vga virtual device in the VM using vdpa SVQ.
It makes some extra memory adding and deleting, so the wrong one was
mapped / unmapped. This was undetected before since all the memory was
mappend and unmapped totally without that device, but other conditions
could trigger it too:
* mem_region was with .iova = 0, .translated_addr = (correct GPA).
* iova_tree_find_iova returned right result, but does not update
mem_region.
* iova_tree_remove always removed region with .iova = 0. Right iova were
sent to the device.
* Next map will fill the first region with .iova = 0, causing a mapping
with the same iova and device complains, if the next action is a map.
* Next unmap will cause to try to unmap again iova = 0, causing the
device to complain that no region was mapped at iova = 0.
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The SVQ vring used idx usually match with the guest visible one, as long
as all the guest buffers (GPA) maps to exactly one buffer within qemu's
VA. However, as we can see in virtqueue_map_desc, a single guest buffer
could map to many buffers in SVQ vring.
Also, its also a mistake to rewind them at the source of migration.
Since VirtQueue is able to migrate the inflight descriptors, its
responsability of the destination to perform the rewind just in case it
cannot report the inflight descriptors to the device.
This makes easier to migrate between backends or to recover them in
vhost devices that support set in flight descriptors.
Fixes: 6d0b222666 ("vdpa: Adapt vhost_vdpa_get_vring_base to SVQ")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit "e1000e: Prevent MSI/MSI-X storms" introduced msi_causes_pending
to prevent interrupt storms problem. It was tested with MSI-X.
In case of MSI, the guest can rely solely on interrupts to clear ICR.
Upon clearing all pending interrupts, msi_causes_pending gets cleared.
However, when e1000e_itr_should_postpone() in e1000e_send_msi() returns
true, MSI never gets fired by e1000e_intrmgr_on_throttling_timer()
because msi_causes_pending is still set. This results in interrupt loss.
To prevent this, we need to clear msi_causes_pending when MSI is going
to get fired by the throttling timer. The guest can then receive
interrupts eventually.
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tiny machines optimized for fast boot time generally don't use EFI,
which means a random seed has to be supplied some other way. For this
purpose, Linux (≥5.20) supports passing a seed in the setup_data table
with SETUP_RNG_SEED, specially intended for hypervisors, kexec, and
specialized bootloaders. The linked commit shows the upstream kernel
implementation.
At Paolo's request, we don't pass these to versioned machine types ≤7.0.
Link: https://git.kernel.org/tip/tip/c/68b8e9713c8
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220721125636.446842-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This FDT node is part of the DT specification.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220719122033.135902-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This FDT node is part of the DT specification.
I'd do the same for other MIPS platforms but boston is the only one that
seems to use FDT.
Cc: Paul Burton <paulburton@kernel.org>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220719120843.134392-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This FDT node is part of the DT specification.
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220719120113.118034-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJi18PHAAoJEO8Ells5jWIRCEQH+wepXDoT6Q56xmUgxVs+hlAD
CXGy71/cNV08Yu3PTTXo8SYaw+KXxsA9ECgIr2hsfPXarAdoOpJFpZR0HoqIzaXd
kpD6bvwN8bEEOlAHxKcb6/VM+VYntZBfkH9m1WLGx3fHILazLblyL8w2Hkp7NK9J
IBpQQ63uU8Xt0+js96Z/sPOKRjrtbKXFT1bhY2CI8MKZpuqNyED0jZYwbNdnRwZN
fuKbpsaaT4Wxx+mQMg7H7a0e/xx3DNi2F6cAtGLH98WYzbLFgExSSK8G8jnwEVfM
EKWfU7N4zmokq7jN99yvGzjIzLrnLX6yn/ifSs+lQOzdtCA9zEbotI+CDCVdPs4=
=9zus
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# gpg: Signature made Wed 20 Jul 2022 09:58:47 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu: (25 commits)
net/colo.c: fix segmentation fault when packet is not parsed correctly
net/colo.c: No need to track conn_list for filter-rewriter
net/colo: Fix a "double free" crash to clear the conn_list
softmmu/runstate.c: add RunStateTransition support form COLO to PRELAUNCH
vdpa: Add x-svq to NetdevVhostVDPAOptions
vdpa: Add device migration blocker
vdpa: Extract get features part from vhost_vdpa_get_max_queue_pairs
vdpa: Buffer CVQ support on shadow virtqueue
vdpa: manual forward CVQ buffers
vhost-net-vdpa: add stubs for when no virtio-net device is present
vdpa: Export vhost_vdpa_dma_map and unmap calls
vhost: Add svq avail_handler callback
vhost: add vhost_svq_poll
vhost: Expose vhost_svq_add
vhost: add vhost_svq_push_elem
vhost: Track number of descs in SVQDescState
vhost: Add SVQDescState
vhost: Decouple vhost_svq_add from VirtQueueElement
vhost: Check for queue full at vhost_svq_add
vhost: Move vhost_svq_kick call to vhost_svq_add
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the vhost-vdpa device is exposing _F_LOG, adding a migration blocker if
it uses CVQ.
However, qemu is able to migrate simple devices with no CVQ as long as
they use SVQ. To allow it, add a placeholder error to vhost_vdpa, and
only add to vhost_dev when used. vhost_dev machinery place the migration
blocker if needed.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do a simple forwarding of CVQ buffers, the same work SVQ could do but
through callbacks. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Shadow CVQ will copy buffers on qemu VA, so we avoid TOCTOU attacks from
the guest that could set a different state in qemu device model and vdpa
device.
To do so, it needs to be able to map these new buffers to the device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows external handlers to be aware of new buffers that the guest
places in the virtqueue.
When this callback is defined the ownership of the guest's virtqueue
element is transferred to the callback. This means that if the user
wants to forward the descriptor it needs to manually inject it. The
callback is also free to process the command by itself and use the
element with svq_push.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It allows the Shadow Control VirtQueue to wait for the device to use the
available buffers.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows external parts of SVQ to forward custom buffers to the
device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function allows external SVQ users to return guest's available
buffers.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A guest's buffer continuos on GPA may need multiple descriptors on
qemu's VA, so SVQ should track its length sepparatedly.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This will allow SVQ to add context to the different queue elements.
This patch only store the actual element, no functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
VirtQueueElement comes from the guest, but we're heading SVQ to be able
to modify the element presented to the device without the guest's
knowledge.
To do so, make SVQ accept sg buffers directly, instead of using
VirtQueueElement.
Add vhost_svq_add_element to maintain element convenience.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The series need to expose vhost_svq_add with full functionality,
including checking for full queue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The series needs to expose vhost_svq_add with full functionality,
including kick
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Future code needs to call it from vhost_svq_add.
No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In the next patch we will allow busypolling of this value. The compiler
have a running path where shadow_used_idx, last_used_idx, and vring used
idx are not modified within the same thread busypolling.
This was not an issue before since we always cleared device event
notifier before checking it, and that could act as memory barrier.
However, the busypoll needs something similar to kernel READ_ONCE.
Let's add it here, sepparated from the polling.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows external vhost-net devices to modify the state of the
VirtIO device model once the vhost-vdpa device has acknowledged the
control commands.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vhost-vdpa control virtqueue needs to know the maximum entries supported
by the virtio-net device, so we know if it is possible to apply the
filter.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's done for both in and out descriptors so it's better placed here.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add LoongArch flatted device tree, adding cpu device node, firmware cfg node,
pcie node into it, and create fdt rom memory region. Now fdt info is not
full since only uefi bios uses fdt, linux kernel does not use fdt.
Loongarch Linux kernel uses acpi table which is full in qemu virt
machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn>
[rth: Set TARGET_NEED_FDT, add fdt to meson.build]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
